mainboard/kontron/986lcd-m: Use tabs for indents

Change-Id: Ibeb0da2f75b4aec32f5238e5634bc1f1d8220b84
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/16820
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

1 files changed, 49 insertions, 49 deletions

diff --git a/src/mainboard/kontron/986lcd-m/devicetree.cb b/src/mainboard/kontron/986lcd-m/devicetree.cb
index b9ddf75fb1..6795cdc38e 100644
--- a/src/mainboard/kontron/986lcd-m/devicetree.cb
+++ b/src/mainboard/kontron/986lcd-m/devicetree.cb
@@ -3,19 +3,19 @@ chip northbridge/intel/i945
 	register "gfx.ndid" = "3"
 	register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
 
-        device cpu_cluster 0 on
-                chip cpu/intel/socket_mFCPGA478
-                        device lapic 0 on end
-                end
-        end
+	device cpu_cluster 0 on
+		chip cpu/intel/socket_mFCPGA478
+			device lapic 0 on end
+		end
+	end
 
-        device domain 0 on
-                device pci 00.0 on end # host bridge
+	device domain 0 on
+		device pci 00.0 on end # host bridge
 		device pci 01.0 off end # i945 PCIe root port
 		device pci 02.0 on end # vga controller
 		device pci 02.1 on end # display controller
 
-                chip southbridge/intel/i82801gx
+		chip southbridge/intel/i82801gx
 			register "pirqa_routing" = "0x0b"
 			register "pirqb_routing" = "0x0b"
 			register "pirqc_routing" = "0x0b"
@@ -31,45 +31,45 @@ chip northbridge/intel/i945
 			#  2 SCI (if corresponding GPIO_EN bit is also set)
 			register "gpi13_routing" = "1"
 
-                        register "ide_legacy_combined" = "0x1"
-                        register "ide_enable_primary" = "0x1"
-                        register "ide_enable_secondary" = "0x1"
-                        register "sata_ahci" = "0x0"
+			register "ide_legacy_combined" = "0x1"
+			register "ide_enable_primary" = "0x1"
+			register "ide_enable_secondary" = "0x1"
+			register "sata_ahci" = "0x0"
 			register "c3_latency" = "85"
 			register "p_cnt_throttling_supported" = "0"
 
-                	device pci 1b.0 on end # High Definition Audio
-                	device pci 1c.0 on end # PCIe
-                	device pci 1c.1 on end # PCIe
-                	device pci 1c.2 on end # PCIe
+			device pci 1b.0 on end # High Definition Audio
+			device pci 1c.0 on end # PCIe
+			device pci 1c.1 on end # PCIe
+			device pci 1c.2 on end # PCIe
 			#device pci 1c.3 off end # PCIe port 4
 			#device pci 1c.4 off end # PCIe port 5
 			#device pci 1c.5 off end # PCIe port 6
-                	device pci 1d.0 on end # USB UHCI
-                	device pci 1d.1 on end # USB UHCI
-                	device pci 1d.2 on end # USB UHCI
-                	device pci 1d.3 on end # USB UHCI
-                	device pci 1d.7 on end # USB2 EHCI
-                	device pci 1e.0 on end # PCI bridge
+			device pci 1d.0 on end # USB UHCI
+			device pci 1d.1 on end # USB UHCI
+			device pci 1d.2 on end # USB UHCI
+			device pci 1d.3 on end # USB UHCI
+			device pci 1d.7 on end # USB2 EHCI
+			device pci 1e.0 on end # PCI bridge
 			#device pci 1e.2 off end # AC'97 Audio
 			#device pci 1e.3 off end # AC'97 Modem
-                        device pci 1f.0 on # LPC bridge
-                                chip superio/winbond/w83627thg
+			device pci 1f.0 on # LPC bridge
+				chip superio/winbond/w83627thg
 					device pnp 2e.0 off		# Floppy
 					end
 					device pnp 2e.1 on		# Parallel port
 						 io 0x60 = 0x378
 						irq 0x70 = 5
 					end
-                                        device pnp 2e.2 on
-                                                 io 0x60 = 0x3f8
-                                                irq 0x70 = 4
-                                        end
-                                        device pnp 2e.3 on
-                                                 io 0x60 = 0x2f8
-                                                irq 0x70 = 3
+					device pnp 2e.2 on
+						 io 0x60 = 0x3f8
+						irq 0x70 = 4
+					end
+					device pnp 2e.3 on
+						io 0x60 = 0x2f8
+						irq 0x70 = 3
 						irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
-                                        end
+					end
 					device pnp 2e.5 on		# Keyboard+Mouse
 						 io 0x60 = 0x60
 						 io 0x62 = 0x64
@@ -96,21 +96,21 @@ chip northbridge/intel/i945
 						irq 0x70 = 0
 					end
 
-                                end
-                                chip superio/winbond/w83627thg
-                                        device pnp 4e.0 off		# Floppy
+				end
+				chip superio/winbond/w83627thg
+					device pnp 4e.0 off		# Floppy
 					end
 					device pnp 4e.1 off		# Parport
 					end
-                                        device pnp 4e.2 on		# COM3
-                                                 io 0x60 = 0x3e8
-                                                irq 0x70 = 6
-                                        end
-                                        device pnp 4e.3 on		# COM4
-                                                 io 0x60 = 0x2e8
-                                                irq 0x70 = 6
+					device pnp 4e.2 on		# COM3
+						 io 0x60 = 0x3e8
+						irq 0x70 = 6
+					end
+					device pnp 4e.3 on		# COM4
+						 io 0x60 = 0x2e8
+						irq 0x70 = 6
 						irq 0xf1 = 4 # set IRMODE 0 # XXX not an irq
-                                        end
+					end
 					device pnp 4e.5 off		# Keyboard
 					end
 					device pnp 4e.7 off		# GPIO1, GAME, MIDI
@@ -123,13 +123,13 @@ chip northbridge/intel/i945
 					end
 					device pnp 4e.b off		# HWM
 					end
-                                end
+				end
 
-                        end
+			end
 			#device pci 1f.1 off end # IDE
-                        device pci 1f.2 on end  # SATA
-                        device pci 1f.3 on end  # SMBus
+			device pci 1f.2 on end  # SATA
+			device pci 1f.3 on end  # SMBus
 			#device pci 1f.4 off end # Realtek ID Codec
-                end
-        end
+		end
+	end
 end