- Updates to config.g so that it works more reliably and has initial support

  for paths
- Renamed some configuration variables
  SMP -> CONFIG_SMP
  MAX_CPUS -> CONFIG_MAX_CPUS
  MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
- Removed some dead configuration variables
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
SMP -> CONFIG_SMP
FINAL_MAINBOARD_FIXUP
SIO_BASE
SIO_SYSTEM_CLK_INPUT
NO_KEYBOARD
USE_NORMAL_IMAGE
SERIAL_CONSOLE
USE_ELF_BOOT
ENABLE_FIXED_AND_VARIABLE_MTRRS
START_CPU_SEG
DISABLE_WATCHDOG
ENABLE_IOMMU
AMD8111_DEV

- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
- Updates to config.g so that it works more reliably and has initial support
  for paths
- Renamed some configuration variables
  SMP -> CONFIG_SMP
  MAX_CPUS -> CONFIG_MAX_CPUS
  MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
- Removed some dead configuration variables
MAX_CPUS -> CONFIG_MAX_CPUS
MAX_PHYSICAL_CPUS -> CONFIG_MAX_PHYSICAL_CPUS
SMP -> CONFIG_SMP
FINAL_MAINBOARD_FIXUP
SIO_BASE
SIO_SYSTEM_CLK_INPUT
NO_KEYBOARD
USE_NORMAL_IMAGE
SERIAL_CONSOLE
USE_ELF_BOOT
ENABLE_FIXED_AND_VARIABLE_MTRRS
START_CPU_SEG
DISABLE_WATCHDOG
ENABLE_IOMMU
AMD8111_DEV

- Removed some assembly files that are no longer needed
killed src/southbridge/amd/amd8111/smbus.inc
killed src/southbrideg/amd/amd8111/cmos_boot_failover.inc
killed src/ram/ramtest.inc
killed src/sdram/generic_dump_spd.inc
killed src/sdram/generic_dump_spd.inc

- Updated the arima/hdama to build with the new configuration system
- Updated config.g to list all of the variables with make echo


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1093 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

38 files changed, 496 insertions, 725 deletions

diff --git a/NEWS b/NEWS
index 853de1b747..d15769d515 100644
--- a/NEWS
+++ b/NEWS
@@ -1,3 +1,9 @@
+- 1.1.1
+  Updates to the new configuration system so it works more reliably
+  Removed a bunch of unused configuration variables
+  Removed a bunch of unused assembly code
+- 1.1.0
+  A whole bunch of random ppc and opteron work we never put a good label on
 - 1.1.0
 Intial development release of LinuxBIOS.
 Everything is thrown overboard and will be reincluded as necessary so we can
diff --git a/documentation/RFC/config.tex b/documentation/RFC/config.tex
index 652e7bc467..d73f96db83 100644
--- a/documentation/RFC/config.tex
+++ b/documentation/RFC/config.tex
@@ -205,13 +205,11 @@ ldscript cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript cpu/i386/reset16.lds 
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript cpu/i386/reset16.lds 
+else
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript cpu/i386/reset32.lds 
 end
 .
 .
@@ -229,13 +227,6 @@ makerule ./auto.inc dep "./romcc ./auto.E" act "./romcc -O ./auto.E > auto.inc"
 mainboardinit ./auto.inc
 #
 ###
-### Setup RAM
-###
-mainboardinit ram/ramtest.inc
-mainboardinit southbridge/amd/amd8111/smbus.inc
-mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -286,7 +277,7 @@ export ARCH:=i386
 export _RAMBASE:=0x4000
 export ROM_IMAGE_SIZE:=65535
 export PAYLOAD_SIZE:=131073
-export MAX_CPUS:=1
+export CONFIG_MAX_CPUS:=1
 export HEAP_SIZE:=8192
 export STACK_SIZE:=8192
 export MEMORY_HOLE:=0
diff --git a/src/arch/i386/boot/tables.c b/src/arch/i386/boot/tables.c
index 1b840ff379..513167188c 100644
--- a/src/arch/i386/boot/tables.c
+++ b/src/arch/i386/boot/tables.c
@@ -20,7 +20,7 @@ static void remove_logical_cpus(unsigned long *processor_map)
 	if (disable_logical_cpus) {
 		/* disable logical cpus */
 		int cnt;
-		for(cnt=MAX_PHYSICAL_CPUS;cnt<MAX_CPUS;cnt++)
+		for(cnt=CONFIG_MAX_PHYSICAL_CPUS;cnt<CONFIG_MAX_CPUS;cnt++)
 			processor_map[cnt]=0;
 		printk_debug("logical cpus disabled\n");
 	}
diff --git a/src/arch/i386/include/arch/smp/mpspec.h b/src/arch/i386/include/arch/smp/mpspec.h
index 96b2ab3e6b..e780593df6 100644
--- a/src/arch/i386/include/arch/smp/mpspec.h
+++ b/src/arch/i386/include/arch/smp/mpspec.h
@@ -268,7 +268,7 @@ void *smp_write_floating_table(unsigned long addr);
 unsigned long write_smp_table(unsigned long addr, unsigned long *processor_map);
 
 /* A table (per mainboard) listing the initial apicid of each cpu. */
-extern unsigned long initial_apicid[MAX_CPUS];
+extern unsigned long initial_apicid[CONFIG_MAX_CPUS];
 
 #else /* HAVE_MP_TABLE */
 static inline 
diff --git a/src/arch/i386/lib/c_start.S b/src/arch/i386/lib/c_start.S
index 4c4146ec83..602fc51cbd 100644
--- a/src/arch/i386/lib/c_start.S
+++ b/src/arch/i386/lib/c_start.S
@@ -45,10 +45,10 @@ _start:
 	movl	APIC_ID(%edi), %eax
 	shrl	$24, %eax
 
-	/* Get the cpu index (MAX_CPUS on error) */
+	/* Get the cpu index (CONFIG_MAX_CPUS on error) */
 	movl	$-4, %ebx
 1:	addl	$4, %ebx
-	cmpl	$(MAX_CPUS << 2), %ebx
+	cmpl	$(CONFIG_MAX_CPUS << 2), %ebx
 	je	2
 	cmpl	%eax, initial_apicid(%ebx)
 	jne	1b
diff --git a/src/arch/i386/smp/mpspec.c b/src/arch/i386/smp/mpspec.c
index ff935bb996..d7b8c3e2f0 100644
--- a/src/arch/i386/smp/mpspec.c
+++ b/src/arch/i386/smp/mpspec.c
@@ -108,7 +108,7 @@ void smp_write_processors(struct mp_config_table *mc,
 	cpuid(1, &eax, &ebx, &ecx, &edx);
 	cpu_features = eax;
 	cpu_feature_flags = edx;
-	for(i = 0; i < MAX_CPUS; i++) {
+	for(i = 0; i < CONFIG_MAX_CPUS; i++) {
 		unsigned long cpu_apicid = initial_apicid[i];
 		unsigned long cpu_flag;
 		if(initial_apicid[i]==-1)
diff --git a/src/arch/i386/smp/secondary.S b/src/arch/i386/smp/secondary.S
index 78c55764b0..c27d6282b0 100644
--- a/src/arch/i386/smp/secondary.S
+++ b/src/arch/i386/smp/secondary.S
@@ -48,10 +48,10 @@ _secondary_start:
 	movl	(APIC_ID + APIC_DEFAULT_BASE), %edi
 	shrl	$24, %edi
 
-	/* Get the cpu index (MAX_CPUS on error) */
+	/* Get the cpu index (CONFIG_MAX_CPUS on error) */
 	movl	$-4, %ebx
 1:	addl	$4, %ebx
-	cmpl	$(MAX_CPUS << 2), %ebx
+	cmpl	$(CONFIG_MAX_CPUS << 2), %ebx
 	je	2
 	cmpl	%edi, initial_apicid(%ebx)
 	jne	1b
diff --git a/src/arch/i386/smp/start_stop.c b/src/arch/i386/smp/start_stop.c
index bb8868a8d9..b40452403c 100644
--- a/src/arch/i386/smp/start_stop.c
+++ b/src/arch/i386/smp/start_stop.c
@@ -5,13 +5,6 @@
 #include <string.h>
 #include <console/console.h>
 
-#ifndef START_CPU_SEG
-#define START_CPU_SEG 0x90000
-#endif
-#if (START_CPU_SEG&0xffff) != 0
-#error START_CPU_SEG must be 64k aligned
-#endif
-
 static inline void hlt(void)
 {
 	asm("hlt");
@@ -26,7 +19,7 @@ unsigned long this_processors_id(void)
 int processor_index(unsigned long apicid)
 {
 	int i;
-	for(i = 0; i < MAX_CPUS; i++) {
+	for(i = 0; i < CONFIG_MAX_CPUS; i++) {
 		if (initial_apicid[i] == apicid) {
 			return i;
 		}
@@ -230,7 +223,7 @@ void startup_other_cpus(unsigned long *processor_map)
 	int i;
 
 	/* Assume the cpus are densly packed by apicid */
-	for(i = 0; i < MAX_CPUS; i++) {
+	for(i = 0; i < CONFIG_MAX_CPUS; i++) {
 		unsigned long cpu_apicid = initial_apicid[i];
 		if (cpu_apicid == -1) {
 			printk_err("CPU %d not found\n",i);
diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index ff0909fd97..2bff70ce93 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -60,7 +60,7 @@ it with the version available from LANL.
  * info per processor at some point. I hope we don't need 
  * anything more complex than an int.
  */
-static unsigned long processor_map[MAX_CPUS];
+static unsigned long processor_map[CONFIG_MAX_CPUS];
 
 static struct mem_range *get_ramsize(void)
 {
@@ -114,7 +114,7 @@ static void wait_for_other_cpus(void)
 		}
 		active_count = atomic_read(&active_cpus);
 	}
-	for(i = 0; i < MAX_CPUS; i++) {
+	for(i = 0; i < CONFIG_MAX_CPUS; i++) {
 		if (!(processor_map[i] & CPU_ENABLED)) {
 			printk_err("CPU %d did not initialize!\n", i);
 			processor_map[i] = 0;
diff --git a/src/config/Options.lb b/src/config/Options.lb
index edc19ee7a7..7cec869077 100644
--- a/src/config/Options.lb
+++ b/src/config/Options.lb
@@ -117,7 +117,7 @@ define OBJCOPY
 	comment "Objcopy command"
 end
 define LINUXBIOS_VERSION
-	default "1.1.0"
+	default "1.1.1"
 	export always
 	comment "LinuxBIOS version"
 end
@@ -148,7 +148,7 @@ define LINUXBIOS_COMPILE_HOST
 end
 
 define LINUXBIOS_COMPILE_DOMAIN
-	default ""
+	default "$(shell dnsdomainname)"
 	export always
 	comment "Build domain name"
 end
@@ -183,16 +183,10 @@ define HAVE_FALLBACK_BOOT
 	comment "Set if fallback booting required"
 end
 define USE_FALLBACK_IMAGE
-	default 0
+	default 1
 	export used
 	comment "Set to build a fallback image"
 end
-define USE_NORMAL_IMAGE
-	format "%d"
-	default {!USE_FALLBACK_IMAGE}
-	export used
-	comment "Set to build a normal image"
-end
 define FALLBACK_SIZE
 	default 65536
 	format "0x%x"
@@ -277,16 +271,16 @@ define CACHE_RAM_SIZE
 	comment "Size of cache when using it for temporary RAM"
 end
 define XIP_ROM_BASE
-	default 0xffff8000
+	default 0
 	format "0x%x"
 	export used
-	comment "base address of range of ROM that can be cached to speed up linuxBIOS"
+	comment "Start address of area to cache during LinuxBIOS execution directly from ROM"
 end
 define XIP_ROM_SIZE
-	default 0x8000
+	default 0
 	format "0x%x"
 	export used
-	comment "size of range of ROM that can be cached to speed up linuxBIOS"
+	comment "Size of area to cache during LinuxBIOS execution directly from ROM"
 end
 define CONFIG_COMPRESS
 	default 1
@@ -348,14 +342,8 @@ end
 define CONFIG_CONSOLE_SERIAL8250
 	default 0
 	export always
-	comment "Log messages to serial 8250 console"
+	comment "Log messages to 8250 uart based serial console"
 end
-define SERIAL_CONSOLE
-	default none
-	export used
-	comment "Log messages to serial console"
-end
-
 define DEFAULT_CONSOLE_LOGLEVEL
 	default 7
 	export always
@@ -373,17 +361,25 @@ define NO_POST
 	export always
 	comment "Disable POST codes"
 end
+
+define TTYS0_BASE
+	default 0x3f8
+	export always
+	comment "Base address for 8250 uart for the serial console"
+end
+
 define TTYS0_BAUD
 	default 115200
 	export always
 	comment "Default baud rate for serial console"
 end
-define NO_KEYBOARD
-	default none
-	export never
-	comment "Set if we don't have a keyboard"
-end
 
+define TTYS0_LCS
+	default 0x3
+	export always
+	comment "Default flow control settings for the 8250 serial console uart"
+end
+	
 ###############################################
 # Mainboard options
 ###############################################
@@ -403,11 +399,6 @@ define MAINBOARD_VENDOR
 	export always
 	comment "Vendor of mainboard"
 end
-define FINAL_MAINBOARD_FIXUP
-	default 0
-	export used
-	comment "Do final mainboard fixups"
-end
 define CONFIG_SYS_CLK_FREQ
 	default none
 	export used
@@ -426,22 +417,17 @@ end
 define CONFIG_MAX_CPUS
         default 1
         export always
-        comment "Config CPU count for this machine"
+        comment "Maximum CPU count for this machine"
 end
-define MAX_CPUS
-	default 1
+define CONFIG_MAX_PHYSICAL_CPUS
+	default {CONFIG_MAX_CPUS}
 	export always
-	comment "CPU count for this machine"
+	comment "Physical CPU count for this machine"
 end
 define CONFIG_LOGICAL_CPUS
-	default 1
-	export always
-	comment "Logical CPU count for this machine"
-end
-define MAX_PHYSICAL_CPUS
-	default 1
+	default 0
 	export always
-	comment "Physical CPU count for this machine"
+	comment "Should multiple cpus per die be enabled?"
 end
 define HAVE_MP_TABLE
 	default none
@@ -453,11 +439,6 @@ end
 # Boot options
 ###############################################
 
-define USE_ELF_BOOT
-	default none
-	export always
-	comment "Use ELF boot loader"
-end
 define CONFIG_IDE_STREAM
 	default 0
 	export always
@@ -541,21 +522,6 @@ define SMBUS_MEM_DEVICE_INC
 end
 
 ###############################################
-# SuperIO options
-###############################################
-
-define SIO_BASE
-	default none
-	export used
-	comment "Superio base address"
-end
-define SIO_SYSTEM_CLK_INPUT
-	default none
-	export used
-	comment "Superio CLK input default"
-end
-
-###############################################
 # Misc options
 ###############################################
 
@@ -569,57 +535,30 @@ define MEMORY_HOLE
 	export used
 	comment "Set to deal with memory hole"
 end
-define ENABLE_FIXED_AND_VARIABLE_MTRRS
-	default none
-	export used
-	comment "Enable fixed and variable mtrrs"
-end
-define START_CPU_SEG
-	default 0xf0000
-	format "0x%x"
-	export always
-	comment "Start CPU segment"
-end
 define MAX_REBOOT_CNT
-	default 2
+	default 3
 	export always
 	comment "Set maximum reboots"
 end
-define DISABLE_WATCHDOG
-	default {MAXIMUM_CONSOLE_LOGLEVEL >= 8}
-	export used
-	comment "Disable watchdog if we're doing lots of output"
-end
-define ENABLE_IOMMU
-	default 1
-	export used
-	comment "Enable IOMMU aperture"
-end
 
 ###############################################
 # Misc device options
 ###############################################
 
 define CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-	default none
+	default 0
 	export used
-	comment ""
+	comment "Use timer2 to callibrate the x86 time stamp counter"
 end
 define INTEL_PPRO_MTRR
 	default none
 	export always
 	comment ""
 end
-define AMD8111_DEV
-	default 0x3800
-	format "0x%x"
-	export used
-	comment ""
-end
 define CONFIG_UDELAY_TSC
 	default 0
 	export used
-	comment ""
+	comment "Implement udelay with the x86 time stamp counter"
 end
 
 ###############################################
diff --git a/src/config/linuxbios_c.ld b/src/config/linuxbios_c.ld
index 4340f1a135..c05a4c995e 100644
--- a/src/config/linuxbios_c.ld
+++ b/src/config/linuxbios_c.ld
@@ -87,7 +87,7 @@ SECTIONS
 	_stack = .;
 	.stack . : {
 		/* Reserve a stack for each possible cpu, +1 extra */
-		. = ((MAX_CPUS * STACK_SIZE) + STACK_SIZE) ; 
+		. = ((CONFIG_MAX_CPUS * STACK_SIZE) + STACK_SIZE) ; 
 	}
 	_estack = .;
 	_heap = .;
diff --git a/src/include/device/device.h b/src/include/device/device.h
index d5013f15da..21e5dfc5c8 100644
--- a/src/include/device/device.h
+++ b/src/include/device/device.h
@@ -1,6 +1,7 @@
 #ifndef DEVICE_H
 #define DEVICE_H
 
+#include <stdint.h>
 #include <device/resource.h>
 
 struct device;
diff --git a/src/mainboard/amd/quartet/Config.lb b/src/mainboard/amd/quartet/Config.lb
index 97634ab25a..b6d65b4cb5 100644
--- a/src/mainboard/amd/quartet/Config.lb
+++ b/src/mainboard/amd/quartet/Config.lb
@@ -1,8 +1,6 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses ENABLE_IOMMU
 #
 #
 ###
@@ -34,15 +32,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-  print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -76,15 +70,6 @@ end
 mainboardinit cpu/k8/earlymtrr.inc
 #
 #
-###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to 
-###
-#
-if USE_FALLBACK_IMAGE
-  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
-end
-#
 ####
 #### O.k. We aren't just an intermediary anymore!
 ####
@@ -94,10 +79,6 @@ end
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
 #
@@ -118,13 +99,6 @@ end
 mainboardinit ./auto.inc
 #
 ###
-### Setup RAM
-###
-mainboardinit ram/ramtest.inc
-mainboardinit southbridge/amd/amd8111/smbus.inc
-mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -142,4 +116,3 @@ cpu p6 end
 cpu k7 end
 cpu k8 end
 
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/amd/quartet/auto.c b/src/mainboard/amd/quartet/auto.c
index a347f20b70..3166f7ad3c 100644
--- a/src/mainboard/amd/quartet/auto.c
+++ b/src/mainboard/amd/quartet/auto.c
@@ -17,6 +17,8 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 
+#define SIO_BASE 0x2e
+
 static void memreset_setup(void)
 {
 	/* Set the memreset low */
diff --git a/src/mainboard/amd/quartet/mainboard.c b/src/mainboard/amd/quartet/mainboard.c
index d93d2ed1d9..0622150d64 100644
--- a/src/mainboard/amd/quartet/mainboard.c
+++ b/src/mainboard/amd/quartet/mainboard.c
@@ -5,7 +5,7 @@
 #include <device/pci_ops.h>
 
 
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0, 1, 2, 3
 };
diff --git a/src/mainboard/amd/solo/Config.lb b/src/mainboard/amd/solo/Config.lb
index f237a5cbea..12c59fdb38 100644
--- a/src/mainboard/amd/solo/Config.lb
+++ b/src/mainboard/amd/solo/Config.lb
@@ -24,8 +24,6 @@ default CONFIG_UDELAY_TSC=0
 ###
 ### Customize our winbond superio chip for this motherboard
 ###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
 option CONFIG_CONSOLE_SERIAL8250=0
 #
 ###
@@ -51,16 +49,11 @@ option IRQ_SLOT_COUNT=7
 ##option HAVE_MP_TABLE=1
 #
 ###
-### Do not build special code for the keyboard
-###
-default NO_KEYBOARD=1
-#
-###
 ### Build code for SMP support
 ### Only worry about 2 micro processors
 ###
 ##option CONFIG_SMP=1
-option MAX_CPUS=1
+option CONFIG_MAX_CPUS=1
 #
 ###
 ### Build code to setup a generic IOAPIC
@@ -79,37 +72,17 @@ option CONFIG_IOAPIC=1
 option MEMORY_HOLE=0
 #
 ###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
 ### Clean up the motherboard id strings
 ###
 option MAINBOARD_PART_NUMBER="Solo7"
 option MAINBOARD_VENDOR="AMD"
 #
 ###
-### Let Assembly code know where on the pci bus the AMD southbridge is
-###
-option AMD8111_DEV=0x3800
-#
-###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-#
-###
 ### Figure out which type of linuxBIOS image to build
 ### If we aren't a fallback image we must be a normal image
 ### This is useful for optional includes
 ###
 default USE_FALLBACK_IMAGE=0
-option USE_NORMAL_IMAGE=(! USE_FALLBACK_IMAGE)
 #
 ####
 #### LinuxBIOS layout values
@@ -144,8 +117,7 @@ default FALLBACK_SIZE=65536
 if USE_FALLBACK_IMAGE 
   option ROM_SECTION_SIZE  = FALLBACK_SIZE
   option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-end
-if USE_NORMAL_IMAGE
+else
   option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
   option ROM_SECTION_OFFSET= 0
 end
@@ -177,13 +149,6 @@ option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
 ##option XIP_ROM_BASE=0xffff8000
 #
 ###
-### Compute where the SMP startup code needs to live
-### FIXME I don't see how to make this work for the normal image....
-###
-option START_CPU_SEG=0xf0000
-#
-#
-###
 ### Set all of the defaults for an x86 architecture
 ###
 #
@@ -217,13 +182,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
+else
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -251,15 +214,6 @@ end
 mainboardinit cpu/k8/earlymtrr.inc
 #
 #
-###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to 
-###
-#
-if USE_FALLBACK_IMAGE
-  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
-end
-#
 ####
 #### O.k. We aren't just an intermediary anymore!
 ####
@@ -269,10 +223,6 @@ end
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 ###
 ### Setup the serial port
@@ -293,13 +243,6 @@ makerule ./auto.inc dep "./romcc ./auto.E" act "./romcc -O ./auto.E > auto.inc"
 mainboardinit ./auto.inc
 #
 ###
-### Setup RAM
-###
-mainboardinit ram/ramtest.inc
-mainboardinit southbridge/amd/amd8111/smbus.inc
-mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
diff --git a/src/mainboard/amd/solo/mainboard.c b/src/mainboard/amd/solo/mainboard.c
index 5690bd5afd..75a77d6adb 100644
--- a/src/mainboard/amd/solo/mainboard.c
+++ b/src/mainboard/amd/solo/mainboard.c
@@ -5,7 +5,7 @@
 #include <device/pci_ops.h>
 
 
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0
 };
diff --git a/src/mainboard/arima/hdama/Config.lb b/src/mainboard/arima/hdama/Config.lb
index db31552135..4947698590 100644
--- a/src/mainboard/arima/hdama/Config.lb
+++ b/src/mainboard/arima/hdama/Config.lb
@@ -1,168 +1,286 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
-uses ENABLE_IOMMU
-#
-#
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_STREAM_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+
 ###
-### Set all of the defaults for an x86 architecture
+### Build options
 ###
-#
-#
+
+##
+## Build code for the fallback boot
+##
+option HAVE_FALLBACK_BOOT=1
+
+##
+## Build code to reset the motherboard from linuxBIOS
+##
+option HAVE_HARD_RESET=1
+
+##
+## Build code to export a programmable irq routing table
+##
+option HAVE_PIRQ_TABLE=1
+option IRQ_SLOT_COUNT=7
+
+##
+## Build code to export an x86 MP table
+## Useful for specifying IRQ routing values
+##
+option HAVE_MP_TABLE=1
+
+##
+## Build code to export a CMOS option table
+##
+option HAVE_OPTION_TABLE=1
+
+##
+## Build code for SMP support
+## Only worry about 2 micro processors
+##
+option CONFIG_SMP=1
+option CONFIG_MAX_CPUS=2
+
+##
+## Build code to setup a generic IOAPIC
+##
+option CONFIG_IOAPIC=1
+
+##
+## Clean up the motherboard id strings
+##
+option MAINBOARD_PART_NUMBER="HDAMA"
+option MAINBOARD_VENDOR="ARIMA"
+
 ###
-### Build the objects we have code for in this directory.
+### LinuxBIOS layout values
 ###
-##object mainboard.o
+
+## ROM_SIZE is the size of boot ROM that this board will use.
+option ROM_SIZE = 524288
+
+## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
+option ROM_IMAGE_SIZE = 65536
+
+##
+## Use a small 8K stack
+##
+option STACK_SIZE=0x2000
+
+##
+## Use a small 16K heap
+##
+option HEAP_SIZE=0x4000
+
+##
+## Only use the option table in a normal image
+##
+option USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+
+##
+## Compute the location and size of where this firmware image
+## (linuxBIOS plus bootloader) will live in the boot rom chip.
+##
+if USE_FALLBACK_IMAGE
+	option ROM_SECTION_SIZE   = FALLBACK_SIZE
+	option ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+	option ROM_SECTION_SIZE   = ( ROM_SIZE - FALLBACK_SIZE )
+	option ROM_SECTION_OFFSET = 0
+end
+
+##
+## Compute the start location and size size of
+## The linuxBIOS bootloader.
+##
+option PAYLOAD_SIZE            = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+option CONFIG_ROM_STREAM     = 1
+
+##
+## Compute where this copy of linuxBIOS will start in the boot rom
+##
+option _ROMBASE      = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
+
+##
+## Compute a range of ROM that can cached to speed up linuxBIOS,
+## execution speed.
+##
+## XIP_ROM_SIZE must be a power of 2.
+## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
+##
+option XIP_ROM_SIZE=65536
+option XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
+
+##
+## Set all of the defaults for an x86 architecture
+##
+
+arch i386 end
+#cpu k8 end
+
+##
+## Build the objects we have code for in this directory.
+##
+
+#object mainboard.o
 driver mainboard.o
-object static_devices.o
+#object static_devices.o
 if HAVE_MP_TABLE object mptable.o end
 if HAVE_PIRQ_TABLE object irq_tables.o end
-#
-arch i386 end
-#cpu k8 end
-#
-###
-### Build our 16 bit and 32 bit linuxBIOS entry code
-###
+object reset.o
+
+##
+## Romcc output
+##
+makerule ./failover.E
+	depends "$(MAINBOARD)/failover.c" 
+	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
+end
+
+makerule ./failover.inc
+	depends "./failover.E ./romcc"
+	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"
+end
+
+makerule ./auto.E 
+	depends	"$(MAINBOARD)/auto.c" 
+	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
+end
+makerule ./auto.inc 
+	depends "./auto.E ./romcc"
+	action	"./romcc -mcpu=k8  -O ./auto.E > auto.inc"
+end
+
+##
+## Build our 16 bit and 32 bit linuxBIOS entry code
+##
 mainboardinit cpu/i386/entry16.inc
 mainboardinit cpu/i386/entry32.inc
 ldscript /cpu/i386/entry16.lds
 ldscript /cpu/i386/entry32.lds
-#
-###
-### Build our reset vector (This is where linuxBIOS is entered)
-###
+
+##
+## Build our reset vector (This is where linuxBIOS is entered)
+##
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-  print "NO FALLBACK USED!"
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
-end
-#
-#### Should this be in the northbridge code?
+### Should this be in the northbridge code?
 mainboardinit arch/i386/lib/cpu_reset.inc
-#
-###
-### Include an id string (For safe flashing)
-###
+
+##
+## Include an id string (For safe flashing)
+##
 mainboardinit arch/i386/lib/id.inc
 ldscript /arch/i386/lib/id.lds
-#
-####
-#### This is the early phase of linuxBIOS startup 
-#### Things are delicate and we test to see if we should
-#### failover to another image.
-####
-#option MAX_REBOOT_CNT=2
-if USE_FALLBACK_IMAGE
-  ldscript /arch/i386/lib/failover.lds 
-end
-#
-###
-### Setup our mtrrs
-###
+
+##
+## Setup our mtrrs
+##
 mainboardinit cpu/k8/earlymtrr.inc
+
 ###
-### Only the bootstrap cpu makes it here.
-### Failover if we need to 
+### This is the early phase of linuxBIOS startup 
+### Things are delicate and we test to see if we should
+### failover to another image.
 ###
-#
 if USE_FALLBACK_IMAGE
-  mainboardinit ./failover.inc
-#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
+	ldscript /arch/i386/lib/failover.lds 
+	mainboardinit ./failover.inc
 end
 
-#
-#
-###
-### Setup the serial port
-###
-#mainboardinit superiowinbond/w83627hf/setup_serial.inc
-mainboardinit pc80/serial.inc
-mainboardinit arch/i386/lib/console.inc
-#
-####
-#### O.k. We aren't just an intermediary anymore!
-####
-#
-###
-### When debugging disable the watchdog timer
 ###
-##option MAXIMUM_CONSOLE_LOGLEVEL=7
-#default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
-#
-#if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
-#
+### O.k. We aren't just an intermediary anymore!
 ###
-### Romcc output
-###
-#makerule ./failover.E dep "$(MAINBOARD)/failover.c" act "$(CPP) -I$(TOP)/src $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failever.E"
-#makerule ./failover.inc dep "./romcc ./failover.E" act "./romcc -O ./failover.E > failover.inc"
-#mainboardinit .failover.inc
-
-makerule ./failover.E
-	depends "$(MAINBOARD)/failover.c" 
-	action "$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/failover.c > ./failover.E"
-end
 
-makerule ./failover.inc
-	depends "./romcc ./failover.E"
-	action "./romcc -O -o failover.inc --label-prefix=failover ./failover.E"end
-
-makerule ./auto.E 
-	depends	"$(MAINBOARD)/auto.c" 
-	action	"$(CPP) -I$(TOP)/src $(ROMCCPPFLAGS) $(CPPFLAGS) $(MAINBOARD)/auto.c > ./auto.E"
-end
-makerule ./auto.inc 
-	depends "./romcc ./auto.E" 
-	action	"./romcc -mcpu=k8  -O ./auto.E > auto.inc"
-end
+##
+## Setup RAM
+##
 mainboardinit cpu/k8/enable_mmx_sse.inc
 mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
-#
-###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
-### Include the secondary Configuration files 
-###
-northbridge amd/amdk8
-end
-southbridge amd/amd8111 "amd8111"
-end
-southbridge amd/amd8131 "amd8131"
+
+##
+## Include the secondary Configuration files 
+##
+dir /pc80
+
+northbridge amd/amdk8 "mc0"
+	#pci 0:18.0
+	#pci 0:18.0
+	#pci 0:18.0
+	#pci 0:18.1
+	#pci 0:18.2
+	#pci 0:18.3
+	southbridge amd/amd8131 "amd8131"
+		#pci 0:0.0
+		#pci 0:0.1
+		#pci 0:1.0
+		#pci 0:1.1
+	end
+	southbridge amd/amd8111 "amd8111"
+		#pci 0:0.0
+		#pci 0:1.0
+		#pci 0:1.1
+		#pci 0:1.2
+		#pci 0:1.3
+		#pci 0:1.5 off
+		#pci 0:1.6 off
+		superio NSC/pc87360
+			#pnp 1:2e.0
+			#pnp 1:2e.1
+			#pnp 1:2e.2
+			#pnp 1:2e.3
+			#pnp 1:2e.4
+			#pnp 1:2e.5
+			#pnp 1:2e.6
+			#pnp 1:2e.7
+			#pnp 1:2e.8
+			#pnp 1:2e.9
+			#pnp 1:2e.a
+			register "com1" = "{1, 0, 0x3f8, 4}"
+			register "lpt" = "{1}"
+		end
+	end
 end
-#mainboardinit archi386/smp/secondary.inc
-superio NSC/pc87360
-	register "com1" = "{1}"
-	register "lpt" = "{1}"
+
+northbridge amd/amdk8 "mc1"
+	#pci 0:19.0
+	#pci 0:19.0
+	#pci 0:19.0
+	#pci 0:19.1
+	#pci 0:19.2
+	#pci 0:19.3
 end
-dir /pc80
-##dir /src/superio/winbond/w83627hf
-#dir /cpu/k8
-cpu k8 "cpu0" 
-  register "up" = "{.chip = &amd8111, .ht_width=8, .ht_speed=200}"
+
+cpu k8 "cpu0"
+	register "up" = "{ .chip = &amd8131, .ht_width=16, .ht_speed=600 }"
 end
 
 cpu k8 "cpu1" 
 end
 
-option ENABLE_IOMMU=1
+##
+## Include the old serial code for those few places that still need it.
+##
+mainboardinit pc80/serial.inc
+mainboardinit arch/i386/lib/console.inc
+
diff --git a/src/mainboard/arima/hdama/auto.c b/src/mainboard/arima/hdama/auto.c
index ca19245293..f977496a7b 100644
--- a/src/mainboard/arima/hdama/auto.c
+++ b/src/mainboard/arima/hdama/auto.c
@@ -1,6 +1,4 @@
 #define ASSEMBLY 1
-#define MAXIMUM_CONSOLE_LOGLEVEL 9
-#define DEFAULT_CONSOLE_LOGLEVEL 9
 
 #include <stdint.h>
 #include <device/pci_def.h>
@@ -20,6 +18,8 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 
+#define SIO_BASE 0x2e
+
 static void memreset_setup(void)
 {
 	/* Set the memreset low */
@@ -151,7 +151,7 @@ static void pc87360_enable_serial(void)
 }
 
 #define FIRST_CPU  1
-#define SECOND_CPU 0
+#define SECOND_CPU 1
 #define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
 static void main(void)
 {
@@ -209,7 +209,7 @@ static void main(void)
 	memreset_setup();
 	sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
 
-#if 1
+#if 0
 	dump_pci_devices();
 #endif
 #if 0
@@ -227,13 +227,21 @@ static void main(void)
 #endif
 #if 0
 	ram_check(0x00000000, msr.lo);
-#else
-#if TOTAL_CPUS < 2
-	/* Check 16MB of memory @ 0*/
-	ram_check(0x00000000, 0x01000);
-#else
-	/* Check 16MB of memory @ 2GB */
-	ram_check(0x80000000, 0x81000000);
 #endif
+#if 0
+	static const struct {
+		unsigned long lo, hi;
+	} check_addrs[] = {
+		/* Check 16MB of memory @ 0*/
+		{ 0x00000000, 0x01000000 },
+#if TOTAL_CPUS > 1
+		/* Check 16MB of memory @ 2GB */
+		{ 0x80000000, 0x81000000 },
+#endif
+	};
+	int i;
+	for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
+		ram_check(check_addrs[i].lo, check_addrs[i].hi);
+	}
 #endif
 }
diff --git a/src/mainboard/arima/hdama/mainboard.c b/src/mainboard/arima/hdama/mainboard.c
index 61092b799b..4f40e393b2 100644
--- a/src/mainboard/arima/hdama/mainboard.c
+++ b/src/mainboard/arima/hdama/mainboard.c
@@ -9,7 +9,7 @@
 #include "chip.h"
 
 
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0, 1,
 };
diff --git a/src/mainboard/newisys/khepri/Config.lb b/src/mainboard/newisys/khepri/Config.lb
index db31552135..2050b01367 100644
--- a/src/mainboard/newisys/khepri/Config.lb
+++ b/src/mainboard/newisys/khepri/Config.lb
@@ -1,11 +1,8 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
-uses ENABLE_IOMMU
 #
 #
 ###
@@ -37,15 +34,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-  print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -78,7 +71,6 @@ mainboardinit cpu/k8/earlymtrr.inc
 #
 if USE_FALLBACK_IMAGE
   mainboardinit ./failover.inc
-#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
 end
 
 #
@@ -99,10 +91,6 @@ mainboardinit arch/i386/lib/console.inc
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
 #
@@ -135,13 +123,6 @@ mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
 #
 ###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -165,4 +146,3 @@ end
 cpu k8 "cpu1" 
 end
 
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/newisys/khepri/auto.c b/src/mainboard/newisys/khepri/auto.c
index ca19245293..29da7aa5e3 100644
--- a/src/mainboard/newisys/khepri/auto.c
+++ b/src/mainboard/newisys/khepri/auto.c
@@ -20,6 +20,8 @@
 #include "northbridge/amd/amdk8/reset_test.c"
 #include "debug.c"
 
+#define SIO_BASE 0x2e
+
 static void memreset_setup(void)
 {
 	/* Set the memreset low */
diff --git a/src/mainboard/newisys/khepri/mainboard.c b/src/mainboard/newisys/khepri/mainboard.c
index 9e5c0acc89..88c5977cbb 100644
--- a/src/mainboard/newisys/khepri/mainboard.c
+++ b/src/mainboard/newisys/khepri/mainboard.c
@@ -9,7 +9,7 @@
 #include "chip.h"
 
 
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0, 1,
 };
diff --git a/src/mainboard/tyan/s2880/Config.lb b/src/mainboard/tyan/s2880/Config.lb
index 9c9953e927..1661015535 100644
--- a/src/mainboard/tyan/s2880/Config.lb
+++ b/src/mainboard/tyan/s2880/Config.lb
@@ -1,11 +1,8 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
-uses ENABLE_IOMMU
 #
 #
 ###
@@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-#  print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc
 #
 if USE_FALLBACK_IMAGE
   mainboardinit ./failover.inc
-#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
 end
 
 #
@@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
 #
@@ -145,13 +133,6 @@ mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
 #
 ###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -175,5 +156,3 @@ end
 
 cpu k8 "cpu1"
 end
-
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2880/mainboard.c b/src/mainboard/tyan/s2880/mainboard.c
index 8efc0a5d1b..f6daa781eb 100644
--- a/src/mainboard/tyan/s2880/mainboard.c
+++ b/src/mainboard/tyan/s2880/mainboard.c
@@ -7,7 +7,7 @@
 #include "chip.h"
 //#include <part/mainboard.h>
 //#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0,1
 };
diff --git a/src/mainboard/tyan/s2882/Config.lb b/src/mainboard/tyan/s2882/Config.lb
index 8297ecff7d..013e968656 100644
--- a/src/mainboard/tyan/s2882/Config.lb
+++ b/src/mainboard/tyan/s2882/Config.lb
@@ -1,11 +1,8 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
-uses ENABLE_IOMMU
 #
 #
 ###
@@ -45,15 +42,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-#  print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -86,7 +79,6 @@ mainboardinit cpu/k8/earlymtrr.inc
 #
 if USE_FALLBACK_IMAGE
   mainboardinit ./failover.inc
-#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
 end
 
 #
@@ -107,10 +99,6 @@ mainboardinit arch/i386/lib/console.inc
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
 #
@@ -144,13 +132,6 @@ mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
 #
 ###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -174,5 +155,3 @@ end
 
 cpu k8 "cpu1"
 end
-
-option ENABLE_IOMMU=1
diff --git a/src/mainboard/tyan/s2882/mainboard.c b/src/mainboard/tyan/s2882/mainboard.c
index 0862c87ac0..d9acaf2384 100644
--- a/src/mainboard/tyan/s2882/mainboard.c
+++ b/src/mainboard/tyan/s2882/mainboard.c
@@ -7,7 +7,7 @@
 #include "chip.h"
 //#include <part/mainboard.h>
 //#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0,1
 };
diff --git a/src/mainboard/tyan/s2885/Config.lb b/src/mainboard/tyan/s2885/Config.lb
index 81a72f728f..f3f3081591 100644
--- a/src/mainboard/tyan/s2885/Config.lb
+++ b/src/mainboard/tyan/s2885/Config.lb
@@ -1,11 +1,8 @@
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
-uses AMD8111_DEV
 uses MAINBOARD
 uses ARCH
-uses ENABLE_IOMMU
 #
 #
 ###
@@ -46,15 +43,11 @@ ldscript /cpu/i386/entry32.lds
 ### Build our reset vector (This is where linuxBIOS is entered)
 ###
 if USE_FALLBACK_IMAGE 
-  mainboardinit cpu/i386/reset16.inc 
-  ldscript /cpu/i386/reset16.lds 
+	mainboardinit cpu/i386/reset16.inc 
+	ldscript /cpu/i386/reset16.lds 
 else
-#  print "NO FALLBACK USED!"
-end
-
-if USE_NORMAL_IMAGE
-  mainboardinit cpu/i386/reset32.inc 
-  ldscript /cpu/i386/reset32.lds 
+	mainboardinit cpu/i386/reset32.inc 
+	ldscript /cpu/i386/reset32.lds 
 end
 #
 #### Should this be in the northbridge code?
@@ -87,7 +80,6 @@ mainboardinit cpu/k8/earlymtrr.inc
 #
 if USE_FALLBACK_IMAGE
   mainboardinit ./failover.inc
-#  mainboardinit southbridge/amd/amd8111/cmos_boot_failover.inc 
 end
 
 #
@@ -108,10 +100,6 @@ mainboardinit arch/i386/lib/console.inc
 ###
 ##option MAXIMUM_CONSOLE_LOGLEVEL=7
 #default MAXIMUM_CONSOLE_LOGLEVEL=7
-#option DISABLE_WATCHDOG= (MAXIMUM_CONSOLE_LOGLEVEL >= 8) 
-#if DISABLE_WATCHDOG
-#  mainboardinit southbridgeamd/amd8111/disable_watchdog.inc 
-#end
 #
 #if USE_FALLBACK_IMAGE mainboardinit arch/i386/lib/noop_failover.inc  end
 #
@@ -145,13 +133,6 @@ mainboardinit ./auto.inc
 mainboardinit cpu/k8/disable_mmx_sse.inc
 #
 ###
-### Setup RAM
-###
-#mainboardinit ram/ramtest.inc
-#mainboardinit southbridge/amd/amd8111/smbus.inc
-#mainboardinit sdram/generic_dump_spd.inc
-#
-###
 ### Include the secondary Configuration files 
 ###
 northbridge amd/amdk8
@@ -178,5 +159,3 @@ end
 cpu k8 "cpu1"
 end
 
-option ENABLE_IOMMU=0
-
diff --git a/src/mainboard/tyan/s2885/mainboard.c b/src/mainboard/tyan/s2885/mainboard.c
index af8c1ad479..524cb80ab2 100644
--- a/src/mainboard/tyan/s2885/mainboard.c
+++ b/src/mainboard/tyan/s2885/mainboard.c
@@ -7,7 +7,7 @@
 #include "chip.h"
 //#include <part/mainboard.h>
 //#include "lsi_scsi.c"
-unsigned long initial_apicid[MAX_CPUS] =
+unsigned long initial_apicid[CONFIG_MAX_CPUS] =
 {
 	0,1
 };
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index baf3781bf5..5eb127c402 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -157,7 +157,7 @@ static void enable_routing(u8 node)
 	print_debug(" done.\r\n");
 }
 
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
 
 static void rename_temp_node(u8 node)
 {
@@ -290,7 +290,7 @@ static void setup_remote_node(u8 node, u8 cpus)
 
 #endif
 
-#if MAX_CPUS > 2
+#if CONFIG_MAX_CPUS > 2
 static void setup_temp_node(u8 node, u8 cpus)
 {
 	u8 row;
@@ -306,7 +306,7 @@ static u8 setup_uniprocessor(void)
 	return 1;
 }
 
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
 static u8 setup_smp(void)
 {
 	u8 cpus=2;
@@ -332,7 +332,7 @@ static u8 setup_smp(void)
   	
 	clear_temp_row(0);	/* delete temporary connection */
 	
-#if MAX_CPUS > 2
+#if CONFIG_MAX_CPUS > 2
 	cpus=4;
 	
 	/* Setup and check temporary connection from Node 0 to Node 2 */
@@ -386,7 +386,7 @@ static u8 setup_smp(void)
 }
 #endif
 
-#if MAX_CPUS > 1
+#if CONFIG_MAX_CPUS > 1
 static unsigned detect_mp_capabilities(unsigned cpus)
 {
 	unsigned node, row, mask;
@@ -479,7 +479,7 @@ static int setup_coherent_ht_domain(void)
 
 	enable_bsp_routing();
 
-#if MAX_CPUS == 1
+#if CONFIG_MAX_CPUS == 1
 	cpus=setup_uniprocessor();
 #else
 	cpus=setup_smp();
diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c
index 99318aa3f7..802e4318b4 100644
--- a/src/northbridge/amd/amdk8/raminit.c
+++ b/src/northbridge/amd/amdk8/raminit.c
@@ -1,6 +1,8 @@
 #include <cpu/k8/mtrr.h>
 #include "raminit.h"
 
+#define ENABLE_IOMMU 1
+
 /* Function 2 */
 #define DRAM_CSBASE	   0x40
 #define DRAM_CSMASK	   0x60
diff --git a/targets/arima/hdama/Config.lb b/targets/arima/hdama/Config.lb
index 542802b8a7..f9941f5ceb 100644
--- a/targets/arima/hdama/Config.lb
+++ b/targets/arima/hdama/Config.lb
@@ -6,31 +6,29 @@ loadoptions
 
 target hdama
 
-uses AMD8111_DEV
 uses ARCH
 uses CONFIG_COMPRESS
 uses CONFIG_IOAPIC
 uses CONFIG_ROM_STREAM
 uses CONFIG_ROM_STREAM_START
-uses CONFIG_SMP
 uses CONFIG_UDELAY_TSC
 uses CPU_FIXUP
-uses ENABLE_FIXED_AND_VARIABLE_MTRRS
 uses FALLBACK_SIZE
-uses FINAL_MAINBOARD_FIXUP
 uses HAVE_FALLBACK_BOOT
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
+uses HAVE_HARD_RESET
 uses i586
 uses i686
 uses INTEL_PPRO_MTRR
-uses IRQ_SLOT_COUNT
 uses HEAP_SIZE
+uses IRQ_SLOT_COUNT
 uses k7
 uses k8
 uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
-uses MAX_CPUS
+uses CONFIG_SMP
+uses CONFIG_MAX_CPUS
 uses MEMORY_HOLE
 uses PAYLOAD_SIZE
 uses _RAMBASE
@@ -39,12 +37,8 @@ uses ROM_IMAGE_SIZE
 uses ROM_SECTION_OFFSET
 uses ROM_SECTION_SIZE
 uses ROM_SIZE
-uses SIO_BASE
-uses SIO_SYSTEM_CLK_INPUT
 uses STACK_SIZE
-uses USE_ELF_BOOT
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
 uses USE_OPTION_TABLE
 uses HAVE_OPTION_TABLE
 uses MAXIMUM_CONSOLE_LOGLEVEL
@@ -52,15 +46,16 @@ uses  DEFAULT_CONSOLE_LOGLEVEL
 uses  CONFIG_CONSOLE_SERIAL8250
 uses MAINBOARD
 uses CONFIG_CHIP_CONFIGURE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses LINUXBIOS_EXTRA_VERSION
 
 option CONFIG_CHIP_CONFIGURE=1
 
-option  MAXIMUM_CONSOLE_LOGLEVEL=7
-option  DEFAULT_CONSOLE_LOGLEVEL=7
+option  MAXIMUM_CONSOLE_LOGLEVEL=8
+option  DEFAULT_CONSOLE_LOGLEVEL=8
 option  CONFIG_CONSOLE_SERIAL8250=1
 
-option HAVE_OPTION_TABLE=1
-option HAVE_MP_TABLE=1
 option CPU_FIXUP=1
 option CONFIG_UDELAY_TSC=0
 option i686=1
@@ -68,95 +63,22 @@ option i586=1
 option INTEL_PPRO_MTRR=1
 option k7=1
 option k8=1
-option ROM_SIZE=0x100000
 
-### Customize our winbond superio chip for this motherboard
-###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
-#
-###
-### Build code to export a programmable irq routing table
-###
-option HAVE_PIRQ_TABLE=1
-option IRQ_SLOT_COUNT=18
-#
-###
-### Build code for SMP support
-### Only worry about 2 micro processors
-###
-option CONFIG_SMP=1
-option MAX_CPUS=2
-#
-###
-### Build code to setup a generic IOAPIC
-###
-option CONFIG_IOAPIC=1
-#
-###
-### MEMORY_HOLE instructs earlymtrr.inc to
-### enable caching from 0-640KB and to disable 
-### caching from 640KB-1MB using fixed MTRRs 
-###
-### Enabling this option breaks SMP because secondary
-### CPU identification depends on only variable MTRRs
-### being enabled.
-###
-option MEMORY_HOLE=0
-#
-###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
+option ROM_SIZE=524288
 
-###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
+
+option HAVE_OPTION_TABLE=1
+option CONFIG_ROM_STREAM=1
+option HAVE_FALLBACK_BOOT=1
 
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
-option FALLBACK_SIZE=0x100000
-###
-### Compute where this copy of linuxBIOS will start in the boot rom
-###
-#
-###
-### Compute a range of ROM that can cached to speed up linuxBIOS,
-### execution speed.
-###
-##expr XIP_ROM_SIZE = 65536
-##expr XIP_ROM_BASE = _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE
-##option XIP_ROM_SIZE=65536
-##option XIP_ROM_BASE=0xffff0000
-#
-## XIP_ROM_SIZE && XIP_ROM_BASE values that work.
-##option XIP_ROM_SIZE=0x8000
-##option XIP_ROM_BASE=0xffff8000
-
-## We don't use compressed image
-option CONFIG_COMPRESS=1
-
-option USE_ELF_BOOT=1
+option FALLBACK_SIZE=131072
 
 ## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x4000
-
-##
-## Use a 64K stack
-##
-option STACK_SIZE=0x10000
-
-##
-## Use a 64K heap
-##
-option HEAP_SIZE=0x10000
+option _RAMBASE=0x00004000
 
 #
 ###
@@ -166,32 +88,20 @@ option HEAP_SIZE=0x10000
 
 #
 # Arima hdama
-#romimage "normal"
-#	option USE_FALLBACK_IMAGE=0
-#	option ROM_SECTION_SIZE  = (ROM_SIZE - FALLBACK_SIZE)
-#	option ROM_SECTION_OFFSET= 0
-#	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-#	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-#	option CONFIG_ROM_STREAM     = 1
-#	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
-#	mainboard arima/hdama
-#	payload ../eepro100.ebi 
-#end
+romimage "normal"
+	option USE_FALLBACK_IMAGE=0
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Normal"
+	mainboard arima/hdama
+	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
+end
 
 romimage "fallback" 
-	option ROM_IMAGE_SIZE=0x10000
-#	option ROM_IMAGE_SIZE=120*1024
 	option USE_FALLBACK_IMAGE=1
-	option HAVE_FALLBACK_BOOT=1
-	option ROM_SECTION_SIZE  = FALLBACK_SIZE
-	option ROM_SECTION_OFFSET= (ROM_SIZE - FALLBACK_SIZE)
-	option PAYLOAD_SIZE            = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
-	option CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-	option CONFIG_ROM_STREAM     = 1
-	option _ROMBASE      = (CONFIG_ROM_STREAM_START + PAYLOAD_SIZE)
+	option ROM_IMAGE_SIZE=0x10000
+	option LINUXBIOS_EXTRA_VERSION=".0Fallback"
 	mainboard arima/hdama
-	payload ../../../../tg3--ide_disk.zelf
-#	payload ../../../../opteron_phase1_p4_noapic
+	payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
 end
 
 buildrom ROM_SIZE "normal" "fallback"
diff --git a/targets/embeddedplanet/ep405pc/Config.lb b/targets/embeddedplanet/ep405pc/Config.lb
index 5ee911b92b..404edebe02 100644
--- a/targets/embeddedplanet/ep405pc/Config.lb
+++ b/targets/embeddedplanet/ep405pc/Config.lb
@@ -15,7 +15,6 @@ uses NO_POST
 uses CONFIG_IDE_STREAM 
 uses CONFIG_SYS_CLK_FREQ
 uses IDE_BOOT_DRIVE
-uses USE_ELF_BOOT 
 uses IDE_SWAB IDE_OFFSET 
 uses ROM_SIZE ROM_IMAGE_SIZE 
 uses ROM_SECTION_SIZE 
@@ -48,7 +47,6 @@ option NO_POST=1
 ## Boot linux from IDE
 option CONFIG_IDE_STREAM=1
 option IDE_BOOT_DRIVE=0
-option USE_ELF_BOOT=1
 option IDE_SWAB=1
 option IDE_OFFSET=0
 
diff --git a/targets/motorola/sandpoint/Config.lb b/targets/motorola/sandpoint/Config.lb
index d7dff1b2ae..e10b6249a7 100644
--- a/targets/motorola/sandpoint/Config.lb
+++ b/targets/motorola/sandpoint/Config.lb
@@ -16,7 +16,6 @@ uses NO_POST
 uses CONFIG_CONSOLE_SERIAL8250 
 uses CONFIG_IDE_STREAM 
 uses IDE_BOOT_DRIVE
-uses USE_ELF_BOOT 
 uses IDE_SWAB IDE_OFFSET 
 uses ROM_SIZE ROM_IMAGE_SIZE 
 uses ROM_SECTION_SIZE 
@@ -51,7 +50,6 @@ option CONFIG_CONSOLE_SERIAL8250=1
 ## Boot linux from IDE
 option CONFIG_IDE_STREAM=1
 option IDE_BOOT_DRIVE=0
-option USE_ELF_BOOT=1
 option IDE_SWAB=1
 option IDE_OFFSET=0
 
diff --git a/targets/tyan/s2880/Config.lb b/targets/tyan/s2880/Config.lb
index 42294f396d..0643751e98 100644
--- a/targets/tyan/s2880/Config.lb
+++ b/targets/tyan/s2880/Config.lb
@@ -6,7 +6,6 @@ loadoptions
 
 target s2880
 
-uses AMD8111_DEV
 uses ARCH
 uses CONFIG_COMPRESS
 uses CONFIG_IOAPIC
@@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START
 uses CONFIG_SMP
 uses CONFIG_UDELAY_TSC
 uses CPU_FIXUP
-uses ENABLE_FIXED_AND_VARIABLE_MTRRS
 uses FALLBACK_SIZE
-uses FINAL_MAINBOARD_FIXUP
 uses HAVE_FALLBACK_BOOT
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
@@ -31,7 +28,6 @@ uses k8
 uses MAINBOARD
 uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
-uses MAX_CPUS
 #uses MEMORY_HOLE
 uses PAYLOAD_SIZE
 uses _RAMBASE
@@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE
 uses ROM_SECTION_OFFSET
 uses ROM_SECTION_SIZE
 uses ROM_SIZE
-uses SIO_BASE
-uses SIO_SYSTEM_CLK_INPUT
 uses STACK_SIZE
-uses USE_ELF_BOOT
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
 uses USE_OPTION_TABLE
 uses HAVE_OPTION_TABLE
 uses CONFIG_CHIP_CONFIGURE
@@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL
 uses DEBUG
 uses CONFIG_MAX_CPUS
 uses CONFIG_LOGICAL_CPUS
-uses MAX_PHYSICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
 uses LINUXBIOS_EXTRA_VERSION
 uses XIP_ROM_SIZE
 uses XIP_ROM_BASE
@@ -97,10 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
-### Customize our winbond superio chip for this motherboard
-###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
 #
 ###
 ### Build code to export a programmable irq routing table
@@ -114,9 +102,8 @@ option IRQ_SLOT_COUNT=13
 ###
 option CONFIG_SMP=1
 option CONFIG_MAX_CPUS=2
-option MAX_CPUS=2
 option CONFIG_LOGICAL_CPUS=0
-option MAX_PHYSICAL_CPUS=2
+option CONFIG_MAX_PHYSICAL_CPUS=2
 #
 ###
 ### Build code to setup a generic IOAPIC
@@ -135,26 +122,12 @@ option CONFIG_IOAPIC=1
 #option MEMORY_HOLE=0
 #
 ###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
 ### Clean up the motherboard id strings
 ###
 option MAINBOARD_PART_NUMBER="S2880"
 option MAINBOARD_VENDOR="Tyan"
 #
 ###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-
-###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
@@ -174,9 +147,6 @@ option ROM_IMAGE_SIZE=65536
 ## We do use compressed image
 option CONFIG_COMPRESS=1
 
-option USE_ELF_BOOT=1
-
-
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
 
@@ -200,8 +170,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9
 
 option DEBUG=1
 
-option AMD8111_DEV=0x5
-
 #
 
 ## LinuxBIOS C code runs at this location in RAM
diff --git a/targets/tyan/s2882/Config.lb b/targets/tyan/s2882/Config.lb
index 5842babc5c..3589656794 100644
--- a/targets/tyan/s2882/Config.lb
+++ b/targets/tyan/s2882/Config.lb
@@ -6,7 +6,6 @@ loadoptions
 
 target s2882
 
-uses AMD8111_DEV
 uses ARCH
 uses CONFIG_COMPRESS
 uses CONFIG_IOAPIC
@@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START
 uses CONFIG_SMP
 uses CONFIG_UDELAY_TSC
 uses CPU_FIXUP
-uses ENABLE_FIXED_AND_VARIABLE_MTRRS
 uses FALLBACK_SIZE
-uses FINAL_MAINBOARD_FIXUP
 uses HAVE_FALLBACK_BOOT
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
@@ -31,7 +28,6 @@ uses k8
 uses MAINBOARD
 uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
-uses MAX_CPUS
 #uses MEMORY_HOLE
 uses PAYLOAD_SIZE
 uses _RAMBASE
@@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE
 uses ROM_SECTION_OFFSET
 uses ROM_SECTION_SIZE
 uses ROM_SIZE
-uses SIO_BASE
-uses SIO_SYSTEM_CLK_INPUT
 uses STACK_SIZE
-uses USE_ELF_BOOT
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
 uses USE_OPTION_TABLE
 uses HAVE_OPTION_TABLE
 uses CONFIG_CHIP_CONFIGURE
@@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL
 uses DEBUG
 uses CONFIG_MAX_CPUS
 uses CONFIG_LOGICAL_CPUS
-uses MAX_PHYSICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
 uses LINUXBIOS_EXTRA_VERSION
 uses XIP_ROM_SIZE
 uses XIP_ROM_BASE
@@ -97,10 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
-### Customize our winbond superio chip for this motherboard
-###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
 #
 ###
 ### Build code to export a programmable irq routing table
@@ -114,9 +102,8 @@ option IRQ_SLOT_COUNT=15
 ###
 option CONFIG_SMP=1
 option CONFIG_MAX_CPUS=2
-option MAX_CPUS=2
 option CONFIG_LOGICAL_CPUS=0
-option MAX_PHYSICAL_CPUS=2
+option CONFIG_MAX_PHYSICAL_CPUS=2
 #
 ###
 ### Build code to setup a generic IOAPIC
@@ -135,25 +122,10 @@ option CONFIG_IOAPIC=1
 #option MEMORY_HOLE=0
 #
 ###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
 ### Clean up the motherboard id strings
 ###
 option MAINBOARD_PART_NUMBER="S2882"
 option MAINBOARD_VENDOR="Tyan"
-#
-###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-
 ###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
@@ -174,9 +146,6 @@ option ROM_IMAGE_SIZE=65536
 ## We do use compressed image
 option CONFIG_COMPRESS=1
 
-option USE_ELF_BOOT=1
-
-
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
 
@@ -200,8 +169,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9
 
 option DEBUG=1
 
-option AMD8111_DEV=0x5
-
 #
 
 ## LinuxBIOS C code runs at this location in RAM
diff --git a/targets/tyan/s2885/Config.lb b/targets/tyan/s2885/Config.lb
index 9f0e179874..fb99316da1 100644
--- a/targets/tyan/s2885/Config.lb
+++ b/targets/tyan/s2885/Config.lb
@@ -6,7 +6,6 @@ loadoptions
 
 target s2885
 
-uses AMD8111_DEV
 uses ARCH
 uses CONFIG_COMPRESS
 uses CONFIG_IOAPIC
@@ -15,9 +14,7 @@ uses CONFIG_ROM_STREAM_START
 uses CONFIG_SMP
 uses CONFIG_UDELAY_TSC
 uses CPU_FIXUP
-uses ENABLE_FIXED_AND_VARIABLE_MTRRS
 uses FALLBACK_SIZE
-uses FINAL_MAINBOARD_FIXUP
 uses HAVE_FALLBACK_BOOT
 uses HAVE_MP_TABLE
 uses HAVE_PIRQ_TABLE
@@ -31,7 +28,6 @@ uses k8
 uses MAINBOARD
 uses MAINBOARD_PART_NUMBER
 uses MAINBOARD_VENDOR
-uses MAX_CPUS
 #uses MEMORY_HOLE
 uses PAYLOAD_SIZE
 uses _RAMBASE
@@ -40,12 +36,8 @@ uses ROM_IMAGE_SIZE
 uses ROM_SECTION_OFFSET
 uses ROM_SECTION_SIZE
 uses ROM_SIZE
-uses SIO_BASE
-uses SIO_SYSTEM_CLK_INPUT
 uses STACK_SIZE
-uses USE_ELF_BOOT
 uses USE_FALLBACK_IMAGE
-uses USE_NORMAL_IMAGE
 uses USE_OPTION_TABLE
 uses HAVE_OPTION_TABLE
 uses CONFIG_CHIP_CONFIGURE
@@ -57,7 +49,7 @@ uses MAXIMUM_CONSOLE_LOGLEVEL
 uses DEBUG
 uses CONFIG_MAX_CPUS
 uses CONFIG_LOGICAL_CPUS
-uses MAX_PHYSICAL_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
 uses LINUXBIOS_EXTRA_VERSION
 uses XIP_ROM_SIZE
 uses XIP_ROM_BASE
@@ -97,11 +89,6 @@ option CONFIG_CHIP_CONFIGURE=1
 #option CONFIG_LSI_SCSI_FW_FIXUP=1
 
 
-### Customize our winbond superio chip for this motherboard
-###
-option SIO_BASE=0x2e
-option SIO_SYSTEM_CLK_INPUT=0
-#
 ###
 ### Build code to export a programmable irq routing table
 ###
@@ -114,9 +101,8 @@ option IRQ_SLOT_COUNT=11
 ###
 option CONFIG_SMP=1
 option CONFIG_MAX_CPUS=2
-option MAX_CPUS=2
 option CONFIG_LOGICAL_CPUS=0
-option MAX_PHYSICAL_CPUS=2
+option CONFIG_MAX_PHYSICAL_CPUS=2
 #
 ###
 ### Build code to setup a generic IOAPIC
@@ -135,26 +121,12 @@ option CONFIG_IOAPIC=1
 #option MEMORY_HOLE=0
 #
 ###
-### Enable both fixed and variable MTRRS
-### When we setup MTRRs in mtrr.c  
-###
-### We must setup the fixed mtrrs or we confuse SMP secondary
-### processor identification
-###
-option ENABLE_FIXED_AND_VARIABLE_MTRRS=1
-#
-###
 ### Clean up the motherboard id strings
 ###
 option MAINBOARD_PART_NUMBER="S2885"
 option MAINBOARD_VENDOR="Tyan"
 #
 ###
-### Call the final_mainboard_fixup function
-###
-option FINAL_MAINBOARD_FIXUP=1
-
-###
 ### Compute the location and size of where this firmware image
 ### (linuxBIOS plus bootloader) will live in the boot rom chip.
 ###
@@ -174,9 +146,6 @@ option ROM_IMAGE_SIZE=65536
 ## We do use compressed image
 option CONFIG_COMPRESS=1
 
-option USE_ELF_BOOT=1
-
-
 option CONFIG_CONSOLE_SERIAL8250=1
 option TTYS0_BAUD=115200
 
@@ -200,8 +169,6 @@ option MAXIMUM_CONSOLE_LOGLEVEL=9
 
 option DEBUG=1
 
-option AMD8111_DEV=0x5
-
 #
 
 ## LinuxBIOS C code runs at this location in RAM
diff --git a/util/newconfig/config.g b/util/newconfig/config.g
index ee9d867b46..a7e0385a10 100644
--- a/util/newconfig/config.g
+++ b/util/newconfig/config.g
@@ -4,6 +4,8 @@ import re
 import string
 import types
 
+import traceback
+
 warnings = 0
 errors = 0
 
@@ -54,10 +56,7 @@ class stack:
 		return len(self.stack)
 
 	def __getitem__ (self, i):
-		try:
-			return self.stack[i]
-		except IndexError:
-			return 0
+		return self.stack[i]
 
 	def __iter__ (self):
 		return self.__stack_iter(self.stack)
@@ -618,6 +617,9 @@ class partobj:
 		# definitions for this part (only want to do it once)
 		self.done_types = 0
 
+		# Path to the device
+		self.path = ""
+		
 		# If no instance name is supplied then generate
 		# a unique name
 		if (instance_name == 0):
@@ -637,8 +639,12 @@ class partobj:
 			# me as the child.
 			if (parent.children):
 				debug.info(debug.gencode, "add %s (%d) as sibling" % (parent.children.dir, parent.children.instance))
-				self.siblings = parent.children
-			parent.children = self
+				youngest = parent.children;
+				while(youngest.siblings):
+					youngest = youngest.siblings
+				youngest.siblings = self
+			else:
+				parent.children = self
 		else:
 			self.parent = self
 
@@ -656,10 +662,10 @@ class partobj:
 			print "%d: siblings %s" % (lvl, self.siblings.dir)
 		print "%d: initcode " % lvl
 		for i in self.initcode:
-			print "  %s" % i
+			print "\t%s" % i
 		print "%d: registercode " % lvl
 		for f, v in self.registercode.items():
-			print "  %s = %s" % (f, v)
+			print "\t%s = %s" % (f, v)
 		print "\n"
 
 	def gencode(self, file, pass_num):
@@ -681,7 +687,7 @@ class partobj:
 			if (self.registercode):
 				file.write("\t= {\n")
 				for f, v in self.registercode.items():
-					file.write( "  .%s = %s,\n" % (f, v))
+					file.write( "\t.%s = %s,\n" % (f, v))
 				file.write("};\n")
 			else:
 				file.write(";")
@@ -690,33 +696,35 @@ class partobj:
 			file.write("struct chip %s = {\n" % self.instance_name)
 		else:
 			file.write("struct chip static_root = {\n")
-		file.write("/* %s %s */\n" % (self.part, self.dir))
+		file.write("\t/* %s %s */\n" % (self.part, self.dir))
+		if (self.path != ""):
+			file.write("\t.path = { %s\n\t},\n" % (self.path) );
 		if (self.siblings):
 			debug.info(debug.gencode, "gencode: siblings(%d)" \
 				% self.siblings.instance)
-			file.write("  .next = &%s,\n" \
+			file.write("\t.next = &%s,\n" \
 				% self.siblings.instance_name)
 		else:
-			file.write("  .next = 0,\n")
+			file.write("\t.next = 0,\n")
 		if (self.children):
 			debug.info(debug.gencode, "gencode: children(%d)" \
 				% self.children.instance)
-			file.write("  .children = &%s,\n" \
+			file.write("\t.children = &%s,\n" \
 				% self.children.instance_name)
 		else:
-			file.write("  .children = 0,\n")
+			file.write("\t.children = 0,\n")
 		if (self.chipconfig):
 			# set the pointer to the structure for all this
 			# type of part
-			file.write("  .control= &%s_control,\n" % \
+			file.write("\t.control= &%s_control,\n" % \
 					self.type_name )
 			# generate the pointer to the isntance
 			# of the chip struct
-			file.write("  .chip_info = (void *) &%s,\n" \
+			file.write("\t.chip_info = (void *) &%s,\n" \
 					% self.config_name)
 		else:
-			file.write("  .control= 0,\n")
-			file.write("  .chip_info= 0,\n")
+			file.write("\t.control= 0,\n")
+			file.write("\t.chip_info= 0,\n")
 		file.write("};\n")
 		
     	def addinit(self, code):
@@ -734,6 +742,34 @@ class partobj:
 		value = dequote(value)
         	setdict(self.registercode, field, value)
 
+	def addpcipath(self, enable, channel, slot, function):
+		""" Add a relative pci style path from our parent to this device """
+		if (channel < 0):
+			fatal("Invalid channel")
+		if ((slot < 0) or (slot > 0x1f)):
+			fatal("Invalid device id")
+		if ((function < 0) or (function > 7)):
+			fatal("Invalid function")
+		self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path = {.type=DEVICE_PATH_PCI,.u={.pci={ .devfn = PCI_DEVFN(0x%x,%d) }}}}," % (self.path, channel, enable, slot, function)
+
+	def addpnppath(self, enable, channel, port, device):
+		""" Add a relative path to a pnp device hanging off our parent """
+		if (channel < 0):
+			fatal("Invalid channel")
+		if ((port < 0) or (port > 65536)):
+			fatal("Invalid port")
+		if ((device < 0) or (device > 0xff)):
+			fatal("Invalid device")
+		self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path={.type=DEVICE_PATH_PNP,.u={.pnp={ .port = 0x%x, .device = 0x%x }}}}," % (self.path, channel, enable, port, device)
+
+	def addi2cpath(self, enable, channel, device):
+		""" Add a relative path to a i2c device hanging off our parent """
+		if (channel < 0):
+			fatal("Invalid channel")
+		if ((device < 0) or (device > 0x7f)):
+			fatal("Invalid device")
+		self.path = "%s\n\t\t{ .channel = %d, .enable = %d, .path = {.type=DEVICE_PATH_I2C,.u={.i2c={ .device = 0x%x }}}}, " % (self.path, channel, enable, device)
+
 	def usesoption(self, name):
 		"""Declare option that can be used by this part"""
 		global global_options
@@ -1070,10 +1106,9 @@ def cpudir(path):
 	global cpu_type
 	if (cpu_type and (cpu_type != path)):
 		fatal("Two different CPU types: %s and %s" % (cpu_type, path))
-	if (not cpu_type):
-		srcdir = "/cpu/%s" % path
-		dodir(srcdir, "Config.lb")
-		cpu_type = path
+	srcdir = "/cpu/%s" % path
+	dodir(srcdir, "Config.lb")
+	cpu_type = path
 	
 def part(type, path, file, name):
 	global curimage, dirstack, partstack
@@ -1183,7 +1218,7 @@ def tohex(name):
 def IsInt( str ):
 	""" Is the given string an integer?"""
 	try:
-		num = int(str)
+		num = long(str)
 		return 1
 	except ValueError:
 		return 0
@@ -1265,8 +1300,9 @@ parser Config:
     token TARGET:		'target'
     token USED:			'used'
     token USES:			'uses'
-    token NUM:			r'[0-9]+'
-    token XNUM:			r'0x[0-9a-fA-F]+'
+    token NUM:			'[0-9]+'
+    token HEX_NUM:		'[0-9a-fA-F]+'
+    token HEX_PREFIX:		'0x'
     # Why is path separate? Because paths to resources have to at least
     # have a slash, we thinks
     token PATH:			r'[a-zA-Z0-9_.][a-zA-Z0-9/_.]+[a-zA-Z0-9_.]+'
@@ -1277,6 +1313,12 @@ parser Config:
     token DELEXPR:		r'{([^}]+|\\.)*}'
     token STR:			r'"([^\\"]+|\\.)*"'
     token RAWTEXT:		r'.*'
+    token ON:			'on'
+    token OFF:			'off'
+    token PCI:			'pci'
+    token PNP:			'pnp'
+    token I2C:			'i2c'
+
 
     rule expr:		logical			{{ l = logical }}
 			( "&&" logical		{{ l = l and logical }}
@@ -1296,8 +1338,8 @@ parser Config:
 			)*			{{ return v }}
 
     # A term is a number, variable, or an expression surrounded by parentheses
-    rule term:		NUM			{{ return atoi(NUM) }}
-		|	XNUM			{{ return tohex(XNUM) }}
+    rule term:		NUM			{{ return long(NUM, 10) }}
+		|	HEX_PREFIX HEX_NUM	{{ return long(HEX_NUM, 16) }}
 		|	ID			{{ return lookup(ID) }}
 		|	unop			{{ return unop }}
 		|	"\\(" expr "\\)"	{{ return expr }}
@@ -1373,6 +1415,28 @@ parser Config:
 
     rule register<<C>>:	REGISTER field '=' STR	{{ if (C): addregister(field, STR) }}
 
+    rule enable:				{{ val = 1 }}
+	    		[ ( ON 			{{ val = 1 }}
+			| OFF			{{ val = 0 }}
+			) ]			{{ return val }}
+    
+    rule pci<<C>>:	PCI HEX_NUM		{{ channel = int(HEX_NUM,16) }}
+    			':' HEX_NUM		{{ slot = int(HEX_NUM,16) }}
+			'.' HEX_NUM		{{ function = int(HEX_NUM, 16) }}
+			enable 
+						{{ if (C): partstack.tos().addpcipath(enable, channel, slot, function) }}
+
+    rule pnp<<C>>:	PNP HEX_NUM		{{ channel = int(HEX_NUM,16) }}
+    			':' HEX_NUM		{{ port = int(HEX_NUM,16) }}
+			'.' HEX_NUM		{{ device = int(HEX_NUM, 16) }}
+			enable
+						{{ if (C): partstack.tos().addpnppath(enable, channel, port, device) }}
+
+    rule i2c<<C>>:	I2C HEX_NUM		{{ channel = int(HEX_NUM, 16) }}
+    			':' HEX_NUM		{{ device = int(HEX_NUM, 16) }}
+			enable
+						{{ if (C): partstatck.tos().addi2cpath(enable, channel, device) }}
+			
     rule prtval:	expr			{{ return str(expr) }}
 		|	STR			{{ return STR }}
 
@@ -1402,8 +1466,10 @@ parser Config:
 		|	object<<C>>		{{ return object }}
 		|	option<<C>>		{{ return option }}
 		|	partdef<<C>>		{{ return partdef }}
-		| 	prtstmt<<C>>		{{ return prtstmt}}
-		|	register<<C>> 		{{ return register}}
+		| 	prtstmt<<C>>		{{ return prtstmt }}
+		|	register<<C>> 		{{ return register }}
+		|	pci<<C>>		{{ return pci }}
+		|	pnp<<C>>		{{ return pnp }}
 
     # ENTRY for parsing Config.lb file
     rule cfgfile:	(uses<<1>>)* 
@@ -1560,7 +1626,7 @@ def writeimagemakefile(image):
 	# Instead, let make do the work of computing CPUFLAGS:
 	file.write("# Get the value of TOP, VARIABLES, and several other variables.\n")
 	file.write("include Makefile.settings\n\n")
-	file.write("# Function to create an item like -Di586 or -DMAX_CPUS='1' or -Ui686\n")
+	file.write("# Function to create an item like -Di586 or -DCONFIG_MAX_CPUS='1' or -Ui686\n")
 	file.write("D_item = $(if $(subst undefined,,$(origin $1)),-D$1$(if $($1),='$($1)',),-U$1)\n\n")
 	file.write("# Compute the value of CPUFLAGS here during make's first pass.\n")
 	file.write("CPUFLAGS := $(foreach _var_,$(VARIABLES),$(call D_item,$(_var_)))\n\n")
@@ -1688,7 +1754,8 @@ def writeimagemakefile(image):
 	#file.write("\tpython $(TOP)/util/config/NLBConfig.py %s $(TOP)\n"
 	#		% top_config_file)
 
-	keys = image.getroot().uses_options.keys()
+	#keys = image.getroot().uses_options.keys()
+	keys = global_options_by_order
 	keys.sort()
 	file.write("\necho:\n")
 	for key in keys:
@@ -1791,6 +1858,7 @@ def writecode(image):
 	print "Creating", filename
 	file = safe_open(filename, 'w+')
 	file.write("#include <device/chip.h>\n")
+	file.write("#include <device/pci.h>\n")
 	for path in image.getconfigincludes().values():
 		file.write("#include \"%s\"\n" % path)
 	gencode(image.getroot(), file, 0)