summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-03-17 01:22:01 +0000
committerStefan Reinauer <stepan@openbios.org>2010-03-17 01:22:01 +0000
commit052fab995d4957f3736137a53888b0e0e7eab770 (patch)
tree09886f35cc0abb1ffd59c39ab5e1fd3de0a9c3db
parentf9035dd7d8dde1f3173221b4b389dfb4943b63b8 (diff)
downloadcoreboot-052fab995d4957f3736137a53888b0e0e7eab770.tar.xz
remove warnings from cs5530 driver. (trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5234 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/southbridge/amd/cs5530/cs5530_vga.c16
1 files changed, 8 insertions, 8 deletions
diff --git a/src/southbridge/amd/cs5530/cs5530_vga.c b/src/southbridge/amd/cs5530/cs5530_vga.c
index b5182590d5..9347a081b8 100644
--- a/src/southbridge/amd/cs5530/cs5530_vga.c
+++ b/src/southbridge/amd/cs5530/cs5530_vga.c
@@ -237,7 +237,7 @@ static const struct video_mode *modes[] = {
*
* The PLL to program here is located in the CS5530
*/
-static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val)
+static void cs5530_set_clock_frequency(u32 io_base, unsigned long pll_val)
{
unsigned long reg;
@@ -282,7 +282,7 @@ static void cs5530_set_clock_frequency(void *io_base, unsigned long pll_val)
* - 2 (=2MiB) for XGA
* - 4 (=4MiB) for SXGA
*/
-static void dc_setup_layout(void *gx_base, const struct video_mode *mode)
+static void dc_setup_layout(u32 gx_base, const struct video_mode *mode)
{
u32 base = 0x00000000;
@@ -323,7 +323,7 @@ static void dc_setup_layout(void *gx_base, const struct video_mode *mode)
* |#####################################___________________________| line data
* |______________________________________________---------_________| YSYNC
*/
-static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
+static void dc_setup_timing(u32 gx_base, const struct video_mode *mode)
{
u32 hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
u32 vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
@@ -367,7 +367,7 @@ static void dc_setup_timing(void *gx_base, const struct video_mode *mode)
* Must be setup in Geode GX1's chipset.
* Note: This routine assumes unlocked DC registers.
*/
-static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
+static void cs5530_activate_mode(u32 gx_base, const struct video_mode *mode)
{
write32(gx_base + DC_GENERAL_CFG, 0x00000080);
mdelay(1);
@@ -387,7 +387,7 @@ static void cs5530_activate_mode(void *gx_base, const struct video_mode *mode)
* As we now activate the interface this must be done
* in the CS5530
*/
-static void cs5530_activate_video(void *io_base, const struct video_mode *mode)
+static void cs5530_activate_video(u32 io_base, const struct video_mode *mode)
{
u32 val;
@@ -454,10 +454,10 @@ static void show_boot_splash_16(u32 swidth, u32 sheight, u32 pitch,void *base)
static void cs5530_vga_init(device_t dev)
{
const struct video_mode *mode;
- void *io_base, *gx_base;
+ u32 io_base, gx_base;
- io_base = (void*)pci_read_config32(dev, 0x10);
- gx_base = (void*)GX_BASE;
+ io_base = pci_read_config32(dev, 0x10);
+ gx_base = GX_BASE;
mode = modes[CONFIG_GX1_VIDEOMODE];
printk_debug("Setting up video mode %dx%d with %d Hz clock\n",