drivers/crb: Add CRB driver for TPM2 support

Add the Command Response Buffer which is defined in the TPM 2.0 Specs.
CRB can be specified with MAINBOARD_HAS_CRB_TPM, even though it is
actually SoC/SB specific.

Change-Id: I477e45963fe3cdbc02cda9ae99c19142747e4b46
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34106
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>

7 files changed, 546 insertions, 2 deletions

diff --git a/src/drivers/crb/Kconfig b/src/drivers/crb/Kconfig
new file mode 100644
index 0000000000..bfd8be06d6
--- /dev/null
+++ b/src/drivers/crb/Kconfig
@@ -0,0 +1,17 @@
+config CRB_TPM
+	bool
+	help
+	  CRB TPM driver is enabled!
+
+config CRB_TPM_BASE_ADDRESS
+	hex
+	default 0xfed40000
+	help
+	  Base Address of the CRB TPM Command Structure
+
+config MAINBOARD_HAS_CRB_TPM
+	bool
+	default n
+	select CRB_TPM
+	help
+	  Mainboard has Command Response Buffer support
diff --git a/src/drivers/crb/Makefile.inc b/src/drivers/crb/Makefile.inc
new file mode 100644
index 0000000000..3f12b36923
--- /dev/null
+++ b/src/drivers/crb/Makefile.inc
@@ -0,0 +1,5 @@
+bootblock-$(CONFIG_CRB_TPM) += tis.c tpm.c
+verstage-$(CONFIG_CRB_TPM) += tis.c tpm.c
+romstage-$(CONFIG_CRB_TPM) += tis.c tpm.c
+ramstage-$(CONFIG_CRB_TPM) += tis.c tpm.c
+postcar-$(CONFIG_CRB_TPM) += tis.c tpm.c
diff --git a/src/drivers/crb/chip.h b/src/drivers/crb/chip.h
new file mode 100644
index 0000000000..8e74a68f97
--- /dev/null
+++ b/src/drivers/crb/chip.h
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2014 Google Inc.  All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef DRIVERS_CRB_CHIP_H
+#define DRIVERS_CRB_CHIP_H
+
+typedef struct drivers_crb_config {
+} tpm_config_t;
+
+#endif /* DRIVERS_CRB_CHIP_H */
diff --git a/src/drivers/crb/tis.c b/src/drivers/crb/tis.c
new file mode 100644
index 0000000000..c110151766
--- /dev/null
+++ b/src/drivers/crb/tis.c
@@ -0,0 +1,150 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/early_variables.h>
+#include <console/console.h>
+#include <security/tpm/tis.h>
+#include <arch/acpigen.h>
+#include <device/device.h>
+
+#include "tpm.h"
+#include "chip.h"
+
+static unsigned tpm_is_open CAR_GLOBAL;
+
+static const struct {
+	uint16_t vid;
+	uint16_t did;
+	const char *device_name;
+} dev_map[] = {
+	{0x1ae0, 0x0028, "CR50"},
+	{0xa13a, 0x8086, "Intel iTPM"}
+};
+
+static const char *tis_get_dev_name(struct tpm2_info *info)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(dev_map); i++)
+		if ((dev_map[i].vid == info->vendor_id) && (dev_map[i].did == info->device_id))
+			return dev_map[i].device_name;
+	return "Unknown";
+}
+
+
+int tis_open(void)
+{
+	if (car_get_var(tpm_is_open)) {
+		printk(BIOS_ERR, "%s called twice.\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+int tis_close(void)
+{
+	if (car_get_var(tpm_is_open)) {
+
+		/*
+		 * Do we need to do something here, like waiting for a
+		 * transaction to stop?
+		 */
+		car_set_var(tpm_is_open, 0);
+	}
+
+	return 0;
+}
+
+int tis_init(void)
+{
+	struct tpm2_info info;
+
+	// Wake TPM up (if necessary)
+	if (tpm2_init() != 0)
+		return -1;
+
+	tpm2_get_info(&info);
+
+	printk(BIOS_INFO, "Initialized TPM device %s revision %d\n", tis_get_dev_name(&info),
+	       info.revision);
+
+	return 0;
+}
+
+
+int tis_sendrecv(const uint8_t *sendbuf, size_t sbuf_size, uint8_t *recvbuf, size_t *rbuf_len)
+{
+	int len = tpm2_process_command(sendbuf, sbuf_size, recvbuf, *rbuf_len);
+
+	if (len == 0)
+		return -1;
+
+	*rbuf_len = len;
+
+	return 0;
+}
+
+#ifdef __RAMSTAGE__
+
+static void crb_tpm_fill_ssdt(struct device *dev)
+{
+	const char *path = acpi_device_path(dev);
+	if (!path) {
+		path = "\\_SB_.TPM";
+		printk(BIOS_DEBUG, "Using default TPM2 ACPI path: '%s'\n", path);
+	}
+
+	/* Device */
+	acpigen_write_device(path);
+
+	acpigen_write_name_string("_HID", "MSFT0101");
+	acpigen_write_name_string("_CID", "MSFT0101");
+
+	acpigen_write_name_integer("_UID", 1);
+
+	acpigen_write_STA(ACPI_STATUS_DEVICE_ALL_ON);
+
+	/* Resources */
+	acpigen_write_name("_CRS");
+	acpigen_write_resourcetemplate_header();
+	acpigen_write_mem32fixed(1, TPM_CRB_BASE_ADDRESS, 0x5000);
+
+	acpigen_write_resourcetemplate_footer();
+
+	acpigen_pop_len(); /* Device */
+}
+
+static const char *crb_tpm_acpi_name(const struct device *dev)
+{
+	return "TPM";
+}
+
+static struct device_operations crb_ops = {
+	.read_resources = DEVICE_NOOP,
+	.set_resources = DEVICE_NOOP,
+#if CONFIG(HAVE_ACPI_TABLES)
+	.acpi_name = crb_tpm_acpi_name,
+	.acpi_fill_ssdt_generator = crb_tpm_fill_ssdt,
+#endif
+
+};
+
+static void enable_dev(struct device *dev)
+{
+	dev->ops = &crb_ops;
+}
+
+struct chip_operations drivers_crb_ops = {CHIP_NAME("CRB TPM").enable_dev = enable_dev};
+
+#endif /* __RAMSTAGE__ */
diff --git a/src/drivers/crb/tpm.c b/src/drivers/crb/tpm.c
new file mode 100644
index 0000000000..0393417e74
--- /dev/null
+++ b/src/drivers/crb/tpm.c
@@ -0,0 +1,280 @@
+/*.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * This is a driver for a CRB Interface.
+ *
+ * The general flow looks like this:
+ *
+ * TPM starts in IDLE Mode
+ *
+ *   IDLE  --> READY --> Command Receiption
+ *    ^	                        |
+ *    |	                        v
+      -- Cmd Complete <-- Command Execution
+ */
+
+#include <timer.h>
+#include <arch/early_variables.h>
+#include <console/console.h>
+#include <arch/mmio.h>
+#include <delay.h>
+#include <string.h>
+#include <endian.h>
+#include <soc/pci_devs.h>
+#include <device/pci_ops.h>
+
+#include "tpm.h"
+
+static struct control_area {
+	uint32_t request;
+	uint32_t status;
+	uint32_t cancel;
+	uint32_t start;
+	uint64_t interrupt_control;
+	uint32_t command_size;
+	void *command_bfr;
+	uint32_t response_size;
+	void *response_bfr;
+} control_area;
+
+static uint8_t cur_loc = 0;
+
+/* Read Control Area Structure back  */
+static void crb_readControlArea(void)
+{
+	control_area.request = read32(CRB_REG(cur_loc, CRB_REG_REQUEST));
+	control_area.status = read32(CRB_REG(cur_loc, CRB_REG_STATUS));
+	control_area.cancel = read32(CRB_REG(cur_loc, CRB_REG_CANCEL));
+	control_area.interrupt_control = read64(CRB_REG(cur_loc, CRB_REG_INT_CTRL));
+	control_area.command_size = read32(CRB_REG(cur_loc, CRB_REG_CMD_SIZE));
+	control_area.command_bfr = (void *)(uint32_t)read64(CRB_REG(cur_loc, CRB_REG_CMD_ADDR));
+	control_area.response_size = read32(CRB_REG(cur_loc, CRB_REG_RESP_SIZE));
+	control_area.response_bfr =
+		(void *)(uint32_t)read64(CRB_REG(cur_loc, CRB_REG_RESP_ADDR));
+}
+
+/* Wait for Reg to be expected Value  */
+static int crb_wait_for_reg32(const void *addr, uint32_t timeoutMs, uint32_t mask,
+			      uint32_t expectedValue)
+{
+	uint32_t regValue;
+	struct stopwatch sw;
+
+	// Set up a timer which breaks the loop after timeout
+	stopwatch_init_msecs_expire(&sw, timeoutMs);
+
+	while (1) {
+		// Now check if the TPM is in IDLE mode
+		regValue = read32(addr);
+
+		if ((regValue & mask) == expectedValue)
+			return 0;
+
+		if (stopwatch_expired(&sw)) {
+			printk(BIOS_ERR,
+			       "CRB_WAIT: Error - Returning Zero with RegValue: %08x, Mask: %08x, Expected: %08x\n",
+			       regValue, mask, expectedValue);
+			return -1;
+		}
+	}
+}
+
+/* CRB PROBE
+ *
+ * Checks if the CRB Interface is ready
+ */
+static int crb_probe(void)
+{
+	uint64_t tpmStatus = read64(CRB_REG(cur_loc, CRB_REG_INTF_ID));
+	printk(BIOS_SPEW, "Interface ID Reg. %llx\n", tpmStatus);
+
+	if ((tpmStatus & CRB_INTF_REG_CAP_CRB) == 0) {
+		printk(BIOS_DEBUG, "TPM: CRB Interface is not supported.\n");
+		return -1;
+	}
+
+	if ((tpmStatus & (0xf)) != 1) {
+		printk(BIOS_DEBUG,
+		       "TPM: CRB Interface is not active. System needs reboot in order to active TPM.\n");
+		write32(CRB_REG(cur_loc, CRB_REG_INTF_ID), CRB_INTF_REG_INTF_SEL);
+		return -1;
+	}
+
+	write32(CRB_REG(cur_loc, CRB_REG_INTF_ID), CRB_INTF_REG_INTF_SEL);
+	write32(CRB_REG(cur_loc, CRB_REG_INTF_ID), CRB_INTF_REG_INTF_LOCK);
+
+	return 0;
+}
+
+/*
+ * Get active Locality
+ *
+ * Get the active locality
+ */
+static uint8_t crb_activate_locality(void)
+{
+
+	uint8_t locality = (read8(CRB_REG(0, CRB_REG_LOC_STATE)) >> 2) & 0x07;
+	printk(BIOS_SPEW, "Active locality: %i\n", locality);
+
+	int rc = crb_wait_for_reg32(CRB_REG(locality, CRB_REG_LOC_STATE), 750,
+				    LOC_STATE_LOC_ASSIGN, LOC_STATE_LOC_ASSIGN);
+	if (!rc && (locality == 0))
+		return locality;
+
+	if (rc)
+		write8(CRB_REG(locality, CRB_REG_LOC_CTRL), LOC_CTRL_REQ_ACCESS);
+
+
+	rc = crb_wait_for_reg32(CRB_REG(locality, CRB_REG_LOC_STATE), 750, LOC_STATE_LOC_ASSIGN,
+				LOC_STATE_LOC_ASSIGN);
+	if (rc) {
+		printk(BIOS_ERR, "TPM: Error - No Locality has been assigned TPM-wise.\n");
+		return 0;
+	}
+
+	rc = crb_wait_for_reg32(CRB_REG(locality, CRB_REG_LOC_STATE), 1500,
+				LOC_STATE_REG_VALID_STS, LOC_STATE_REG_VALID_STS);
+	if (rc) {
+		printk(BIOS_ERR, "TPM: Error - LOC_STATE Register %u contains errors.\n",
+		       locality);
+		return 0;
+	}
+
+
+	return locality;
+}
+
+/* Switch Device into a Ready State */
+static int crb_switch_to_ready(void)
+{
+	/* Transition into ready state */
+	write8(CRB_REG(cur_loc, CRB_REG_REQUEST), 0x1);
+	int rc = crb_wait_for_reg32(CRB_REG(cur_loc, CRB_REG_REQUEST), 200,
+					CRB_REG_REQUEST_CMD_RDY, 0x0);
+	if (rc) {
+		printk(BIOS_ERR,
+		       "TPM: Error - TPM did not transition into ready state in time.\n");
+		return -1;
+	}
+
+	/* Check TPM_CRB_CTRL_STS[0] to be "0" - no unrecoverable error */
+	rc = crb_wait_for_reg32(CRB_REG(cur_loc, CRB_REG_STATUS), 500, CRB_REG_STATUS_ERROR,
+				0x0);
+	if (rc) {
+		printk(BIOS_ERR, "TPM: Fatal Error - Could not recover.\n");
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * tpm2_init
+ *
+ * Even though the TPM does not need an initialization we check
+ * if the TPM responds and is in IDLE mode, which should be the
+ * normal bring up mode.
+ *
+ */
+int tpm2_init(void)
+{
+
+
+	if (crb_probe()) {
+		printk(BIOS_ERR, "TPM: Probe failed.\n");
+		return -1;
+	}
+
+	/* Read back control area structure */
+	crb_readControlArea();
+
+	/* Good to go. */
+	printk(BIOS_SPEW, "TPM: CRB TPM initialized successfully\n");
+
+	return 0;
+}
+
+/*
+ * tpm2_process_command
+ */
+size_t tpm2_process_command(const void *tpm2_command, size_t command_size, void *tpm2_response,
+			    size_t max_response)
+{
+	int rc;
+
+	if (command_size > control_area.command_size) {
+		printk(BIOS_ERR, "TPM: Command size is too big.\n");
+		return -1;
+	}
+
+	if (control_area.response_size < max_response) {
+		printk(BIOS_ERR, "TPM: Response size could be too big.\n");
+		return -1;
+	}
+
+	cur_loc = crb_activate_locality();
+
+	// Check if CMD bit is cleared.
+	rc = crb_wait_for_reg32(CRB_REG(0, CRB_REG_START), 250, CRB_REG_START_START, 0x0);
+	if (rc) {
+		printk(BIOS_ERR, "TPM: Error - Cmd Bit not cleared.\n");
+		return -1;
+	}
+
+	if (crb_switch_to_ready())
+		return -1;
+
+	// Write to Command Buffer
+	memcpy(control_area.command_bfr, tpm2_command, command_size);
+
+	// Write Start Bit
+	write8(CRB_REG(cur_loc, CRB_REG_START), 0x1);
+
+	// Poll for Response
+	rc = crb_wait_for_reg32(CRB_REG(cur_loc, CRB_REG_START), 3500, CRB_REG_START_START, 0);
+	if (rc) {
+		printk(BIOS_DEBUG, "TPM: Command Timed out.\n");
+		return -1;
+	}
+
+	// Check for errors
+	rc = crb_wait_for_reg32(CRB_REG(cur_loc, CRB_REG_STATUS), 200, CRB_REG_STATUS_ERROR, 0);
+	if (rc) {
+		printk(BIOS_DEBUG, "TPM: Command errored.\n");
+		return -1;
+	}
+
+	// Get Response Length
+	uint32_t length = be32_to_cpu(read32(control_area.response_bfr + 2));
+
+	/* Response has to have at least 6 bytes */
+	if (length < 6)
+		return 1;
+
+	// Copy Response
+	memcpy(tpm2_response, control_area.response_bfr, length);
+
+	if (crb_switch_to_ready()) {
+		printk(BIOS_DEBUG, "TPM: Can not transition into ready state again.\n");
+		return -1;
+	}
+
+	return length;
+}
+
+/*
+ * tp2_get_info
+ *
+ * Returns information about the TPM
+ *
+ */
+void tpm2_get_info(struct tpm2_info *tpm2_info)
+{
+	uint64_t interfaceReg = read64(CRB_REG(cur_loc, CRB_REG_INTF_ID));
+
+	tpm2_info->vendor_id = (interfaceReg >> 48) & 0xFFFF;
+	tpm2_info->device_id = (interfaceReg >> 32) & 0xFFFF;
+	tpm2_info->revision = (interfaceReg >> 24) & 0xFF;
+}
diff --git a/src/drivers/crb/tpm.h b/src/drivers/crb/tpm.h
new file mode 100644
index 0000000000..9bbed198f0
--- /dev/null
+++ b/src/drivers/crb/tpm.h
@@ -0,0 +1,70 @@
+/*
+ * Copyright 2016 The Chromium OS Authors. All rights reserved.
+ * Use of this source code is governed by a BSD-style license that can be
+ * found in the LICENSE file.
+ *
+ * This is a driver for a Command Response Buffer Interface
+ */
+
+/* CRB driver */
+/* address of locality 0 (CRB) */
+#define TPM_CRB_BASE_ADDRESS        CONFIG_CRB_TPM_BASE_ADDRESS
+
+#define CRB_REG(LOCTY, REG)                                 \
+	(void *)(CONFIG_CRB_TPM_BASE_ADDRESS + (LOCTY << 12) + REG)
+
+/* hardware registers */
+#define CRB_REG_LOC_STATE		0x00
+#define CRB_REG_LOC_CTRL		0x08
+#define CRB_REG_LOC_STS			0x0C
+
+/* LOC_CTRL BIT MASKS */
+#define LOC_CTRL_REQ_ACCESS		0x01
+
+/* LOC STATE BIT MASKS */
+#define LOC_STATE_LOC_ASSIGN	0x02
+#define LOC_STATE_REG_VALID_STS	0x80
+
+/* LOC STS BIT MASKS */
+#define LOC_STS_GRANTED			0x01
+
+#define CRB_REG_INTF_ID			0x30
+#define CRB_REG_REQUEST			0x40
+#define CRB_REG_STATUS			0x44
+#define CRB_REG_CANCEL			0x48
+#define CRB_REG_START			0x4C
+#define CRB_REG_INT_CTRL		0x50
+#define CRB_REG_CMD_SIZE		0x58
+#define CRB_REG_CMD_ADDR		0x5C
+#define CRB_REG_RESP_SIZE		0x64
+#define CRB_REG_RESP_ADDR		0x68
+
+/* CRB INTF BIT MASK */
+#define CRB_INTF_REG_CAP_CRB	(1<<14)
+#define CRB_INTF_REG_INTF_SEL	(1<<17)
+#define CRB_INTF_REG_INTF_LOCK	(1<<19)
+
+
+/*REQUEST Register related */
+#define CRB_REG_REQUEST_CMD_RDY		0x01
+#define CRB_REG_REQUEST_GO_IDLE		0x02
+
+/* STATUS Register related */
+#define CRB_REG_STATUS_ERROR		0x01
+#define CRB_REG_STATUS_IDLE			0x02
+
+/* START Register related */
+#define CRB_REG_START_START			0x01
+
+/* TPM Info Struct */
+struct tpm2_info {
+	uint16_t vendor_id;
+	uint16_t device_id;
+	uint16_t revision;
+};
+
+
+int tpm2_init(void);
+void tpm2_get_info(struct tpm2_info *tpm2_info);
+size_t tpm2_process_command(const void *tpm2_command, size_t command_size,
+			    void *tpm2_response, size_t max_response);
diff --git a/src/security/tpm/Kconfig b/src/security/tpm/Kconfig
index e6414d385f..3af6d69e2b 100644
--- a/src/security/tpm/Kconfig
+++ b/src/security/tpm/Kconfig
@@ -28,7 +28,7 @@ config TPM2
 	default y if MAINBOARD_HAS_TPM2 || USER_TPM2
 	depends on MAINBOARD_HAS_I2C_TPM_GENERIC || MAINBOARD_HAS_LPC_TPM \
 						 || MAINBOARD_HAS_I2C_TPM_ATMEL || MAINBOARD_HAS_I2C_TPM_CR50 \
-						 || MAINBOARD_HAS_SPI_TPM_CR50
+						 || MAINBOARD_HAS_SPI_TPM_CR50 || MAINBOARD_HAS_CRB_TPM
 
 config MAINBOARD_HAS_TPM1
 	bool
@@ -58,7 +58,7 @@ config USER_TPM2
 	bool "2.0"
 	depends on MAINBOARD_HAS_I2C_TPM_GENERIC || MAINBOARD_HAS_LPC_TPM \
 						 || MAINBOARD_HAS_I2C_TPM_ATMEL || MAINBOARD_HAS_I2C_TPM_CR50 \
-						 || MAINBOARD_HAS_SPI_TPM_CR50
+						 || MAINBOARD_HAS_SPI_TPM_CR50 || MAINBOARD_HAS_CRB_TPM
 	help
 		Enable this option to enable TPM 2.0 support in coreboot.