summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRonald G. Minnich <rminnich@gmail.com>2004-11-10 15:12:48 +0000
committerRonald G. Minnich <rminnich@gmail.com>2004-11-10 15:12:48 +0000
commit52c2277a1bfadcf9fca9e70a313a9a7f30db0069 (patch)
treed28271bf4f3b115c9d9125b607979a8118862272
parent132368b4c58cf74fc0347f4ab72bdf467e2a62a3 (diff)
downloadcoreboot-52c2277a1bfadcf9fca9e70a313a9a7f30db0069.tar.xz
adl855pc support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1772 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/cpu/intel/socket_mPGA479M/chip.h4
-rw-r--r--src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c2
-rw-r--r--src/northbridge/intel/i855pm/chip.h2
-rw-r--r--src/northbridge/intel/i855pm/northbridge.c2
-rw-r--r--src/northbridge/intel/i855pm/raminit.c488
-rw-r--r--targets/digitallogic/adl855pc/Config.lb89
6 files changed, 63 insertions, 524 deletions
diff --git a/src/cpu/intel/socket_mPGA479M/chip.h b/src/cpu/intel/socket_mPGA479M/chip.h
index b157416a1a..57e9bd5bcb 100644
--- a/src/cpu/intel/socket_mPGA479M/chip.h
+++ b/src/cpu/intel/socket_mPGA479M/chip.h
@@ -1,4 +1,4 @@
-extern struct chip_operations cpu_intel_socket_mPGA479_control;
+extern struct chip_operations cpu_intel_socket_mPGA479M_ops;
-struct cpu_intel_socket_mPGA479_config {
+struct cpu_intel_socket_mPGA479M_config {
};
diff --git a/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c b/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c
index ba22e3bb63..56642c3857 100644
--- a/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c
+++ b/src/cpu/intel/socket_mPGA479M/socket_mPGA479M.c
@@ -2,6 +2,6 @@
#include "chip.h"
-struct chip_opertations cpu_intel_socket_mPGA479M_control = {
+struct chip_operations cpu_intel_socket_mPGA479M_ops = {
CHIP_NAME("socket mPGA479M")
};
diff --git a/src/northbridge/intel/i855pm/chip.h b/src/northbridge/intel/i855pm/chip.h
index 3f6921f2ee..9b14183aad 100644
--- a/src/northbridge/intel/i855pm/chip.h
+++ b/src/northbridge/intel/i855pm/chip.h
@@ -2,4 +2,4 @@ struct northbridge_intel_i855pm_config
{
};
-extern struct chip_operations northbridge_intel_i855pm_control;
+extern struct chip_operations northbridge_intel_i855pm_ops;
diff --git a/src/northbridge/intel/i855pm/northbridge.c b/src/northbridge/intel/i855pm/northbridge.c
index 3021397085..c311a05edc 100644
--- a/src/northbridge/intel/i855pm/northbridge.c
+++ b/src/northbridge/intel/i855pm/northbridge.c
@@ -156,7 +156,7 @@ static void enable_dev(struct device *dev)
}
}
-struct chip_operations northbridge_intel_i855pm_control = {
+struct chip_operations northbridge_intel_i855pm_ops = {
CHIP_NAME("intel i855pm Northbridge")
.enable_dev = enable_dev,
};
diff --git a/src/northbridge/intel/i855pm/raminit.c b/src/northbridge/intel/i855pm/raminit.c
index 136e3cb51a..5066f424bf 100644
--- a/src/northbridge/intel/i855pm/raminit.c
+++ b/src/northbridge/intel/i855pm/raminit.c
@@ -1,4 +1,3 @@
-
/* This was originally for the e7500, modified for i855pm
*/
@@ -44,8 +43,8 @@
#define BURST_LENGTH BURST_4
#define BURST_TYPE BURST_INTERLEAVED
#define CAS_LATENCY CAS_2_0
-//#define CAS_LATENCY CAS_2_5
-//#define CAS_LATENCY CAS_1_5
+/*#define CAS_LATENCY CAS_2_5*/
+/*#define CAS_LATENCY CAS_1_5*/
/* WOW! this could be bad! sets casl to 2 without checking! */
#define MRS_VALUE (MODE_NORM | CAS_LATENCY | BURST_TYPE | BURST_LENGTH)
@@ -75,7 +74,7 @@ static inline void do_ram_command (const struct mem_controller *ctrl, uint32_t v
/* %ecx - initial address to read from */
/* Compute the offset */
dword = value >> 16;
- // for(i=0;i<4;i++) {
+ /* for(i=0;i<4;i++) {*/
for(i=0;i<1;i++) {
/* Set the ram command */
byte = pci_read_config8(ctrl->d0, 0x70);
@@ -131,6 +130,8 @@ static inline void ram_mrs(const struct mem_controller *ctrl, uint32_t value){
/* Transform it into the form expected by SDRAM */
dword = ram_cas_latency[(byte>>5) & 1];
#warning RAM_MRS -- using BROKEN hard-wired CAS 2.0. FIX ME SOON
+/*
+ */
value |= (dword<<(16+MD_SHIFT));
value |= (MODE_NORM | BURST_TYPE | BURST_LENGTH) << (16+MD_SHIFT);
@@ -290,8 +291,8 @@ static const long register_values[] = {
* 10 == Write Only (Writes to DRAM, Reads to memory mapped I/O space)
* 11 == Normal (All Access go to DRAM)
*/
- // 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),
- //0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),
+ /* 0x90, 0xcccccf7f, (0x00 << 0) | (0x30 << 8) | (0x33 << 16) | (0x33 << 24),*/
+ /*0x94, 0xcccccccc, (0x33 << 0) | (0x33 << 8) | (0x33 << 16) | (0x33 << 24),*/
/* FIXME why was I attempting to set a reserved bit? */
@@ -373,7 +374,7 @@ static void write_8dwords(uint32_t src_addr, uint32_t dst_addr) {
}
}
-//#define SLOW_DOWN_IO inb(0x80);
+/*#define SLOW_DOWN_IO inb(0x80);*/
#define SLOW_DOWN_IO udelay(40);
@@ -602,58 +603,6 @@ static struct dimm_size spd_get_dimm_size(unsigned device)
print_debug("\r\n");
#endif
goto out;
-#if 0
- value = spd_read_byte(device, 3); /* rows */
- if (value < 0) goto hw_err;
-// if ((value & 0xf) == 0) goto val_err;
- sz.side1 += value & 0xf;
-
- value = spd_read_byte(device, 4); /* columns */
- if (value < 0) goto hw_err;
-// if ((value & 0xf) == 0) goto val_err;
- sz.side1 += value & 0xf;
-
- value = spd_read_byte(device, 17); /* banks */
- if (value < 0) goto hw_err;
-// if ((value & 0xff) == 0) goto val_err;
- value &=0xff;
- sz.side1 += log2(value);
-
- /* Get the module data width and convert it to a power of two */
- value = spd_read_byte(device, 7); /* (high byte) */
- if (value < 0) goto hw_err;
- value &= 0xff;
- value <<= 8;
-
- low = spd_read_byte(device, 6); /* (low byte) */
- if (low < 0) goto hw_err;
- value |= (low & 0xff);
-// if ((value != 72) && (value != 64)) goto val_err;
- sz.side1 += log2(value);
-
- /* side 2 */
- value = spd_read_byte(device, 5); /* number of physical banks */
- if (value < 0) goto hw_err;
- if (value == 1) goto out;
-// if (value != 2) goto val_err;
-
- /* Start with the symmetrical case */
- sz.side2 = sz.side1;
-
- value = spd_read_byte(device, 3); /* rows */
- if (value < 0) goto hw_err;
- if ((value & 0xf0) == 0) goto out; /* If symmetrical we are done */
- sz.side2 -= (value & 0x0f); /* Subtract out rows on side 1 */
- sz.side2 += ((value >> 4) & 0x0f); /* Add in rows on side 2 */
-
- value = spd_read_byte(device, 4); /* columns */
- if (value < 0) goto hw_err;
-// if ((value & 0xff) == 0) goto val_err;
- sz.side2 -= (value & 0x0f); /* Subtract out columns on side 1 */
- sz.side2 += ((value >> 4) & 0x0f); /* Add in columsn on side 2 */
- goto out;
-
-#endif
val_err:
die("Bad SPD value\r\n");
/* If an hw_error occurs report that I have no memory */
@@ -731,7 +680,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_
*/
sz.side1-=14;
- /* Place in the %ebp the dra place holder */ //i
+ /* Place in the %ebp the dra place holder */ /*i*/
word &= ~(7<<i);
word |= sz.side1<<(i<<3);
@@ -747,7 +696,7 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_
/* Convert to the format needed for the DRA register */
sz.side2-=14;
- /* Place in the %ebp the dra place holder */ //i
+ /* Place in the %ebp the dra place holder */ /*i*/
word &= ~(7<<i);
word |= sz.side2<<((i<<3) + 4 );
@@ -762,241 +711,6 @@ static long spd_set_row_attributes(const struct mem_controller *ctrl, long dimm_
return dimm_mask;
}
-#if 0
- /*
- * Routine: sdram_read_paired_byte
- * Arguments: %esp return address
- * %bl device on the smbus to read from
- * %bh address on the smbus to read
- * Results:
- * zf clear
- * byte read in %al
- * On Error:
- * zf set
- * %eax trashed
- *
- * Preserved: %ebx, %esi, %edi
- *
- * Trashed: %eax, %ecx, %edx, %ebp, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %esp, %eflags
- *
- * Effects: Reads two spd bytes from both ram channesl
- * and errors if they are not equal.
- * It then returns the equal result.
- */
-static spd_read_paired_byte () {
- movl %esp, %ebp
- CALLSP(smbus_read_byte)
- setnz %cl
- movb %al, %ch
- addb $(SMBUS_MEM_CHANNEL_OFF), %bl
- CALLSP(smbus_read_byte)
- movb %ch, %ah
- setnz %ch
- subb $(SMBUS_MEM_CHANNEL_OFF), %bl
-
- /* See if dimms on both sides are equally present */
- cmp %cl, %ch
- jne sdram_presence_mismatch
-
- /* Leave if I have no data */
- testb %cl, %cl
- jz spd_verify_byte_out
-
- /* Verify the data is identical */
- cmp %ah, %al
- jne sdram_value_mismatch
-
- /* Clear the zero flag */
- testb %cl, %cl
-spd_verify_byte_out:
- movl %ebp, %esp
- RETSP
-}
-
- /*
- * Routine: spd_verify_dimms
- * Arguments: none
- * Results: none
- * Preserved: none
- * Trashed: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
- * Used: %eax, %ebx, %ecx, %edx, %ebp, %esi, %edi, %esp, %eflags
- *
- * Effects:
- * - Verify all interesting spd information
- * matches for both dimm channels.
- * - Additional error checks that can be easily done
- * here are computed as well, so I don't need to
- * worry about them later.
- */
-static spd_verify_dimms() {
- movl $(SMBUS_MEM_DEVICE_START), %ebx
-spd_verify_dimm:
- /* Verify this is DDR SDRAM */
- movb $2, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_verify_next_dimm
- cmpb $7, %al
- jne invalid_dimm_type
-
- /* Verify the row addresses */
- movb $3, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0x0f, %al
- jz spd_invalid_data
-
- /* Column addresses */
- movb $4, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xf, %al
- jz spd_invalid_data
-
- /* Physical Banks */
- movb $5, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmp $1, %al
- jb spd_invalid_data
- cmp $2, %al
- ja spd_invalid_data
-
- /* Module Data Width */
- movb $7, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmpb $0, %al
- jne spd_invalid_data
-
- movb $6, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- cmpb $64, %al
- je 1f
- cmpb $72, %al
- je 1f
- jmp spd_unsupported_data
-1:
-
- /* Cycle time at highest CAS latency CL=X */
- movb $9, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* SDRAM type */
- movb $11, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* Refresh Interval */
- movb $12, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* SDRAM Width */
- movb $13, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- andb $0x7f, %al
- cmpb $4, %al
- je 1f
- cmpb $8, %al
- je 1f
- jmp spd_unsupported_data
-1:
-
- /* Back-to-Back Random Column Accesses */
- movb $15, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
- cmpb $4, %al
- ja spd_unsupported_data
-
- /* Burst Lengths */
- movb $16, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1<<2), %al
- jz spd_unsupported_data
-
- /* Logical Banks */
- movb $17, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
-
- /* Supported CAS Latencies */
- movb $18, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1 << 1), %al /* CL 1.5 */
- jnz 1f
- testb $(1 << 2), %al /* CL 2.0 */
- jnz 1f
- testb $(1 << 3), %al /* CL 2.5 */
- jnz 1f
- jmp spd_unsupported_data
-1:
-
- /* Cycle time at Cas Latency (CLX - 0.5) */
- movb $23, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* Cycle time at Cas Latency (CLX - 1.0) */
- movb $26, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
- /* tRP Row precharge time */
- movb $27, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xfc, %al
- jz spd_invalid_data
-
-
- /* tRCD RAS to CAS */
- movb $29, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $0xfc, %al
- jz spd_invalid_data
-
- /* tRAS Activate to Precharge */
- movb $30, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb %al, %al
- jz spd_invalid_data
-
- /* Module Bank Density */
- movb $31, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
- testb $(1<<2), %al /* 16MB */
- jnz spd_unsupported_data
- testb $(1<<3), %al
- jnz spd_unsupported_data /* 32MB */
-
- /* Address and Command Hold Time After Clock */
- movb $33, %bh
- CALLSP(spd_read_paired_byte)
- jz spd_missing_data
-
-spd_verify_next_dimm:
- /* go to the next DIMM */
- addb $(SMBUS_MEM_DEVICE_INC), %bl /* increment the smbus device */
- cmpb $SMBUS_MEM_DEVICE_END, %bl
- jbe spd_verify_dimm
-spd_verify_dimms_out:
- RET_LABEL(spd_verify_dimms)
-}
-#endif
#define spd_pre_init "Reading SPD data...\r\n"
#define spd_pre_set "setting based on SPD data...\r\n"
#define spd_post_init "done\r\n"
@@ -1037,9 +751,9 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon
/* Read the inititial state */
dword = pci_read_config32(ctrl->d0, 0x70);
- // WTF?
- //dword |= 0x10000;
-#if 0 // DEBUG_RAM_CONFIG
+ /* WTF? */
+ /*dword |= 0x10000;*/
+#if 0 /* DEBUG_RAM_CONFIG*/
print_debug("spd_detect_dimms: 0x70.l is:");
print_debug_hex32(dword);
print_debug("\r\n");
@@ -1047,13 +761,7 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon
#if 0
/* Test if ECC cmos option is enabled */
- movb $RTC_BOOT_BYTE, %al
- outb %al, $0x70
- inb $0x71, %al
- testb $(1<<2), %al
- jnz 1f
/* Clear the ecc enable */
- andl $~(3 << 20), %esi
1:
#endif
@@ -1087,7 +795,7 @@ static long spd_set_dram_controller_mode (const struct mem_controller *ctrl, lon
if(value < 0 ) continue;
value &= 0x7f;
if(value > MAX_SPD_REFRESH_RATE) { print_err("unsupported refresh rate\r\n");}
-// if(value == 0xff) { print_err("unsupported refresh rate\r\n");}
+/* if(value == 0xff) { print_err("unsupported refresh rate\r\n");}*/
#if DEBUG_RAM_CONFIG
print_debug("spd_detect_dimms: ref rate index:");
@@ -1131,12 +839,11 @@ static long spd_enable_clocks(const struct mem_controller *ctrl, long dimm_mask)
/* Read the inititial state */
dword = pci_read_config32(ctrl->d0, 0x8c);
-#if 0
-# Intel clears top bit here, should we?
-# No the default is on and for normal timming it should be on. Tom Z
+/*
+ Intel clears top bit here, should we?
+ No the default is on and for normal timming it should be on. Tom Z
andl $0x7f, %esi
-#endif
-
+ */
for(i = 0; i < DIMM_SOCKETS; i++) {
if (!(dimm_mask & (1 << i))) {
@@ -1166,8 +873,8 @@ static const uint16_t cas_latency_80[] = {
* Steven James 02/06/2003
*/
-//# .byte 0x05, 0x01, 0x06
-//# .byte 0xb5, 0xb1, 0xb6
+/*# .byte 0x05, 0x01, 0x06 */
+/*# .byte 0xb5, 0xb1, 0xb6 */
0x0, 0x0bb1, 0x0662 /* RCVEN */
};
static const uint16_t cas_latency_80_4dimms[] = {
@@ -1187,7 +894,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas
/* Initially allow cas latencies 2.5, 2.0
* which the chipset supports.
*/
- uint32_t dword = (1<<3)| (1<<2);// esi
+ uint32_t dword = (1<<3)| (1<<2);/* esi*/
uint32_t edi;
uint32_t ecx;
unsigned device;
@@ -1248,7 +955,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas
/* After all of the arduous calculation setup with the fastest
* cas latency I can use.
*/
- value = __builtin_bsf(dword); // bsrl = log2 how about bsfl?
+ value = __builtin_bsf(dword); /* bsrl = log2 how about bsfl?*/
if(value ==0 ) return -1;
ecx = value -1;
@@ -1262,7 +969,7 @@ static long spd_set_cas_latency(const struct mem_controller *ctrl, long dimm_mas
dword |= (1<<26);
/* the rest of the references are words */
-// ecx<<=1; // don't need shift left, because we already define that in u16 array
+/* ecx<<=1; // don't need shift left, because we already define that in u16 array*/
pci_write_config32(ctrl->d0, 0x88, dword);
@@ -1364,14 +1071,14 @@ static long spd_set_dram_timing(const struct mem_controller *ctrl, long dimm_mas
pci_write_config32(ctrl->d0, 0x60, 0x2a004425);
return dimm_mask;
-#if 0
-# Intel clears top bit here, should we?
-# No the default is on and for normal timming it should be on. Tom Z
+/*
+ Intel clears top bit here, should we?
+ No the default is on and for normal timming it should be on. Tom Z
andl $0x7f, %esi
-#endif
+ */
-// HERE. WHat's the frequency kenneth?
+/* HERE. WHat's the frequency kenneth? */
for(i = 0; i < DIMM_SOCKETS; i++) {
if (!(dimm_mask & (1 << i))) {
continue;
@@ -1564,8 +1271,8 @@ static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask)
#if 0
/* For now hardset everything at 128MB boundaries */
/* %ebp has the ram size in multiples of 64MB */
-// cmpl $0, %ebp /* test if there is no mem - smbus went bad */
-// jz no_memory_bad_smbus
+/* cmpl $0, %ebp /* test if there is no mem - smbus went bad */*/
+/* jz no_memory_bad_smbus*/
if(memsz < 0x30) {
/* I should really adjust all of this in C after I have resources
* to all of the pcie devices.
@@ -1603,7 +1310,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
#if DEBUG_RAM_CONFIG
print_debug(spd_pre_init);
#endif
- //activate_spd_rom(ctrl);
+ /*activate_spd_rom(ctrl);*/
dimm_mask = spd_detect_dimms(ctrl);
if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) {
print_debug("No memory for this controller\n");
@@ -1612,7 +1319,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
dimm_mask = spd_enable_clocks(ctrl, dimm_mask);
if (dimm_mask < 0)
goto hw_spd_err;
- //spd_verify_dimms(ctrl);
+ /*spd_verify_dimms(ctrl);*/
#if DEBUG_RAM_CONFIG
print_debug(spd_pre_set);
#endif
@@ -1638,7 +1345,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
#if DEBUG_RAM_CONFIG
print_debug(spd_post_init);
#endif
- //moved from dram_post_init
+ /*moved from dram_post_init*/
spd_set_ram_size(ctrl, dimm_mask);
dump_pci_device(PCI_DEV(0,0,1));
return;
@@ -1663,76 +1370,17 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
* Only 64M of each side of each DIMM is currently mapped,
* so we can handle > 4GB of ram here.
*/
-#if 0
-#define bank_msg "Bank "
-#define side_msg " Side "
-static void verify_ram() {
- xorl %ecx, %ecx
- /* Check to see if the RAM is present,
- * in the specified bank and side.
- */
-1: movl %ecx, %ebx
- shrl $1, %ebx
- addl $((5<<8) | SMBUS_MEM_DEVICE_START), %ebx
- CALLSP(smbus_read_byte)
- jz 5f
- testl $1, %ecx
- jz 2f
- cmpb $2, %al
- jne 5f
-
- /* Display the bank and side we are spot checking.
- */
-2: CONSOLE_INFO_TX_STRING($bank_msg)
- movl %ecx, %ebx
- shrl $1, %ebx
- incl %ebx
- CONSOLE_INFO_TX_HEX8(%bl)
- CONSOLE_INFO_TX_STRING($side_msg)
- movl %ecx, %ebx
- andl $1, %ebx
- CONSOLE_INFO_TX_HEX8(%bl)
-
- /* Compute the memory address to spot check. */
- movl %ecx, %ebx
- xorl %eax, %eax
-3: testl %ebx, %ebx
- jz 4f
- addl $0x04000000, %eax
- decl %ebx
- jmp 3b
-4:
- /* Spot check 512K of RAM */
- movl %eax, %ebx
- addl $0x0007ffff, %ebx
- CALLSP(spot_check)
-5:
- /* Now find the next bank and side to spot check */
- incl %ecx
- cmpl $((SMBUS_MEM_DEVICE_END - SMBUS_MEM_DEVICE_START)<<1), %ecx
- jb 1b
- RET_LABEL(verify_ram)
-
-}
-#endif
-#if 0
static void ram_postinit(const struct mem_controller *ctrl) {
#if DEBUG_RAM_CONFIG
dumpnorth();
#endif
- /* Include a test to verify that memory is more or less working o.k.
- * This test is to catch programming errors and hardware that is out of
- * spec, not a test to see if the memory dimms are working 100%
- */
-//# CALL_LABEL(verify_ram)
- spd_set_ram_size(ctrl);
+ /*spd_set_ram_size(ctrl);*/
}
#define FIRST_NORMAL_REFERENCE() CALL_LABEL(ram_postinit)
#define SPECIAL_FINISHUP() CALL_LABEL(dram_finish)
-#endif
#define ecc_pre_init "Initializing ECC state...\r\n"
#define ecc_post_init "ECC state initialized.\r\n"
@@ -1754,11 +1402,9 @@ static void dram_finish(const struct mem_controller *ctrl)
#endif
#if 0
/* Clear the ECC error bits */
- /*
dword = pci_read_config32(ctrl->d0, 0x7c); /* FCS_EN */
dword |= (1<<17);
pci_write_config32(ctrl->d0, 0x7c, dword);
-*/
#endif
}
@@ -1766,44 +1412,8 @@ static void dram_finish(const struct mem_controller *ctrl)
dumpnorth();
#endif
-// verify_ram();
+/* verify_ram(); */
}
-#if 0
-#define ERRFUNC(x, str) mem_err(x, str)
-
-
-ERRFUNC(invalid_dimm_type, "Invalid dimm type")
-ERRFUNC(spd_missing_data, "Missing sdram spd data")
-ERRFUNC(spd_invalid_data, "Invalid sdram spd data")
-ERRFUNC(spd_unsupported_data, "Unsupported sdram spd value")
-ERRFUNC(unsupported_page_size, "Unsupported page size")
-ERRFUNC(sdram_presence_mismatch, "DIMM presence mismatch")
-ERRFUNC(sdram_value_mismatch, "spd data does not match")
-ERRFUNC(unsupported_refresh_rate, "Unsuported spd refresh rate")
-ERRFUNC(inconsistent_cas_latencies, "No cas latency supported by all dimms")
-ERRFUNC(unsupported_rcd, "Unsupported ras to cas delay")
-#undef ERRFUNC
-
-#define mem_err_err "ERROR: "
-#define mem_err_pair " on dimm pair "
-#define mem_err_byte " spd byte "
-static void mem_err {
- movl %ebx, %edi
- CONSOLE_ERR_TX_STRING($mem_err_err)
- CONSOLE_ERR_TX_STRING(%esi)
- CONSOLE_ERR_TX_STRING($mem_err_pair)
- movl %edi, %ebx
- subb $(SMBUS_MEM_DEVICE_START), %bl
- CONSOLE_ERR_TX_HEX8(%bl)
- CONSOLE_ERR_TX_STRING($mem_err_byte)
- movl %edi, %ebx
- CONSOLE_ERR_TX_HEX8(%bh)
- jmp mem_stop
-
-}
-
-#endif
-
#if ASM_CONSOLE_LOGLEVEL > BIOS_DEBUG
#define ram_enable_1 "Ram Enable 1\r\n"
@@ -1821,10 +1431,24 @@ static void mem_err {
/* Estimate that SLOW_DOWN_IO takes about 50&76us*/
/* delay for 200us */
+void udelay(int usecs)
+{
+ int i;
+ for(i = 0; i < usecs; i++)
+ outb(i&0xff, 0x80);
+}
-#define DO_DELAY \
+
+#if 0
+static void DO_DELAY(void){
udelay(200);
-// for(i=0; i<16;i++) { SLOW_DOWN_IO }
+}
+#endif
+
+#define DO_DELAY udelay(200);
+/*
+ for(i=0; i<16;i++) { SLOW_DOWN_IO }
+ */
#define EXTRA_DELAY DO_DELAY
@@ -1866,11 +1490,13 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
#endif
RAM_NOP(ctrl);
EXTRA_DELAY
+#undef DEBUG_RAM_CONFIG
#define DEBUG_RAM_CONFIG 0
/* 4 Precharge all */
#if DEBUG_RAM_CONFIG
print_debug(ram_enable_4);
#endif
+#undef DEBUG_RAM_CONFIG
#define DEBUG_RAM_CONFIG 0
RAM_PRECHARGE(ctrl);
EXTRA_DELAY
@@ -1947,14 +1573,14 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
RAM_NORMAL(ctrl);
- // special from v1
- //FIRST_NORMAL_REFERENCE();
- //spd_set_ram_size(ctrl, 0x03);
+ /* special from v1*/
+ /*FIRST_NORMAL_REFERENCE();*/
+ /*spd_set_ram_size(ctrl, 0x03);*/
/* Finally enable refresh */
ENABLE_REFRESH(ctrl);
- //SPECIAL_FINISHUP();
+ /*SPECIAL_FINISHUP();*/
dram_finish(ctrl);
{ char *c = (char *) 0;
*c = 'a';
diff --git a/targets/digitallogic/adl855pc/Config.lb b/targets/digitallogic/adl855pc/Config.lb
index 58d1bcf8f2..9d3c551461 100644
--- a/targets/digitallogic/adl855pc/Config.lb
+++ b/targets/digitallogic/adl855pc/Config.lb
@@ -1,96 +1,13 @@
# Sample config file for adl855pc
# This will make a target directory of ./adl855pc
-loadoptions
-
target adl855pc
+mainboard digitallogic/adl855pc
-uses ARCH
-uses CONFIG_COMPRESS
-uses CONFIG_IOAPIC
-uses CONFIG_ROM_STREAM
-uses CONFIG_ROM_STREAM_START
-uses CONFIG_UDELAY_TSC
-uses CPU_FIXUP
-uses FALLBACK_SIZE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses HAVE_HARD_RESET
-uses i586
-uses i686
-uses INTEL_PPRO_MTRR
-uses HEAP_SIZE
-uses IRQ_SLOT_COUNT
-uses MAINBOARD_PART_NUMBER
-uses MAINBOARD_VENDOR
-uses CONFIG_SMP
-uses CONFIG_MAX_CPUS
-uses MEMORY_HOLE
-uses PAYLOAD_SIZE
-uses _RAMBASE
-uses _ROMBASE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_OFFSET
-uses ROM_SECTION_SIZE
-uses ROM_SIZE
-uses STACK_SIZE
-uses USE_FALLBACK_IMAGE
-uses USE_OPTION_TABLE
-uses HAVE_OPTION_TABLE
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses MAINBOARD
-uses CONFIG_CHIP_CONFIGURE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses LINUXBIOS_EXTRA_VERSION
-uses TTYS0_BAUD
-
-option TTYS0_BAUD=115200
-
-option CONFIG_CHIP_CONFIGURE=1
-
-option MAXIMUM_CONSOLE_LOGLEVEL=9
-option DEFAULT_CONSOLE_LOGLEVEL=9
-option CONFIG_CONSOLE_SERIAL8250=1
-
-option CPU_FIXUP=1
-option CONFIG_UDELAY_TSC=0
-option i686=1
-option i586=1
-option INTEL_PPRO_MTRR=1
-option ROM_SIZE=1024*1024
-
-option HAVE_OPTION_TABLE=1
-option CONFIG_ROM_STREAM=1
-option HAVE_FALLBACK_BOOT=1
-
-###
-### Compute the location and size of where this firmware image
-### (linuxBIOS plus bootloader) will live in the boot rom chip.
-###
-option FALLBACK_SIZE=131072
-
-## LinuxBIOS C code runs at this location in RAM
-option _RAMBASE=0x00004000
-
-#
-###
-### Compute the start location and size size of
-### The linuxBIOS bootloader.
-###
-
-#
romimage "normal"
option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal"
- mainboard digitallogic/adl855pc
-# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-# payload ../../../../tg3--ide_disk.zelf
-# payload ../../../../../lnxieepro100.ebi
payload /etc/hosts
end
@@ -98,10 +15,6 @@ romimage "fallback"
option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback"
- mainboard digitallogic/adl855pc
-# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-# payload ../../../../tg3--ide_disk.zelf
-# payload ../../../../../lnxieepro100.ebi
payload /etc/hosts
end