Add support for the VIA EPIA-CN baord, which uses C7 + CN700 + VT8237R.

This also contains various improvements of the CN700 code in svn.

Signed-off-by: Aaron Lwe <aaron.lwe@gmail.com>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3334 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

10 files changed, 931 insertions, 199 deletions

diff --git a/src/mainboard/via/epia-cn/Config.lb b/src/mainboard/via/epia-cn/Config.lb
new file mode 100644
index 0000000000..52eb18492f
--- /dev/null
+++ b/src/mainboard/via/epia-cn/Config.lb
@@ -0,0 +1,142 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 VIA Technologies, Inc.
+## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+if USE_FALLBACK_IMAGE
+	default ROM_SECTION_SIZE   = FALLBACK_SIZE
+	default ROM_SECTION_OFFSET = (ROM_SIZE - FALLBACK_SIZE)
+else
+	default ROM_SECTION_SIZE   = (ROM_SIZE - FALLBACK_SIZE)
+	default ROM_SECTION_OFFSET = 0
+end
+default PAYLOAD_SIZE = (ROM_SECTION_SIZE - ROM_IMAGE_SIZE)
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+default XIP_ROM_SIZE = 64 * 1024
+default XIP_ROM_BASE = (_ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE)
+arch i386 end
+driver mainboard.o
+if HAVE_PIRQ_TABLE object irq_tables.o end
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_ACPI_TABLES
+	object fadt.o
+	object dsdt.o
+	object acpi_tables.o
+end
+makerule ./failover.E
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./failover.inc
+	depends "$(MAINBOARD)/../../../arch/i386/lib/failover.c ./romcc"
+	action "./romcc    -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/../../../arch/i386/lib/failover.c -o $@"
+end
+makerule ./auto.E
+	depends	"$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc -E -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+makerule ./auto.inc
+	depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
+	action	"./romcc    -mcpu=c3 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
+end
+mainboardinit cpu/x86/16bit/entry16.inc
+mainboardinit cpu/x86/32bit/entry32.inc
+ldscript /cpu/x86/16bit/entry16.lds
+ldscript /cpu/x86/32bit/entry32.lds
+if USE_FALLBACK_IMAGE
+	mainboardinit cpu/x86/16bit/reset16.inc
+	ldscript /cpu/x86/16bit/reset16.lds
+else
+	mainboardinit cpu/x86/32bit/reset32.inc
+	ldscript /cpu/x86/32bit/reset32.lds
+end
+mainboardinit arch/i386/lib/cpu_reset.inc
+mainboardinit arch/i386/lib/id.inc
+ldscript /arch/i386/lib/id.lds
+if USE_FALLBACK_IMAGE
+	ldscript /arch/i386/lib/failover.lds
+	mainboardinit ./failover.inc
+end
+mainboardinit cpu/x86/fpu/enable_fpu.inc
+mainboardinit cpu/x86/mmx/enable_mmx.inc
+mainboardinit ./auto.inc
+mainboardinit cpu/x86/mmx/disable_mmx.inc
+dir /pc80
+config chip.h
+
+chip northbridge/via/cn700			# Northbridge
+  device pci_domain 0 on			# PCI domain
+    device pci 0.0 on end			# AGP Bridge
+    device pci 0.1 on end			# Error Reporting
+    device pci 0.2 on end			# Host Bus Control
+    device pci 0.3 on end			# Memory Controller
+    device pci 0.4 on end			# Power Management
+    device pci 0.7 on end			# V-Link Controller
+    device pci 1.0 on end			# PCI Bridge
+    chip southbridge/via/vt8237r		# Southbridge
+      # Enable both IDE channels.
+      register "ide0_enable" = "1"
+      register "ide1_enable" = "1"
+      # Both cables are 40pin.
+      register "ide0_80pin_cable" = "0"
+      register "ide1_80pin_cable" = "0"
+      device pci f.0 on end			# IDE
+      register "fn_ctrl_lo" = "0x8a"
+      register "fn_ctrl_hi" = "0x9d"
+      device pci 10.0 on end			# USB 1.1
+      device pci 10.1 on end			# USB 1.1
+      device pci 10.2 on end			# USB 1.1
+      device pci 10.3 on end			# USB 1.1
+      device pci 11.0 on			# Southbridge LPC
+        chip superio/via/vt1211			# Super I/O
+          device pnp 2e.0 off			# Floppy
+            io 0x60 = 0x3f0
+            irq 0x70 = 6
+            drq 0x74 = 2
+          end
+          device pnp 2e.1 on			# Parallel Port
+            io 0x60 = 0x378
+            irq 0x70 = 7
+            drq 0x74 = 3
+          end
+          device pnp 2e.2 on			# COM1
+            io 0x60 = 0x3f8
+            irq 0x70 = 4
+          end
+          device pnp 2e.3 on			# COM2
+            io 0x60 = 0x2f8
+            irq 0x70 = 3
+          end
+          device pnp 2e.b on			# HWM
+            io 0x60 = 0xec00
+          end
+        end
+      end
+      device pci 11.5 on end			# AC'97 audio
+      # device pci 11.6 off end			# AC'97 Modem
+      device pci 12.0 on end			# Ethernet
+    end
+  end
+  device apic_cluster 0 on			# APIC cluster
+    chip cpu/via/model_c7			# VIA C7
+      device apic 0 on end			# APIC
+    end
+  end
+end
diff --git a/src/mainboard/via/epia-cn/Options.lb b/src/mainboard/via/epia-cn/Options.lb
new file mode 100644
index 0000000000..fee1920a6c
--- /dev/null
+++ b/src/mainboard/via/epia-cn/Options.lb
@@ -0,0 +1,108 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 VIA Technologies, Inc.
+## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses HAVE_OPTION_TABLE
+uses USE_OPTION_TABLE
+uses CONFIG_ROM_PAYLOAD
+uses IRQ_SLOT_COUNT
+uses MAINBOARD
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PART_NUMBER
+uses COREBOOT_EXTRA_VERSION
+uses ARCH
+uses FALLBACK_SIZE
+uses STACK_SIZE
+uses HEAP_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD_START
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses _RAMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses HAVE_MP_TABLE
+uses HAVE_ACPI_TABLES
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses CONFIG_CONSOLE_SERIAL8250
+uses CONFIG_UDELAY_TSC
+uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
+uses CONFIG_PCI_ROM_RUN
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_MAX_PCI_BUSES
+uses TTYS0_BAUD
+uses CONFIG_CHIP_NAME
+uses CONFIG_VIDEO_MB
+uses CONFIG_IOAPIC
+
+default ROM_SIZE = 512 * 1024
+default CONFIG_IOAPIC = 0
+default CONFIG_VIDEO_MB = 32
+default CONFIG_CONSOLE_SERIAL8250 = 1
+default CONFIG_PCI_ROM_RUN = 0
+default CONFIG_CONSOLE_VGA = 0
+default CONFIG_CHIP_NAME = 1
+default HAVE_FALLBACK_BOOT = 1
+default HAVE_MP_TABLE = 0
+default CONFIG_UDELAY_TSC = 1
+default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2 = 1
+default HAVE_HARD_RESET = 0
+default HAVE_PIRQ_TABLE = 1
+default IRQ_SLOT_COUNT = 10
+default HAVE_ACPI_TABLES = 0
+default HAVE_OPTION_TABLE = 1
+default ROM_IMAGE_SIZE = 64 * 1024
+default FALLBACK_SIZE = ROM_SIZE
+default USE_FALLBACK_IMAGE = 1
+default STACK_SIZE = 8 * 1024
+default HEAP_SIZE = 16 * 1024
+#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default USE_OPTION_TABLE = 0
+default _RAMBASE = 0x00004000
+default CONFIG_ROM_PAYLOAD = 1
+default CROSS_COMPILE = ""
+default CC = "$(CROSS_COMPILE)gcc -m32"
+default HOSTCC = "gcc"
+
+##
+## Set this to the max PCI bus number you would ever use for PCI config I/O.
+## Setting this number very high will make pci_locate_device() take a long
+## time when it can't find a device.
+##
+default CONFIG_MAX_PCI_BUSES = 3
+
+end
+
diff --git a/src/mainboard/via/epia-cn/auto.c b/src/mainboard/via/epia-cn/auto.c
new file mode 100644
index 0000000000..592547b18a
--- /dev/null
+++ b/src/mainboard/via/epia-cn/auto.c
@@ -0,0 +1,131 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <device/pci_ids.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <arch/hlt.h>
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include "ram/ramtest.c"
+#include "northbridge/via/cn700/raminit.h"
+#include "cpu/x86/mtrr/earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "pc80/udelay_io.c"
+#include "lib/delay.c"
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
+#include "southbridge/via/vt8235/vt8235_early_serial.c"
+
+static void memreset_setup(void)
+{
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+	return smbus_read_byte(device, address);
+}
+
+#include "northbridge/via/cn700/raminit.c"
+
+static void enable_mainboard_devices(void)
+{
+	device_t dev;
+	u8 reg;
+
+	/*
+	 * If I enable SATA, FILO will not find the IDE disk, so I'll disable
+	 * SATA here. To not conflict with PCI spec, I'll move IDE device
+	 * from 00:0f.1 to 00:0f.0.
+	 */
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+				PCI_DEVICE_ID_VIA_VT6420_SATA), 0);
+	if (dev != PCI_DEV_INVALID) {
+		/* Enable PATA. */
+		reg = pci_read_config8(dev, 0xd1);
+		reg |= 0x08;
+		pci_write_config8(dev, 0xd1, reg);
+		reg = pci_read_config8(dev, 0x49);
+		reg |= 0x80;
+		pci_write_config8(dev, 0x49, reg);
+	} else {
+		print_debug("No SATA device\r\n");
+	}
+
+	/* Disable SATA, and PATA device will be 00:0f.0. */
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
+				PCI_DEVICE_ID_VIA_VT8237R_LPC), 0);
+	if (dev == PCI_DEV_INVALID)
+		die("Southbridge not found!!!\r\n");
+	reg = pci_read_config8(dev, 0x50);
+	reg |= 0x08;
+	pci_write_config8(dev, 0x50, reg);
+}
+
+static const struct mem_controller ctrl = {
+	.d0f0 = 0x0000,
+	.d0f2 = 0x2000,
+	.d0f3 = 0x3000,
+	.d0f4 = 0x4000,
+	.d0f7 = 0x7000,
+	.d1f0 = 0x8000,
+	.channel0 = { 0x50 },
+};
+
+static void main(unsigned long bist)
+{
+	unsigned long x;
+	device_t dev;
+
+	/* Enable multifunction for northbridge. */
+	pci_write_config8(ctrl.d0f0, 0x4f, 0x01);
+
+	enable_vt8235_serial();
+	uart_init();
+	console_init();
+
+	print_spew("In auto.c:main()\r\n");
+
+	enable_smbus();
+	smbus_fixup(&ctrl);
+
+	if (bist == 0) {
+		print_debug("doing early_mtrr\r\n");
+		early_mtrr_init();
+	}
+
+	/* Halt if there was a built-in self test failure. */
+	report_bist_failure(bist);
+
+	print_debug("Enabling mainboard devices\r\n");
+	enable_mainboard_devices();
+
+	ddr_ram_setup(&ctrl);
+
+	/* ram_check(0, 640 * 1024); */
+
+	print_spew("Leaving auto.c:main()\r\n");
+}
diff --git a/src/mainboard/via/epia-cn/chip.h b/src/mainboard/via/epia-cn/chip.h
new file mode 100644
index 0000000000..ff91a02b98
--- /dev/null
+++ b/src/mainboard/via/epia-cn/chip.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_via_epia_cn_ops;
+
+struct mainboard_via_epia_cn_config {
+	int nothing;
+};
diff --git a/src/mainboard/via/epia-cn/cmos.layout b/src/mainboard/via/epia-cn/cmos.layout
new file mode 100644
index 0000000000..5ba4c032c1
--- /dev/null
+++ b/src/mainboard/via/epia-cn/cmos.layout
@@ -0,0 +1,74 @@
+entries
+
+#start-bit length  config config-ID    name
+#0            8       r       0        seconds
+#8            8       r       0        alarm_seconds
+#16           8       r       0        minutes
+#24           8       r       0        alarm_minutes
+#32           8       r       0        hours
+#40           8       r       0        alarm_hours
+#48           8       r       0        day_of_week
+#56           8       r       0        day_of_month
+#64           8       r       0        month
+#72           8       r       0        year
+#80           4       r       0        rate_select
+#84           3       r       0        REF_Clock
+#87           1       r       0        UIP
+#88           1       r       0        auto_switch_DST
+#89           1       r       0        24_hour_mode
+#90           1       r       0        binary_values_enable
+#91           1       r       0        square-wave_out_enable
+#92           1       r       0        update_finished_enable
+#93           1       r       0        alarm_interrupt_enable
+#94           1       r       0        periodic_interrupt_enable
+#95           1       r       0        disable_clock_updates
+#96         288       r       0        temporary_filler
+0          384       r       0        reserved_memory
+384          1       e       4        boot_option
+385          1       e       4        last_boot
+386          1       e       1        ECC_memory
+388          4       r       0        reboot_bits
+392          3       e       5        baud_rate
+400          1       e       1        power_on_after_fail
+412          4       e       6        debug_level
+416          4       e       7        boot_first
+420          4       e       7        boot_second
+424          4       e       7        boot_third
+428          4       h       0        boot_index
+432	     8       h       0        boot_countdown
+1008         16      h       0        check_sum
+
+enumerations
+
+#ID value   text
+1     0     Disable
+1     1     Enable
+2     0     Enable
+2     1     Disable
+4     0     Fallback
+4     1     Normal
+5     0     115200
+5     1     57600
+5     2     38400
+5     3     19200
+5     4     9600
+5     5     4800
+5     6     2400
+5     7     1200
+6     6     Notice
+6     7     Info
+6     8     Debug
+6     9     Spew
+7     0     Network
+7     1     HDD
+7     2     Floppy
+7     8     Fallback_Network
+7     9     Fallback_HDD
+7     10    Fallback_Floppy
+#7     3     ROM
+
+checksums
+
+checksum 392 1007 1008
+
+
diff --git a/src/mainboard/via/epia-cn/irq_tables.c b/src/mainboard/via/epia-cn/irq_tables.c
new file mode 100644
index 0000000000..fef553e219
--- /dev/null
+++ b/src/mainboard/via/epia-cn/irq_tables.c
@@ -0,0 +1,54 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <arch/pirq_routing.h>
+
+const struct irq_routing_table intel_irq_routing_table = {
+	PIRQ_SIGNATURE,
+	PIRQ_VERSION,
+	32 + 16 * IRQ_SLOT_COUNT,/* Max. number of devices on the bus */
+	0x00,			/* Interrupt router bus */
+	(0x11 << 3) | 0x0,	/* Interrupt router device */
+	0x828,			/* IRQs devoted exclusively to PCI usage */
+	0x1106,			/* Vendor */
+	0x596,			/* Device */
+	0,			/* Crap (miniport) */
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
+	0x3e,			/* Checksum */
+	{
+		/* bus,     dev|fn,   {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap},  slot, rfu */
+		{0x00,(0x08<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x1, 0x0},
+		{0x00,(0x09<<3)|0x0, {{0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0x0def8}}, 0x2, 0x0},
+		{0x00,(0x0a<<3)|0x0, {{0x03, 0xdef8}, {0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0x0def8}}, 0x3, 0x0},
+		{0x00,(0x0b<<3)|0x0, {{0x05, 0xdef8}, {0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0x0def8}}, 0x4, 0x0},
+		{0x00,(0x0c<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x5, 0x0},
+		{0x00,(0x11<<3)|0x0, {{0x00, 0xdef8}, {0x00, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
+		{0x00,(0x0f<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
+		{0x00,(0x01<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
+		{0x00,(0x10<<3)|0x0, {{0x01, 0xdef8}, {0x02, 0xdef8}, {0x03, 0xdef8}, {0x05, 0x0def8}}, 0x0, 0x0},
+		{0x00,(0x12<<3)|0x0, {{0x01, 0xdef8}, {0x00, 0xdef8}, {0x00, 0xdef8}, {0x00, 0x0def8}}, 0x0, 0x0},
+	}
+};
+
+unsigned long write_pirq_routing_table(unsigned long addr)
+{
+	return copy_pirq_routing_table(addr);
+}
diff --git a/src/mainboard/via/epia-cn/mainboard.c b/src/mainboard/via/epia-cn/mainboard.c
new file mode 100644
index 0000000000..e1eac58a62
--- /dev/null
+++ b/src/mainboard/via/epia-cn/mainboard.c
@@ -0,0 +1,27 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <device/device.h>
+#include "chip.h"
+
+struct chip_operations mainboard_via_epia_cn_ops = {
+	CHIP_NAME("VIA EPIA-CN Mainboard")
+};
diff --git a/src/northbridge/via/cn700/northbridge.c b/src/northbridge/via/cn700/northbridge.c
index 642661f308..3f4fe373d7 100644
--- a/src/northbridge/via/cn700/northbridge.c
+++ b/src/northbridge/via/cn700/northbridge.c
@@ -1,6 +1,8 @@
 /*
  * This file is part of the coreboot project.
  *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
  * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -34,9 +36,11 @@
 
 static void memctrl_init(device_t dev)
 {
+	device_t vlink_dev;
 	u16 reg16;
-	
-	pci_write_config8(dev, 0x86, 0x2d);
+	u8 ranks;
+	u8 pagec, paged, pagee, pagef;
+	u8 shadowreg;
 	
 	/* Set up the vga framebuffer size */
 	reg16 = (log2(CONFIG_VIDEO_MB) << 12) | (1 << 15);
@@ -45,8 +49,41 @@ static void memctrl_init(device_t dev)
 	/* Set up VGA timers */
 	pci_write_config8(dev, 0xa2, 0x44);
 	
-	pci_write_config16(dev, 0xb0, 0xaa60);
+	for (ranks = 0x4b; ranks >= 0x48; ranks--) {
+		if (pci_read_config8(dev, ranks)) {
+			ranks -= 0x48;
+			break;
+		}
+	}
+	if (ranks == 0x47)
+		ranks = 0x00;
+	reg16 = 0xaae0;
+	reg16 |= ranks;
+	/* GMINT Misc. FrameBuffer rank */
+	pci_write_config16(dev, 0xb0, reg16);
+	/* AGPCINT Misc. */
 	pci_write_config8(dev, 0xb8, 0x08);
+
+	/* shadown ram */
+	pagec = 0xff, paged = 0xff, pagee = 0xff, pagef = 0x30;
+	/* PAGE C, D, E are all read write enable */
+	pci_write_config8(dev, 0x80, pagec);
+	pci_write_config8(dev, 0x81, paged);
+	pci_write_config8(dev, 0x82, pagee);
+	/* PAGE F are read/writable */
+	shadowreg = pci_read_config8(dev, 0x83);
+	shadowreg |= pagef;
+	pci_write_config8(dev, 0x83, shadowreg);
+	/* vlink mirror */
+	vlink_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_CN700_VLINK, 0);
+	if (vlink_dev) {
+		pci_write_config8(vlink_dev, 0x61, pagec);
+		pci_write_config8(vlink_dev, 0x62, paged);
+		pci_write_config8(vlink_dev, 0x64, pagee);
+		shadowreg = pci_read_config8(vlink_dev, 0x63);
+		shadowreg |= pagef;
+		pci_write_config8(vlink_dev, 0x63, shadowreg);
+	}
 }
 
 static const struct device_operations memctrl_operations = {
@@ -124,7 +161,10 @@ static u32 find_pci_tolm(struct bus *bus)
 
 static void pci_domain_set_resources(device_t dev)
 {
-	static const u8 ramregs[] = {0x40, 0x41, 0x42, 0x43};
+	/* 
+	 * the order is important to find the correct ram size.
+	 */
+	static const u8 ramregs[] = {0x43, 0x42, 0x41, 0x40};
 	device_t mc_dev;
         u32 pci_tolm;
 
@@ -133,19 +173,25 @@ static void pci_domain_set_resources(device_t dev)
         pci_tolm = find_pci_tolm(&dev->link[0]);
 	mc_dev = dev_find_device(PCI_VENDOR_ID_VIA, 
 				PCI_DEVICE_ID_VIA_CN700_MEMCTRL, 0);
-	
+
 	if (mc_dev) {
 		unsigned long tomk, tolmk;
 		unsigned char rambits;
 		int i, idx;
 
+		/*
+		 * once the register value is not zero, the ramsize is
+		 * this register's value multiply 64 * 1024 * 1024
+		 */
 		for(rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
 			unsigned char reg;
-			reg = pci_read_config8(mc_dev, ramregs[i]);
-			rambits += reg;
+			rambits = pci_read_config8(mc_dev, ramregs[i]);
+			if (rambits != 0)
+				break;
 		}
 		
-		tomk = rambits;
+		tomk = rambits * 64 * 1024;
+		printk_spew("tomk is 0x%x\n", tomk);
 		/* Compute the Top Of Low Memory, in Kb */
 		tolmk = pci_tolm >> 10;
 		if (tolmk >= tomk) {
@@ -156,16 +202,15 @@ static void pci_domain_set_resources(device_t dev)
 		idx = 10;
 		/* TODO: Hole needed? */
 		ram_resource(dev, idx++, 0, 640); /* first 640k */
-		/* Leave a hole for vga */
-		ram_resource(dev, idx++, 768, (tolmk - 768 -
-						(CONFIG_VIDEO_MB * 1024)));
+		/* Leave a hole for vga, 0xa0000 - 0xc0000 */
+		ram_resource(dev, idx++, 768, (tolmk - 768 - CONFIG_VIDEO_MB * 1024));
 	}
 	assign_resources(&dev->link[0]);
 }
 
 static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
 {
-	printk_spew("Entering cn700 pci_domain_scan_bus.\n");
+	printk_debug("Entering cn700 pci_domain_scan_bus.\n");
 
         max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0, 0), 0xff, max);
         return max;
diff --git a/src/northbridge/via/cn700/raminit.c b/src/northbridge/via/cn700/raminit.c
index a9efd4e4d3..3a70e37440 100644
--- a/src/northbridge/via/cn700/raminit.c
+++ b/src/northbridge/via/cn700/raminit.c
@@ -1,6 +1,8 @@
 /*
  * This file is part of the coreboot project.
  *
+ * Copyright (C) 2008 VIA Technologies, Inc.
+ * (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
  * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -39,7 +41,7 @@
 #define DUMPNORTH()
 #endif
 
-static void do_ram_command(device_t dev, u8 command, u32 addr_offset)
+static void do_ram_command(device_t dev, u8 command)
 {
 	u8 reg;
 
@@ -55,11 +57,8 @@ static void do_ram_command(device_t dev, u8 command, u32 addr_offset)
 	PRINT_DEBUG_MEM(" to 0x");
 	PRINT_DEBUG_MEM_HEX32(0 + addr_offset);
 	PRINT_DEBUG_MEM("\r\n");
-
-	read32(0 + addr_offset);
 }
 
-
 /**
  * Configure the bus between the cpu and the northbridge. This might be able to 
  * be moved to post-ram code in the future. For the most part, these registers
@@ -83,7 +82,7 @@ static void c7_cpu_setup(device_t dev)
 	/* Arbitration */
 	pci_write_config8(dev, 0x53, 0x88);
 	/* Miscellaneous Control */
-	pci_write_config8(dev, 0x54, 0x10);
+	pci_write_config8(dev, 0x54, 0x1e);
 	pci_write_config8(dev, 0x55, 0x16);
 	/* Write Policy */
 	pci_write_config8(dev, 0x56, 0x01);
@@ -93,9 +92,8 @@ static void c7_cpu_setup(device_t dev)
 	 *	010 : 166MHz	011 : 200MHz
 	 *	100 : 266MHz	101 : 333MHz
 	 *	110/111 : Reserved */
-	//pci_write_config8(dev, 0x57, 0x60);//set 200MHz dram clock
 	/* CPU Miscellaneous Control */
-	pci_write_config8(dev, 0x59, 0x60);
+	pci_write_config8(dev, 0x59, 0x44);	
 	/* Write Policy */
 	pci_write_config8(dev, 0x5d, 0xb2);
 	/* Bandwidth Timer */
@@ -113,16 +111,16 @@ static void c7_cpu_setup(device_t dev)
 	pci_write_config8(dev, 0x65, 0x0f);
 	/* Read Line Burst DRDY# Timing Control */
 	pci_write_config8(dev, 0x66, 0xff);
-	pci_write_config8(dev, 0x67, 0x70);
+	pci_write_config8(dev, 0x67, 0x30);
 		
 	/* Host Bus IO Circuit (See datasheet) */
 	/* Host Address Pullup/down Driving */
-	pci_write_config8(dev, 0x70, 0x33);
-	pci_write_config8(dev, 0x71, 0x00);
-	pci_write_config8(dev, 0x72, 0x33);
-	pci_write_config8(dev, 0x73, 0x00);
+	pci_write_config8(dev, 0x70, 0x11);
+	pci_write_config8(dev, 0x71, 0x11);
+	pci_write_config8(dev, 0x72, 0x11);
+	pci_write_config8(dev, 0x73, 0x11);
 	/* Miscellaneous Control */
-	pci_write_config8(dev, 0x74, 0x00);
+	pci_write_config8(dev, 0x74, 0x35);
 	/* AGTL+ I/O Circuit */
 	pci_write_config8(dev, 0x75, 0x28);
 	/* AGTL+ Compensation Status */
@@ -135,12 +133,123 @@ static void c7_cpu_setup(device_t dev)
 	pci_write_config8(dev, 0x79, 0xaa);
 	/* Address Strobe Input Delay Control */
 	pci_write_config8(dev, 0x7a, 0x24);
-	/* Address CKG Rising/Falling Time Control */
-	pci_write_config8(dev, 0x7b, 0x00);
+	// Address CKG Rising/Falling Time Control
+	pci_write_config8(dev, 0x7b, 0xaa);
 	/* Address CKG Clock Rising/Falling Time Control */
 	pci_write_config8(dev, 0x7c, 0x00);
 	/* Undefined (can't remember why I did this) */
-	pci_write_config8(dev, 0x7d, 0x6d);	
+	pci_write_config8(dev, 0x7d, 0x6d);
+	pci_write_config8(dev, 0x7e, 0x00);
+	pci_write_config8(dev, 0x7f, 0x00);
+	pci_write_config8(dev, 0x80, 0x1b);
+	pci_write_config8(dev, 0x81, 0x0a);
+	pci_write_config8(dev, 0x82, 0x0a);
+	pci_write_config8(dev, 0x83, 0x0a);
+}
+
+/**
+ * Set up dram size according to spd data. Eventually, DRAM timings should be 
+ * done in a similar manner.
+ *
+ * @param ctrl The northbridge devices and spd addresses.
+ */
+static void sdram_set_size(const struct mem_controller *ctrl)
+{
+	u8 density, ranks, result, col;
+
+	ranks = spd_read_byte(ctrl->channel0[0], SPD_NUM_DIMM_BANKS);
+	ranks = (ranks & 0x07) + 1;
+	density = spd_read_byte(ctrl->channel0[0], SPD_DENSITY_OF_EACH_ROW_ON_MODULE);
+	switch (density)
+	{
+		case 0x80:
+			result = 0x08;	/* 512MB / 64MB = 0x08 */
+			break;
+		case 0x40:
+			result = 0x04;
+			break;
+		case 0x20:
+			result = 0x02;
+			break;
+		case 0x10:
+			result = 0xff;	/* 16GB */
+			break;
+		case 0x08:
+			result = 0xff;	/* 8GB */
+			break;
+		case 0x04:
+			result = 0xff;	/* 4GB */
+			break;
+		case 0x02:
+			result = 0x20;	/* 2GB */
+			break;
+		case 0x01:
+			result = 0x10;	/* 1GB */
+			break;
+	}
+
+	if (result == 0xff)
+		die("dram module size too big, not supported by cn700\r\n");
+
+	pci_write_config8(ctrl->d0f3, 0x40, result);
+	pci_write_config8(ctrl->d0f3, 0x48, 0x00);
+	if (ranks == 2) {
+		pci_write_config8(ctrl->d0f3, 0x41, result * ranks);
+		pci_write_config8(ctrl->d0f3, 0x49, result);
+	}
+	/* size mirror */
+	pci_write_config8(ctrl->d0f7, 0xe5, (result * ranks) << 2);
+	pci_write_config8(ctrl->d0f7, 0x57, (result * ranks) << 2);
+	/* Low Top Address */
+	pci_write_config8(ctrl->d0f3, 0x84, 0x00);
+	pci_write_config8(ctrl->d0f3, 0x85, (result * ranks) << 2);
+	pci_write_config8(ctrl->d0f3, 0x88, (result * ranks) << 2);
+
+	/* Physical-Virtual Mapping */
+	if (ranks == 2)
+		pci_write_config8(ctrl->d0f3, 0x54, 1 << 7 | 0 << 4 | 1 << 3 | 1 << 0);
+	if (ranks == 1)
+		pci_write_config8(ctrl->d0f3, 0x54, 1 << 7 | 0 << 4);
+	pci_write_config8(ctrl->d0f3, 0x55, 0x00);
+	/* virtual rank interleave, disable */
+	pci_write_config32(ctrl->d0f3, 0x58, 0x00);
+
+	/* MA Map Type */
+	result = spd_read_byte(ctrl->channel0[0], SPD_NUM_BANKS_PER_SDRAM);
+	if (result == 8) {
+		col = spd_read_byte(ctrl->channel0[0], SPD_NUM_COLUMNS);
+		switch (col)
+		{
+			case 10:
+				pci_write_config8(ctrl->d0f3, 0x50, 0xa0);
+				break;
+			case 11:
+				pci_write_config8(ctrl->d0f3, 0x50, 0xc0);
+				break;
+			case 12:
+				pci_write_config8(ctrl->d0f3, 0x50, 0xe0);
+				break;
+		}
+	}
+	else if (result == 4) {
+		col = spd_read_byte(ctrl->channel0[0], SPD_NUM_COLUMNS);
+		switch (col)
+		{
+			case 9:
+				pci_write_config8(ctrl->d0f3, 0x50, 0x00);
+				break;
+			case 10:
+				pci_write_config8(ctrl->d0f3, 0x50, 0x20);
+				break;
+			case 11:
+				pci_write_config8(ctrl->d0f3, 0x50, 0x40);
+				break;
+			case 12:
+				pci_write_config8(ctrl->d0f3, 0x50, 0x60);
+				break;
+		}
+	}
+	pci_write_config8(ctrl->d0f3, 0x51, 0x00);
 }
 
 /**
@@ -150,224 +259,204 @@ static void c7_cpu_setup(device_t dev)
  */
 static void sdram_set_registers(const struct mem_controller *ctrl)
 {
-	/* DQ/DQS Strength Control */
-	pci_write_config8(ctrl->d0f3, 0xd0, 0x88);
-	pci_write_config8(ctrl->d0f3, 0xd1, 0x8b);
-	pci_write_config8(ctrl->d0f3, 0xd2, 0x89);
-	/* SMM and APIC Decoding */
-	pci_write_config8(ctrl->d0f3, 0x86, 0x2d);
+	u8 reg;
+
+	/* Set WR=5 */
+	pci_write_config8(ctrl->d0f3, 0x61, 0xe0);
+	/* Set CAS=4 */
+	pci_write_config8(ctrl->d0f3, 0x62, 0xfa);
+	/* dram timing-3 */
+	pci_write_config8(ctrl->d0f3, 0x63, 0xca);
+	/* dram timing-4 */
+	pci_write_config8(ctrl->d0f3, 0x64, 0xcc);
+	/* DIMM command / Address Selection */
+	pci_write_config8(ctrl->d0f3, 0x67, 0x00);
+	/* Disable cross bank/multi page mode */
+	pci_write_config8(ctrl->d0f3, 0x69, 0x00);
+	/* disable refresh now */
+	pci_write_config8(ctrl->d0f3, 0x6a, 0x00);
+
+	/* frequency 100MHZ */
+	pci_write_config8(ctrl->d0f3, 0x90, 0x00);
+	pci_write_config8(ctrl->d0f2, 0x57, 0x18);
+	/* Allow manual dll reset */
+	pci_write_config8(ctrl->d0f3, 0x6b, 0x10);
+
+	/* Bank/Rank Interleave Address Select */
+	pci_write_config8(ctrl->d0f3, 0x52, 0x33);
+	pci_write_config8(ctrl->d0f3, 0x53, 0x3f);
 	
-	/* Driving selection */
-	/* DQ / DQS ODT Driving and Range Select */
+	/* Set to DDR2 sdram, BL=8 (0xc8, 0xc0 for bl=4) */
+	pci_write_config8(ctrl->d0f3, 0x6c, 0xc8);
+
+	/* DRAM Bus Turn-Around Setting */
+	pci_write_config8(ctrl->d0f3, 0x60, 0x03);
+	/* DRAM Arbitration Control */
+	pci_write_config8(ctrl->d0f3, 0x66, 0x80);
+	/* DQS Tuning: testing on a couple different boards has shown this is
+	 * static, or close enough that it can be. Which is good, because the
+ 	 * tuning function used too many registers
+	 */
+	/* DQS Output Delay for CHannel A */
+	pci_write_config8(ctrl->d0f3, 0x70, 0x00);
+	/* MD Output Delay for Channel A */
+	pci_write_config8(ctrl->d0f3, 0x71, 0x01);
+	pci_write_config8(ctrl->d0f3, 0x73, 0x01);
+
+	/* dram arbitration timer */
+	pci_write_config8(ctrl->d0f3, 0x65, 0xd9);
+
+	/* dram signal timing control */
+	pci_write_config8(ctrl->d0f3, 0x74, 0x01);
+	pci_write_config8(ctrl->d0f3, 0x75, 0x01);
+	pci_write_config8(ctrl->d0f3, 0x76, 0x06);
+	pci_write_config8(ctrl->d0f3, 0x77, 0x92);
+	pci_write_config8(ctrl->d0f3, 0x78, 0x83);
+	pci_write_config8(ctrl->d0f3, 0x79, 0x83);
+	pci_write_config8(ctrl->d0f3, 0x7a, 0x00);
+	pci_write_config8(ctrl->d0f3, 0x7b, 0x10);
+
+	/* dram clocking control */
+	pci_write_config8(ctrl->d0f3, 0x91, 0x01);
+	/* CS/CKE Clock Phase Control */
+	pci_write_config8(ctrl->d0f3, 0x92, 0x02);
+	/* SCMD/MA Clock Phase Control */
+	pci_write_config8(ctrl->d0f3, 0x93, 0x02);
+	/* DCLKO Feedback Mode Output Control */
+	pci_write_config8(ctrl->d0f3, 0x94, 0x00);
+	pci_write_config8(ctrl->d0f3, 0x9d, 0x0f);
+	
+	/* SDRAM ODT Control */
+	pci_write_config8(ctrl->d0f3, 0xda, 0x80);
+	/* Channel A DQ/DQS CKG Output Delay Control */
+	pci_write_config8(ctrl->d0f3, 0xdc, 0x54);
+	/* Channel A DQ/DQS CKG Output Delay Control */
+	pci_write_config8(ctrl->d0f3, 0xdd, 0x55);
+	/* odt lookup table */
+	pci_write_config8(ctrl->d0f3, 0xd8, 0x01);
+	pci_write_config8(ctrl->d0f3, 0xd9, 0x0a);
+
+	/* ddr sdram control */
+	pci_write_config8(ctrl->d0f3, 0x6d, 0xc0);
+	pci_write_config8(ctrl->d0f3, 0x6f, 0x41);
+
+	/* DQ/DQS Strength Control */
+	pci_write_config8(ctrl->d0f3, 0xd0, 0xaa);
+
+	/* Compensation Control */
+	pci_write_config8(ctrl->d0f3, 0xd3, 0x01); /*enable auto compensation*/
+	/* ODT (some are set with driving select above) */
+	pci_write_config8(ctrl->d0f3, 0xd4, 0x80);
 	pci_write_config8(ctrl->d0f3, 0xd5, 0x8a);
 	/* Memory Pads Driving and Range Select */
 	pci_write_config8(ctrl->d0f3, 0xd6, 0xaa);
-	/* DRAM Driving – Group DQS */
+
 	pci_write_config8(ctrl->d0f3, 0xe0, 0xee);
-	/* DRAM Driving – Group DQ (DQ, MPD, DQM) */
-	pci_write_config8(ctrl->d0f3, 0xe2, 0xac);//ba
-	/* DRAM Driving – Group CS */
+	pci_write_config8(ctrl->d0f3, 0xe2, 0xac);
 	pci_write_config8(ctrl->d0f3, 0xe4, 0x66);
-	/* DRAM Driving – Group MA */
+	pci_write_config8(ctrl->d0f3, 0xe6, 0x33);
 	pci_write_config8(ctrl->d0f3, 0xe8, 0x86);
-	/* DRAM Driving – Group MCLK */
-	pci_write_config8(ctrl->d0f3, 0xe6, 0xaa);
-
-	/* ODT (some are set with driving select above) */
-	/* Memory Pad ODT Pullup / Pulldown Control */
-	pci_write_config8(ctrl->d0f3, 0xd4, 0x0a);
-	/* Memory Ranks ODT Lookup Table */
-	pci_write_config8(ctrl->d0f3, 0xd8, 0x00);//was 1
-	/* Compensation Control */
-	pci_write_config8(ctrl->d0f3, 0xd3, 0x89);//enable auto compensation
-	
-	/* MCLKO Phase Control */
-	pci_write_config8(ctrl->d0f3, 0x91, 0x02);
-	/* CS/CKE Clock Phase Control */
-	pci_write_config8(ctrl->d0f3, 0x92, 0x06);
-	/* SCMD/MA Clock Phase Control */
-	pci_write_config8(ctrl->d0f3, 0x93, 0x07);
-	/* Channel A DQS Input Capture Range Control */
-	pci_write_config8(ctrl->d0f3, 0x78, 0x83);
-	/* DQS Input Capture Range Control */
-	/* Set in accordance with the BIOS update note */
-	pci_write_config8(ctrl->d0f3, 0x7a, 0x00);
-	/* DQS Input Delay Offset Control */
-	pci_write_config8(ctrl->d0f3, 0x7c, 0x00);
-	/* SDRAM ODT Control */
-	pci_write_config8(ctrl->d0f3, 0xda, 0x80);
-	/* DQ/DQS CKG Output Delay Control - I */
-	pci_write_config8(ctrl->d0f3, 0xdc, 0xff);
-	/* DQ/DQS CKG Output Delay Control - II */
-	pci_write_config8(ctrl->d0f3, 0xdd, 0xff);
 	/* DQS / DQ CKG Duty Cycle Control */
-	pci_write_config8(ctrl->d0f3, 0xec, 0x88);
+	pci_write_config8(ctrl->d0f3, 0xec, 0x00);
 	/* MCLK Output Duty Control */
 	pci_write_config8(ctrl->d0f3, 0xee, 0x00);
-	pci_write_config8(ctrl->d0f3, 0xed, 0x10);
 	/* DQS CKG Input Delay Control */
 	pci_write_config8(ctrl->d0f3, 0xef, 0x10);
-
-	pci_write_config8(ctrl->d0f3, 0x77, 0x9d);
-	pci_write_config8(ctrl->d0f3, 0x79, 0x83);
-	pci_write_config16(ctrl->d0f3, 0x88, 0x0020);
 	
-	pci_write_config8(ctrl->d0f4, 0xa7, 0x80);
+	/* dram duty control */
+	pci_write_config8(ctrl->d0f3, 0xed, 0x10);
 
-	/* VLink Control */
-	pci_write_config8(ctrl->d0f7, 0xb0, 0x05);
-	pci_write_config8(ctrl->d0f7, 0xb1, 0x01);
-	
-	/* Memory base */
-	pci_write_config16(ctrl->d1f0, 0x20, 0xfb00);
-	/* Memory limit */
-	pci_write_config16(ctrl->d1f0, 0x22, 0xfcf0);
-	/* Prefetch memory base */
-	pci_write_config16(ctrl->d1f0, 0x24, 0xf400);
-	/* Prefetch memory limit */
-	pci_write_config16(ctrl->d1f0, 0x26, 0xf7f0);
-	/* PCI to PCI bridge control */
-	pci_write_config16(ctrl->d1f0, 0x3e, 0x0008);
-	
-	/* CPU to PCI flow control 1 */
-	pci_write_config8(ctrl->d1f0, 0x40, 0x83);
-	pci_write_config8(ctrl->d1f0, 0x41, 0xc3);//clear reset error, set to 43
-	pci_write_config8(ctrl->d1f0, 0x42, 0xe2);
-	pci_write_config8(ctrl->d1f0, 0x43, 0x44);
-	pci_write_config8(ctrl->d1f0, 0x44, 0x34);
-	pci_write_config8(ctrl->d1f0, 0x45, 0x72);
+	/* SMM and APIC deocoding, we donot use SMM */
+	reg = 0x29;
+	pci_write_config8(ctrl->d0f3, 0x86, reg);
+	/* SMM and APIC decoding mirror */
+	pci_write_config8(ctrl->d0f7, 0xe6, reg);
 
-	/* Disable cross bank/multi page mode */
-	pci_write_config8(ctrl->d0f3, DDR_PAGE_CTL, 0x80);
-	pci_write_config8(ctrl->d0f3, DRAM_REFRESH_COUNTER, 0x00);
-
-	/* Set WR=5 and RFC */
-	pci_write_config8(ctrl->d0f3, 0x61, 0xc7);
-	/* Set CAS=5 */
-	pci_write_config8(ctrl->d0f3, 0x62, 0xaf);
-	pci_write_config8(ctrl->d0f3, 0x63, 0xca);
-	/* Set to DDR2 sdram, BL=8 (0xc8, 0xc0 for bl=4) */
-	pci_write_config8(ctrl->d0f3, 0x6c, 0xc8);
-	/* Allow manual dll reset */
-	pci_write_config8(ctrl->d0f3, 0x6b, 0x10);
-	
+	/* dram module configuration */
 	pci_write_config8(ctrl->d0f3, 0x6e, 0x89);
-	pci_write_config8(ctrl->d0f3, 0x67, 0x50);
-	pci_write_config8(ctrl->d0f3, 0x65, 0xd9);
-	
-	/* Only enable bank 1, for now */
-	/* TODO: Multiple, dynamically controlled bank enables */
-	pci_write_config8(ctrl->d0f3, 0x54, 0x80);
-	pci_write_config8(ctrl->d0f3, 0x55, 0x00);
-	
-	/* Set to 2T, MA Map type 1. 
-	 * TODO: Needs to become dynamic */
-	pci_write_config16(ctrl->d0f3, 0x50, 0x0020);
-
-	/* BA0-2 Selection. Don't mess with */
-	pci_write_config8(ctrl->d0f3, 0x52, 0x33);
-	pci_write_config8(ctrl->d0f3, 0x53, 0x3f);
-	
-	/* Disable bank interleaving. This feature seems useless anyways */
-	pci_write_config32(ctrl->d0f3, 0x58, 0x00000000);
-	pci_write_config8(ctrl->d0f3, 0x88, 0x08);
-
-	/* Some DQS control stuffs */
-	pci_write_config8(ctrl->d0f3, 0x74, 0x04);
-	pci_write_config8(ctrl->d0f3, 0x75, 0x04);
-	pci_write_config8(ctrl->d0f3, 0x76, 0x00);
 }
 
-/**
- * Set up dram size according to spd data. Eventually, DRAM timings should be 
- * done in a similar manner.
- *
- * @param ctrl The northbridge devices and spd addresses.
- */
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+static void sdram_set_post(const struct mem_controller *ctrl)
 {
-	u8 spd_data, spd_data2;
+	device_t dev = ctrl->d0f3;
+	/* Enable multipage mode. */
+	pci_write_config8(dev, 0x69, 0x03);
+
+	/* Enable refresh. */
+	pci_write_config8(dev, 0x6a, 0x32);
+
+	// vga device
+	pci_write_config16(dev, 0xa0, (1 <<15));
+	pci_write_config16(dev, 0xa4, 0x0010);
 	
-	/* DRAM Bank Size */
-	spd_data = spd_read_byte(ctrl->channel0[0],
-					SPD_DENSITY_OF_EACH_ROW_ON_MODULE);
-	/* I know this seems weird. Blame JEDEC/Via. */
-	if(spd_data >= 0x10)
-		spd_data = spd_data >> 1;
-	else
-		spd_data = spd_data << 1;
-
-	/* Check for double sided dimm and adjust size accordingly */
-	spd_data2 = spd_read_byte(ctrl->channel0[0], SPD_NUM_BANKS_PER_SDRAM);
-	/* There should be 4 banks on a single sided dimm, 
-	 * or 8 on a dual sided one */
-	spd_data = spd_data * (spd_data2 / 4);
-	pci_write_config8(ctrl->d0f3, 0x40, spd_data);
-	/* TODO: The rest of the DIMMs */
 }
 
-static void sdram_enable(device_t dev)
+static void sdram_enable(device_t dev, unsigned long rank_address)
 {
-	int i;
+	u8 i;
 
 	/* 1. Apply NOP. */
 	PRINT_DEBUG_MEM("RAM Enable 1: Apply NOP\r\n");
-	do_ram_command(dev, RAM_COMMAND_NOP, 0);
-	udelay(200);
+	do_ram_command(dev, RAM_COMMAND_NOP);
+	udelay(100);
+	read32(rank_address + 0x10);
 
 	/* 2. Precharge all. */
+	udelay(400);
 	PRINT_DEBUG_MEM("RAM Enable 2: Precharge all\r\n");
-	do_ram_command(dev, RAM_COMMAND_PRECHARGE, 0);
+	do_ram_command(dev, RAM_COMMAND_PRECHARGE);
+	read32(rank_address + 0x10);
 
 	/* 3. Mode register set. */
 	PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n");
-	do_ram_command(dev, RAM_COMMAND_MRS, 0x2000);//enable dll
-	do_ram_command(dev, RAM_COMMAND_MRS, 0x800);//reset dll
+	do_ram_command(dev, RAM_COMMAND_MRS);
+	read32(rank_address + 0x120000);// EMRS DLL Enable
+	read32(rank_address + 0x800); 	// MRS DLL Reset
 	
 	/* 4. Precharge all again. */
 	PRINT_DEBUG_MEM("RAM Enable 2: Precharge all\r\n");
-	do_ram_command(dev, RAM_COMMAND_PRECHARGE, 0);
+	do_ram_command(dev, RAM_COMMAND_PRECHARGE);
+	read32(rank_address + 0x0);
 	
 	/* 5. Perform 8 refresh cycles. Wait tRC each time. */
 	PRINT_DEBUG_MEM("RAM Enable 3: CBR\r\n");
-	do_ram_command(dev, RAM_COMMAND_CBR, 0);
-	/* First read is actually done by do_ram_command */
-	for(i = 0; i < 7; i++) {
+	do_ram_command(dev, RAM_COMMAND_CBR);
+	for(i = 0; i < 8; i++) {
+		read32(rank_address + 0x20);
 		udelay(100);
-		read32(0);
 	}
 
 	/* 6. Mode register set. */
 	PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n");
-	//safe value for now, BL=8, WR=5, CAS=5
+	//safe value for now, BL=8, WR=5, CAS=4
 	/* (E)MRS values are from the BPG. No direct explanation is given, but 
 	 * they should somehow conform to the JEDEC DDR2 SDRAM Specification
 	 * (JESD79-2C). */
-	do_ram_command(dev, RAM_COMMAND_MRS, 0x0022d8);
-	
-	/* 7. Mode register set. */
-	PRINT_DEBUG_MEM("RAM Enable 4: Mode register set\r\n");
-	do_ram_command(dev, RAM_COMMAND_MRS, 0x21c20);//default OCD calibration
-	do_ram_command(dev, RAM_COMMAND_MRS, 0x20020);//exit calibration mode
+	do_ram_command(dev, RAM_COMMAND_MRS);
+	read32(rank_address + 0x002258);	// MRS command
+	read32(rank_address + 0x121c20);	// EMRS OCD Default
+	read32(rank_address + 0x120020);	// EMRS OCD Calibration Mode Exit
 	
 	/* 8. Normal operation */
 	PRINT_DEBUG_MEM("RAM Enable 5: Normal operation\r\n");
-	do_ram_command(dev, RAM_COMMAND_NORMAL, 0);
-	
-	/* Enable multipage mode. */
-	pci_write_config8(dev, DDR_PAGE_CTL, 0x83);
-	/* Enable refresh. */
-	pci_write_config8(dev, DRAM_REFRESH_COUNTER, 0x32);
-	
-	/* DQS Tuning: testing on a couple different boards has shown this is
-	 * static, or close enough that it can be. Which is good, because the
-	 * tuning function used too many registers. */
-	pci_write_config8(dev, CH_A_DQS_OUTPUT_DELAY, 0x00);
-	pci_write_config8(dev, CH_A_MD_OUTPUT_DELAY, 0x03);
-
-	/* Enable VGA device with no memory, add memory later. We need this
-	 * here to enable the actual device, otherwise it won't show up until
-	 * later and LB will have a fit. */
-	pci_write_config16(dev, 0xa0, (1 << 15));
-	pci_write_config16(dev, 0xa4, 0x0010);
+	do_ram_command(dev, RAM_COMMAND_NORMAL);
+	read32(rank_address + 0x30);
+}
+
+/*
+ * Support one dimm with up to 2 ranks
+ */
+static void ddr_ram_setup(const struct mem_controller *ctrl)
+{
+	u8 reg;
+
+	c7_cpu_setup(ctrl->d0f2);
+	sdram_set_registers(ctrl);
+	sdram_set_size(ctrl);
+	sdram_enable(ctrl->d0f3, 0);
+	reg = pci_read_config8(ctrl->d0f3, 0x41);
+	if (reg != 0)
+		sdram_enable(ctrl->d0f3, pci_read_config8(ctrl->d0f3, 0x40) << 26);
+	sdram_set_post(ctrl);
 }
+
diff --git a/targets/via/epia-cn/Config.lb b/targets/via/epia-cn/Config.lb
new file mode 100644
index 0000000000..359659c12c
--- /dev/null
+++ b/targets/via/epia-cn/Config.lb
@@ -0,0 +1,36 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2008 VIA Technologies, Inc.
+## (Written by Aaron Lwe <aaron.lwe@gmail.com> for VIA)
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+##
+
+target via_epia_cn
+mainboard via/epia-cn
+
+#
+# Generate the final ROM like this:
+# cat vgabios bochsbios coreboot.rom > coreboot.rom.final
+#
+option ROM_SIZE = (512 * 1024) - (64 * 1024) - (64 * 1024)
+
+romimage "image"
+	option COREBOOT_EXTRA_VERSION = "-epiacn"
+	payload ../payload.elf
+end
+
+buildrom ./coreboot.rom ROM_SIZE "image"