summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNico Huber <nico.huber@secunet.com>2019-08-06 18:05:50 +0200
committerPatrick Georgi <pgeorgi@google.com>2019-09-30 11:52:31 +0000
commitb56fcfe9b5b49915c1ae00ac06421fca7a7e2308 (patch)
treeac1304b95952f50017e0f8ddc0f903a1c0acc676
parent9a940bf295337153728e69afdbfee8776170b7bb (diff)
downloadcoreboot-b56fcfe9b5b49915c1ae00ac06421fca7a7e2308.tar.xz
drivers/i2c/lm96000: Add more settings for fan control
Allow to set a lower temperature limit, as the currently hard-coded 25C may be to low for a given temperature sensor. Also enable smoo- thing, currently hard-coded to the maximum interval of 35s, and set the hysteresis value. Change-Id: I5fde1cf909e8fbbaf8a345790b00c58a73c19ef8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35475 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
-rw-r--r--src/drivers/i2c/lm96000/chip.h8
-rw-r--r--src/drivers/i2c/lm96000/lm96000.c11
2 files changed, 15 insertions, 4 deletions
diff --git a/src/drivers/i2c/lm96000/chip.h b/src/drivers/i2c/lm96000/chip.h
index ab782dbbb5..cbf8601146 100644
--- a/src/drivers/i2c/lm96000/chip.h
+++ b/src/drivers/i2c/lm96000/chip.h
@@ -93,6 +93,7 @@ struct lm96000_fan_config {
};
struct lm96000_temp_zone {
+ u8 low_temp; /* temperature for min. duty cycle (in °C) */
u8 target_temp; /* temperature for 100% duty cycle (in °C) */
u8 panic_temp; /* temperature for 100% duty cycle on all fans */
@@ -100,9 +101,12 @@ struct lm96000_temp_zone {
with. (Datasheet clearly states the opposite, that this
is tied to each PWM output so YMMV.) */
enum {
- LM96000_LOW_TEMP_OFF = 0, /* turn fan off below low temp. */
- LM96000_LOW_TEMP_MIN = 1, /* keep PWM at mininum duty cycle */
+ /* turn fan off below `low_temp - hysteresis` */
+ LM96000_LOW_TEMP_OFF = 0,
+ /* keep PWM at mininum duty cycle */
+ LM96000_LOW_TEMP_MIN = 1,
} min_off;
+ u8 hysteresis;
};
/* Implements only those parts currently used by coreboot mainboards. */
diff --git a/src/drivers/i2c/lm96000/lm96000.c b/src/drivers/i2c/lm96000/lm96000.c
index 4a3c2eba14..7fbb31b4e5 100644
--- a/src/drivers/i2c/lm96000/lm96000.c
+++ b/src/drivers/i2c/lm96000/lm96000.c
@@ -156,9 +156,9 @@ static void lm96000_configure_temp_zone(struct device *const dev,
{ 2, 3, 3, 4, 5, 7, 8, 10, 13, 16, 20, 27, 32, 40, 53, 80 };
unsigned int i;
- /* find longest range that starts from 25°C */
+ /* find longest range that starts from `low_temp` */
for (i = ARRAY_SIZE(temp_range) - 1; i > 0; --i) {
- if (temp_range[i] + 25 <= config->target_temp)
+ if (config->low_temp + temp_range[i] <= config->target_temp)
break;
}
@@ -170,9 +170,16 @@ static void lm96000_configure_temp_zone(struct device *const dev,
: 0);
lm96000_write(dev, LM96000_ZONE_TEMP_PANIC(zone),
config->panic_temp ? config->panic_temp : 100);
+ lm96000_update(dev, LM96000_ZONE_SMOOTH(zone),
+ LM96000_ZONE_SMOOTH_MASK(zone),
+ LM96000_ZONE_SMOOTH_EN(zone) | 0); /* 0: 35s */
lm96000_update(dev, LM96000_FAN_MIN_OFF,
LM96000_FAN_MIN(zone),
config->min_off ? LM96000_FAN_MIN(zone) : 0);
+ lm96000_update(dev, LM96000_ZONE_HYSTERESIS(zone),
+ LM96000_ZONE_HYST_MASK(zone),
+ config->hysteresis << LM96000_ZONE_HYST_SHIFT(zone)
+ & LM96000_ZONE_HYST_MASK(zone));
}
static void lm96000_init(struct device *const dev)