mb/via/epia-m700: Remove board

Platforms with LATE_CBMEM_INIT were agreed to be
removed with 4.7 release late 2017.

Change-Id: I34f9bffcced5ccdd8691994b78fffed057021d0e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/26676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>

13 files changed, 0 insertions, 1808 deletions

diff --git a/src/mainboard/via/epia-m700/Kconfig b/src/mainboard/via/epia-m700/Kconfig
deleted file mode 100644
index c64f8d282f..0000000000
--- a/src/mainboard/via/epia-m700/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-if BOARD_VIA_EPIA_M700
-
-config BOARD_SPECIFIC_OPTIONS # dummy
-	def_bool y
-	select CPU_VIA_C7
-	select NORTHBRIDGE_VIA_VX800
-	select SUPERIO_WINBOND_W83697HF
-	select HAVE_PIRQ_TABLE
-	# Note: For ACPI, you need to use the 'get_dsdt' script and uncomment
-	# the "select HAVE_ACPI_TABLES" line below.
-	# select HAVE_ACPI_TABLES
-	select HAVE_OPTION_TABLE
-	select BOARD_ROMSIZE_KB_512
-
-config MAINBOARD_DIR
-	string
-	default via/epia-m700
-
-config MAINBOARD_PART_NUMBER
-	string
-	default "EPIA-M700"
-
-config IRQ_SLOT_COUNT
-	int
-	default 13
-
-endif # BOARD_VIA_EPIA_M700
diff --git a/src/mainboard/via/epia-m700/Kconfig.name b/src/mainboard/via/epia-m700/Kconfig.name
deleted file mode 100644
index 041f8cf1f0..0000000000
--- a/src/mainboard/via/epia-m700/Kconfig.name
+++ /dev/null
@@ -1,2 +0,0 @@
-config BOARD_VIA_EPIA_M700
-	bool "EPIA-M700"
diff --git a/src/mainboard/via/epia-m700/acpi_tables.c b/src/mainboard/via/epia-m700/acpi_tables.c
deleted file mode 100644
index 2b96ca86c5..0000000000
--- a/src/mainboard/via/epia-m700/acpi_tables.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * LinuxBIOS ACPI Table support
- * written by Stefan Reinauer <stepan@openbios.org>
- * ACPI FADT, FACS, and DSDT table support added by
- * Nick Barker <nick.barker9@btinternet.com>, and those portions
- * (C) Copyright 2004 Nick Barker
- * (C) Copyright 2005 Stefan Reinauer
- * (C) Copyright 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Most parts of this file copied from asus\a8v-e_se\acpi_tables.c,
- * acpi_is_wakeup() is from Rudolf's S3 patch and SSDT was added.
- */
-
-#include <console/console.h>
-#include <string.h>
-#include <arch/acpi.h>
-#include <device/device.h>
-#include <device/pci_ids.h>
-#include "northbridge/via/vx800/vx800.h"
-
-extern u32 wake_vec;
-
-/*
- * These four macros are copied from <arch/smp/mpspec.h>, I have to do this
- * since the "CONFIG_GENERATE_MP_TABLE = 0", and also since
- * mainboard/via/... have no mptable.c (so that I can not set
- * "CONFIG_GENERATE_MP_TABLE = 1" as many other mainboards.
- * So I have to copy these four to here. acpi_fill_madt() needs this.
- */
-#define MP_IRQ_POLARITY_HIGH	0x1
-#define MP_IRQ_POLARITY_LOW	0x3
-#define MP_IRQ_TRIGGER_EDGE	0x4
-#define MP_IRQ_TRIGGER_LEVEL	0xc
-
-unsigned long acpi_fill_mcfg(unsigned long current)
-{
-	/* NO MCFG in VX855, no PCI-E. */
-	return current;
-}
-
-unsigned long acpi_create_madt_lapic_nmis(unsigned long current, u16 flags,
-					  u8 lint)
-{
-	device_t cpu;
-	int cpu_index = 0;
-
-	for (cpu = all_devices; cpu; cpu = cpu->next) {
-		if ((cpu->path.type != DEVICE_PATH_APIC) ||
-		    (cpu->bus->dev->path.type != DEVICE_PATH_CPU_CLUSTER)) {
-			continue;
-		}
-		if (!cpu->enabled)
-			continue;
-		current += acpi_create_madt_lapic_nmi((acpi_madt_lapic_nmi_t *)
-					      current, cpu_index, flags, lint);
-		cpu_index++;
-	}
-	return current;
-}
-
-unsigned long acpi_fill_madt(unsigned long current)
-{
-	/* Create all subtables for processors. */
-	current = acpi_create_madt_lapics(current);
-
-	/* Write SB IOAPIC. */
-	current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
-				   VX800SB_APIC_ID, VX800SB_APIC_BASE, 0);
-
-	/* IRQ0 -> APIC IRQ2. */
-	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
-						current, 0, 0, 2, 0x0);
-
-	/* IRQ9 ACPI active low. */
-	current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
-		current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
-
-	/* Create all subtables for processors. */
-	current = acpi_create_madt_lapic_nmis(current,
-			      MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
-
-	return current;
-}
diff --git a/src/mainboard/via/epia-m700/board_info.txt b/src/mainboard/via/epia-m700/board_info.txt
deleted file mode 100644
index 6be033f2ad..0000000000
--- a/src/mainboard/via/epia-m700/board_info.txt
+++ /dev/null
@@ -1,7 +0,0 @@
-Category: mini
-Board URL: http://www.viaembedded.com/en/products/boards/670/1/EPIA-M700_%28EOL%29.html
-ROM package: SOIC8
-ROM protocol: SPI
-ROM socketed: n
-Flashrom support: y
-Release year: 2008
diff --git a/src/mainboard/via/epia-m700/cmos.layout b/src/mainboard/via/epia-m700/cmos.layout
deleted file mode 100644
index b238a379d8..0000000000
--- a/src/mainboard/via/epia-m700/cmos.layout
+++ /dev/null
@@ -1,28 +0,0 @@
-entries
-
-0          384       r       0        reserved_memory
-384          1       e       4        boot_option
-388          4       h       0        reboot_counter
-#392          3       r       0        unused
-400          1       e       1        power_on_after_fail
-412          4       e       6        debug_level
-456          1       e       1        ECC_memory
-1008         16      h       0        check_sum
-
-enumerations
-
-#ID value   text
-1     0     Disable
-1     1     Enable
-2     0     Enable
-2     1     Disable
-4     0     Fallback
-4     1     Normal
-6     5     Notice
-6     6     Info
-6     7     Debug
-6     8     Spew
-
-checksums
-
-checksum 392 1007 1008
diff --git a/src/mainboard/via/epia-m700/devicetree.cb b/src/mainboard/via/epia-m700/devicetree.cb
deleted file mode 100644
index 2f971c22b1..0000000000
--- a/src/mainboard/via/epia-m700/devicetree.cb
+++ /dev/null
@@ -1,24 +0,0 @@
-chip northbridge/via/vx800	# Northbridge
-  device domain 0 on
-    device pci 0.0 on end	# AGP Bridge
-    device pci 0.1 on end	# Error Reporting
-    device pci 0.2 on end	# Host Bus Control
-    device pci 0.3 on end	# Memory Controller
-    device pci 0.4 on end	# Power Management
-    device pci 0.7 on end	# V-Link Controller
-    device pci 1.0 on end	# PCI Bridge
-    # device pci f.0 on end	# IDE/SATA
-    # device pci f.1 on end	# IDE
-    # device pci 10.0 on end	# USB 1.1
-    # device pci 10.1 on end	# USB 1.1
-    # device pci 10.2 on end	# USB 1.1
-    # device pci 10.4 on end	# USB 2.0
-    # device pci 11.0 on	# Southbridge LPC
-    # end
-  end
-  device cpu_cluster 0 on	# APIC cluster
-    chip cpu/via/c7	# VIA C7
-      device lapic 0 on end	# APIC
-    end
-  end
-end
diff --git a/src/mainboard/via/epia-m700/driving_clk_phase_data.c b/src/mainboard/via/epia-m700/driving_clk_phase_data.c
deleted file mode 100644
index aac6c102e2..0000000000
--- a/src/mainboard/via/epia-m700/driving_clk_phase_data.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include "northbridge/via/vx800/driving_clk_phase_data.h"
-
-// DQS Driving
-// Reg0xE0, 0xE1
-// According to #Bank to set DRAM DQS Driving
-// #Bank    1     2     3     4     5     6     7     8
-static const u8 DDR2_DQSA_Driving_Table[4] = { 0xEE, 0xEE, 0xEE, 0xEE };
-static const u8 DDR2_DQSB_Driving_Table[2] = { 0xEE, 0xEE };
-
-// DQ Driving
-// Reg0xE2, 0xE3
-// For DDR2: According to bank to set DRAM DQ Driving
-static const u8 DDR2_DQA_Driving_Table[4] = { 0xAC, 0xAC, 0xAC, 0xAC };
-static const u8 DDR2_DQB_Driving_Table[2] = { 0xCA, 0xCA };
-
-// CS Driving
-// Reg0xE4, 0xE5
-// According to #Bank to set DRAM CS Driving
-// DDR1 #Bank          1     2     3     4         5         6     7     8
-static const u8 DDR2_CSA_Driving_Table_x8[4] =  { 0x44, 0x44, 0x44, 0x44 };
-static const u8 DDR2_CSB_Driving_Table_x8[2] =  { 0x44, 0x44 };
-static const u8 DDR2_CSA_Driving_Table_x16[4] = { 0x44, 0x44, 0x44, 0x44 };
-static const u8 DDR2_CSB_Driving_Table_x16[2] = { 0x44, 0x44 };
-
-// MAA Driving
-// Reg0xE8, Reg0xE9
-static const u8 DDR2_MAA_Driving_Table[MA_Table][5] = {
-	// Chip number, 400,  533,  667   800    ;(SRAS, SCAS, SWE)RxE8
-	{6,             0x86, 0x86, 0x86, 0x86}, // total MAA chips = 00 ~ 06
-	{18,            0x86, 0x86, 0x86, 0x86}, // total MAA chips = 06 ~ 18
-	{255,           0xDB, 0xDB, 0xDB, 0xDB}, // total MAA chips = 18 ~
-};
-
-static const u8 DDR2_MAB_Driving_Table[MA_Table][2] = {
-	// Chip number, Value                    ;(SRAS, SCAS, SWE)RxE9
-	{6,             0x86},			 // total MAB chips = 00 ~ 06
-	{18,            0x86},			 // total MAB chips = 06 ~ 18
-	{255,           0xDB},			 // total MAB chips = 18 ~
-};
-
-// DCLK Driving
-// Reg0xE6, 0xE7
-// For DDR2: According to #Freq to set DRAM DCLK Driving
-//                              freq            400M, 533M, 667M, 800M
-static const u8 DDR2_DCLKA_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-static const u8 DDR2_DCLKB_Driving_Table[4] = { 0xFF, 0xFF, 0xFF, 0xFF };
-
-/*
- * Duty cycle
- * Duty cycle Control for DQ/DQS/DDRCKG in ChA & ChB
- * D0F3RxEC/D0F3RxED/D0F3RxEE/D0F3RxEF
- * According to DRAM frequency to control Duty Cycle
- */
-static const u8 ChA_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0xEC, 0x00, 0x30, 0x30, 0x30, 0x30},	// 1Rank
-	{0xEE, 0x0F, 0x40, 0x40, 0x00, 0x00},
-	{0xEF, 0xCF, 0x00, 0x30, 0x30, 0x30},
-};
-
-static const u8 ChB_Duty_Control_DDR2[DUTY_CYCLE_REG_NUM][DUTY_CYCLE_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0xED, 0x00, 0x88, 0x88, 0x84, 0x88},	// 1Rank
-	{0xEE, 0xF0, 0x00, 0x00, 0x00, 0x00},
-	{0xEF, 0xFC, 0x00, 0x00, 0x00, 0x00},
-};
-
-/*
- * DRAM Clock Phase Control for FeedBack Mode
- * Modify NB Reg: Rx90[7]/Rx91/Rx92/Rx93/Rx94
- * Processing:
- *   1. Program VIA_NB3DRAM_REG90[7]=0b for FeedBack mode.
- *   2. Program clock phase value with ChA/B DCLK enable,
- *      VIA_NB3DRAM_REG91[7:3]=00b
- *   3. Check ChB rank #, if 0, VIA_NB3DRAM_REG91[7]=1b, to disable ChB DCLKO
- *      ChA DCLKO can't be disabled, so always program VIA_NB3DRAM_REG91[3]=0b.
- */
-static const u8 DDR2_ChA_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x91, 0xF8, 0x02, 0x01, 0x00, 0x07},	// 1Rank
-	{0x92, 0xF8, 0x04, 0x03, 0x03, 0x02},
-	{0x93, 0xF8, 0x06, 0x05, 0x04, 0x03},
-};
-
-static const u8 DDR2_ChB_Clk_Phase_Table_1R[3][Clk_Phase_Table_DDR2_Width] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x91, 0x0F, 0x20, 0x10, 0x00, 0x70},	// 1Rank
-	{0x92, 0x0F, 0x40, 0x30, 0x30, 0x20},
-	{0x93, 0x0F, 0x60, 0x50, 0x40, 0x30},
-};
-
-/* vt6413c */
-#if 0
-static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = {
-	//     (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x91, 0xF8, 0x04, 0x03, 0x04, 0x01 },	// 1Rank
-	{0x92, 0xF8, 0x03, 0x06, 0x05, 0x04 },
-	{0x93, 0xF8, 0x03, 0x07, 0x06, 0x05 },
-};
-#endif
-
-/* vt6413d */
-static const u8 DDR2_ChA_Clk_Phase_Table_2R[3][Clk_Phase_Table_DDR2_Width] = {
-	//     (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x91, 0xF8, 0x02, 0x01, 0x00, 0x07},	// 1Rank
-	{0x92, 0xF8, 0x04, 0x03, 0x03, 0x02},
-	{0x93, 0xF8, 0x06, 0x05, 0x04, 0x03},
-};
-
-/*
- * DRAM Write Data phase control
- * Modify NB Reg: Rx74/Rx75/Rx76
- */
-/* vt6413c */
-#if 0
-static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x74, 0xF8, 0x03, 0x04, 0x05, 0x02 },	// 1Rank
-	{0x75, 0xF8, 0x03, 0x04, 0x05, 0x02 },
-	{0x76, 0x00, 0x10, 0x80, 0x00, 0x07 },
-};
-#endif
-
-/* vt6413D */
-static const u8 DDR2_ChA_WrtData_Phase_Table[WrtData_REG_NUM][WrtData_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x74, 0xF8, 0x01, 0x00, 0x00, 0x07},	// 1Rank
-	{0x75, 0xF8, 0x01, 0x00, 0x00, 0x07},
-	{0x76, 0x10, 0x80, 0x87, 0x07, 0x06},
-	{0x8C, 0xFC, 0x03, 0x03, 0x03, 0x03},
-};
-
-#if 0
-static const u8 DDR2_ChB_WrtData_Phase_Table[WrtData_REG_NUM ][WrtData_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x74, 0x8F, 0x30, 0x40, 0x30, 0x20 },	// 1Rank
-	{0x75, 0x8F, 0x30, 0x40, 0x30, 0x20 },
-	{0x8A, 0x00, 0x10, 0x80, 0x07, 0x07 },
-};
-#endif
-
-/*
- * DQ/DQS Output Delay Control
- * Modify NB D0F3: RxF0/RxF1/RxF2/RxF3
- */
-static const u8 DDR2_CHA_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = {
-	//RxF0 RxF1  RxF2  RxF3
-	{0x00, 0x00, 0x00, 0x00},	/* DDR400 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR533 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR667 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR800 */
-};
-
-static const u8 DDR2_CHB_DQ_DQS_Delay_Table[4][DQ_DQS_Delay_Table_Width] = {
-	//RxF4 RxF5  RxF6  RxF7
-	{0x00, 0x00, 0x00, 0x00},	/* DDR400 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR533 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR667 */
-	{0x00, 0x00, 0x00, 0x00},	/* DDR800 */
-};
-
-/*
- * DQ/DQS input Capture Control
- * modify NB D0F3_Reg:Rx78/Rx79/Rx7A/Rx7B
- */
-/* vt6413C */
-#if 0
-static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM ][DQS_INPUT_CAPTURE_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x78, 0x00, 0x83, 0x8D, 0x87, 0x83 },	// 1Rank
-	{0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00 },
-	{0x7B, 0x00, 0x10, 0x30, 0x20, 0x10 }
-};
-#endif
-
-/* vt6413D */
-static const u8 DDR2_ChA_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x78, 0xC0, 0x0D, 0x07, 0x03, 0x01},	// 1Rank
-	{0x7A, 0xF0, 0x00, 0x00, 0x00, 0x00},
-	{0x7B, 0x00, 0x34, 0x34, 0x20, 0x10}
-};
-
-static const u8 DDR2_ChB_DQS_Input_Capture_Tbl[DQS_INPUT_CAPTURE_REG_NUM][DQS_INPUT_CAPTURE_FREQ_NUM] = {
-	//    (And NOT) DDR800 DDR667 DDR533 DDR400
-	//Reg  Mask  Value Value Value Value
-	{0x79, 0x00, 0x89, 0x89, 0x87, 0x83},	// 1Rank
-	{0x7A, 0x0F, 0x00, 0x00, 0x00, 0x00},
-	{0x8B, 0x00, 0x34, 0x34, 0x20, 0x10}
-};
-
-static const u8 Fixed_DQSA_1_2_Rank_Table[4][2] = {
-	//Rx70 Rx71
-	{0x00, 0x05},		/* DDR800 */
-	{0x00, 0x06},		/* DDR667 */
-	{0x00, 0x04},		/* DDR533 */
-	{0x00, 0x05},		/* DDR400 */
-};
-
-static const u8 Fixed_DQSA_3_4_Rank_Table[4][2] = {
-	//Rx70 Rx71
-	{0x00, 0x04},		/* DDR800 */
-	{0x00, 0x04},		/* DDR667 */
-	{0x00, 0x03},		/* DDR533 */
-	{0x00, 0x04},		/* DDR400 */
-};
diff --git a/src/mainboard/via/epia-m700/fadt.c b/src/mainboard/via/epia-m700/fadt.c
deleted file mode 100644
index cd95773778..0000000000
--- a/src/mainboard/via/epia-m700/fadt.c
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * ACPI - create the Fixed ACPI Description Tables (FADT)
- *
- * Copyright (C) 2004 Nick Barker <nick.barker9@btinternet.com>
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <string.h>
-#include <arch/acpi.h>
-#include "northbridge/via/vx800/vx800.h"
-
-void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
-{
-	acpi_header_t *header = &(fadt->header);
-
-	memset((void *)fadt, 0, sizeof(acpi_fadt_t));
-	memcpy(header->signature, "FACP", 4);
-	header->length = 244;
-	header->revision = 3;
-	memcpy(header->oem_id, OEM_ID, 6);
-	memcpy(header->oem_table_id, ACPI_TABLE_CREATOR, 8);
-	memcpy(header->asl_compiler_id, ASLC, 4);
-	header->asl_compiler_revision = 0;
-
-	fadt->firmware_ctrl = (u32)facs;
-	fadt->dsdt = (u32)dsdt;
-	fadt->preferred_pm_profile = 0;
-	fadt->sci_int = 0x9;
-
-	fadt->smi_cmd = VX800_ACPI_IO_BASE + 0x2F;
-	fadt->acpi_enable = 0xA1;
-	fadt->acpi_disable = 0xA0;
-
-	/*
-	 * Value 42F,A1,A0, if we don't want SMI, then set them to zero.
-	 * fadt->smi_cmd = 0x0;
-	 * fadt->acpi_enable = 0x0;
-	 * fadt->acpi_disable = 0x0;
-	 */
-
-	fadt->s4bios_req = 0x0;
-	fadt->pstate_cnt = 0x0;
-
-	fadt->pm1a_evt_blk = VX800_ACPI_IO_BASE;
-	fadt->pm1b_evt_blk = 0x0;
-	fadt->pm1a_cnt_blk = VX800_ACPI_IO_BASE + 0x4;
-	fadt->pm1b_cnt_blk = 0x0;
-	fadt->pm2_cnt_blk = 0x22;	/* To support cpu-c3. */
-	/* fadt->pm2_cnt_blk = 0x0; */
-	fadt->pm_tmr_blk = VX800_ACPI_IO_BASE + 0x8;
-	fadt->gpe0_blk = VX800_ACPI_IO_BASE + 0x20;
-	fadt->gpe1_blk = VX800_ACPI_IO_BASE + 0x50;
-
-	fadt->pm1_evt_len = 4;
-	fadt->pm1_cnt_len = 2;
-	fadt->pm2_cnt_len = 1;	/* To support cpu-c3. */
-	/* fadt->pm2_cnt_len = 0; */
-
-	fadt->pm_tmr_len = 4;
-	fadt->gpe0_blk_len = 4;
-	fadt->gpe1_blk_len = 4;
-	fadt->gpe1_base = 0x10;
-	fadt->cst_cnt = 0;
-
-	fadt->p_lvl2_lat = 0x50;	/* This is the coreboot source. */
-	fadt->p_lvl3_lat = 0x320;
-	/* fadt->p_lvl2_lat = 0x80; */
-	/* fadt->p_lvl3_lat = 0x800; */
-	/* fadt->p_lvl2_lat = 0x1; */
-	/* fadt->p_lvl3_lat = 0x23; */
-
-	/* fadt->p_lvl2_lat = 0x200; */	/* Disable. */
-	/* fadt->p_lvl3_lat = 0x2000; */
-
-	fadt->flush_size = 0;
-	fadt->flush_stride = 0;
-	fadt->duty_offset = 0;
-	/* fadt->duty_width = 1; */
-	fadt->duty_width = 4;
-	fadt->day_alrm = 0x7d;
-	fadt->mon_alrm = 0x7e;
-	fadt->century = 0x32;
-	fadt->iapc_boot_arch = 0x0;
-	fadt->flags = 0xa5;
-
-	fadt->reset_reg.space_id = 0;
-	fadt->reset_reg.bit_width = 0;
-	fadt->reset_reg.bit_offset = 0;
-	fadt->reset_reg.resv = 0;
-	fadt->reset_reg.addrl = 0x0;
-	fadt->reset_reg.addrh = 0x0;
-
-	fadt->reset_value = 0;
-	fadt->x_firmware_ctl_l = (u32)facs;
-	fadt->x_firmware_ctl_h = 0;
-	fadt->x_dsdt_l = (u32)dsdt;
-	fadt->x_dsdt_h = 0;
-
-	fadt->x_pm1a_evt_blk.space_id = 1;
-	fadt->x_pm1a_evt_blk.bit_width = 4;
-	fadt->x_pm1a_evt_blk.bit_offset = 0;
-	fadt->x_pm1a_evt_blk.resv = 0;
-	fadt->x_pm1a_evt_blk.addrl = VX800_ACPI_IO_BASE;
-	fadt->x_pm1a_evt_blk.addrh = 0x0;
-
-	fadt->x_pm1b_evt_blk.space_id = 1;
-	fadt->x_pm1b_evt_blk.bit_width = 4;
-	fadt->x_pm1b_evt_blk.bit_offset = 0;
-	fadt->x_pm1b_evt_blk.resv = 0;
-	fadt->x_pm1b_evt_blk.addrl = 0x0;
-	fadt->x_pm1b_evt_blk.addrh = 0x0;
-
-	fadt->x_pm1a_cnt_blk.space_id = 1;
-	fadt->x_pm1a_cnt_blk.bit_width = 2;
-	fadt->x_pm1a_cnt_blk.bit_offset = 0;
-	fadt->x_pm1a_cnt_blk.resv = 0;
-	fadt->x_pm1a_cnt_blk.addrl = VX800_ACPI_IO_BASE + 0x4;
-	fadt->x_pm1a_cnt_blk.addrh = 0x0;
-
-	fadt->x_pm1b_cnt_blk.space_id = 1;
-	fadt->x_pm1b_cnt_blk.bit_width = 2;
-	fadt->x_pm1b_cnt_blk.bit_offset = 0;
-	fadt->x_pm1b_cnt_blk.resv = 0;
-	fadt->x_pm1b_cnt_blk.addrl = 0x0;
-	fadt->x_pm1b_cnt_blk.addrh = 0x0;
-
-	/* fadt->x_pm2_cnt_blk.space_id = 1; */
-	fadt->x_pm2_cnt_blk.space_id = 0;
-	fadt->x_pm2_cnt_blk.bit_width = 0;
-	fadt->x_pm2_cnt_blk.bit_offset = 0;
-	fadt->x_pm2_cnt_blk.resv = 0;
-	fadt->x_pm2_cnt_blk.addrl = 0x0;
-	fadt->x_pm2_cnt_blk.addrh = 0x0;
-
-	fadt->x_pm_tmr_blk.space_id = 1;
-	fadt->x_pm_tmr_blk.bit_width = 4;
-	fadt->x_pm_tmr_blk.bit_offset = 0;
-	fadt->x_pm_tmr_blk.resv = 0;
-	fadt->x_pm_tmr_blk.addrl = VX800_ACPI_IO_BASE + 0x8;
-	fadt->x_pm_tmr_blk.addrh = 0x0;
-
-	fadt->x_gpe0_blk.space_id = 1;
-	fadt->x_gpe0_blk.bit_width = 0;
-	fadt->x_gpe0_blk.bit_offset = 0;
-	fadt->x_gpe0_blk.resv = 0;
-	fadt->x_gpe0_blk.addrl = VX800_ACPI_IO_BASE + 0x20;
-	fadt->x_gpe0_blk.addrh = 0x0;
-
-	fadt->x_gpe1_blk.space_id = 1;
-	fadt->x_gpe1_blk.bit_width = 0;
-	fadt->x_gpe1_blk.bit_offset = 0;
-	fadt->x_gpe1_blk.resv = 0;
-	fadt->x_gpe1_blk.addrl = 0x0;
-	fadt->x_gpe1_blk.addrh = 0x0;
-
-	header->checksum = acpi_checksum((void *)fadt, sizeof(acpi_fadt_t));
-}
diff --git a/src/mainboard/via/epia-m700/get_dsdt.sh b/src/mainboard/via/epia-m700/get_dsdt.sh
deleted file mode 100755
index 3a49006155..0000000000
--- a/src/mainboard/via/epia-m700/get_dsdt.sh
+++ /dev/null
@@ -1,39 +0,0 @@
-#!/bin/bash
-##
-## This file is part of the coreboot project.
-##
-## Copyright (C) 2009 One Laptop per Child, Association, Inc.
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-## GNU General Public License for more details.
-##
-
-# Simple script to dump the factory ACPI DSDT and convert it to C.
-# Must be run as root on some systems, and always run on the target machine.
-
-if [ ! iasl ]; then
-	echo "Intel ASL Compiler required to recompile DSDT table."
-fi
-
-if [ ! -f /proc/acpi/dsdt ]; then
-	echo "Cannot find DSDT table, check that your kernel supports and uses ACPI."
-fi
-
-cat /proc/acpi/dsdt > dsdt
-if [ ! -f dsdt ]; then
-	echo "Failed copying DSDT, please check your permissions."
-fi
-
-iasl -d -vr -vs dsdt
-iasl -tc -vr -vs dsdt.dsl
-mv dsdt.hex dsdt.c
-echo "Done, cleaning up."
-rm -f dsdt dsdt.dsl dsdt.aml dsdt.hex
-exit
diff --git a/src/mainboard/via/epia-m700/irq_tables.c b/src/mainboard/via/epia-m700/irq_tables.c
deleted file mode 100644
index 97625f6016..0000000000
--- a/src/mainboard/via/epia-m700/irq_tables.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
-	PIRQ_SIGNATURE,		/* u32 signature */
-	PIRQ_VERSION,		/* u16 version   */
-	32 + 16 * CONFIG_IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
-	0x00,			/* Where the interrupt router lies (bus) */
-	(0x11 << 3) | 0x0,	/* Where the interrupt router lies (dev) */
-	0xca0,			/* IRQs devoted exclusively to PCI usage */
-	0x1106,			/* Vendor */
-	0x596,			/* Device */
-	0,			/* Miniport */
-	{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, /* u8 rfu[11] */
-	0xdb,			/* Checksum. 0xa0? */
-	{
-		/* bus,        dev | fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
-		{0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x1, 0x0},
-		{0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x2, 0x0},
-		{0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x3, 0x0},
-		{0x04, (0x04 << 3) | 0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}, {0x01, 0xdeb8}}, 0x4, 0x0},
-		{0x04, (0x0e << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x5, 0x0},
-		{0x00, (0x11 << 3) | 0x0, {{0x00, 0xdeb8}, {0x00, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x0f << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x01 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x10 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x02 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x03 << 3) | 0x0, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x03 << 3) | 0x1, {{0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}, {0x09, 0xdeb8}}, 0x0, 0x0},
-		{0x00, (0x14 << 3) | 0x0, {{0x01, 0xdeb8}, {0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x05, 0xdeb8}}, 0x0, 0x0},
-	}
-};
-
-inline unsigned long write_pirq_routing_table(unsigned long addr)
-{
-	return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c
deleted file mode 100644
index 6bf7a154a2..0000000000
--- a/src/mainboard/via/epia-m700/romstage.c
+++ /dev/null
@@ -1,656 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/*
- * Part of this file is from cx700 port, part of is from cn700 port,
- * and acpi_is_wakeup_early_via_VX800() is part of Rudolf's S3 patch.
- */
-
-#define PAYLOAD_IS_SEABIOS 0
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/acpi.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <console/console.h>
-#include <lib.h>
-#include <northbridge/via/vx800/vx800.h>
-#include <cpu/x86/bist.h>
-#include <delay.h>
-#include <string.h>
-/* This file contains the board-special SI value for raminit.c. */
-#include "driving_clk_phase_data.c"
-#include <northbridge/via/vx800/raminit.h>
-#include "northbridge/via/vx800/raminit.c"
-#include "wakeup.h"
-#include <superio/winbond/common/winbond.h>
-#include <superio/winbond/w83697hf/w83697hf.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, W83697HF_SP1)
-#define SUPERIO_DEV PNP_DEV(0x2e, 0)
-
-/*
- * This acpi_is_wakeup_early_via_VX800 is from Rudolf's patch on the list:
- * https://www.coreboot.org/pipermail/coreboot/2008-January/028787.html.
- */
-static int acpi_is_wakeup_early_via_vx800(void)
-{
-	pci_devfn_t dev;
-	u16 tmp, result;
-
-	printk(BIOS_DEBUG, "In acpi_is_wakeup_early_via_vx800\n");
-	/* Power management controller */
-	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
-				       PCI_DEVICE_ID_VIA_VX855_LPC), 0);
-
-	if (dev == PCI_DEV_INVALID)
-		die("Power management controller not found\n");
-
-	/* Set ACPI base address to I/O VX800_ACPI_IO_BASE. */
-	pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 0x1);
-
-	/* Enable ACPI access RTC signal gated with PSON. */
-	pci_write_config8(dev, 0x81, 0x84);
-
-	tmp = inw(VX800_ACPI_IO_BASE + 0x04);
-	result = ((tmp & (7 << 10)) >> 10) == 1 ? 3 : 0;
-	printk(BIOS_DEBUG, "         boot_mode=%04x\n", result);
-	return result;
-}
-
-/* All content of this function came from the cx700 port of coreboot. */
-static void enable_mainboard_devices(void)
-{
-	pci_devfn_t dev;
-#if 0
-	/*
-	 * Add and close this switch, since some line cause error, some
-	 * written at elsewhere (stage1 stage2).
-	 */
-	u8 regdata;
-	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
-				       PCI_DEVICE_ID_VIA_VX855_LPC), 0);
-
-	/* Disable GP3. */
-	pci_write_config8(dev, 0x98, 0x00);
-
-	pci_write_config8(dev, 0x50, 0x80);	/* Disable mc97. */
-
-	/*
-	 * Martin: Disable internal KBC configuration.
-	 *
-	 * Internal Config is needed to decide which key can be pressed to
-	 * resume from s3.
-	 */
-	pci_write_config8(dev, 0x51, 0x2d);
-
-	/* This causes irq0 can not be triggerd, since bit 5 was set to 0. */
-	/* pci_write_config8(dev, 0x58, 0x42); */
-
-	/* These writing may... TODO */
-	regdata = pci_read_config8(dev, 0x58);
-	regdata |= 0x41;
-	pci_write_config8(dev, 0x58, regdata);
-	pci_write_config8(dev, 0x59, 0x80);
-	pci_write_config8(dev, 0x5b, 0x01);
-#endif
-
-	printk(BIOS_DEBUG, "In enable_mainboard_devices\n");
-
-	/* Enable P2P Bridge Header for external PCI bus. */
-	dev = pci_locate_device(PCI_ID(0x1106, 0xa353), 0);
-	pci_write_config8(dev, 0x4f, 0x41);
-
-	/*
-	 * "5324" already is the default value of the PCI IDE device, cancel
-	 * this PCI write.
-	 *
-	 * [william 20080124]: Fix bug that can not boot Ubuntu at the
-	 * beginning time.
-	 */
-#if 0
-	dev = 0;
-	dev = pci_locate_device(PCI_ID(0x1106, PCI_DEVICE_ID_VIA_VX855_IDE), 0);
-
-	uint16_t values;
-	values = pci_read_config16(dev, 0xBA);
-	values &= ~0xffff;
-	values |= 0x5324;
-	pci_write_config16(dev, 0xBA, values);
-#endif
-}
-
-/*
- * Most content of this function came from the cx700 port of coreboot.
- * Turn on the shadow of E-seg.
- */
-static void enable_shadow_ram(void)
-{
-	uint8_t shadowreg;
-
-	/*
-	 * Changed the value from 0x2a to 0x3f. "read only" may block "write"?
-	 * and maybe in C-seg "write" will be needed?
-	 */
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0xff);
-
-	/* 0xf0000-0xfffff - ACPI tables */
-	shadowreg = pci_read_config8(PCI_DEV(0, 0, 3), 0x83);
-	shadowreg |= 0x30;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x83, shadowreg);
-
-	/* 0xe0000-0xeffff - elfload? */
-	/*
-	 * In s3 resume process, wakeup.c, I use E-seg to hold the code
-	 * (which can not locate in the area to be covered) that will copy
-	 * 0-A-seg and F-seg from TOP-mem back to their normal location.
-	 */
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x82, 0xff);
-
-#if 0
-	/* Enable shadow RAM as normal DRAM */
-	/* 0xc0000-0xcffff - VGA BIOS */
-	pci_write_config8(PCI_DEV(0, 0, 3), 0x80, 0x2a);
-	pci_write_config8(PCI_DEV(0, 0, 7), 0x61, 0x00);
-	/* 0xd0000-0xdffff - ?? */
-	/* pci_write_config8(PCI_DEV(0, 0, 3), 0x81, 0xff); */
-	/* pci_write_config8(PCI_DEV(0, 0, 7), 0x62, 0xff); */
-
-	/* Do it again for the vlink controller. */
-	shadowreg = pci_read_config8(PCI_DEV(0, 0, 7), 0x63);
-	shadowreg |= 0x30;
-	pci_write_config8(PCI_DEV(0, 0, 7), 0x63, shadowreg);
-#endif
-}
-
-/*
- * Added this table 2008-11-28.
- * This table contains the value needed to be set before begin to init DRAM.
- * Note: REV_Bx should be checked for changes when porting a new board!
- */
-static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
-	/* VT3409 no PCI-E */
-	{ 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E },	// Set Exxxxxxx as pcie mmio config range
-	{ 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B },	// Support extended cfg address of pcie
-	// { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control
-	// Set ROMSIP value by software
-
-	/*
-	{ 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pullup Driving = 3
-	{ 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pulldown Driving = 3
-	{ 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pullup Driving = 3
-	{ 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pulldown Driving = 3
-	{ 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21 }, // Memory I/F timing ctrl
-	{ 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1 }, // Memory I/F timing ctrl
-	{ 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18 }, // AGTL+ I/O Circuit
-	{ 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C }, // AGTL+ Compensation Status
-	{ 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33 }, // 2X AGTL+ Auto Compensation Offset
-	{ 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33 }, // 4X AGTL+ Auto Compensation Offset
-	{ 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72 }, // AGTL Compensation Status
-	{ 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77 }, // AGTL Compensation Status
-	{ 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44 }, // Input Host Address / Host Strobe Delay Control for HA Group
-	{ 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22 }, // Input Host Address / Host Strobe Delay Control for HA Group
-	{ 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00 }, // Output Delay Control of PAD for HA Group
-	{ 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA }, // Host Address / Address Clock Output Delay Control (Only for P4 Bus)
-	{ 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	{ 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	{ 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	{ 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
-	{ 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 1
-	{ 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00 }, // Output Delay of PAD for HDSTB
-	{ 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00 }, // Output Delay of PAD for HD
-	{ 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 0)
-	{ 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 1)
-	{ 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 2)
-	{ 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 3)
-	*/
-
-	// CPU Host Bus Control
-	{ 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08 },	// Request phase ctrl: Dynamic Defer Snoop Stall Count = 8
-	// { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F },	// CPU I/F Ctrl-1: Disable Fast DRDY and RAW
-	{ 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C },	// CPU I/F Ctrl-1: Disable Fast DRDY and RAW
-	{ 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB },	// CPU I/F Ctrl-2: Enable all for performance
-	// { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88 },	// Arbitration: Host/Master Occupancy timer = 8*4 HCLK
-	{ 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44 },	// Arbitration: Host/Master Occupancy timer = 4*4 HCLK
-	{ 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C },	// Misc Ctrl: Enable 8QW burst Mem Access
-	// { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06 },	// Miscellaneous Control 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04 },	// Miscellaneous Control 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63 },	// Write Policy 1
-	// { 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01 },	// CPU Miscellaneous Control 1, enable Lowest-Priority IPL
-	// { 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00 },	// CPU Miscellaneous Control 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2 },	// Write Policy
-	{ 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88 },	// Bandwidth Timer
-	{ 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46 },	// CPU Misc Ctrl
-	// { 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B },	// CPU Miscellaneous Control 3
-	// { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B },	// CPU Miscellaneous Control 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A },	// CPU Miscellaneous Control 2
-	{ 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41 },	// CPU Miscellaneous Control 3
-	{ 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06 },	// CPU Miscellaneous Control 4
-
-	// Set APIC and SMRAM
-	{ 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00 },	// APIC Related Control
-	{ 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29 },	// SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg
-	{ 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }	// End of the table
-};
-
-#define USE_VCP     1		/* 0 means "use DVP". */
-#define USE_COM1    1
-#define USE_COM2    0
-
-#define gCom1Base   0x3f8
-#define gCom2Base   0x2f8
-
-#if 0
-static void EmbedComInit(void)
-{
-	u8 ByteVal;
-	u16 ComBase;
-
-	/* Enable NB multiple function control. */
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 0), 0x4f);
-	ByteVal = ByteVal | 0x01;
-	pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, ByteVal);
-
-	/* VGA enable. */
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA1);
-	ByteVal = ByteVal | 0x80;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0xA1, ByteVal);
-
-	ByteVal = pci_read_config8(PCI_DEV(0, 0, 3), 0xA7);
-	ByteVal = ByteVal | 0x08;
-	pci_write_config8(PCI_DEV(0, 0, 3), 0xA7, ByteVal);
-
-	/* Enable P2P IO/mem. */
-	ByteVal = pci_read_config8(PCI_DEV(0, 1, 0), 0x4);
-	ByteVal = ByteVal | 0x07;
-	pci_write_config8(PCI_DEV(0, 1, 0), 0x4, ByteVal);
-
-	/* Turn on graphic chip I/O port port access. */
-	ByteVal = inb(0x3C3);
-	ByteVal = ByteVal | 0x01;
-	outb(ByteVal, 0x3C3);
-
-	/* Turn off graphic chip register protection. */
-	outb(0x10, 0x3C4);
-	ByteVal = inb(0x3C5);
-	ByteVal = ByteVal | 0x01;
-	outb(ByteVal, 0x3C5);
-
-	/* South module pad share enable 0x3C5.78[7]. */
-	outb(0x78, 0x3C4);
-	ByteVal = inb(0x3C5);
-	ByteVal = ByteVal | 0x80;
-	outb(ByteVal, 0x3C5);
-
-	/* Enable UART function multiplex with DVP or VCP pad D17F0Rx46[7,6]. */
-	ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0x46);
-	if (USE_VCP == 1)
-		ByteVal = (ByteVal & 0x3F) | 0x40; /* Multiplex with VCP. */
-	else
-		ByteVal = (ByteVal & 0x3F) | 0xC0; /* Multiplex with DVP. */
-	pci_write_config8(PCI_DEV(0, 17, 0), 0x46, ByteVal);
-
-	/* Enable embedded COM1 and COM2 D17F0RxB0[5,4]. */
-	ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xB0);
-	ByteVal = ByteVal & 0xcf;
-	/* Multiplex with VCP. */
-	if (USE_COM1 == 1)
-		ByteVal = ByteVal | 0x10;
-	if (USE_COM2 == 1)
-		ByteVal = ByteVal | 0x20;
-	pci_write_config8(PCI_DEV(0, 17, 0), 0xB0, ByteVal);
-
-	if (USE_COM1 == 1)
-		ComBase = gCom1Base;
-	else
-		ComBase = gCom2Base;
-
-//noharddrive
-
-	/* Set embedded COM1 I/O base = 0x3E8 (D17F0RB4, ByteVal = 0xFD) */
-	if (USE_COM1 == 1) {
-		ByteVal = (u8) ((gCom1Base >> 3) | 0x80);
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB4, ByteVal);
-		ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
-		ByteVal = (ByteVal & 0xf0) | 0x04;
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
-	}
-
-	/* Set embedded COM2 I/O base = 0x2E8 (D17F0RB5, ByteVal = 0xDD). */
-	if (USE_COM2 == 1) {
-		ByteVal = (u8) ((gCom2Base >> 3) | 0x80);
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB5, ByteVal);
-		ByteVal = pci_read_config8(PCI_DEV(0, 17, 0), 0xb2);
-		ByteVal = (ByteVal & 0x0f) | 0x30;
-		pci_write_config8(PCI_DEV(0, 17, 0), 0xB2, ByteVal);
-	}
-	/* No port 80 biger then 0x10. */
-
-	/* Disable interrupt. */
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal & 0x7F, ComBase + 3);
-	outb(0x00, ComBase + 1);
-
-	/* Set BAUD rate. */
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal | 0x80, ComBase + 3);
-	outb(0x01, ComBase);
-	outb(0x00, ComBase + 1);
-
-	/* Set frame format. */
-	ByteVal = inb(ComBase + 3);
-	outb(ByteVal & 0x3F, ComBase + 3);
-	outb(0x03, ComBase + 3);
-	outb(0x00, ComBase + 2);
-	outb(0x00, ComBase + 4);
-
-	/* SOutput("Embedded COM output\n"); */
-	/* while (1); */
-}
-#endif
-
-/* cache_as_ram.inc jumps to here. */
-void main(unsigned long bist)
-{
-	u16 boot_mode;
-	u8 rambits, Data8, Data;
-	pci_devfn_t device;
-	/* device_t dev; */
-
-	/*
-	 * Enable multifunction for northbridge. These 4 lines (until
-	 * console_init()) are the same with epia-cn port.
-	 */
-	pci_write_config8(PCI_DEV(0, 0, 0), 0x4f, 0x01);
-	/* EmbedComInit(); */
-	winbond_set_clksel_48(SUPERIO_DEV);
-	winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
-	/* enable_vx800_serial(); */
-
-	/*
-	 * 1. D15F0
-	 * a) RxBAh = 71h
-	 * b) RxBBh = 05h
-	 * c) RxBEh = 71h
-	 * d) RxBFh = 05h
-	 *
-	 * 2. D17F0
-	 * a) RxA0h = 06h
-	 * b) RxA1h = 11h
-	 * c) RxA2h = 27h
-	 * d) RxA3h = 32h
-	 * e) Rx79h = 40h
-	 * f) Rx72h = 27h
-	 * g) Rx73h = 32h
-	*/
-
-	pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBA,
-			   PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_write_config16(PCI_DEV(0, 0xf, 0), 0xBE,
-			   PCI_DEVICE_ID_VIA_VX855_IDE);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA0, PCI_VENDOR_ID_VIA);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0xA2,
-			   PCI_DEVICE_ID_VIA_VX855_LPC);
-	Data8 = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x79);
-	Data8 &= ~0x40;
-	Data8 |= 0x40;
-	pci_write_config8(PCI_DEV(0, 0x11, 0), 0x79, Data8);
-	pci_write_config16(PCI_DEV(0, 0x11, 0), 0x72,
-			   PCI_DEVICE_ID_VIA_VX855_LPC);
-
-	/*
-	 * There are two function definitions of console_init(), while the
-	 * src/arch/x86/lib is the right one.
-	 */
-	console_init();
-
-	/* Decide if this is a s3 wakeup or a normal boot. */
-	boot_mode = acpi_is_wakeup_early_via_vx800();
-
-	/*
-	 * 2008-11-27 Add this, to transfer "cpu restart" to "cold boot".
-	 * When this boot is not a S3 resume, and PCI registers had been
-	 * written, then this must be a CPU restart (result of OS reboot cmd),
-	 * so we need a real "cold boot".
-	 */
-	if ((boot_mode != 3)
-	    && (pci_read_config8(PCI_DEV(0, 0, 3), 0x80) != 0)) {
-		outb(6, 0xcf9);
-	}
-
-	/* x86 cold boot I/O cmd. */
-	/* These 2 lines are the same with epia-cn port. */
-	enable_smbus();
-
-	/* This fix does help vx800!, but vx855 doesn't need this. */
-	/* smbus_fixup(ctrl.channel0, ARRAY_SIZE(ctrl.channel0)); */
-
-	/* Halt if there was a built-in self test failure. */
-	report_bist_failure(bist);
-
-	printk(BIOS_DEBUG, "Enabling mainboard devices\n");
-	enable_mainboard_devices();
-
-	/*
-	 * Get NB chip revision from D0F4RxF6, revision will be used in
-	 * via_pci_inittable.
-	 */
-	device = PCI_DEV(0, 0, 4);
-	Data = pci_read_config8(device, 0xf6);
-	printk(BIOS_DEBUG, "NB chip revision = %02x\n", Data);
-
-	/* Make NB ready before DRAM init. */
-	via_pci_inittable(Data, mNbStage1InitTbl);
-
-	/*
-	 * When resume from s3, DRAM init is skipped, so need to recovery
-	 * any PCI register related to DRAM init. d0f3 didn't lose its power
-	 * during whole s3 time, so any register not belonging to d0f3 needs
-	 * to be recovered.
-	 */
-#if 1
-	if (boot_mode == 3) {
-		u8 i;
-		u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 };
-		DRAM_SYS_ATTR DramAttr;
-
-		printk(BIOS_DEBUG, "This is an S3 wakeup\n");
-
-		memset(&DramAttr, 0, sizeof(DRAM_SYS_ATTR));
-		/*
-		 * Step 1: DRAM detection; DDR1 or DDR2; Get SPD Data;
-		 * Rank Presence; 64 or 128bit; Unbuffered or registered;
-		 * 1T or 2T.
-		 */
-		DRAMDetect(&DramAttr);
-
-		/*
-		 * Begin to get RAM size, 43,42 41 40 contains the end
-		 * address of last rank in DDR2 slot.
-		 */
-		device = PCI_DEV(0, 0, 3);
-		for (rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
-			rambits = pci_read_config8(device, ramregs[i]);
-			if (rambits != 0)
-				break;
-		}
-
-		DRAMDRDYSetting(&DramAttr);
-
-		Data = 0x80;	/* This value is same with DevInit.c. */
-		pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data);
-		pci_write_config8(PCI_DEV(0, 17, 7), 0x60, rambits << 2);
-		Data = pci_read_config8(MEMCTRL, 0x88);
-		pci_write_config8(PCI_DEV(0, 17, 7), 0xE5, Data);
-
-		/* Just copy this function from draminit to here! */
-		DRAMRegFinalValue(&DramAttr);
-
-		/* Just copy this function from draminit to here! */
-		SetUMARam();
-
-		printk(BIOS_DEBUG, "Resume from S3, RAM init was ignored\n");
-	} else {
-		ddr2_ram_setup();
-		ram_check(0, 640 * 1024);
-	}
-#endif
-
-	/* ddr2_ram_setup(); */
-	/* This line is the same with cx700 port. */
-	enable_shadow_ram();
-
-	/*
-	 * For coreboot most time of S3 resume is the same as normal boot,
-	 * so some memory area under 1M become dirty, so before this happen,
-	 * I need to backup the content of mem to top-mem.
-	 *
-	 * I will reserve the 1M top-men in LBIO table in coreboot_table.c
-	 * and recovery the content of 1M-mem in wakeup.c.
-	 */
-#if PAYLOAD_IS_SEABIOS == 1
-	if (boot_mode == 3) {
-		/* An idea of Libo.Feng at amd.com in
-		 * https://www.coreboot.org/pipermail/coreboot/2008-December/043111.html
-		 *
-		 * I want move the 1M data, I have to set some MTRRs myself.
-		 * Setting MTRR before back memory save s3 resume time about
-		 * 0.14 seconds.
-		 *
-		 * !!! Since CAR stack uses cache, and we are using cache
-		 * here, we must be careful:
-		 *
-		 * 1. during this MTRR code, must no function call (after
-		 *    this MTRR, I think it should be OK to use function).
-		 * 2. Before stack switch, no use variable that have value
-		 *    set before this.
-		 * 3. Due to 2, take care of "cpu_reset", I directlly set it
-		 *    to ZERO.
-		 */
-		u32 memtop = *(u32 *) WAKE_MEM_INFO;
-		u32 memtop1 = *(u32 *) WAKE_MEM_INFO - 0x100000;
-		u32 memtop2 = *(u32 *) WAKE_MEM_INFO - 0x200000;
-		u32 memtop3 = *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000;
-		u32 memtop4 =
-		    *(u32 *) WAKE_MEM_INFO - 64 * 1024 - 0x100000 + 0xe0000;
-#if 0
-		__asm__ volatile (
-			"movl $0x204, %%ecx\n\t"
-			"xorl %%edx, %%edx\n\t"
-			"movl %0,%%eax\n\t"
-			"orl $(0 | 6), %%eax\n\t"
-			"wrmsr\n\t"
-
-			"movl $0x205, %%ecx\n\t"
-			"xorl %%edx, %%edx\n\t"
-			"movl $0x100000,%%eax\n\t"
-			"decl %%eax\n\t"
-			"notl %%eax\n\t"
-			"orl $(0 | 0x800), %%eax\n\t"
-			"wrmsr\n\t"
-			::"g"(memtop2)
-		);
-
-		__asm__ volatile (
-			"movl $0x206, %%ecx\n\t"
-			"xorl %%edx, %%edx\n\t"
-			"movl %0,%%eax\n\t"
-			"orl $(0 | 6), %%eax\n\t"
-			"wrmsr\n\t"
-
-			"movl $0x207, %%ecx\n\t"
-			"xorl %%edx, %%edx\n\t"
-			"movl $0x100000,%%eax\n\t"
-			"decl %%eax\n\t"
-			"notl %%eax\n\t"
-			"orl $(0 | 0x800), %%eax\n\t"
-			"wrmsr\n\t"
-			::"g"(memtop1)
-		);
-
-		__asm__ volatile (
-			"movl $0x208, %ecx\n\t"
-			"xorl %edx, %edx\n\t"
-			"movl $0,%eax\n\t"
-			"orl $(0 | 6), %eax\n\t"
-			"wrmsr\n\t"
-
-			"movl $0x209, %ecx\n\t"
-			"xorl %edx, %edx\n\t"
-			"movl $0x100000,%eax\n\t"
-			"decl %eax\n\t"
-			"notl %eax\n\t"
-			"orl $(0 | 0x800), %eax\n\t"
-			"wrmsr\n\t"
-		);
-#endif
-
-		/*
-		 * WAKE_MEM_INFO is inited in get_set_top_available_mem()
-		 * in tables.c these two memcpy() not not be enabled if set
-		 * the MTRR around this two lines.
-		 */
-#if 0
-		__asm__ volatile (
-			"movl $0, %%esi\n\t"
-			"movl %0, %%edi\n\t"
-			"movl $0xa0000, %%ecx\n\t"
-			"shrl $2, %%ecx\n\t"
-			"rep movsd\n\t"
-			::"g"(memtop3)
-		);
-
-		__asm__ volatile (
-			"movl $0xe0000, %%esi\n\t"
-			"movl %0, %%edi\n\t"
-			"movl $0x20000, %%ecx\n\t"
-			"shrl $2, %%ecx\n\t"
-			"rep movsd\n\t"
-			::"g"(memtop4)
-		);
-#endif
-		/* This can have function call, because no variable used before this. */
-		printk(BIOS_DEBUG, "Copy memory to high memory to protect s3 wakeup vector code\n");
-		memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 -
-				 0x100000), (unsigned char *)0, 0xa0000);
-		memcpy((unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 -
-		 0x100000 + 0xe0000), (unsigned char *)0xe0000, 0x20000);
-
-		/* Restore the MTRR previously modified. */
-#if 0
-		__asm__ volatile (
-			"wbinvd\n\t"
-			"xorl %edx, %edx\n\t"
-			"xorl %eax, %eax\n\t"
-			"movl $0x204, %ecx\n\t"
-			"wrmsr\n\t"
-			"movl $0x205, %ecx\n\t"
-			"wrmsr\n\t"
-			"movl $0x206, %ecx\n\t"
-			"wrmsr\n\t"
-			"movl $0x207, %ecx\n\t"
-			"wrmsr\n\t"
-			"movl $0x208, %ecx\n\t"
-			"wrmsr\n\t"
-			"movl $0x209, %ecx\n\t"
-			"wrmsr\n\t"
-		);
-#endif
-	}
-#endif
-}
diff --git a/src/mainboard/via/epia-m700/wakeup.c b/src/mainboard/via/epia-m700/wakeup.c
deleted file mode 100644
index f4c2d852c6..0000000000
--- a/src/mainboard/via/epia-m700/wakeup.c
+++ /dev/null
@@ -1,448 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz>
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-/* FIXME This code should be dropped and instead the generic resume code
- * should be used.
- */
-
-/* Parts of this code is taken from reboot.c from Linux. */
-
-/*
- * This file mostly copied from Rudolf's S3 patch, some changes in
- * acpi_jump_wake().
- */
-
-#include <compiler.h>
-#include <stdint.h>
-#include <string.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <delay.h>
-#include "wakeup.h"
-
-int enable_a20(void);
-
-/*
- * The following code and data reboots the machine by switching to real
- * mode and jumping to the BIOS reset entry point, as if the CPU has
- * really been reset. The previous version asked the keyboard
- * controller to pulse the CPU reset line, which is more thorough, but
- * doesn't work with at least one type of 486 motherboard. It is easy
- * to stop this code working; hence the copious comments.
- */
-
-static unsigned long long real_mode_gdt_entries[3] = {
-	0x0000000000000000ULL,	/* Null descriptor */
-	0x00009a000000ffffULL,	/* 16-bit real-mode 64k code at 0x00000000 */
-	0x000092000100ffffULL	/* 16-bit real-mode 64k data at 0x00000100 */
-};
-
-struct Xgt_desc_struct {
-	unsigned short size;
-	unsigned long address __packed;
-	unsigned short pad;
-} __packed;
-
-static struct Xgt_desc_struct real_mode_gdt = {
-	sizeof(real_mode_gdt_entries) - 1,
-	(long)real_mode_gdt_entries
-},
-real_mode_idt = {0x3ff, 0},
-no_idt = { 0, 0 };
-
-/*
- * This is 16-bit protected mode code to disable paging and the cache,
- * switch to real mode and jump to the BIOS reset code.
- *
- * The instruction that switches to real mode by writing to CR0 must be
- * followed immediately by a far jump instruction, which set CS to a
- * valid value for real mode, and flushes the prefetch queue to avoid
- * running instructions that have already been decoded in protected
- * mode.
- *
- * Clears all the flags except ET, especially PG (paging), PE
- * (protected-mode enable) and TS (task switch for coprocessor state
- * save). Flushes the TLB after paging has been disabled. Sets CD and
- * NW, to disable the cache on a 486, and invalidates the cache. This
- * is more like the state of a 486 after reset. I don't know if
- * something else should be done for other chips.
- *
- * More could be done here to set up the registers as if a CPU reset had
- * occurred; hopefully real BIOSs don't assume much.
- */
-
-//      0x66, 0x0d, 0x00, 0x00, 0x00, 0x60,     /* orl $0x60000000, %eax */
-
-static unsigned char real_mode_switch[] = {
-	0x66, 0x0f, 0x20, 0xc0,			/* movl %cr0,%eax */
-	0x24, 0xfe,				/* andb $0xfe,al */
-	0x66, 0x0f, 0x22, 0xc0			/* movl %eax,%cr0 */
-};
-
-static unsigned char jump_to_wakeup[] = {
-	0xea, 0x00, 0x00, 0x00, 0xe0		/* ljmp $0xffff, $0x0000 */
-};
-
-void acpi_jump_wake(u32 vector)
-{
-	u32 dwEip;
-	struct Xgt_desc_struct *wake_thunk16_Xgt_desc;
-
-	printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO %x\n", vector);
-	if (enable_a20())
-		die("failed to enable A20\n");
-	printk(BIOS_DEBUG, "IN ACPI JUMP WAKE TO 3 %x\n", vector);
-
-	*((u16 *) (jump_to_wakeup + 3)) = (u16) (vector >> 4);
-	printk(BIOS_DEBUG, "%x %x %x %x %x\n", jump_to_wakeup[0], jump_to_wakeup[1],
-		     jump_to_wakeup[2], jump_to_wakeup[3], jump_to_wakeup[4]);
-
-	memcpy((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100),
-	       real_mode_switch, sizeof(real_mode_switch));
-	memcpy((void *)(WAKE_THUNK16_ADDR - 100), jump_to_wakeup,
-	       sizeof(jump_to_wakeup));
-
-	//jason_tsc_count();
-	printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-	//jason_tsc_count_end();
-
-	unsigned long long *real_mode_gdt_entries_at_eseg;
-	real_mode_gdt_entries_at_eseg = (void *)WAKE_THUNK16_GDT;	/* Copy from real_mode_gdt_entries and change limition to 1M and data base to 0; */
-	real_mode_gdt_entries_at_eseg[0] = 0x0000000000000000ULL;	/* Null descriptor */
-	real_mode_gdt_entries_at_eseg[1] = 0x000f9a000000ffffULL;	/* 16-bit real-mode 1M code at 0x00000000 */
-	real_mode_gdt_entries_at_eseg[2] = 0x000f93000000ffffULL;	/* 16-bit real-mode 1M data at 0x00000000 */
-
-	wake_thunk16_Xgt_desc = (void *)WAKE_THUNK16_XDTR;
-	wake_thunk16_Xgt_desc[0].size = sizeof(real_mode_gdt_entries) - 1;
-	wake_thunk16_Xgt_desc[0].address = (long)real_mode_gdt_entries_at_eseg;
-	wake_thunk16_Xgt_desc[1].size = 0x3ff;
-	wake_thunk16_Xgt_desc[1].address = 0;
-	wake_thunk16_Xgt_desc[2].size = 0;
-	wake_thunk16_Xgt_desc[2].address = 0;
-
-	/* Added this code to get current value of EIP. */
-	__asm__ volatile (
-		"calll geip\n\t"
-		"geip: \n\t"
-		"popl %0\n\t"
-		: "=a" (dwEip)
-	);
-
-	unsigned char *dest, *src;
-	src = (unsigned char *)dwEip;
-	dest = (void *)WAKE_RECOVER1M_CODE;
-	u32 i;
-	for (i = 0; i < 0x200; i++)
-		dest[i] = src[i];
-
-	__asm__ __volatile__("ljmp $0x0010,%0"	/* 08 error */
-			     ::"i"((void *)(WAKE_RECOVER1M_CODE + 0x20)));
-
-	/* Added 0x20 "nop" to make sure the ljmp will not jump then halt. */
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-	asm volatile ("nop");
-
-	__asm__ volatile (
-		/*
-		 * Set new esp, maybe ebp should not equal to esp?, due to the
-		 * variable in acpi_jump_wake?, anyway, this may be not a big
-		 * problem. and I didn't clear the area (ef000+-0x200) to zero.
-		 */
-		"movl %0, %%ebp\n\t"
-		"movl %0, %%esp\n\t"::"a" (WAKE_THUNK16_STACK)
-	);
-
-	/*
-	 * Only "src" and "dest" use the new stack, and the esp maybe also
-	 * used in resumevector.
-	 */
-#if PAYLOAD_IS_SEABIOS == 1
-	/* WAKE_MEM_INFO inited in get_set_top_available_mem in tables.c. */
-	src =
-	    (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024 - 0x100000);
-	dest = 0;
-
-	/*
-	 * If recovered 0-e0000, then when resume, before WinXP turn on the
-	 * desktop screen, there is gray background which last 1sec.
-	 */
-	for (i = 0; i < 0xa0000; i++)
-		dest[i] = src[i];
-
-#if 0
-	__asm__ volatile (
-		"movl %0, %%esi\n\t"
-		"movl $0, %%edi\n\t"
-		"movl $0xa0000, %%ecx\n\t"
-		"shrl $2, %%ecx\n\t"
-		"rep movsd\n\t"
-		::"a"(src)
-	);
-#endif
-	src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024
-			- 0x100000 + 0xc0000);
-
-#if 0
-	dest = 0xc0000;
-	for (i = 0; i < 0x20000; i++)
-	      dest[i] = src[i];
-
-	__asm__ volatile (
-		"movl %0, %%esi\n\t"
-		"movl $0xc0000, %%edi\n\t"
-		"movl $0x20000, %%ecx\n\t"
-		"shrl $2, %%ecx\n\t"
-		"rep movsd\n\t"
-		::"a"(src)
-	);
-#endif
-
-	src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024
-			- 0x100000 + 0xe0000 + WAKE_SPECIAL_SIZE);
-
-	/* dest = 0xf0000; */
-	/* for (i = 0; i < 0x10000; i++) */
-	/* 	dest[i] = src[i]; */
-	__asm__ volatile (
-		"movl %0, %%esi\n\t"
-		"movl %1, %%edi\n\t"
-		"movl %2, %%ecx\n\t"
-		"shrl $2, %%ecx\n\t"
-		"rep movsd\n\t"::"r" (src),
-		"r"(0xe0000 + WAKE_SPECIAL_SIZE),
-		"r"(0x10000 - WAKE_SPECIAL_SIZE)
-	);
-
-	src = (unsigned char *)((*(u32 *) WAKE_MEM_INFO) - 64 * 1024
-			- 0x100000 + 0xf0000);
-	/* dest = 0xf0000; */
-	/* for (i = 0; i < 0x10000; i++) */
-	/* 	dest[i] = src[i]; */
-	__asm__ volatile (
-		"movl %0, %%esi\n\t"
-		"movl $0xf0000, %%edi\n\t"
-		"movl $0x10000, %%ecx\n\t"
-		"shrl $2, %%ecx\n\t" "rep movsd\n\t"::"a" (src)
-	);
-
-	asm volatile ("wbinvd");
-#endif
-	/* Set up the IDT for real mode. */
-	asm volatile ("lidt %0"::"m" (wake_thunk16_Xgt_desc[1]));
-
-	/*
-	 * Set up a GDT from which we can load segment descriptors for real
-	 * mode. The GDT is not used in real mode; it is just needed here to
-	 * prepare the descriptors.
-	 */
-	asm volatile ("lgdt %0"::"m" (wake_thunk16_Xgt_desc[0]));
-
-	/*
-	 * Load the data segment registers, and thus the descriptors ready for
-	 * real mode.  The base address of each segment is 0x100, 16 times the
-	 * selector value being loaded here.  This is so that the segment
-	 * registers don't have to be reloaded after switching to real mode:
-	 * the values are consistent for real mode operation already.
-	 */
-	__asm__ __volatile__(
-		"movl $0x0010,%%eax\n"
-		"\tmovl %%eax,%%ds\n"
-		"\tmovl %%eax,%%es\n"
-		"\tmovl %%eax,%%fs\n"
-		"\tmovl %%eax,%%gs\n"
-		"\tmovl %%eax,%%ss":::"eax"
-	);
-
-	/*
-	 * Jump to the 16-bit code that we copied earlier. It disables paging
-	 * and the cache, switches to real mode, and jumps to the BIOS reset
-	 * entry point.
-	 */
-
-	__asm__ __volatile__(
-		"ljmp $0x0008,%0"::"i"
-		((void *)(WAKE_THUNK16_ADDR - sizeof(real_mode_switch) - 100))
-	);
-}
-
-/* -*- linux-c -*- ------------------------------------------------------- *
- *
- *   Copyright (C) 1991, 1992 Linus Torvalds
- *   Copyright 2007 rPath, Inc. - All Rights Reserved
- *
- *   This file is part of the Linux kernel, and is made available under
- *   the terms of the GNU General Public License version 2.
- *
- * ----------------------------------------------------------------------- */
-
-/*
- * arch/x86/boot/a20.c
- *
- * Enable A20 gate (return -1 on failure)
- */
-
-#define MAX_8042_LOOPS	100000
-
-static int empty_8042(void)
-{
-	u8 status;
-	int loops = MAX_8042_LOOPS;
-
-	while (loops--) {
-		udelay(1);
-
-		status = inb(0x64);
-		if (status & 1) {
-			/* Read and discard input data */
-			udelay(1);
-			(void)inb(0x60);
-		} else if (!(status & 2)) {
-			/* Buffers empty, finished! */
-			return 0;
-		}
-	}
-
-	return -1;
-}
-
-/* Returns nonzero if the A20 line is enabled.  The memory address
-   used as a test is the int $0x80 vector, which should be safe. */
-
-#define A20_TEST_ADDR	(4*0x80)
-#define A20_TEST_SHORT  32
-#define A20_TEST_LONG	2097152	/* 2^21 */
-
-static int a20_test(int loops)
-{
-	int ok = 0;
-	int saved, ctr;
-
-	saved = ctr = *((u32 *) A20_TEST_ADDR);
-
-	while (loops--) {
-
-		*((u32 *) A20_TEST_ADDR) = ++ctr;
-
-		udelay(1);	/* Serialize and make delay constant */
-
-		ok = *((u32 *) A20_TEST_ADDR + 0xffff0 + 0x10) ^ ctr;
-		if (ok)
-			break;
-	}
-
-	*((u32 *) A20_TEST_ADDR) = saved;
-	return ok;
-}
-
-/* Quick test to see if A20 is already enabled */
-static int a20_test_short(void)
-{
-	return a20_test(A20_TEST_SHORT);
-}
-
-/* Longer test that actually waits for A20 to come on line; this
-   is useful when dealing with the KBC or other slow external circuitry. */
-static int a20_test_long(void)
-{
-	return a20_test(A20_TEST_LONG);
-}
-
-static void enable_a20_kbc(void)
-{
-	empty_8042();
-
-	outb(0xd1, 0x64);	/* Command write */
-	empty_8042();
-
-	outb(0xdf, 0x60);	/* A20 on */
-	empty_8042();
-}
-
-static void enable_a20_fast(void)
-{
-	u8 port_a;
-
-	port_a = inb(0x92);	/* Configuration port A */
-	port_a |= 0x02;		/* Enable A20 */
-	port_a &= ~0x01;	/* Do not reset machine */
-	outb(port_a, 0x92);
-}
-
-/*
- * Actual routine to enable A20; return 0 on ok, -1 on failure
- */
-
-#define A20_ENABLE_LOOPS 255	/* Number of times to try */
-
-int enable_a20(void)
-{
-	int loops = A20_ENABLE_LOOPS;
-
-	while (loops--) {
-		/* First, check to see if A20 is already enabled
-		   (legacy free, etc.) */
-		if (a20_test_short())
-			return 0;
-
-		/* Try enabling A20 through the keyboard controller */
-		empty_8042();
-
-		// if (a20_test_short())
-		// 	return 0; /* BIOS worked, but with delayed reaction */
-
-		enable_a20_kbc();
-		if (a20_test_long())
-			return 0;
-
-		/* Finally, try enabling the "fast A20 gate" */
-		enable_a20_fast();
-		if (a20_test_long())
-			return 0;
-	}
-
-	return -1;
-}
diff --git a/src/mainboard/via/epia-m700/wakeup.h b/src/mainboard/via/epia-m700/wakeup.h
deleted file mode 100644
index 7f4621de6c..0000000000
--- a/src/mainboard/via/epia-m700/wakeup.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2009 One Laptop per Child, Association, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef WAKEUP_H
-#define WAKEUP_H
-
-#define WAKE_SPECIAL_AREA	0xE0000
-#define WAKE_SPECIAL_SIZE	0x1000
-#define WAKE_THUNK16_ADDR	(WAKE_SPECIAL_AREA + 0x200)
-#define WAKE_THUNK16_GDT	(WAKE_SPECIAL_AREA + 0x300)
-#define WAKE_THUNK16_XDTR	(WAKE_SPECIAL_AREA + 0x350)
-#define WAKE_MEM_INFO		(WAKE_SPECIAL_AREA + 0x400)
-#define WAKE_RECOVER1M_CODE	(WAKE_SPECIAL_AREA + 0x500)
-#define WAKE_THUNK16_STACK	(WAKE_SPECIAL_AREA + 0xf00)
-
-#endif