summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNils Jacobs <njacobs8@hetnet.nl>2010-11-01 14:39:49 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-11-01 14:39:49 +0000
commit96446239346128308a9f8500c4018aae579a876d (patch)
tree2eb42006ae0f72118bea9946c5ad3a0e100d7337
parent809e29ec8fdf49f65f87076005bbc778b9f10caa (diff)
downloadcoreboot-96446239346128308a9f8500c4018aae579a876d.tar.xz
Remove some unused code.
Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6010 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/northbridge/amd/gx2/pll_reset.c173
1 files changed, 2 insertions, 171 deletions
diff --git a/src/northbridge/amd/gx2/pll_reset.c b/src/northbridge/amd/gx2/pll_reset.c
index 19b0946346..f9e780cb61 100644
--- a/src/northbridge/amd/gx2/pll_reset.c
+++ b/src/northbridge/amd/gx2/pll_reset.c
@@ -24,69 +24,6 @@
#define CALIBRATE_INTERVAL ((20*CLOCK_TICK_RATE)/1000) /* 20ms */
#define CALIBRATE_DIVISOR (20*1000) /* 20ms / 20000 == 1usec */
-#if 0
-static unsigned int calibrate_tsc(void)
-{
- /* Set the Gate high, disable speaker */
- outb((inb(0x61) & ~0x02) | 0x01, 0x61);
-
- /*
- * Now let's take care of CTC channel 2
- *
- * Set the Gate high, program CTC channel 2 for mode 0,
- * (interrupt on terminal count mode), binary count,
- * load 5 * LATCH count, (LSB and MSB) to begin countdown.
- */
- outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
- outb(CALIBRATE_INTERVAL & 0xff, 0x42); /* LSB of count */
- outb(CALIBRATE_INTERVAL >> 8, 0x42); /* MSB of count */
-
- {
- tsc_t start;
- tsc_t end;
- unsigned long count;
-
- start = rdtsc();
- count = 0;
- do {
- count++;
- } while ((inb(0x61) & 0x20) == 0);
- end = rdtsc();
-
- /* Error: ECTCNEVERSET */
- if (count <= 1)
- goto bad_ctc;
-
- /* 64-bit subtract - gcc just messes up with long longs */
- __asm__("subl %2,%0\n\t"
- "sbbl %3,%1"
- :"=a" (end.lo), "=d" (end.hi)
- :"g" (start.lo), "g" (start.hi),
- "0" (end.lo), "1" (end.hi));
-
- /* Error: ECPUTOOFAST */
- if (end.hi)
- goto bad_ctc;
-
-
- /* Error: ECPUTOOSLOW */
- if (end.lo <= CALIBRATE_DIVISOR)
- goto bad_ctc;
-
- return (end.lo + CALIBRATE_DIVISOR -1)/CALIBRATE_DIVISOR;
- }
-
- /*
- * The CTC wasn't reliable: we got a hit on the very first read,
- * or the CPU was so fast/slow that the quotient wouldn't fit in
- * 32 bits..
- */
-bad_ctc:
- print_err("bad_ctc\n");
- return 0;
-}
-#endif
-
/* spll_raw_clk = SYSREF * FbDIV,
* GLIU Clock = spll_raw_clk / MDIV
* CPU Clock = spll_raw_clk / VDIV
@@ -108,17 +45,6 @@ static const unsigned char fbdiv2plldiv[] = {
49, 40, 19, 59, 32, 54, 35, 0, 41, 60, 55, 0, 61, 0, 0, 0
};
-static const unsigned char pci33_ddr_crt [] = {
- /* FbDIV, VDIV, MDIV CPU/GeodeLink */
- 12, 2, 3, // 200/133
- 16, 2, 3, // 266/177
- 18, 2, 3, // 300/200
- 20, 2, 3, // 333/222
- 22, 2, 3, // 366/244
- 24, 2, 3, // 400/266
- 26, 2, 3 // 433/289
-};
-
/* FbDIV VDIV MDIV CPU/GeodeLink */
/* 12 2 3 200/133 */
/* 16 2 3 266/177 */
@@ -128,31 +54,12 @@ static const unsigned char pci33_ddr_crt [] = {
/* 24 2 3 400/266 */
/* 26 2 3 433/289 */
-#if 0
-static unsigned int get_memory_speed(void)
-{
- unsigned char val, hi, lo;
-
- val = spd_read_byte(0xA0, 9);
- hi = (val >> 4) & 0x0f;
- lo = val & 0x0f;
-
- return 20000/(hi*10 + lo);
-}
-#endif
-
-#define USE_GOODRICH_VERSION 1
-
-#if USE_GOODRICH_VERSION
-///////////////////////////////////////////////////////////////////////////////
-// Goodrich Version of pll_reset
-
/* PLLCHECK_COMPLETED is the "we've already done this" flag */
#define PLLCHECK_COMPLETED (1 << RSTPLL_LOWER_SWFLAGS_SHIFT)
#ifndef RSTPPL_LOWER_BYPASS_SET
#define RSTPPL_LOWER_BYPASS_SET (1 << GLCP_SYS_RSTPLL_BYPASS)
-#endif /* RSTPPL_LOWER_BYPASS_SET */
+#endif // RSTPPL_LOWER_BYPASS_SET
#define DEFAULT_MDIV 3
#define DEFAULT_VDIV 2
@@ -218,7 +125,7 @@ static void pll_reset(void)
/* CheckSemiSync proc */
/* Check for Semi-Sync in GeodeLink and CPU. */
/* We need to do this here since the strap settings don't account for these bits. */
- SyncBits = 0; // store the sync bits in up ebx
+ SyncBits = 0; /* store the sync bits in up ebx */
/* Check for Bypass mode. */
if (msrGlcpSysRstpll.lo & RSTPPL_LOWER_BYPASS_SET)
@@ -247,7 +154,6 @@ static void pll_reset(void)
}
}
-
/* SetSync: */
msrGlcpSysRstpll.lo &= ~(RSTPPL_LOWER_PCI_SEMI_SYNC_SET | RSTPPL_LOWER_CPU_SEMI_SYNC_SET);
msrGlcpSysRstpll.lo |= SyncBits;
@@ -273,78 +179,3 @@ static void pll_reset(void)
} /* we haven't configured the PLL; do it now */
}
-// End of Goodrich version of pll_reset
-///////////////////////////////////////////////////////////////////////////////
-
-#else // #if USE_GOODRICH_VERSION
-
-static void pll_reset(void)
-{
- msr_t msr;
- unsigned int sysref, spll_raw, cpu_core, gliu;
- unsigned mdiv, vdiv, fbdiv;
-
- /* get CPU core clock in MHZ */
- cpu_core = calibrate_tsc();
- print_debug("Cpu core is ");
- print_debug_hex32(cpu_core);
- print_debug("\n");
-
- msr = rdmsr(GLCP_SYS_RSTPLL);
- if (msr.lo & (1 << GLCP_SYS_RSTPLL_BYPASS)) {
-#if 0
- print_debug("MSR ");
- print_debug_hex32(GLCP_SYS_RSTPLL);
- print_debug("is ");
- print_debug_hex32(msr.hi);
- print_debug(":");
- print_debug_hex32(msr.lo);
-
- msr.hi = PLLMSRhi;
- msr.lo = PLLMSRlo;
- wrmsr(GLCP_SYS_RSTPLL, msr);
- msr.lo |= PLLMSRlo1;
- wrmsr(GLCP_SYS_RSTPLL, msr);
-
- print_debug("Reset PLL\n");
-
- msr.lo |= PLLMSRlo2;
- wrmsr(GLCP_SYS_RSTPLL,msr);
- print_debug("should not be here\n");
-#endif
- print_err("shit");
- while (1)
- ;
- }
-
- if (msr.lo & GLCP_SYS_RSTPLL_SWFLAGS_MASK) {
- /* PLL is already set and we are reboot from PLL reset */
- print_debug("reboot from BIOS reset\n");
- return;
- }
-
- /* get the sysref clock rate */
- vdiv = (msr.hi >> GLCP_SYS_RSTPLL_VDIV_SHIFT) & 0x07;
- vdiv += 2;
- fbdiv = (msr.hi >> GLCP_SYS_RSTPLL_FBDIV_SHIFT) & 0x3f;
- fbdiv = fbdiv2plldiv[fbdiv];
- spll_raw = cpu_core * vdiv;
- sysref = spll_raw / fbdiv;
-
- /* get target memory rate by SPD */
- //gliu = get_memory_speed();
-
- msr.hi = 0x00000019;
- msr.lo = 0x06de0378;
- wrmsr(0x4c000014, msr);
- msr.lo |= ((0xde << 16) | (1 << 26) | (1 << 24));
- wrmsr(0x4c000014, msr);
-
- print_debug("Reset PLL\n");
-
- msr.lo |= ((1<<14) |(1<<13) | (1<<0));
- wrmsr(0x4c000014,msr);
-
- print_debug("should not be here\n");
-}
-#endif // #if USE_GOODRICH_VERSION