summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAaron Durbin <adurbin@chromium.org>2015-08-07 22:29:42 -0500
committerAaron Durbin <adurbin@chromium.org>2015-08-14 15:20:10 +0200
commit9a8dc37cdd9486926c6b5416dd48f4f075b2612d (patch)
tree9ffb787910a9361d1024397c99ec7654a99a91af
parent799bf781fdc71baa2332fc75f2a382c15f2ce321 (diff)
downloadcoreboot-9a8dc37cdd9486926c6b5416dd48f4f075b2612d.tar.xz
skylake: provide GPE0 routing devicetree configuration
On skylake the GPE0 routing can be dynamically changed to a particular GPIO group. Provide the ability for the mainboard to set the route accordingly. If any of the values in the devicetree are the same the current setting in the PMC register is used. The GPIO communities need to have matching configuration for the plumbing to work properly. BUG=chrome-os-partner:43778 BRANCH=None TEST=Built and booted glados w/ and w/o devicetree changes. Fields are set accordingly. Original-Change-Id: I263d648c8ea8a70b21570f01b333d05a5fa2a4e3 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/291930 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Change-Id: I966d38bc197dbb52a2ba50927c06e243e169afbe Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11203 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
-rw-r--r--src/soc/intel/skylake/chip.h21
-rw-r--r--src/soc/intel/skylake/gpio.c23
-rw-r--r--src/soc/intel/skylake/include/soc/gpio.h9
-rw-r--r--src/soc/intel/skylake/include/soc/gpio_defs.h31
-rw-r--r--src/soc/intel/skylake/include/soc/pmc.h5
-rw-r--r--src/soc/intel/skylake/pmc.c43
6 files changed, 118 insertions, 14 deletions
diff --git a/src/soc/intel/skylake/chip.h b/src/soc/intel/skylake/chip.h
index 96389a9471..873342ae47 100644
--- a/src/soc/intel/skylake/chip.h
+++ b/src/soc/intel/skylake/chip.h
@@ -19,14 +19,16 @@
* Foundation, Inc.
*/
+
+#ifndef _SOC_CHIP_H_
+#define _SOC_CHIP_H_
+
#include <stdint.h>
+#include <soc/gpio_defs.h>
#include <soc/pci_devs.h>
#include <soc/pmc.h>
#include <soc/serialio.h>
-#ifndef _SOC_CHIP_H_
-#define _SOC_CHIP_H_
-
struct soc_intel_skylake_config {
/*
* Interrupt Routing configuration
@@ -42,10 +44,15 @@ struct soc_intel_skylake_config {
uint8_t pirqh_routing;
/* GPE configuration */
- uint32_t gpe0_en_1;
- uint32_t gpe0_en_2;
- uint32_t gpe0_en_3;
- uint32_t gpe0_en_4;
+ uint32_t gpe0_en_1; /* GPE0_EN_31_0 */
+ uint32_t gpe0_en_2; /* GPE0_EN_63_32 */
+ uint32_t gpe0_en_3; /* GPE0_EN_95_64 */
+ uint32_t gpe0_en_4; /* GPE0_EN_127_96 / GPE_STD */
+ /* Gpio group routed to each dword of the GPE0 block. Values are
+ * of the form GPP_[A:G] or GPD. */
+ uint8_t gpe0_dw0; /* GPE0_31_0 STS/EN */
+ uint8_t gpe0_dw1; /* GPE0_63_32 STS/EN */
+ uint8_t gpe0_dw2; /* GPE0_95_64 STS/EN */
/* GPIO SMI configuration */
uint32_t ec_smi_gpio;
diff --git a/src/soc/intel/skylake/gpio.c b/src/soc/intel/skylake/gpio.c
index 28ed07ebd3..18638873f7 100644
--- a/src/soc/intel/skylake/gpio.c
+++ b/src/soc/intel/skylake/gpio.c
@@ -71,6 +71,29 @@ static const struct gpio_community *gpio_get_community(gpio_t pad)
return NULL;
}
+void gpio_route_gpe(uint16_t gpe0_route)
+{
+ int i;
+ uint32_t misc_cfg;
+ const uint32_t misc_cfg_reg_mask = GPE_DW_MASK;
+
+ misc_cfg = (uint32_t)gpe0_route << GPE_DW_SHIFT;
+ misc_cfg &= misc_cfg_reg_mask;
+
+ for (i = 0; i < ARRAY_SIZE(communities); i++) {
+ uint8_t *regs;
+ uint32_t reg;
+ const struct gpio_community *comm = &communities[i];
+
+ regs = pcr_port_regs(comm->port_id);
+
+ reg = read32(regs + MISCCFG_OFFSET);
+ reg &= ~misc_cfg_reg_mask;
+ reg |= misc_cfg;
+ write32(regs + MISCCFG_OFFSET, reg);
+ }
+}
+
static void *gpio_dw_regs(gpio_t pad)
{
const struct gpio_community *comm;
diff --git a/src/soc/intel/skylake/include/soc/gpio.h b/src/soc/intel/skylake/include/soc/gpio.h
index a7d9158ed5..321f04c5d3 100644
--- a/src/soc/intel/skylake/include/soc/gpio.h
+++ b/src/soc/intel/skylake/include/soc/gpio.h
@@ -43,6 +43,15 @@ void gpio_enable_all_smi(void);
/* Enable GPIO individual Group SMI */
void gpio_enable_groupsmi(gpio_t gpio_num, u32 mask);
+/*
+ * Set the GPIO groups for the GPE blocks. The gpe0_route is interpreted
+ * as the packed configuration for GPE0_DW[2:0]:
+ * dw0 = gpe0_route[3:0]
+ * dw1 = gpe0_route[7:4]
+ * dw2 = gpe0_route[11:8].
+ */
+void gpio_route_gpe(uint16_t gpe0_route);
+
/* Configure the pads according to the pad_config array. */
struct pad_config;
void gpio_configure_pads(const struct pad_config *cfgs, size_t num);
diff --git a/src/soc/intel/skylake/include/soc/gpio_defs.h b/src/soc/intel/skylake/include/soc/gpio_defs.h
index 625acdb74e..09f50199f6 100644
--- a/src/soc/intel/skylake/include/soc/gpio_defs.h
+++ b/src/soc/intel/skylake/include/soc/gpio_defs.h
@@ -21,6 +21,23 @@
#define _SOC_GPIO_DEFS_H_
/*
+ * There are 8 GPIO groups. GPP_A -> GPP_G and GPD. GPD is the special case
+ * where that group is not so generic. So most of the fixed numbers and macros
+ * are based on the GPP groups. The GPIO groups are accessed through register
+ * blocks called communities.
+ */
+#define GPP_A 0
+#define GPP_B 1
+#define GPP_C 2
+#define GPP_D 3
+#define GPP_E 4
+#define GPP_F 5
+#define GPP_G 6
+#define GPD 7
+#define GPIO_NUM_GROUPS 8
+#define GPIO_MAX_NUM_PER_GROUP 24
+
+/*
* GPIOs are ordered monotonically increasing to match ACPI/OS driver.
*/
@@ -375,6 +392,12 @@
#define GPD11_IRQ 0x5b
/* Register defines. */
+#define MISCCFG_OFFSET 0x10
+#define GPIO_DRIVER_IRQ_ROUTE_MASK 8
+#define GPIO_DRIVER_IRQ_ROUTE_IRQ14 0
+#define GPIO_DRIVER_IRQ_ROUTE_IRQ15 8
+#define GPE_DW_SHIFT 8
+#define GPE_DW_MASK 0xfff00
#define PAD_OWN_REG_OFFSET 0x20
#define PAD_OWN_PADS_PER 8
#define PAD_OWN_WIDTH_PER 4
@@ -476,9 +499,9 @@
#define PAD_TERM_667_PU 13
#define PAD_TERM_NATIVE 15
-#define MISCCFG_OFFSET 0x10
-#define GPIO_DRIVER_IRQ_ROUTE_MASK 8
-#define GPIO_DRIVER_IRQ_ROUTE_IRQ14 0
-#define GPIO_DRIVER_IRQ_ROUTE_IRQ15 8
+#define GPI_GPE_STS_OFFSET 0x140
+#define GPI_GPE_EN_OFFSET 0x160
+#define GPI_SMI_STS_OFFSET 0x180
+#define GPI_SMI_EN_OFFSET 0x1a0
#endif /* _SOC_GPIO_DEFS_H_ */
diff --git a/src/soc/intel/skylake/include/soc/pmc.h b/src/soc/intel/skylake/include/soc/pmc.h
index 5774d46a4b..9c9b175285 100644
--- a/src/soc/intel/skylake/include/soc/pmc.h
+++ b/src/soc/intel/skylake/include/soc/pmc.h
@@ -91,6 +91,11 @@
#define DSX_EN_LAN_WAKE_PIN (1 << 0)
#define PMSYNC_TPR_CFG 0xc4
#define PMSYNC_LOCK (1 << 31)
+#define GPIO_CFG 0x120
+#define GPE0_DWX_MASK 0xf
+#define GPE0_DW0_SHIFT 0
+#define GPE0_DW1_SHIFT 4
+#define GPE0_DW2_SHIFT 8
#define GBLRST_CAUSE0 0x124
#define GBLRST_CAUSE1 0x128
diff --git a/src/soc/intel/skylake/pmc.c b/src/soc/intel/skylake/pmc.c
index 2c794cabea..b6c35ebb4f 100644
--- a/src/soc/intel/skylake/pmc.c
+++ b/src/soc/intel/skylake/pmc.c
@@ -27,6 +27,7 @@
#include <pc80/mc146818rtc.h>
#include <reg_script.h>
#include <string.h>
+#include <soc/gpio.h>
#include <soc/iomap.h>
#include <soc/pci_devs.h>
#include <soc/pmc.h>
@@ -147,6 +148,42 @@ static void pch_rtc_init(void)
#endif
}
+static void pmc_gpe_init(config_t *config)
+{
+ uint8_t *pmc_regs;
+ uint32_t gpio_cfg;
+ uint32_t gpio_cfg_reg;
+ const uint32_t gpio_cfg_mask =
+ (GPE0_DWX_MASK << GPE0_DW0_SHIFT) |
+ (GPE0_DWX_MASK << GPE0_DW1_SHIFT) |
+ (GPE0_DWX_MASK << GPE0_DW2_SHIFT);
+
+ pmc_regs = pmc_mmio_regs();
+ gpio_cfg = 0;
+
+ /* Route the GPIOs to the GPE0 block. Determine that all values
+ * are different, and if they aren't use the reset values. */
+ if (config->gpe0_dw0 == config->gpe0_dw1 ||
+ config->gpe0_dw1 == config->gpe0_dw2) {
+ printk(BIOS_INFO, "PMC: Using default GPE route.\n");
+ gpio_cfg = read32(pmc_regs + GPIO_CFG);
+ } else {
+ gpio_cfg |= (uint32_t)config->gpe0_dw0 << GPE0_DW0_SHIFT;
+ gpio_cfg |= (uint32_t)config->gpe0_dw1 << GPE0_DW1_SHIFT;
+ gpio_cfg |= (uint32_t)config->gpe0_dw2 << GPE0_DW2_SHIFT;
+ }
+ gpio_cfg_reg = read32(pmc_regs + GPIO_CFG) & ~gpio_cfg_mask;
+ gpio_cfg_reg |= gpio_cfg & gpio_cfg_mask;
+ write32(pmc_regs + GPIO_CFG, gpio_cfg_reg);
+
+ /* Set the routes in the GPIO communities as well. */
+ gpio_route_gpe(gpio_cfg_reg >> GPE0_DW0_SHIFT);
+
+ /* Set GPE enables based on devictree. */
+ enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
+ config->gpe0_en_3, config->gpe0_en_4);
+}
+
static void pch_power_options(void)
{
u16 reg16;
@@ -187,9 +224,9 @@ static void pch_power_options(void)
}
pci_write_config16(dev, GEN_PMCON_B, reg16);
printk(BIOS_INFO, "Set power %s after power failure.\n", state);
- /* GPE setup based on device tree configuration */
- enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
- config->gpe0_en_3, config->gpe0_en_4);
+
+ /* Set up GPE configuration. */
+ pmc_gpe_init(config);
/* SMI setup based on device tree configuration */
enable_alt_smi(config->ec_smi_gpio, config->alt_gp_smi_en);