summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2007-11-02 23:17:57 +0000
committerStefan Reinauer <stepan@openbios.org>2007-11-02 23:17:57 +0000
commit1a0025675fadb73219e6bfa3301af69dcb5f0b8b (patch)
tree1920b2aa4b5a5cf374272e441cb7e0d42ad028c0
parentb45bfabd2a11b0379ef9187bab7f48a24afbc8c9 (diff)
downloadcoreboot-1a0025675fadb73219e6bfa3301af69dcb5f0b8b.tar.xz
Asus A8V-E-SE support from Rudolf Marek
Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2934 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/asus/a8v-e_se/Config.lb274
-rw-r--r--src/mainboard/asus/a8v-e_se/Options.lb313
-rw-r--r--src/mainboard/asus/a8v-e_se/acpi_tables.c169
-rw-r--r--src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c331
-rw-r--r--src/mainboard/asus/a8v-e_se/chip.h24
-rw-r--r--src/mainboard/asus/a8v-e_se/cmos.layout98
-rw-r--r--src/mainboard/asus/a8v-e_se/dsdt.asl245
-rw-r--r--src/mainboard/asus/a8v-e_se/fadt.c151
-rw-r--r--src/mainboard/asus/a8v-e_se/mainboard.c31
-rw-r--r--src/mainboard/asus/a8v-e_se/mptable.c161
-rw-r--r--targets/asus/a8v-e_se/Config.lb62
11 files changed, 1859 insertions, 0 deletions
diff --git a/src/mainboard/asus/a8v-e_se/Config.lb b/src/mainboard/asus/a8v-e_se/Config.lb
new file mode 100644
index 0000000000..55c94edab2
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/Config.lb
@@ -0,0 +1,274 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 AMD
+## Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+ if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+ else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+ end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_PAYLOAD = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+default XIP_ROM_SIZE=65536
+default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+arch i386 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+driver mainboard.o
+
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ object fadt.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dsdt.asl"
+ action "iasl -tc $(MAINBOARD)/dsdt.asl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+end
+
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+#object reset.o
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ makerule ./cache_as_ram_auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ else
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+ end
+
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
+
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ mainboardinit southbridge/via/k8t890/romstrap.inc
+ ldscript /southbridge/via/k8t890/romstrap.lds
+
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
+
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+if USE_DCACHE_RAM
+ ##
+ ## Setup Cache-As-Ram
+ ##
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+###
+### This is the early phase of linuxBIOS startup
+### Things are delicate and we test to see if we should
+### failover to another image.
+###
+
+if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ end
+end
+
+
+##
+## Setup RAM
+##
+if USE_DCACHE_RAM
+
+ if CONFIG_USE_INIT
+ initobject cache_as_ram_auto.o
+ else
+ mainboardinit ./cache_as_ram_auto.inc
+ end
+end
+
+##
+## Include the secondary Configuration files
+##
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+chip northbridge/amd/amdk8/root_complex
+ device apic_cluster 0 on
+ chip cpu/amd/socket_939
+ device apic 0 on end
+ end
+ end
+
+ device pci_domain 0 on
+ chip northbridge/amd/amdk8 #mc0
+ device pci 18.0 on # northbridge
+ # devices on link 0, link 0 == LDT 0
+ chip southbridge/via/vt8237r
+ #both IDE channels
+ register "ide0_enable" = "1"
+ register "ide1_enable" = "1"
+ #both cables are 80pin
+ register "ide0_80pin_cable" = "1"
+ register "ide1_80pin_cable" = "1"
+ #enables the functions of SB
+ register "fn_ctrl_lo" = "0"
+ register "fn_ctrl_hi" = "0xad"
+
+ device pci 0.0 on end # HT
+ device pci f.1 on end # IDE
+ device pci 11.0 on # LPC
+ chip drivers/generic/generic #dimm 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic #dimm 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic #dimm 0-1-1
+ device i2c 53 on end
+ end
+
+ chip superio/winbond/w83627ehg
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Parallel Port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ drq 0x74 = 3
+ end
+ device pnp 2e.2 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.3 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.5 off #keyb OFF
+ end
+ device pnp 2e.6 off # SERIAL_FLASH
+ io 0x60 = 0x100
+ end
+ device pnp 2e.7 off # GAME_MIDI_GIPO1
+ # io 0x60 = 0x220
+ # io 0x62 = 0x300
+ # irq 0x70 = a
+ end
+ device pnp 2e.8 off end # WDTO_PLED
+ device pnp 2e.9 off end # GPIO2_GPIO3_GPIO4_GPIO5 0x30 0x9
+ #GPIO 5 and 2 active
+ #0xe0 = de
+ #0xe1 = 01
+ #0xe2 = 00
+ #0xe3 = 03
+ #0xe4 = a4
+ #0xe5 = 00
+
+ device pnp 2e.a off end # ACPI
+ device pnp 2e.b on # HW Monitor
+ io 0x60 = 0x290
+ irq 0x70 = 0
+ end
+ end #end SIO
+ end #end 11
+
+ device pci 12.0 off end # VIA LAN is disabled, Asus used other chip
+ end
+
+ chip southbridge/via/k8t890
+ end
+
+ end # device pci 18.0
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end #mc0
+
+ end # pci_domain
+
+end # root_complex
diff --git a/src/mainboard/asus/a8v-e_se/Options.lb b/src/mainboard/asus/a8v-e_se/Options.lb
new file mode 100644
index 0000000000..e6b8fbfe6b
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/Options.lb
@@ -0,0 +1,313 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License v2 as published by
+## the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+##uses USE_OPTION_TABLE
+##uses CONFIG_LB_MEM_TOPK
+
+uses HAVE_ACPI_TABLES
+
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses LINUXBIOS_EXTRA_VERSION
+uses _RAMBASE
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+#bx_b001- uses K8_HW_MEM_HOLE_SIZEK
+uses K8_HT_FREQ_1G_SUPPORT
+
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+#bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+#bx_b005+
+uses SB_HT_CHAIN_ON_BUS0
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+#512K bytes
+default ROM_SIZE=512 * 1024
+
+#1M bytes
+#bx- default ROM_SIZE=1024 * 1024
+
+##
+## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
+##
+#256K
+default FALLBACK_SIZE=256 * 1024
+
+###
+### Build options
+###
+
+##
+## Build code for the fallback boot
+##
+default HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+default HAVE_HARD_RESET=0
+
+##
+## Build code to export a programmable irq routing table
+##
+default HAVE_PIRQ_TABLE=0
+default IRQ_SLOT_COUNT=11
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+default HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+default HAVE_OPTION_TABLE=0
+
+##
+## Move the default LinuxBIOS cmos range off of AMD RTC registers
+##
+default LB_CKS_RANGE_START=49
+default LB_CKS_RANGE_END=122
+default LB_CKS_LOC=123
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+default CONFIG_SMP=1
+default CONFIG_MAX_CPUS=2
+default CONFIG_MAX_PHYSICAL_CPUS=1
+default CONFIG_LOGICAL_CPUS=1
+
+#acpi
+default HAVE_ACPI_TABLES=1
+
+#CHIP_NAME ?
+#default CONFIG_CHIP_NAME=1
+
+#1G memory hole
+#bx_b001- default K8_HW_MEM_HOLE_SIZEK=0x100000
+
+#Opteron K8 1G HT Support
+default K8_HT_FREQ_1G_SUPPORT=1
+
+##HT Unit ID offset, default is 1, the typical one
+default HT_CHAIN_UNITID_BASE=0x0
+
+##real SB Unit ID, default is 0x20, mean dont touch it at last
+#default HT_CHAIN_END_UNITID_BASE=0x0
+
+#make the SB HT chain on bus 0, default is not (0)
+#bx_b001- default K8_SB_HT_CHAIN_ON_BUS0=2
+
+##bx_b005+ make the SB HT chain on bus 0
+default SB_HT_CHAIN_ON_BUS0=1
+
+##only offset for SB chain?, default is yes(1)
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0
+
+#VGA
+default CONFIG_CONSOLE_VGA=1
+default CONFIG_PCI_ROM_RUN=1
+
+##
+## enable CACHE_AS_RAM specifics
+##
+default USE_DCACHE_RAM=1
+default DCACHE_RAM_BASE=0xcc000
+default DCACHE_RAM_SIZE=0x4000
+default DCACHE_RAM_GLOBAL_VAR_SIZE=0x01000
+default CONFIG_USE_INIT=0
+
+default ENABLE_APIC_EXT_ID=0
+default APIC_ID_OFFSET=0x10
+default LIFT_BSP_APIC_ID=0
+
+
+##
+## Build code to setup a generic IOAPIC
+##
+default CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+default MAINBOARD_PART_NUMBER="A8V-E SE"
+default MAINBOARD_VENDOR="ASUS"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1043
+#default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x1234
+
+###
+### LinuxBIOS layout values
+###
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+default ROM_IMAGE_SIZE = 64 * 1024
+
+##
+## Use a small 8K stack
+##
+default STACK_SIZE= 8 * 1024
+
+##
+## Use a small 256K heap
+##
+default HEAP_SIZE=256 * 1024
+
+#more 1M for pgtbl
+##default CONFIG_LB_MEM_TOPK=2048
+
+##
+## Only use the option table in a normal image
+##
+##default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## LinuxBIOS C code runs at this location in RAM
+##
+default _RAMBASE=0x00004000
+
+##
+## Load the payload from the ROM
+##
+default CONFIG_ROM_PAYLOAD = 1
+
+###
+### Defaults of options that you may want to override in the target config file
+###
+
+##
+## The default compiler
+##
+default CC="$(CROSS_COMPILE)gcc -m32"
+default HOSTCC="gcc"
+
+##
+## Disable the gdb stub by default
+##
+default CONFIG_GDB_STUB=0
+
+##
+## The Serial Console
+##
+
+# To Enable the Serial Console
+default CONFIG_CONSOLE_SERIAL8250=1
+
+## Select the serial console baud rate
+default TTYS0_BAUD=115200
+#default TTYS0_BAUD=57600
+#default TTYS0_BAUD=38400
+#default TTYS0_BAUD=19200
+#default TTYS0_BAUD=9600
+#default TTYS0_BAUD=4800
+#default TTYS0_BAUD=2400
+#default TTYS0_BAUD=1200
+
+# Select the serial console base port
+default TTYS0_BASE=0x3f8
+
+# Select the serial protocol
+# This defaults to 8 data bits, 1 stop bit, and no parity
+default TTYS0_LCS=0x3
+
+##
+### Select the linuxBIOS loglevel
+##
+## EMERG 1 system is unusable
+## ALERT 2 action must be taken immediately
+## CRIT 3 critical conditions
+## ERR 4 error conditions
+## WARNING 5 warning conditions
+## NOTICE 6 normal but significant condition
+## INFO 7 informational
+## DEBUG 8 debug-level messages
+## SPEW 9 Way too many details
+
+## Request this level of debugging output
+default DEFAULT_CONSOLE_LOGLEVEL=8
+## At a maximum only compile in this level of debugging
+default MAXIMUM_CONSOLE_LOGLEVEL=8
+
+##
+## Select power on after power fail setting
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
+
+### End Options.lb
+end
diff --git a/src/mainboard/asus/a8v-e_se/acpi_tables.c b/src/mainboard/asus/a8v-e_se/acpi_tables.c
new file mode 100644
index 0000000000..55a12f8c39
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/acpi_tables.c
@@ -0,0 +1,169 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ * written by Stefan Reinauer <stepan@openbios.org>
+ * ACPI FADT, FACS, and DSDT table support added by
+ *
+ * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org>
+ * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com>
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci_ids.h>
+
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+#include <../../../southbridge/via/k8t890/k8t890.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ device_t dev;
+ struct resource *res;
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0);
+ if (!dev)
+ return current;
+
+ res = find_resource(dev, K8T890_MMCONFIG_MBAR);
+ if (res) {
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)
+ current, res->base, 0x0, 0x0, 0xff);
+ }
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int gsi_base = 0x18;
+
+ /* create all subtables for processors */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB IOAPIC */
+ current +=
+ acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, VT8237R_APIC_ID,
+ VT8237R_APIC_BASE, 0);
+
+ /* Write NB IOAPIC */
+ current +=
+ acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current, K8T890_APIC_ID,
+ K8T890_APIC_BASE, gsi_base);
+ /* IRQ9 ACPI active low */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* IRQ0 -> APIC IRQ2 */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0x0);
+
+ /* create all subtables for processors */
+ current =
+ acpi_create_madt_lapic_nmis(current,
+ MP_IRQ_TRIGGER_EDGE |
+ MP_IRQ_POLARITY_HIGH, 1);
+
+ return current;
+}
+
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_mcfg_t *mcfg;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16byte */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT Table */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* clear all table memory */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /*
+ * We explicitly add these tables later on:
+ */
+ printk_debug("ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+ dsdt->checksum = 0; // don't trust intel iasl compiler to get this right
+ dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+ printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
+ dsdt->length);
+ printk_debug("ACPI: * FADT\n");
+
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ printk_debug("ACPI: * HPET\n");
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ /* If we want to use HPET Timers Linux wants an MADT */
+ printk_debug("ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ acpi_add_table(rsdt, mcfg);
+
+ /* SRAT */
+ printk_debug("ACPI: * SRAT\n");
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
diff --git a/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c b/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c
new file mode 100644
index 0000000000..c34597201b
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c
@@ -0,0 +1,331 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2006 AMD
+ * Written by Yinghai Lu <yinghailu@amd.com> for AMD.
+ * Copyright (C) 2006 MSI
+ * Written by Bingxun Shi <bingxunshi@gmail.com> for MSI.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+unsigned int get_sbdn(unsigned bus);
+
+//used by raminit
+#define QRANK_DIMM_SUPPORT 1
+
+//used by init_cpus and fidvid
+#define K8_SET_FIDVID 1
+//if we want to wait for core1 done before DQS training, set it to 0
+#define K8_SET_FIDVID_CORE0_ONLY 1
+
+//#define DEBUG_SMBUS 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+
+
+#include "superio/winbond/w83627ehg/w83627ehg_early_serial.c"
+#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
+
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, W83627EHG_SP1)
+#define GPIO_DEV PNP_DEV(0x2e, W83627EHG_GPIO_SUSLED)
+#define RTC_DEV PNP_DEV(0x2e, W83627EHG_RTC)
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#define K8_4RANK_DIMM_SUPPORT 1
+
+#include "northbridge/amd/amdk8/amdk8.h"
+#include "northbridge/amd/amdk8/raminit.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "sdram/generic_sdram.c"
+
+#include "cpu/amd/dualcore/dualcore.c"
+
+#include "southbridge/via/k8t890/k8t890_early_car.c"
+
+#include "cpu/amd/car/copy_and_run.c"
+
+#include "cpu/amd/car/post_cache_as_ram.c"
+
+#include "cpu/amd/model_fxx/init_cpus.c"
+#include "cpu/amd/model_fxx/fidvid.c"
+
+#include "northbridge/amd/amdk8/resourcemap.c"
+
+
+void activate_spd_rom(const struct mem_controller *ctrl)
+{
+
+}
+
+void hard_reset(void)
+{
+ print_info("NO HARD RESET FIX ME!\n");
+}
+
+void soft_reset(void)
+{
+ uint8_t tmp;
+ set_bios_reset();
+ print_debug("soft reset \r\n");
+
+ /* PCI reset */
+ tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f);
+ tmp |= 0x01;
+ pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp);
+
+ while (1) {
+ /* daisy daisy ... */
+ hlt();
+ }
+}
+
+unsigned int get_sbdn(unsigned bus)
+{
+ device_t dev;
+
+ dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), bus);
+ return (dev >> 15) & 0x1f;
+}
+
+#if USE_FALLBACK_IMAGE == 1
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+// unsigned last_boot_normal_x = last_boot_normal();
+//FIXME
+ unsigned last_boot_normal_x = 1;
+ u8 reg;
+
+ pnp_enter_ext_func_mode(SERIAL_DEV);
+ reg = pnp_read_config(SERIAL_DEV, 0x24);
+ pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); /* we have 24MHz input */
+
+ reg = pnp_read_config(SERIAL_DEV, 0x2A);
+ pnp_write_config(SERIAL_DEV, 0x2A, (reg | 1)); /* we have GPIO for KB/MS PIN */
+
+ reg = pnp_read_config(SERIAL_DEV, 0x2C);
+ pnp_write_config(SERIAL_DEV, 0x2C, (reg | 0xf0)); /* we have all RESTOUT and even some reserved bits too */
+
+ pnp_exit_ext_func_mode(SERIAL_DEV);
+
+ pnp_enter_ext_func_mode(GPIO_DEV);
+ pnp_set_logical_device(GPIO_DEV);
+ pnp_write_config(GPIO_DEV, 0xe0, 0xde); // 1101110 0=output 1=input
+ pnp_write_config(GPIO_DEV, 0xe1, 0x1); //set output val
+ pnp_write_config(GPIO_DEV, 0xe2, 0x0); //no inversion
+ pnp_write_config(GPIO_DEV, 0xe3, 0x3); //0000 0011 0=output 1=input
+ pnp_write_config(GPIO_DEV, 0xe4, 0xa4); //set output val
+ pnp_write_config(GPIO_DEV, 0xe5, 0x0); //no inversion
+ pnp_write_config(GPIO_DEV, 0x30, 0x9); //Enable GPIO 2 & GPIO 5
+ pnp_exit_ext_func_mode(GPIO_DEV);
+
+
+ w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ print_info("now booting... fallback\r\n");
+
+ /* Is this a cpu only reset? or Is this a secondary cpu? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ }
+
+ /* Nothing special needs to be done to find bus 0 */
+ /* Allow the HT devices to be found */
+
+ enumerate_ht_chain();
+
+ /* Is this a deliberate reset by the bios */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary cpu how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+ normal_image:
+ //print_info("JMP normal image\r\n");
+
+ __asm__ volatile ("jmp __normal_image": /* outputs */
+ :"a" (bist), "b"(cpu_init_detectedx) /* inputs */
+ );
+
+ fallback_image:
+ ;
+}
+#endif
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist,
+ unsigned long cpu_init_detectedx)
+{
+
+#if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+#endif
+ real_main(bist, cpu_init_detectedx);
+
+}
+
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ static const uint16_t spd_addr[] = {
+ (0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
+ (0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ (0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
+ (0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
+#endif
+ };
+ unsigned bsp_apicid = 0;
+ int needs_reset = 0;
+ struct sys_info *sysinfo =
+ (DCACHE_RAM_BASE + DCACHE_RAM_SIZE -
+ DCACHE_RAM_GLOBAL_VAR_SIZE);
+ char *p;
+ u8 reg;
+
+ pnp_enter_ext_func_mode(SERIAL_DEV);
+ reg = pnp_read_config(SERIAL_DEV, 0x24);
+ pnp_write_config(SERIAL_DEV, 0x24, (reg & ~0x40)); /* we have 24MHz input */
+
+ reg = pnp_read_config(SERIAL_DEV, 0x2A);
+ pnp_write_config(SERIAL_DEV, 0x2A, (reg | 1)); /* we have GPIO for KB/MS PIN */
+
+ reg = pnp_read_config(SERIAL_DEV, 0x2C);
+ pnp_write_config(SERIAL_DEV, 0x2C, (reg | 0xf0)); /* we have all RESTOUT and even some reserved bits too */
+
+ pnp_exit_ext_func_mode(SERIAL_DEV);
+
+ pnp_enter_ext_func_mode(GPIO_DEV);
+ pnp_set_logical_device(GPIO_DEV);
+ pnp_write_config(GPIO_DEV, 0xe0, 0xde); // 1101110 0=output 1=input
+ pnp_write_config(GPIO_DEV, 0xe1, 0x1); //set output val
+ pnp_write_config(GPIO_DEV, 0xe2, 0x0); //no inversion
+ pnp_write_config(GPIO_DEV, 0xe3, 0x3); //0000 0011 0=output 1=input
+ pnp_write_config(GPIO_DEV, 0xe4, 0xa4); //set output val
+ //0x10 seems to control something with SGD VIA
+
+ pnp_write_config(GPIO_DEV, 0xe5, 0x0); //no inversion
+ pnp_write_config(GPIO_DEV, 0x30, 0x9); //Enable GPIO 2 & GPIO 5
+ pnp_exit_ext_func_mode(GPIO_DEV);
+
+
+ w83627ehg_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+
+ print_info("now booting... real_main\r\n");
+
+ if (bist == 0) {
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+ }
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+ setup_default_resource_map();
+ setup_coherent_ht_domain();
+ wait_all_core0_started();
+ print_info("now booting... Core0 started\r\n");
+
+#if CONFIG_LOGICAL_CPUS==1
+ // It is said that we should start core1 after all core0 launched
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
+#endif
+ init_timer();
+ ht_setup_chains_x(sysinfo); // it will init sblnk and sbbusn, nodes, sbdn
+ needs_reset = optimize_link_coherent_ht();
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+
+ /* Fixme it assumes that 1000MHz LDT is selected. */
+ needs_reset |= k8t890_early_setup_car(16, 0x6);
+
+ if (needs_reset) {
+ print_debug("ht reset -\r\n");
+ soft_reset();
+ }
+ /* stop the APs so we can start them later in init */
+ allow_all_aps_stop(bsp_apicid);
+ /* It's the time to set ctrl now; */
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ enable_smbus();
+ memreset_setup();
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+ post_cache_as_ram();
+}
+
diff --git a/src/mainboard/asus/a8v-e_se/chip.h b/src/mainboard/asus/a8v-e_se/chip.h
new file mode 100644
index 0000000000..093acc2c38
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/chip.h
@@ -0,0 +1,24 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_asus_a8v_e_se_ops;
+
+struct mainboard_asus_a8v_e_se_config {
+
+};
diff --git a/src/mainboard/asus/a8v-e_se/cmos.layout b/src/mainboard/asus/a8v-e_se/cmos.layout
new file mode 100644
index 0000000000..ecf89a9b5d
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 DDR400
+8 1 DDR333
+8 2 DDR266
+8 3 DDR200
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/asus/a8v-e_se/dsdt.asl b/src/mainboard/asus/a8v-e_se/dsdt.asl
new file mode 100644
index 0000000000..63862223d0
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/dsdt.asl
@@ -0,0 +1,245 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Minimalist ACPI DSDT table for EPIA-M / MII
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ *
+ * (C) Copyright 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
+{
+
+
+
+
+ /*
+ * Define the main processor
+ */
+ Scope (\_PR)
+ {
+ Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {}
+ Processor (\_PR.CPU1, 0x01, 0x000000, 0x00) {}
+ }
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * any others would involve declaring the wake up methods
+ */
+ Name (\_S0, Package () {0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () {0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* top PCI device */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ /* PCI Routing Table */
+ //aaa
+ Name (_PRT, Package () {
+ Package (0x04) { 0x000BFFFF, 0x00, 0x00, 0x10 }, //slot 0xB
+ Package (0x04) { 0x000BFFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x000BFFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x000BFFFF, 0x03, 0x00, 0x13 },
+ Package (0x04) { 0x000CFFFF, 0x00, 0x00, 0x11 }, //Slot 0xC
+ Package (0x04) { 0x000CFFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x000CFFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x000CFFFF, 0x03, 0x00, 0x10 },
+ Package (0x04) { 0x000DFFFF, 0x00, 0x00, 0x12 }, //Slot 0xD
+ Package (0x04) { 0x000DFFFF, 0x01, 0x00, 0x13 },
+ Package (0x04) { 0x000DFFFF, 0x02, 0x00, 0x10 },
+ Package (0x04) { 0x000DFFFF, 0x03, 0x00, 0x11 },
+ Package (0x04) { 0x000F0000, 0x01, 0x00, 0x14 }, //0xf SATA IRQ 20
+ Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, //0xf NAtive IDE IRQ 20
+ Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, //USB routing
+ Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 },
+ Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 },
+ Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 },
+ Package (0x04) { 0x0011FFFF, 0x02, 0x00, 0x16 }, //AC97 MC97
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, //PCIE16 bridge IRQ27
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B },
+ Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B },
+ Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B },
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, //PCIE bridge IRQ31
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, //IRQ36
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, //IRQ39
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } //IRQ43
+ })
+
+
+ Device (PEGG)
+ {
+ Name (_ADR, 0x00020000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, //PCIE IRQ24-IRQ27
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B },
+ })
+ } //end of PCIEG
+
+ Device (PEX0)
+ {
+ Name (_ADR, 0x00030000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x03)
+
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, //PCIE IRQ28-IRQ31
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F },
+ })
+ } //end of PEX0
+
+ Device (PEX1)
+ {
+ Name (_ADR, 0x00030001)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x04)
+
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x20 }, //PCIE IRQ32-IRQ35
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x21 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x22 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x23 },
+ })
+ } //end f PEX1
+
+ Device (PEX2)
+ {
+ Name (_ADR, 0x00030002)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x05)
+
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x24 }, //PCIE IRQ36-IRQ39
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x25 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x26 },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x27 },
+ })
+ } //end f PEX2
+
+ Device (PEX3)
+ {
+ Name (_ADR, 0x00030003)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x06)
+
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x28 }, //PCIE IRQ40-IRQ43
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x29 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x2A },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x2B },
+ })
+ } //end f PEX3
+
+ Device (ISA) {
+ Name (_ADR, 0x00110000)
+
+ /* Keyboard seems to be important for WinXP install */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate ()
+ {
+ IO (Decode16,
+ 0x0060, // Address Range Minimum
+ 0x0060, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x01, // Address Length
+ )
+ IO (Decode16,
+ 0x0064, // Address Range Minimum
+ 0x0064, // Address Range Maximum
+ 0x01, // Address Alignment
+ 0x01, // Address Length
+ )
+ IRQNoFlags ()
+ {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate ()
+ {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0F)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate ()
+ {
+ IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04)
+ IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ } //FD END
+
+ } //ISA END
+
+ } // End of PCI0
+
+
+ } // End of _SB
+
+} // End of Definition Block
+
diff --git a/src/mainboard/asus/a8v-e_se/fadt.c b/src/mainboard/asus/a8v-e_se/fadt.c
new file mode 100644
index 0000000000..d4e3003512
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/fadt.c
@@ -0,0 +1,151 @@
+/*
+ * ACPI - create the Fixed ACPI Description Tables (FADT)
+ * (C) Copyright 2004 Nick Barker <nick.barker9@btinternet.com>
+ * (C) Copyright 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <arch/acpi.h>
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+
+void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id, "LXBIOS", 6);
+ memcpy(header->oem_table_id, "LXBACPI ", 8);
+ memcpy(header->asl_compiler_id, "IASL", 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = facs;
+ fadt->dsdt = dsdt;
+ fadt->preferred_pm_profile = 0;
+ fadt->sci_int = 9;
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0;
+ fadt->acpi_disable = 0;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0x0;
+
+ fadt->pm1a_evt_blk = VT8237R_ACPI_IO_BASE;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = VT8237R_ACPI_IO_BASE + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = 0x0;
+ fadt->pm_tmr_blk = VT8237R_ACPI_IO_BASE + 0x8;
+ fadt->gpe0_blk = VT8237R_ACPI_IO_BASE + 0x20;
+ fadt->gpe1_blk = 0x0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 4;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0;
+ fadt->p_lvl2_lat = 90;
+ fadt->p_lvl3_lat = 900;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 0;
+ fadt->duty_width = 1; //??
+ fadt->day_alrm = 0x7d;
+ fadt->mon_alrm = 0x7e;
+ fadt->century = 0x32;
+ /* fixme 5 - 10 */
+ fadt->iapc_boot_arch = 0x1;
+ /* fixme */
+ fadt->flags = 0x4a5;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 4;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = VT8237R_ACPI_IO_BASE;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 2;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = VT8237R_ACPI_IO_BASE + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = 0x0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 4;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = VT8237R_ACPI_IO_BASE + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 0;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = VT8237R_ACPI_IO_BASE + 0x20;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum =
+ acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/mainboard/asus/a8v-e_se/mainboard.c b/src/mainboard/asus/a8v-e_se/mainboard.c
new file mode 100644
index 0000000000..a032639847
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/mainboard.c
@@ -0,0 +1,31 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_asus_a8v_e_se_ops = {
+ CHIP_NAME("ASUS A8V-E SE Mainboard")
+};
+#endif
diff --git a/src/mainboard/asus/a8v-e_se/mptable.c b/src/mainboard/asus/a8v-e_se/mptable.c
new file mode 100644
index 0000000000..1b2d83a3ae
--- /dev/null
+++ b/src/mainboard/asus/a8v-e_se/mptable.c
@@ -0,0 +1,161 @@
+/*
+ * This file is part of the LinuxBIOS project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <arch/smp/mpspec.h>
+#include <string.h>
+#include <stdint.h>
+
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+#include <../../../southbridge/via/k8t890/k8t890.h>
+
+void *smp_write_config_table(void *v)
+{
+ static const char sig[4] = "PCMP";
+ static const char oem[8] = "LNXB ";
+ static const char productid[12] = "A8V-E SE ";
+ struct mp_config_table *mc;
+ unsigned int conforms = 0;
+ int bus_isa = 42;
+
+ mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
+ memset(mc, 0, sizeof(*mc));
+
+ memcpy(mc->mpc_signature, sig, sizeof(sig));
+ mc->mpc_length = sizeof(*mc); /* initially just the header */
+ mc->mpc_spec = 0x04;
+ mc->mpc_checksum = 0; /* not yet computed */
+ memcpy(mc->mpc_oem, oem, sizeof(oem));
+ memcpy(mc->mpc_productid, productid, sizeof(productid));
+ mc->mpc_oemptr = 0;
+ mc->mpc_oemsize = 0;
+ mc->mpc_entry_count = 0; /* No entries yet... */
+ mc->mpc_lapic = LAPIC_ADDR;
+ mc->mpe_length = 0;
+ mc->mpe_checksum = 0;
+ mc->reserved = 0;
+
+ smp_write_processors(mc);
+
+
+/*Bus: Bus ID Type*/
+ smp_write_bus(mc, 0, "PCI ");
+ smp_write_bus(mc, 1, "PCI ");
+ smp_write_bus(mc, 2, "PCI ");
+ smp_write_bus(mc, 3, "PCI ");
+ smp_write_bus(mc, 4, "PCI ");
+ smp_write_bus(mc, 5, "PCI ");
+ smp_write_bus(mc, 6, "PCI ");
+ smp_write_bus(mc, bus_isa, "ISA ");
+/*I/O APICs: APIC ID Version State Address*/
+
+ smp_write_ioapic(mc, VT8237R_APIC_ID, 0x20, VT8237R_APIC_BASE);
+ smp_write_ioapic(mc, K8T890_APIC_ID, 0x20, K8T890_APIC_BASE);
+
+
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, VT8237R_APIC_ID, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, VT8237R_APIC_ID, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, VT8237R_APIC_ID, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, VT8237R_APIC_ID, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x5, VT8237R_APIC_ID, 0x5);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, VT8237R_APIC_ID, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, VT8237R_APIC_ID, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, VT8237R_APIC_ID, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x9, VT8237R_APIC_ID, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xa, VT8237R_APIC_ID, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xb, VT8237R_APIC_ID, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, VT8237R_APIC_ID, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, VT8237R_APIC_ID, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, VT8237R_APIC_ID, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, VT8237R_APIC_ID, 0xf);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 0, VT8237R_APIC_ID, 0x10); //IRQ16
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 1, VT8237R_APIC_ID, 0x11); //IRQ17
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 2, VT8237R_APIC_ID, 0x12); //IRQ18
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xb << 2) | 3, VT8237R_APIC_ID, 0x13); //IRQ19
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 0, VT8237R_APIC_ID, 0x11); //IRQ17
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 1, VT8237R_APIC_ID, 0x12); //IRQ18
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 2, VT8237R_APIC_ID, 0x13); //IRQ19
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xc << 2) | 3, VT8237R_APIC_ID, 0x10); //IRQ16
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 0, VT8237R_APIC_ID, 0x12); //IRQ18
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 1, VT8237R_APIC_ID, 0x13); //IRQ19
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 2, VT8237R_APIC_ID, 0x10); //IRQ16
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xd << 2) | 3, VT8237R_APIC_ID, 0x11); //IRQ17
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 0, VT8237R_APIC_ID, 0x14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0xf << 2) | 1, VT8237R_APIC_ID, 0x14);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 0, VT8237R_APIC_ID, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 1, VT8237R_APIC_ID, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x10 << 2) | 2, VT8237R_APIC_ID, 0x15);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x11 << 2) | 2, VT8237R_APIC_ID, 0x16);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 0, K8T890_APIC_ID, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 1, K8T890_APIC_ID, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 2, K8T890_APIC_ID, 0x3);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x2 << 2) | 3, K8T890_APIC_ID, 0x3);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 0, K8T890_APIC_ID, 0x7);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 1, K8T890_APIC_ID, 0xb);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 2, K8T890_APIC_ID, 0xf);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x0, (0x3 << 2) | 3, K8T890_APIC_ID, 0x13);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 0, K8T890_APIC_ID, 0x0);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 1, K8T890_APIC_ID, 0x1);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 2, K8T890_APIC_ID, 0x2);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x2, (0x00 << 2) | 3, K8T890_APIC_ID, 0x3);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 0, K8T890_APIC_ID, 0x4);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 1, K8T890_APIC_ID, 0x5);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 2, K8T890_APIC_ID, 0x6);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x3, (0x00 << 2) | 3, K8T890_APIC_ID, 0x7);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 0, K8T890_APIC_ID, 0x8);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 1, K8T890_APIC_ID, 0x9);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 2, K8T890_APIC_ID, 0xa);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, (0x00 << 2) | 3, K8T890_APIC_ID, 0xb);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 0, K8T890_APIC_ID, 0xc);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 1, K8T890_APIC_ID, 0xd);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 2, K8T890_APIC_ID, 0xe);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x5, (0x00 << 2) | 3, K8T890_APIC_ID, 0xf);
+
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 0, K8T890_APIC_ID, 0x10);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 1, K8T890_APIC_ID, 0x11);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 2, K8T890_APIC_ID, 0x12);
+ smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x6, (0x00 << 2) | 3, K8T890_APIC_ID, 0x13);
+
+/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
+ smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
+ smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
+ /* There is no extension information... */
+
+ /* Compute the checksums */
+ mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
+ mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
+ return smp_next_mpe_entry(mc);
+}
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ void *v;
+ v = smp_write_floating_table(addr);
+ return (unsigned long)smp_write_config_table(v);
+}
diff --git a/targets/asus/a8v-e_se/Config.lb b/targets/asus/a8v-e_se/Config.lb
new file mode 100644
index 0000000000..d8c4c61c36
--- /dev/null
+++ b/targets/asus/a8v-e_se/Config.lb
@@ -0,0 +1,62 @@
+##
+## This file is part of the LinuxBIOS project.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License v2 as published by
+## the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+target a8v-e_se
+mainboard asus/a8v-e_se
+
+romimage "normal"
+# 48K for SCSI FW
+# option ROM_SIZE = 475136
+# option ROM_SIZE = 512*1024-36*1024
+ option ROM_SIZE = 512*1024
+# 48K for SCSI FW and 48K for ATI ROM
+# option ROM_SIZE = 425984
+# 64K for Etherboot
+# option ROM_SIZE = 458752
+# option USE_FAILOVER_IMAGE=0
+ option USE_FALLBACK_IMAGE=0
+
+# option ROM_IMAGE_SIZE=0x13800
+# option ROM_IMAGE_SIZE=0x18800
+ option ROM_IMAGE_SIZE=0x20000
+# option ROM_IMAGE_SIZE=0x15800
+ option XIP_ROM_SIZE=0x40000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Normal"
+
+# give path to filo.elf if needed
+ payload filo.elf
+end
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE=1
+# option USE_FAILOVER_IMAGE=0
+
+# option ROM_IMAGE_SIZE=0x13800
+# option ROM_IMAGE_SIZE=0x19800
+ option ROM_IMAGE_SIZE=0x20000
+# option ROM_IMAGE_SIZE=0x15800
+ option XIP_ROM_SIZE=0x40000
+ option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Fallback"
+
+# give path to filo.elf if needed
+
+ payload filo.elf
+end
+
+buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"