soc/intel/apollolake: Use LPSS common library

Use lpss common library to program reset and
clock register for lpss modules

Change-Id: I75f9aebd60290fbf22684f8cc2ce8e8a4a4304b0
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/19154
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

5 files changed, 12 insertions, 36 deletions

diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index b8af418289..7ec97bf11c 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -53,6 +53,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_ACPI
 	select SOC_INTEL_COMMON_ACPI_WAKE_SOURCE
 	select SOC_INTEL_COMMON_BLOCK
+	select SOC_INTEL_COMMON_BLOCK_LPSS
 	select SOC_INTEL_COMMON_BLOCK_PCR
 	select SOC_INTEL_COMMON_BLOCK_SA
 	select SOC_INTEL_COMMON_BLOCK_RTC
diff --git a/src/soc/intel/apollolake/i2c_early.c b/src/soc/intel/apollolake/i2c_early.c
index bb002748f0..4eb2b86042 100644
--- a/src/soc/intel/apollolake/i2c_early.c
+++ b/src/soc/intel/apollolake/i2c_early.c
@@ -19,6 +19,7 @@
 #include <device/device.h>
 #include <device/i2c.h>
 #include <device/pci_def.h>
+#include <intelblocks/lpss.h>
 #include <soc/intel/common/lpss_i2c.h>
 #include <soc/i2c.h>
 #include <soc/iomap.h>
@@ -32,8 +33,6 @@ static int i2c_early_init_bus(unsigned int bus)
 	pci_devfn_t dev;
 	int devfn;
 	uintptr_t base;
-	uint32_t value;
-	void *reg;
 
 	/* Find the PCI device for this bus controller */
 	devfn = i2c_bus_to_devfn(bus);
@@ -64,10 +63,7 @@ static int i2c_early_init_bus(unsigned int bus)
 			   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 
 	/* Take device out of reset */
-	reg = (void *)(base + I2C_LPSS_REG_RESET);
-	value = read32(reg);
-	value |= I2C_LPSS_RESET_RELEASE_HC;
-	write32(reg, value);
+	lpss_reset_release(base);
 
 	/* Initialize the controller */
 	if (lpss_i2c_init(bus, &config->i2c[bus]) < 0) {
diff --git a/src/soc/intel/apollolake/include/soc/i2c.h b/src/soc/intel/apollolake/include/soc/i2c.h
index f7778e514c..8839f1460a 100644
--- a/src/soc/intel/apollolake/include/soc/i2c.h
+++ b/src/soc/intel/apollolake/include/soc/i2c.h
@@ -20,11 +20,6 @@
 #include <device/pci_def.h>
 #include <soc/pci_devs.h>
 
-/* I2C Controller Reset in MMIO private region */
-#define I2C_LPSS_REG_RESET		0x204
-#define I2C_LPSS_RESET_RELEASE_HC	((1 << 1) | (1 << 0))
-#define I2C_LPSS_RESET_RELEASE_IDMA	(1 << 2)
-
 /* Convert I2C bus number to PCI device and function */
 static inline int i2c_bus_to_devfn(unsigned int bus)
 {
diff --git a/src/soc/intel/apollolake/include/soc/uart.h b/src/soc/intel/apollolake/include/soc/uart.h
index 3c6759c0ac..c7ba4a657a 100644
--- a/src/soc/intel/apollolake/include/soc/uart.h
+++ b/src/soc/intel/apollolake/include/soc/uart.h
@@ -18,16 +18,6 @@
 #ifndef _SOC_APOLLOLAKE_UART_H_
 #define _SOC_APOLLOLAKE_UART_H_
 
-/* Clock is 100MHz * (M / N).*/
-#define UART_CLK		0x200
-# define UART_CLK_UPDATE	(1 << 31)
-# define UART_CLK_DIV_N(n)	(((n) & 0x7fff) << 16)
-# define UART_CLK_DIV_M(m)	(((m) & 0x7fff) << 1)
-# define UART_CLK_EN		(1 << 0)
-#define UART_RESET		0x204
-# define UART_RESET_DMA_EN	(1 << 2)
-# define UART_RESET_UART_EN	(3 << 0)
-
 void lpss_console_uart_init(void);
 
 /* Initialize the console UART including the pads for the configured UART. */
diff --git a/src/soc/intel/apollolake/uart_early.c b/src/soc/intel/apollolake/uart_early.c
index 51aeedfeb6..0a32b715b0 100644
--- a/src/soc/intel/apollolake/uart_early.c
+++ b/src/soc/intel/apollolake/uart_early.c
@@ -17,16 +17,11 @@
 
 #include <console/uart.h>
 #include <device/pci.h>
+#include <intelblocks/lpss.h>
 #include <soc/gpio.h>
 #include <soc/uart.h>
 #include <soc/pci_devs.h>
 
-static void lpss_uart_write(uint16_t reg, uint32_t val)
-{
-	uintptr_t base = CONFIG_CONSOLE_UART_BASE_ADDRESS | reg;
-	write32((void *)base, val);
-}
-
 static inline int invalid_uart_for_console(void)
 {
 	/* There are actually only 2 UARTS, and they are named UART1 and
@@ -38,28 +33,27 @@ static inline int invalid_uart_for_console(void)
 
 void lpss_console_uart_init(void)
 {
-	uint32_t clk_sel;
+	uintptr_t base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
 	device_t uart = _PCH_DEV(UART, CONFIG_UART_FOR_CONSOLE & 3);
 
 	if (invalid_uart_for_console())
 		return;
 
 	/* Enable BAR0 for the UART -- this is where the 8250 registers hide */
-	pci_write_config32(uart, PCI_BASE_ADDRESS_0,
-			   CONFIG_CONSOLE_UART_BASE_ADDRESS);
+	pci_write_config32(uart, PCI_BASE_ADDRESS_0, base);
 
 	/* Enable memory access and bus master */
 	pci_write_config32(uart, PCI_COMMAND,
 			   PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
 
 	/* Take UART out of reset */
-	lpss_uart_write(UART_RESET, UART_RESET_UART_EN);
+	lpss_reset_release(base);
 
-	/* These values get us a 1.836 MHz clock (ideally we want 1.843 MHz) */
-	clk_sel = UART_CLK_DIV_N(0x7fff) | UART_CLK_DIV_M(0x025a);
-	/* Set M and N divisor inputs and enable clock */
-	lpss_uart_write(UART_CLK, clk_sel | UART_CLK_UPDATE);
-	lpss_uart_write(UART_CLK, clk_sel | UART_CLK_EN);
+	/*
+	 * Set M and N divisor inputs and enable clock. These values
+	 * get us a 1.836 MHz clock (ideally we want 1.843 MHz)
+	 */
+	lpss_clk_update(base, 0x025a, 0x7fff);
 
 }