summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMatt DeVillier <matt.devillier@gmail.com>2020-03-30 02:11:24 -0500
committerPatrick Georgi <pgeorgi@google.com>2020-03-31 10:34:42 +0000
commit61ba3ac92e832259acd831ab6fab2946f57c7035 (patch)
treeb6351d96549e9d6bace8cde0c89dbdbf2e9dd744
parent98f609aad4b6d6b6a09efaa011a1f02116935acd (diff)
downloadcoreboot-61ba3ac92e832259acd831ab6fab2946f57c7035.tar.xz
mb/google/slippy: Convert variants to use override devicetree
Since the variants' devicetrees are almost identical, convert to using an overridetree setup for simplicity. Test: build all slippy variants, compare generated static.c to ensure resulting generated contents unchanged (although layout will) Change-Id: If237fad38a1bccfb8e51edfae3ecb75d05ade240 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
-rw-r--r--src/mainboard/google/slippy/Kconfig4
-rw-r--r--src/mainboard/google/slippy/devicetree.cb (renamed from src/mainboard/google/slippy/variants/falco/devicetree.cb)11
-rw-r--r--src/mainboard/google/slippy/variants/falco/overridetree.cb19
-rw-r--r--src/mainboard/google/slippy/variants/leon/devicetree.cb158
-rw-r--r--src/mainboard/google/slippy/variants/leon/overridetree.cb54
-rw-r--r--src/mainboard/google/slippy/variants/peppy/devicetree.cb130
-rw-r--r--src/mainboard/google/slippy/variants/peppy/overridetree.cb23
-rw-r--r--src/mainboard/google/slippy/variants/wolf/devicetree.cb131
-rw-r--r--src/mainboard/google/slippy/variants/wolf/overridetree.cb25
9 files changed, 123 insertions, 432 deletions
diff --git a/src/mainboard/google/slippy/Kconfig b/src/mainboard/google/slippy/Kconfig
index 94ade7a546..21659ab675 100644
--- a/src/mainboard/google/slippy/Kconfig
+++ b/src/mainboard/google/slippy/Kconfig
@@ -48,9 +48,9 @@ config MAINBOARD_FAMILY
string
default "Google_Slippy"
-config DEVICETREE
+config OVERRIDE_DEVICETREE
string
- default "variants/$(CONFIG_VARIANT_DIR)/devicetree.cb"
+ default "variants/$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAX_CPUS
int
diff --git a/src/mainboard/google/slippy/variants/falco/devicetree.cb b/src/mainboard/google/slippy/devicetree.cb
index 887ec4afcb..3d98d745a3 100644
--- a/src/mainboard/google/slippy/variants/falco/devicetree.cb
+++ b/src/mainboard/google/slippy/devicetree.cb
@@ -14,14 +14,6 @@ chip northbridge/intel/haswell
# Set backlight PWM value for eDP
register "gpu_pch_backlight_pwm_hz" = "200"
- # Enable Panel and configure power delays
- register "gpu_panel_port_select" = "1" # eDP
- register "gpu_panel_power_cycle_delay" = "5" # 400ms (T4)
- register "gpu_panel_power_up_delay" = "600" # 60ms (T1+T2)
- register "gpu_panel_power_down_delay" = "600" # 60ms (T3+T7)
- register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms (T5)
- register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms (T6)
-
device cpu_cluster 0 on
chip cpu/intel/haswell
device lapic 0 on end
@@ -79,9 +71,6 @@ chip northbridge/intel/haswell
# Route all USB ports to XHCI per default
register "xhci_default" = "1"
- # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP
- register "icc_clock_disable" = "0x013e0000"
-
device pci 13.0 off end # Smart Sound Audio DSP
device pci 14.0 on end # USB3 XHCI
device pci 15.0 on end # Serial I/O DMA
diff --git a/src/mainboard/google/slippy/variants/falco/overridetree.cb b/src/mainboard/google/slippy/variants/falco/overridetree.cb
new file mode 100644
index 0000000000..c163202e99
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/falco/overridetree.cb
@@ -0,0 +1,19 @@
+chip northbridge/intel/haswell
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms (T4)
+ register "gpu_panel_power_up_delay" = "600" # 60ms (T1+T2)
+ register "gpu_panel_power_down_delay" = "600" # 60ms (T3+T7)
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms (T5)
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms (T6)
+
+ device domain 0 on
+
+ chip southbridge/intel/lynxpoint
+
+ # Disable PCIe CLKOUT 1-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013e0000"
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/leon/devicetree.cb b/src/mainboard/google/slippy/variants/leon/devicetree.cb
deleted file mode 100644
index 27ce945dc5..0000000000
--- a/src/mainboard/google/slippy/variants/leon/devicetree.cb
+++ /dev/null
@@ -1,158 +0,0 @@
-chip northbridge/intel/haswell
- # IGD Displays
- register "gfx" = "GMA_STATIC_DISPLAYS(0)"
-
- # Enable eDP Hotplug with 6ms pulse
- register "gpu_dp_d_hotplug" = "0x06"
-
- # Disable DisplayPort C Hotplug
- register "gpu_dp_c_hotplug" = "0x00"
-
- # Enable HDMI Hotplug with 6ms pulse
- register "gpu_dp_b_hotplug" = "0x06"
-
- # Set backlight PWM value for eDP
- register "gpu_pch_backlight_pwm_hz" = "200"
-
- # Enable Panel and configure power delays
- register "gpu_panel_port_select" = "1" # eDP
- register "gpu_panel_power_cycle_delay" = "5" # 400ms
- register "gpu_panel_power_up_delay" = "400" # 40ms
- register "gpu_panel_power_down_delay" = "150" # 15ms
- register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
- register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
-
- device cpu_cluster 0 on
- chip cpu/intel/haswell
- device lapic 0 on end
- # Magic APIC ID to locate this chip
- device lapic 0xACAC off end
-
- register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
-
- register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
- end
- end
-
- device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # vga controller
- device pci 03.0 on end # mini-hd audio
-
- chip southbridge/intel/lynxpoint
- register "pirqa_routing" = "0x8b"
- register "pirqb_routing" = "0x8a"
- register "pirqc_routing" = "0x8b"
- register "pirqd_routing" = "0x8b"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x80"
-
- # EC range is 0x800-0x9ff
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x00fc0901"
-
- # EC_SMI is GPIO34
- register "alt_gp_smi_en" = "0x0004"
- register "gpe0_en_1" = "0x00000000"
- # EC_SCI is GPIO36
- register "gpe0_en_2" = "0x00000010"
- register "gpe0_en_3" = "0x00000000"
- register "gpe0_en_4" = "0x00000000"
-
- register "ide_legacy_combined" = "0x0"
- register "sata_ahci" = "0x1"
- register "sata_port_map" = "0x1"
- register "sata_devslp_disable" = "0x1"
-
- # DTLE DATA / EDGE values
- register "sata_port0_gen3_dtle" = "0x5"
- register "sata_port1_gen3_dtle" = "0x5"
-
- register "sio_acpi_mode" = "1"
- register "sio_i2c0_voltage" = "0" # 3.3V
- register "sio_i2c1_voltage" = "0" # 3.3V
-
- # Force enable ASPM for PCIe Port 1
- register "pcie_port_force_aspm" = "0x01"
-
- # Route all USB ports to XHCI per default
- register "xhci_default" = "1"
-
- # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
- register "icc_clock_disable" = "0x013c0000"
-
- device pci 13.0 off end # Smart Sound Audio DSP
- device pci 14.0 on end # USB3 XHCI
- device pci 15.0 on end # Serial I/O DMA
- device pci 15.1 on end # I2C0
- device pci 15.2 on end # I2C1
- device pci 15.3 off end # GSPI0
- device pci 15.4 off end # GSPI1
- device pci 15.5 off end # UART0
- device pci 15.6 off end # UART1
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT
- device pci 17.0 off end # SDIO
- device pci 19.0 off end # GbE
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe Port #1
- device pci 1c.1 off end # PCIe Port #2
- device pci 1c.2 off end # PCIe Port #3
- device pci 1c.3 off end # PCIe Port #4
- device pci 1c.4 off end # PCIe Port #5
- device pci 1c.5 off end # PCIe Port #6
- device pci 1d.0 on end # USB2 EHCI
- device pci 1e.0 off end # PCI bridge
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- # We only have one init function that
- # we need to call to initialize the
- # keyboard part of the EC.
- device pnp ff.1 on # dummy address
- end
- end
- end # LPC bridge
- device pci 1f.2 on end # SATA Controller
- device pci 1f.3 on # SMBus
- chip drivers/i2c/rtd2132
- # Panel Power Timings (1 ms units)
- # Note: the panel Tx timings are very
- # different from the LVDS bridge
- # Tx timing settings. Below is a mapping
- # for RTD2132 -> Panel timings.
- # T1 = T2
- # T2 = T8 + T10 + T12
- # T3 = T14
- # T4 = T15
- # T5 = T9 + T11 + T13
- # T6 = T3
- # T7 = T4
- register "t1" = "0x14"
- register "t2" = "0xdc"
- register "t3" = "0x0e"
- register "t4" = "0x02"
- register "t5" = "0xdc"
- register "t6" = "0x14"
- register "t7" = "0x208"
- # LVDS Swap settings are normal.
- register "lvds_swap" = "0"
- # Enable Spread Sprectrum at 0.5%
- register "sscg_percent" = "0x05"
- device i2c 35 on end # (8bit address: 0x6A)
- end # rtd2132
- end # SMBus
- device pci 1f.6 on end # Thermal
- end
- end
-end
diff --git a/src/mainboard/google/slippy/variants/leon/overridetree.cb b/src/mainboard/google/slippy/variants/leon/overridetree.cb
new file mode 100644
index 0000000000..f3b5c4a257
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/leon/overridetree.cb
@@ -0,0 +1,54 @@
+chip northbridge/intel/haswell
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms
+ register "gpu_panel_power_up_delay" = "400" # 40ms
+ register "gpu_panel_power_down_delay" = "150" # 15ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
+
+ device domain 0 on
+
+ chip southbridge/intel/lynxpoint
+
+ register "sata_devslp_disable" = "0x1"
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+
+ device pci 1f.3 on # SMBus
+ chip drivers/i2c/rtd2132
+ # Panel Power Timings (1 ms units)
+ # Note: the panel Tx timings are very
+ # different from the LVDS bridge
+ # Tx timing settings. Below is a mapping
+ # for RTD2132 -> Panel timings.
+ # T1 = T2
+ # T2 = T8 + T10 + T12
+ # T3 = T14
+ # T4 = T15
+ # T5 = T9 + T11 + T13
+ # T6 = T3
+ # T7 = T4
+ register "t1" = "0x14"
+ register "t2" = "0xdc"
+ register "t3" = "0x0e"
+ register "t4" = "0x02"
+ register "t5" = "0xdc"
+ register "t6" = "0x14"
+ register "t7" = "0x208"
+ # LVDS Swap settings are normal.
+ register "lvds_swap" = "0"
+ # Enable Spread Sprectrum at 0.5%
+ register "sscg_percent" = "0x05"
+ device i2c 35 on end # (8bit address: 0x6A)
+ end # rtd2132
+ end # SMBus
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/peppy/devicetree.cb b/src/mainboard/google/slippy/variants/peppy/devicetree.cb
deleted file mode 100644
index d5e797e88d..0000000000
--- a/src/mainboard/google/slippy/variants/peppy/devicetree.cb
+++ /dev/null
@@ -1,130 +0,0 @@
-chip northbridge/intel/haswell
- # IGD Displays
- register "gfx" = "GMA_STATIC_DISPLAYS(0)"
-
- # Enable eDP Hotplug with 6ms pulse
- register "gpu_dp_d_hotplug" = "0x06"
-
- # Disable DisplayPort C Hotplug
- register "gpu_dp_c_hotplug" = "0x00"
-
- # Enable HDMI Hotplug with 6ms pulse
- register "gpu_dp_b_hotplug" = "0x06"
-
- # Set backlight PWM value for eDP
- register "gpu_pch_backlight_pwm_hz" = "200"
-
- # Enable Panel and configure power delays
- register "gpu_panel_port_select" = "1" # eDP
- register "gpu_panel_power_cycle_delay" = "5" # 400ms
- register "gpu_panel_power_up_delay" = "400" # 40ms
- register "gpu_panel_power_down_delay" = "150" # 15ms
- register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
- register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
-
- device cpu_cluster 0 on
- chip cpu/intel/haswell
- device lapic 0 on end
- # Magic APIC ID to locate this chip
- device lapic 0xACAC off end
-
- register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
-
- register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
- end
- end
-
- device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # vga controller
- device pci 03.0 on end # mini-hd audio
-
- chip southbridge/intel/lynxpoint
- register "pirqa_routing" = "0x8b"
- register "pirqb_routing" = "0x8a"
- register "pirqc_routing" = "0x8b"
- register "pirqd_routing" = "0x8b"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x80"
-
- # EC range is 0x800-0x9ff
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x00fc0901"
-
- # EC_SMI is GPIO34
- register "alt_gp_smi_en" = "0x0004"
- register "gpe0_en_1" = "0x00000000"
- # EC_SCI is GPIO36
- register "gpe0_en_2" = "0x00000010"
- register "gpe0_en_3" = "0x00000000"
- register "gpe0_en_4" = "0x00000000"
-
- register "ide_legacy_combined" = "0x0"
- register "sata_ahci" = "0x1"
- register "sata_port_map" = "0x1"
-
- # DTLE DATA / EDGE values
- register "sata_port0_gen3_dtle" = "0x5"
- register "sata_port1_gen3_dtle" = "0x5"
-
- register "sio_acpi_mode" = "1"
- register "sio_i2c0_voltage" = "0" # 3.3V
- register "sio_i2c1_voltage" = "0" # 3.3V
-
- # Force enable ASPM for PCIe Port1
- register "pcie_port_force_aspm" = "0x01"
-
- # Route all USB ports to XHCI per default
- register "xhci_default" = "1"
-
- # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
- register "icc_clock_disable" = "0x013c0000"
-
- device pci 13.0 off end # Smart Sound Audio DSP
- device pci 14.0 on end # USB3 XHCI
- device pci 15.0 on end # Serial I/O DMA
- device pci 15.1 on end # I2C0
- device pci 15.2 on end # I2C1
- device pci 15.3 off end # GSPI0
- device pci 15.4 off end # GSPI1
- device pci 15.5 off end # UART0
- device pci 15.6 off end # UART1
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT
- device pci 17.0 off end # SDIO
- device pci 19.0 off end # GbE
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe Port #1
- device pci 1c.1 off end # PCIe Port #2
- device pci 1c.2 off end # PCIe Port #3
- device pci 1c.3 off end # PCIe Port #4
- device pci 1c.4 off end # PCIe Port #5
- device pci 1c.5 off end # PCIe Port #6
- device pci 1d.0 on end # USB2 EHCI
- device pci 1e.0 off end # PCI bridge
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- # We only have one init function that
- # we need to call to initialize the
- # keyboard part of the EC.
- device pnp ff.1 on # dummy address
- end
- end
- end # LPC bridge
- device pci 1f.2 on end # SATA Controller
- device pci 1f.3 on end # SMBus
- device pci 1f.6 on end # Thermal
- end
- end
-end
diff --git a/src/mainboard/google/slippy/variants/peppy/overridetree.cb b/src/mainboard/google/slippy/variants/peppy/overridetree.cb
new file mode 100644
index 0000000000..cd6a0df9ad
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/peppy/overridetree.cb
@@ -0,0 +1,23 @@
+chip northbridge/intel/haswell
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "5" # 400ms
+ register "gpu_panel_power_up_delay" = "400" # 40ms
+ register "gpu_panel_power_down_delay" = "150" # 15ms
+ register "gpu_panel_power_backlight_on_delay" = "2100" # 210ms
+ register "gpu_panel_power_backlight_off_delay" = "2100" # 210ms
+
+ device domain 0 on
+
+ chip southbridge/intel/lynxpoint
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+ end
+ end
+end
diff --git a/src/mainboard/google/slippy/variants/wolf/devicetree.cb b/src/mainboard/google/slippy/variants/wolf/devicetree.cb
deleted file mode 100644
index ee0accaf2e..0000000000
--- a/src/mainboard/google/slippy/variants/wolf/devicetree.cb
+++ /dev/null
@@ -1,131 +0,0 @@
-chip northbridge/intel/haswell
- # IGD Displays
- register "gfx" = "GMA_STATIC_DISPLAYS(0)"
-
- # Enable eDP Hotplug with 6ms pulse
- register "gpu_dp_d_hotplug" = "0x06"
-
- # Disable DisplayPort C Hotplug
- register "gpu_dp_c_hotplug" = "0x00"
-
- # Enable HDMI Hotplug with 6ms pulse
- register "gpu_dp_b_hotplug" = "0x06"
-
- # Set backlight PWM value for eDP
- register "gpu_pch_backlight_pwm_hz" = "200"
-
- # Enable Panel and configure power delays
- register "gpu_panel_port_select" = "1" # eDP
- register "gpu_panel_power_cycle_delay" = "6" # 500ms (T11+T12)
- register "gpu_panel_power_up_delay" = "2000" # 200ms (T3)
- register "gpu_panel_power_down_delay" = "500" # 50ms (T10)
- register "gpu_panel_power_backlight_on_delay" = "10" # 1ms (T8)
- register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms (T9)
-
- device cpu_cluster 0 on
- chip cpu/intel/haswell
- device lapic 0 on end
- # Magic APIC ID to locate this chip
- device lapic 0xACAC off end
-
- register "c1_battery" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_battery" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_battery" = "9" # ACPI(C3) = MWAIT(C7S)
-
- register "c1_acpower" = "2" # ACPI(C1) = MWAIT(C1E)
- register "c2_acpower" = "3" # ACPI(C2) = MWAIT(C3)
- register "c3_acpower" = "9" # ACPI(C3) = MWAIT(C7S)
- end
- end
-
- device domain 0 on
- device pci 00.0 on end # host bridge
- device pci 02.0 on end # vga controller
- device pci 03.0 on end # mini-hd audio
-
- chip southbridge/intel/lynxpoint
- register "pirqa_routing" = "0x8b"
- register "pirqb_routing" = "0x8a"
- register "pirqc_routing" = "0x8b"
- register "pirqd_routing" = "0x8b"
- register "pirqe_routing" = "0x80"
- register "pirqf_routing" = "0x80"
- register "pirqg_routing" = "0x80"
- register "pirqh_routing" = "0x80"
-
- # EC range is 0x800-0x9ff
- register "gen1_dec" = "0x00fc0801"
- register "gen2_dec" = "0x00fc0901"
-
- # EC_SMI is GPIO34
- register "alt_gp_smi_en" = "0x0004"
- register "gpe0_en_1" = "0x00000000"
- # EC_SCI is GPIO36
- register "gpe0_en_2" = "0x00000010"
- register "gpe0_en_3" = "0x00000000"
- register "gpe0_en_4" = "0x00000000"
-
- register "ide_legacy_combined" = "0x0"
- register "sata_ahci" = "0x1"
- register "sata_port_map" = "0x1"
- register "sata_devslp_disable" = "0x1"
-
- # DTLE DATA / EDGE values
- register "sata_port0_gen3_dtle" = "0x5"
- register "sata_port1_gen3_dtle" = "0x5"
-
- register "sio_acpi_mode" = "1"
- register "sio_i2c0_voltage" = "0" # 3.3V
- register "sio_i2c1_voltage" = "0" # 3.3V
-
- # Force enable ASPM for PCIe Port 1
- register "pcie_port_force_aspm" = "0x01"
-
- # Route all USB ports to XHCI per default
- register "xhci_default" = "1"
-
- # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
- register "icc_clock_disable" = "0x013c0000"
-
- device pci 13.0 off end # Smart Sound Audio DSP
- device pci 14.0 on end # USB3 XHCI
- device pci 15.0 on end # Serial I/O DMA
- device pci 15.1 on end # I2C0
- device pci 15.2 on end # I2C1
- device pci 15.3 off end # GSPI0
- device pci 15.4 off end # GSPI1
- device pci 15.5 off end # UART0
- device pci 15.6 off end # UART1
- device pci 16.0 on end # Management Engine Interface 1
- device pci 16.1 off end # Management Engine Interface 2
- device pci 16.2 off end # Management Engine IDE-R
- device pci 16.3 off end # Management Engine KT
- device pci 17.0 off end # SDIO
- device pci 19.0 off end # GbE
- device pci 1b.0 on end # High Definition Audio
- device pci 1c.0 on end # PCIe Port #1
- device pci 1c.1 off end # PCIe Port #2
- device pci 1c.2 off end # PCIe Port #3
- device pci 1c.3 off end # PCIe Port #4
- device pci 1c.4 off end # PCIe Port #5
- device pci 1c.5 off end # PCIe Port #6
- device pci 1d.0 on end # USB2 EHCI
- device pci 1e.0 off end # PCI bridge
- device pci 1f.0 on
- chip drivers/pc80/tpm
- device pnp 0c31.0 on end
- end
- chip ec/google/chromeec
- # We only have one init function that
- # we need to call to initialize the
- # keyboard part of the EC.
- device pnp ff.1 on # dummy address
- end
- end
- end # LPC bridge
- device pci 1f.2 on end # SATA Controller
- device pci 1f.3 on end # SMBus
- device pci 1f.6 on end # Thermal
- end
- end
-end
diff --git a/src/mainboard/google/slippy/variants/wolf/overridetree.cb b/src/mainboard/google/slippy/variants/wolf/overridetree.cb
new file mode 100644
index 0000000000..5ccca1d821
--- /dev/null
+++ b/src/mainboard/google/slippy/variants/wolf/overridetree.cb
@@ -0,0 +1,25 @@
+chip northbridge/intel/haswell
+
+ # Enable Panel and configure power delays
+ register "gpu_panel_port_select" = "1" # eDP
+ register "gpu_panel_power_cycle_delay" = "6" # 500ms (T11+T12)
+ register "gpu_panel_power_up_delay" = "2000" # 200ms (T3)
+ register "gpu_panel_power_down_delay" = "500" # 50ms (T10)
+ register "gpu_panel_power_backlight_on_delay" = "10" # 1ms (T8)
+ register "gpu_panel_power_backlight_off_delay" = "2000" # 200ms (T9)
+
+ device domain 0 on
+
+ chip southbridge/intel/lynxpoint
+
+ register "sata_devslp_disable" = "0x1"
+
+ # DTLE DATA / EDGE values
+ register "sata_port0_gen3_dtle" = "0x5"
+ register "sata_port1_gen3_dtle" = "0x5"
+
+ # Disable PCIe CLKOUT 2-5 and CLKOUT_XDP
+ register "icc_clock_disable" = "0x013c0000"
+ end
+ end
+end