AMD/bettong: Add UART support

The function delay in uart8250mem.c is not enough for hudson. I guess
there are some problems in lapic_timer(). I uploaded a patch to gerrit
to show the way to enable UART feature.
http://review.coreboot.org/#/c/12343/4

Currently the HUDSON_UART is unchecked by default. Select HUDSON_UART to
enable this feature.

The UART is test at BIOS stage.

Since it is not a standart UART device, the windows internal UART driver
doesnt support it. I guess we need a driver to use it on windows.

Change-Id: I4cec833cc2ff8069c82886837f7cbd4483ff11bb
Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: http://review.coreboot.org/11749
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

5 files changed, 58 insertions, 0 deletions

diff --git a/src/mainboard/amd/bettong/romstage.c b/src/mainboard/amd/bettong/romstage.c
index 6399804ac2..b0ec8fdc19 100644
--- a/src/mainboard/amd/bettong/romstage.c
+++ b/src/mainboard/amd/bettong/romstage.c
@@ -39,6 +39,9 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
 	if (!cpu_init_detectedx && boot_cpu()) {
 		post_code(0x30);
 
+#if IS_ENABLED(CONFIG_HUDSON_UART)
+		configure_hudson_uart();
+#endif
 		post_code(0x31);
 		console_init();
 	}
diff --git a/src/southbridge/amd/pi/hudson/Kconfig b/src/southbridge/amd/pi/hudson/Kconfig
index c720791a83..94a313d19d 100644
--- a/src/southbridge/amd/pi/hudson/Kconfig
+++ b/src/southbridge/amd/pi/hudson/Kconfig
@@ -227,3 +227,19 @@ config AZ_PIN
 	  bit 5,4 - pin 2
 	  bit 7,6 - pin 3
 endif
+
+config HUDSON_UART
+	bool "UART controller on Kern."
+	default n
+	depends on SOUTHBRIDGE_AMD_PI_KERN
+	select DRIVERS_UART_8250MEM
+	select DRIVERS_UART_8250MEM_32
+	select NO_UART_ON_SUPERIO
+	help
+	  There are two UART controllers in Kern.
+	  The UART registers are memory-mapped. UART
+	  controller 0 registers range from FEDC_6000h
+	  to FEDC_6FFFh. UART controller 1 registers
+	  range from FEDC_8000h to FEDC_8FFFh.
+
+
diff --git a/src/southbridge/amd/pi/hudson/Makefile.inc b/src/southbridge/amd/pi/hudson/Makefile.inc
index fb775c50c5..81558d3217 100644
--- a/src/southbridge/amd/pi/hudson/Makefile.inc
+++ b/src/southbridge/amd/pi/hudson/Makefile.inc
@@ -50,6 +50,11 @@ romstage-y += imc.c
 ramstage-y += imc.c
 endif
 
+ifeq ($(CONFIG_HUDSON_UART), y)
+romstage-y += uart.c
+ramstage-y += uart.c
+endif
+
 smm-$(CONFIG_HAVE_SMI_HANDLER) += smihandler.c smi_util.c
 ramstage-$(CONFIG_HAVE_SMI_HANDLER) += smi.c smi_util.c
 
diff --git a/src/southbridge/amd/pi/hudson/early_setup.c b/src/southbridge/amd/pi/hudson/early_setup.c
index 14ffd8b82b..f4fcf8b472 100644
--- a/src/southbridge/amd/pi/hudson/early_setup.c
+++ b/src/southbridge/amd/pi/hudson/early_setup.c
@@ -26,6 +26,37 @@
 #include "hudson.h"
 #include "pci_devs.h"
 
+#if IS_ENABLED(CONFIG_HUDSON_UART)
+
+#include <cpu/x86/msr.h>
+#include <delay.h>
+#include <Fch/Fch.h>
+
+void configure_hudson_uart(void)
+{
+	msr_t msr;
+	u8 byte;
+
+	msr = rdmsr(0x1B);
+	msr.lo |= 1 << 11;
+	wrmsr(0x1B, msr);
+	byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2);
+	byte |= 1 << 3;
+	write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56 + CONFIG_UART_FOR_CONSOLE * 2, byte);
+	byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62);
+	byte |= 1 << 3;
+	write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62, byte);
+	write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0);
+	write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0);
+	write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0);
+	write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
+
+	udelay(2000);
+	write8((void *)0xFEDC6000 + 0x2000 * CONFIG_UART_FOR_CONSOLE + 0x88, 0x01); /* reset UART */
+}
+
+#endif
+
 void hudson_pci_port80(void)
 {
 	u8 byte;
diff --git a/src/southbridge/amd/pi/hudson/hudson.h b/src/southbridge/amd/pi/hudson/hudson.h
index 6f37c90ea4..23d9b3135d 100644
--- a/src/southbridge/amd/pi/hudson/hudson.h
+++ b/src/southbridge/amd/pi/hudson/hudson.h
@@ -112,6 +112,9 @@ void hudson_clk_output_48Mhz(void);
 
 int s3_save_nvram_early(u32 dword, int size, int  nvram_pos);
 int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
+#if IS_ENABLED(CONFIG_HUDSON_UART)
+void configure_hudson_uart(void);
+#endif
 
 #else
 void hudson_enable(device_t dev);