summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorScott Duplichan <scott@notabs.org>2011-06-21 20:05:19 -0500
committerMarc Jones <marcj303@gmail.com>2011-06-22 06:46:14 +0200
commit3c74a2ab2c0d3a454a1b46242cf99ce133d19dc9 (patch)
tree29884e86020158b4bf0977d1a5420f8ed7a2df1c
parentd367b00c5b2f05644e3fae41d4d560720e58cc38 (diff)
downloadcoreboot-3c74a2ab2c0d3a454a1b46242cf99ce133d19dc9.tar.xz
Move SB800 clock init earlier
Committing Scott's e350m1 changes (svn r6585): Move SB800 clock init earlier, Fixes problem where initial serial port output is garbled. Change-Id: If05aa37726b962e8994ee69bf1882fcfae56aa19 Signed-off-by: Scott Duplichan <scott@notabs.org> Signed-off-by: Marshall Buschman <mbuschman@lucidmachines.com> Reviewed-on: http://review.coreboot.org/32 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
-rw-r--r--src/mainboard/asrock/e350m1/romstage.c26
1 files changed, 15 insertions, 11 deletions
diff --git a/src/mainboard/asrock/e350m1/romstage.c b/src/mainboard/asrock/e350m1/romstage.c
index 61de9f6ee8..29df530279 100644
--- a/src/mainboard/asrock/e350m1/romstage.c
+++ b/src/mainboard/asrock/e350m1/romstage.c
@@ -55,6 +55,21 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
// all cores: set pstate 0 (1600 MHz) early to save a few ms of boot time
__writemsr(0xc0010062, 0);
+ if (boot_cpu()) {
+ u8 reg8;
+ // SB800: Program AcpiMmioEn to enable MMIO access to MiscCntrl register
+ outb(0x24, 0xCD6);
+ reg8 = inb(0xCD7);
+ reg8 |= 1;
+ reg8 &= ~(1 << 1);
+ outb(0x24, 0xCD6);
+ outb(reg8, 0xCD7);
+
+ // Program SB800 MiscCntrl
+ *(volatile u32 *)(0xFED80000 + 0xE00 + 0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */
+ *(volatile u32 *)(0xFED80000 + 0xE00 + 0x40) |= 1 << 1; /* 48Mhz */
+ }
+
if (!cpu_init_detectedx && boot_cpu()) {
post_code(0x30);
sb_poweron_init();
@@ -63,17 +78,6 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
}
- //reg8 = pmio_read(0x24);
- outb(0x24, 0xCD6);
- reg8 = inb(0xCD7);
- reg8 |= 1;
- reg8 &= ~(1 << 1);
- //pmio_write(0x24, reg8);
- outb(0x24, 0xCD6);
- outb(reg8, 0xCD7);
-
- *(volatile u32 *)(0xFED80000 + 0xE00 + 0x40) &= ~((1 << 0) | (1 << 2)); /* 48Mhz */
- *(volatile u32 *)(0xFED80000 + 0xE00 + 0x40) |= 1 << 1; /* 48Mhz */
/* Halt if there was a built in self test failure */
post_code(0x34);