summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-04-14 16:39:30 +0000
committerStefan Reinauer <stepan@openbios.org>2010-04-14 16:39:30 +0000
commit8816cdf3118d9d197c1b56b0ce0ed63cc119dd71 (patch)
treefc90141e364401552677424dd786c2558b5f2309
parent4bcfb095b1de5767006527dbd2f8f3c4bc9d22a2 (diff)
downloadcoreboot-8816cdf3118d9d197c1b56b0ce0ed63cc119dd71.tar.xz
geeesh! And this really compiles and even runs?
Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5431 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/via/epia-m700/romstage.c115
-rw-r--r--src/northbridge/via/vx800/detection.c5
-rw-r--r--src/northbridge/via/vx800/dev_init.c5
-rw-r--r--src/northbridge/via/vx800/dram_init.h4
-rw-r--r--src/northbridge/via/vx800/drdy_bl.c10
-rw-r--r--src/northbridge/via/vx800/examples/chipset_init.c363
-rw-r--r--src/northbridge/via/vx800/pci_rawops.h52
-rw-r--r--src/northbridge/via/vx800/uma_ram_setting.c2
-rw-r--r--src/northbridge/via/vx800/vx800_early_smbus.c8
-rw-r--r--src/southbridge/via/k8t890/k8t890_early_car.c2
10 files changed, 255 insertions, 311 deletions
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c
index 6f8a1c09da..ab148e478d 100644
--- a/src/mainboard/via/epia-m700/romstage.c
+++ b/src/mainboard/via/epia-m700/romstage.c
@@ -58,7 +58,7 @@
* This acpi_is_wakeup_early_via_VX800 is from Rudolf's patch on the list:
* http://www.coreboot.org/pipermail/coreboot/2008-January/028787.html.
*/
-int acpi_is_wakeup_early_via_vx800(void)
+static int acpi_is_wakeup_early_via_vx800(void)
{
device_t dev;
u16 tmp, result;
@@ -94,8 +94,6 @@ static inline int spd_read_byte(unsigned device, unsigned address)
static void enable_mainboard_devices(void)
{
device_t dev;
- uint16_t values;
-
#if 0
/*
* Add and close this switch, since some line cause error, some
@@ -145,6 +143,8 @@ static void enable_mainboard_devices(void)
#if 0
dev = 0;
dev = pci_locate_device(PCI_ID(0x1106, PCI_DEVICE_ID_VIA_VX855_IDE), 0);
+
+ uint16_t values;
values = pci_read_config16(dev, 0xBA);
values &= ~0xffff;
values |= 0x5324;
@@ -202,68 +202,68 @@ static void enable_shadow_ram(void)
*/
static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
/* VT3409 no PCI-E */
- 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E, // Set Exxxxxxx as pcie mmio config range
- 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B, // Support extended cfg address of pcie
- // 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02, // APIC Interrupt((BT_INTR)) Control
+ { 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E }, // Set Exxxxxxx as pcie mmio config range
+ { 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B }, // Support extended cfg address of pcie
+ // { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control
// Set ROMSIP value by software
/*
- 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pullup Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33, // 2x Host Adr Strobe/Pad Pulldown Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pullup Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33, // 4x Host Dat Strobe/Pad Pulldown Driving = 3
- 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21, // Memory I/F timing ctrl
- 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1, // Memory I/F timing ctrl
- 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18, // AGTL+ I/O Circuit
- 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C, // AGTL+ Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33, // 2X AGTL+ Auto Compensation Offset
- 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33, // 4X AGTL+ Auto Compensation Offset
- 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72, // AGTL Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77, // AGTL Compensation Status
- 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44, // Input Host Address / Host Strobe Delay Control for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22, // Input Host Address / Host Strobe Delay Control for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00, // Output Delay Control of PAD for HA Group
- 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA, // Host Address / Address Clock Output Delay Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
- 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44, // Host Data Receiving Strobe Delay Ctrl 1
- 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44, // Host Data Receiving Strobe Delay Ctrl 2
- 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00, // Output Delay of PAD for HDSTB
- 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00, // Output Delay of PAD for HD
- 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 0)
- 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 1)
- 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 2)
- 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44, // Host Data / Strobe CKG Control (Group 3)
+ { 0x00, 0xFF, NB_HOST_REG(0x70), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pullup Driving = 3
+ { 0x00, 0xFF, NB_HOST_REG(0x71), 0x77, 0x33 }, // 2x Host Adr Strobe/Pad Pulldown Driving = 3
+ { 0x00, 0xFF, NB_HOST_REG(0x72), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pullup Driving = 3
+ { 0x00, 0xFF, NB_HOST_REG(0x73), 0x77, 0x33 }, // 4x Host Dat Strobe/Pad Pulldown Driving = 3
+ { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0x21 }, // Memory I/F timing ctrl
+ { 0x00, 0xFF, NB_HOST_REG(0x74), 0xFF, 0xE1 }, // Memory I/F timing ctrl
+ { 0x00, 0xFF, NB_HOST_REG(0x75), 0xFF, 0x18 }, // AGTL+ I/O Circuit
+ { 0x00, 0xFF, NB_HOST_REG(0x76), 0xFB, 0x0C }, // AGTL+ Compensation Status
+ { 0x00, 0xFF, NB_HOST_REG(0x78), 0xFF, 0x33 }, // 2X AGTL+ Auto Compensation Offset
+ { 0x00, 0xFF, NB_HOST_REG(0x79), 0xFF, 0x33 }, // 4X AGTL+ Auto Compensation Offset
+ { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x72 }, // AGTL Compensation Status
+ { 0x00, 0xFF, NB_HOST_REG(0x7A), 0x3F, 0x77 }, // AGTL Compensation Status
+ { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x44 }, // Input Host Address / Host Strobe Delay Control for HA Group
+ { 0x00, 0xFF, NB_HOST_REG(0x7B), 0xFF, 0x22 }, // Input Host Address / Host Strobe Delay Control for HA Group
+ { 0x00, 0xFF, NB_HOST_REG(0x7C), 0xFF, 0x00 }, // Output Delay Control of PAD for HA Group
+ { 0x00, 0xFF, NB_HOST_REG(0x7D), 0xFF, 0xAA }, // Host Address / Address Clock Output Delay Control (Only for P4 Bus)
+ { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
+ { 0x00, 0xFF, NB_HOST_REG(0x7E), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
+ { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x10 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
+ { 0x00, 0xFF, NB_HOST_REG(0x7F), 0xFF, 0x40 }, // Host Address CKG Rising / Falling Time Control (Only for P4 Bus)
+ { 0x00, 0xFF, NB_HOST_REG(0x80), 0x3F, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 1
+ { 0x00, 0xFF, NB_HOST_REG(0x81), 0xFF, 0x44 }, // Host Data Receiving Strobe Delay Ctrl 2
+ { 0x00, 0xFF, NB_HOST_REG(0x82), 0xFF, 0x00 }, // Output Delay of PAD for HDSTB
+ { 0x00, 0xFF, NB_HOST_REG(0x83), 0xFF, 0x00 }, // Output Delay of PAD for HD
+ { 0x00, 0xFF, NB_HOST_REG(0x84), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 0)
+ { 0x00, 0xFF, NB_HOST_REG(0x85), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 1)
+ { 0x00, 0xFF, NB_HOST_REG(0x86), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 2)
+ { 0x00, 0xFF, NB_HOST_REG(0x87), 0xFF, 0x44 }, // Host Data / Strobe CKG Control (Group 3)
*/
// CPU Host Bus Control
- 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8
- // 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
- 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
- 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB, // CPU I/F Ctrl-2: Enable all for performance
- // 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK
- 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK
- 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C, // Misc Ctrl: Enable 8QW burst Mem Access
- // 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06, // Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04, // Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63, // Write Policy 1
- // 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL
- // 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2, // Write Policy
- 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88, // Bandwidth Timer
- 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46, // CPU Misc Ctrl
- // 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B, // CPU Miscellaneous Control 3
- // 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A, // CPU Miscellaneous Control 2
- 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41, // CPU Miscellaneous Control 3
- 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06, // CPU Miscellaneous Control 4
+ { 0x00, 0xFF, NB_HOST_REG(0x50), 0x1F, 0x08 }, // Request phase ctrl: Dynamic Defer Snoop Stall Count = 8
+ // { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7F }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
+ { 0x00, 0xFF, NB_HOST_REG(0x51), 0xFF, 0x7C }, // CPU I/F Ctrl-1: Disable Fast DRDY and RAW
+ { 0x00, 0xFF, NB_HOST_REG(0x52), 0xCB, 0xCB }, // CPU I/F Ctrl-2: Enable all for performance
+ // { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x88 }, // Arbitration: Host/Master Occupancy timer = 8*4 HCLK
+ { 0x00, 0xFF, NB_HOST_REG(0x53), 0xFF, 0x44 }, // Arbitration: Host/Master Occupancy timer = 4*4 HCLK
+ { 0x00, 0xFF, NB_HOST_REG(0x54), 0x1E, 0x1C }, // Misc Ctrl: Enable 8QW burst Mem Access
+ // { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x06 }, // Miscellaneous Control 2
+ { 0x00, 0xFF, NB_HOST_REG(0x55), 0x06, 0x04 }, // Miscellaneous Control 2
+ { 0x00, 0xFF, NB_HOST_REG(0x56), 0xF7, 0x63 }, // Write Policy 1
+ // { 0x00, 0xFF, NB_HOST_REG(0x59), 0x3D, 0x01 }, // CPU Miscellaneous Control 1, enable Lowest-Priority IPL
+ // { 0x00, 0xFF, NB_HOST_REG(0x5c), 0xFF, 0x00 }, // CPU Miscellaneous Control 2
+ { 0x00, 0xFF, NB_HOST_REG(0x5D), 0xFF, 0xA2 }, // Write Policy
+ { 0x00, 0xFF, NB_HOST_REG(0x5E), 0xFF, 0x88 }, // Bandwidth Timer
+ { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x46, 0x46 }, // CPU Misc Ctrl
+ // { 0x00, 0xFF, NB_HOST_REG(0x90), 0xFF, 0x0B }, // CPU Miscellaneous Control 3
+ // { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0B }, // CPU Miscellaneous Control 2
+ { 0x00, 0xFF, NB_HOST_REG(0x96), 0x0B, 0x0A }, // CPU Miscellaneous Control 2
+ { 0x00, 0xFF, NB_HOST_REG(0x98), 0xC1, 0x41 }, // CPU Miscellaneous Control 3
+ { 0x00, 0xFF, NB_HOST_REG(0x99), 0x0E, 0x06 }, // CPU Miscellaneous Control 4
// Set APIC and SMRAM
- 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00, // APIC Related Control
- 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg
- 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 // End of the table
+ { 0x00, 0xFF, NB_HOST_REG(0x97), 0xFF, 0x00 }, // APIC Related Control
+ { 0x00, 0xFF, NB_DRAMC_REG(0x86), 0xD6, 0x29 }, // SMM and APIC Decoding: enable APIC, MSI and SMRAM A-Seg
+ { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } // End of the table
};
#define USE_VCP 1 /* 0 means "use DVP". */
@@ -383,7 +383,6 @@ void EmbedComInit(void)
/* cache_as_ram.inc jumps to here. */
void main(unsigned long bist)
{
- unsigned cpu_reset = 0;
u16 boot_mode;
u8 rambits, Data8, Data;
device_t device;
diff --git a/src/northbridge/via/vx800/detection.c b/src/northbridge/via/vx800/detection.c
index 51aa9fa302..6bbfef0168 100644
--- a/src/northbridge/via/vx800/detection.c
+++ b/src/northbridge/via/vx800/detection.c
@@ -17,6 +17,11 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
+/* FIXME this should go away */
+static const struct mem_controller ctrl = {
+ .channel0 = {0x50, 0x51},
+};
+
#define SMBUS_ADDR_CH_A_1 0xA0 /* Dimmx */
#define SMBUS_ADDR_CH_A_2 0xA2 /* Dimmx */
#define SMBUS_ADDR_CH_B_1 0xA4 /* Dimmx */
diff --git a/src/northbridge/via/vx800/dev_init.c b/src/northbridge/via/vx800/dev_init.c
index 3a29d29aca..c3097cf2cb 100644
--- a/src/northbridge/via/vx800/dev_init.c
+++ b/src/northbridge/via/vx800/dev_init.c
@@ -166,7 +166,7 @@ Purpose : DRAM initialize according to the bios porting guid
#define EXIST_TEST_PATTERN 0x55555555
#define NOT_EXIST_TEST_PATTERN 0xAAAAAAAA
-BOOLEAN ChkForExistLowBank(void)
+static BOOLEAN ChkForExistLowBank(void)
{
u32 *Address, data32;
@@ -207,9 +207,6 @@ BOOLEAN ChkForExistLowBank(void)
return TRUE;
}
-void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr);
-void InitDDR2CHB(DRAM_SYS_ATTR *DramAttr);
-
void DRAMInitializeProc(DRAM_SYS_ATTR *DramAttr)
{
u8 shift, idx;
diff --git a/src/northbridge/via/vx800/dram_init.h b/src/northbridge/via/vx800/dram_init.h
index 27f73f0f4d..fc0117e2db 100644
--- a/src/northbridge/via/vx800/dram_init.h
+++ b/src/northbridge/via/vx800/dram_init.h
@@ -121,10 +121,6 @@ struct mem_controller {
u8 channel0[MAX_DIMMS];
};
-static const struct mem_controller ctrl = {
- .channel0 = {0x50, 0x51},
-};
-
typedef struct _DRAM_CONFIG_DATA {
u8 DramClk;
u8 DramTiming;
diff --git a/src/northbridge/via/vx800/drdy_bl.c b/src/northbridge/via/vx800/drdy_bl.c
index da8aae13c8..393f623f25 100644
--- a/src/northbridge/via/vx800/drdy_bl.c
+++ b/src/northbridge/via/vx800/drdy_bl.c
@@ -404,10 +404,7 @@ static const u8 PT894_64bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] =
void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
{
- u8 Data, CL, RDRPH;
- u8 CpuFreq, DramFreq;
- u8 ProgData[PT894_RDRDY_TBL_Width];
-
+ u8 Data;
/*
this function has 3 switchs, correspond to 3 level of Drdy setting.
0:Slowest, 1:Default, 2:Optimize
@@ -464,6 +461,9 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
}
#endif
#if 0 // 2:Optimize
+ u8 CpuFreq, DramFreq;
+ u8 CL, RDRPH;
+
//CL :reg6x[2:0]
Data = pci_read_config8(MEMCTRL, 0x62);
CL = Data & 0x07;
@@ -484,6 +484,8 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
DelayMode = CL + RDRPH; // RDELAYMD = bit0 of (CAS Latency + RDRPH)
DelayMode &= 0x01;
+ u8 ProgData[PT894_RDRDY_TBL_Width];
+
//In 364, there is no 128 bit
if (DelayMode == 1) { // DelayMode 1
u8 Index;
diff --git a/src/northbridge/via/vx800/examples/chipset_init.c b/src/northbridge/via/vx800/examples/chipset_init.c
index 08d3c95048..8cee44504b 100644
--- a/src/northbridge/via/vx800/examples/chipset_init.c
+++ b/src/northbridge/via/vx800/examples/chipset_init.c
@@ -43,12 +43,12 @@ static const struct VIA_PCI_REG_INIT_TABLE mSbStage1InitTbl[] = {
{0x00, 0xFF, SB_VLINK_REG(0xE6), 0xFF, 0x39}, // Enable SMM A-Seg, MSI and Io APIC
///// SPI-BAR.
//// SPI_BASE_ADDRESS = 0xFED1 0000
- 0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00,
- 0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1,
- 0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE,
-// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00,//this , for the different macro
-// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1,
-// 0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE,
+ {0x00, 0xFF, SB_LPC_REG(0xBC), 0xFF, 0x00},
+ {0x00, 0xFF, SB_LPC_REG(0xBD), 0xFF, 0xD1},
+ {0x00, 0xFF, SB_LPC_REG(0xBE), 0xFF, 0xFE},
+// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBC), 0xFF, 0x00},//this , for the different macro
+// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBD), 0xFF, 0xD1},
+// {0x00, 0xFF, ((0x11<<16)|(0x00<<8)|0xBE), 0xFF, 0xFE},
///// End of 2008-04-17
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
@@ -60,191 +60,184 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage2InitTable[] = {
// D0F2~D0F3 is configured by MemoryInit Peim
// D0F4: NB PMU
- 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB,
- 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05,
- 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8,
- 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF,
- 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC,
- 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19,
- 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00,
- 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF,
- 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF,
- 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC,
- 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80,
- 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0,
- 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6,
- 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80,
- 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20,
+ { 0x00, 0xFF, NB_PMU_REG(0x84), 0x00, 0xDB },
+ { 0x00, 0xFF, NB_PMU_REG(0x85), 0x00, 0x05 },
+ { 0x00, 0xFF, NB_PMU_REG(0x89), 0x00, 0xF8 },
+ { 0x00, 0xFF, NB_PMU_REG(0x8B), 0x00, 0xBF },
+ { 0x00, 0xFF, NB_PMU_REG(0x8D), 0x00, 0xFC },
+ { 0x00, 0xFF, NB_PMU_REG(0x8E), 0x00, 0x19 },
+ { 0x00, 0xFF, NB_PMU_REG(0x8F), 0x03, 0x00 },
+ { 0x00, 0xFF, NB_PMU_REG(0x90), 0x00, 0xFF },
+ { 0x00, 0xFF, NB_PMU_REG(0x91), 0x00, 0xFF },
+ { 0x00, 0xFF, NB_PMU_REG(0x92), 0x00, 0xCC },
+ { 0x00, 0xFF, NB_PMU_REG(0xA0), 0x00, 0x80 },
+ { 0x00, 0xFF, NB_PMU_REG(0xA1), 0x00, 0xE0 },
+ { 0x00, 0xFF, NB_PMU_REG(0xA2), 0x00, 0xD6 },
+ { 0x00, 0xFF, NB_PMU_REG(0xA3), 0x00, 0x80 },
+ { 0x00, 0xFF, NB_PMU_REG(0xA8), 0x00, 0x20 },
// D0F5: NB APIC, PXPTRF and MSGC
//Note: the Rx6A, RCRBH Base Address, is not set, which is related to PCIE Root Complex.
//Note: the Rx60, Extended CFG Address. Support and Rx61, Extended CFG Address, are set by NB Peim that is in the PEI Phase.
//Note: the Rx42, APIC Interrupt((BT_INTR)) Control, is set by NB Peim that is in PEI phase.
- 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00,
- 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80,
- 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04,
- 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00,
- 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02,
- 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00,
- 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06,
- 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1.
- 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00, //Set RVC1RPSW, RVC1RQ1T to 1.
- 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81,
- 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28,
- 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0,
- 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01, // RWAKEEN
-// 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00, //RTDNP2B32EN
- 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20,
- 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00, //RP2P1ABORT
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x50), 0x00, 0x00 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x54), 0x00, 0x80 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x55), 0x00, 0x04 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x58), 0x00, 0x00 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x59), 0x00, 0x02 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x5E), 0x00, 0x00 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x5F), 0x00, 0x06 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x80), 0x00, 0x18 }, //Set RVC1DM, RTHBHIT, RUWRDYD, RUPRRDY1, RUWPOPHD to 1.
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x82), 0x00, 0x00 }, //Set RVC1RPSW, RVC1RQ1T to 1.
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x83), 0x00, 0x81 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x84), 0x00, 0x28 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0xC0 },
+ { 0x00, 0xFF, NB_MSGC_REG(0xA3), 0x00, 0x01 }, // RWAKEEN
+ //{ 0x00, 0xFF, NB_PXPTRF_REG(0x64), 0x40, 0x00 }, //RTDNP2B32EN
+ { 0x00, 0xFF, NB_PXPTRF_REG(0xF3), 0xFC, 0x20 },
+ { 0x00, 0xFF, NB_PXPTRF_REG(0x85), 0x00, 0x00 }, //RP2P1ABORT
// fine-tune
// If no settings, C7 will hang or reboot in XP, but CN will not.
- 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00,
- 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03,
- 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00,
- 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00,
- 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01,
- 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10,
- 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08,
- 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04, // ACPI Base addr
- 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01, // APIC MSI
- 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00, // APIC MSI
+ { 0x00, 0xFF, NB_HOST_REG(0x51), 0x84, 0x00 },
+ { 0x00, 0xFF, NB_HOST_REG(0x52), 0x0F, 0x03 },
+ { 0x00, 0xFF, NB_HOST_REG(0x54), 0x04, 0x00 },
+ { 0x00, 0xFF, NB_HOST_REG(0x55), 0x04, 0x00 },
+ { 0x00, 0xFF, NB_HOST_REG(0x59), 0x09, 0x01 },
+ { 0x00, 0xFF, NB_HOST_REG(0x5C), 0x10, 0x10 },
+ { 0x00, 0xFF, NB_HOST_REG(0x5F), 0x0E, 0x08 },
+ { 0x00, 0xFF, NB_HOST_REG(0x92), 0xFF, 0x04 }, // ACPI Base addr
+ { 0x00, 0xFF, NB_HOST_REG(0x97), 0x01, 0x01 }, // APIC MSI
+ { 0x00, 0xFF, NB_HOST_REG(0x99), 0x02, 0x00 }, // APIC MSI
//GTL
- 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66,
- 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33,
- 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33,
- 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33,
- 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33,
- 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20,
- 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00,
+ { 0x00, 0xFF, NB_HOST_REG(0x73), 0xFF, 0x66 },
+ { 0x00, 0xFF, NB_HOST_REG(0xB2), 0xFF, 0x33 },
+ { 0x00, 0xFF, NB_HOST_REG(0xB3), 0xFF, 0x33 },
+ { 0x00, 0xFF, NB_HOST_REG(0xBC), 0xFF, 0x33 },
+ { 0x00, 0xFF, NB_HOST_REG(0xBD), 0xFF, 0x33 },
+ { 0x00, 0xFF, NB_HOST_REG(0xC5), 0x30, 0x20 },
+ { 0x00, 0xFF, NB_HOST_REG(0xC8), 0x10, 0x00 },
// End of Table
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-
};
static const struct VIA_PCI_REG_INIT_TABLE mBusControllerInitTable[] = {
// D17F0: LPC
- 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44, // Enable I/O Recovery Time, 4D0/4D1 Support
- 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD
- 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B, // RENDTX, ENWBTO, ENRBTO
- // 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10, // It is related to INTH#
- //0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C, //RMRPW, RIRPW // Reserved in 409 by Eric
+ { 0x00, 0xFF, SB_LPC_REG(0x40), 0x44, 0x44 }, // Enable I/O Recovery Time, 4D0/4D1 Support
+ { 0x00, 0xFF, SB_LPC_REG(0x42), 0xF8, 0xF0 }, // ENLBUF, GINTREN, FLUSHEN, RBRSTRD
+ { 0x00, 0xFF, SB_LPC_REG(0x43), 0x0F, 0x0B }, // RENDTX, ENWBTO, ENRBTO
+ //{ 0x00, 0xFF, SB_LPC_REG(0x46), 0x00, 0x10 }, // It is related to INTH#
+ //{ 0x00, 0xFF, SB_LPC_REG(0x48), 0x00, 0x0C }, //RMRPW, RIRPW // Reserved in 409 by Eric
// Internal RTC, Mouse, Keyboard // set in PEI by Eric
- //0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D, // Enable Internal RTC, Internal PS2 Mouse/Keyboard
+ //{ 0x00, 0xFF, SB_LPC_REG(0x51), 0x10, 0x0D }, // Enable Internal RTC, Internal PS2 Mouse/Keyboard
// RTC
- 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01, //RTC Rx32 Map to Centrury Byte
+ { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x01 }, //RTC Rx32 Map to Centrury Byte
- // 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02, // RDMEGAS
- //0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric
+ //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x02 }, // RDMEGAS
+ //{ 0x00, 0xFF, SB_LPC_REG(0x4E), 0x00, 0x08 }, // Enable RTC port 74/75, ENEXRTC // set in PEI by Eric
// Serial IRQ // set in PEI by Eric
- //0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock.
+ //{ 0x00, 0xFF, SB_LPC_REG(0x52), 0x0F, 0x09 }, // Enable Serial IRQ, Start Frame Width is 6 PCI Clock.
// Enable 4D0h/4D1h Port
- //0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04, // EISAXT // set in PEI by Eric
+ //{ 0x00, 0xFF, SB_LPC_REG(0x40), 0x00, 0x04 }, // EISAXT // set in PEI by Eric
// Config ROM Interface
// Enable SPI/Set SPI Memory Base Address
// It is initialized in PEI Phase
// Subsystem ID/Vendor ID Back Door
- 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06,
- 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11,
- 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09,
- 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34,
+ { 0x00, 0xFF, SB_LPC_REG(0x70), 0xFF, 0x06 },
+ { 0x00, 0xFF, SB_LPC_REG(0x71), 0xFF, 0x11 },
+ { 0x00, 0xFF, SB_LPC_REG(0x72), 0xFF, 0x09 },
+ { 0x00, 0xFF, SB_LPC_REG(0x73), 0xFF, 0x34 },
- 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40,
- 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51, // Orgin value 0x53, modify for 409 by Eric
- 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01,
+ { 0x00, 0xFF, SB_LPC_REG(0x4C), 0xC0, 0x40 },
+ { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x00, 0x51 }, // Orgin value 0x53, modify for 409 by Eric
+ { 0x00, 0xFF, SB_LPC_REG(0x67), 0x03, 0x01 },
- 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00, // Setting PCI device enable
- 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00, // Setting PCI device enable
- 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00, // Setting HDAC enable
+ { 0x00, 0xFF, SB_LPC_REG(0x50), 0x7E, 0x00 }, // Setting PCI device enable
+ { 0x00, 0xFF, SB_LPC_REG(0x51), 0xD0, 0x00 }, // Setting PCI device enable
+ { 0x00, 0xFF, SB_VLINK_REG(0xD1), 0x04, 0x00 }, // Setting HDAC enable
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
};
static const struct VIA_PCI_REG_INIT_TABLE mPCI1InitTable[] = {
//PCI1 Programming Sequence
//(1)Configure D17F7
- 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03,
- 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08, // Reserved in 409 by Eric
- 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41, //RENPPB, RP2CFLSH
- 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion
- // 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured.
- //0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81, //RSUB_DEC_P2P, RSUBDECOD(Window Vista)
+ { 0x00, 0xFF, SB_VLINK_REG(0x04), 0x00, 0x03 },
+ { 0x00, 0xFF, SB_VLINK_REG(0x0C), 0x00, 0x08 }, // Reserved in 409 by Eric
+ { 0x00, 0xFF, SB_VLINK_REG(0x4F), 0x40, 0x41 }, //RENPPB, RP2CFLSH
+ { 0x00, 0xFF, SB_VLINK_REG(0x77), 0x00, 0x48 }, //ROP2CFLSH, RFFTMR[1:0]. ROP2CFLSH work with Rx4F[0](RP2CFLSH) assertion
+ // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x80 }, //RSUB_DEC_P2P, RSUBDECOD(Window xp). If Bit7 is set, PCI lock will occured.
+ // { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x00, 0x81 }, //RSUB_DEC_P2P, RSUBDECOD(Window Vista)
//(2)Configure D19F0
- 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07,
+ { 0x00, 0xFF, SB_P2PB_REG(0x04), 0x00, 0x07 },
//(3)Performance Recommended Setting
//Save Power
- 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01,
- 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E,
- 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00,
+ { 0x00, 0xFF, SB_VLINK_REG(0xE2), 0x1F, 0x01 },
+ { 0x00, 0xFF, SB_VLINK_REG(0xE3), 0xF1, 0x5E },
+ { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x40, 0x00 },
//Enhence Host To PCI cycle performance and PCI-To-Host Cycle performance
- 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82,
- 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0,
- 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE,
+ { 0x00, 0xFF, SB_VLINK_REG(0x70), 0x00, 0x82 },
+ { 0x00, 0xFF, SB_VLINK_REG(0x71), 0x30, 0xC0 },
+ { 0x00, 0xFF, SB_VLINK_REG(0x72), 0x00, 0xEE },
//Cycle Control
- 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01,
- 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C,
+ { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x00, 0x01 },
+ { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x0C },
//Arbitration control
- 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F,
- 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0,
+ { 0x00, 0xFF, SB_VLINK_REG(0x75), 0x00, 0x0F },
+ { 0x00, 0xFF, SB_VLINK_REG(0x76), 0x00, 0xD0 },
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
};
static const struct VIA_PCI_REG_INIT_TABLE mCCAInitTable[] = {
-
- 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08, //RVWREQ, ROABKDOOR
+ { 0x00, 0xFF, SB_VLINK_REG(0xFC), 0x02, 0x08 }, //RVWREQ, ROABKDOOR
//CCA's Register Programming sequence
- 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08, //Config Azalia's upstream cycle high priority and other low priority
- 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80, //Disable bypass asynchronous circuit
- 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11, // Set SM Internal Device and HDAC Occupy Timer
- 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11, // Set SM Internal Device and HDAC Promote Timer
- 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02, //Use SB internal devices's original REQ
- 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle
- 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C, //RLCKXP2C, RFSBVK.
- 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00, //RBLKAPIC, RAZC3
- 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02, //RNMIFSB, RFSBVK
- 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme
- 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00, //Let CCA use dynamic clock.
+ { 0x00, 0xFF, SB_VLINK_REG(0x50), 0x00, 0x08 }, //Config Azalia's upstream cycle high priority and other low priority
+ { 0x00, 0xFF, SB_VLINK_REG(0x51), 0x40, 0x80 }, //Disable bypass asynchronous circuit
+ { 0x00, 0xFF, SB_VLINK_REG(0x52), 0x00, 0x11 }, // Set SM Internal Device and HDAC Occupy Timer
+ { 0x00, 0xFF, SB_VLINK_REG(0x53), 0x00, 0x11 }, // Set SM Internal Device and HDAC Promote Timer
+ { 0x00, 0xFF, SB_VLINK_REG(0x54), 0xFF, 0x02 }, //Use SB internal devices's original REQ
+ { 0x00, 0xFF, SB_VLINK_REG(0x73), 0x10, 0x00 }, //RPINOWSC. Enable APIC Cycle Block P2C Write Cycle
+ { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x3C }, //RLCKXP2C, RFSBVK.
+ { 0x00, 0xFF, SB_VLINK_REG(0xE1), 0x07, 0x00 }, //RBLKAPIC, RAZC3
+ { 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x04, 0x02 }, //RNMIFSB, RFSBVK
+ { 0x00, 0xFF, SB_VLINK_REG(0xE0), 0xF0, 0x90 }, //RCCA_NEWCLK, RCCA_CLKON. Use New dynamic clock scheme
+ { 0x00, 0xFF, SB_VLINK_REG(0xE7), 0xFF, 0x00 }, //Let CCA use dynamic clock.
//The CCA is also relate to D17F0
- // 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00, //Disable CCA Test Mode
- 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric
+ //{ 0x00, 0xFF, SB_LPC_REG(0x49), 0x1F, 0x00 }, //Disable CCA Test Mode
+ { 0x00, 0xFF, SB_LPC_REG(0x74), 0xFF, 0x00 }, // Let DMA cycles from internal devices directly go to NB // Reserved in 409 by Eric
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
};
static const struct VIA_PCI_REG_INIT_TABLE IDEC_INIT[] = {
-
- // 0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05, //set to native mode
- 0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07,
- //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F,
+ //{0x00, 0xFF, SB_IDEC_REG(0x09), 0x00, 0x05}, //set to native mode
+ {0x00, 0xFF, SB_IDEC_REG(0x04), 0x00, 0x07},
+ //{0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F},
{0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-
};
static const struct VIA_PCI_REG_INIT_TABLE mSbApicInitTable[] = {
- 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00,
- 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00,
- 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00,
- 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40,
- 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04,
- //0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F,
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-
+ { 0x00, 0xFF, SB_LPC_REG(0x4D), 0x04, 0x00 },
+ { 0x00, 0xFF, SB_LPC_REG(0x5B), 0x0E, 0x00 },
+ { 0x00, 0xFF, SB_LPC_REG(0x6C), 0x08, 0x00 },
+ { 0x00, 0xFF, SB_LPC_REG(0x58), 0x00, 0x40 },
+ { 0x00, 0xFF, SB_VLINK_REG(0x74), 0x00, 0x04 },
+ //{ 0x00, 0xFF, SB_VLINK_REG(0x7C), 0x00, 0x7F },
+ { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
};
-
-
void AcpiInit(void)
{
device_t_raw rawdevice = 0;
@@ -268,10 +261,8 @@ void AcpiInit(void)
// Close all SMI/Io Traps
outb(0x00, VX800_ACPI_IO_BASE + 0x42);
-
}
-
void Stage2NbInit(void)
{
device_t_raw rawdevice = 0;
@@ -290,7 +281,6 @@ void Stage2NbInit(void)
//vx855 NB no pcie bus
//vx855 NB no apic
-
}
void IDECSupportOption(u8 sbchiprev)
@@ -313,7 +303,6 @@ void InitIDEC(u8 sbchiprev)
IDECSupportOption(sbchiprev);
}
-
void InitUHCI(u8 Number, u8 bEnable)
{
u8 Mask, Value;
@@ -374,25 +363,24 @@ void InitUHCI(u8 Number, u8 bEnable)
static const struct VIA_PCI_REG_INIT_TABLE mEHCIInitTable[] = {
//EHCI
- 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0,
- 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80,
- 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E,
- 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68,
- 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69,
- 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94,
- 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00,
- 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A,
- 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89,
- 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03,
- 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A,
- 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00,
- 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00,
- 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00,
- 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00,
- 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01,
- 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11,
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
-
+ { 0x00, 0xFF, SB_EHCI_REG(0x43), 0x00, 0xC0 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x50), 0x00, 0x80 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x48), 0x20, 0x9E },
+ { 0x00, 0xFF, SB_EHCI_REG(0x49), 0x10, 0x68 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x4B), 0x00, 0x69 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x4D), 0x00, 0x94 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x52), 0x08, 0x00 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x5A), 0x00, 0x8A },
+ { 0x00, 0xFF, SB_EHCI_REG(0x5B), 0x00, 0x89 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x5C), 0x00, 0x03 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x5D), 0x00, 0x9A },
+ { 0x00, 0xFF, SB_EHCI_REG(0x5E), 0x00, 0x00 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x6B), 0x00, 0x00 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x6D), 0x00, 0x00 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x6F), 0xF0, 0x00 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x4E), 0x01, 0x01 },
+ { 0x00, 0xFF, SB_EHCI_REG(0x4F), 0x00, 0x11 },
+ { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
};
void InitEHCI(u8 Number, u8 bEnable)
@@ -483,23 +471,23 @@ void HpetInit(void)
static const struct VIA_PCI_REG_INIT_TABLE mPMUInitTable[] = {
// Power Management
- 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20,
- 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00,
- 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18,
+ { 0x00, 0xFF, SB_LPC_REG(0x80), 0x00, 0x20 },
+ { 0x00, 0xFF, SB_LPC_REG(0x8C), 0x02, 0x00 },
+ { 0x00, 0xFF, SB_LPC_REG(0x8D), 0x00, 0x18 },
//Miscellaneous Configuration 1
- 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28,
- 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1,
- 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10,
- 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2,
+ { 0x00, 0xFF, SB_LPC_REG(0x94), 0xF0, 0x28 },
+ { 0x00, 0xFF, SB_LPC_REG(0x95), 0x00, 0xC1 },
+ { 0x00, 0xFF, SB_LPC_REG(0x96), 0xFF, 0x10 },
+ { 0x00, 0xFF, SB_LPC_REG(0x97), 0x00, 0xB2 },
//Voltage Change Function Enable
- 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21,
+ { 0x00, 0xFF, SB_LPC_REG(0x9F), 0x00, 0x21 },
//Internal PCIe and NM PLL Control
- 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA,
+ { 0x00, 0xFF, SB_LPC_REG(0xE2), 0x00, 0xEA },
- 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80,
- {0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}, // End of Table
+ { 0x00, 0xFF, SB_LPC_REG(0xE7), 0x00, 0x80 },
+ { 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }, // End of Table
};
void InitPMU(u8 sbchiprev)
@@ -589,7 +577,6 @@ void Stage2SbInit(void)
}
-
void init_VIA_chipset(void)
{
printk(BIOS_DEBUG, "In: init_VIA_chipset\n");
@@ -633,7 +620,6 @@ void hardwaremain(int boot_complete)
printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
#if 0
-
pci_rawwrite_config8(PCI_RAWDEV(0, 0, 4), 0xa3, 0x80);
pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0x60, 0x20);
pci_rawwrite_config8(PCI_RAWDEV(0, 17, 7), 0xE5,
@@ -656,7 +642,6 @@ void hardwaremain(int boot_complete)
printk(BIOS_INFO, "=================SB 50h=%02x \n",
pci_rawread_config8(PCI_RAWDEV(0, 0x11, 0), 0x50));
-
/* FIXME: Is there a better way to handle this? */
init_timer();
printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
@@ -690,9 +675,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV
- (0, 0x10, 4),
- x * 16 + y));
+ pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
}
printk(BIOS_INFO, "\n");
}
@@ -710,9 +693,7 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV
- (0, 0x10, 4),
- x * 16 + y));
+ pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
}
printk(BIOS_INFO, "\n");
}
@@ -722,7 +703,6 @@ void hardwaremain(int boot_complete)
post_code(0x89);
printk(BIOS_EMERG, "file '%s', line %d\n\n", __FILE__, __LINE__);
-
// pci_rawwrite_config16(PCI_RAWDEV(0, 0xf, 0), 0xBA, 0x0571);
#if 0
@@ -732,17 +712,13 @@ void hardwaremain(int boot_complete)
y = 0;
for (; y < 16; y++) {
printk(BIOS_INFO, "%02x ",
- pci_rawread_config8(PCI_RAWDEV
- (0, 0x10, 4),
- x * 16 + y));
+ pci_rawread_config8(PCI_RAWDEV (0, 0x10, 4), x * 16 + y));
}
printk(BIOS_INFO, "\n");
}
#endif
-
#if 0
-
y = pci_rawread_config8(PCI_RAWDEV(0, 0xf, 0), 0x0d);
y &= 0x0f;
y |= 0x40;
@@ -750,8 +726,6 @@ void hardwaremain(int boot_complete)
#endif
#if 0
-
-
static const d0f0pcitable[5] = { 0xD0, 0, 0, 0, 0xFD };
static const d0f2pcitable[16 * 7 + 1] = {
0x88, 0xF8, 0xEF, 0x44, 0x7C, 0x24, 0x63, 0x01, 0x00, 0x09,
@@ -911,7 +885,6 @@ void hardwaremain(int boot_complete)
0x00, 0x00, 0x48, 0x00, 0x00, 0x00,
};
-
#define OPTION_1 1
#define NOOPTION_1 1
#ifdef OPTION_1
@@ -943,24 +916,19 @@ void hardwaremain(int boot_complete)
};
#endif
-
-
u8 i;
/* error form ---- but add the chance to resume
-for(i=0;i<5;i++){
+ for(i=0;i<5;i++) {
pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i, d0f0pcitable[i+0xcb]);
}
-
-
*/
/* RO reg
-for(i=0;i<5;i++){
+ for(i=0;i<5;i++) {
pci_rawwrite_config8(PCI_RAWDEV(0, 0, 0), i+0xcb, d0f0pcitable[i]);
}
*/
-
//boot ok, resume still err in linux
#if 1
for (i = 0; i < 9; i++) {
@@ -1052,11 +1020,7 @@ for(i=0;i<5;i++){
//d15f0
-
-
-
#if 1
-
pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 0), 0x4a, 0xa2); // no affect.
pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 1), 0x4a, 0xa2);
pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 2), 0x4a, 0xa2);
@@ -1077,8 +1041,6 @@ for(i=0;i<5;i++){
pci_rawwrite_config8(PCI_RAWDEV(0, 0x10, 4), 0x6f, 0x80);
#endif
-
-
#if 1
//before (11.0)is add, s3 resume has already always dead in first resume(more frequenly), and sleep ok
// for(i=0;i<192;i++){
@@ -1094,7 +1056,6 @@ for(i=0;i<5;i++){
d11f0pcitable[i]);
}
-
for (i = 18; i < 21; i++) { //sleep ok , sleep err 1, resume
pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 0), i + 0x40,
d11f0pcitable[i]);
@@ -1225,7 +1186,6 @@ for(i=0;i<5;i++){
pci_rawwrite_config16(PCI_RAWDEV(0, 0x11, 0), 0x72,
PCI_DEVICE_ID_VIA_VX855_LPC);
-
//boot ok, resume still err in linux
for (i = 0; i < 192; i++) {
pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), i + 0x40,
@@ -1240,17 +1200,12 @@ for(i=0;i<5;i++){
pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0x88, 0x02);
pci_rawwrite_config8(PCI_RAWDEV(0, 0x11, 7), 0xe6, 0x3f);
#endif
-
pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x20);
pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x41, 0x31);
-
-
#ifdef OPTION_1
pci_rawwrite_config8(PCI_RAWDEV(0, 0x14, 0), 0x40, 0x00);
#endif
-
-
#endif
u8 i911;
@@ -1262,10 +1217,9 @@ for(i=0;i<5;i++){
i911 |= 0x01;
pci_rawwrite_config8(PCI_RAWDEV(0, 0x1, 0), 0xb0, i911);
-
#if 1
struct device *dev;
- printk(BIOS_INFO, "=========zjldump all devices...\n");
+ printk(BIOS_INFO, "========= dump all devices...\n");
for (dev = all_devices; dev; dev = dev->next) {
if (dev->path.type == DEVICE_PATH_PCI) {
printk(BIOS_DEBUG, "%s dump\n", dev_path(dev));
@@ -1274,25 +1228,14 @@ for(i=0;i<5;i++){
y = 0;
for (; y < 16; y++) {
printk(BIOS_INFO, "%02x ",
- pci_read_config8(dev,
- x *
- 16 +
- y));
+ pci_read_config8(dev, x * 16 + y));
}
printk(BIOS_INFO, "\n");
}
-
}
printk(BIOS_INFO, "\n");
}
#endif
-
-
-
-
//pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x04, 0x17, 0x17);//
-// pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
-
-
-
+ //pci_rawmodify_config8(PCI_RAWDEV(0, 0x10, 4), 0x0c, 0x08, 0xff);///
}
diff --git a/src/northbridge/via/vx800/pci_rawops.h b/src/northbridge/via/vx800/pci_rawops.h
index d0aa392a5a..7fabc3e105 100644
--- a/src/northbridge/via/vx800/pci_rawops.h
+++ b/src/northbridge/via/vx800/pci_rawops.h
@@ -37,13 +37,16 @@ struct VIA_PCI_REG_INIT_TABLE {
u8 Mask;
u8 Value;
};
+
typedef unsigned device_t_raw; /* pci and pci_mmio need to have different ways to have dev */
+#warning "FIXME: get rid of this extra copy of pci access functions."
+
/* FIXME: We need to make the coreboot to run at 64bit mode, So when read/write memory above 4G,
* We don't need to set %fs, and %gs anymore
* Before that We need to use %gs, and leave %fs to other RAM access
*/
-u8 pci_io_rawread_config8(device_t_raw dev, unsigned where)
+static u8 pci_io_rawread_config8(device_t_raw dev, unsigned where)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -56,14 +59,14 @@ u8 pci_io_rawread_config8(device_t_raw dev, unsigned where)
}
#if CONFIG_MMCONF_SUPPORT
-u8 pci_mmio_rawread_config8(device_t_raw dev, unsigned where)
+static u8 pci_mmio_rawread_config8(device_t_raw dev, unsigned where)
{
unsigned addr;
addr = dev | where;
return read8x(addr);
}
#endif
-u8 pci_rawread_config8(device_t_raw dev, unsigned where)
+static u8 pci_rawread_config8(device_t_raw dev, unsigned where)
{
#if CONFIG_MMCONF_SUPPORT
return pci_mmio_rawread_config8(dev, where);
@@ -72,7 +75,7 @@ u8 pci_rawread_config8(device_t_raw dev, unsigned where)
#endif
}
-u16 pci_io_rawread_config16(device_t_raw dev, unsigned where)
+static u16 pci_io_rawread_config16(device_t_raw dev, unsigned where)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -85,7 +88,7 @@ u16 pci_io_rawread_config16(device_t_raw dev, unsigned where)
}
#if CONFIG_MMCONF_SUPPORT
-u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where)
+static u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where)
{
unsigned addr;
addr = dev | where;
@@ -93,7 +96,7 @@ u16 pci_mmio_rawread_config16(device_t_raw dev, unsigned where)
}
#endif
-u16 pci_rawread_config16(device_t_raw dev, unsigned where)
+static u16 pci_rawread_config16(device_t_raw dev, unsigned where)
{
#if CONFIG_MMCONF_SUPPORT
return pci_mmio_rawread_config16(dev, where);
@@ -102,7 +105,7 @@ u16 pci_rawread_config16(device_t_raw dev, unsigned where)
#endif
}
-u32 pci_io_rawread_config32(device_t_raw dev, unsigned where)
+static u32 pci_io_rawread_config32(device_t_raw dev, unsigned where)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -115,7 +118,7 @@ u32 pci_io_rawread_config32(device_t_raw dev, unsigned where)
}
#if CONFIG_MMCONF_SUPPORT
-u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where)
+static u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where)
{
unsigned addr;
addr = dev | where;
@@ -123,7 +126,7 @@ u32 pci_mmio_rawread_config32(device_t_raw dev, unsigned where)
}
#endif
-u32 pci_rawread_config32(device_t_raw dev, unsigned where)
+static u32 pci_rawread_config32(device_t_raw dev, unsigned where)
{
#if CONFIG_MMCONF_SUPPORT
return pci_mmio_rawread_config32(dev, where);
@@ -132,7 +135,7 @@ u32 pci_rawread_config32(device_t_raw dev, unsigned where)
#endif
}
-void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
+static void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -145,7 +148,7 @@ void pci_io_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
}
#if CONFIG_MMCONF_SUPPORT
-void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
+static void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
{
unsigned addr;
addr = dev | where;
@@ -153,7 +156,7 @@ void pci_mmio_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
}
#endif
-void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
+static void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
{
#if CONFIG_MMCONF_SUPPORT
pci_mmio_rawwrite_config8(dev, where, value);
@@ -162,7 +165,7 @@ void pci_rawwrite_config8(device_t_raw dev, unsigned where, u8 value)
#endif
}
-void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
+static void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -175,7 +178,7 @@ void pci_io_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
}
#if CONFIG_MMCONF_SUPPORT
-void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where,
+static void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where,
u16 value)
{
unsigned addr;
@@ -184,7 +187,7 @@ void pci_mmio_rawwrite_config16(device_t_raw dev, unsigned where,
}
#endif
-void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
+static void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
{
#if CONFIG_MMCONF_SUPPORT
pci_mmio_rawwrite_config16(dev, where, value);
@@ -193,7 +196,7 @@ void pci_rawwrite_config16(device_t_raw dev, unsigned where, u16 value)
#endif
}
-void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
+static void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
{
unsigned addr;
#if CONFIG_PCI_IO_CFG_EXT == 0
@@ -206,8 +209,7 @@ void pci_io_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
}
#if CONFIG_MMCONF_SUPPORT
-void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where,
- u32 value)
+static void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
{
unsigned addr;
addr = dev | where;
@@ -215,7 +217,7 @@ void pci_mmio_rawwrite_config32(device_t_raw dev, unsigned where,
}
#endif
-void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
+static void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
{
#if CONFIG_MMCONF_SUPPORT
pci_mmio_rawwrite_config32(dev, where, value);
@@ -224,7 +226,7 @@ void pci_rawwrite_config32(device_t_raw dev, unsigned where, u32 value)
#endif
}
-void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask)
+static void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask)
{
u8 data = pci_rawread_config8(dev, where);
data &= (~mask);
@@ -232,7 +234,7 @@ void pci_rawmodify_config8(device_t_raw dev, unsigned where, u8 orval, u8 mask)
pci_rawwrite_config8(dev, where, data);
}
-void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mask)
+static void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mask)
{
u16 data = pci_rawread_config16(dev, where);
data &= (~mask);
@@ -240,7 +242,7 @@ void pci_rawmodify_config16(device_t_raw dev, unsigned where, u16 orval, u16 mas
pci_rawwrite_config16(dev, where, data);
}
-void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mask)
+static void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mask)
{
u32 data = pci_rawread_config32(dev, where);
data &= (~mask);
@@ -248,7 +250,7 @@ void pci_rawmodify_config32(device_t_raw dev, unsigned where, u32 orval, u32 mas
pci_rawwrite_config32(dev, where, data);
}
-void io_rawmodify_config8(u16 where, u8 orval, u8 mask)
+static void io_rawmodify_config8(u16 where, u8 orval, u8 mask)
{
u8 data = inb(where);
data &= (~mask);
@@ -256,8 +258,8 @@ void io_rawmodify_config8(u16 where, u8 orval, u8 mask)
outb(data, where);
}
-void via_pci_inittable(u8 chipversion,
- struct VIA_PCI_REG_INIT_TABLE *initdata)
+static void via_pci_inittable(u8 chipversion,
+ const struct VIA_PCI_REG_INIT_TABLE *initdata)
{
u8 i = 0;
device_t_raw devbxdxfx;
diff --git a/src/northbridge/via/vx800/uma_ram_setting.c b/src/northbridge/via/vx800/uma_ram_setting.c
index 71379e7ec3..72420981ff 100644
--- a/src/northbridge/via/vx800/uma_ram_setting.c
+++ b/src/northbridge/via/vx800/uma_ram_setting.c
@@ -71,7 +71,7 @@ void SetUMARam(void)
u8 ramregs[] = { 0x43, 0x42, 0x41, 0x40 };
device_t vga_dev = PCI_DEV(0, 1, 0), d0f0_dev = PCI_DEV(0, 0, 0);
u8 ByteVal, temp;
- UMARAM *pUMARamTable;
+ const UMARAM *pUMARamTable;
u16 UmaSize;
u8 SLD0F3Val, SLD1F0Val, VgaPortVal;
u32 RamSize, SLBase, Tmp;
diff --git a/src/northbridge/via/vx800/vx800_early_smbus.c b/src/northbridge/via/vx800/vx800_early_smbus.c
index 93b1461e9a..53ede31cf8 100644
--- a/src/northbridge/via/vx800/vx800_early_smbus.c
+++ b/src/northbridge/via/vx800/vx800_early_smbus.c
@@ -244,14 +244,14 @@ static void enable_smbus(void)
* be created just for it. If some other chip needs/wants it, we can
* worry about it then.
*
- * @param ctrl The memory controller and SMBus addresses.
+ * @param mem_ctrl The memory controller and SMBus addresses.
*/
-void smbus_fixup(const struct mem_controller *ctrl)
+static void smbus_fixup(const struct mem_controller *mem_ctrl)
{
int i, ram_slots, current_slot = 0;
u8 result = 0;
- ram_slots = ARRAY_SIZE(ctrl->channel0);
+ ram_slots = ARRAY_SIZE(mem_ctrl->channel0);
if (!ram_slots) {
print_err("smbus_fixup() thinks there are no RAM slots!\n");
return;
@@ -272,7 +272,7 @@ void smbus_fixup(const struct mem_controller *ctrl)
if (current_slot > ram_slots)
current_slot = 0;
- result = get_spd_data(ctrl->channel0[current_slot],
+ result = get_spd_data(mem_ctrl->channel0[current_slot],
SPD_MEMORY_TYPE);
current_slot++;
PRINT_DEBUG(".");
diff --git a/src/southbridge/via/k8t890/k8t890_early_car.c b/src/southbridge/via/k8t890/k8t890_early_car.c
index a33d6cb5f9..7c6a0ba16d 100644
--- a/src/southbridge/via/k8t890/k8t890_early_car.c
+++ b/src/southbridge/via/k8t890/k8t890_early_car.c
@@ -34,7 +34,7 @@
/* AMD K8 LDT0, LDT1, LDT2 Link Control Registers */
-static ldtreg[3] = {0x86, 0xa6, 0xc6};
+static u8 ldtreg[3] = {0x86, 0xa6, 0xc6};
/* This functions sets KT890 link frequency and width to same values as
* it has been setup on K8 side, by AMD NB init.