summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRonald G. Minnich <rminich@gmail.com>2009-10-02 15:46:10 +0000
committerMyles Watson <mylesgw@gmail.com>2009-10-02 15:46:10 +0000
commit1c53d771c12cb01ec9e2a0e73bf183a28aca9414 (patch)
tree1c3198df943984406fdcdba6f161b6171ce05e05
parent6cc9c0ad28e0de786015691a10bc3f6588a27366 (diff)
downloadcoreboot-1c53d771c12cb01ec9e2a0e73bf183a28aca9414.tar.xz
Remove the Embedded Planet board.
Signed-off-by: Ronald G. Minnich <rminich@gmail.com> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Myles Watson <mylesgw@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4710 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/Kconfig9
-rw-r--r--src/mainboard/embeddedplanet/Kconfig1
-rw-r--r--src/mainboard/embeddedplanet/ep405pc/Config.lb27
-rw-r--r--src/mainboard/embeddedplanet/ep405pc/Options.lb153
-rw-r--r--src/mainboard/embeddedplanet/ep405pc/devicetree.cb17
-rwxr-xr-xsrc/mainboard/embeddedplanet/ep405pc/ep405pc.cfg89
-rw-r--r--src/mainboard/embeddedplanet/ep405pc/init.c114
-rw-r--r--targets/embeddedplanet/ep405pc/Config.lb81
8 files changed, 0 insertions, 491 deletions
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index 751eddac78..9f7f8e42d5 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -38,8 +38,6 @@ config VENDOR_DIGITAL_LOGIC
bool "DIGITAL-LOGIC"
config VENDOR_EAGLELION
bool "EagleLion"
-config VENDOR_EMBEDDED_PLANET
- bool "Embedded Planet"
config VENDOR_EMULATION
bool "Emulation"
config VENDOR_GIGABYTE
@@ -184,11 +182,6 @@ config MAINBOARD_VENDOR
config MAINBOARD_VENDOR
string
- default "Embedded Planet"
- depends on VENDOR_EMBEDDED_PLANET
-
-config MAINBOARD_VENDOR
- string
default "Emulation"
depends on VENDOR_EMULATION
@@ -349,7 +342,6 @@ source "src/mainboard/compaq/Kconfig"
source "src/mainboard/dell/Kconfig"
source "src/mainboard/digitallogic/Kconfig"
source "src/mainboard/eaglelion/Kconfig"
-source "src/mainboard/embeddedplanet/Kconfig"
source "src/mainboard/emulation/Kconfig"
source "src/mainboard/gigabyte/Kconfig"
source "src/mainboard/hp/Kconfig"
@@ -361,7 +353,6 @@ source "src/mainboard/jetway/Kconfig"
source "src/mainboard/kontron/Kconfig"
source "src/mainboard/lippert/Kconfig"
source "src/mainboard/mitac/Kconfig"
-source "src/mainboard/motorola/Kconfig"
source "src/mainboard/msi/Kconfig"
source "src/mainboard/nec/Kconfig"
source "src/mainboard/newisys/Kconfig"
diff --git a/src/mainboard/embeddedplanet/Kconfig b/src/mainboard/embeddedplanet/Kconfig
deleted file mode 100644
index 792d600548..0000000000
--- a/src/mainboard/embeddedplanet/Kconfig
+++ /dev/null
@@ -1 +0,0 @@
-#
diff --git a/src/mainboard/embeddedplanet/ep405pc/Config.lb b/src/mainboard/embeddedplanet/ep405pc/Config.lb
deleted file mode 100644
index 4f7f808cec..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/Config.lb
+++ /dev/null
@@ -1,27 +0,0 @@
-##
-## Config file for the Embedded Planet EP405PC Computing Engine
-##
-
-##
-## Early board initialization, called from ppc_main()
-##
-initobject init.c
-
-arch ppc end
-chip cpu/ppc/ppc4xx
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/winbond/w83c553
- device pci 9.0 on end # ISA bridge
- device pci 9.1 on end # IDE contoller
- end
- device pci e.0 on end
- end
-end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a"
-makedefine CFLAGS += -msoft-float
diff --git a/src/mainboard/embeddedplanet/ep405pc/Options.lb b/src/mainboard/embeddedplanet/ep405pc/Options.lb
deleted file mode 100644
index e91b12136b..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/Options.lb
+++ /dev/null
@@ -1,153 +0,0 @@
-##
-## Config file for the Embedded Planet EP405PC Computing Engine
-##
-
-uses CONFIG_PCIC0_CFGADDR
-uses CONFIG_CBFS
-uses CONFIG_ARCH_X86
-uses CONFIG_PCIC0_CFGDATA
-uses CONFIG_ISA_IO_BASE
-uses CONFIG_ISA_MEM_BASE
-uses CONFIG_TTYS0_BASE
-uses CONFIG_IO_BASE
-
-uses CONFIG_CPU_OPT
-uses CONFIG_CROSS_COMPILE
-uses CONFIG_HAVE_OPTION_TABLE
-uses CONFIG_COMPRESS
-uses CONFIG_CHIP_CONFIGURE
-uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_USE_INIT
-uses CONFIG_CONSOLE_SERIAL8250
-uses CONFIG_TTYS0_BAUD CONFIG_TTYS0_DIV
-uses CONFIG_NO_POST
-uses CONFIG_IDE
-uses CONFIG_FS_PAYLOAD
-uses CONFIG_FS_EXT2
-uses CONFIG_FS_ISO9660
-uses CONFIG_FS_FAT
-uses CONFIG_COMPRESSED_PAYLOAD_LZMA
-uses CONFIG_PRECOMPRESSED_PAYLOAD
-uses CONFIG_AUTOBOOT_CMDLINE
-uses CONFIG_SYS_CLK_FREQ
-uses CONFIG_IDE_BOOT_DRIVE
-#uses CONFIG_IDE_SWAB
-uses CONFIG_IDE_OFFSET
-uses CONFIG_ROM_SIZE
-uses CONFIG_ROM_IMAGE_SIZE
-uses CONFIG_RESET
-uses CONFIG_EXCEPTION_VECTORS
-uses CONFIG_ROMBASE
-uses CONFIG_ROMSTART
-uses CONFIG_RAMBASE
-#uses CONFIG_RAMSTART
-uses CONFIG_EMBEDDED_RAM_SIZE
-uses CONFIG_STACK_SIZE CONFIG_HEAP_SIZE
-
-uses CONFIG_MAINBOARD
-uses CONFIG_MAINBOARD_VENDOR
-uses CONFIG_MAINBOARD_PART_NUMBER
-uses COREBOOT_EXTRA_VERSION
-uses CONFIG_CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses CONFIG_OBJCOPY
-
-##
-## Set PCI configuration register addresses
-##
-default CONFIG_PCIC0_CFGADDR=0xeec00000
-default CONFIG_PCIC0_CFGDATA=0xeec00004
-
-##
-## Set PCI/ISA I/O and memory base address
-##
-default CONFIG_ISA_IO_BASE=0xe8000000
-default CONFIG_ISA_MEM_BASE=0x80000000
-default CONFIG_IO_BASE=CONFIG_ISA_IO_BASE
-
-##
-## HACK ALERT: the UART0 registers are not in the PCI I/O address space
-## but both IDE and UART use the same routines for I/O (inb/outb). To get
-## around this we set TTYSO_BASE to the difference between the two.
-##
-default CONFIG_TTYS0_BASE=0xef600300-CONFIG_ISA_IO_BASE
-
-## Enable PPC405 instructions
-default CONFIG_CPU_OPT="-mcpu=405"
-#default CONFIG_CPU_OPT=""
-default CONFIG_ARCH_X86=0
-
-## Use stage 1 initialization code
-default CONFIG_USE_INIT=1
-
-## Use chip configuration
-default CONFIG_CHIP_CONFIGURE=1
-
-## We don't use compressed image
-default CONFIG_COMPRESS=0
-
-## Turn off POST codes
-default CONFIG_NO_POST=1
-
-## Enable serial console
-default CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
-default CONFIG_CONSOLE_SERIAL8250=1
-# Divisor of 69 == 9600 baud due to weird clocking
-default CONFIG_TTYS0_DIV=69
-default CONFIG_TTYS0_BAUD=9600
-
-## Boot linux from IDE
-default CONFIG_IDE=1
-default CONFIG_FS_PAYLOAD=1
-default CONFIG_FS_EXT2=1
-default CONFIG_FS_ISO9660=1
-default CONFIG_FS_FAT=1
-default CONFIG_AUTOBOOT_CMDLINE="hda1:/vmlinuz"
-
-default CONFIG_ROM_SIZE=1048576
-default CONFIG_ROM_IMAGE_SIZE=160*1024
-
-## Board has fixed size RAM
-default CONFIG_EMBEDDED_RAM_SIZE=64*1024*1024
-
-## Coreboot C code runs at this location in RAM
-default CONFIG_RAMBASE=0x00100000
-
-##
-## Use a 64K stack
-##
-default CONFIG_STACK_SIZE=0x10000
-
-##
-## Use a 64K heap
-##
-default CONFIG_HEAP_SIZE=0x10000
-
-##
-## System clock
-##
-default CONFIG_SYS_CLK_FREQ=33
-
-##
-default CONFIG_ROMBASE=0xfff00000
-
-## Reset vector address
-default CONFIG_RESET=0xfffffffc
-
-## Exception vectors
-default CONFIG_EXCEPTION_VECTORS=CONFIG_ROMBASE+0x100
-
-## coreboot ROM start address
-default CONFIG_ROMSTART=0xfff03000
-
-## coreboot C code runs at this location in RAM
-default CONFIG_RAMBASE=0x00100000
-
-### End Options.lb
-#
-# CBFS
-#
-#
-default CONFIG_CBFS=1
-end
diff --git a/src/mainboard/embeddedplanet/ep405pc/devicetree.cb b/src/mainboard/embeddedplanet/ep405pc/devicetree.cb
deleted file mode 100644
index b6f5329f53..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/devicetree.cb
+++ /dev/null
@@ -1,17 +0,0 @@
-chip cpu/ppc/ppc4xx
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/winbond/w83c553
- device pci 9.0 on end # ISA bridge
- device pci 9.1 on end # IDE contoller
- end
- device pci e.0 on end
- end
-end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-addaction coreboot.a "$(CONFIG_CROSS_COMPILE)ranlib coreboot.a"
-makedefine CFLAGS += -msoft-float
diff --git a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg b/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg
deleted file mode 100755
index 305245d751..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/ep405pc.cfg
+++ /dev/null
@@ -1,89 +0,0 @@
-; bdiGDB configuration file for the Embedded Planet EP405PC
-; ---------------------------------------------------------
-;
-[INIT]
-; init core register
-WSPR 954 0x00000000 ;DCWR: Disable data cache write-thru
-WSPR 1018 0x00000000 ;DCCR: Disable data cache
-WSPR 1019 0x00000000 ;ICCR: Disable instruction cache
-WSPR 981 0x00000000 ;EVPR: Exception Vector Table @0x00000000
-
-; Setup SDRAM Controller
-WDCR 16 0x00000080 ;Select SDRAM0_TR
-WDCR 17 0x010E8016 ;TR: SDRAM Timing Register
-WDCR 16 0x00000040 ;Select SDRAM0_B0CR
-WDCR 17 0x00084001 ;Select bank 0
-WDCR 16 0x00000030 ;Select SDRAM0_RTR
-WDCR 17 0x08080000 ;RTR: Refresh Timing Register
-WDCR 16 0x00000094 ;Select SDRAM0_ECCCFG
-WDCR 17 0x00000000 ;ECC: Disabled
-WDCR 16 0x00000034 ;Select SDRAM0_PMIT
-WDCR 17 0x0F000000 ;PMIT: Power Management Idle Timer
-DELAY 1 ;Wait for SDRAM powerup
-WDCR 16 0x00000020 ;Select SDRAM0_CFG
-WDCR 17 0x80C00000 ;CFG: Enable
-
-; MMU
-WM32 0xf0 0x00000000 ;invalidate page table base
-
-; EBC
-WDCR 0x12 0x00000004 ;Select EBC0_B4CR
-WDCR 0x13 0xF4058000 ;Set NVRTC/BCSR
-WDCR 0x12 0x00000014 ;Select EBC0_B4AP
-WDCR 0x13 0x04050000 ;Set NVRTC/BCSR timing
-WM8 0xF4000003 0x20 ;Enable UART0
-WM8 0xF4000009 0x07 ;LED
-DELAY 500
-WM8 0xF4000009 0x0b ;LED
-DELAY 500
-WM8 0xF4000009 0x0d ;LED
-DELAY 500
-WM8 0xF4000009 0x0e ;LED
-DELAY 500
-
-[TARGET]
-JTAGCLOCK 0 ;use 16 MHz JTAG clock
-CPUTYPE 405 ;the used target CPU type
-BDIMODE AGENT ;the BDI working mode (LOADONLY | AGENT)
-;WAKEUP 3000 ;wakeup time after reset
-BREAKMODE HARD ;SOFT or HARD, HARD uses PPC hardware breakpoint
-STEPMODE JTAG ;JTAG or HWBP, HWPB uses one or two hardware breakpoints
-VECTOR CATCH ;catch unhandled exceptions
-MMU XLAT 0xC0000000 ;enable virtual address mode
-PTBASE 0x000000f0 ;address where kernel/user stores pointer to page table
-SIO 2002 9600 ;TCP port for serial IO
-;SIO 2002 115200 ;TCP port for serial IO
-
-;REGLIST SPR ;select register to transfer to GDB
-;REGLIST ALL ;select register to transfer to GDB
-;SCANPRED 2 2 ;JTAG devices connected before PPC400
-;SCANSUCC 3 3 ;JTAG devices connected after PPC400
-
-[HOST]
-IP 10.0.1.2
-FORMAT ELF
-FILE coreboot.elf
-;START 0x200000
-LOAD MANUAL ;load code MANUAL or AUTO after reset
-DEBUGPORT 2001
-DUMP dump.bin ;Linux: dump.bin must already exist and public writable
-
-[FLASH]
-WORKSPACE 0x00004000 ;workspace in target RAM for fast programming algorithm
-CHIPTYPE AM29BX16 ;Flash type (AM29F | AM29BX8 | AM29BX16 | I28BX8 | I28BX16)
-CHIPSIZE 0x400000 ;The size of one flash chip in bytes (e.g. AM29F040 = 0x80000)
-BUSWIDTH 16 ;The width of the flash memory bus in bits (8 | 16 | 32)
-ERASE 0xFFF80000 ;erase sector 0 of flash in U7 (AM29F040)
-ERASE 0xFFF90000 ;erase sector 1 of flash
-ERASE 0xFFFA0000 ;erase sector 2 of flash
-ERASE 0xFFFB0000 ;erase sector 3 of flash
-ERASE 0xFFFC0000 ;erase sector 4 of flash
-ERASE 0xFFFD0000 ;erase sector 5 of flash
-ERASE 0xFFFE0000 ;erase sector 6 of flash
-ERASE 0xFFFF0000 ;erase sector 7 of flash
-
-[REGS]
-IDCR1 0x010 0x011 ;MEMCFGADR and MEMCFGDATA
-IDCR2 0x012 0x013 ;EBCCFGADR and EBCCFGDATA
-IDCR3 0x014 0x015 ;KIAR and KIDR
-FILE reg405gp.def
diff --git a/src/mainboard/embeddedplanet/ep405pc/init.c b/src/mainboard/embeddedplanet/ep405pc/init.c
deleted file mode 100644
index 6148d89c4a..0000000000
--- a/src/mainboard/embeddedplanet/ep405pc/init.c
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- * Copyright (C) 2003, Greg Watson <gwatson@lanl.gov>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- */
-
-/*
- * Do very early board initialization:
- *
- * - Configure External Bus (EBC)
- * - Setup Flash
- * - Setup NVRTC
- * - Setup Board Control and Status Registers (BCSR)
- * - Enable UART0 for debugging
- */
-
-#include <ppc_asm.tmpl>
-#include <ppc.h>
-#include <ppc4xx.h>
-#include <arch/io.h>
-#include <timer.h>
-
-void
-board_init(void)
-{
- /*
- * Configure Inerrupt Controller
- */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
- mtdcr(uictr, 0x10000000); /* set int trigger levels */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest pri */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * Configure FLASH
- */
- mtebc(pb0cr, 0xFC0DC000);
- mtebc(pb0ap, 0x02000000);
-
- /*
- * Configure NVTRC/BCSR
- */
- mtebc(pb4cr, 0xF4058000);
- mtebc(pb4ap, 0x04050000);
-
- /*
- * Board Control and Status Register (BCSR) setup
- */
-
- /*
- * BCSR1 - PCI Control
- */
- out_8((unsigned char *)0xF4000001, 0x80);
-
- /*
- * BCSR2 - FLASH, NVRAM and POR Control
- */
- out_8((unsigned char *)0xF4000002, 0x9C);
-
- /*
- * BCSR3 - FENET and UART
- */
- out_8((unsigned char *)0xF4000003, 0xf0);
-
- /*
- * BCSR4 - PCI Status and Masking
- */
- out_8((unsigned char *)0xF4000004, 0x00);
-
- /*
- * BCSR5 - XIRQ Select
- */
- out_8((unsigned char *)0xF4000005, 0x00);
-
- /*
- * BCSR6 - XIRQ Routing
- */
- out_8((unsigned char *)0xF4000006, 0x07);
-
- /*
- * Cycle LEDs to show something is happening...
- */
- out_8((unsigned char *)0xF4000009, 0x07);
- udelay(100000);
- out_8((unsigned char *)0xF4000009, 0x0B);
- udelay(100000);
- out_8((unsigned char *)0xF4000009, 0x0D);
- udelay(100000);
- out_8((unsigned char *)0xF4000009, 0x0E);
-}
-
-void
-board_init2(void)
-{
-}
diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb
deleted file mode 100644
index 820a38506a..0000000000
--- a/targets/embeddedplanet/ep405pc/Config.lb
+++ /dev/null
@@ -1,81 +0,0 @@
-# Config file for Embedded Planet EP405PC board
-# This will make a target directory of ./ep405pc
-
-target ep405pc
-mainboard embeddedplanet/ep405pc
-
-romimage "fallback"
- ## Enable PPC405 instructions
- option CONFIG_CPU_OPT="-mcpu=405"
-
- ## use a cross compiler
- #option CONFIG_CROSS_COMPILE="powerpc-ibm-eabi-"
-
- ## Use stage 1 initialization code
- option CONFIG_USE_INIT=1
-
- ## Use chip configuration
- option CONFIG_CHIP_CONFIGURE=1
-
- ## We don't use compressed image
- option CONFIG_COMPRESS=0
-
- ## Turn off POST codes
- option CONFIG_NO_POST=1
-
- ## Enable serial console
- option CONFIG_DEFAULT_CONSOLE_LOGLEVEL=8
- option CONFIG_CONSOLE_SERIAL8250=1
- # Divisor of 69 == 9600 baud due to weird clocking
- option CONFIG_TTYS0_DIV=69
- option CONFIG_TTYS0_BAUD=9600
-
- ## Boot linux from IDE
- option CONFIG_IDE=1
- option CONFIG_FS_PAYLOAD=1
- option CONFIG_FS_EXT2=1
- option CONFIG_FS_ISO9660=1
- option CONFIG_FS_FAT=1
- option CONFIG_AUTOBOOT_CMDLINE="hda1:/vmlinuz"
-
- option CONFIG_ROM_SIZE=1024*1024
-
- ## Board has fixed size RAM
- option CONFIG_EMBEDDED_RAM_SIZE=64*1024*1024
-
- ## Coreboot C code runs at this location in RAM
- option CONFIG_RAMBASE=0x00100000
-
- ##
- ## Use a 64K stack
- ##
- option CONFIG_STACK_SIZE=0x10000
-
- ##
- ## Use a 64K heap
- ##
- option CONFIG_HEAP_SIZE=0x10000
-
- ##
- ## System clock
- ##
- option CONFIG_SYS_CLK_FREQ=33
-
- ##
- option CONFIG_ROMBASE=0xfff00000
-
- ## Reset vector address
- option CONFIG_RESET=0xfffffffc
-
- ## Exception vectors
- option CONFIG_EXCEPTION_VECTORS=CONFIG_ROMBASE+0x100
-
- ## coreboot ROM start address
- option CONFIG_ROMSTART=0xfff03000
-
- ## coreboot C code runs at this location in RAM
- option CONFIG_RAMBASE=0x00100000
-
-end
-
-buildrom ./coreboot.rom CONFIG_ROM_SIZE "fallback"