intel/baytrail: Spelling fixes

Change-Id: Ideb58634a029d55746421ad1ea4b80811bca403c
Signed-off-by: Martin Roth <martin.roth@se-eng.com>
Reviewed-on: http://review.coreboot.org/7705
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>

10 files changed, 14 insertions, 14 deletions

diff --git a/src/soc/intel/baytrail/baytrail/iosf.h b/src/soc/intel/baytrail/baytrail/iosf.h
index 9da86f5bb1..220d022207 100644
--- a/src/soc/intel/baytrail/baytrail/iosf.h
+++ b/src/soc/intel/baytrail/baytrail/iosf.h
@@ -63,7 +63,7 @@ uint32_t iosf_bunit_read(int reg);
 void iosf_bunit_write(int reg, uint32_t val);
 uint32_t iosf_dunit_read(int reg);
 void iosf_dunit_write(int reg, uint32_t val);
-/* Some registers are per channel while the gloals live in dunit 0 */
+/* Some registers are per channel while the globals live in dunit 0 */
 uint32_t iosf_dunit_ch0_read(int reg);
 uint32_t iosf_dunit_ch1_read(int reg);
 uint32_t iosf_punit_read(int reg);
@@ -106,7 +106,7 @@ void iosf_ssus_write(int reg, uint32_t val);
 #define IOSF_PORT_SYSMEMC	0x01 /* System Memory Controller */
 #define IOSF_PORT_DUNIT_CH0	0x07 /* DUNIT Channel 0 */
 #define IOSF_PORT_CPU_BUS	0x02 /* CPU Bus Interface Controller */
-#define IOSF_PORT_BUNIT		0x03 /* System Memroy Arbiter/Bunit */
+#define IOSF_PORT_BUNIT		0x03 /* System Memory Arbiter/Bunit */
 #define IOSF_PORT_PMC		0x04 /* Power Management Controller */
 #define IOSF_PORT_GFX		0x06 /* Graphics Adapter */
 #define IOSF_PORT_DUNIT_CH1	0x07 /* DUNIT Channel 1 */
diff --git a/src/soc/intel/baytrail/baytrail/irq.h b/src/soc/intel/baytrail/baytrail/irq.h
index e66fab5d0a..34b3f7d995 100644
--- a/src/soc/intel/baytrail/baytrail/irq.h
+++ b/src/soc/intel/baytrail/baytrail/irq.h
@@ -127,7 +127,7 @@
 # define SCIS_IRQ22				0x06
 # define SCIS_IRQ23				0x07
 
-/* In each mainbaord directory there should exist a header file irqroute.h that
+/* In each mainboard directory there should exist a header file irqroute.h that
  * defines the PCI_DEV_PIRQ_ROUTES and PIRQ_PIC_ROUTES macros which
  * consist of PCI_DEV_PIRQ_ROUTE and PIRQ_PIC entries. */
 
diff --git a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
index b5009e4b2d..355dce0706 100644
--- a/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
+++ b/src/soc/intel/baytrail/baytrail/mrc_wrapper.h
@@ -65,7 +65,7 @@ struct mrc_mainboard_params {
 	int dram_is_slotted; /* mobo has DRAM slots. */
 	/*
 	 * The below ODT settings are only honored when !dram_is_slotted.
-	 * Aditionally, weaker_odt_settings being non-zero causes
+	 * Additionally, weaker_odt_settings being non-zero causes
 	 * cpu_odt_value to not be honored as weaker_odt_settings have a
 	 * special training path.
 	 */
diff --git a/src/soc/intel/baytrail/baytrail/smm.h b/src/soc/intel/baytrail/baytrail/smm.h
index f147f7336e..5ead89f6dc 100644
--- a/src/soc/intel/baytrail/baytrail/smm.h
+++ b/src/soc/intel/baytrail/baytrail/smm.h
@@ -22,7 +22,7 @@
 
 /* There is a bug in the order of Kconfig includes in that arch/x86/Kconfig
  * is included after chipset code. This causes the chipset's Kconfig to be
- * cloberred by the arch/x86/Kconfig if they have the same name. */
+ * clobbered by the arch/x86/Kconfig if they have the same name. */
 static inline int smm_region_size(void)
 {
 	/* Make it 8MiB by default. */
diff --git a/src/soc/intel/baytrail/northcluster.c b/src/soc/intel/baytrail/northcluster.c
index b119e243fe..8ff9712e42 100644
--- a/src/soc/intel/baytrail/northcluster.c
+++ b/src/soc/intel/baytrail/northcluster.c
@@ -50,7 +50,7 @@
  * +--------------------------+ 0
  *
  * Note that there are really only a few regions that need to enumerated w.r.t.
- * coreboot's resrouce model:
+ * coreboot's resource model:
  *
  * +--------------------------+ BMBOUND_HI
  * |     Cacheable/Usable     |
diff --git a/src/soc/intel/baytrail/pcie.c b/src/soc/intel/baytrail/pcie.c
index 4498f43a22..71b90ded47 100644
--- a/src/soc/intel/baytrail/pcie.c
+++ b/src/soc/intel/baytrail/pcie.c
@@ -80,7 +80,7 @@ static const struct reg_script init_static_after_exit_latency[] = {
 	REG_PCI_RMW16(DSTS2, ~CTD, 0x6),
 	/* Enable AER */
 	REG_PCI_OR16(DCTL_DSTS, URE | FEE | NFE | CEE),
-	/* Read and write back capabaility registers. */
+	/* Read and write back capability registers. */
 	REG_PCI_OR32(0x34, 0),
 	REG_PCI_OR32(0x80, 0),
 	/* Retrain the link. */
diff --git a/src/soc/intel/baytrail/smihandler.c b/src/soc/intel/baytrail/smihandler.c
index 62de9fad4a..a2718e2ddf 100644
--- a/src/soc/intel/baytrail/smihandler.c
+++ b/src/soc/intel/baytrail/smihandler.c
@@ -392,7 +392,7 @@ void southbridge_smi_handler(void)
 			southbridge_smi[i]();
 		} else {
 			printk(BIOS_DEBUG,
-			       "SMI_STS[%d] occured, but no "
+			       "SMI_STS[%d] occurred, but no "
 			       "handler available.\n", i);
 		}
 	}
diff --git a/src/soc/intel/baytrail/southcluster.c b/src/soc/intel/baytrail/southcluster.c
index 500a13d1e2..5274b034f2 100644
--- a/src/soc/intel/baytrail/southcluster.c
+++ b/src/soc/intel/baytrail/southcluster.c
@@ -158,7 +158,7 @@ static void com1_configure_resume(device_t dev)
 {
 	const uint16_t port = 0x3f8;
 
-	/* Is the UART I/O port eanbled? */
+	/* Is the UART I/O port enabled? */
 	if (!(pci_read_config32(dev, UART_CONT) & 1))
 		return;
 
@@ -223,7 +223,7 @@ static void sc_init(device_t dev)
  * Common code for the south cluster devices.
  */
 
-/* Set bit in function disble register to hide this device. */
+/* Set bit in function disable register to hide this device. */
 static void sc_disable_devfn(device_t dev)
 {
 	const unsigned long func_dis = PMC_BASE_ADDRESS + FUNC_DIS;
diff --git a/src/soc/intel/baytrail/spi.c b/src/soc/intel/baytrail/spi.c
index 8677b61057..10dbe44d01 100644
--- a/src/soc/intel/baytrail/spi.c
+++ b/src/soc/intel/baytrail/spi.c
@@ -565,7 +565,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout,
 
 		/*
 		 * This is a 'no data' command (like Write Enable), its
-		 * bitesout size was 1, decremented to zero while executing
+		 * bytesout size was 1, decremented to zero while executing
 		 * spi_setup_opcode() above. Tell the chip to send the
 		 * command.
 		 */
@@ -585,7 +585,7 @@ int spi_xfer(struct spi_slave *slave, const void *dout,
 	}
 
 	/*
-	 * Check if this is a write command atempting to transfer more bytes
+	 * Check if this is a write command attempting to transfer more bytes
 	 * than the controller can handle. Iterations for writes are not
 	 * supported here because each SPI write command needs to be preceded
 	 * and followed by other SPI commands, and this sequence is controlled
diff --git a/src/soc/intel/baytrail/tsc_freq.c b/src/soc/intel/baytrail/tsc_freq.c
index 90f154c896..da7e96590c 100644
--- a/src/soc/intel/baytrail/tsc_freq.c
+++ b/src/soc/intel/baytrail/tsc_freq.c
@@ -68,11 +68,11 @@ void set_max_freq(void)
 	msr.lo |= (1 << 16);
 	wrmsr(MSR_IA32_MISC_ENABLES, msr);
 
-	/* Set guranteed ratio [21:16] from IACORE_RATIOS to bits [15:8] of
+	/* Set guaranteed ratio [21:16] from IACORE_RATIOS to bits [15:8] of
 	* the PERF_CTL. */
 	msr = rdmsr(MSR_IACORE_RATIOS);
 	perf_ctl.lo = (msr.lo & 0x3f0000) >> 8;
-	/* Set guranteed vid [21:16] from IACORE_VIDS to bits [7:0] of
+	/* Set guaranteed vid [21:16] from IACORE_VIDS to bits [7:0] of
 	* the PERF_CTL. */
 	msr = rdmsr(MSR_IACORE_VIDS);
 	perf_ctl.lo |= (msr.lo & 0x7f0000) >> 16;