summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLijian Zhao <lijian.zhao@intel.com>2018-08-23 06:54:59 -0700
committerMartin Roth <martinroth@google.com>2018-08-28 15:12:44 +0000
commitf3122426b851b9ca009e501a8d8c60d062f84c98 (patch)
treef93fb806c11b0e3602a022c3dd8f42891e5074fa
parent990d825196227190d3625c3b44a082816748bc3b (diff)
downloadcoreboot-f3122426b851b9ca009e501a8d8c60d062f84c98.tar.xz
fsp/fsp2_0/coffeelake: Update CFL FSP headers
Coffeelake FSP headers had been updated to version 7.0.3D.60. Original file location from https://github.com/IntelFsp/FSP/tree/master/ CoffeeLakeFspBinPkg/Include . BUG=N/A TEST=Build and flash, able to boot up into OS on whiskeylake rvp platform. Change-Id: I656da83e9042642576b785643e423ba47da8dd73 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/28286 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h117
-rw-r--r--src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h6475
2 files changed, 3351 insertions, 3241 deletions
diff --git a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h
index bfe581b581..5a1580cb3c 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspmUpd.h
@@ -37,19 +37,19 @@ are permitted provided that the following conditions are met:
#pragma pack(1)
-
-#include <MemInfoHob.h>
-
-///
-/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
-///
-typedef struct {
- UINT8 Revision; ///< Chipset Init Info Revision
- UINT8 Rsvd[3]; ///< Reserved
- UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
- UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
-} CHIPSET_INIT_INFO;
-
+
+#include <MemInfoHob.h>
+
+///
+/// The ChipsetInit Info structure provides the information of ME ChipsetInit CRC and BIOS ChipsetInit CRC.
+///
+typedef struct {
+ UINT8 Revision; ///< Chipset Init Info Revision
+ UINT8 Rsvd[3]; ///< Reserved
+ UINT16 MeChipInitCrc; ///< 16 bit CRC value of MeChipInit Table
+ UINT16 BiosChipInitCrc; ///< 16 bit CRC value of PchChipInit Table
+} CHIPSET_INIT_INFO;
+
/** Fsp M Configuration
**/
@@ -331,9 +331,16 @@ typedef struct {
**/
UINT8 ScramblerSupport;
-/** Offset 0x00C8
+/** Offset 0x00C8 - Skip Multi-Processor Initialization
+ When this is skipped, boot loader must initialize processors before SilicionInit
+ API. </b>0: Initialize; <b>1: Skip
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x00C9
**/
- UINT8 UnusedUpdSpace1[16];
+ UINT8 UnusedUpdSpace1[15];
/** Offset 0x00D8 - SPD Profile Selected
Select DIMM timing profile. Options are 0=Default profile, 1=Custom profile, 2=XMP
@@ -479,7 +486,9 @@ typedef struct {
UINT8 CpuTraceHubMemReg1Size;
/** Offset 0x00F6 - Enable or Disable Peci C10 Reset command
- Enable or Disable Peci C10 Reset command; <b>0: Disable;</b> 1: Enable.
+ Enable or Disable Peci C10 Reset command. If Enabled, BIOS will send the CPU message
+ to disable peci reset on C10 exit. The default value is <b>0: Disable</b> for CNL,
+ and <b>1: Enable</b> for all other CPU's
$EN_DIS
**/
UINT8 PeciC10Reset;
@@ -949,7 +958,7 @@ typedef struct {
/** Offset 0x0205 - Maximum Core Turbo Ratio Override
Maximum core turbo ratio override allows to increase CPU core frequency beyond the
- fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255
**/
UINT8 CoreMaxOcRatio;
@@ -959,13 +968,15 @@ typedef struct {
**/
UINT8 CoreVoltageMode;
-/** Offset 0x0207
+/** Offset 0x0207 - Program Cache Attributes
+ Program Cache Attributes; <b>0: Program</b>; 1: Disable Program.
+ $EN_DIS
**/
- UINT8 UnusedUpdSpace6;
+ UINT8 DisableMtrrProgram;
/** Offset 0x0208 - Maximum clr turbo ratio override
Maximum clr turbo ratio override allows to increase CPU clr frequency beyond the
- fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-83
+ fused max turbo ratio limit. <b>0: Hardware defaults.</b> Range: 0-255
**/
UINT8 RingMaxOcRatio;
@@ -1116,7 +1127,7 @@ typedef struct {
/** Offset 0x0227
**/
- UINT8 UnusedUpdSpace7;
+ UINT8 UnusedUpdSpace6;
/** Offset 0x0228 - PrmrrSize
0=Invalid, 32MB=0x2000000, 64MB=0x4000000, 128MB=0x8000000, 256MB=0x10000000
@@ -1861,12 +1872,12 @@ typedef struct {
UINT8 RhActProbability;
/** Offset 0x04C1 - RAPL PL 2 WindowX
- Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+ Power PL 2 time window X value, (1/1024)*(1+(x/4))*(2^y) (1=Def)
**/
UINT8 RaplLim2WindX;
/** Offset 0x04C2 - RAPL PL 2 WindowY
- Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (0=Def)
+ Power PL 2 time window Y value, (1/1024)*(1+(x/4))*(2^y) (1=Def)
**/
UINT8 RaplLim2WindY;
@@ -1881,52 +1892,52 @@ typedef struct {
UINT8 RaplLim1WindY;
/** Offset 0x04C5 - RAPL PL 2 Power
- range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+ range[0;2^14-1]= [2047.875;0]in W, (222= Def)
**/
UINT16 RaplLim2Pwr;
/** Offset 0x04C7 - RAPL PL 1 Power
- range[0;2^14-1]= [2047.875;0]in W, (224= Def)
+ range[0;2^14-1]= [2047.875;0]in W, (0= Def)
**/
UINT16 RaplLim1Pwr;
/** Offset 0x04C9 - Warm Threshold Ch0 Dimm0
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 WarmThresholdCh0Dimm0;
/** Offset 0x04CA - Warm Threshold Ch0 Dimm1
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 WarmThresholdCh0Dimm1;
/** Offset 0x04CB - Warm Threshold Ch1 Dimm0
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 WarmThresholdCh1Dimm0;
/** Offset 0x04CC - Warm Threshold Ch1 Dimm1
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 WarmThresholdCh1Dimm1;
/** Offset 0x04CD - Hot Threshold Ch0 Dimm0
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 HotThresholdCh0Dimm0;
/** Offset 0x04CE - Hot Threshold Ch0 Dimm1
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 HotThresholdCh0Dimm1;
/** Offset 0x04CF - Hot Threshold Ch1 Dimm0
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 HotThresholdCh1Dimm0;
/** Offset 0x04D0 - Hot Threshold Ch1 Dimm1
- range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Fefault is 255
+ range[255;0]=[31.875;0] in W for OLTM, [127.5;0] in C for CLTM. Default is 255
**/
UINT8 HotThresholdCh1Dimm1;
@@ -2072,7 +2083,7 @@ typedef struct {
/** Offset 0x04ED - Throttler CKEMin Timer
Timer value for CKEMin, range[255;0]. Req'd min of SC_ROUND_T + BYTE_LENGTH (4).
- Dfault is 0x30
+ Default is 0x30
**/
UINT8 ThrtCkeMinTmr;
@@ -2286,9 +2297,34 @@ typedef struct {
**/
UINT8 DualDimmPerChannelBoardType;
-/** Offset 0x0510
+/** Offset 0x0510 - DDR4 Mixed U-DIMM 2DPC Limitation
+ Enable/Disable 2667 Frequency Limitation for DDR4 U-DIMM Mixed Dimm 2DPC population.
+ Disable(Default)=0, Enable=1
+ $EN_DIS
**/
- UINT8 ReservedFspmUpd[15];
+ UINT8 Ddr4MixedUDimm2DpcLimit;
+
+/** Offset 0x0511 - CFL Reserved
+ Reserved FspmConfig CFL
+ $EN_DIS
+**/
+ UINT8 ReservedFspmUpdCfl[2];
+
+/** Offset 0x0513 - Memory Test on Warm Boot
+ Run Base Memory Test on Warm Boot
+ 0:Disable, 1:Enable
+**/
+ UINT8 MemTestOnWarmBoot;
+
+/** Offset 0x0514 - Throttler CKEMin Timer - LPDDR
+ Timer value for CKEMin (For LPDDR Only), range[255;0]. Req'd min of SC_ROUND_T +
+ BYTE_LENGTH (4). Default is 0x40
+**/
+ UINT8 ThrtCkeMinTmrLpddr;
+
+/** Offset 0x0515
+**/
+ UINT8 ReservedFspmUpd[10];
} FSP_M_CONFIG;
/** Fsp M Test Configuration
@@ -2513,7 +2549,7 @@ typedef struct {
/** Offset 0x0579
**/
- UINT8 UnusedUpdSpace9;
+ UINT8 UnusedUpdSpace8;
/** Offset 0x057A - Jitter Dwell Time for PCIe Gen3 Software Equalization
Range: 0-65535, default is 1000. @warning Do not change from the default
@@ -2596,14 +2632,13 @@ typedef struct {
UINT8 SmbusSpdWriteDisable;
/** Offset 0x059B - ChipsetInit HECI message
- Enable/Disable. 0: Disable, 1: enable, Enable or disable ChipsetInit HECI message.
- If disabled, it prevents from sending ChipsetInit HECI message.
+ DEPRECATED
$EN_DIS
**/
UINT8 ChipsetInitMessage;
/** Offset 0x059C - Bypass ChipsetInit sync reset.
- 0: disable, 1: enable, Set Enable to bypass the reset after ChipsetInit HECI message.
+ DEPRECATED
$EN_DIS
**/
UINT8 BypassPhySyncReset;
@@ -2788,7 +2823,7 @@ typedef struct {
/** Offset 0x051F
**/
- UINT8 UnusedUpdSpace8;
+ UINT8 UnusedUpdSpace7;
/** Offset 0x0520
**/
diff --git a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h
index ac4fd58d6a..653e669b4a 100644
--- a/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h
+++ b/src/vendorcode/intel/fsp/fsp2_0/coffeelake/FspsUpd.h
@@ -1,42 +1,42 @@
-/** @file
-
-Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this
- list of conditions and the following disclaimer.
-* Redistributions in binary form must reproduce the above copyright notice, this
- list of conditions and the following disclaimer in the documentation and/or
- other materials provided with the distribution.
-* Neither the name of Intel Corporation nor the names of its contributors may
- be used to endorse or promote products derived from this software without
- specific prior written permission.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
- LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
- CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
- SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
- INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
- CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
- THE POSSIBILITY OF SUCH DAMAGE.
-
- This file is automatically generated. Please do NOT modify !!!
-
-**/
-
-#ifndef __FSPSUPD_H__
-#define __FSPSUPD_H__
-
-#include <FspUpd.h>
-
-#pragma pack(1)
-
+/** @file
+
+Copyright (c) 2018, Intel Corporation. All rights reserved.<BR>
+
+Redistribution and use in source and binary forms, with or without modification,
+are permitted provided that the following conditions are met:
+
+* Redistributions of source code must retain the above copyright notice, this
+ list of conditions and the following disclaimer.
+* Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or
+ other materials provided with the distribution.
+* Neither the name of Intel Corporation nor the names of its contributors may
+ be used to endorse or promote products derived from this software without
+ specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
+ THE POSSIBILITY OF SUCH DAMAGE.
+
+ This file is automatically generated. Please do NOT modify !!!
+
+**/
+
+#ifndef __FSPSUPD_H__
+#define __FSPSUPD_H__
+
+#include <FspUpd.h>
+
+#pragma pack(1)
+
///
/// Azalia Header structure
@@ -80,3164 +80,3239 @@ typedef struct {
#define SI_PCH_MAX_DEVICE_INTERRUPT_CONFIG 64 ///< Number of all PCH devices
-
-/** Fsp S Configuration
-**/
-typedef struct {
-
-/** Offset 0x0020 - Logo Pointer
- Points to PEI Display Logo Image
-**/
- UINT32 LogoPtr;
-
-/** Offset 0x0024 - Logo Size
- Size of PEI Display Logo Image
-**/
- UINT32 LogoSize;
-
-/** Offset 0x0028 - Graphics Configuration Ptr
- Points to VBT
-**/
- UINT32 GraphicsConfigPtr;
-
-/** Offset 0x002C - Enable Device 4
- Enable/disable Device 4
- $EN_DIS
-**/
- UINT8 Device4Enable;
-
-/** Offset 0x002D - Enable HD Audio DSP
- Enable/disable HD Audio DSP feature.
- $EN_DIS
-**/
- UINT8 PchHdaDspEnable;
-
-/** Offset 0x002E
-**/
- UINT8 UnusedUpdSpace0[3];
-
-/** Offset 0x0031 - Enable eMMC Controller
- Enable/disable eMMC Controller.
- $EN_DIS
-**/
- UINT8 ScsEmmcEnabled;
-
-/** Offset 0x0032 - Enable eMMC HS400 Mode
- Enable eMMC HS400 Mode.
- $EN_DIS
-**/
- UINT8 ScsEmmcHs400Enabled;
-
-/** Offset 0x0033 - Enable SdCard Controller
- Enable/disable SD Card Controller.
- $EN_DIS
-**/
- UINT8 ScsSdCardEnabled;
-
-/** Offset 0x0034 - Show SPI controller
- Enable/disable to show SPI controller.
- $EN_DIS
-**/
- UINT8 ShowSpiController;
-
-/** Offset 0x0035
-**/
- UINT8 UnusedUpdSpace1[3];
-
-/** Offset 0x0038 - MicrocodeRegionBase
- Memory Base of Microcode Updates
-**/
- UINT32 MicrocodeRegionBase;
-
-/** Offset 0x003C - MicrocodeRegionSize
- Size of Microcode Updates
-**/
- UINT32 MicrocodeRegionSize;
-
-/** Offset 0x0040 - Turbo Mode
- Enable/Disable Turbo mode. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 TurboMode;
-
-/** Offset 0x0041 - Enable SATA SALP Support
- Enable/disable SATA Aggressive Link Power Management.
- $EN_DIS
-**/
- UINT8 SataSalpSupport;
-
-/** Offset 0x0042 - Enable SATA ports
- Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
- and so on.
-**/
- UINT8 SataPortsEnable[8];
-
-/** Offset 0x004A - Enable SATA DEVSLP Feature
- Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
- port, byte0 for port0, byte1 for port1, and so on.
-**/
- UINT8 SataPortsDevSlp[8];
-
-/** Offset 0x0052 - Enable USB2 ports
- Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
- port1, and so on.
-**/
- UINT8 PortUsb20Enable[16];
-
-/** Offset 0x0062 - Enable USB3 ports
- Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
- port1, and so on.
-**/
- UINT8 PortUsb30Enable[10];
-
-/** Offset 0x006C - Enable xDCI controller
- Enable/disable to xDCI controller.
- $EN_DIS
-**/
- UINT8 XdciEnable;
-
-/** Offset 0x006D
-**/
- UINT8 UnusedUpdSpace2[2];
-
-/** Offset 0x006F - Enable SerialIo Device Mode
- 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable
- SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device
- mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1,
- and so on.
-**/
- UINT8 SerialIoDevMode[12];
-
-/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
- The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
-**/
- UINT32 DevIntConfigPtr;
-
-/** Offset 0x007F - Number of DevIntConfig Entry
- Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
- must not be NULL.
-**/
- UINT8 NumOfDevIntConfig;
-
-/** Offset 0x0080 - PIRQx to IRQx Map Config
- PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
- PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
- 8259 PCI mode.
-**/
- UINT8 PxRcConfig[8];
-
-/** Offset 0x0088 - Select GPIO IRQ Route
- GPIO IRQ Select. The valid value is 14 or 15.
-**/
- UINT8 GpioIrqRoute;
-
-/** Offset 0x0089 - Select SciIrqSelect
- SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
-**/
- UINT8 SciIrqSelect;
-
-/** Offset 0x008A - Select TcoIrqSelect
- TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
-**/
- UINT8 TcoIrqSelect;
-
-/** Offset 0x008B - Enable/Disable Tco IRQ
- Enable/disable TCO IRQ
- $EN_DIS
-**/
- UINT8 TcoIrqEnable;
-
-/** Offset 0x008C - PCH HDA Verb Table Entry Number
- Number of Entries in Verb Table.
-**/
- UINT8 PchHdaVerbTableEntryNum;
-
-/** Offset 0x008D - PCH HDA Verb Table Pointer
- Pointer to Array of pointers to Verb Table.
-**/
- UINT32 PchHdaVerbTablePtr;
-
-/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability
- Capability to detect wake initiated by a codec in Sx
-**/
- UINT8 PchHdaCodecSxWakeCapability;
-
-/** Offset 0x0092 - Enable SATA
- Enable/disable SATA controller.
- $EN_DIS
-**/
- UINT8 SataEnable;
-
-/** Offset 0x0093 - SATA Mode
- Select SATA controller working mode.
- 0:AHCI, 1:RAID
-**/
- UINT8 SataMode;
-
-/** Offset 0x0094 - USB Per Port HS Preemphasis Bias
- USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
- 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
-**/
- UINT8 Usb2AfePetxiset[16];
-
-/** Offset 0x00A4 - USB Per Port HS Transmitter Bias
- USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
- 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
-**/
- UINT8 Usb2AfeTxiset[16];
-
-/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis
- USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
- 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
-**/
- UINT8 Usb2AfePredeemp[16];
-
-/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis
- USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
- One byte for each port.
-**/
- UINT8 Usb2AfePehalfbit[16];
-
-/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
- Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
- in arrary can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxDeEmphEnable[10];
-
-/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
- USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
- <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
-**/
- UINT8 Usb3HsioTxDeEmph[10];
-
-/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
- Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
- in arrary can be between 0-1. One byte for each port.
-**/
- UINT8 Usb3HsioTxDownscaleAmpEnable[10];
-
-/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment
- USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
- = 00h</b>. One byte for each port.
-**/
- UINT8 Usb3HsioTxDownscaleAmp[10];
-
-/** Offset 0x00FC - Enable LAN
- Enable/disable LAN controller.
- $EN_DIS
-**/
- UINT8 PchLanEnable;
-
-/** Offset 0x00FD - Enable HD Audio Link
- Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkHda;
-
-/** Offset 0x00FE - Enable HD Audio DMIC0 Link
- Enable/disable HD Audio DMIC0 link. Muxed with SNDW4.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkDmic0;
-
-/** Offset 0x00FF - Enable HD Audio DMIC1 Link
- Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkDmic1;
-
-/** Offset 0x0100 - Enable HD Audio SSP0 Link
- Enable/disable HD Audio SSP0/I2S link. Muxed with HDA.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSsp0;
-
-/** Offset 0x0101 - Enable HD Audio SSP1 Link
- Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSsp1;
-
-/** Offset 0x0102 - Enable HD Audio SSP2 Link
- Enable/disable HD Audio SSP2/I2S link.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSsp2;
-
-/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link
- Enable/disable HD Audio SNDW1 link. Muxed with HDA.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSndw1;
-
-/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link
- Enable/disable HD Audio SNDW2 link. Muxed with SSP1.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSndw2;
-
-/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link
- Enable/disable HD Audio SNDW3 link. Muxed with DMIC1.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSndw3;
-
-/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link
- Enable/disable HD Audio SNDW4 link. Muxed with DMIC0.
- $EN_DIS
-**/
- UINT8 PchHdaAudioLinkSndw4;
-
-/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting
- 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance.
- $EN_DIS
-**/
- UINT8 PchHdaSndwBufferRcomp;
-
-/** Offset 0x0108 - PTM for PCIE RP Mask
- Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
- One bit for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT32 PcieRpPtmMask;
-
-/** Offset 0x010C - DPC for PCIE RP Mask
- Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
- One bit for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT32 PcieRpDpcMask;
-
-/** Offset 0x0110 - DPC Extensions PCIE RP Mask
- Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
- for each port, bit0 for port1, bit1 for port2, and so on.
-**/
- UINT32 PcieRpDpcExtensionsMask;
-
-/** Offset 0x0114 - USB PDO Programming
- Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
- during later phase. 1: enable, 0: disable
- $EN_DIS
-**/
- UINT8 UsbPdoProgramming;
-
-/** Offset 0x0115 - Power button debounce configuration
- Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
- be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
-**/
- UINT32 PmcPowerButtonDebounce;
-
-/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled
- PCH eSPI Master and Slave BME enabled
- $EN_DIS
-**/
- UINT8 PchEspiBmeMasterSlaveEnabled;
-
-/** Offset 0x011A - PCH SATA use RST Legacy OROM
- Use PCH SATA RST Legacy OROM when CSM is Enabled
- $EN_DIS
-**/
- UINT8 SataRstLegacyOrom;
-
-/** Offset 0x011B - Trace Hub Memory Base
- If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
- trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
- memory is configured properly.
-**/
- UINT32 TraceHubMemBase;
-
-/** Offset 0x011F - PMC Debug Message Enable
- When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
- will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
- $EN_DIS
-**/
- UINT8 PmcDbgMsgEn;
-
-/** Offset 0x0120 - PchPostMemRsvd
- Reserved for PCH Post-Mem
- $EN_DIS
-**/
- UINT8 PchPostMemRsvd[37];
-
-/** Offset 0x0145 - Enable Ufs Controller
- Enable/disable Ufs 2.0 Controller.
- $EN_DIS
-**/
- UINT8 ScsUfsEnabled;
-
-/** Offset 0x0146 - CNVi Configuration
- This option allows for automatic detection of Connectivity Solution. [Auto Detection]
- assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
- 0:Disable, 1:Auto
-**/
- UINT8 PchCnviMode;
-
-/** Offset 0x0147 - SdCard power enable polarity
- Choose SD_PWREN# polarity
- 0: Active low, 1: Active high
-**/
- UINT8 SdCardPowerEnableActiveHigh;
-
-/** Offset 0x0148 - PCH USB2 PHY Power Gating enable
- 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
- Sus Well PG
- $EN_DIS
-**/
- UINT8 PchUsb2PhySusPgEnable;
-
-/** Offset 0x0149 - PCH USB OverCurrent mapping enable
- 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
- mapping allow for NOA usage of OC pins
- $EN_DIS
-**/
- UINT8 PchUsbOverCurrentEnable;
-
-/** Offset 0x014A
-**/
- UINT8 UnusedUpdSpace3;
-
-/** Offset 0x014B - CNVi MfUart1 Type
- This option configures Uart type which connects to MfUart1
- 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads
-**/
- UINT8 PchCnviMfUart1Type;
-
-/** Offset 0x014C - Espi Lgmr Memory Range decode
- This option enables or disables espi lgmr
- $EN_DIS
-**/
- UINT8 PchEspiLgmrEnable;
-
-/** Offset 0x014D - HECI3 state
- The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
- 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 Heci3Enabled;
-
-/** Offset 0x014E
-**/
- UINT8 UnusedUpdSpace4;
-
-/** Offset 0x014F - PCHHOT# pin
- Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchHotEnable;
-
-/** Offset 0x0150 - SATA LED
- SATA LED indicating SATA controller activity. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 SataLedEnable;
-
-/** Offset 0x0151 - VRAlert# Pin
- When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
- to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchPmVrAlert;
-
-/** Offset 0x0152 - SLP_S0 VM Dynamic Control
- SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchPmSlpS0VmRuntimeControl;
-
-/** Offset 0x0153 - SLP_S0 VM 0.70V Support
- SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchPmSlpS0Vm070VSupport;
-
-/** Offset 0x0154 - SLP_S0 VM 0.75V Support
- SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PchPmSlpS0Vm075VSupport;
-
-/** Offset 0x0155 - AMT Switch
- Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
- $EN_DIS
-**/
- UINT8 AmtEnabled;
-
-/** Offset 0x0156 - WatchDog Timer Switch
- Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer.
- $EN_DIS
-**/
- UINT8 WatchDog;
-
-/** Offset 0x0157 - ASF Switch
- Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality.
- $EN_DIS
-**/
- UINT8 AsfEnabled;
-
-/** Offset 0x0158 - Manageability Mode set by Mebx
- Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
- $EN_DIS
-**/
- UINT8 ManageabilityMode;
-
-/** Offset 0x0159 - PET Progress
- Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
- PET Events.
- $EN_DIS
-**/
- UINT8 FwProgress;
-
-/** Offset 0x015A - SOL Switch
- Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx
- $EN_DIS
-**/
- UINT8 AmtSolEnabled;
-
-/** Offset 0x015B - OS Timer
- 16 bits Value, Set OS watchdog timer.
- $EN_DIS
-**/
- UINT16 WatchDogTimerOs;
-
-/** Offset 0x015D - BIOS Timer
- 16 bits Value, Set BIOS watchdog timer.
- $EN_DIS
-**/
- UINT16 WatchDogTimerBios;
-
-/** Offset 0x015F - Remote Assistance Trigger Availablilty
- Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx
- $EN_DIS
-**/
- UINT8 RemoteAssistance;
-
-/** Offset 0x0160 - KVM Switch
- Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
- $EN_DIS
-**/
- UINT8 AmtKvmEnabled;
-
-/** Offset 0x0161 - KVM Switch
- Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
- $EN_DIS
-**/
- UINT8 ForcMebxSyncUp;
-
-/** Offset 0x0162
-**/
- UINT8 UnusedUpdSpace5[1];
-
-/** Offset 0x0163 - PCH PCIe root port connection type
- 0: built-in device, 1:slot
-**/
- UINT8 PcieRpSlotImplemented[24];
-
-/** Offset 0x017B - Usage type for ClkSrc
- 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
- (free running), 0xFF: not used
-**/
- UINT8 PcieClkSrcUsage[16];
-
-/** Offset 0x018B - ClkReq-to-ClkSrc mapping
- Number of ClkReq signal assigned to ClkSrc
-**/
- UINT8 PcieClkSrcClkReq[16];
-
-/** Offset 0x019B - PCIE RP Access Control Services Extended Capability
- Enable/Disable PCIE RP Access Control Services Extended Capability
-**/
- UINT8 PcieRpAcsEnabled[24];
-
-/** Offset 0x01B3 - PCIE RP Clock Power Management
- Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
- can still be controlled by L1 PM substates mechanism
-**/
- UINT8 PcieRpEnableCpm[24];
-
-/** Offset 0x01CB - PCIE RP Detect Timeout Ms
- The number of milliseconds within 0~65535 in reference code will wait for link to
- exit Detect state for enabled ports before assuming there is no device and potentially
- disabling the port.
-**/
- UINT16 PcieRpDetectTimeoutMs[24];
-
-/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating
- Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
- PCH-H. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 PmcModPhySusPgEnable;
-
-/** Offset 0x01FC - SlpS0WithGbeSupport
- Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable
- $EN_DIS
-**/
- UINT8 SlpS0WithGbeSupport;
-
-/** Offset 0x01FD
-**/
- UINT8 UnusedUpdSpace6[3];
-
-/** Offset 0x0200 - Enable/Disable SA CRID
- Enable: SA CRID, Disable (Default): SA CRID
- $EN_DIS
-**/
- UINT8 CridEnable;
-
-/** Offset 0x0201 - DMI ASPM
- 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1
- 0:Disable, 1:L0s, 2:L1, 3:L0sL1
-**/
- UINT8 DmiAspm;
-
-/** Offset 0x0202 - PCIe DeEmphasis control per root port
- 0: -6dB, 1(Default): -3.5dB
- 0:-6dB, 1:-3.5dB
-**/
- UINT8 PegDeEmphasis[4];
-
-/** Offset 0x0206 - PCIe Slot Power Limit value per root port
- Slot power limit value per root port
-**/
- UINT8 PegSlotPowerLimitValue[4];
-
-/** Offset 0x020A - PCIe Slot Power Limit scale per root port
- Slot power limit scale per root port
- 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x
-**/
- UINT8 PegSlotPowerLimitScale[4];
-
-/** Offset 0x020E - PCIe Physical Slot Number per root port
- Physical Slot Number per root port
-**/
- UINT16 PegPhysicalSlotNumber[4];
-
-/** Offset 0x0216 - Enable/Disable PavpEnable
- Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
- $EN_DIS
-**/
- UINT8 PavpEnable;
-
-/** Offset 0x0217 - CdClock Frequency selection
- 0=168 Mhz, 1=336 Mhz, 2=528 Mhz, 3(Default)=675 Mhz
- 0: 168 Mhz, 1: 336 Mhz, 2: 528 Mhz, 3: 675 Mhz
-**/
- UINT8 CdClock;
-
-/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit
- Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
- $EN_DIS
-**/
- UINT8 PeiGraphicsPeimInit;
-
-/** Offset 0x0219
-**/
- UINT8 UnusedUpdSpace7;
-
-/** Offset 0x021A - Enable or disable GNA device
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 GnaEnable;
-
-/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table
- 0=Disable/Clear, 1=Enable/Set
- $EN_DIS
-**/
- UINT8 X2ApicOptOut;
-
-/** Offset 0x021C - Base addresses for VT-d function MMIO access
- Base addresses for VT-d MMIO access per VT-d engine
-**/
- UINT32 VtdBaseAddress[3];
-
-/** Offset 0x0228 - Enable or disable eDP device
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortEdp;
-
-/** Offset 0x0229 - Enable or disable HPD of DDI port B
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortBHpd;
-
-/** Offset 0x022A - Enable or disable HPD of DDI port C
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortCHpd;
-
-/** Offset 0x022B - Enable or disable HPD of DDI port D
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortDHpd;
-
-/** Offset 0x022C - Enable or disable HPD of DDI port F
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortFHpd;
-
-/** Offset 0x022D - Enable or disable DDC of DDI port B
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortBDdc;
-
-/** Offset 0x022E - Enable or disable DDC of DDI port C
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortCDdc;
-
-/** Offset 0x022F - Enable or disable DDC of DDI port D
- 0=Disable, 1(Default)=Enable
- $EN_DIS
-**/
- UINT8 DdiPortDDdc;
-
-/** Offset 0x0230 - Enable or disable DDC of DDI port F
- 0(Default)=Disable, 1=Enable
- $EN_DIS
-**/
- UINT8 DdiPortFDdc;
-
-/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit
- Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
- CD clock in S3 resume due to GOP absent
- $EN_DIS
-**/
- UINT8 SkipS3CdClockInit;
-
-/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms
- Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate
- T12 Delay to max 500ms
- 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay
-**/
- UINT16 DeltaT12PowerCycleDelay;
-
-/** Offset 0x0234 - Blt Buffer Address
- Address of Blt buffer
-**/
- UINT32 BltBufferAddress;
-
-/** Offset 0x0238 - Blt Buffer Size
- Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
- EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
-**/
- UINT32 BltBufferSize;
-
-/** Offset 0x023C - SaPostMemProductionRsvd
- Reserved for SA Post-Mem Production
- $EN_DIS
-**/
- UINT8 SaPostMemProductionRsvd[35];
-
-/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable
- PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for
- Alpine ridge
-**/
- UINT8 PcieRootPortGen2PllL1CgDisable[24];
-
-/** Offset 0x0277 - Advanced Encryption Standard (AES) feature
- Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
- $EN_DIS
-**/
- UINT8 AesEnable;
-
-/** Offset 0x0278 - Power State 3 enable/disable
- PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
- For all VR Indexes
-**/
- UINT8 Psi3Enable[5];
-
-/** Offset 0x027D - Power State 4 enable/disable
- PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
- all VR Indexes
-**/
- UINT8 Psi4Enable[5];
-
-/** Offset 0x0282 - Imon slope correction
- PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
- Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
-**/
- UINT8 ImonSlope[5];
-
-/** Offset 0x0287 - Imon offset correction
- PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
- Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
-**/
- UINT8 ImonOffset[5];
-
-/** Offset 0x028C - Enable/Disable BIOS configuration of VR
- Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
-**/
- UINT8 VrConfigEnable[5];
-
-/** Offset 0x0291 - Thermal Design Current enable/disable
- PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
- Enable.For all VR Indexes
-**/
- UINT8 TdcEnable[5];
-
-/** Offset 0x0296 - HECI3 state
- PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
- Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms
- , 8 - 8ms , 10 - 10ms.For all VR Indexe
-**/
- UINT8 TdcTimeWindow[5];
-
-/** Offset 0x029B - Thermal Design Current Lock
- PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
- all VR Indexes
-**/
- UINT8 TdcLock[5];
-
-/** Offset 0x02A0 - Platform Psys slope correction
- PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
- 1/100 increment values. Range is 0-200. 125 = 1.25
-**/
- UINT8 PsysSlope;
-
-/** Offset 0x02A1 - Platform Psys offset correction
- PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4,
- Range 0-255. Value of 100 = 100/4 = 25 offset
-**/
- UINT8 PsysOffset;
-
-/** Offset 0x02A2 - Acoustic Noise Mitigation feature
- Enable or Disable Acoustic Noise Mitigation feature. <b>0: Disabled</b>; 1: Enabled
- $EN_DIS
-**/
- UINT8 AcousticNoiseMitigation;
-
-/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain
- Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
- feature enabled. <b>0: False</b>; 1: True
- $EN_DIS
-**/
- UINT8 FastPkgCRampDisableIa;
-
-/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain
- Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic
- Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
- 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
-**/
- UINT8 SlowSlewRateForIa;
-
-/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain
- Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic
- Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
- 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
-**/
- UINT8 SlowSlewRateForGt;
-
-/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain
- Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic
- Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
- 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
-**/
- UINT8 SlowSlewRateForSa;
-
-/** Offset 0x02A7 - Thermal Design Current current limit
- PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
- Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
-**/
- UINT16 TdcPowerLimit[5];
-
-/** Offset 0x02B1 - AcLoadline
- PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
- 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
-**/
- UINT16 AcLoadline[5];
-
-/** Offset 0x02BB
-**/
- UINT8 UnusedUpdSpace8[10];
-
-/** Offset 0x02C5 - DcLoadline
- PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
- 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
-**/
- UINT16 DcLoadline[5];
-
-/** Offset 0x02CF - Power State 1 Threshold current
- PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi1Threshold[5];
-
-/** Offset 0x02D9 - Power State 2 Threshold current
- PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi2Threshold[5];
-
-/** Offset 0x02E3 - Power State 3 Threshold current
- PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
-**/
- UINT16 Psi3Threshold[5];
-
-/** Offset 0x02ED - Icc Max limit
- PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
-**/
- UINT16 IccMax[5];
-
-/** Offset 0x02F7 - VR Voltage Limit
- PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV.
-**/
- UINT16 VrVoltageLimit[5];
-
-/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain
- Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
- feature enabled. <b>0: False</b>; 1: True
- $EN_DIS
-**/
- UINT8 FastPkgCRampDisableGt;
-
-/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain
- Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
- feature enabled. <b>0: False</b>; 1: True
- $EN_DIS
-**/
- UINT8 FastPkgCRampDisableSa;
-
-/** Offset 0x0303 - Enable VR specific mailbox command
- VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
- VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
- command sent for PS4 exit issue. 11b - Reserved.
- $EN_DIS
-**/
- UINT8 SendVrMbxCmd;
-
-/** Offset 0x0304 - Reserved
- Reserved
-**/
- UINT8 Reserved2;
-
-/** Offset 0x0305 - Enable or Disable TXT
- Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 TxtEnable;
-
-/** Offset 0x0306
-**/
- UINT8 UnusedUpdSpace9[6];
-
-/** Offset 0x030C - Skip Multi-Processor Initialization
- When this is skipped, boot loader must initialize processors before SilicionInit
- API. </b>0: Initialize; <b>1: Skip
- $EN_DIS
-**/
- UINT8 SkipMpInit;
-
-/** Offset 0x030D - McIVR RFI Frequency Prefix
- PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1:
- Minus (-).
-**/
- UINT8 McivrRfiFrequencyPrefix;
-
-/** Offset 0x030E - McIVR RFI Frequency Adjustment
- PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in
- increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>.
-**/
- UINT8 McivrRfiFrequencyAdjust;
-
-/** Offset 0x030F - FIVR RFI Frequency
- PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
- Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
- 0-1535 (Up to 153.5MHz) for 19MHz clock.
-**/
- UINT16 FivrRfiFrequency;
-
-/** Offset 0x0311 - McIVR RFI Spread Spectrum
- PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/-
- 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%.
-**/
- UINT8 McivrSpreadSpectrum;
-
-/** Offset 0x0312 - FIVR RFI Spread Spectrum
- PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>;
- Range: 0.0% to 10.0% (0-100).
-**/
- UINT8 FivrSpreadSpectrum;
-
-/** Offset 0x0313 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain
- Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
- feature enabled. <b>0: False</b>; 1: True
- $EN_DIS
-**/
- UINT8 FastPkgCRampDisableFivr;
-
-/** Offset 0x0314 - Slew Rate configuration for Deep Package C States for VR FIVR domain
- Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic
- Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
- 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
-**/
- UINT8 SlowSlewRateForFivr;
-
-/** Offset 0x0315 - CpuBistData
- Pointer CPU BIST Data
-**/
- UINT32 CpuBistData;
-
-/** Offset 0x0319 - Activates VR mailbox command for Intersil VR C-state issues.
- Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox
- command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails.
-**/
- UINT8 IslVrCmd;
-
-/** Offset 0x031A - Imon slope1 correction
- PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
- Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
-**/
- UINT16 ImonSlope1[5];
-
-/** Offset 0x0324 - CPU VR Power Delivery Design
- Used to communicate the power delivery design capability of the board. This value
- is an enum of the available power delivery segments that are defined in the Platform
- Design Guide.
-**/
- UINT32 VrPowerDeliveryDesign;
-
-/** Offset 0x0328 - ReservedCpuPostMemProduction
- Reserved for CPU Post-Mem Production
- $EN_DIS
-**/
- UINT8 ReservedCpuPostMemProduction[1];
-
-/** Offset 0x0329
-**/
- UINT8 UnusedUpdSpace10[29];
-
-/** Offset 0x0346 - Enable DMI ASPM
- Deprecated.
- $EN_DIS
-**/
- UINT8 PchDmiAspm;
-
-/** Offset 0x0347 - Enable Power Optimizer
- Enable DMI Power Optimizer on PCH side.
- $EN_DIS
-**/
- UINT8 PchPwrOptEnable;
-
-/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble
- Write or erase is blocked by hardware.
-**/
- UINT8 PchWriteProtectionEnable[5];
-
-/** Offset 0x034D - PCH Flash Protection Ranges Read Enble
- Read is blocked by hardware.
-**/
- UINT8 PchReadProtectionEnable[5];
-
-/** Offset 0x0352 - PCH Protect Range Limit
- Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
- limit comparison.
-**/
- UINT16 PchProtectedRangeLimit[5];
-
-/** Offset 0x035C - PCH Protect Range Base
- Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
-**/
- UINT16 PchProtectedRangeBase[5];
-
-/** Offset 0x0366 - Enable Pme
- Enable Azalia wake-on-ring.
- $EN_DIS
-**/
- UINT8 PchHdaPme;
-
-/** Offset 0x0367
-**/
- UINT8 UnusedUpdSpace11;
-
-/** Offset 0x0368 - VC Type
- Virtual Channel Type Select: 0: VC0, 1: VC1.
- 0: VC0, 1: VC1
-**/
- UINT8 PchHdaVcType;
-
-/** Offset 0x0369 - HD Audio Link Frequency
- HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
- 0: 6MHz, 1: 12MHz, 2: 24MHz
-**/
- UINT8 PchHdaLinkFrequency;
-
-/** Offset 0x036A - iDisp-Link Frequency
- iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
- 4: 96MHz, 3: 48MHz
-**/
- UINT8 PchHdaIDispLinkFrequency;
-
-/** Offset 0x036B - iDisp-Link T-mode
- iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T.
- 0: 2T, 1: 1T
-**/
- UINT8 PchHdaIDispLinkTmode;
-
-/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system
- 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
- driver or SST driver supported).
- $EN_DIS
-**/
- UINT8 PchHdaDspUaaCompliance;
-
-/** Offset 0x036D - iDisplay Audio Codec disconnection
- 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
- $EN_DIS
-**/
- UINT8 PchHdaIDispCodecDisconnect;
-
-/** Offset 0x036E
-**/
- UINT8 UnusedUpdSpace12[15];
-
-/** Offset 0x037D - Enable PCH Io Apic Entry 24-119
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIoApicEntry24_119;
-
-/** Offset 0x037E - PCH Io Apic ID
- This member determines IOAPIC ID. Default is 0x02.
-**/
- UINT8 PchIoApicId;
-
-/** Offset 0x037F
-**/
- UINT8 UnusedUpdSpace13;
-
-/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshSpiGpioAssign;
-
-/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshUart0GpioAssign;
-
-/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshUart1GpioAssign;
-
-/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshI2c0GpioAssign;
-
-/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshI2c1GpioAssign;
-
-/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshI2c2GpioAssign;
-
-/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp0GpioAssign;
-
-/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp1GpioAssign;
-
-/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp2GpioAssign;
-
-/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp3GpioAssign;
-
-/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp4GpioAssign;
-
-/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp5GpioAssign;
-
-/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp6GpioAssign;
-
-/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchIshGp7GpioAssign;
-
-/** Offset 0x038E - PCH ISH PDT Unlock Msg
- 0: False; 1: True.
- $EN_DIS
-**/
- UINT8 PchIshPdtUnlock;
-
-/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN
- 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PchLanLtrEnable;
-
-/** Offset 0x0390
-**/
- UINT8 UnusedUpdSpace14[3];
-
-/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK
- Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
- protection.
- $EN_DIS
-**/
- UINT8 PchLockDownBiosLock;
-
-/** Offset 0x0394 - PCH Compatibility Revision ID
- This member describes whether or not the CRID feature of PCH should be enabled.
- $EN_DIS
-**/
- UINT8 PchCrid;
-
-/** Offset 0x0395 - RTC CMOS MEMORY LOCK
- Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
- and and lower 128-byte bank of RTC RAM.
- $EN_DIS
-**/
- UINT8 PchLockDownRtcMemoryLock;
-
-/** Offset 0x0396 - Enable PCIE RP HotPlug
- Indicate whether the root port is hot plug available.
-**/
- UINT8 PcieRpHotPlug[24];
-
-/** Offset 0x03AE - Enable PCIE RP Pm Sci
- Indicate whether the root port power manager SCI is enabled.
-**/
- UINT8 PcieRpPmSci[24];
-
-/** Offset 0x03C6 - Enable PCIE RP Ext Sync
- Indicate whether the extended synch is enabled.
-**/
- UINT8 PcieRpExtSync[24];
-
-/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing
- Indicate whether the Transmitter Half Swing is enabled.
-**/
- UINT8 PcieRpTransmitterHalfSwing[24];
-
-/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect
- Probe CLKREQ# signal before enabling CLKREQ# based power management.
-**/
- UINT8 PcieRpClkReqDetect[24];
-
-/** Offset 0x040E - PCIE RP Advanced Error Report
- Indicate whether the Advanced Error Reporting is enabled.
-**/
- UINT8 PcieRpAdvancedErrorReporting[24];
-
-/** Offset 0x0426 - PCIE RP Unsupported Request Report
- Indicate whether the Unsupported Request Report is enabled.
-**/
- UINT8 PcieRpUnsupportedRequestReport[24];
-
-/** Offset 0x043E - PCIE RP Fatal Error Report
- Indicate whether the Fatal Error Report is enabled.
-**/
- UINT8 PcieRpFatalErrorReport[24];
-
-/** Offset 0x0456 - PCIE RP No Fatal Error Report
- Indicate whether the No Fatal Error Report is enabled.
-**/
- UINT8 PcieRpNoFatalErrorReport[24];
-
-/** Offset 0x046E - PCIE RP Correctable Error Report
- Indicate whether the Correctable Error Report is enabled.
-**/
- UINT8 PcieRpCorrectableErrorReport[24];
-
-/** Offset 0x0486 - PCIE RP System Error On Fatal Error
- Indicate whether the System Error on Fatal Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnFatalError[24];
-
-/** Offset 0x049E - PCIE RP System Error On Non Fatal Error
- Indicate whether the System Error on Non Fatal Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnNonFatalError[24];
-
-/** Offset 0x04B6 - PCIE RP System Error On Correctable Error
- Indicate whether the System Error on Correctable Error is enabled.
-**/
- UINT8 PcieRpSystemErrorOnCorrectableError[24];
-
-/** Offset 0x04CE - PCIE RP Max Payload
- Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
-**/
- UINT8 PcieRpMaxPayload[24];
-
-/** Offset 0x04E6
-**/
- UINT8 UnusedUpdSpace15[24];
-
-/** Offset 0x04FE - PCIE RP Pcie Speed
- Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
- PCH_PCIE_SPEED).
-**/
- UINT8 PcieRpPcieSpeed[24];
-
-/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method
- PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
- 1: hardware equalization; 4: Fixed Coeficients.
-**/
- UINT8 PcieRpGen3EqPh3Method[24];
-
-/** Offset 0x052E - PCIE RP Physical Slot Number
- Indicates the slot number for the root port. Default is the value as root port index.
-**/
- UINT8 PcieRpPhysicalSlotNumber[24];
-
-/** Offset 0x0546 - PCIE RP Completion Timeout
- The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
-**/
- UINT8 PcieRpCompletionTimeout[24];
-
-/** Offset 0x055E
-**/
- UINT8 UnusedUpdSpace16[106];
-
-/** Offset 0x05C8 - PCIE RP Aspm
- The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
- PchPcieAspmAutoConfig.
-**/
- UINT8 PcieRpAspm[24];
-
-/** Offset 0x05E0 - PCIE RP L1 Substates
- The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
- Default is PchPcieL1SubstatesL1_1_2.
-**/
- UINT8 PcieRpL1Substates[24];
-
-/** Offset 0x05F8 - PCIE RP Ltr Enable
- Latency Tolerance Reporting Mechanism.
-**/
- UINT8 PcieRpLtrEnable[24];
-
-/** Offset 0x0610 - PCIE RP Ltr Config Lock
- 0: Disable; 1: Enable.
-**/
- UINT8 PcieRpLtrConfigLock[24];
-
-/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm
- PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1.
-**/
- UINT8 PcieEqPh3LaneParamCm[24];
-
-/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp
- PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1.
-**/
- UINT8 PcieEqPh3LaneParamCp[24];
-
-/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm
- PCH_PCIE_EQ_PARAM. Coefficient C-1.
-**/
- UINT8 PcieSwEqCoeffListCm[5];
-
-/** Offset 0x065D - PCIE Sw Eq CoeffList Cp
- PCH_PCIE_EQ_PARAM. Coefficient C+1.
-**/
- UINT8 PcieSwEqCoeffListCp[5];
-
-/** Offset 0x0662 - PCIE Disable RootPort Clock Gating
- Describes whether the PCI Express Clock Gating for each root port is enabled by
- platform modules. 0: Disable; 1: Enable.
- $EN_DIS
-**/
- UINT8 PcieDisableRootPortClockGating;
-
-/** Offset 0x0663 - PCIE Enable Peer Memory Write
- This member describes whether Peer Memory Writes are enabled on the platform.
- $EN_DIS
-**/
- UINT8 PcieEnablePeerMemoryWrite;
-
-/** Offset 0x0664
-**/
- UINT8 UnusedUpdSpace17;
-
-/** Offset 0x0665 - PCIE Compliance Test Mode
- Compliance Test Mode shall be enabled when using Compliance Load Board.
- $EN_DIS
-**/
- UINT8 PcieComplianceTestMode;
-
-/** Offset 0x0666 - PCIE Rp Function Swap
- Allows BIOS to use root port function number swapping when root port of function
- 0 is disabled.
- $EN_DIS
-**/
- UINT8 PcieRpFunctionSwap;
-
-/** Offset 0x0667
-**/
- UINT8 UnusedUpdSpace18[2];
-
-/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS
- When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
- $EN_DIS
-**/
- UINT8 PchPmPmeB0S5Dis;
-
-/** Offset 0x066A - SPI ChipSelect signal polarity
- Selects SPI ChipSelect signal polarity.
-**/
- UINT8 SerialIoSpiCsPolarity[3];
-
-/** Offset 0x066D - PCIE IMR
- Enables Isolated Memory Region for PCIe.
- $EN_DIS
-**/
- UINT8 PcieRpImrEnabled;
-
-/** Offset 0x066E - PCIE IMR port number
- Selects PCIE root port number for IMR feature.
-**/
- UINT8 PcieRpImrSelection;
-
-/** Offset 0x066F
-**/
- UINT8 UnusedUpdSpace19;
-
-/** Offset 0x0670 - PCH Pm Wol Enable Override
- Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
- $EN_DIS
-**/
- UINT8 PchPmWolEnableOverride;
-
-/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx
- Determine if enable PCIe to wake from deep Sx.
- $EN_DIS
-**/
- UINT8 PchPmPcieWakeFromDeepSx;
-
-/** Offset 0x0672 - PCH Pm WoW lan Enable
- Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
- $EN_DIS
-**/
- UINT8 PchPmWoWlanEnable;
-
-/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable
- Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
- PWRM_CFG3 register.
- $EN_DIS
-**/
- UINT8 PchPmWoWlanDeepSxEnable;
-
-/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx
- Determine if enable LAN to wake from deep Sx.
- $EN_DIS
-**/
- UINT8 PchPmLanWakeFromDeepSx;
-
-/** Offset 0x0675 - PCH Pm Deep Sx Pol
- Deep Sx Policy.
- $EN_DIS
-**/
- UINT8 PchPmDeepSxPol;
-
-/** Offset 0x0676 - PCH Pm Slp S3 Min Assert
- SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
-**/
- UINT8 PchPmSlpS3MinAssert;
-
-/** Offset 0x0677 - PCH Pm Slp S4 Min Assert
- SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
-**/
- UINT8 PchPmSlpS4MinAssert;
-
-/** Offset 0x0678 - PCH Pm Slp Sus Min Assert
- SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
-**/
- UINT8 PchPmSlpSusMinAssert;
-
-/** Offset 0x0679 - PCH Pm Slp A Min Assert
- SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
-**/
- UINT8 PchPmSlpAMinAssert;
-
-/** Offset 0x067A - SLP_S0# Override
- Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled'
- will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion
- when debug is enabled. \n
- Note: This BIOS option should keep 'Auto', other options are intended for advanced
- configuration only.
- 0:Disabled, 1:Enabled, 2:Auto
-**/
- UINT8 SlpS0Override;
-
-/** Offset 0x067B - S0ix Override Settings
- Select 'Auto', it will be auto-configured according to probe type. 'No Change' will
- keep PMC default settings. Or select the desired debug probe type for S0ix Override
- settings.\n
- Reminder: DCI OOB (aka BSSB) uses CCA probe.\n
- Note: This BIOS option should keep 'Auto', other options are intended for advanced
- configuration only.
- 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto
-**/
- UINT8 SlpS0DisQForDebug;
-
-/** Offset 0x067C - USB Overcurrent Override for DbC
- This option overrides USB Over Current enablement state that USB OC will be disabled
- after enabling this option. Enable when DbC is used to avoid signaling conflicts.
- $EN_DIS
-**/
- UINT8 PchEnableDbcObs;
-
-/** Offset 0x067D
-**/
- UINT8 UnusedUpdSpace20[3];
-
-/** Offset 0x0680 - PCH Pm Lpc Clock Run
- This member describes whether or not the LPC ClockRun feature of PCH should be enabled.
- Default value is Disabled
- $EN_DIS
-**/
- UINT8 PchPmLpcClockRun;
-
-/** Offset 0x0681 - PCH Pm Slp Strch Sus Up
- Enable SLP_X Stretching After SUS Well Power Up.
- $EN_DIS
-**/
- UINT8 PchPmSlpStrchSusUp;
-
-/** Offset 0x0682 - PCH Pm Slp Lan Low Dc
- Enable/Disable SLP_LAN# Low on DC Power.
- $EN_DIS
-**/
- UINT8 PchPmSlpLanLowDc;
-
-/** Offset 0x0683 - PCH Pm Pwr Btn Override Period
- PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
-**/
- UINT8 PchPmPwrBtnOverridePeriod;
-
-/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown
- When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
- $EN_DIS
-**/
- UINT8 PchPmDisableDsxAcPresentPulldown;
-
-/** Offset 0x0685
-**/
- UINT8 UnusedUpdSpace21;
-
-/** Offset 0x0686 - PCH Pm Disable Native Power Button
- Power button native mode disable.
- $EN_DIS
-**/
- UINT8 PchPmDisableNativePowerButton;
-
-/** Offset 0x0687 - PCH Pm Slp S0 Enable
- Indicates whether SLP_S0# is to be asserted when PCH reaches idle state.
- $EN_DIS
-**/
- UINT8 PchPmSlpS0Enable;
-
-/** Offset 0x0688 - PCH Pm ME_WAKE_STS
- Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
- $EN_DIS
-**/
- UINT8 PchPmMeWakeSts;
-
-/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS
- Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
- $EN_DIS
-**/
- UINT8 PchPmWolOvrWkSts;
-
-/** Offset 0x068A - PCH Pm Reset Power Cycle Duration
- Could be customized in the unit of second. Please refer to EDS for all support settings.
- 0 is default, 1 is 1 second, 2 is 2 seconds, ...
-**/
- UINT8 PchPmPwrCycDur;
-
-/** Offset 0x068B - PCH Pm Pcie Pll Ssc
- Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
- BIOS override.
-**/
- UINT8 PchPmPciePllSsc;
-
-/** Offset 0x068C
-**/
- UINT8 UnusedUpdSpace22;
-
-/** Offset 0x068D - PCH Sata Pwr Opt Enable
- SATA Power Optimizer on PCH side.
- $EN_DIS
-**/
- UINT8 SataPwrOptEnable;
-
-/** Offset 0x068E - PCH Sata eSATA Speed Limit
- When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
- $EN_DIS
-**/
- UINT8 EsataSpeedLimit;
-
-/** Offset 0x068F - PCH Sata Speed Limit
- Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
-**/
- UINT8 SataSpeedLimit;
-
-/** Offset 0x0690 - Enable SATA Port HotPlug
- Enable SATA Port HotPlug.
-**/
- UINT8 SataPortsHotPlug[8];
-
-/** Offset 0x0698 - Enable SATA Port Interlock Sw
- Enable SATA Port Interlock Sw.
-**/
- UINT8 SataPortsInterlockSw[8];
-
-/** Offset 0x06A0 - Enable SATA Port External
- Enable SATA Port External.
-**/
- UINT8 SataPortsExternal[8];
-
-/** Offset 0x06A8 - Enable SATA Port SpinUp
- Enable the COMRESET initialization Sequence to the device.
-**/
- UINT8 SataPortsSpinUp[8];
-
-/** Offset 0x06B0 - Enable SATA Port Solid State Drive
- 0: HDD; 1: SSD.
-**/
- UINT8 SataPortsSolidStateDrive[8];
-
-/** Offset 0x06B8 - Enable SATA Port Enable Dito Config
- Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
-**/
- UINT8 SataPortsEnableDitoConfig[8];
-
-/** Offset 0x06C0 - Enable SATA Port DmVal
- DITO multiplier. Default is 15.
-**/
- UINT8 SataPortsDmVal[8];
-
-/** Offset 0x06C8 - Enable SATA Port DmVal
- DEVSLP Idle Timeout (DITO), Default is 625.
-**/
- UINT16 SataPortsDitoVal[8];
-
-/** Offset 0x06D8 - Enable SATA Port ZpOdd
- Support zero power ODD.
-**/
- UINT8 SataPortsZpOdd[8];
-
-/** Offset 0x06E0 - PCH Sata Rst Raid Device Id
- Enable RAID Alternate ID.
- 0:Client, 1:Alternate, 2:Server
-**/
- UINT8 SataRstRaidDeviceId;
-
-/** Offset 0x06E1 - PCH Sata Rst Raid0
- RAID0.
- $EN_DIS
-**/
- UINT8 SataRstRaid0;
-
-/** Offset 0x06E2 - PCH Sata Rst Raid1
- RAID1.
- $EN_DIS
-**/
- UINT8 SataRstRaid1;
-
-/** Offset 0x06E3 - PCH Sata Rst Raid10
- RAID10.
- $EN_DIS
-**/
- UINT8 SataRstRaid10;
-
-/** Offset 0x06E4 - PCH Sata Rst Raid5
- RAID5.
- $EN_DIS
-**/
- UINT8 SataRstRaid5;
-
-/** Offset 0x06E5 - PCH Sata Rst Irrt
- Intel Rapid Recovery Technology.
- $EN_DIS
-**/
- UINT8 SataRstIrrt;
-
-/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner
- OROM UI and BANNER.
- $EN_DIS
-**/
- UINT8 SataRstOromUiBanner;
-
-/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay
- 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
-**/
- UINT8 SataRstOromUiDelay;
-
-/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock
- Indicates that the HDD password unlock in the OS is enabled.
- $EN_DIS
-**/
- UINT8 SataRstHddUnlock;
-
-/** Offset 0x06E9 - PCH Sata Rst Led Locate
- Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
- enabled on the OS.
- $EN_DIS
-**/
- UINT8 SataRstLedLocate;
-
-/** Offset 0x06EA - PCH Sata Rst Irrt Only
- Allow only IRRT drives to span internal and external ports.
- $EN_DIS
-**/
- UINT8 SataRstIrrtOnly;
-
-/** Offset 0x06EB - PCH Sata Rst Smart Storage
- RST Smart Storage caching Bit.
- $EN_DIS
-**/
- UINT8 SataRstSmartStorage;
-
-/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable
- Enable Intel RST for PCIe Storage remapping.
-**/
- UINT8 SataRstPcieEnable[3];
-
-/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port
- Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
-**/
- UINT8 SataRstPcieStoragePort[3];
-
-/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay
- PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
-**/
- UINT8 SataRstPcieDeviceResetDelay[3];
-
-/** Offset 0x06F5 - Enable eMMC HS400 Training
- Deprecated.
- $EN_DIS
-**/
- UINT8 PchScsEmmcHs400TuningRequired;
-
-/** Offset 0x06F6 - Set HS400 Tuning Data Valid
- Set if HS400 Tuning Data Valid.
- $EN_DIS
-**/
- UINT8 PchScsEmmcHs400DllDataValid;
-
-/** Offset 0x06F7 - Rx Strobe Delay Control
- Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode).
-**/
- UINT8 PchScsEmmcHs400RxStrobeDll1;
-
-/** Offset 0x06F8 - Tx Data Delay Control
- Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode).
-**/
- UINT8 PchScsEmmcHs400TxDataDll;
-
-/** Offset 0x06F9 - I/O Driver Strength
- Deprecated.
- 0:33 Ohm, 1:40 Ohm, 2:50 Ohm
-**/
- UINT8 PchScsEmmcHs400DriverStrength;
-
-/** Offset 0x06FA - PCH SerialIo I2C Pads Termination
- 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
- 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5
- pads termination respectively. One byte for each controller, byte0 for I2C0, byte1
- for I2C1, and so on.
-**/
- UINT8 PchSerialIoI2cPadsTermination[6];
-
-/** Offset 0x0700
-**/
- UINT8 UnusedUpdSpace23;
-
-/** Offset 0x0701 - PcdSerialIoUart0PinMuxing
- Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled.
- 0:default pins, 1:pins muxed with CNV_BRI/RGI
-**/
- UINT8 SerialIoUart0PinMuxing;
-
-/** Offset 0x0702
-**/
- UINT8 UnusedUpdSpace24[1];
-
-/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines
- Enables UART hardware flow control, CTS and RTS linesh.
-**/
- UINT8 SerialIoUartHwFlowCtrl[3];
-
-/** Offset 0x0706 - UART Number For Debug Purpose
- UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected
- as CNVi BT Core interface, it cannot be used for debug purpose.
- 0:UART0, 1:UART1, 2:UART2
-**/
- UINT8 SerialIoDebugUartNumber;
-
-/** Offset 0x0707 - Enable Debug UART Controller
- Enable debug UART controller after post.
- $EN_DIS
-**/
- UINT8 SerialIoEnableDebugUartAfterPost;
-
-/** Offset 0x0708 - Enable Serial IRQ
- Determines if enable Serial IRQ.
- $EN_DIS
-**/
- UINT8 PchSirqEnable;
-
-/** Offset 0x0709 - Serial IRQ Mode Select
- Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode.
- $EN_DIS
-**/
- UINT8 PchSirqMode;
-
-/** Offset 0x070A - Start Frame Pulse Width
- Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk.
- 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk
-**/
- UINT8 PchStartFramePulse;
-
-/** Offset 0x070B - Reserved
- Reserved
- $EN_DIS
-**/
- UINT8 ReservedForFuture1;
-
-/** Offset 0x070C - Thermal Device SMI Enable
- This locks down SMI Enable on Alert Thermal Sensor Trip.
- $EN_DIS
-**/
- UINT8 PchTsmicLock;
-
-/** Offset 0x070D - Thermal Throttling Custimized T0Level Value
- Custimized T0Level value.
-**/
- UINT16 PchT0Level;
-
-/** Offset 0x070F - Thermal Throttling Custimized T1Level Value
- Custimized T1Level value.
-**/
- UINT16 PchT1Level;
-
-/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value
- Custimized T2Level value.
-**/
- UINT16 PchT2Level;
-
-/** Offset 0x0713 - Enable The Thermal Throttle
- Enable the thermal throttle function.
- $EN_DIS
-**/
- UINT8 PchTTEnable;
-
-/** Offset 0x0714 - PMSync State 13
- When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
- at least T2 state.
- $EN_DIS
-**/
- UINT8 PchTTState13Enable;
-
-/** Offset 0x0715 - Thermal Throttle Lock
- Thermal Throttle Lock.
- $EN_DIS
-**/
- UINT8 PchTTLock;
-
-/** Offset 0x0716 - Thermal Throttling Suggested Setting
- Thermal Throttling Suggested Setting.
- $EN_DIS
-**/
- UINT8 TTSuggestedSetting;
-
-/** Offset 0x0717 - Enable PCH Cross Throttling
- Enable/Disable PCH Cross Throttling
- $EN_DIS
-**/
- UINT8 TTCrossThrottling;
-
-/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable
- DMI Thermal Sensor Autonomous Width Enable.
- $EN_DIS
-**/
- UINT8 PchDmiTsawEn;
-
-/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting
- DMT thermal sensor suggested representative values.
- $EN_DIS
-**/
- UINT8 DmiSuggestedSetting;
-
-/** Offset 0x071A - Thermal Sensor 0 Target Width
- DMT thermal sensor suggested representative values.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS0TW;
-
-/** Offset 0x071B - Thermal Sensor 1 Target Width
- Thermal Sensor 1 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS1TW;
-
-/** Offset 0x071C - Thermal Sensor 2 Target Width
- Thermal Sensor 2 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS2TW;
-
-/** Offset 0x071D - Thermal Sensor 3 Target Width
- Thermal Sensor 3 Target Width.
- 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
-**/
- UINT8 DmiTS3TW;
-
-/** Offset 0x071E - Port 0 T1 Multipler
- Port 0 T1 Multipler.
-**/
- UINT8 SataP0T1M;
-
-/** Offset 0x071F - Port 0 T2 Multipler
- Port 0 T2 Multipler.
-**/
- UINT8 SataP0T2M;
-
-/** Offset 0x0720 - Port 0 T3 Multipler
- Port 0 T3 Multipler.
-**/
- UINT8 SataP0T3M;
-
-/** Offset 0x0721 - Port 0 Tdispatch
- Port 0 Tdispatch.
-**/
- UINT8 SataP0TDisp;
-
-/** Offset 0x0722 - Port 1 T1 Multipler
- Port 1 T1 Multipler.
-**/
- UINT8 SataP1T1M;
-
-/** Offset 0x0723 - Port 1 T2 Multipler
- Port 1 T2 Multipler.
-**/
- UINT8 SataP1T2M;
-
-/** Offset 0x0724 - Port 1 T3 Multipler
- Port 1 T3 Multipler.
-**/
- UINT8 SataP1T3M;
-
-/** Offset 0x0725 - Port 1 Tdispatch
- Port 1 Tdispatch.
-**/
- UINT8 SataP1TDisp;
-
-/** Offset 0x0726 - Port 0 Tinactive
- Port 0 Tinactive.
-**/
- UINT8 SataP0Tinact;
-
-/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch
- Port 0 Alternate Fast Init Tdispatch.
- $EN_DIS
-**/
- UINT8 SataP0TDispFinit;
-
-/** Offset 0x0728 - Port 1 Tinactive
- Port 1 Tinactive.
-**/
- UINT8 SataP1Tinact;
-
-/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch
- Port 1 Alternate Fast Init Tdispatch.
- $EN_DIS
-**/
- UINT8 SataP1TDispFinit;
-
-/** Offset 0x072A - Sata Thermal Throttling Suggested Setting
- Sata Thermal Throttling Suggested Setting.
- $EN_DIS
-**/
- UINT8 SataThermalSuggestedSetting;
-
-/** Offset 0x072B - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
- $EN_DIS
-**/
- UINT8 PchMemoryThrottlingEnable;
-
-/** Offset 0x072C - Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryPmsyncEnable[2];
-
-/** Offset 0x072E - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryC0TransmitEnable[2];
-
-/** Offset 0x0730 - Enable Memory Thermal Throttling
- Enable Memory Thermal Throttling.
-**/
- UINT8 PchMemoryPinSelection[2];
-
-/** Offset 0x0732 - Thermal Device Temperature
- Decides the temperature.
-**/
- UINT16 PchTemperatureHotLevel;
-
-/** Offset 0x0734 - Enable xHCI Compliance Mode
- Compliance Mode can be enabled for testing through this option but this is disabled
- by default.
- $EN_DIS
-**/
- UINT8 PchEnableComplianceMode;
-
-/** Offset 0x0735 - USB2 Port Over Current Pin
- Describe the specific over current pin number of USB 2.0 Port N.
-**/
- UINT8 Usb2OverCurrentPin[16];
-
-/** Offset 0x0745 - USB3 Port Over Current Pin
- Describe the specific over current pin number of USB 3.0 Port N.
-**/
- UINT8 Usb3OverCurrentPin[10];
-
-/** Offset 0x074F - Enable 8254 Static Clock Gating
- Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
- might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
- boot legacy OS using 8254 timer. Also enable this while S0ix is enabled.
- $EN_DIS
-**/
- UINT8 Enable8254ClockGating;
-
-/** Offset 0x0750 - PCH Sata Rst Optane Memory
- Optane Memory
- $EN_DIS
-**/
- UINT8 SataRstOptaneMemory;
-
-/** Offset 0x0751 - PCH Sata Rst CPU Attached Storage
- CPU Attached Storage
- $EN_DIS
-**/
- UINT8 SataRstCpuAttachedStorage;
-
-/** Offset 0x0752
-**/
- UINT8 UnusedUpdSpace25[2];
-
-/** Offset 0x0754 - Pch PCIE device override table pointer
- The PCIe device table is being used to override PCIe device ASPM settings. This
- is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
- refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
- must be 0.
-**/
- UINT32 PchPcieDeviceOverrideTablePtr;
-
-/** Offset 0x0758 - Enable TCO timer.
- When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
- huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
- emulation must be enabled, and WDAT table must not be exposed to the OS.
- $EN_DIS
-**/
- UINT8 EnableTcoTimer;
-
-/** Offset 0x0759 - BgpdtHash[4]
- BgpdtHash values
-**/
- UINT64 BgpdtHash[4];
-
-/** Offset 0x0779 - BiosGuardAttr
- BiosGuardAttr default values
-**/
- UINT32 BiosGuardAttr;
-
-/** Offset 0x077D - BiosGuardModulePtr
- BiosGuardModulePtr default values
-**/
- UINT64 BiosGuardModulePtr;
-
-/** Offset 0x0785 - SendEcCmd
- SendEcCmd function pointer. \n
- @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
- EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
-**/
- UINT64 SendEcCmd;
-
-/** Offset 0x078D - EcCmdProvisionEav
- Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
-**/
- UINT8 EcCmdProvisionEav;
-
-/** Offset 0x078E - EcCmdLock
- EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
-**/
- UINT8 EcCmdLock;
-
-/** Offset 0x078F - SgxEpoch0
- SgxEpoch0 default values
-**/
- UINT64 SgxEpoch0;
-
-/** Offset 0x0797 - SgxEpoch1
- SgxEpoch1 default values
-**/
- UINT64 SgxEpoch1;
-
-/** Offset 0x079F - SgxSinitNvsData
- SgxSinitNvsData default values
-**/
- UINT8 SgxSinitNvsData;
-
-/** Offset 0x07A0 - Si Config CSM Flag.
- Platform specific common policies that used by several silicon components. CSM status flag.
- $EN_DIS
-**/
- UINT8 SiCsmFlag;
-
-/** Offset 0x07A1
-**/
- UINT32 SiSsidTablePtr;
-
-/** Offset 0x07A5
-**/
- UINT16 SiNumberOfSsidTableEntry;
-
-/** Offset 0x07A7 - SATA RST Interrupt Mode
- Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
- 0:Msix, 1:Msi, 2:Legacy
-**/
- UINT8 SataRstInterrupt;
-
-/** Offset 0x07A8 - ME Unconfig on RTC clear
- 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
- 2: Cmos is clear, status unkonwn. 3: Reserved
- 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
- is clear, 3: Reserved
-**/
- UINT8 MeUnconfigOnRtcClear;
-
-/** Offset 0x07A9 - Enable PS_ON.
- PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
- target that will be required by the California Energy Commission (CEC). When FALSE,
- PS_ON is to be disabled.
- $EN_DIS
-**/
- UINT8 PsOnEnable;
-
-/** Offset 0x07AA - Pmc Cpu C10 Gate Pin Enable
- Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
- and VccSTG rails instead of SLP_S0# pin.
- $EN_DIS
-**/
- UINT8 PmcCpuC10GatePinEnable;
-
-/** Offset 0x07AB - Pch Dmi Aspm Ctrl
- ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
- 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
-**/
- UINT8 PchDmiAspmCtrl;
-
-/** Offset 0x07AC
-**/
- UINT8 ReservedFspsUpd[1];
-} FSP_S_CONFIG;
-
-/** Fsp S Test Configuration
-**/
-typedef struct {
-
-/** Offset 0x07AD
-**/
- UINT32 Signature;
-
-/** Offset 0x07B1 - Enable/Disable Device 7
- Enable: Device 7 enabled, Disable (Default): Device 7 disabled
- $EN_DIS
-**/
- UINT8 ChapDeviceEnable;
-
-/** Offset 0x07B2 - Skip PAM register lock
- Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
- PAM registers will be locked by RC
- $EN_DIS
-**/
- UINT8 SkipPamLock;
-
-/** Offset 0x07B3 - EDRAM Test Mode
- Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
- PAM registers will be locked by RC
- 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
-**/
- UINT8 EdramTestMode;
-
-/** Offset 0x07B4 - DMI Extended Sync Control
- Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended
- Sync Control
- $EN_DIS
-**/
- UINT8 DmiExtSync;
-
-/** Offset 0x07B5 - DMI IOT Control
- Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control
- $EN_DIS
-**/
- UINT8 DmiIot;
-
-/** Offset 0x07B6 - PEG Max Payload size per root port
- 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B
- 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B
-**/
- UINT8 PegMaxPayload[4];
-
-/** Offset 0x07BA - Enable/Disable IGFX RenderStandby
- Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
- $EN_DIS
-**/
- UINT8 RenderStandby;
-
-/** Offset 0x07BB - Enable/Disable IGFX PmSupport
- Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
- $EN_DIS
-**/
- UINT8 PmSupport;
-
-/** Offset 0x07BC - Enable/Disable CdynmaxClamp
- Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp
- $EN_DIS
-**/
- UINT8 CdynmaxClampEnable;
-
-/** Offset 0x07BD - Disable VT-d
- 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
- $EN_DIS
-**/
- UINT8 VtdDisable;
-
-/** Offset 0x07BE - GT Frequency Limit
- 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
- 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
- 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
- 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
- 0x18: 1200 Mhz
- 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
- 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
- 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
- 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
- 0x18: 1200 Mhz
-**/
- UINT8 GtFreqMax;
-
-/** Offset 0x07BF - Disable Turbo GT
- 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
- $EN_DIS
-**/
- UINT8 DisableTurboGt;
-
-/** Offset 0x07C0 - SaPostMemTestRsvd
- Reserved for SA Post-Mem Test
- $EN_DIS
-**/
- UINT8 SaPostMemTestRsvd[11];
-
-/** Offset 0x07CB - 1-Core Ratio Limit
- 1-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 1-Core Ratio Limit + OC Bins.This 1-Core Ratio Limit Must be greater than or equal
- to 2-Core Ratio Limit, 3-Core Ratio Limit, 4-Core Ratio Limit, 5-Core Ratio Limit,
- 6-Core Ratio Limit, 7-Core Ratio Limit, 8-Core Ratio Limit. Range is 0 to 83
-**/
- UINT8 OneCoreRatioLimit;
-
-/** Offset 0x07CC - 2-Core Ratio Limit
- 2-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 2-Core Ratio Limit + OC Bins.This 2-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 TwoCoreRatioLimit;
-
-/** Offset 0x07CD - 3-Core Ratio Limit
- 3-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 3-Core Ratio Limit + OC Bins.This 3-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 ThreeCoreRatioLimit;
-
-/** Offset 0x07CE - 4-Core Ratio Limit
- 4-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 4-Core Ratio Limit + OC Bins.This 4-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
-**/
- UINT8 FourCoreRatioLimit;
-
-/** Offset 0x07CF - Enable or Disable HWP
- Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
- 2-3:Reserved
- $EN_DIS
-**/
- UINT8 Hwp;
-
-/** Offset 0x07D0 - Hardware Duty Cycle Control
- Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
- $EN_DIS
-**/
- UINT8 HdcControl;
-
-/** Offset 0x07D1 - Package Long duration turbo mode time
- Package Long duration turbo mode time window in seconds. Valid values(Unit in seconds)
- 0 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
-**/
- UINT8 PowerLimit1Time;
-
-/** Offset 0x07D2 - Short Duration Turbo Mode
- Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 PowerLimit2;
-
-/** Offset 0x07D3 - Turbo settings Lock
- Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
- $EN_DIS
-**/
- UINT8 TurboPowerLimitLock;
-
-/** Offset 0x07D4 - Package PL3 time window
- Package PL3 time window range for this policy from 0 to 64ms
-**/
- UINT8 PowerLimit3Time;
-
-/** Offset 0x07D5 - Package PL3 Duty Cycle
- Package PL3 Duty Cycle; Valid Range is 0 to 100
-**/
- UINT8 PowerLimit3DutyCycle;
-
-/** Offset 0x07D6 - Package PL3 Lock
- Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable
- $EN_DIS
-**/
- UINT8 PowerLimit3Lock;
-
-/** Offset 0x07D7 - Package PL4 Lock
- Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable
- $EN_DIS
-**/
- UINT8 PowerLimit4Lock;
-
-/** Offset 0x07D8 - TCC Activation Offset
- TCC Activation Offset. Offset from factory set TCC activation temperature at which
- the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
- Temperature, in volts.For Y SKU, the recommended default for this policy is <b>10</b>,
- For all other SKUs the recommended default are <b>0</b>
-**/
- UINT8 TccActivationOffset;
-
-/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable
- Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
- below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
- For all other SKUs the recommended default are <b>0: Disabled</b>.
- $EN_DIS
-**/
- UINT8 TccOffsetClamp;
-
-/** Offset 0x07DA - Tcc Offset Lock
- Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
- target; 0: Disabled; <b>1: Enabled </b>.
- $EN_DIS
-**/
- UINT8 TccOffsetLock;
-
-/** Offset 0x07DB - Custom Ratio State Entries
- The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
- ratio table.Sets the number of custom P-states. At least 2 states must be present
-**/
- UINT8 NumberOfEntries;
-
-/** Offset 0x07DC - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 1. Valid Range 0 to 128
-**/
- UINT8 Custom1PowerLimit1Time;
-
-/** Offset 0x07DD - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
-**/
- UINT8 Custom1TurboActivationRatio;
-
-/** Offset 0x07DE - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom1ConfigTdpControl;
-
-/** Offset 0x07DF - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 2. Valid Range 0 to 128
-**/
- UINT8 Custom2PowerLimit1Time;
-
-/** Offset 0x07E0 - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
-**/
- UINT8 Custom2TurboActivationRatio;
-
-/** Offset 0x07E1 - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom2ConfigTdpControl;
-
-/** Offset 0x07E2 - Custom Short term Power Limit time window
- Short term Power Limit time window value for custom CTDP level 3. Valid Range 0 to 128
-**/
- UINT8 Custom3PowerLimit1Time;
-
-/** Offset 0x07E3 - Custom Turbo Activation Ratio
- Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
-**/
- UINT8 Custom3TurboActivationRatio;
-
-/** Offset 0x07E4 - Custom Config Tdp Control
- Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
-**/
- UINT8 Custom3ConfigTdpControl;
-
-/** Offset 0x07E5 - ConfigTdp mode settings Lock
- Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 ConfigTdpLock;
-
-/** Offset 0x07E6 - Load Configurable TDP SSDT
- Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ConfigTdpBios;
-
-/** Offset 0x07E7 - PL1 Enable value
- PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 PsysPowerLimit1;
-
-/** Offset 0x07E8 - PL1 timewindow
- PL1 timewindow in seconds.Valid values(Unit in seconds) 0 to 8 , 10 , 12 ,14 , 16
- , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
-**/
- UINT8 PsysPowerLimit1Time;
-
-/** Offset 0x07E9 - PL2 Enable Value
- PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
- 1: Enable.
- $EN_DIS
-**/
- UINT8 PsysPowerLimit2;
-
-/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher
- Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MlcStreamerPrefetcher;
-
-/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher
- Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 MlcSpatialPrefetcher;
-
-/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions
- Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MonitorMwaitEnable;
-
-/** Offset 0x07ED - Enable or Disable initialization of machine check registers
- Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 MachineCheckEnable;
-
-/** Offset 0x07EE - Enable or Disable processor debug features
- Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 DebugInterfaceEnable;
-
-/** Offset 0x07EF - Lock or Unlock debug interface features
- Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 DebugInterfaceLockEnable;
-
-/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI
- AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
- 1: HALT loop, 2: MWAIT loop, 3: RUN loop
-**/
- UINT8 ApIdleManner;
-
-/** Offset 0x07F1 - Control on Processor Trace output scheme
- Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
- 0: Single Range Output, 1: ToPA Output
-**/
- UINT8 ProcessorTraceOutputScheme;
-
-/** Offset 0x07F2 - Enable or Disable Processor Trace feature
- Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ProcessorTraceEnable;
-
-/** Offset 0x07F3 - Base of memory region allocated for Processor Trace
- Base address of memory region allocated for Processor Trace. Processor Trace requires
- 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
-**/
- UINT64 ProcessorTraceMemBase;
-
-/** Offset 0x07FB - Memory region allocation for Processor Trace
- Length in bytes of memory region allocated for Processor Trace. Processor Trace
- requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
-**/
- UINT32 ProcessorTraceMemLength;
-
-/** Offset 0x07FF - Enable or Disable Voltage Optimization feature
- Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 VoltageOptimization;
-
-/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology
- Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 Eist;
-
-/** Offset 0x0801 - Enable or Disable Energy Efficient P-state
- Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
- <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnergyEfficientPState;
-
-/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo
- Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
- <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 EnergyEfficientTurbo;
-
-/** Offset 0x0803 - Enable or Disable T states
- Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 TStates;
-
-/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT#
- Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 BiProcHot;
-
-/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally
- Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 DisableProcHotOut;
-
-/** Offset 0x0806 - Enable or Disable PROCHOT# Response
- Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 ProcHotResponse;
-
-/** Offset 0x0807 - Enable or Disable VR Thermal Alert
- Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 DisableVrThermalAlert;
-
-/** Offset 0x0808 - Enable or Disable Thermal Reporting
- Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 AutoThermalReporting;
-
-/** Offset 0x0809 - Enable or Disable Thermal Monitor
- Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 ThermalMonitor;
-
-/** Offset 0x080A - Enable or Disable CPU power states (C-states)
- Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 Cx;
-
-/** Offset 0x080B - Configure C-State Configuration Lock
- Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
- $EN_DIS
-**/
- UINT8 PmgCstCfgCtrlLock;
-
-/** Offset 0x080C - Enable or Disable Enhanced C-states
- Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1e;
-
-/** Offset 0x080D - Enable or Disable Package Cstate Demotion
- Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 PkgCStateDemotion;
-
-/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion
- Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 PkgCStateUnDemotion;
-
-/** Offset 0x080F - Enable or Disable CState-Pre wake
- Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 CStatePreWake;
-
-/** Offset 0x0810 - Enable or Disable TimedMwait Support.
- Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 TimedMwait;
-
-/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection
- Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 CstCfgCtrIoMwaitRedirection;
-
-/** Offset 0x0812 - Set the Max Pkg Cstate
- Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
- C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
- 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
-**/
- UINT8 PkgCStateLimit;
-
-/** Offset 0x0813 - TimeUnit for C-State Latency Control0
- TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl0TimeUnit;
-
-/** Offset 0x0814 - TimeUnit for C-State Latency Control1
- TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl1TimeUnit;
-
-/** Offset 0x0815 - TimeUnit for C-State Latency Control2
- TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl2TimeUnit;
-
-/** Offset 0x0816 - TimeUnit for C-State Latency Control3
- TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl3TimeUnit;
-
-/** Offset 0x0817 - TimeUnit for C-State Latency Control4
- Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl4TimeUnit;
-
-/** Offset 0x0818 - TimeUnit for C-State Latency Control5
- TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
- , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
-**/
- UINT8 CstateLatencyControl5TimeUnit;
-
-/** Offset 0x0819 - Interrupt Redirection Mode Select
- Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4:
- PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change.
-**/
- UINT8 PpmIrmSetting;
-
-/** Offset 0x081A - Lock prochot configuration
- Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
- $EN_DIS
-**/
- UINT8 ProcHotLock;
-
-/** Offset 0x081B - Configuration for boot TDP selection
- Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
- Up;0xFF : Deactivate
-**/
- UINT8 ConfigTdpLevel;
-
-/** Offset 0x081C - Race To Halt
- Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
- in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
- through MSR 1FC bit 20)Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 RaceToHalt;
-
-/** Offset 0x081D - Max P-State Ratio
- Max P-State Ratio, Valid Range 0 to 0x7F
-**/
- UINT8 MaxRatio;
-
-/** Offset 0x081E - P-state ratios for custom P-state table
- P-state ratios for custom P-state table. NumberOfEntries has valid range between
- 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
- are configurable. Valid Range of each entry is 0 to 0x7F
-**/
- UINT8 StateRatio[40];
-
-/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table
- P-state ratios for max 16 version of custom P-state table. This table is used for
- OS versions limited to a max of 16 P-States. If the first entry of this table is
- 0, or if Number of Entries is 16 or less, then this table will be ignored, and
- up to the top 16 values of the StateRatio table will be used instead. Valid Range
- of each entry is 0 to 0x7F
-**/
- UINT8 StateRatioMax16[16];
-
-/** Offset 0x0856 - Platform Power Pmax
- PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
- Range 0-1024 Watts. Value of 800 = 100W
-**/
- UINT16 PsysPmax;
-
-/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0
- Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl0Irtl;
-
-/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1
- Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl1Irtl;
-
-/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2
- Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl2Irtl;
-
-/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3
- Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl3Irtl;
-
-/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4
- Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl4Irtl;
-
-/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5
- Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF
-**/
- UINT16 CstateLatencyControl5Irtl;
-
-/** Offset 0x0864 - Package Long duration turbo mode power limit
- Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
- Valid Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit1;
-
-/** Offset 0x0868 - Package Short duration turbo mode power limit
- Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit2Power;
-
-/** Offset 0x086C - Package PL3 power limit
- Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit3;
-
-/** Offset 0x0870 - Package PL4 power limit
- Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 PowerLimit4;
-
-/** Offset 0x0874 - Tcc Offset Time Window for RATL
- Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 TccOffsetTimeWindowForRatl;
-
-/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1
- Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom1PowerLimit1;
-
-/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1
- Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom1PowerLimit2;
-
-/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2
- Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom2PowerLimit1;
-
-/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2
- Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom2PowerLimit2;
-
-/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3
- Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom3PowerLimit1;
-
-/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3
- Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
- Range 0 to 4095875 in Step size of 125
-**/
- UINT32 Custom3PowerLimit2;
-
-/** Offset 0x0890 - Platform PL1 power
- Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
- 0 to 4095875 in Step size of 125
-**/
- UINT32 PsysPowerLimit1Power;
-
-/** Offset 0x0894 - Platform PL2 power
- Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
- 0 to 4095875 in Step size of 125
-**/
- UINT32 PsysPowerLimit2Power;
-
-/** Offset 0x0898 - Set Three Strike Counter Disable
- False (default): Three Strike counter will be incremented and True: Prevents Three
- Strike counter from incrementing; <b>0: False</b>; 1: True.
- 0: False, 1: True
-**/
- UINT8 ThreeStrikeCounterDisable;
-
-/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
- Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 HwpInterruptControl;
-
-/** Offset 0x089A - 5-Core Ratio Limit
- 5-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 5-Core Ratio Limit + OC Bins.This 5-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 FiveCoreRatioLimit;
-
-/** Offset 0x089B - 6-Core Ratio Limit
- 6-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 6-Core Ratio Limit + OC Bins.This 6-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 SixCoreRatioLimit;
-
-/** Offset 0x089C - 7-Core Ratio Limit
- 7-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 7-Core Ratio Limit + OC Bins.This 7-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 SevenCoreRatioLimit;
-
-/** Offset 0x089D - 8-Core Ratio Limit
- 8-Core Ratio Limit: For XE part: LFM to 255, For overclocking part: LFM to Fused
- 8-Core Ratio Limit + OC Bins.This 8-Core Ratio Limit Must be Less than or equal
- to 1-Core Ratio Limit.Range is 0 to 83
- 0x0:0xFF
-**/
- UINT8 EightCoreRatioLimit;
-
-/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0
- Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
- $EN_DIS
-**/
- UINT8 EnableItbm;
-
-/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver
- Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
- $EN_DIS
-**/
- UINT8 EnableItbmDriver;
-
-/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion
- Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1StateAutoDemotion;
-
-/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion
- Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C1StateUnDemotion;
-
-/** Offset 0x08A2 - CpuWakeUpTimer
- Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased
- to 180 seconds. 0: Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 CpuWakeUpTimer;
-
-/** Offset 0x08A3 - Minimum Ring ratio limit override
- Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
- ratio limit
-**/
- UINT8 MinRingRatioLimit;
-
-/** Offset 0x08A4 - Minimum Ring ratio limit override
- Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
- ratio limit
-**/
- UINT8 MaxRingRatioLimit;
-
-/** Offset 0x08A5 - Enable or Disable C3 Cstate Demotion
- Enable or Disable C3 Cstate Demotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C3StateAutoDemotion;
-
-/** Offset 0x08A6 - Enable or Disable C3 Cstate UnDemotion
- Enable or Disable C3 Cstate UnDemotion. Disable; <b>1: Enable</b>
- $EN_DIS
-**/
- UINT8 C3StateUnDemotion;
-
-/** Offset 0x08A7 - ReservedCpuPostMemTest
- Reserved for CPU Post-Mem Test
- $EN_DIS
-**/
- UINT8 ReservedCpuPostMemTest[19];
-
-/** Offset 0x08BA - SgxSinitDataFromTpm
- SgxSinitDataFromTpm default values
-**/
- UINT8 SgxSinitDataFromTpm;
-
-/** Offset 0x08BB - End of Post message
- Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
- EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI
- 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
-**/
- UINT8 EndOfPostMessage;
-
-/** Offset 0x08BC - D0I3 Setting for HECI Disable
- Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
- HECI devices
- $EN_DIS
-**/
- UINT8 DisableD0I3SettingForHeci;
-
-/** Offset 0x08BD - HD Audio Reset Wait Timer
- The delay timer after Azalia reset, the value is number of microseconds. Default is 600.
-**/
- UINT16 PchHdaResetWaitTimer;
-
-/** Offset 0x08BF - Enable LOCKDOWN SMI
- Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
- $EN_DIS
-**/
- UINT8 PchLockDownGlobalSmi;
-
-/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface
- Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
- $EN_DIS
-**/
- UINT8 PchLockDownBiosInterface;
-
-/** Offset 0x08C1 - Unlock all GPIO pads
- Force all GPIO pads to be unlocked for debug purpose.
- $EN_DIS
-**/
- UINT8 PchUnlockGpioPads;
-
-/** Offset 0x08C2 - PCH Unlock SBI access
- Deprecated
- $EN_DIS
-**/
- UINT8 PchSbiUnlock;
-
-/** Offset 0x08C3 - PCH Unlock SideBand access
- The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
- 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
- $EN_DIS
-**/
- UINT8 PchSbAccessUnlock;
-
-/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency
- Latency Tolerance Reporting, Max Snoop Latency.
-**/
- UINT16 PcieRpLtrMaxSnoopLatency[24];
-
-/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency
- Latency Tolerance Reporting, Max Non-Snoop Latency.
-**/
- UINT16 PcieRpLtrMaxNoSnoopLatency[24];
-
-/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode
- Latency Tolerance Reporting, Snoop Latency Override Mode.
-**/
- UINT8 PcieRpSnoopLatencyOverrideMode[24];
-
-/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Snoop Latency Override Multiplier.
-**/
- UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
-
-/** Offset 0x0954 - PCIE RP Snoop Latency Override Value
- Latency Tolerance Reporting, Snoop Latency Override Value.
-**/
- UINT16 PcieRpSnoopLatencyOverrideValue[24];
-
-/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode
- Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
-**/
- UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
-
-/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier
- Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
-**/
- UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
-
-/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value
- Latency Tolerance Reporting, Non-Snoop Latency Override Value.
-**/
- UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
-
-/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale
- Specifies scale used for slot power limit value. Leave as 0 to set to default.
-**/
- UINT8 PcieRpSlotPowerLimitScale[24];
-
-/** Offset 0x09FC - PCIE RP Slot Power Limit Value
- Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
-**/
- UINT16 PcieRpSlotPowerLimitValue[24];
-
-/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset
- Used during Gen3 Link Equalization. Used for all lanes. Default is 5.
-**/
- UINT8 PcieRpUptp[24];
-
-/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset
- Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
-**/
- UINT8 PcieRpDptp[24];
-
-/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode
- This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
- 1: Enable.
- $EN_DIS
-**/
- UINT8 PcieEnablePort8xhDecode;
-
-/** Offset 0x0A5D - PCIE Port8xh Decode Port Index
- The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
-**/
- UINT8 PchPciePort8xhDecodePortIndex;
-
-/** Offset 0x0A5E - PCH Energy Reporting
- Disable/Enable PCH to CPU energy report feature.
- $EN_DIS
-**/
- UINT8 PchPmDisableEnergyReport;
-
-/** Offset 0x0A5F - PCH Sata Test Mode
- Allow entrance to the PCH SATA test modes.
- $EN_DIS
-**/
- UINT8 SataTestMode;
-
-/** Offset 0x0A60 - PCH USB OverCurrent mapping lock enable
- If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
- that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
- $EN_DIS
-**/
- UINT8 PchXhciOcLock;
-
-/** Offset 0x0A61
-**/
- UINT8 UnusedUpdSpace26[17];
-
-/** Offset 0x0A72 - Skip POSTBOOT SAI
- Deprecated
- $EN_DIS
-**/
- UINT8 SkipPostBootSai;
-
-/** Offset 0x0A73 - Mctp Broadcast Cycle
- Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
- $EN_DIS
-**/
- UINT8 MctpBroadcastCycle;
-
-/** Offset 0x0A74
-**/
- UINT8 ReservedFspsTestUpd[12];
-} FSP_S_TEST_CONFIG;
-
-/** Fsp S UPD Configuration
-**/
-typedef struct {
-
-/** Offset 0x0000
-**/
- FSP_UPD_HEADER FspUpdHeader;
-
-/** Offset 0x0020
-**/
- FSP_S_CONFIG FspsConfig;
-
-/** Offset 0x07AD
-**/
- FSP_S_TEST_CONFIG FspsTestConfig;
-
-/** Offset 0x0A80
-**/
- UINT16 UpdTerminator;
-} FSPS_UPD;
-
-#pragma pack()
-
-#endif
+
+/** Fsp S Configuration
+**/
+typedef struct {
+
+/** Offset 0x0020 - Logo Pointer
+ Points to PEI Display Logo Image
+**/
+ UINT32 LogoPtr;
+
+/** Offset 0x0024 - Logo Size
+ Size of PEI Display Logo Image
+**/
+ UINT32 LogoSize;
+
+/** Offset 0x0028 - Graphics Configuration Ptr
+ Points to VBT
+**/
+ UINT32 GraphicsConfigPtr;
+
+/** Offset 0x002C - Enable Device 4
+ Enable/disable Device 4
+ $EN_DIS
+**/
+ UINT8 Device4Enable;
+
+/** Offset 0x002D - Enable HD Audio DSP
+ Enable/disable HD Audio DSP feature.
+ $EN_DIS
+**/
+ UINT8 PchHdaDspEnable;
+
+/** Offset 0x002E
+**/
+ UINT8 UnusedUpdSpace0[3];
+
+/** Offset 0x0031 - Enable eMMC Controller
+ Enable/disable eMMC Controller.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcEnabled;
+
+/** Offset 0x0032 - Enable eMMC HS400 Mode
+ Enable eMMC HS400 Mode.
+ $EN_DIS
+**/
+ UINT8 ScsEmmcHs400Enabled;
+
+/** Offset 0x0033 - Enable SdCard Controller
+ Enable/disable SD Card Controller.
+ $EN_DIS
+**/
+ UINT8 ScsSdCardEnabled;
+
+/** Offset 0x0034 - Show SPI controller
+ Enable/disable to show SPI controller.
+ $EN_DIS
+**/
+ UINT8 ShowSpiController;
+
+/** Offset 0x0035
+**/
+ UINT8 UnusedUpdSpace1[3];
+
+/** Offset 0x0038 - MicrocodeRegionBase
+ Memory Base of Microcode Updates
+**/
+ UINT32 MicrocodeRegionBase;
+
+/** Offset 0x003C - MicrocodeRegionSize
+ Size of Microcode Updates
+**/
+ UINT32 MicrocodeRegionSize;
+
+/** Offset 0x0040 - Turbo Mode
+ Enable/Disable Turbo mode. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 TurboMode;
+
+/** Offset 0x0041 - Enable SATA SALP Support
+ Enable/disable SATA Aggressive Link Power Management.
+ $EN_DIS
+**/
+ UINT8 SataSalpSupport;
+
+/** Offset 0x0042 - Enable SATA ports
+ Enable/disable SATA ports. One byte for each port, byte0 for port0, byte1 for port1,
+ and so on.
+**/
+ UINT8 SataPortsEnable[8];
+
+/** Offset 0x004A - Enable SATA DEVSLP Feature
+ Enable/disable SATA DEVSLP per port. 0 is disable, 1 is enable. One byte for each
+ port, byte0 for port0, byte1 for port1, and so on.
+**/
+ UINT8 SataPortsDevSlp[8];
+
+/** Offset 0x0052 - Enable USB2 ports
+ Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb20Enable[16];
+
+/** Offset 0x0062 - Enable USB3 ports
+ Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
+ port1, and so on.
+**/
+ UINT8 PortUsb30Enable[10];
+
+/** Offset 0x006C - Enable xDCI controller
+ Enable/disable to xDCI controller.
+ $EN_DIS
+**/
+ UINT8 XdciEnable;
+
+/** Offset 0x006D
+**/
+ UINT8 UnusedUpdSpace2[2];
+
+/** Offset 0x006F - Enable SerialIo Device Mode
+ 0:Disabled, 1:PCI Mode, 2:Acpi mode, 3:Hidden mode (Legacy UART mode) - Enable/disable
+ SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5,SPI0,SPI1,SPI2,UART0,UART1,UART2 device
+ mode respectively. One byte for each controller, byte0 for I2C0, byte1 for I2C1,
+ and so on.
+**/
+ UINT8 SerialIoDevMode[12];
+
+/** Offset 0x007B - Address of PCH_DEVICE_INTERRUPT_CONFIG table.
+ The address of the table of PCH_DEVICE_INTERRUPT_CONFIG.
+**/
+ UINT32 DevIntConfigPtr;
+
+/** Offset 0x007F - Number of DevIntConfig Entry
+ Number of Device Interrupt Configuration Entry. If this is not zero, the DevIntConfigPtr
+ must not be NULL.
+**/
+ UINT8 NumOfDevIntConfig;
+
+/** Offset 0x0080 - PIRQx to IRQx Map Config
+ PIRQx to IRQx mapping. The valid value is 0x00 to 0x0F for each. First byte is for
+ PIRQA, second byte is for PIRQB, and so on. The setting is only available in Legacy
+ 8259 PCI mode.
+**/
+ UINT8 PxRcConfig[8];
+
+/** Offset 0x0088 - Select GPIO IRQ Route
+ GPIO IRQ Select. The valid value is 14 or 15.
+**/
+ UINT8 GpioIrqRoute;
+
+/** Offset 0x0089 - Select SciIrqSelect
+ SCI IRQ Select. The valid value is 9, 10, 11, and 20, 21, 22, 23 for APIC only.
+**/
+ UINT8 SciIrqSelect;
+
+/** Offset 0x008A - Select TcoIrqSelect
+ TCO IRQ Select. The valid value is 9, 10, 11, 20, 21, 22, 23.
+**/
+ UINT8 TcoIrqSelect;
+
+/** Offset 0x008B - Enable/Disable Tco IRQ
+ Enable/disable TCO IRQ
+ $EN_DIS
+**/
+ UINT8 TcoIrqEnable;
+
+/** Offset 0x008C - PCH HDA Verb Table Entry Number
+ Number of Entries in Verb Table.
+**/
+ UINT8 PchHdaVerbTableEntryNum;
+
+/** Offset 0x008D - PCH HDA Verb Table Pointer
+ Pointer to Array of pointers to Verb Table.
+**/
+ UINT32 PchHdaVerbTablePtr;
+
+/** Offset 0x0091 - PCH HDA Codec Sx Wake Capability
+ Capability to detect wake initiated by a codec in Sx
+**/
+ UINT8 PchHdaCodecSxWakeCapability;
+
+/** Offset 0x0092 - Enable SATA
+ Enable/disable SATA controller.
+ $EN_DIS
+**/
+ UINT8 SataEnable;
+
+/** Offset 0x0093 - SATA Mode
+ Select SATA controller working mode.
+ 0:AHCI, 1:RAID
+**/
+ UINT8 SataMode;
+
+/** Offset 0x0094 - USB Per Port HS Preemphasis Bias
+ USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV. One byte for each port.
+**/
+ UINT8 Usb2AfePetxiset[16];
+
+/** Offset 0x00A4 - USB Per Port HS Transmitter Bias
+ USB Per Port HS Transmitter Bias. 000b-0mV, 001b-11.25mV, 010b-16.9mV, 011b-28.15mV,
+ 100b-28.15mV, 101b-39.35mV, 110b-45mV, 111b-56.3mV, One byte for each port.
+**/
+ UINT8 Usb2AfeTxiset[16];
+
+/** Offset 0x00B4 - USB Per Port HS Transmitter Emphasis
+ USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
+ 10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
+**/
+ UINT8 Usb2AfePredeemp[16];
+
+/** Offset 0x00C4 - USB Per Port Half Bit Pre-emphasis
+ USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
+ One byte for each port.
+**/
+ UINT8 Usb2AfePehalfbit[16];
+
+/** Offset 0x00D4 - Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment
+ Enable the write to USB 3.0 TX Output -3.5dB De-Emphasis Adjustment. Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmphEnable[10];
+
+/** Offset 0x00DE - USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting
+ USB 3.0 TX Output -3.5dB De-Emphasis Adjustment Setting, HSIO_TX_DWORD5[21:16],
+ <b>Default = 29h</b> (approximately -3.5dB De-Emphasis). One byte for each port.
+**/
+ UINT8 Usb3HsioTxDeEmph[10];
+
+/** Offset 0x00E8 - Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment
+ Enable the write to USB 3.0 TX Output Downscale Amplitude Adjustment, Each value
+ in arrary can be between 0-1. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmpEnable[10];
+
+/** Offset 0x00F2 - USB 3.0 TX Output Downscale Amplitude Adjustment
+ USB 3.0 TX Output Downscale Amplitude Adjustment, HSIO_TX_DWORD8[21:16], <b>Default
+ = 00h</b>. One byte for each port.
+**/
+ UINT8 Usb3HsioTxDownscaleAmp[10];
+
+/** Offset 0x00FC - Enable LAN
+ Enable/disable LAN controller.
+ $EN_DIS
+**/
+ UINT8 PchLanEnable;
+
+/** Offset 0x00FD - Enable HD Audio Link
+ Enable/disable HD Audio Link. Muxed with SSP0/SSP1/SNDW1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkHda;
+
+/** Offset 0x00FE - Enable HD Audio DMIC0 Link
+ Enable/disable HD Audio DMIC0 link. Muxed with SNDW4.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic0;
+
+/** Offset 0x00FF - Enable HD Audio DMIC1 Link
+ Enable/disable HD Audio DMIC1 link. Muxed with SNDW3.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkDmic1;
+
+/** Offset 0x0100 - Enable HD Audio SSP0 Link
+ Enable/disable HD Audio SSP0/I2S link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp0;
+
+/** Offset 0x0101 - Enable HD Audio SSP1 Link
+ Enable/disable HD Audio SSP1/I2S link. Muxed with HDA/SNDW2.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp1;
+
+/** Offset 0x0102 - Enable HD Audio SSP2 Link
+ Enable/disable HD Audio SSP2/I2S link.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSsp2;
+
+/** Offset 0x0103 - Enable HD Audio SoundWire#1 Link
+ Enable/disable HD Audio SNDW1 link. Muxed with HDA.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw1;
+
+/** Offset 0x0104 - Enable HD Audio SoundWire#2 Link
+ Enable/disable HD Audio SNDW2 link. Muxed with SSP1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw2;
+
+/** Offset 0x0105 - Enable HD Audio SoundWire#3 Link
+ Enable/disable HD Audio SNDW3 link. Muxed with DMIC1.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw3;
+
+/** Offset 0x0106 - Enable HD Audio SoundWire#4 Link
+ Enable/disable HD Audio SNDW4 link. Muxed with DMIC0.
+ $EN_DIS
+**/
+ UINT8 PchHdaAudioLinkSndw4;
+
+/** Offset 0x0107 - Soundwire Clock Buffer GPIO RCOMP Setting
+ 0: non-ACT - 50 Ohm driver impedance, 1: ACT - 8 Ohm driver impedance.
+ $EN_DIS
+**/
+ UINT8 PchHdaSndwBufferRcomp;
+
+/** Offset 0x0108 - PTM for PCIE RP Mask
+ Enable/disable Precision Time Measurement for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpPtmMask;
+
+/** Offset 0x010C - DPC for PCIE RP Mask
+ Enable/disable Downstream Port Containment for PCIE Root Ports. 0: disable, 1: enable.
+ One bit for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcMask;
+
+/** Offset 0x0110 - DPC Extensions PCIE RP Mask
+ Enable/disable DPC Extensions for PCIE Root Ports. 0: disable, 1: enable. One bit
+ for each port, bit0 for port1, bit1 for port2, and so on.
+**/
+ UINT32 PcieRpDpcExtensionsMask;
+
+/** Offset 0x0114 - USB PDO Programming
+ Enable/disable PDO programming for USB in PEI phase. Disabling will allow for programming
+ during later phase. 1: enable, 0: disable
+ $EN_DIS
+**/
+ UINT8 UsbPdoProgramming;
+
+/** Offset 0x0115 - Power button debounce configuration
+ Debounce time for PWRBTN in microseconds. For values not supported by HW, they will
+ be rounded down to closest supported on. 0: disable, 250-1024000us: supported range
+**/
+ UINT32 PmcPowerButtonDebounce;
+
+/** Offset 0x0119 - PCH eSPI Master and Slave BME enabled
+ PCH eSPI Master and Slave BME enabled
+ $EN_DIS
+**/
+ UINT8 PchEspiBmeMasterSlaveEnabled;
+
+/** Offset 0x011A - PCH SATA use RST Legacy OROM
+ Use PCH SATA RST Legacy OROM when CSM is Enabled
+ $EN_DIS
+**/
+ UINT8 SataRstLegacyOrom;
+
+/** Offset 0x011B - Trace Hub Memory Base
+ If Trace Hub is enabled and trace to memory is desired, BootLoader needs to allocate
+ trace hub memory as reserved and uncacheable, set the base to ensure Trace Hub
+ memory is configured properly.
+**/
+ UINT32 TraceHubMemBase;
+
+/** Offset 0x011F - PMC Debug Message Enable
+ When Enabled, PMC HW will send debug messages to trace hub; When Disabled, PMC HW
+ will never send debug meesages to trace hub. Noted: When Enabled, may not enter S0ix
+ $EN_DIS
+**/
+ UINT8 PmcDbgMsgEn;
+
+/** Offset 0x0120 - Pointer of ChipsetInit Binary
+ ChipsetInit Binary Pointer.
+**/
+ UINT32 ChipsetInitBinPtr;
+
+/** Offset 0x0124 - Length of ChipsetInit Binary
+ ChipsetInit Binary Length.
+**/
+ UINT32 ChipsetInitBinLen;
+
+/** Offset 0x0128 - PchPostMemRsvd
+ Reserved for PCH Post-Mem
+ $EN_DIS
+**/
+ UINT8 PchPostMemRsvd[29];
+
+/** Offset 0x0145 - Enable Ufs Controller
+ Enable/disable Ufs 2.0 Controller.
+ $EN_DIS
+**/
+ UINT8 ScsUfsEnabled;
+
+/** Offset 0x0146 - CNVi Configuration
+ This option allows for automatic detection of Connectivity Solution. [Auto Detection]
+ assumes that CNVi will be enabled when available, [Disable] allows for disabling CNVi.
+ 0:Disable, 1:Auto
+**/
+ UINT8 PchCnviMode;
+
+/** Offset 0x0147 - SdCard power enable polarity
+ Choose SD_PWREN# polarity
+ 0: Active low, 1: Active high
+**/
+ UINT8 SdCardPowerEnableActiveHigh;
+
+/** Offset 0x0148 - PCH USB2 PHY Power Gating enable
+ 1: Will enable USB2 PHY SUS Well Power Gating, 0: Will not enable PG of USB2 PHY
+ Sus Well PG
+ $EN_DIS
+**/
+ UINT8 PchUsb2PhySusPgEnable;
+
+/** Offset 0x0149 - PCH USB OverCurrent mapping enable
+ 1: Will program USB OC pin mapping in xHCI controller memory, 0: Will clear OC pin
+ mapping allow for NOA usage of OC pins
+ $EN_DIS
+**/
+ UINT8 PchUsbOverCurrentEnable;
+
+/** Offset 0x014A
+**/
+ UINT8 UnusedUpdSpace3;
+
+/** Offset 0x014B - CNVi MfUart1 Type
+ This option configures Uart type which connects to MfUart1
+ 0:ISH Uart0, 1:SerialIO Uart2, 2:Uart over external pads
+**/
+ UINT8 PchCnviMfUart1Type;
+
+/** Offset 0x014C - Espi Lgmr Memory Range decode
+ This option enables or disables espi lgmr
+ $EN_DIS
+**/
+ UINT8 PchEspiLgmrEnable;
+
+/** Offset 0x014D - HECI3 state
+ The HECI3 state from Mbp for reference in S3 path or when MbpHob is not installed.
+ 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 Heci3Enabled;
+
+/** Offset 0x014E
+**/
+ UINT8 UnusedUpdSpace4;
+
+/** Offset 0x014F - PCHHOT# pin
+ Enable PCHHOT# pin assertion when temperature is higher than PchHotLevel. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchHotEnable;
+
+/** Offset 0x0150 - SATA LED
+ SATA LED indicating SATA controller activity. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SataLedEnable;
+
+/** Offset 0x0151 - VRAlert# Pin
+ When VRAlert# feature pin is enabled and its state is '0', the PMC requests throttling
+ to a T3 Tstate to the PCH throttling unit.. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmVrAlert;
+
+/** Offset 0x0152 - SLP_S0 VM Dynamic Control
+ SLP_S0 Voltage Margining Runtime Control Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0VmRuntimeControl;
+
+/** Offset 0x0153 - SLP_S0 VM 0.70V Support
+ SLP_S0 Voltage Margining 0.70V Support Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Vm070VSupport;
+
+/** Offset 0x0154 - SLP_S0 VM 0.75V Support
+ SLP_S0 Voltage Margining 0.75V Support Policy. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Vm075VSupport;
+
+/** Offset 0x0155 - AMT Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable AMT functionality.
+ $EN_DIS
+**/
+ UINT8 AmtEnabled;
+
+/** Offset 0x0156 - WatchDog Timer Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable WatchDog timer.
+ $EN_DIS
+**/
+ UINT8 WatchDog;
+
+/** Offset 0x0157 - ASF Switch
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable ASF functionality.
+ $EN_DIS
+**/
+ UINT8 AsfEnabled;
+
+/** Offset 0x0158 - Manageability Mode set by Mebx
+ Enable/Disable. 0: Disable, 1: enable, Enable or disable Manageability Mode.
+ $EN_DIS
+**/
+ UINT8 ManageabilityMode;
+
+/** Offset 0x0159 - PET Progress
+ Enable/Disable. 0: Disable, 1: enable, Enable/Disable PET Events Progress to receive
+ PET Events.
+ $EN_DIS
+**/
+ UINT8 FwProgress;
+
+/** Offset 0x015A - SOL Switch
+ Enable/Disable. 0: Disable, 1: enable, Serial Over Lan enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtSolEnabled;
+
+/** Offset 0x015B - OS Timer
+ 16 bits Value, Set OS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerOs;
+
+/** Offset 0x015D - BIOS Timer
+ 16 bits Value, Set BIOS watchdog timer.
+ $EN_DIS
+**/
+ UINT16 WatchDogTimerBios;
+
+/** Offset 0x015F - Remote Assistance Trigger Availablilty
+ Enable/Disable. 0: Disable, 1: enable, Remote Assistance enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 RemoteAssistance;
+
+/** Offset 0x0160 - KVM Switch
+ Enable/Disable. 0: Disable, 1: enable, KVM enable/disable state by Mebx
+ $EN_DIS
+**/
+ UINT8 AmtKvmEnabled;
+
+/** Offset 0x0161 - MEBX execution
+ Enable/Disable. 0: Disable, 1: enable, Force MEBX execution
+ $EN_DIS
+**/
+ UINT8 ForcMebxSyncUp;
+
+/** Offset 0x0162
+**/
+ UINT8 UnusedUpdSpace5[1];
+
+/** Offset 0x0163 - PCH PCIe root port connection type
+ 0: built-in device, 1:slot
+**/
+ UINT8 PcieRpSlotImplemented[24];
+
+/** Offset 0x017B - Usage type for ClkSrc
+ 0-23: PCH rootport, 0x40-0x43: PEG port, 0x70:LAN, 0x80: unspecified but in use
+ (free running), 0xFF: not used
+**/
+ UINT8 PcieClkSrcUsage[16];
+
+/** Offset 0x018B - ClkReq-to-ClkSrc mapping
+ Number of ClkReq signal assigned to ClkSrc
+**/
+ UINT8 PcieClkSrcClkReq[16];
+
+/** Offset 0x019B - PCIE RP Access Control Services Extended Capability
+ Enable/Disable PCIE RP Access Control Services Extended Capability
+**/
+ UINT8 PcieRpAcsEnabled[24];
+
+/** Offset 0x01B3 - PCIE RP Clock Power Management
+ Enable/Disable PCIE RP Clock Power Management, even if disabled, CLKREQ# signal
+ can still be controlled by L1 PM substates mechanism
+**/
+ UINT8 PcieRpEnableCpm[24];
+
+/** Offset 0x01CB - PCIE RP Detect Timeout Ms
+ The number of milliseconds within 0~65535 in reference code will wait for link to
+ exit Detect state for enabled ports before assuming there is no device and potentially
+ disabling the port.
+**/
+ UINT16 PcieRpDetectTimeoutMs[24];
+
+/** Offset 0x01FB - ModPHY SUS Power Domain Dynamic Gating
+ Enable/Disable ModPHY SUS Power Domain Dynamic Gating. Setting not supported on
+ PCH-H. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 PmcModPhySusPgEnable;
+
+/** Offset 0x01FC - SlpS0WithGbeSupport
+ Enable/Disable SLP_S0 with GBE Support. 0: disable, 1: enable
+ $EN_DIS
+**/
+ UINT8 SlpS0WithGbeSupport;
+
+/** Offset 0x01FD
+**/
+ UINT8 UnusedUpdSpace6[3];
+
+/** Offset 0x0200 - Enable/Disable SA CRID
+ Enable: SA CRID, Disable (Default): SA CRID
+ $EN_DIS
+**/
+ UINT8 CridEnable;
+
+/** Offset 0x0201 - DMI ASPM
+ 0=Disable, 1:L0s, 2:L1, 3(Default)=L0sL1
+ 0:Disable, 1:L0s, 2:L1, 3:L0sL1
+**/
+ UINT8 DmiAspm;
+
+/** Offset 0x0202 - PCIe DeEmphasis control per root port
+ 0: -6dB, 1(Default): -3.5dB
+ 0:-6dB, 1:-3.5dB
+**/
+ UINT8 PegDeEmphasis[4];
+
+/** Offset 0x0206 - PCIe Slot Power Limit value per root port
+ Slot power limit value per root port
+**/
+ UINT8 PegSlotPowerLimitValue[4];
+
+/** Offset 0x020A - PCIe Slot Power Limit scale per root port
+ Slot power limit scale per root port
+ 0:1.0x, 1:0.1x, 2:0.01x, 3:0x001x
+**/
+ UINT8 PegSlotPowerLimitScale[4];
+
+/** Offset 0x020E - PCIe Physical Slot Number per root port
+ Physical Slot Number per root port
+**/
+ UINT16 PegPhysicalSlotNumber[4];
+
+/** Offset 0x0216 - Enable/Disable PavpEnable
+ Enable(Default): Enable PavpEnable, Disable: Disable PavpEnable
+ $EN_DIS
+**/
+ UINT8 PavpEnable;
+
+/** Offset 0x0217 - CdClock Frequency selection
+ 0=337.5 Mhz, 1=450 Mhz, 2=540 Mhz, 3(Default)=675 Mhz
+ 0: 337.5 Mhz, 1: 450 Mhz, 2: 540 Mhz, 3: 675 Mhz
+**/
+ UINT8 CdClock;
+
+/** Offset 0x0218 - Enable/Disable PeiGraphicsPeimInit
+ Enable: Enable PeiGraphicsPeimInit, Disable(Default): Disable PeiGraphicsPeimInit
+ $EN_DIS
+**/
+ UINT8 PeiGraphicsPeimInit;
+
+/** Offset 0x0219
+**/
+ UINT8 UnusedUpdSpace7;
+
+/** Offset 0x021A - Enable or disable GNA device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 GnaEnable;
+
+/** Offset 0x021B - State of X2APIC_OPT_OUT bit in the DMAR table
+ 0=Disable/Clear, 1=Enable/Set
+ $EN_DIS
+**/
+ UINT8 X2ApicOptOut;
+
+/** Offset 0x021C - Base addresses for VT-d function MMIO access
+ Base addresses for VT-d MMIO access per VT-d engine
+**/
+ UINT32 VtdBaseAddress[3];
+
+/** Offset 0x0228 - Enable or disable eDP device
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortEdp;
+
+/** Offset 0x0229 - Enable or disable HPD of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBHpd;
+
+/** Offset 0x022A - Enable or disable HPD of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCHpd;
+
+/** Offset 0x022B - Enable or disable HPD of DDI port D
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortDHpd;
+
+/** Offset 0x022C - Enable or disable HPD of DDI port F
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortFHpd;
+
+/** Offset 0x022D - Enable or disable DDC of DDI port B
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortBDdc;
+
+/** Offset 0x022E - Enable or disable DDC of DDI port C
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortCDdc;
+
+/** Offset 0x022F - Enable or disable DDC of DDI port D
+ 0=Disable, 1(Default)=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortDDdc;
+
+/** Offset 0x0230 - Enable or disable DDC of DDI port F
+ 0(Default)=Disable, 1=Enable
+ $EN_DIS
+**/
+ UINT8 DdiPortFDdc;
+
+/** Offset 0x0231 - Enable/Disable SkipS3CdClockInit
+ Enable: Skip Full CD clock initializaton, Disable(Default): Initialize the full
+ CD clock in S3 resume due to GOP absent
+ $EN_DIS
+**/
+ UINT8 SkipS3CdClockInit;
+
+/** Offset 0x0232 - Delta T12 Power Cycle Delay required in ms
+ Select the value for delay required. 0(Default)= No delay, 0xFFFF = Auto calculate
+ T12 Delay to max 500ms
+ 0 : No Delay, 0xFFFF : Auto Calulate T12 Delay
+**/
+ UINT16 DeltaT12PowerCycleDelay;
+
+/** Offset 0x0234 - Blt Buffer Address
+ Address of Blt buffer
+**/
+ UINT32 BltBufferAddress;
+
+/** Offset 0x0238 - Blt Buffer Size
+ Size of Blt Buffer, is equal to PixelWidth * PixelHeight * 4 bytes (the size of
+ EFI_GRAPHICS_OUTPUT_BLT_PIXEL)
+**/
+ UINT32 BltBufferSize;
+
+/** Offset 0x023C - SaPostMemProductionRsvd
+ Reserved for SA Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 SaPostMemProductionRsvd[35];
+
+/** Offset 0x025F - PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable
+ PCIE RP Disable Gen2PLL Shutdown and L1 Clock Gating Enable Workaround needed for
+ Alpine ridge
+**/
+ UINT8 PcieRootPortGen2PllL1CgDisable[24];
+
+/** Offset 0x0277 - Advanced Encryption Standard (AES) feature
+ Enable or Disable Advanced Encryption Standard (AES) feature; </b>0: Disable; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 AesEnable;
+
+/** Offset 0x0278 - Power State 3 enable/disable
+ PCODE MMIO Mailbox: Power State 3 enable/disable; 0: Disable; <b>1: Enable</b>.
+ For all VR Indexes
+**/
+ UINT8 Psi3Enable[5];
+
+/** Offset 0x027D - Power State 4 enable/disable
+ PCODE MMIO Mailbox: Power State 4 enable/disable; 0: Disable; <b>1: Enable</b>.For
+ all VR Indexes
+**/
+ UINT8 Psi4Enable[5];
+
+/** Offset 0x0282 - Imon slope correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT8 ImonSlope[5];
+
+/** Offset 0x0287 - Imon offset correction
+ PCODE MMIO Mailbox: Imon offset correction. Value is a 2's complement signed integer.
+ Units 1/1000, Range 0-63999. For an offset = 12.580, use 12580. <b>0: Auto</b>
+**/
+ UINT8 ImonOffset[5];
+
+/** Offset 0x028C - Enable/Disable BIOS configuration of VR
+ Enable/Disable BIOS configuration of VR; <b>0: Disable</b>; 1: Enable.For all VR Indexes
+**/
+ UINT8 VrConfigEnable[5];
+
+/** Offset 0x0291 - Thermal Design Current enable/disable
+ PCODE MMIO Mailbox: Thermal Design Current enable/disable; <b>0: Disable</b>; 1:
+ Enable.For all VR Indexes
+**/
+ UINT8 TdcEnable[5];
+
+/** Offset 0x0296 - HECI3 state
+ PCODE MMIO Mailbox: Thermal Design Current time window. Defined in milli seconds.
+ Valid Values 1 - 1ms , 2 - 2ms , 3 - 3ms , 4 - 4ms , 5 - 5ms , 6 - 6ms , 7 - 7ms
+ , 8 - 8ms , 10 - 10ms.For all VR Indexe
+**/
+ UINT8 TdcTimeWindow[5];
+
+/** Offset 0x029B - Thermal Design Current Lock
+ PCODE MMIO Mailbox: Thermal Design Current Lock; <b>0: Disable</b>; 1: Enable.For
+ all VR Indexes
+**/
+ UINT8 TdcLock[5];
+
+/** Offset 0x02A0 - Platform Psys slope correction
+ PCODE MMIO Mailbox: Platform Psys slope correction. <b>0 - Auto</b> Specified in
+ 1/100 increment values. Range is 0-200. 125 = 1.25
+**/
+ UINT8 PsysSlope;
+
+/** Offset 0x02A1 - Platform Psys offset correction
+ PCODE MMIO Mailbox: Platform Psys offset correction. <b>0 - Auto</b> Units 1/4,
+ Range 0-255. Value of 100 = 100/4 = 25 offset
+**/
+ UINT8 PsysOffset;
+
+/** Offset 0x02A2 - Acoustic Noise Mitigation feature
+ Enable or Disable Acoustic Noise Mitigation feature. This has to be enabled to program
+ slew rate configuration for all VR domains, Pre Wake, Ramp Up and, Ramp Down times.<b>0:
+ Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 AcousticNoiseMitigation;
+
+/** Offset 0x02A3 - Disable Fast Slew Rate for Deep Package C States for VR IA domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableIa;
+
+/** Offset 0x02A4 - Slew Rate configuration for Deep Package C States for VR IA domain
+ Slew Rate configuration for Deep Package C States for VR IA domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForIa;
+
+/** Offset 0x02A5 - Slew Rate configuration for Deep Package C States for VR GT domain
+ Slew Rate configuration for Deep Package C States for VR GT domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForGt;
+
+/** Offset 0x02A6 - Slew Rate configuration for Deep Package C States for VR SA domain
+ Slew Rate configuration for Deep Package C States for VR SA domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForSa;
+
+/** Offset 0x02A7 - Thermal Design Current current limit
+ PCODE MMIO Mailbox: Thermal Design Current current limit. Specified in 1/8A units.
+ Range is 0-4095. 1000 = 125A. <b>0: Auto</b>. For all VR Indexes
+**/
+ UINT16 TdcPowerLimit[5];
+
+/** Offset 0x02B1 - AcLoadline
+ PCODE MMIO Mailbox: AcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249. <b>Intel Recommended Defaults vary by domain and SKU.
+**/
+ UINT16 AcLoadline[5];
+
+/** Offset 0x02BB
+**/
+ UINT8 UnusedUpdSpace8[10];
+
+/** Offset 0x02C5 - DcLoadline
+ PCODE MMIO Mailbox: DcLoadline in 1/100 mOhms (ie. 1250 = 12.50 mOhm); Range is
+ 0-6249.<b>Intel Recommended Defaults vary by domain and SKU.</b>
+**/
+ UINT16 DcLoadline[5];
+
+/** Offset 0x02CF - Power State 1 Threshold current
+ PCODE MMIO Mailbox: Power State 1 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi1Threshold[5];
+
+/** Offset 0x02D9 - Power State 2 Threshold current
+ PCODE MMIO Mailbox: Power State 2 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi2Threshold[5];
+
+/** Offset 0x02E3 - Power State 3 Threshold current
+ PCODE MMIO Mailbox: Power State 3 current cuttof in 1/4 Amp increments. Range is 0-128A.
+**/
+ UINT16 Psi3Threshold[5];
+
+/** Offset 0x02ED - Icc Max limit
+ PCODE MMIO Mailbox: VR Icc Max limit. 0-255A in 1/4 A units. 400 = 100A
+**/
+ UINT16 IccMax[5];
+
+/** Offset 0x02F7 - VR Voltage Limit
+ PCODE MMIO Mailbox: VR Voltage Limit. Range is 0-7999mV.
+**/
+ UINT16 VrVoltageLimit[5];
+
+/** Offset 0x0301 - Disable Fast Slew Rate for Deep Package C States for VR GT domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableGt;
+
+/** Offset 0x0302 - Disable Fast Slew Rate for Deep Package C States for VR SA domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableSa;
+
+/** Offset 0x0303 - Enable VR specific mailbox command
+ VR specific mailbox commands. <b>00b - no VR specific command sent.</b> 01b - A
+ VR mailbox command specifically for the MPS IMPV8 VR will be sent. 10b - VR specific
+ command sent for PS4 exit issue. 11b - Reserved.
+ $EN_DIS
+**/
+ UINT8 SendVrMbxCmd;
+
+/** Offset 0x0304 - Reserved
+ Reserved
+**/
+ UINT8 Reserved2;
+
+/** Offset 0x0305 - Enable or Disable TXT
+ Enable or Disable TXT; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 TxtEnable;
+
+/** Offset 0x0306
+**/
+ UINT8 UnusedUpdSpace9[6];
+
+/** Offset 0x030C - Deprecated DO NOT USE Skip Multi-Processor Initialization
+ @deprecated SkipMpInit has been moved to FspmUpd
+ $EN_DIS
+**/
+ UINT8 SkipMpInit;
+
+/** Offset 0x030D - McIVR RFI Frequency Prefix
+ PCODE MMIO Mailbox: McIVR RFI Frequency Adjustment Prefix. <b>0: Plus (+)</b>; 1:
+ Minus (-).
+**/
+ UINT8 McivrRfiFrequencyPrefix;
+
+/** Offset 0x030E - McIVR RFI Frequency Adjustment
+ PCODE MMIO Mailbox: Adjust the RFI frequency relative to the nominal frequency in
+ increments of 100KHz. For subtraction, change McivrRfiFrequencyPrefix. <b>0: Auto</b>.
+**/
+ UINT8 McivrRfiFrequencyAdjust;
+
+/** Offset 0x030F - FIVR RFI Frequency
+ PCODE MMIO Mailbox: Set the desired RFI frequency, in increments of 100KHz. <b>0:
+ Auto</b>. Range varies based on XTAL clock: 0-1918 (Up to 191.8HMz) for 24MHz clock;
+ 0-1535 (Up to 153.5MHz) for 19MHz clock.
+**/
+ UINT16 FivrRfiFrequency;
+
+/** Offset 0x0311 - McIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: McIVR RFI Spread Spectrum. <b>0: 0%</b>; 1: +/- 0.5%; 2: +/-
+ 1%; 3: +/- 1.5%; 4: +/- 2%; 5: +/- 3%; 6: +/- 4%; 7: +/- 5%; 8: +/- 6%.
+**/
+ UINT8 McivrSpreadSpectrum;
+
+/** Offset 0x0312 - FIVR RFI Spread Spectrum
+ PCODE MMIO Mailbox: FIVR RFI Spread Spectrum, in 0.1% increments. <b>0: 0%</b>;
+ Range: 0.0% to 10.0% (0-100).
+**/
+ UINT8 FivrSpreadSpectrum;
+
+/** Offset 0x0313 - Disable Fast Slew Rate for Deep Package C States for VR FIVR domain
+ Disable Fast Slew Rate for Deep Package C States based on Acoustic Noise Mitigation
+ feature enabled. <b>0: False</b>; 1: True
+ $EN_DIS
+**/
+ UINT8 FastPkgCRampDisableFivr;
+
+/** Offset 0x0314 - Slew Rate configuration for Deep Package C States for VR FIVR domain
+ Slew Rate configuration for Deep Package C States for VR FIVR domain based on Acoustic
+ Noise Mitigation feature enabled. <b>0: Fast/2</b>; 1: Fast/4; 2: Fast/8; 3: Fast/16
+ 0: Fast/2, 1: Fast/4, 2: Fast/8, 3: Fast/16
+**/
+ UINT8 SlowSlewRateForFivr;
+
+/** Offset 0x0315 - CpuBistData
+ Pointer CPU BIST Data
+**/
+ UINT32 CpuBistData;
+
+/** Offset 0x0319 - Activates VR mailbox command for Intersil VR C-state issues.
+ Intersil VR mailbox command. <b>0 - no mailbox command sent.</b> 1 - VR mailbox
+ command sent for IA/GT rails only. 2 - VR mailbox command sent for IA/GT/SA rails.
+**/
+ UINT8 IslVrCmd;
+
+/** Offset 0x031A - Imon slope1 correction
+ PCODE MMIO Mailbox: Imon slope correction. Specified in 1/100 increment values.
+ Range is 0-200. 125 = 1.25. <b>0: Auto</b>.For all VR Indexes
+**/
+ UINT16 ImonSlope1[5];
+
+/** Offset 0x0324 - CPU VR Power Delivery Design
+ Used to communicate the power delivery design capability of the board. This value
+ is an enum of the available power delivery segments that are defined in the Platform
+ Design Guide.
+**/
+ UINT32 VrPowerDeliveryDesign;
+
+/** Offset 0x0328 - Pre Wake Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum pre-wake randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.
+ Range 0-255 <b>0</b>.
+**/
+ UINT8 PreWake;
+
+/** Offset 0x0329 - Ramp Up Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Up randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampUp;
+
+/** Offset 0x032A - Ramp Down Randomization time
+ PCODE MMIO Mailbox: Acoustic Migitation Range.Defines the maximum Ramp Down randomization
+ time in micro ticks.This can be programmed only if AcousticNoiseMigitation is enabled.Range
+ 0-255 <b>0</b>.
+**/
+ UINT8 RampDown;
+
+/** Offset 0x032B - CpuMpPpi
+ Pointer for CpuMpPpi
+**/
+ UINT32 CpuMpPpi;
+
+/** Offset 0x032F - CpuMpHob
+ Pointer for CpuMpHob. This is optional data buffer for CpuMpPpi usage.
+**/
+ UINT32 CpuMpHob;
+
+/** Offset 0x0333 - Enable or Disable processor debug features
+ Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x0334 - ReservedCpuPostMemProduction
+ Reserved for CPU Post-Mem Production
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemProduction[18];
+
+/** Offset 0x0346 - Enable DMI ASPM
+ Deprecated.
+ $EN_DIS
+**/
+ UINT8 PchDmiAspm;
+
+/** Offset 0x0347 - Enable Power Optimizer
+ Enable DMI Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 PchPwrOptEnable;
+
+/** Offset 0x0348 - PCH Flash Protection Ranges Write Enble
+ Write or erase is blocked by hardware.
+**/
+ UINT8 PchWriteProtectionEnable[5];
+
+/** Offset 0x034D - PCH Flash Protection Ranges Read Enble
+ Read is blocked by hardware.
+**/
+ UINT8 PchReadProtectionEnable[5];
+
+/** Offset 0x0352 - PCH Protect Range Limit
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be FFFh for
+ limit comparison.
+**/
+ UINT16 PchProtectedRangeLimit[5];
+
+/** Offset 0x035C - PCH Protect Range Base
+ Left shifted address by 12 bits with address bits 11:0 are assumed to be 0.
+**/
+ UINT16 PchProtectedRangeBase[5];
+
+/** Offset 0x0366 - Enable Pme
+ Enable Azalia wake-on-ring.
+ $EN_DIS
+**/
+ UINT8 PchHdaPme;
+
+/** Offset 0x0367
+**/
+ UINT8 UnusedUpdSpace10;
+
+/** Offset 0x0368 - VC Type
+ Virtual Channel Type Select: 0: VC0, 1: VC1.
+ 0: VC0, 1: VC1
+**/
+ UINT8 PchHdaVcType;
+
+/** Offset 0x0369 - HD Audio Link Frequency
+ HDA Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 0: 6MHz, 1: 12MHz, 2: 24MHz.
+ 0: 6MHz, 1: 12MHz, 2: 24MHz
+**/
+ UINT8 PchHdaLinkFrequency;
+
+/** Offset 0x036A - iDisp-Link Frequency
+ iDisp-Link Freq (PCH_HDAUDIO_LINK_FREQUENCY enum): 4: 96MHz, 3: 48MHz.
+ 4: 96MHz, 3: 48MHz
+**/
+ UINT8 PchHdaIDispLinkFrequency;
+
+/** Offset 0x036B - iDisp-Link T-mode
+ iDisp-Link T-Mode (PCH_HDAUDIO_IDISP_TMODE enum): 0: 2T, 1: 1T.
+ 0: 2T, 1: 1T
+**/
+ UINT8 PchHdaIDispLinkTmode;
+
+/** Offset 0x036C - Universal Audio Architecture compliance for DSP enabled system
+ 0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
+ driver or SST driver supported).
+ $EN_DIS
+**/
+ UINT8 PchHdaDspUaaCompliance;
+
+/** Offset 0x036D - iDisplay Audio Codec disconnection
+ 0: Not disconnected, enumerable, 1: Disconnected SDI, not enumerable.
+ $EN_DIS
+**/
+ UINT8 PchHdaIDispCodecDisconnect;
+
+/** Offset 0x036E - USB LFPS Filter selection
+ For each byte bits 2:0 are for p, bits 4:6 are for n. 0h:1.6ns, 1h:2.4ns, 2h:3.2ns,
+ 3h:4.0ns, 4h:4.8ns, 5h:5.6ns, 6h:6.4ns.
+**/
+ UINT8 PchUsbHsioFilterSel[10];
+
+/** Offset 0x0378
+**/
+ UINT8 UnusedUpdSpace11[5];
+
+/** Offset 0x037D - Enable PCH Io Apic Entry 24-119
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIoApicEntry24_119;
+
+/** Offset 0x037E - PCH Io Apic ID
+ This member determines IOAPIC ID. Default is 0x02.
+**/
+ UINT8 PchIoApicId;
+
+/** Offset 0x037F
+**/
+ UINT8 UnusedUpdSpace12;
+
+/** Offset 0x0380 - Enable PCH ISH SPI GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshSpiGpioAssign;
+
+/** Offset 0x0381 - Enable PCH ISH UART0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart0GpioAssign;
+
+/** Offset 0x0382 - Enable PCH ISH UART1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshUart1GpioAssign;
+
+/** Offset 0x0383 - Enable PCH ISH I2C0 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c0GpioAssign;
+
+/** Offset 0x0384 - Enable PCH ISH I2C1 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c1GpioAssign;
+
+/** Offset 0x0385 - Enable PCH ISH I2C2 GPIO pins assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshI2c2GpioAssign;
+
+/** Offset 0x0386 - Enable PCH ISH GP_0 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp0GpioAssign;
+
+/** Offset 0x0387 - Enable PCH ISH GP_1 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp1GpioAssign;
+
+/** Offset 0x0388 - Enable PCH ISH GP_2 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp2GpioAssign;
+
+/** Offset 0x0389 - Enable PCH ISH GP_3 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp3GpioAssign;
+
+/** Offset 0x038A - Enable PCH ISH GP_4 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp4GpioAssign;
+
+/** Offset 0x038B - Enable PCH ISH GP_5 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp5GpioAssign;
+
+/** Offset 0x038C - Enable PCH ISH GP_6 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp6GpioAssign;
+
+/** Offset 0x038D - Enable PCH ISH GP_7 GPIO pin assigned
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchIshGp7GpioAssign;
+
+/** Offset 0x038E - PCH ISH PDT Unlock Msg
+ 0: False; 1: True.
+ $EN_DIS
+**/
+ UINT8 PchIshPdtUnlock;
+
+/** Offset 0x038F - Enable PCH Lan LTR capabilty of PCH internal LAN
+ 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PchLanLtrEnable;
+
+/** Offset 0x0390
+**/
+ UINT8 UnusedUpdSpace13[3];
+
+/** Offset 0x0393 - Enable LOCKDOWN BIOS LOCK
+ Enable the BIOS Lock feature and set EISS bit (D31:F5:RegDCh[5]) for the BIOS region
+ protection.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosLock;
+
+/** Offset 0x0394 - PCH Compatibility Revision ID
+ This member describes whether or not the CRID feature of PCH should be enabled.
+ $EN_DIS
+**/
+ UINT8 PchCrid;
+
+/** Offset 0x0395 - RTC CMOS MEMORY LOCK
+ Enable RTC lower and upper 128 byte Lock bits to lock Bytes 38h-3Fh in the upper
+ and and lower 128-byte bank of RTC RAM.
+ $EN_DIS
+**/
+ UINT8 PchLockDownRtcMemoryLock;
+
+/** Offset 0x0396 - Enable PCIE RP HotPlug
+ Indicate whether the root port is hot plug available.
+**/
+ UINT8 PcieRpHotPlug[24];
+
+/** Offset 0x03AE - Enable PCIE RP Pm Sci
+ Indicate whether the root port power manager SCI is enabled.
+**/
+ UINT8 PcieRpPmSci[24];
+
+/** Offset 0x03C6 - Enable PCIE RP Ext Sync
+ Indicate whether the extended synch is enabled.
+**/
+ UINT8 PcieRpExtSync[24];
+
+/** Offset 0x03DE - Enable PCIE RP Transmitter Half Swing
+ Indicate whether the Transmitter Half Swing is enabled.
+**/
+ UINT8 PcieRpTransmitterHalfSwing[24];
+
+/** Offset 0x03F6 - Enable PCIE RP Clk Req Detect
+ Probe CLKREQ# signal before enabling CLKREQ# based power management.
+**/
+ UINT8 PcieRpClkReqDetect[24];
+
+/** Offset 0x040E - PCIE RP Advanced Error Report
+ Indicate whether the Advanced Error Reporting is enabled.
+**/
+ UINT8 PcieRpAdvancedErrorReporting[24];
+
+/** Offset 0x0426 - PCIE RP Unsupported Request Report
+ Indicate whether the Unsupported Request Report is enabled.
+**/
+ UINT8 PcieRpUnsupportedRequestReport[24];
+
+/** Offset 0x043E - PCIE RP Fatal Error Report
+ Indicate whether the Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpFatalErrorReport[24];
+
+/** Offset 0x0456 - PCIE RP No Fatal Error Report
+ Indicate whether the No Fatal Error Report is enabled.
+**/
+ UINT8 PcieRpNoFatalErrorReport[24];
+
+/** Offset 0x046E - PCIE RP Correctable Error Report
+ Indicate whether the Correctable Error Report is enabled.
+**/
+ UINT8 PcieRpCorrectableErrorReport[24];
+
+/** Offset 0x0486 - PCIE RP System Error On Fatal Error
+ Indicate whether the System Error on Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnFatalError[24];
+
+/** Offset 0x049E - PCIE RP System Error On Non Fatal Error
+ Indicate whether the System Error on Non Fatal Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnNonFatalError[24];
+
+/** Offset 0x04B6 - PCIE RP System Error On Correctable Error
+ Indicate whether the System Error on Correctable Error is enabled.
+**/
+ UINT8 PcieRpSystemErrorOnCorrectableError[24];
+
+/** Offset 0x04CE - PCIE RP Max Payload
+ Max Payload Size supported, Default 128B, see enum PCH_PCIE_MAX_PAYLOAD.
+**/
+ UINT8 PcieRpMaxPayload[24];
+
+/** Offset 0x04E6 - PCH USB3 RX HSIO Tuning parameters
+ Bits 7:3 are for Signed Magnatude number added to the CTLE code, Bits 2:0 are for
+ controlling the input offset
+**/
+ UINT8 PchUsbHsioRxTuningParameters[10];
+
+/** Offset 0x04F0 - PCH USB3 HSIO Rx Tuning Enable
+ Mask for enabling tuning of HSIO Rx signals of USB3 ports. Bits: 0 - HsioCtrlAdaptOffsetCfgEnable,
+ 1 - HsioFilterSelNEnable, 2 - HsioFilterSelPEnable, 3 - HsioOlfpsCfgPullUpDwnResEnable
+**/
+ UINT8 PchUsbHsioRxTuningEnable[10];
+
+/** Offset 0x04FA
+**/
+ UINT8 UnusedUpdSpace14[4];
+
+/** Offset 0x04FE - PCIE RP Pcie Speed
+ Determines each PCIE Port speed capability. 0: Auto; 1: Gen1; 2: Gen2; 3: Gen3 (see:
+ PCH_PCIE_SPEED).
+**/
+ UINT8 PcieRpPcieSpeed[24];
+
+/** Offset 0x0516 - PCIE RP Gen3 Equalization Phase Method
+ PCIe Gen3 Eq Ph3 Method (see PCH_PCIE_EQ_METHOD). 0: DEPRECATED, hardware equalization;
+ 1: hardware equalization; 4: Fixed Coeficients.
+**/
+ UINT8 PcieRpGen3EqPh3Method[24];
+
+/** Offset 0x052E - PCIE RP Physical Slot Number
+ Indicates the slot number for the root port. Default is the value as root port index.
+**/
+ UINT8 PcieRpPhysicalSlotNumber[24];
+
+/** Offset 0x0546 - PCIE RP Completion Timeout
+ The root port completion timeout(see: PCH_PCIE_COMPLETION_TIMEOUT). Default is PchPcieCompletionTO_Default.
+**/
+ UINT8 PcieRpCompletionTimeout[24];
+
+/** Offset 0x055E
+**/
+ UINT8 UnusedUpdSpace15[106];
+
+/** Offset 0x05C8 - PCIE RP Aspm
+ The ASPM configuration of the root port (see: PCH_PCIE_ASPM_CONTROL). Default is
+ PchPcieAspmAutoConfig.
+**/
+ UINT8 PcieRpAspm[24];
+
+/** Offset 0x05E0 - PCIE RP L1 Substates
+ The L1 Substates configuration of the root port (see: PCH_PCIE_L1SUBSTATES_CONTROL).
+ Default is PchPcieL1SubstatesL1_1_2.
+**/
+ UINT8 PcieRpL1Substates[24];
+
+/** Offset 0x05F8 - PCIE RP Ltr Enable
+ Latency Tolerance Reporting Mechanism.
+**/
+ UINT8 PcieRpLtrEnable[24];
+
+/** Offset 0x0610 - PCIE RP Ltr Config Lock
+ 0: Disable; 1: Enable.
+**/
+ UINT8 PcieRpLtrConfigLock[24];
+
+/** Offset 0x0628 - PCIE Eq Ph3 Lane Param Cm
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieEqPh3LaneParamCm[24];
+
+/** Offset 0x0640 - PCIE Eq Ph3 Lane Param Cp
+ PCH_PCIE_EQ_LANE_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieEqPh3LaneParamCp[24];
+
+/** Offset 0x0658 - PCIE Sw Eq CoeffList Cm
+ PCH_PCIE_EQ_PARAM. Coefficient C-1.
+**/
+ UINT8 PcieSwEqCoeffListCm[5];
+
+/** Offset 0x065D - PCIE Sw Eq CoeffList Cp
+ PCH_PCIE_EQ_PARAM. Coefficient C+1.
+**/
+ UINT8 PcieSwEqCoeffListCp[5];
+
+/** Offset 0x0662 - PCIE Disable RootPort Clock Gating
+ Describes whether the PCI Express Clock Gating for each root port is enabled by
+ platform modules. 0: Disable; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieDisableRootPortClockGating;
+
+/** Offset 0x0663 - PCIE Enable Peer Memory Write
+ This member describes whether Peer Memory Writes are enabled on the platform.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePeerMemoryWrite;
+
+/** Offset 0x0664
+**/
+ UINT8 UnusedUpdSpace16;
+
+/** Offset 0x0665 - PCIE Compliance Test Mode
+ Compliance Test Mode shall be enabled when using Compliance Load Board.
+ $EN_DIS
+**/
+ UINT8 PcieComplianceTestMode;
+
+/** Offset 0x0666 - PCIE Rp Function Swap
+ Allows BIOS to use root port function number swapping when root port of function
+ 0 is disabled.
+ $EN_DIS
+**/
+ UINT8 PcieRpFunctionSwap;
+
+/** Offset 0x0667 - Teton Glacier Support
+ Enables support for the Teton Glacier card.
+ $EN_DIS
+**/
+ UINT8 TetonGlacierSupport;
+
+/** Offset 0x0668 - Teton Glacier Cycle Router
+ Specify to which cycle router Teton Glacier is connected, it is valid only when
+ Teton Glacier support is enabled. Default is 0 for CNP-H system and 1 for CNP-LP system
+**/
+ UINT8 TetonGlacierCR;
+
+/** Offset 0x0669 - PCH Pm PME_B0_S5_DIS
+ When cleared (default), wake events from PME_B0_STS are allowed in S5 if PME_B0_EN = 1.
+ $EN_DIS
+**/
+ UINT8 PchPmPmeB0S5Dis;
+
+/** Offset 0x066A - SPI ChipSelect signal polarity
+ Selects SPI ChipSelect signal polarity.
+**/
+ UINT8 SerialIoSpiCsPolarity[3];
+
+/** Offset 0x066D - PCIE IMR
+ Enables Isolated Memory Region for PCIe.
+ $EN_DIS
+**/
+ UINT8 PcieRpImrEnabled;
+
+/** Offset 0x066E - PCIE IMR port number
+ Selects PCIE root port number for IMR feature.
+**/
+ UINT8 PcieRpImrSelection;
+
+/** Offset 0x066F
+**/
+ UINT8 UnusedUpdSpace17;
+
+/** Offset 0x0670 - PCH Pm Wol Enable Override
+ Corresponds to the WOL Enable Override bit in the General PM Configuration B (GEN_PMCON_B) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolEnableOverride;
+
+/** Offset 0x0671 - PCH Pm Pcie Wake From DeepSx
+ Determine if enable PCIe to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmPcieWakeFromDeepSx;
+
+/** Offset 0x0672 - PCH Pm WoW lan Enable
+ Determine if WLAN wake from Sx, corresponds to the HOST_WLAN_PP_EN bit in the PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanEnable;
+
+/** Offset 0x0673 - PCH Pm WoW lan DeepSx Enable
+ Determine if WLAN wake from DeepSx, corresponds to the DSX_WLAN_PP_EN bit in the
+ PWRM_CFG3 register.
+ $EN_DIS
+**/
+ UINT8 PchPmWoWlanDeepSxEnable;
+
+/** Offset 0x0674 - PCH Pm Lan Wake From DeepSx
+ Determine if enable LAN to wake from deep Sx.
+ $EN_DIS
+**/
+ UINT8 PchPmLanWakeFromDeepSx;
+
+/** Offset 0x0675 - PCH Pm Deep Sx Pol
+ Deep Sx Policy.
+ $EN_DIS
+**/
+ UINT8 PchPmDeepSxPol;
+
+/** Offset 0x0676 - PCH Pm Slp S3 Min Assert
+ SLP_S3 Minimum Assertion Width Policy. Default is PchSlpS350ms.
+**/
+ UINT8 PchPmSlpS3MinAssert;
+
+/** Offset 0x0677 - PCH Pm Slp S4 Min Assert
+ SLP_S4 Minimum Assertion Width Policy. Default is PchSlpS44s.
+**/
+ UINT8 PchPmSlpS4MinAssert;
+
+/** Offset 0x0678 - PCH Pm Slp Sus Min Assert
+ SLP_SUS Minimum Assertion Width Policy. Default is PchSlpSus4s.
+**/
+ UINT8 PchPmSlpSusMinAssert;
+
+/** Offset 0x0679 - PCH Pm Slp A Min Assert
+ SLP_A Minimum Assertion Width Policy. Default is PchSlpA2s.
+**/
+ UINT8 PchPmSlpAMinAssert;
+
+/** Offset 0x067A - SLP_S0# Override
+ Select 'Auto', it will be auto-configured according to probe type. Select 'Enabled'
+ will disable SLP_S0# assertion whereas 'Disabled' will enable SLP_S0# assertion
+ when debug is enabled. \n
+ Note: This BIOS option should keep 'Auto', other options are intended for advanced
+ configuration only.
+ 0:Disabled, 1:Enabled, 2:Auto
+**/
+ UINT8 SlpS0Override;
+
+/** Offset 0x067B - S0ix Override Settings
+ Select 'Auto', it will be auto-configured according to probe type. 'No Change' will
+ keep PMC default settings. Or select the desired debug probe type for S0ix Override
+ settings.\n
+ Reminder: DCI OOB (aka BSSB) uses CCA probe.\n
+ Note: This BIOS option should keep 'Auto', other options are intended for advanced
+ configuration only.
+ 0:No Change, 1:DCI OOB, 2:USB2 DbC, 3:Auto
+**/
+ UINT8 SlpS0DisQForDebug;
+
+/** Offset 0x067C - USB Overcurrent Override for DbC
+ This option overrides USB Over Current enablement state that USB OC will be disabled
+ after enabling this option. Enable when DbC is used to avoid signaling conflicts.
+ $EN_DIS
+**/
+ UINT8 PchEnableDbcObs;
+
+/** Offset 0x067D
+**/
+ UINT8 UnusedUpdSpace18[3];
+
+/** Offset 0x0680 - PCH Pm Lpc Clock Run
+ This member describes whether or not the LPC ClockRun feature of PCH should be enabled.
+ Default value is Disabled
+ $EN_DIS
+**/
+ UINT8 PchPmLpcClockRun;
+
+/** Offset 0x0681 - PCH Pm Slp Strch Sus Up
+ Enable SLP_X Stretching After SUS Well Power Up.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpStrchSusUp;
+
+/** Offset 0x0682 - PCH Pm Slp Lan Low Dc
+ Enable/Disable SLP_LAN# Low on DC Power.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpLanLowDc;
+
+/** Offset 0x0683 - PCH Pm Pwr Btn Override Period
+ PCH power button override period. 000b-4s, 001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.
+**/
+ UINT8 PchPmPwrBtnOverridePeriod;
+
+/** Offset 0x0684 - PCH Pm Disable Dsx Ac Present Pulldown
+ When Disable, PCH will internal pull down AC_PRESENT in deep SX and during G3 exit.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableDsxAcPresentPulldown;
+
+/** Offset 0x0685
+**/
+ UINT8 UnusedUpdSpace19;
+
+/** Offset 0x0686 - PCH Pm Disable Native Power Button
+ Power button native mode disable.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableNativePowerButton;
+
+/** Offset 0x0687 - PCH Pm Slp S0 Enable
+ Indicates whether SLP_S0# is to be asserted when PCH reaches idle state.
+ $EN_DIS
+**/
+ UINT8 PchPmSlpS0Enable;
+
+/** Offset 0x0688 - PCH Pm ME_WAKE_STS
+ Clear the ME_WAKE_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmMeWakeSts;
+
+/** Offset 0x0689 - PCH Pm WOL_OVR_WK_STS
+ Clear the WOL_OVR_WK_STS bit in the Power and Reset Status (PRSTS) register.
+ $EN_DIS
+**/
+ UINT8 PchPmWolOvrWkSts;
+
+/** Offset 0x068A - PCH Pm Reset Power Cycle Duration
+ Could be customized in the unit of second. Please refer to EDS for all support settings.
+ 0 is default, 1 is 1 second, 2 is 2 seconds, ...
+**/
+ UINT8 PchPmPwrCycDur;
+
+/** Offset 0x068B - PCH Pm Pcie Pll Ssc
+ Specifies the Pcie Pll Spread Spectrum Percentage. The default is 0xFF: AUTO - No
+ BIOS override.
+**/
+ UINT8 PchPmPciePllSsc;
+
+/** Offset 0x068C
+**/
+ UINT8 UnusedUpdSpace20;
+
+/** Offset 0x068D - PCH Sata Pwr Opt Enable
+ SATA Power Optimizer on PCH side.
+ $EN_DIS
+**/
+ UINT8 SataPwrOptEnable;
+
+/** Offset 0x068E - PCH Sata eSATA Speed Limit
+ When enabled, BIOS will configure the PxSCTL.SPD to 2 to limit the eSATA port speed.
+ $EN_DIS
+**/
+ UINT8 EsataSpeedLimit;
+
+/** Offset 0x068F - PCH Sata Speed Limit
+ Indicates the maximum speed the SATA controller can support 0h: PchSataSpeedDefault.
+**/
+ UINT8 SataSpeedLimit;
+
+/** Offset 0x0690 - Enable SATA Port HotPlug
+ Enable SATA Port HotPlug.
+**/
+ UINT8 SataPortsHotPlug[8];
+
+/** Offset 0x0698 - Enable SATA Port Interlock Sw
+ Enable SATA Port Interlock Sw.
+**/
+ UINT8 SataPortsInterlockSw[8];
+
+/** Offset 0x06A0 - Enable SATA Port External
+ Enable SATA Port External.
+**/
+ UINT8 SataPortsExternal[8];
+
+/** Offset 0x06A8 - Enable SATA Port SpinUp
+ Enable the COMRESET initialization Sequence to the device.
+**/
+ UINT8 SataPortsSpinUp[8];
+
+/** Offset 0x06B0 - Enable SATA Port Solid State Drive
+ 0: HDD; 1: SSD.
+**/
+ UINT8 SataPortsSolidStateDrive[8];
+
+/** Offset 0x06B8 - Enable SATA Port Enable Dito Config
+ Enable DEVSLP Idle Timeout settings (DmVal, DitoVal).
+**/
+ UINT8 SataPortsEnableDitoConfig[8];
+
+/** Offset 0x06C0 - Enable SATA Port DmVal
+ DITO multiplier. Default is 15.
+**/
+ UINT8 SataPortsDmVal[8];
+
+/** Offset 0x06C8 - Enable SATA Port DmVal
+ DEVSLP Idle Timeout (DITO), Default is 625.
+**/
+ UINT16 SataPortsDitoVal[8];
+
+/** Offset 0x06D8 - Enable SATA Port ZpOdd
+ Support zero power ODD.
+**/
+ UINT8 SataPortsZpOdd[8];
+
+/** Offset 0x06E0 - PCH Sata Rst Raid Device Id
+ Enable RAID Alternate ID.
+ 0:Client, 1:Alternate, 2:Server
+**/
+ UINT8 SataRstRaidDeviceId;
+
+/** Offset 0x06E1 - PCH Sata Rst Raid0
+ RAID0.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid0;
+
+/** Offset 0x06E2 - PCH Sata Rst Raid1
+ RAID1.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid1;
+
+/** Offset 0x06E3 - PCH Sata Rst Raid10
+ RAID10.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid10;
+
+/** Offset 0x06E4 - PCH Sata Rst Raid5
+ RAID5.
+ $EN_DIS
+**/
+ UINT8 SataRstRaid5;
+
+/** Offset 0x06E5 - PCH Sata Rst Irrt
+ Intel Rapid Recovery Technology.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrt;
+
+/** Offset 0x06E6 - PCH Sata Rst Orom Ui Banner
+ OROM UI and BANNER.
+ $EN_DIS
+**/
+ UINT8 SataRstOromUiBanner;
+
+/** Offset 0x06E7 - PCH Sata Rst Orom Ui Delay
+ 00b: 2 secs; 01b: 4 secs; 10b: 6 secs; 11: 8 secs (see: PCH_SATA_OROM_DELAY).
+**/
+ UINT8 SataRstOromUiDelay;
+
+/** Offset 0x06E8 - PCH Sata Rst Hdd Unlock
+ Indicates that the HDD password unlock in the OS is enabled.
+ $EN_DIS
+**/
+ UINT8 SataRstHddUnlock;
+
+/** Offset 0x06E9 - PCH Sata Rst Led Locate
+ Indicates that the LED/SGPIO hardware is attached and ping to locate feature is
+ enabled on the OS.
+ $EN_DIS
+**/
+ UINT8 SataRstLedLocate;
+
+/** Offset 0x06EA - PCH Sata Rst Irrt Only
+ Allow only IRRT drives to span internal and external ports.
+ $EN_DIS
+**/
+ UINT8 SataRstIrrtOnly;
+
+/** Offset 0x06EB - PCH Sata Rst Smart Storage
+ RST Smart Storage caching Bit.
+ $EN_DIS
+**/
+ UINT8 SataRstSmartStorage;
+
+/** Offset 0x06EC - PCH Sata Rst Pcie Storage Remap enable
+ Enable Intel RST for PCIe Storage remapping.
+**/
+ UINT8 SataRstPcieEnable[3];
+
+/** Offset 0x06EF - PCH Sata Rst Pcie Storage Port
+ Intel RST for PCIe Storage remapping - PCIe Port Selection (1-based, 0 = autodetect).
+**/
+ UINT8 SataRstPcieStoragePort[3];
+
+/** Offset 0x06F2 - PCH Sata Rst Pcie Device Reset Delay
+ PCIe Storage Device Reset Delay in milliseconds. Default value is 100ms
+**/
+ UINT8 SataRstPcieDeviceResetDelay[3];
+
+/** Offset 0x06F5 - Enable eMMC HS400 Training
+ Deprecated.
+ $EN_DIS
+**/
+ UINT8 PchScsEmmcHs400TuningRequired;
+
+/** Offset 0x06F6 - Set HS400 Tuning Data Valid
+ Set if HS400 Tuning Data Valid.
+ $EN_DIS
+**/
+ UINT8 PchScsEmmcHs400DllDataValid;
+
+/** Offset 0x06F7 - Rx Strobe Delay Control
+ Rx Strobe Delay Control - Rx Strobe Delay DLL 1 (HS400 Mode).
+**/
+ UINT8 PchScsEmmcHs400RxStrobeDll1;
+
+/** Offset 0x06F8 - Tx Data Delay Control
+ Tx Data Delay Control 1 - Tx Data Delay (HS400 Mode).
+**/
+ UINT8 PchScsEmmcHs400TxDataDll;
+
+/** Offset 0x06F9 - I/O Driver Strength
+ Deprecated.
+ 0:33 Ohm, 1:40 Ohm, 2:50 Ohm
+**/
+ UINT8 PchScsEmmcHs400DriverStrength;
+
+/** Offset 0x06FA - PCH SerialIo I2C Pads Termination
+ 0x0: Hardware default, 0x1: None, 0x13: 1kOhm weak pull-up, 0x15: 5kOhm weak pull-up,
+ 0x19: 20kOhm weak pull-up - Enable/disable SerialIo I2C0,I2C1,I2C2,I2C3,I2C4,I2C5
+ pads termination respectively. One byte for each controller, byte0 for I2C0, byte1
+ for I2C1, and so on.
+**/
+ UINT8 PchSerialIoI2cPadsTermination[6];
+
+/** Offset 0x0700
+**/
+ UINT8 UnusedUpdSpace21;
+
+/** Offset 0x0701 - PcdSerialIoUart0PinMuxing
+ Select SerialIo Uart0 pin muxing. Setting applicable only if SerialIO UART0 is enabled.
+ 0:default pins, 1:pins muxed with CNV_BRI/RGI
+**/
+ UINT8 SerialIoUart0PinMuxing;
+
+/** Offset 0x0702
+**/
+ UINT8 UnusedUpdSpace22[1];
+
+/** Offset 0x0703 - Enables UART hardware flow control, CTS and RTS lines
+ Enables UART hardware flow control, CTS and RTS linesh.
+**/
+ UINT8 SerialIoUartHwFlowCtrl[3];
+
+/** Offset 0x0706 - UART Number For Debug Purpose
+ UART number for debug purpose. 0:UART0, 1: UART1, 2:UART2. Note: If UART0 is selected
+ as CNVi BT Core interface, it cannot be used for debug purpose.
+ 0:UART0, 1:UART1, 2:UART2
+**/
+ UINT8 SerialIoDebugUartNumber;
+
+/** Offset 0x0707 - Enable Debug UART Controller
+ Enable debug UART controller after post.
+ $EN_DIS
+**/
+ UINT8 SerialIoEnableDebugUartAfterPost;
+
+/** Offset 0x0708 - Enable Serial IRQ
+ Determines if enable Serial IRQ.
+ $EN_DIS
+**/
+ UINT8 PchSirqEnable;
+
+/** Offset 0x0709 - Serial IRQ Mode Select
+ Serial IRQ Mode Select, 0: quiet mode, 1: continuous mode.
+ $EN_DIS
+**/
+ UINT8 PchSirqMode;
+
+/** Offset 0x070A - Start Frame Pulse Width
+ Start Frame Pulse Width, 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk.
+ 0: PchSfpw4Clk, 1: PchSfpw6Clk, 2: PchSfpw8Clk
+**/
+ UINT8 PchStartFramePulse;
+
+/** Offset 0x070B - Reserved
+ Reserved
+ $EN_DIS
+**/
+ UINT8 ReservedForFuture1;
+
+/** Offset 0x070C - Thermal Device SMI Enable
+ This locks down SMI Enable on Alert Thermal Sensor Trip.
+ $EN_DIS
+**/
+ UINT8 PchTsmicLock;
+
+/** Offset 0x070D - Thermal Throttling Custimized T0Level Value
+ Custimized T0Level value.
+**/
+ UINT16 PchT0Level;
+
+/** Offset 0x070F - Thermal Throttling Custimized T1Level Value
+ Custimized T1Level value.
+**/
+ UINT16 PchT1Level;
+
+/** Offset 0x0711 - Thermal Throttling Custimized T2Level Value
+ Custimized T2Level value.
+**/
+ UINT16 PchT2Level;
+
+/** Offset 0x0713 - Enable The Thermal Throttle
+ Enable the thermal throttle function.
+ $EN_DIS
+**/
+ UINT8 PchTTEnable;
+
+/** Offset 0x0714 - PMSync State 13
+ When set to 1 and the programmed GPIO pin is a 1, then PMSync state 13 will force
+ at least T2 state.
+ $EN_DIS
+**/
+ UINT8 PchTTState13Enable;
+
+/** Offset 0x0715 - Thermal Throttle Lock
+ Thermal Throttle Lock.
+ $EN_DIS
+**/
+ UINT8 PchTTLock;
+
+/** Offset 0x0716 - Thermal Throttling Suggested Setting
+ Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 TTSuggestedSetting;
+
+/** Offset 0x0717 - Enable PCH Cross Throttling
+ Enable/Disable PCH Cross Throttling
+ $EN_DIS
+**/
+ UINT8 TTCrossThrottling;
+
+/** Offset 0x0718 - DMI Thermal Sensor Autonomous Width Enable
+ DMI Thermal Sensor Autonomous Width Enable.
+ $EN_DIS
+**/
+ UINT8 PchDmiTsawEn;
+
+/** Offset 0x0719 - DMI Thermal Sensor Suggested Setting
+ DMT thermal sensor suggested representative values.
+ $EN_DIS
+**/
+ UINT8 DmiSuggestedSetting;
+
+/** Offset 0x071A - Thermal Sensor 0 Target Width
+ DMT thermal sensor suggested representative values.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS0TW;
+
+/** Offset 0x071B - Thermal Sensor 1 Target Width
+ Thermal Sensor 1 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS1TW;
+
+/** Offset 0x071C - Thermal Sensor 2 Target Width
+ Thermal Sensor 2 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS2TW;
+
+/** Offset 0x071D - Thermal Sensor 3 Target Width
+ Thermal Sensor 3 Target Width.
+ 0:x1, 1:x2, 2:x4, 3:x8, 4:x16
+**/
+ UINT8 DmiTS3TW;
+
+/** Offset 0x071E - Port 0 T1 Multipler
+ Port 0 T1 Multipler.
+**/
+ UINT8 SataP0T1M;
+
+/** Offset 0x071F - Port 0 T2 Multipler
+ Port 0 T2 Multipler.
+**/
+ UINT8 SataP0T2M;
+
+/** Offset 0x0720 - Port 0 T3 Multipler
+ Port 0 T3 Multipler.
+**/
+ UINT8 SataP0T3M;
+
+/** Offset 0x0721 - Port 0 Tdispatch
+ Port 0 Tdispatch.
+**/
+ UINT8 SataP0TDisp;
+
+/** Offset 0x0722 - Port 1 T1 Multipler
+ Port 1 T1 Multipler.
+**/
+ UINT8 SataP1T1M;
+
+/** Offset 0x0723 - Port 1 T2 Multipler
+ Port 1 T2 Multipler.
+**/
+ UINT8 SataP1T2M;
+
+/** Offset 0x0724 - Port 1 T3 Multipler
+ Port 1 T3 Multipler.
+**/
+ UINT8 SataP1T3M;
+
+/** Offset 0x0725 - Port 1 Tdispatch
+ Port 1 Tdispatch.
+**/
+ UINT8 SataP1TDisp;
+
+/** Offset 0x0726 - Port 0 Tinactive
+ Port 0 Tinactive.
+**/
+ UINT8 SataP0Tinact;
+
+/** Offset 0x0727 - Port 0 Alternate Fast Init Tdispatch
+ Port 0 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP0TDispFinit;
+
+/** Offset 0x0728 - Port 1 Tinactive
+ Port 1 Tinactive.
+**/
+ UINT8 SataP1Tinact;
+
+/** Offset 0x0729 - Port 1 Alternate Fast Init Tdispatch
+ Port 1 Alternate Fast Init Tdispatch.
+ $EN_DIS
+**/
+ UINT8 SataP1TDispFinit;
+
+/** Offset 0x072A - Sata Thermal Throttling Suggested Setting
+ Sata Thermal Throttling Suggested Setting.
+ $EN_DIS
+**/
+ UINT8 SataThermalSuggestedSetting;
+
+/** Offset 0x072B - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+ $EN_DIS
+**/
+ UINT8 PchMemoryThrottlingEnable;
+
+/** Offset 0x072C - Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPmsyncEnable[2];
+
+/** Offset 0x072E - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryC0TransmitEnable[2];
+
+/** Offset 0x0730 - Enable Memory Thermal Throttling
+ Enable Memory Thermal Throttling.
+**/
+ UINT8 PchMemoryPinSelection[2];
+
+/** Offset 0x0732 - Thermal Device Temperature
+ Decides the temperature.
+**/
+ UINT16 PchTemperatureHotLevel;
+
+/** Offset 0x0734 - Enable xHCI Compliance Mode
+ Compliance Mode can be enabled for testing through this option but this is disabled
+ by default.
+ $EN_DIS
+**/
+ UINT8 PchEnableComplianceMode;
+
+/** Offset 0x0735 - USB2 Port Over Current Pin
+ Describe the specific over current pin number of USB 2.0 Port N.
+**/
+ UINT8 Usb2OverCurrentPin[16];
+
+/** Offset 0x0745 - USB3 Port Over Current Pin
+ Describe the specific over current pin number of USB 3.0 Port N.
+**/
+ UINT8 Usb3OverCurrentPin[10];
+
+/** Offset 0x074F - Enable 8254 Static Clock Gating
+ Set 8254CGE=1 is required for SLP_S0 support. However, set 8254CGE=1 in POST time
+ might fail to boot legacy OS using 8254 timer. Make sure it is disabled to support
+ boot legacy OS using 8254 timer. Also enable this while S0ix is enabled.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGating;
+
+/** Offset 0x0750 - PCH Sata Rst Optane Memory
+ Optane Memory
+ $EN_DIS
+**/
+ UINT8 SataRstOptaneMemory;
+
+/** Offset 0x0751 - PCH Sata Rst CPU Attached Storage
+ CPU Attached Storage
+ $EN_DIS
+**/
+ UINT8 SataRstCpuAttachedStorage;
+
+/** Offset 0x0752 - Enable 8254 Static Clock Gating On S3
+ This is only applicable when Enable8254ClockGating is disabled. FSP will do the
+ 8254 CGE programming on S3 resume when Enable8254ClockGatingOnS3 is enabled. This
+ avoids the SMI requirement for the programming.
+ $EN_DIS
+**/
+ UINT8 Enable8254ClockGatingOnS3;
+
+/** Offset 0x0753
+**/
+ UINT8 UnusedUpdSpace23;
+
+/** Offset 0x0754 - Pch PCIE device override table pointer
+ The PCIe device table is being used to override PCIe device ASPM settings. This
+ is a pointer points to a 32bit address. And it's only used in PostMem phase. Please
+ refer to PCH_PCIE_DEVICE_OVERRIDE structure for the table. Last entry VendorId
+ must be 0.
+**/
+ UINT32 PchPcieDeviceOverrideTablePtr;
+
+/** Offset 0x0758 - Enable TCO timer.
+ When FALSE, it disables PCH ACPI timer, and stops TCO timer. NOTE: This will have
+ huge power impact when it's enabled. If TCO timer is disabled, uCode ACPI timer
+ emulation must be enabled, and WDAT table must not be exposed to the OS.
+ $EN_DIS
+**/
+ UINT8 EnableTcoTimer;
+
+/** Offset 0x0759 - BgpdtHash[4]
+ BgpdtHash values
+**/
+ UINT64 BgpdtHash[4];
+
+/** Offset 0x0779 - BiosGuardAttr
+ BiosGuardAttr default values
+**/
+ UINT32 BiosGuardAttr;
+
+/** Offset 0x077D - BiosGuardModulePtr
+ BiosGuardModulePtr default values
+**/
+ UINT64 BiosGuardModulePtr;
+
+/** Offset 0x0785 - SendEcCmd
+ SendEcCmd function pointer. \n
+ @code typedef EFI_STATUS (EFIAPI *PLATFORM_SEND_EC_COMMAND) (IN EC_COMMAND_TYPE
+ EcCmdType, IN UINT8 EcCmd, IN UINT8 SendData, IN OUT UINT8 *ReceiveData); @endcode
+**/
+ UINT64 SendEcCmd;
+
+/** Offset 0x078D - EcCmdProvisionEav
+ Ephemeral Authorization Value default values. Provisions an ephemeral shared secret to the EC
+**/
+ UINT8 EcCmdProvisionEav;
+
+/** Offset 0x078E - EcCmdLock
+ EcCmdLock default values. Locks Ephemeral Authorization Value sent previously
+**/
+ UINT8 EcCmdLock;
+
+/** Offset 0x078F - SgxEpoch0
+ SgxEpoch0 default values
+**/
+ UINT64 SgxEpoch0;
+
+/** Offset 0x0797 - SgxEpoch1
+ SgxEpoch1 default values
+**/
+ UINT64 SgxEpoch1;
+
+/** Offset 0x079F - SgxSinitNvsData
+ SgxSinitNvsData default values
+**/
+ UINT8 SgxSinitNvsData;
+
+/** Offset 0x07A0 - Si Config CSM Flag.
+ Platform specific common policies that used by several silicon components. CSM status flag.
+ $EN_DIS
+**/
+ UINT8 SiCsmFlag;
+
+/** Offset 0x07A1
+**/
+ UINT32 SiSsidTablePtr;
+
+/** Offset 0x07A5
+**/
+ UINT16 SiNumberOfSsidTableEntry;
+
+/** Offset 0x07A7 - SATA RST Interrupt Mode
+ Allowes to choose which interrupts will be implemented by SATA controller in RAID mode.
+ 0:Msix, 1:Msi, 2:Legacy
+**/
+ UINT8 SataRstInterrupt;
+
+/** Offset 0x07A8 - ME Unconfig on RTC clear
+ 0: Disable ME Unconfig On Rtc Clear. <b>1: Enable ME Unconfig On Rtc Clear</b>.
+ 2: Cmos is clear, status unkonwn. 3: Reserved
+ 0: Disable ME Unconfig On Rtc Clear, 1: Enable ME Unconfig On Rtc Clear, 2: Cmos
+ is clear, 3: Reserved
+**/
+ UINT8 MeUnconfigOnRtcClear;
+
+/** Offset 0x07A9 - Enable PS_ON.
+ PS_ON is a new C10 state from the CPU on desktop SKUs that enables a lower power
+ target that will be required by the California Energy Commission (CEC). When FALSE,
+ PS_ON is to be disabled.
+ $EN_DIS
+**/
+ UINT8 PsOnEnable;
+
+/** Offset 0x07AA - Pmc Cpu C10 Gate Pin Enable
+ Enable/Disable platform support for CPU_C10_GATE# pin to control gating of CPU VccIO
+ and VccSTG rails instead of SLP_S0# pin.
+ $EN_DIS
+**/
+ UINT8 PmcCpuC10GatePinEnable;
+
+/** Offset 0x07AB - Pch Dmi Aspm Ctrl
+ ASPM configuration on the PCH side of the DMI/OPI Link. Default is <b>PchPcieAspmAutoConfig</b>
+ 0:Disabled, 1:L0s, 2:L1, 3:L0sL1, 4:Auto
+**/
+ UINT8 PchDmiAspmCtrl;
+
+/** Offset 0x07AC
+**/
+ UINT8 ReservedFspsUpd[1];
+} FSP_S_CONFIG;
+
+/** Fsp S Test Configuration
+**/
+typedef struct {
+
+/** Offset 0x07AD
+**/
+ UINT32 Signature;
+
+/** Offset 0x07B1 - Enable/Disable Device 7
+ Enable: Device 7 enabled, Disable (Default): Device 7 disabled
+ $EN_DIS
+**/
+ UINT8 ChapDeviceEnable;
+
+/** Offset 0x07B2 - Skip PAM register lock
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ $EN_DIS
+**/
+ UINT8 SkipPamLock;
+
+/** Offset 0x07B3 - EDRAM Test Mode
+ Enable: PAM register will not be locked by RC, platform code should lock it, Disable(Default):
+ PAM registers will be locked by RC
+ 0: EDRAM SW disable, 1: EDRAM SW Enable, 2: EDRAM HW mode
+**/
+ UINT8 EdramTestMode;
+
+/** Offset 0x07B4 - DMI Extended Sync Control
+ Enable: Enable DMI Extended Sync Control, Disable(Default): Disable DMI Extended
+ Sync Control
+ $EN_DIS
+**/
+ UINT8 DmiExtSync;
+
+/** Offset 0x07B5 - DMI IOT Control
+ Enable: Enable DMI IOT Control, Disable(Default): Disable DMI IOT Control
+ $EN_DIS
+**/
+ UINT8 DmiIot;
+
+/** Offset 0x07B6 - PEG Max Payload size per root port
+ 0xFF(Default):Auto, 0x1: Force 128B, 0x2: Force 256B
+ 0xFF: Auto, 0x1: Force 128B, 0x2: Force 256B
+**/
+ UINT8 PegMaxPayload[4];
+
+/** Offset 0x07BA - Enable/Disable IGFX RenderStandby
+ Enable(Default): Enable IGFX RenderStandby, Disable: Disable IGFX RenderStandby
+ $EN_DIS
+**/
+ UINT8 RenderStandby;
+
+/** Offset 0x07BB - Enable/Disable IGFX PmSupport
+ Enable(Default): Enable IGFX PmSupport, Disable: Disable IGFX PmSupport
+ $EN_DIS
+**/
+ UINT8 PmSupport;
+
+/** Offset 0x07BC - Enable/Disable CdynmaxClamp
+ Enable(Default): Enable CdynmaxClamp, Disable: Disable CdynmaxClamp
+ $EN_DIS
+**/
+ UINT8 CdynmaxClampEnable;
+
+/** Offset 0x07BD - Disable VT-d
+ 0=Enable/FALSE(VT-d enabled), 1=Disable/TRUE (VT-d disabled)
+ $EN_DIS
+**/
+ UINT8 VtdDisable;
+
+/** Offset 0x07BE - GT Frequency Limit
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+ 0xFF: Auto(Default), 2: 100 Mhz, 3: 150 Mhz, 4: 200 Mhz, 5: 250 Mhz, 6: 300 Mhz,
+ 7: 350 Mhz, 8: 400 Mhz, 9: 450 Mhz, 0xA: 500 Mhz, 0xB: 550 Mhz, 0xC: 600 Mhz, 0xD:
+ 650 Mhz, 0xE: 700 Mhz, 0xF: 750 Mhz, 0x10: 800 Mhz, 0x11: 850 Mhz, 0x12:900 Mhz,
+ 0x13: 950 Mhz, 0x14: 1000 Mhz, 0x15: 1050 Mhz, 0x16: 1100 Mhz, 0x17: 1150 Mhz,
+ 0x18: 1200 Mhz
+**/
+ UINT8 GtFreqMax;
+
+/** Offset 0x07BF - Disable Turbo GT
+ 0=Disable: GT frequency is not limited, 1=Enable: Disables Turbo GT frequency
+ $EN_DIS
+**/
+ UINT8 DisableTurboGt;
+
+/** Offset 0x07C0 - SaPostMemTestRsvd
+ Reserved for SA Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 SaPostMemTestRsvd[11];
+
+/** Offset 0x07CB - 1-Core Ratio Limit
+ 1-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 1-Core
+ Ratio Limit Must be greater than or equal to 2-Core Ratio Limit, 3-Core Ratio Limit,
+ 4-Core Ratio Limit, 5-Core Ratio Limit, 6-Core Ratio Limit, 7-Core Ratio Limit,
+ 8-Core Ratio Limit. Range is 0 to 255
+**/
+ UINT8 OneCoreRatioLimit;
+
+/** Offset 0x07CC - 2-Core Ratio Limit
+ 2-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 2-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 TwoCoreRatioLimit;
+
+/** Offset 0x07CD - 3-Core Ratio Limit
+ 3-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 3-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 ThreeCoreRatioLimit;
+
+/** Offset 0x07CE - 4-Core Ratio Limit
+ 4-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 4-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+**/
+ UINT8 FourCoreRatioLimit;
+
+/** Offset 0x07CF - Enable or Disable HWP
+ Enable or Disable HWP(Hardware P states) Support. 0: Disable; <b>1: Enable;</b>
+ 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 Hwp;
+
+/** Offset 0x07D0 - Hardware Duty Cycle Control
+ Hardware Duty Cycle Control configuration. 0: Disabled; <b>1: Enabled</b> 2-3:Reserved
+ $EN_DIS
+**/
+ UINT8 HdcControl;
+
+/** Offset 0x07D1 - Package Long duration turbo mode time
+ Package Long duration turbo mode time window in seconds. 0 = AUTO, uses 28 seconds.
+ Valid values(Unit in seconds) 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40
+ , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PowerLimit1Time;
+
+/** Offset 0x07D2 - Short Duration Turbo Mode
+ Enable or Disable short duration Turbo Mode. </b>0 : Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 PowerLimit2;
+
+/** Offset 0x07D3 - Turbo settings Lock
+ Lock all Turbo settings Enable/Disable; <b>0: Disable , </b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 TurboPowerLimitLock;
+
+/** Offset 0x07D4 - Package PL3 time window
+ Package PL3 time window range for this policy from 0 to 64ms
+**/
+ UINT8 PowerLimit3Time;
+
+/** Offset 0x07D5 - Package PL3 Duty Cycle
+ Package PL3 Duty Cycle; Valid Range is 0 to 100
+**/
+ UINT8 PowerLimit3DutyCycle;
+
+/** Offset 0x07D6 - Package PL3 Lock
+ Package PL3 Lock Enable/Disable; <b>0: Disable ; <b> 1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit3Lock;
+
+/** Offset 0x07D7 - Package PL4 Lock
+ Package PL4 Lock Enable/Disable; <b>0: Disable ; <b>1: Enable
+ $EN_DIS
+**/
+ UINT8 PowerLimit4Lock;
+
+/** Offset 0x07D8 - TCC Activation Offset
+ TCC Activation Offset. Offset from factory set TCC activation temperature at which
+ the Thermal Control Circuit must be activated. TCC will be activated at TCC Activation
+ Temperature, in volts.For Y SKU, the recommended default for this policy is <b>15</b>,
+ For all other SKUs the recommended default are <b>0</b>
+**/
+ UINT8 TccActivationOffset;
+
+/** Offset 0x07D9 - Tcc Offset Clamp Enable/Disable
+ Tcc Offset Clamp for Runtime Average Temperature Limit (RATL) allows CPU to throttle
+ below P1.For Y SKU, the recommended default for this policy is <b>1: Enabled</b>,
+ For all other SKUs the recommended default are <b>0: Disabled</b>.
+ $EN_DIS
+**/
+ UINT8 TccOffsetClamp;
+
+/** Offset 0x07DA - Tcc Offset Lock
+ Tcc Offset Lock for Runtime Average Temperature Limit (RATL) to lock temperature
+ target; <b>0: Disabled</b>; 1: Enabled.
+ $EN_DIS
+**/
+ UINT8 TccOffsetLock;
+
+/** Offset 0x07DB - Custom Ratio State Entries
+ The number of custom ratio state entries, ranges from 0 to 40 for a valid custom
+ ratio table.Sets the number of custom P-states. At least 2 states must be present
+**/
+ UINT8 NumberOfEntries;
+
+/** Offset 0x07DC - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 1. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom1PowerLimit1Time;
+
+/** Offset 0x07DD - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 1. Valid Range 0 to 255
+**/
+ UINT8 Custom1TurboActivationRatio;
+
+/** Offset 0x07DE - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom1ConfigTdpControl;
+
+/** Offset 0x07DF - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 2. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom2PowerLimit1Time;
+
+/** Offset 0x07E0 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 2. Valid Range 0 to 255
+**/
+ UINT8 Custom2TurboActivationRatio;
+
+/** Offset 0x07E1 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom2ConfigTdpControl;
+
+/** Offset 0x07E2 - Custom Short term Power Limit time window
+ Short term Power Limit time window value for custom CTDP level 3. Valid Range 0
+ to 128, 0 = AUTO
+**/
+ UINT8 Custom3PowerLimit1Time;
+
+/** Offset 0x07E3 - Custom Turbo Activation Ratio
+ Turbo Activation Ratio for custom cTDP level 3. Valid Range 0 to 255
+**/
+ UINT8 Custom3TurboActivationRatio;
+
+/** Offset 0x07E4 - Custom Config Tdp Control
+ Config Tdp Control (0/1/2) value for custom cTDP level 1. Valid Range is 0 to 2
+**/
+ UINT8 Custom3ConfigTdpControl;
+
+/** Offset 0x07E5 - ConfigTdp mode settings Lock
+ Lock the ConfigTdp mode settings from runtime changes; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ConfigTdpLock;
+
+/** Offset 0x07E6 - Load Configurable TDP SSDT
+ Configure whether to load Configurable TDP SSDT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ConfigTdpBios;
+
+/** Offset 0x07E7 - PL1 Enable value
+ PL1 Enable value to limit average platform power. <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit1;
+
+/** Offset 0x07E8 - PL1 timewindow
+ PL1 timewindow in seconds. 0 = AUTO, uses 28 seconds. Valid values(Unit in seconds)
+ 1 to 8 , 10 , 12 ,14 , 16 , 20 , 24 , 28 , 32 , 40 , 48 , 56 , 64 , 80 , 96 , 112 , 128
+**/
+ UINT8 PsysPowerLimit1Time;
+
+/** Offset 0x07E9 - PL2 Enable Value
+ PL2 Enable activates the PL2 value to limit average platform power.<b>0: Disable</b>;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PsysPowerLimit2;
+
+/** Offset 0x07EA - Enable or Disable MLC Streamer Prefetcher
+ Enable or Disable MLC Streamer Prefetcher; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MlcStreamerPrefetcher;
+
+/** Offset 0x07EB - Enable or Disable MLC Spatial Prefetcher
+ Enable or Disable MLC Spatial Prefetcher; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 MlcSpatialPrefetcher;
+
+/** Offset 0x07EC - Enable or Disable Monitor /MWAIT instructions
+ Enable or Disable Monitor /MWAIT instructions; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MonitorMwaitEnable;
+
+/** Offset 0x07ED - Enable or Disable initialization of machine check registers
+ Enable or Disable initialization of machine check registers; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 MachineCheckEnable;
+
+/** Offset 0x07EE - Deprecated DO NOT USE Enable or Disable processor debug features
+ @deprecated Enable or Disable processor debug features; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceEnable;
+
+/** Offset 0x07EF - Lock or Unlock debug interface features
+ Lock or Unlock debug interface features; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DebugInterfaceLockEnable;
+
+/** Offset 0x07F0 - AP Idle Manner of waiting for SIPI
+ AP Idle Manner of waiting for SIPI; 1: HALT loop; <b>2: MWAIT loop</b>; 3: RUN loop.
+ 1: HALT loop, 2: MWAIT loop, 3: RUN loop
+**/
+ UINT8 ApIdleManner;
+
+/** Offset 0x07F1 - Control on Processor Trace output scheme
+ Control on Processor Trace output scheme; <b>0: Single Range Output</b>; 1: ToPA Output.
+ 0: Single Range Output, 1: ToPA Output
+**/
+ UINT8 ProcessorTraceOutputScheme;
+
+/** Offset 0x07F2 - Enable or Disable Processor Trace feature
+ Enable or Disable Processor Trace feature; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcessorTraceEnable;
+
+/** Offset 0x07F3 - Base of memory region allocated for Processor Trace
+ Base address of memory region allocated for Processor Trace. Processor Trace requires
+ 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT64 ProcessorTraceMemBase;
+
+/** Offset 0x07FB - Memory region allocation for Processor Trace
+ Length in bytes of memory region allocated for Processor Trace. Processor Trace
+ requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. <b>0: Disable</b>
+**/
+ UINT32 ProcessorTraceMemLength;
+
+/** Offset 0x07FF - Enable or Disable Voltage Optimization feature
+ Enable or Disable Voltage Optimization feature 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 VoltageOptimization;
+
+/** Offset 0x0800 - Enable or Disable Intel SpeedStep Technology
+ Enable or Disable Intel SpeedStep Technology. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Eist;
+
+/** Offset 0x0801 - Enable or Disable Energy Efficient P-state
+ Enable or Disable Energy Efficient P-state will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientPState;
+
+/** Offset 0x0802 - Enable or Disable Energy Efficient Turbo
+ Enable or Disable Energy Efficient Turbo, will be applied in Turbo mode. Disable;
+ <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 EnergyEfficientTurbo;
+
+/** Offset 0x0803 - Enable or Disable T states
+ Enable or Disable T states; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 TStates;
+
+/** Offset 0x0804 - Enable or Disable Bi-Directional PROCHOT#
+ Enable or Disable Bi-Directional PROCHOT#; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 BiProcHot;
+
+/** Offset 0x0805 - Enable or Disable PROCHOT# signal being driven externally
+ Enable or Disable PROCHOT# signal being driven externally; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 DisableProcHotOut;
+
+/** Offset 0x0806 - Enable or Disable PROCHOT# Response
+ Enable or Disable PROCHOT# Response; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 ProcHotResponse;
+
+/** Offset 0x0807 - Enable or Disable VR Thermal Alert
+ Enable or Disable VR Thermal Alert; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 DisableVrThermalAlert;
+
+/** Offset 0x0808 - Enable or Disable Thermal Reporting
+ Enable or Disable Thermal Reporting through ACPI tables; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 AutoThermalReporting;
+
+/** Offset 0x0809 - Enable or Disable Thermal Monitor
+ Enable or Disable Thermal Monitor; 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 ThermalMonitor;
+
+/** Offset 0x080A - Enable or Disable CPU power states (C-states)
+ Enable or Disable CPU power states (C-states). 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 Cx;
+
+/** Offset 0x080B - Configure C-State Configuration Lock
+ Configure C-State Configuration Lock; 0: Disable; <b>1: Enable</b>.
+ $EN_DIS
+**/
+ UINT8 PmgCstCfgCtrlLock;
+
+/** Offset 0x080C - Enable or Disable Enhanced C-states
+ Enable or Disable Enhanced C-states. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1e;
+
+/** Offset 0x080D - Enable or Disable Package Cstate Demotion
+ Enable or Disable Package Cstate Demotion. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 PkgCStateDemotion;
+
+/** Offset 0x080E - Enable or Disable Package Cstate UnDemotion
+ Enable or Disable Package Cstate UnDemotion. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 PkgCStateUnDemotion;
+
+/** Offset 0x080F - Enable or Disable CState-Pre wake
+ Enable or Disable CState-Pre wake. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CStatePreWake;
+
+/** Offset 0x0810 - Enable or Disable TimedMwait Support.
+ Enable or Disable TimedMwait Support. <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 TimedMwait;
+
+/** Offset 0x0811 - Enable or Disable IO to MWAIT redirection
+ Enable or Disable IO to MWAIT redirection; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 CstCfgCtrIoMwaitRedirection;
+
+/** Offset 0x0812 - Set the Max Pkg Cstate
+ Set the Max Pkg Cstate. Default set to Auto which limits the Max Pkg Cstate to deep
+ C-state. Valid values 0 - C0/C1 , 1 - C2 , 2 - C3 , 3 - C6 , 4 - C7 , 5 - C7S ,
+ 6 - C8 , 7 - C9 , 8 - C10 , 254 - CPU Default , 255 - Auto
+**/
+ UINT8 PkgCStateLimit;
+
+/** Offset 0x0813 - TimeUnit for C-State Latency Control0
+ TimeUnit for C-State Latency Control0; Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl0TimeUnit;
+
+/** Offset 0x0814 - TimeUnit for C-State Latency Control1
+ TimeUnit for C-State Latency Control1;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl1TimeUnit;
+
+/** Offset 0x0815 - TimeUnit for C-State Latency Control2
+ TimeUnit for C-State Latency Control2;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl2TimeUnit;
+
+/** Offset 0x0816 - TimeUnit for C-State Latency Control3
+ TimeUnit for C-State Latency Control3;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl3TimeUnit;
+
+/** Offset 0x0817 - TimeUnit for C-State Latency Control4
+ Time - 1ns , 1 - 32ns , 2 - 1024ns , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl4TimeUnit;
+
+/** Offset 0x0818 - TimeUnit for C-State Latency Control5
+ TimeUnit for C-State Latency Control5;Valid values 0 - 1ns , 1 - 32ns , 2 - 1024ns
+ , 3 - 32768ns , 4 - 1048576ns , 5 - 33554432ns
+**/
+ UINT8 CstateLatencyControl5TimeUnit;
+
+/** Offset 0x0819 - Interrupt Redirection Mode Select
+ Interrupt Redirection Mode Select.0: Fixed priority; 1: Round robin;2: Hash vector;4:
+ PAIR with fixed priority;5: PAIR with round robin;6: PAIR with hash vector;7: No change.
+**/
+ UINT8 PpmIrmSetting;
+
+/** Offset 0x081A - Lock prochot configuration
+ Lock prochot configuration Enable/Disable; <b>0: Disable</b>; 1: Enable
+ $EN_DIS
+**/
+ UINT8 ProcHotLock;
+
+/** Offset 0x081B - Configuration for boot TDP selection
+ Configuration for boot TDP selection; <b>0: TDP Nominal</b>; 1: TDP Down; 2: TDP
+ Up;0xFF : Deactivate
+**/
+ UINT8 ConfigTdpLevel;
+
+/** Offset 0x081C - Race To Halt
+ Enable/Disable Race To Halt feature. RTH will dynamically increase CPU frequency
+ in order to enter pkg C-State faster to reduce overall power. (RTH is controlled
+ through MSR 1FC bit 20)Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 RaceToHalt;
+
+/** Offset 0x081D - Max P-State Ratio
+ Max P-State Ratio, Valid Range 0 to 0x7F
+**/
+ UINT8 MaxRatio;
+
+/** Offset 0x081E - P-state ratios for custom P-state table
+ P-state ratios for custom P-state table. NumberOfEntries has valid range between
+ 0 to 40. For no. of P-States supported(NumberOfEntries) , StateRatio[NumberOfEntries]
+ are configurable. Valid Range of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatio[40];
+
+/** Offset 0x0846 - P-state ratios for max 16 version of custom P-state table
+ P-state ratios for max 16 version of custom P-state table. This table is used for
+ OS versions limited to a max of 16 P-States. If the first entry of this table is
+ 0, or if Number of Entries is 16 or less, then this table will be ignored, and
+ up to the top 16 values of the StateRatio table will be used instead. Valid Range
+ of each entry is 0 to 0x7F
+**/
+ UINT8 StateRatioMax16[16];
+
+/** Offset 0x0856 - Platform Power Pmax
+ PCODE MMIO Mailbox: Platform Power Pmax. <b>0 - Auto</b> Specified in 1/8 Watt increments.
+ Range 0-1024 Watts. Value of 800 = 100W
+**/
+ UINT16 PsysPmax;
+
+/** Offset 0x0858 - Interrupt Response Time Limit of C-State LatencyContol0
+ Interrupt Response Time Limit of C-State LatencyContol0.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl0Irtl;
+
+/** Offset 0x085A - Interrupt Response Time Limit of C-State LatencyContol1
+ Interrupt Response Time Limit of C-State LatencyContol1.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl1Irtl;
+
+/** Offset 0x085C - Interrupt Response Time Limit of C-State LatencyContol2
+ Interrupt Response Time Limit of C-State LatencyContol2.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl2Irtl;
+
+/** Offset 0x085E - Interrupt Response Time Limit of C-State LatencyContol3
+ Interrupt Response Time Limit of C-State LatencyContol3.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl3Irtl;
+
+/** Offset 0x0860 - Interrupt Response Time Limit of C-State LatencyContol4
+ Interrupt Response Time Limit of C-State LatencyContol4.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl4Irtl;
+
+/** Offset 0x0862 - Interrupt Response Time Limit of C-State LatencyContol5
+ Interrupt Response Time Limit of C-State LatencyContol5.Range of value 0 to 0x3FF
+**/
+ UINT16 CstateLatencyControl5Irtl;
+
+/** Offset 0x0864 - Package Long duration turbo mode power limit
+ Package Long duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.
+ Valid Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit1;
+
+/** Offset 0x0868 - Package Short duration turbo mode power limit
+ Package Short duration turbo mode power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit2Power;
+
+/** Offset 0x086C - Package PL3 power limit
+ Package PL3 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 PowerLimit3;
+
+/** Offset 0x0870 - Package PL4 power limit
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 PowerLimit4;
+
+/** Offset 0x0874 - Tcc Offset Time Window for RATL
+ Package PL4 power limit. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 1023875 in Step size of 125
+**/
+ UINT32 TccOffsetTimeWindowForRatl;
+
+/** Offset 0x0878 - Short term Power Limit value for custom cTDP level 1
+ Short term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit1;
+
+/** Offset 0x087C - Long term Power Limit value for custom cTDP level 1
+ Long term Power Limit value for custom cTDP level 1. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom1PowerLimit2;
+
+/** Offset 0x0880 - Short term Power Limit value for custom cTDP level 2
+ Short term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit1;
+
+/** Offset 0x0884 - Long term Power Limit value for custom cTDP level 2
+ Long term Power Limit value for custom cTDP level 2. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom2PowerLimit2;
+
+/** Offset 0x0888 - Short term Power Limit value for custom cTDP level 3
+ Short term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit1;
+
+/** Offset 0x088C - Long term Power Limit value for custom cTDP level 3
+ Long term Power Limit value for custom cTDP level 3. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid
+ Range 0 to 4095875 in Step size of 125
+**/
+ UINT32 Custom3PowerLimit2;
+
+/** Offset 0x0890 - Platform PL1 power
+ Platform PL1 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit1Power;
+
+/** Offset 0x0894 - Platform PL2 power
+ Platform PL2 power. Units are based on POWER_MGMT_CONFIG.CustomPowerUnit.Valid Range
+ 0 to 4095875 in Step size of 125
+**/
+ UINT32 PsysPowerLimit2Power;
+
+/** Offset 0x0898 - Set Three Strike Counter Disable
+ False (default): Three Strike counter will be incremented and True: Prevents Three
+ Strike counter from incrementing; <b>0: False</b>; 1: True.
+ 0: False, 1: True
+**/
+ UINT8 ThreeStrikeCounterDisable;
+
+/** Offset 0x0899 - Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT
+ Set HW P-State Interrupts Enabled for for MISC_PWR_MGMT; <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 HwpInterruptControl;
+
+/** Offset 0x089A - 5-Core Ratio Limit
+ 5-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 5-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 FiveCoreRatioLimit;
+
+/** Offset 0x089B - 6-Core Ratio Limit
+ 6-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 6-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 SixCoreRatioLimit;
+
+/** Offset 0x089C - 7-Core Ratio Limit
+ 7-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 7-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 SevenCoreRatioLimit;
+
+/** Offset 0x089D - 8-Core Ratio Limit
+ 8-Core Ratio Limit: LFM to Fused, For overclocking part: LFM to 255. This 8-Core
+ Ratio Limit Must be Less than or equal to 1-Core Ratio Limit.Range is 0 to 255
+ 0x0:0xFF
+**/
+ UINT8 EightCoreRatioLimit;
+
+/** Offset 0x089E - Intel Turbo Boost Max Technology 3.0
+ Intel Turbo Boost Max Technology 3.0. 0: Disabled; <b>1: Enabled</b>
+ $EN_DIS
+**/
+ UINT8 EnableItbm;
+
+/** Offset 0x089F - Intel Turbo Boost Max Technology 3.0 Driver
+ Intel Turbo Boost Max Technology 3.0 Driver <b>0: Disabled</b>; 1: Enabled
+ $EN_DIS
+**/
+ UINT8 EnableItbmDriver;
+
+/** Offset 0x08A0 - Enable or Disable C1 Cstate Demotion
+ Enable or Disable C1 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateAutoDemotion;
+
+/** Offset 0x08A1 - Enable or Disable C1 Cstate UnDemotion
+ Enable or Disable C1 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C1StateUnDemotion;
+
+/** Offset 0x08A2 - CpuWakeUpTimer
+ Enable long CPU Wakeup Timer. When enabled, the cpu internal wakeup time is increased
+ to 180 seconds. 0: Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 CpuWakeUpTimer;
+
+/** Offset 0x08A3 - Minimum Ring ratio limit override
+ Minimum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MinRingRatioLimit;
+
+/** Offset 0x08A4 - Minimum Ring ratio limit override
+ Maximum Ring ratio limit override. <b>0: Hardware defaults.</b> Range: 0 - Max turbo
+ ratio limit
+**/
+ UINT8 MaxRingRatioLimit;
+
+/** Offset 0x08A5 - Enable or Disable C3 Cstate Demotion
+ Enable or Disable C3 Cstate Demotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C3StateAutoDemotion;
+
+/** Offset 0x08A6 - Enable or Disable C3 Cstate UnDemotion
+ Enable or Disable C3 Cstate UnDemotion. Disable; <b>1: Enable</b>
+ $EN_DIS
+**/
+ UINT8 C3StateUnDemotion;
+
+/** Offset 0x08A7 - ReservedCpuPostMemTest
+ Reserved for CPU Post-Mem Test
+ $EN_DIS
+**/
+ UINT8 ReservedCpuPostMemTest[19];
+
+/** Offset 0x08BA - SgxSinitDataFromTpm
+ SgxSinitDataFromTpm default values
+**/
+ UINT8 SgxSinitDataFromTpm;
+
+/** Offset 0x08BB - End of Post message
+ Test, Send End of Post message. Disable(0x0): Disable EOP message, Send in PEI(0x1):
+ EOP send in PEI, Send in DXE(0x2)(Default): EOP send in PEI
+ 0:Disable, 1:Send in PEI, 2:Send in DXE, 3:Reserved
+**/
+ UINT8 EndOfPostMessage;
+
+/** Offset 0x08BC - D0I3 Setting for HECI Disable
+ Test, 0: disable, 1: enable, Setting this option disables setting D0I3 bit for all
+ HECI devices
+ $EN_DIS
+**/
+ UINT8 DisableD0I3SettingForHeci;
+
+/** Offset 0x08BD - HD Audio Reset Wait Timer
+ The delay timer after Azalia reset, the value is number of microseconds. Default is 600.
+**/
+ UINT16 PchHdaResetWaitTimer;
+
+/** Offset 0x08BF - Enable LOCKDOWN SMI
+ Enable SMI_LOCK bit to prevent writes to the Global SMI Enable bit.
+ $EN_DIS
+**/
+ UINT8 PchLockDownGlobalSmi;
+
+/** Offset 0x08C0 - Enable LOCKDOWN BIOS Interface
+ Enable BIOS Interface Lock Down bit to prevent writes to the Backup Control Register.
+ $EN_DIS
+**/
+ UINT8 PchLockDownBiosInterface;
+
+/** Offset 0x08C1 - Unlock all GPIO pads
+ Force all GPIO pads to be unlocked for debug purpose.
+ $EN_DIS
+**/
+ UINT8 PchUnlockGpioPads;
+
+/** Offset 0x08C2 - PCH Unlock SBI access
+ Deprecated
+ $EN_DIS
+**/
+ UINT8 PchSbiUnlock;
+
+/** Offset 0x08C3 - PCH Unlock SideBand access
+ The SideBand PortID mask for certain end point (e.g. PSFx) will be locked before
+ 3rd party code execution. 0: Lock SideBand access; 1: Unlock SideBand access.
+ $EN_DIS
+**/
+ UINT8 PchSbAccessUnlock;
+
+/** Offset 0x08C4 - PCIE RP Ltr Max Snoop Latency
+ Latency Tolerance Reporting, Max Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxSnoopLatency[24];
+
+/** Offset 0x08F4 - PCIE RP Ltr Max No Snoop Latency
+ Latency Tolerance Reporting, Max Non-Snoop Latency.
+**/
+ UINT16 PcieRpLtrMaxNoSnoopLatency[24];
+
+/** Offset 0x0924 - PCIE RP Snoop Latency Override Mode
+ Latency Tolerance Reporting, Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMode[24];
+
+/** Offset 0x093C - PCIE RP Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x0954 - PCIE RP Snoop Latency Override Value
+ Latency Tolerance Reporting, Snoop Latency Override Value.
+**/
+ UINT16 PcieRpSnoopLatencyOverrideValue[24];
+
+/** Offset 0x0984 - PCIE RP Non Snoop Latency Override Mode
+ Latency Tolerance Reporting, Non-Snoop Latency Override Mode.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMode[24];
+
+/** Offset 0x099C - PCIE RP Non Snoop Latency Override Multiplier
+ Latency Tolerance Reporting, Non-Snoop Latency Override Multiplier.
+**/
+ UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[24];
+
+/** Offset 0x09B4 - PCIE RP Non Snoop Latency Override Value
+ Latency Tolerance Reporting, Non-Snoop Latency Override Value.
+**/
+ UINT16 PcieRpNonSnoopLatencyOverrideValue[24];
+
+/** Offset 0x09E4 - PCIE RP Slot Power Limit Scale
+ Specifies scale used for slot power limit value. Leave as 0 to set to default.
+**/
+ UINT8 PcieRpSlotPowerLimitScale[24];
+
+/** Offset 0x09FC - PCIE RP Slot Power Limit Value
+ Specifies upper limit on power supplie by slot. Leave as 0 to set to default.
+**/
+ UINT16 PcieRpSlotPowerLimitValue[24];
+
+/** Offset 0x0A2C - PCIE RP Upstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 5.
+**/
+ UINT8 PcieRpUptp[24];
+
+/** Offset 0x0A44 - PCIE RP Downstream Port Transmiter Preset
+ Used during Gen3 Link Equalization. Used for all lanes. Default is 7.
+**/
+ UINT8 PcieRpDptp[24];
+
+/** Offset 0x0A5C - PCIE RP Enable Port8xh Decode
+ This member describes whether PCIE root port Port 8xh Decode is enabled. 0: Disable;
+ 1: Enable.
+ $EN_DIS
+**/
+ UINT8 PcieEnablePort8xhDecode;
+
+/** Offset 0x0A5D - PCIE Port8xh Decode Port Index
+ The Index of PCIe Port that is selected for Port8xh Decode (0 Based).
+**/
+ UINT8 PchPciePort8xhDecodePortIndex;
+
+/** Offset 0x0A5E - PCH Energy Reporting
+ Disable/Enable PCH to CPU energy report feature.
+ $EN_DIS
+**/
+ UINT8 PchPmDisableEnergyReport;
+
+/** Offset 0x0A5F - PCH Sata Test Mode
+ Allow entrance to the PCH SATA test modes.
+ $EN_DIS
+**/
+ UINT8 SataTestMode;
+
+/** Offset 0x0A60 - PCH USB OverCurrent mapping lock enable
+ If this policy option is enabled then BIOS will program OCCFDONE bit in xHCI meaning
+ that OC mapping data will be consumed by xHCI and OC mapping registers will be locked.
+ $EN_DIS
+**/
+ UINT8 PchXhciOcLock;
+
+/** Offset 0x0A61
+**/
+ UINT8 UnusedUpdSpace24[17];
+
+/** Offset 0x0A72 - Skip POSTBOOT SAI
+ Deprecated
+ $EN_DIS
+**/
+ UINT8 SkipPostBootSai;
+
+/** Offset 0x0A73 - Mctp Broadcast Cycle
+ Test, Determine if MCTP Broadcast is enabled <b>0: Disable</b>; 1: Enable.
+ $EN_DIS
+**/
+ UINT8 MctpBroadcastCycle;
+
+/** Offset 0x0A74
+**/
+ UINT8 ReservedFspsTestUpd[12];
+} FSP_S_TEST_CONFIG;
+
+/** Fsp S UPD Configuration
+**/
+typedef struct {
+
+/** Offset 0x0000
+**/
+ FSP_UPD_HEADER FspUpdHeader;
+
+/** Offset 0x0020
+**/
+ FSP_S_CONFIG FspsConfig;
+
+/** Offset 0x07AD
+**/
+ FSP_S_TEST_CONFIG FspsTestConfig;
+
+/** Offset 0x0A80
+**/
+ UINT16 UpdTerminator;
+} FSPS_UPD;
+
+#pragma pack()
+
+#endif