mb/google/volteer/variants/eldrid: add memory.c for ddr4 support

Add new memory.c to support DDR4 memory types.

Use the new meminit_ddr() and variant_memory_sku() for eldrid variant
code on memory.c

The initial settings override the baseboard from volteer and fine tune
gpio.c and overridetree.cb on eldrid's configuration.

BUG=b:161772961
TEST='emerge-volteer coreboot chromeos-bootimage' and verify that Eldrid
can boots. NOTE that tests the ddr4 side of the implementation.

Change-Id: I2c7b30093a8d85bac5aba5b83768af5eb36c4f70
Signed-off-by: Nick Chen <nick_xr_chen@wistron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44632
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>

4 files changed, 385 insertions, 2 deletions

diff --git a/src/mainboard/google/volteer/variants/eldrid/Makefile.inc b/src/mainboard/google/volteer/variants/eldrid/Makefile.inc
new file mode 100644
index 0000000000..343c7dbb95
--- /dev/null
+++ b/src/mainboard/google/volteer/variants/eldrid/Makefile.inc
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+romstage-y += memory.c
+
+bootblock-y += gpio.c
+
+ramstage-y += gpio.c
diff --git a/src/mainboard/google/volteer/variants/eldrid/gpio.c b/src/mainboard/google/volteer/variants/eldrid/gpio.c
new file mode 100644
index 0000000000..aeccfaba5d
--- /dev/null
+++ b/src/mainboard/google/volteer/variants/eldrid/gpio.c
@@ -0,0 +1,217 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <commonlib/helpers.h>
+
+/* Pad configuration in ramstage */
+static const struct pad_config override_gpio_table[] = {
+	/* A7  : I2S2_SCLK ==> EN_PP3300_TRACKPAD */
+	PAD_CFG_GPO(GPP_A7, 1, DEEP),
+	/* A8  : I2S2_SFRM ==> EN_PP3300_TOUCHSCREEN */
+	PAD_CFG_GPO(GPP_A8, 0, DEEP),
+	/* A10 : I2S2_RXD ==> EN_SPKR_PA */
+	PAD_CFG_GPO(GPP_A10, 1, DEEP),
+	/* A13 : PMC_I2C_SCL ==> BT_DISABLE_L */
+	PAD_CFG_GPO(GPP_A13, 1, DEEP),
+	/* A15 : USB_OC2# ==> NC */
+	PAD_NC(GPP_A15, NONE),
+	/* A16 : USB_OC3# ==> USB_C0_OC_ODL */
+	PAD_CFG_NF(GPP_A16, NONE, DEEP, NF1),
+	/* A19 : DDSP_HPD1 ==> USB_C0_DP_HPD */
+	PAD_CFG_NF(GPP_A19, NONE, DEEP, NF1),
+	/* A20 : DDSP_HPD2 ==> USB_C1_DP_HPD */
+	PAD_CFG_NF(GPP_A20, NONE, DEEP, NF1),
+	/* A21 : DDPC_CTRCLK ==> EN_FP_PWR */
+	PAD_CFG_GPO(GPP_A21, 1, DEEP),
+	/* A23 : I2S1_SCLK ==> I2S1_SPKR_SCLK */
+	PAD_CFG_NF(GPP_A23, NONE, DEEP, NF1),
+
+	/* B2  : VRALERT# ==> EN_PP3300_SSD */
+	PAD_CFG_NF(GPP_B2, NONE, DEEP, NF1),
+	/* B7  : ISH_12C1_SDA ==> ISH_I2C0_SENSOR_SDA */
+	PAD_CFG_NF(GPP_B7, NONE, DEEP, NF1),
+	/* B8  : ISH_I2C1_SCL ==> ISH_I2C0_SENSOR_SCL */
+	PAD_CFG_NF(GPP_B8, NONE, DEEP, NF1),
+	/* B9  : I2C5_SDA ==> PCH_I2C5_TRACKPAD_SDA */
+	PAD_CFG_NF(GPP_B9, NONE, DEEP, NF1),
+	/* B10 : I2C5_SCL ==> PCH_I2C5_TRACKPAD_SCL */
+	PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1),
+	/* B19 : GSPI1_CS0# ==> PCH_GSPI1_FPMCU_CS_L */
+	PAD_CFG_NF(GPP_B19, NONE, DEEP, NF1),
+	/* B20 : GSPI1_CLK ==> PCH_GSPI1_FPMCU_CLK */
+	PAD_CFG_NF(GPP_B20, NONE, DEEP, NF1),
+	/* B21 : GSPI1_MISO ==> PCH_GSPI1_FPMCU_MISO */
+	PAD_CFG_NF(GPP_B21, NONE, DEEP, NF1),
+
+	/* C0  : SMBCLK ==> EN_PP3300_WLAN */
+	PAD_CFG_GPO(GPP_C0, 1, DEEP),
+	/* C5  : SML0ALERT# ==> GPP_C5_BOOT_STRAP_0 */
+	PAD_CFG_GPI(GPP_C5, NONE, DEEP),
+	/* C10 : UART0_RTS# ==> USI_RST_L */
+	PAD_CFG_GPO(GPP_C10, 0, DEEP),
+	/* C16 : I2C0_SDA ==> PCH_I2C0_1V8_AUDIO_SDA */
+	PAD_CFG_NF(GPP_C16, NONE, DEEP, NF1),
+	/* C17 : I2C0_SCL ==> PCH_I2C0_1V8_AUDIO_SCL */
+	PAD_CFG_NF(GPP_C17, NONE, DEEP, NF1),
+	/* C18 : I2C1_SDA ==> PCH_I2C1_TOUCH_USI_SDA */
+	PAD_CFG_NF(GPP_C18, NONE, DEEP, NF1),
+	/* C19 : I2C1_SCL ==> PCH_I2C1_TOUCH_USI_SCL */
+	PAD_CFG_NF(GPP_C19, NONE, DEEP, NF1),
+	/* C20 : UART2_RXD ==> FPMCU_INT_L */
+	/* APIC interrupt conflict, so used GPI_INT; see b/147500717 */
+	PAD_CFG_GPI_INT(GPP_C20, NONE, PLTRST, LEVEL),
+	/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
+	PAD_CFG_GPO(GPP_C22, 0, DEEP),
+	/* C23 : UART2_CTS# ==> FPMCU_RST_ODL */
+	PAD_CFG_GPO(GPP_C23, 1, DEEP),
+
+	/* D4  : IMGCLKOUT0# ==> CAMMERA_SWITCH */
+	PAD_CFG_GPI(GPP_D4, NONE, DEEP),
+	/* D6  : SRCCLKREQ1# ==> WLAN_CLKREQ_ODL */
+	PAD_CFG_NF(GPP_D6, NONE, DEEP, NF1),
+	/* D8  : SRCCLKREQ3# ==> SD_CLKREQ_ODL */
+	PAD_CFG_NF(GPP_D8, NONE, DEEP, NF1),
+	/* D12 : ISH_SPI_MOSI ==> PCH_GSPI2_CVF_MOSI_STRAP */
+	PAD_CFG_NF(GPP_D12, NONE, DEEP, NF1),
+	/* D13 : ISH_UART0_RXD ==> NC */
+	PAD_NC(GPP_D13, NONE),
+	/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
+	PAD_CFG_GPO(GPP_D16, 1, DEEP),
+	/* D17 : ISH_GP4 ==> EN_FCAM_PWR */
+	PAD_CFG_GPO(GPP_D17, 1, DEEP),
+
+	/* E2  : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */
+	PAD_CFG_GPI(GPP_E2, NONE, DEEP),
+	/* E3  : CPU_GP0 ==> USI_REPORT_EN */
+	PAD_CFG_GPO(GPP_E3, 1, DEEP),
+	/* E4  : SATA_DEVSLP0 ==> M2_SSD_PE_WAKE_ODL */
+	PAD_CFG_GPI(GPP_E4, NONE, DEEP),
+	/* E6  : THC0_SPI1_RST# ==> GPP_E6_STRAP */
+	PAD_CFG_GPI(GPP_E6, NONE, DEEP),
+	/* E7  : CPU_GP1 ==> USI_INT */
+	PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE),
+	/* E8  : SPI1_CS1# ==> SLP_S0IX */
+	PAD_CFG_GPO(GPP_E8, 0, DEEP),
+	/* E10 : SPI1_CS# ==> USB_C0_AUXP_DC */
+	PAD_CFG_NF(GPP_E10, NONE, DEEP, NF6),
+	/* E11 : SPI1_CLK ==> SD_PE_WAKE_ODL */
+	PAD_CFG_GPI(GPP_E11, NONE, DEEP),
+	/* E13 : SPI1_MOSI_IO0 ==> USB_C0_AUXN_DC */
+	PAD_CFG_NF(GPP_E13, NONE, DEEP, NF6),
+	/* E15 : ISH_GP6 ==> TRACKPAD_INT_ODL */
+	PAD_CFG_GPI_IRQ_WAKE(GPP_E15, NONE, DEEP, LEVEL, INVERT),
+	/* E20 : DDP2_CTRLCLK ==> NC */
+	PAD_NC(GPP_E20, NONE),
+	/* E21 : DDP2_CTRLDATA ==> NC */
+	PAD_NC(GPP_E21, NONE),
+	/* E22 : DDPA_CTRLCLK ==> USB_C1_AUXP_DC: Retimer FW drives this pin */
+	PAD_CFG_GPO(GPP_E22, 1, DEEP),
+	/* E23 : DDPA_CTRLDATA ==> USB_C1_AUXN_DC: Retimer FW drives this pin */
+	PAD_CFG_GPO(GPP_E23, 1, DEEP),
+
+	/* F7  : GPPF7_STRAP ==> GPP_F7_STRAP */
+	PAD_CFG_GPI(GPP_F7, NONE, DEEP),
+	/* F8  : I2S_MCLK2_INOUT ==> HP_INT_L */
+	PAD_CFG_GPI_INT(GPP_F8, NONE, PLTRST, EDGE_BOTH),
+	/* F10 : GPPF10_STRAP ==> GPP_F10_STRAP */
+	PAD_CFG_GPI(GPP_F10, NONE, DEEP),
+	/* F11 : THC1_SPI2_CLK ==> NC */
+	PAD_NC(GPP_F11, NONE),
+	/* F12 : GSXDOUT ==> NC */
+	PAD_NC(GPP_F12, NONE),
+	/* F13 : GSXDOUT ==> WiFi_DISABLE_L */
+	PAD_CFG_GPO(GPP_F13, 1, DEEP),
+
+	/* H0  : GPPH0_BOOT_STRAP1 */
+	PAD_CFG_GPI(GPP_H0, NONE, DEEP),
+	/* H1  : GPPH1_BOOT_STRAP2 */
+	PAD_CFG_GPI(GPP_H1, NONE, DEEP),
+	/* H2  : GPPH2_BOOT_STRAP3 */
+	PAD_CFG_GPI(GPP_H2, NONE, DEEP),
+	/* H3  : SX_EXIT_HOLDOFF# ==> SD_PERST_L */
+	PAD_CFG_GPO(GPP_H3, 1, DEEP),
+	/* H4  : I2C2_SDA ==> NC */
+	PAD_NC(GPP_H4, NONE),
+	/* H5  : I2C2_SCL ==> NC */
+	PAD_NC(GPP_H5, NONE),
+	/* H10 : SRCCLKREQ4# ==> NC */
+	PAD_NC(GPP_H10, NONE),
+	/* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */
+	PAD_CFG_GPO(GPP_H11, 1, DEEP),
+
+	/* R0 : HDA_BCLK ==> I2S0_HP_SCLK */
+	PAD_CFG_NF(GPP_R0, NONE, DEEP, NF2),
+	/* R1 : HDA_SYNC ==> I2S0_HP_SFRM */
+	PAD_CFG_NF(GPP_R1, NONE, DEEP, NF2),
+	/* R2 : HDA_SDO ==> I2S0_PCH_TX_HP_RX_STRAP */
+	PAD_CFG_NF(GPP_R2, DN_20K, DEEP, NF2),
+	/* R3 : HDA_SDIO ==> I2S0_PCH_RX_HP_TX */
+	PAD_CFG_NF(GPP_R3, NONE, DEEP, NF2),
+	/* R6 : I2S1_TXD ==> I2S1_PCH_TX_SPKR_RX_R */
+	PAD_CFG_NF(GPP_R6, NONE, DEEP, NF2),
+	/* R7 : I2S1_SFRM ==> I2S1_SPKR_SFRM_R */
+	PAD_CFG_NF(GPP_R7, NONE, DEEP, NF2),
+
+	/* S0 : SNDW0_CLK ==> SNDW0_HP_CLK_R */
+	PAD_CFG_NF(GPP_S0, NONE, DEEP, NF1),
+	/* S1 : SNDW0_DATA ==> SNDW0_HP_DATA_R */
+	PAD_CFG_NF(GPP_S1, NONE, DEEP, NF1),
+	/* S4 : SNDW2_CLK ==> PCH_DMIC_CAM_SCL_R */
+	PAD_CFG_NF(GPP_S4, NONE, DEEP, NF1),
+	/* S5 : SNDW2_DATA ==> PCH_DMIC_CAM_SDA_R */
+	PAD_CFG_NF(GPP_S5, NONE, DEEP, NF1),
+
+	/* GPD9: SLP_WLAN# ==> SLP_WLAN_L */
+	PAD_CFG_NF(GPD9, NONE, DEEP, NF1),
+};
+
+/* Early pad configuration in bootblock */
+static const struct pad_config early_gpio_table[] = {
+	/* A12 : SATAXPCIE1 ==> M2_SSD_PEDET */
+	PAD_CFG_NF(GPP_A12, NONE, DEEP, NF1),
+	/* A17 : DDSP_HPDC ==> MEM_CH_SEL */
+	PAD_CFG_GPI(GPP_A17, NONE, DEEP),
+
+	/* B11 : PMCALERT# ==> PCH_WP_OD */
+	PAD_CFG_GPI_GPIO_DRIVER(GPP_B11, NONE, DEEP),
+	/* B15 : GSPI0_CS0# ==> PCH_GSPI0_H1_TPM_CS_L */
+	PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
+	/* B16 : GSPI0_CLK ==> PCH_GSPI0_H1_TPM_CLK */
+	PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
+	/* B17 : GSPI0_MISO ==> PCH_GSPIO_H1_TPM_MISO */
+	PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
+	/* B18 : GSPI0_MOSI ==> PCH_GSPI0_H1_TPM_MOSI_STRAP */
+	PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
+
+	/* C0  : SMBCLK ==> EN_PP3300_WLAN */
+	PAD_CFG_GPO(GPP_C0, 1, DEEP),
+	/* C21 : UART2_TXD ==> H1_PCH_INT_ODL */
+	PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
+	/* C22 : UART2_RTS# ==> PCH_FPMCU_BOOT0 */
+	PAD_CFG_GPO(GPP_C22, 0, DEEP),
+
+	/* D16 : ISH_UART0_CTS# ==> EN_PP3300_SD */
+	PAD_CFG_GPO(GPP_D16, 1, DEEP),
+
+	/* E12 : SPI1_MISO_IO1 ==> NC */
+	PAD_NC(GPP_E12, NONE),
+
+	/* F11 : THC1_SPI2_CLK ==> NC */
+	PAD_NC(GPP_F11, NONE),
+
+	/* H11 : SRCCLKREQ5# ==> WLAN_PERST_L */
+	PAD_CFG_GPO(GPP_H11, 1, DEEP),
+};
+
+const struct pad_config *variant_override_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(override_gpio_table);
+	return override_gpio_table;
+}
+
+const struct pad_config *variant_early_gpio_table(size_t *num)
+{
+	*num = ARRAY_SIZE(early_gpio_table);
+	return early_gpio_table;
+}
diff --git a/src/mainboard/google/volteer/variants/eldrid/memory.c b/src/mainboard/google/volteer/variants/eldrid/memory.c
new file mode 100644
index 0000000000..577734dbcf
--- /dev/null
+++ b/src/mainboard/google/volteer/variants/eldrid/memory.c
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <baseboard/gpio.h>
+#include <baseboard/variants.h>
+#include <gpio.h>
+
+/*This mb_ddr4_cfg structure is intentionally left empty so that fields are left nil. */
+static const struct mb_ddr4_cfg eldrid_memcfg = {
+};
+
+static const struct ddr_memory_cfg baseboard_memcfg = {
+	.mem_type = MEMTYPE_DDR4,
+	.ddr4_cfg = &eldrid_memcfg
+};
+
+const struct ddr_memory_cfg *variant_memory_params(void)
+{
+	return &baseboard_memcfg;
+}
+
+int variant_memory_sku(void)
+{
+	gpio_t spd_gpios[] = {
+		GPIO_MEM_CONFIG_3,
+		GPIO_MEM_CONFIG_2,
+		GPIO_MEM_CONFIG_1,
+		GPIO_MEM_CONFIG_0,
+	};
+
+	return gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios));
+}
diff --git a/src/mainboard/google/volteer/variants/eldrid/overridetree.cb b/src/mainboard/google/volteer/variants/eldrid/overridetree.cb
index 89026b8ffb..171e3978dc 100644
--- a/src/mainboard/google/volteer/variants/eldrid/overridetree.cb
+++ b/src/mainboard/google/volteer/variants/eldrid/overridetree.cb
@@ -3,8 +3,136 @@ chip soc/intel/tigerlake
 	register "TcssAuxOri" = "1"
 	register "IomTypeCPortPadCfg[0]" = "0x090E000A"
 	register "IomTypeCPortPadCfg[1]" = "0x090E000D"
-
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| chipset_lockdown  | CHIPSET_LOCKDOWN_COREBOOT |
+	#| GSPI0             | cr50 TPM. Early init is   |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#|                   | before memory is up       |
+	#| GSPI1             | Fingerprint MCU           |
+	#| I2C0              | Audio                     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | WLAN, SAR0                |
+	#| I2C3              | Camera, SAR1              |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
+		.gspi[0] = {
+			.speed_mhz = 1,
+			.early_init = 1,
+		},
+		.i2c[0] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+			.speed_config[0] = {
+				.speed = I2C_SPEED_FAST,
+				.scl_lcnt = 163,
+				.scl_hcnt = 75,
+				.sda_hold = 36,
+			},
+		},
+	}"
 	device domain 0 on
+		device pci 04.0 off end
+		device pci 15.0 on
+			chip drivers/i2c/generic
+				register "hid" = ""10EC5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_F8)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end
+		device pci 15.1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""GDIX0000""
+				register "generic.desc" = ""Goodix Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.reset_delay_ms" = "120"
+				register "generic.reset_off_delay_ms" = "3"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.enable_delay_ms" = "12"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)"
+				register "generic.stop_off_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 14 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN90FC""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_E7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.has_power_resource" = "1"
+				register "generic.disable_gpio_export_in_crs" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 10 on end
+			end
+		end # I2C1				0xA0E9
+		device pci 19.1 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
+				register "wake" = "GPE0_DW2_15"
+				register "probed" = "1"
+				device i2c 15 on end
+			end
+		end # I2C5				0xA0C6
+		device pci 1f.3 on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98357A""
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A10)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device pci 1f.2 hidden
+			# The pmc_mux chip driver is a placeholder for the
+			# PMC.MUX device in the ACPI hierarchy.
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "9"
+						register "usb3_port_number" = "1"
+						# SBU & HSL follow CC
+						device generic 0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						register "usb2_port_number" = "4"
+						register "usb3_port_number" = "2"
+						# SBU is fixed, HSL follows CC
+						register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
+						device generic 1 on end
+					end
+				end
+			end
+		end # PMC
 	end
-
 end