USB Debug Port related license header fixes (trivial).

 - Add missing license headers, or missing (C) lines to various files.
   (most are from AMD / Yinghai Lu, based on svn logs)
 
 - src/include/ehci.h was taken from the Linux kernel. Updating it to
   the latest version from git HEAD while I'm at it (build-tested with
   one board). It also sports some new EHCI 1.1 addendum #defines which
   we may or may not need.
   
   This new file also already has a proper GPL header.
 
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

5 files changed, 198 insertions, 105 deletions

diff --git a/src/console/usbdebug_console.c b/src/console/usbdebug_console.c
index 6fe0ef7ee6..2270cebda4 100644
--- a/src/console/usbdebug_console.c
+++ b/src/console/usbdebug_console.c
@@ -1,6 +1,9 @@
 /*
  * This file is part of the coreboot project.
  *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
diff --git a/src/include/ehci.h b/src/include/ehci.h
index ed54b7e347..5dc2bb3935 100644
--- a/src/include/ehci.h
+++ b/src/include/ehci.h
@@ -1,132 +1,201 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * It was taken from the Linux kernel (include/linux/usb/ehci_def.h).
+ *
+ * Copyright (C) 2001-2002 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
 #ifndef EHCI_H
 #define EHCI_H
 
+/* EHCI register interface, corresponds to EHCI Revision 0.95 specification */
+
+/* Section 2.2 Host Controller Capability Registers */
 struct ehci_caps {
-        /* these fields are specified as 8 and 16 bit registers,
-         * but some hosts can't perform 8 or 16 bit PCI accesses.
-         */
-        u32             hc_capbase;
-#define HC_LENGTH(p)            (((p)>>00)&0x00ff)      /* bits 7:0 */
-#define HC_VERSION(p)           (((p)>>16)&0xffff)      /* bits 31:16 */
-        u32             hcs_params;     /* HCSPARAMS - offset 0x4 */
-#define HCS_DEBUG_PORT(p)       (((p)>>20)&0xf) /* bits 23:20, debug port? */
-#define HCS_INDICATOR(p)        ((p)&(1 << 16)) /* true: has port indicators */
-#define HCS_N_CC(p)             (((p)>>12)&0xf) /* bits 15:12, #companion HCs */
-#define HCS_N_PCC(p)            (((p)>>8)&0xf)  /* bits 11:8, ports per CC */
-#define HCS_PORTROUTED(p)       ((p)&(1 << 7))  /* true: port routing */
-#define HCS_PPC(p)              ((p)&(1 << 4))  /* true: port power control */
-#define HCS_N_PORTS(p)          (((p)>>0)&0xf)  /* bits 3:0, ports on HC */
-
-        u32             hcc_params;      /* HCCPARAMS - offset 0x8 */
-#define HCC_EXT_CAPS(p)         (((p)>>8)&0xff) /* for pci extended caps */
+	/* these fields are specified as 8 and 16 bit registers,
+	 * but some hosts can't perform 8 or 16 bit PCI accesses.
+	 */
+	u32		hc_capbase;
+#define HC_LENGTH(p)		(((p)>>00)&0x00ff)	/* bits 7:0 */
+#define HC_VERSION(p)		(((p)>>16)&0xffff)	/* bits 31:16 */
+	u32		hcs_params;     /* HCSPARAMS - offset 0x4 */
+#define HCS_DEBUG_PORT(p)	(((p)>>20)&0xf)	/* bits 23:20, debug port? */
+#define HCS_INDICATOR(p)	((p)&(1 << 16))	/* true: has port indicators */
+#define HCS_N_CC(p)		(((p)>>12)&0xf)	/* bits 15:12, #companion HCs */
+#define HCS_N_PCC(p)		(((p)>>8)&0xf)	/* bits 11:8, ports per CC */
+#define HCS_PORTROUTED(p)	((p)&(1 << 7))	/* true: port routing */
+#define HCS_PPC(p)		((p)&(1 << 4))	/* true: port power control */
+#define HCS_N_PORTS(p)		(((p)>>0)&0xf)	/* bits 3:0, ports on HC */
+
+	u32		hcc_params;      /* HCCPARAMS - offset 0x8 */
+/* EHCI 1.1 addendum */
+#define HCC_32FRAME_PERIODIC_LIST(p)	((p)&(1 << 19))
+#define HCC_PER_PORT_CHANGE_EVENT(p)	((p)&(1 << 18))
+#define HCC_LPM(p)			((p)&(1 << 17))
+#define HCC_HW_PREFETCH(p)		((p)&(1 << 16))
+
+#define HCC_EXT_CAPS(p)		(((p)>>8)&0xff)	/* for pci extended caps */
 #define HCC_ISOC_CACHE(p)       ((p)&(1 << 7))  /* true: can cache isoc frame */
 #define HCC_ISOC_THRES(p)       (((p)>>4)&0x7)  /* bits 6:4, uframes cached */
-#define HCC_CANPARK(p)          ((p)&(1 << 2))  /* true: can park on async qh */
+#define HCC_CANPARK(p)		((p)&(1 << 2))  /* true: can park on async qh */
 #define HCC_PGM_FRAMELISTLEN(p) ((p)&(1 << 1))  /* true: periodic_size changes*/
 #define HCC_64BIT_ADDR(p)       ((p)&(1))       /* true: can use 64-bit addr */
-        u8              portroute [8];   /* nibbles for routing - offset 0xC */
+	u8		portroute[8];	 /* nibbles for routing - offset 0xC */
 } __attribute__ ((packed));
 
+
 /* Section 2.3 Host Controller Operational Registers */
 struct ehci_regs {
 
-        /* USBCMD: offset 0x00 */
-        u32             command;
+	/* USBCMD: offset 0x00 */
+	u32		command;
+
+/* EHCI 1.1 addendum */
+#define CMD_HIRD	(0xf<<24)	/* host initiated resume duration */
+#define CMD_PPCEE	(1<<15)		/* per port change event enable */
+#define CMD_FSP		(1<<14)		/* fully synchronized prefetch */
+#define CMD_ASPE	(1<<13)		/* async schedule prefetch enable */
+#define CMD_PSPE	(1<<12)		/* periodic schedule prefetch enable */
 /* 23:16 is r/w intr rate, in microframes; default "8" == 1/msec */
-#define CMD_PARK        (1<<11)         /* enable "park" on async qh */
-#define CMD_PARK_CNT(c) (((c)>>8)&3)    /* how many transfers to park for */
-#define CMD_LRESET      (1<<7)          /* partial reset (no ports, etc) */
-#define CMD_IAAD        (1<<6)          /* "doorbell" interrupt async advance */
-#define CMD_ASE         (1<<5)          /* async schedule enable */
-#define CMD_PSE         (1<<4)          /* periodic schedule enable */
+#define CMD_PARK	(1<<11)		/* enable "park" on async qh */
+#define CMD_PARK_CNT(c)	(((c)>>8)&3)	/* how many transfers to park for */
+#define CMD_LRESET	(1<<7)		/* partial reset (no ports, etc) */
+#define CMD_IAAD	(1<<6)		/* "doorbell" interrupt async advance */
+#define CMD_ASE		(1<<5)		/* async schedule enable */
+#define CMD_PSE		(1<<4)		/* periodic schedule enable */
 /* 3:2 is periodic frame list size */
-#define CMD_RESET       (1<<1)          /* reset HC not bus */
-#define CMD_RUN         (1<<0)          /* start/stop HC */
-
-        /* USBSTS: offset 0x04 */
-        u32             status;
-#define STS_ASS         (1<<15)         /* Async Schedule Status */
-#define STS_PSS         (1<<14)         /* Periodic Schedule Status */
-#define STS_RECL        (1<<13)         /* Reclamation */
-#define STS_HALT        (1<<12)         /* Not running (any reason) */
+#define CMD_RESET	(1<<1)		/* reset HC not bus */
+#define CMD_RUN		(1<<0)		/* start/stop HC */
+
+	/* USBSTS: offset 0x04 */
+	u32		status;
+#define STS_PPCE_MASK	(0xff<<16)	/* Per-Port change event 1-16 */
+#define STS_ASS		(1<<15)		/* Async Schedule Status */
+#define STS_PSS		(1<<14)		/* Periodic Schedule Status */
+#define STS_RECL	(1<<13)		/* Reclamation */
+#define STS_HALT	(1<<12)		/* Not running (any reason) */
 /* some bits reserved */
-        /* these STS_* flags are also intr_enable bits (USBINTR) */
-#define STS_IAA         (1<<5)          /* Interrupted on async advance */
-#define STS_FATAL       (1<<4)          /* such as some PCI access errors */
-#define STS_FLR         (1<<3)          /* frame list rolled over */
-#define STS_PCD         (1<<2)          /* port change detect */
-#define STS_ERR         (1<<1)          /* "error" completion (overflow, ...) */
-#define STS_INT         (1<<0)          /* "normal" completion (short, ...) */
-
-        /* USBINTR: offset 0x08 */
-        u32             intr_enable;
-
-        /* FRINDEX: offset 0x0C */
-        u32             frame_index;    /* current microframe number */
-        /* CTRLDSSEGMENT: offset 0x10 */
-        u32             segment;        /* address bits 63:32 if needed */
-        /* PERIODICLISTBASE: offset 0x14 */
-        u32             frame_list;     /* points to periodic list */
-        /* ASYNCLISTADDR: offset 0x18 */
-        u32             async_next;     /* address of next async queue head */
-
-        u32             reserved [9];
-
-        /* CONFIGFLAG: offset 0x40 */
-        u32             configured_flag;
-#define FLAG_CF         (1<<0)          /* true: we'll support "high speed" */
-
-        /* PORTSC: offset 0x44 */
-        u32             port_status [0];        /* up to N_PORTS */
+	/* these STS_* flags are also intr_enable bits (USBINTR) */
+#define STS_IAA		(1<<5)		/* Interrupted on async advance */
+#define STS_FATAL	(1<<4)		/* such as some PCI access errors */
+#define STS_FLR		(1<<3)		/* frame list rolled over */
+#define STS_PCD		(1<<2)		/* port change detect */
+#define STS_ERR		(1<<1)		/* "error" completion (overflow, ...) */
+#define STS_INT		(1<<0)		/* "normal" completion (short, ...) */
+
+	/* USBINTR: offset 0x08 */
+	u32		intr_enable;
+
+	/* FRINDEX: offset 0x0C */
+	u32		frame_index;	/* current microframe number */
+	/* CTRLDSSEGMENT: offset 0x10 */
+	u32		segment;	/* address bits 63:32 if needed */
+	/* PERIODICLISTBASE: offset 0x14 */
+	u32		frame_list;	/* points to periodic list */
+	/* ASYNCLISTADDR: offset 0x18 */
+	u32		async_next;	/* address of next async queue head */
+
+	u32		reserved[9];
+
+	/* CONFIGFLAG: offset 0x40 */
+	u32		configured_flag;
+#define FLAG_CF		(1<<0)		/* true: we'll support "high speed" */
+
+	/* PORTSC: offset 0x44 */
+	u32		port_status[0];	/* up to N_PORTS */
+/* EHCI 1.1 addendum */
+#define PORTSC_SUSPEND_STS_ACK 0
+#define PORTSC_SUSPEND_STS_NYET 1
+#define PORTSC_SUSPEND_STS_STALL 2
+#define PORTSC_SUSPEND_STS_ERR 3
+
+#define PORT_DEV_ADDR	(0x7f<<25)		/* device address */
+#define PORT_SSTS	(0x3<<23)		/* suspend status */
 /* 31:23 reserved */
-#define PORT_WKOC_E     (1<<22)         /* wake on overcurrent (enable) */
-#define PORT_WKDISC_E   (1<<21)         /* wake on disconnect (enable) */
-#define PORT_WKCONN_E   (1<<20)         /* wake on connect (enable) */
+#define PORT_WKOC_E	(1<<22)		/* wake on overcurrent (enable) */
+#define PORT_WKDISC_E	(1<<21)		/* wake on disconnect (enable) */
+#define PORT_WKCONN_E	(1<<20)		/* wake on connect (enable) */
 /* 19:16 for port testing */
-#define PORT_LED_OFF    (0<<14)
-#define PORT_LED_AMBER  (1<<14)
-#define PORT_LED_GREEN  (2<<14)
-#define PORT_LED_MASK   (3<<14)
-#define PORT_OWNER      (1<<13)         /* true: companion hc owns this port */
-#define PORT_POWER      (1<<12)         /* true: has power (see PPC) */
-#define PORT_USB11(x) (((x)&(3<<10))==(1<<10))  /* USB 1.1 device */
+#define PORT_TEST_PKT	(0x4<<16)	/* Port Test Control - packet test */
+#define PORT_LED_OFF	(0<<14)
+#define PORT_LED_AMBER	(1<<14)
+#define PORT_LED_GREEN	(2<<14)
+#define PORT_LED_MASK	(3<<14)
+#define PORT_OWNER	(1<<13)		/* true: companion hc owns this port */
+#define PORT_POWER	(1<<12)		/* true: has power (see PPC) */
+#define PORT_USB11(x) (((x)&(3<<10)) == (1<<10))	/* USB 1.1 device */
 /* 11:10 for detecting lowspeed devices (reset vs release ownership) */
 /* 9 reserved */
-#define PORT_RESET      (1<<8)          /* reset port */
-#define PORT_SUSPEND    (1<<7)          /* suspend port */
-#define PORT_RESUME     (1<<6)          /* resume it */
-#define PORT_OCC        (1<<5)          /* over current change */
-#define PORT_OC         (1<<4)          /* over current active */
-#define PORT_PEC        (1<<3)          /* port enable change */
-#define PORT_PE         (1<<2)          /* port enable */
-#define PORT_CSC        (1<<1)          /* connect status change */
-#define PORT_CONNECT    (1<<0)          /* device connected */
+#define PORT_LPM	(1<<9)		/* LPM transaction */
+#define PORT_RESET	(1<<8)		/* reset port */
+#define PORT_SUSPEND	(1<<7)		/* suspend port */
+#define PORT_RESUME	(1<<6)		/* resume it */
+#define PORT_OCC	(1<<5)		/* over current change */
+#define PORT_OC		(1<<4)		/* over current active */
+#define PORT_PEC	(1<<3)		/* port enable change */
+#define PORT_PE		(1<<2)		/* port enable */
+#define PORT_CSC	(1<<1)		/* connect status change */
+#define PORT_CONNECT	(1<<0)		/* device connected */
 #define PORT_RWC_BITS   (PORT_CSC | PORT_PEC | PORT_OCC)
 } __attribute__ ((packed));
 
+#define USBMODE		0x68		/* USB Device mode */
+#define USBMODE_SDIS	(1<<3)		/* Stream disable */
+#define USBMODE_BE	(1<<2)		/* BE/LE endianness select */
+#define USBMODE_CM_HC	(3<<0)		/* host controller mode */
+#define USBMODE_CM_IDLE	(0<<0)		/* idle state */
+
+/* Moorestown has some non-standard registers, partially due to the fact that
+ * its EHCI controller has both TT and LPM support. HOSTPCx are extentions to
+ * PORTSCx
+ */
+#define HOSTPC0		0x84		/* HOSTPC extension */
+#define HOSTPC_PHCD	(1<<22)		/* Phy clock disable */
+#define HOSTPC_PSPD	(3<<25)		/* Port speed detection */
+#define USBMODE_EX	0xc8		/* USB Device mode extension */
+#define USBMODE_EX_VBPS	(1<<5)		/* VBus Power Select On */
+#define USBMODE_EX_HC	(3<<0)		/* host controller mode */
+#define TXFILLTUNING	0x24		/* TX FIFO Tuning register */
+#define TXFIFO_DEFAULT	(8<<16)		/* FIFO burst threshold 8 */
+
 /* Appendix C, Debug port ... intended for use with special "debug devices"
  * that can help if there's no serial console.  (nonstandard enumeration.)
  */
 struct ehci_dbg_port {
-        u32     control;
-#define DBGP_OWNER      (1<<30)
-#define DBGP_ENABLED    (1<<28)
-#define DBGP_DONE       (1<<16)
-#define DBGP_INUSE      (1<<10)
-#define DBGP_ERRCODE(x) (((x)>>7)&0x07)
-#       define DBGP_ERR_BAD     1
-#       define DBGP_ERR_SIGNAL  2
-#define DBGP_ERROR      (1<<6)
-#define DBGP_GO         (1<<5)
-#define DBGP_OUT        (1<<4)
-#define DBGP_LEN(x)     (((x)>>0)&0x0f)
-        u32     pids;
-#define DBGP_PID_GET(x)         (((x)>>16)&0xff)
-#define DBGP_PID_SET(data,tok)  (((data)<<8)|(tok))
-        u32     data03;
-        u32     data47;
-        u32     address;
-#define DBGP_EPADDR(dev,ep)     (((dev)<<8)|(ep))
+	u32	control;
+#define DBGP_OWNER	(1<<30)
+#define DBGP_ENABLED	(1<<28)
+#define DBGP_DONE	(1<<16)
+#define DBGP_INUSE	(1<<10)
+#define DBGP_ERRCODE(x)	(((x)>>7)&0x07)
+#	define DBGP_ERR_BAD	1
+#	define DBGP_ERR_SIGNAL	2
+#define DBGP_ERROR	(1<<6)
+#define DBGP_GO		(1<<5)
+#define DBGP_OUT	(1<<4)
+#define DBGP_LEN(x)	(((x)>>0)&0x0f)
+	u32	pids;
+#define DBGP_PID_GET(x)		(((x)>>16)&0xff)
+#define DBGP_PID_SET(data, tok)	(((data)<<8)|(tok))
+	u32	data03;
+	u32	data47;
+	u32	address;
+#define DBGP_EPADDR(dev, ep)	(((dev)<<8)|(ep))
 } __attribute__ ((packed));
 
 #endif
diff --git a/src/include/usb_ch9.h b/src/include/usb_ch9.h
index fa682776ba..b0aa7730f7 100644
--- a/src/include/usb_ch9.h
+++ b/src/include/usb_ch9.h
@@ -1,3 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
+ */
+
 #ifndef USB_CH9_H
 #define USB_CH9_H
 
diff --git a/src/include/usbdebug.h b/src/include/usbdebug.h
index aa3515f684..54d817afe5 100644
--- a/src/include/usbdebug.h
+++ b/src/include/usbdebug.h
@@ -1,6 +1,9 @@
 /*
  * This file is part of the coreboot project.
  *
+ * Copyright (C) 2007 AMD
+ * Written by Yinghai Lu <yinghai.lu@amd.com> for AMD.
+ *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; version 2 of the License.
diff --git a/src/lib/usbdebug.c b/src/lib/usbdebug.c
index 8dec4e37b6..c108fa3d3f 100644
--- a/src/lib/usbdebug.c
+++ b/src/lib/usbdebug.c
@@ -16,9 +16,7 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA, 02110-1301 USA
  */
-/*
- *	2006.12.10 yhlu moved it to corbeoot and use struct instead
- */
+
 #if !defined(__ROMCC__)
 #include <console/console.h>
 #else