diff options
| author | Idwer Vollering <vidwer@gmail.com> | 2014-01-06 21:57:56 +0000 |
|---|---|---|
| committer | Rudolf Marek <r.marek@assembler.cz> | 2014-01-15 22:27:21 +0100 |
| commit | c18e52122d6080ea8378c54b759089286736c478 (patch) | |
| tree | 358272840301af1a847c0ab5ecf832100d139a58 | |
| parent | be8d23a3b5f07886edd0d263b75628b75533e6d5 (diff) | |
| download | coreboot-c18e52122d6080ea8378c54b759089286736c478.tar.xz | |
AMD Hudson: show POST codes on a PCI device
Show POST codes on a PCI device: implement hudson_pci_port80().
Remove the comments that use pci_locate_device():
using the code found in the comment seems to break booting.
This shares much code with sb600/sb700/sb800,
however the deduplication work needs to be discusses somewhere else
than in this review board.
Tested on an Asus F2A85-M.
The contribution is (C) by Rudolf Marek.
Change-Id: I54fb1dcb0614452c775ed70d867ab44ff263a61a
Author: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/4559
Tested-by: build bot (Jenkins)
Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
| -rw-r--r-- | src/southbridge/amd/agesa/hudson/early_setup.c | 49 |
1 files changed, 47 insertions, 2 deletions
diff --git a/src/southbridge/amd/agesa/hudson/early_setup.c b/src/southbridge/amd/agesa/hudson/early_setup.c index 96861c99ca..a1295121ce 100644 --- a/src/southbridge/amd/agesa/hudson/early_setup.c +++ b/src/southbridge/amd/agesa/hudson/early_setup.c @@ -29,6 +29,51 @@ #include <cbmem.h> #include "hudson.h" +void hudson_pci_port80(void) +{ + u8 byte; + device_t dev; + + /* P2P Bridge */ + dev = PCI_DEV(0, 0x14, 4); + + /* Chip Control: Enable subtractive decoding */ + byte = pci_read_config8(dev, 0x40); + byte |= 1 << 5; + pci_write_config8(dev, 0x40, byte); + + /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */ + byte = pci_read_config8(dev, 0x4B); + byte |= 1 << 7; + pci_write_config8(dev, 0x4B, byte); + + /* The same IO Base and IO Limit here is meaningful because we set the + * bridge to be subtractive. During early setup stage, we have to make + * sure that data can go through port 0x80. + */ + /* IO Base: 0xf000 */ + byte = pci_read_config8(dev, 0x1C); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1C, byte); + + /* IO Limit: 0xf000 */ + byte = pci_read_config8(dev, 0x1D); + byte |= 0xF << 4; + pci_write_config8(dev, 0x1D, byte); + + /* PCI Command: Enable IO response */ + byte = pci_read_config8(dev, 0x04); + byte |= 1 << 0; + pci_write_config8(dev, 0x04, byte); + + /* LPC controller */ + dev = PCI_DEV(0, 0x14, 3); + + byte = pci_read_config8(dev, 0x4A); + byte &= ~(1 << 5); /* disable lpc port 80 */ + pci_write_config8(dev, 0x4A, byte); +} + void hudson_lpc_port80(void) { u8 byte; @@ -42,9 +87,9 @@ void hudson_lpc_port80(void) outb(byte, 0xCD7); /* Enable port 80 LPC decode in pci function 3 configuration space. */ - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + dev = PCI_DEV(0, 0x14, 3); byte = pci_read_config8(dev, 0x4a); - byte |= 1 << 5; /* enable port 80 */ + byte |= 1 << 5; /* enable port 80 */ pci_write_config8(dev, 0x4a, byte); } |