diff options
| author | Caveh Jalali <caveh@chromium.org> | 2020-08-06 00:55:40 -0700 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2020-08-17 06:39:23 +0000 |
| commit | eb9337c9cc2fd5432d79509174efdcf6bbcf9a01 (patch) | |
| tree | 68f0dba88f6bfd9076f52a7c4e03b90099c541f2 | |
| parent | ac66bda47c2006e0dea02ad988572e35e98b80ff (diff) | |
| download | coreboot-eb9337c9cc2fd5432d79509174efdcf6bbcf9a01.tar.xz | |
mb/google/volteer: Define stop_gpio for goodix touch screen
This applies to the goodix touch screen on both the volteer and
volteer2 variants: Define GPP_E3 as the stop_gpio for the touch screen
"Report_Switch" signal. Goodix defines a 1ms (minimum) delay after
stop off. In addition, no longer drive this GPIO high by default as it
is now controlled by the kernel through ACPI.
BUG=b:153705232
TEST=touch screen still functional on volteer; confirmed timings with
scope (VDD, RESET, REPORT_SWITCH)
Change-Id: I3ead9cf79812d08c4917be4585ed273050465a9b
Signed-off-by: Caveh Jalali <caveh@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44356
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
4 files changed, 14 insertions, 2 deletions
diff --git a/src/mainboard/google/volteer/variants/volteer/gpio.c b/src/mainboard/google/volteer/variants/volteer/gpio.c index 8bbc447797..df17e5046f 100644 --- a/src/mainboard/google/volteer/variants/volteer/gpio.c +++ b/src/mainboard/google/volteer/variants/volteer/gpio.c @@ -102,7 +102,7 @@ static const struct pad_config override_gpio_table[] = { /* E2 : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */ PAD_CFG_GPI(GPP_E2, NONE, DEEP), /* E3 : CPU_GP0 ==> USI_REPORT_EN */ - PAD_CFG_GPO(GPP_E3, 1, DEEP), + PAD_CFG_GPO(GPP_E3, 0, DEEP), /* E7 : CPU_GP1 ==> USI_INT */ PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE), /* E8 : SPI1_CS1# ==> SLP_S0IX */ diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb index d4bd7f41fe..a435c95f14 100644 --- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb @@ -89,10 +89,16 @@ chip soc/intel/tigerlake register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + # Parameter T3 >= 10ms register "generic.reset_delay_ms" = "120" + # Parameter T2 >= 1ms register "generic.reset_off_delay_ms" = "3" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + # Parameter T1 >= 10ms register "generic.enable_delay_ms" = "12" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" + # Parameter T4 >= 1ms + register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 14 on end diff --git a/src/mainboard/google/volteer/variants/volteer2/gpio.c b/src/mainboard/google/volteer/variants/volteer2/gpio.c index 96d940ab3f..09a4dd5a8b 100644 --- a/src/mainboard/google/volteer/variants/volteer2/gpio.c +++ b/src/mainboard/google/volteer/variants/volteer2/gpio.c @@ -102,7 +102,7 @@ static const struct pad_config override_gpio_table[] = { /* E2 : SPI1_IO3 ==> WLAN_PCIE_WAKE_ODL */ PAD_CFG_GPI(GPP_E2, NONE, DEEP), /* E3 : CPU_GP0 ==> USI_REPORT_EN */ - PAD_CFG_GPO(GPP_E3, 1, DEEP), + PAD_CFG_GPO(GPP_E3, 0, DEEP), /* E7 : CPU_GP1 ==> USI_INT */ PAD_CFG_GPI_APIC(GPP_E7, NONE, PLTRST, LEVEL, NONE), /* E8 : SPI1_CS1# ==> SLP_S0IX */ diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb index 62749fc96d..fefe9ba6a7 100644 --- a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -45,10 +45,16 @@ chip soc/intel/tigerlake register "generic.probed" = "1" register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)" + # Parameter T3 >= 10ms register "generic.reset_delay_ms" = "120" + # Parameter T2 >= 1ms register "generic.reset_off_delay_ms" = "3" register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A8)" + # Parameter T1 >= 10ms register "generic.enable_delay_ms" = "12" + register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_E3)" + # Parameter T4 >= 1ms + register "generic.stop_off_delay_ms" = "1" register "generic.has_power_resource" = "1" register "hid_desc_reg_offset" = "0x01" device i2c 14 on end |