Overhaul speedstep code

This adds proper support for turbo and super-low-frequency modes.
Calculation of the p-states has been rewritten and moved into an
extra file speedstep.c so it can be used for non-acpi stuff like
EMTTM table generation.

It has been tested with a Core2Duo T9400 (Penryn) and a Core Duo T2300
(Yonah) processor.

Change-Id: I5f7104fc921ba67d85794254f11d486b6688ecec
Signed-off-by: Nico Huber <nico.huber@secunet.com>
Reviewed-on: http://review.coreboot.org/1658
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

4 files changed, 379 insertions, 81 deletions

diff --git a/src/cpu/intel/speedstep/Makefile.inc b/src/cpu/intel/speedstep/Makefile.inc
index c717a3304e..753dbcd6a9 100644
--- a/src/cpu/intel/speedstep/Makefile.inc
+++ b/src/cpu/intel/speedstep/Makefile.inc
@@ -1 +1 @@
-ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c
+ramstage-$(CONFIG_GENERATE_ACPI_TABLES) += acpi.c speedstep.c
diff --git a/src/cpu/intel/speedstep/acpi.c b/src/cpu/intel/speedstep/acpi.c
index 070f8d5076..910055d443 100644
--- a/src/cpu/intel/speedstep/acpi.c
+++ b/src/cpu/intel/speedstep/acpi.c
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2009 coresystems GmbH
+ *               2012 secunet Security Networks AG
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -28,7 +29,18 @@
 #include <cpu/intel/speedstep.h>
 #include <device/device.h>
 
-// XXX: PSS table values for power consumption are for Merom only
+/**
+ * @brief Returns c-state entries for this system
+ *
+ * This function is usually overwritten in mainboard code.
+ *
+ * @return Number of c-states *entries will point to.
+ */
+int __attribute__((weak)) get_cst_entries(acpi_cstate_t **entries
+					  __attribute__((unused)))
+{
+	return 0;
+}
 
 static int determine_total_number_of_cores(void)
 {
@@ -47,110 +59,133 @@ static int determine_total_number_of_cores(void)
 	return count;
 }
 
+/**
+ * @brief Returns three times the FSB clock in MHz
+ *
+ * The result of calculations with the returned value shall be divided by 3.
+ * This helps to avoid rounding errors.
+ */
 static int get_fsb(void)
 {
 	const u32 fsbcode = rdmsr(0xcd).lo & 7;
 	switch (fsbcode) {
-		case 0: return 266;
-		case 1: return 133;
-		case 2: return 200;
-		case 3: return 166;
-		case 4: return 333;
-		case 5: return 100;
-		case 6: return 400;
+		case 0: return  800; /*  / 3 == 266 */
+		case 1: return  400; /*  / 3 == 133 */
+		case 2: return  600; /*  / 3 == 200 */
+		case 3: return  500; /*  / 3 == 166 */
+		case 4: return 1000; /*  / 3 == 333 */
+		case 5: return  300; /*  / 3 == 100 */
+		case 6: return 1200; /*  / 3 == 400 */
 	}
-	printk(BIOS_DEBUG, "Warning: No supported FSB frequency. Assuming 200MHz\n");
-	return 200;
+	printk(BIOS_WARNING,
+	       "Warning: No supported FSB frequency. Assuming 200MHz\n");
+	return 600;
 }
 
-int __attribute__((weak)) get_cst_entries(acpi_cstate_t **entries __attribute__((unused)))
+static int gen_pstate_entries(const sst_table_t *const pstates,
+			      const int cpuID, const int cores_per_package,
+			      const uint8_t coordination)
 {
-	return 0;
+	int i;
+	int len, len_ps;
+	int frequency;
+
+	len = acpigen_write_empty_PCT();
+	len += acpigen_write_PSD_package(
+			cpuID, cores_per_package, coordination);
+	len += acpigen_write_name("_PSS");
+
+	const int fsb3 = get_fsb();
+	const int min_ratio2 = SPEEDSTEP_DOUBLE_RATIO(
+		pstates->states[pstates->num_states - 1]);
+	const int max_ratio2 = SPEEDSTEP_DOUBLE_RATIO(pstates->states[0]);
+	printk(BIOS_DEBUG, "clocks between %d and %d MHz.\n",
+	       (min_ratio2 * fsb3)
+		/ (pstates->states[pstates->num_states - 1].is_slfm ? 12 : 6),
+	       (max_ratio2 * fsb3) / 6);
+
+	printk(BIOS_DEBUG, "adding %x P-States between "
+			   "busratio %x and %x, ""incl. P0\n",
+	       pstates->num_states, min_ratio2 / 2, max_ratio2 / 2);
+	len_ps = acpigen_write_package(pstates->num_states);
+	for (i = 0; i < pstates->num_states; ++i) {
+		const sst_state_t *const pstate = &pstates->states[i];
+		/* Report frequency of turbo mode as that of HFM + 1. */
+		if (pstate->is_turbo)
+			frequency = (SPEEDSTEP_DOUBLE_RATIO(
+					pstates->states[i + 1]) * fsb3) / 6 + 1;
+		/* Super-LFM runs at half frequency. */
+		else if (pstate->is_slfm)
+			frequency = (SPEEDSTEP_DOUBLE_RATIO(*pstate)*fsb3)/12;
+		else
+			frequency = (SPEEDSTEP_DOUBLE_RATIO(*pstate)*fsb3)/6;
+		len_ps += acpigen_write_PSS_package(
+			frequency, pstate->power, 0, 0,
+			SPEEDSTEP_ENCODE_STATE(*pstate),
+			SPEEDSTEP_ENCODE_STATE(*pstate));
+	}
+	len_ps--;
+	acpigen_patch_len(len_ps);
+
+	len += acpigen_write_PPC(0);
+
+	len += len_ps;
+
+	return len;
 }
 
+/**
+ * @brief Generate ACPI entries for Speedstep for each cpu
+ */
 void generate_cpu_entries(void)
 {
-	int len_pr, len_ps;
+	int len_pr;
 	int coreID, cpuID, pcontrol_blk = PMB0_BASE, plen = 6;
-	msr_t msr;
 	int totalcores = determine_total_number_of_cores();
 	int cores_per_package = (cpuid_ebx(1)>>16) & 0xff;
-	int numcpus = totalcores/cores_per_package; // this assumes that all CPUs share the same layout
-	int count;
-	acpi_cstate_t *cst_entries;
+	int numcpus = totalcores/cores_per_package; /* This assumes that all
+						       CPUs share the same
+						       layout. */
+	int num_cstates;
+	acpi_cstate_t *cstates;
+	sst_table_t pstates;
+	uint8_t coordination;
+
+	printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n",
+	       numcpus, cores_per_package);
 
-	printk(BIOS_DEBUG, "Found %d CPU(s) with %d core(s) each.\n", numcpus, cores_per_package);
+	num_cstates = get_cst_entries(&cstates);
+	speedstep_gen_pstates(&pstates);
+	if (((cpuid_eax(1) >> 4) & 0xffff) == 0x1067)
+		/* For Penryn use HW_ALL. */
+		coordination = HW_ALL;
+	else
+		/* Use SW_ANY as that was the default. */
+		coordination = SW_ANY;
 
-	for (cpuID=1; cpuID <=numcpus; cpuID++) {
+	for (cpuID = 0; cpuID < numcpus; ++cpuID) {
 		for (coreID=1; coreID<=cores_per_package; coreID++) {
 			if (coreID>1) {
 				pcontrol_blk = 0;
 				plen = 0;
 			}
+
+			/* Generate processor \_PR.CPUx. */
 			len_pr = acpigen_write_processor(
-					(cpuID - 1) * cores_per_package + coreID - 1, pcontrol_blk, plen);
-			len_pr += acpigen_write_empty_PCT();
-			len_pr += acpigen_write_PSD_package(cpuID-1,cores_per_package,SW_ANY);
-			if ((count = get_cst_entries(&cst_entries)) > 0)
-				len_pr += acpigen_write_CST_package(cst_entries, count);
-			len_pr += acpigen_write_name("_PSS");
-
-			int max_states=8;
-			int busratio_step=2;
-			msr = rdmsr(IA32_PERF_STS);
-			int busratio_min=(msr.lo >> 24) & 0x1f;
-			int busratio_max=(msr.hi >> (40-32)) & 0x1f;
-			int vid_min=msr.lo & 0x3f;
-			msr = rdmsr(IA32_PLATFORM_ID);
-			int vid_max=msr.lo & 0x3f;
-			int clock_max=get_fsb()*busratio_max;
-			int clock_min=get_fsb()*busratio_min;
-			printk(BIOS_DEBUG, "clocks between %d and %d MHz.\n", clock_min, clock_max);
-#define MEROM_MIN_POWER 16000
-#define MEROM_MAX_POWER 35000
-			int power_max=MEROM_MAX_POWER;
-			int power_min=MEROM_MIN_POWER;
-
-			int num_states=(busratio_max-busratio_min)/busratio_step;
-			while (num_states > max_states-1) {
-				busratio_step <<= 1;
-				num_states >>= 1;
-			}
-			printk(BIOS_DEBUG, "adding %x P-States between busratio %x and %x, incl. P0\n",
-				num_states+1, busratio_min, busratio_max);
-			int vid_step=(vid_max-vid_min)/num_states;
-			int power_step=(power_max-power_min)/num_states;
-			int clock_step=(clock_max-clock_min)/num_states;
-			len_ps = acpigen_write_package(num_states + 1); /* For Super LFM, this must
-									   be increases by another one. */
-			len_ps += acpigen_write_PSS_package(
-					clock_max /*mhz*/, power_max /*mW*/, 0 /*lat1*/, 0 /*lat2*/,
-					(busratio_max << 8) | vid_max /*control*/,
-					(busratio_max << 8) | vid_max /*status*/);
-
-			int current_busratio=busratio_min+((num_states-1)*busratio_step);
-			int current_vid=vid_min+((num_states-1)*vid_step);
-			int current_power=power_min+((num_states-1)*power_step);
-			int current_clock=clock_min+((num_states-1)*clock_step);
-			int i;
-			for (i=0;i<num_states; i++) {
-				len_ps += acpigen_write_PSS_package(
-						current_clock /*mhz*/, current_power /*mW*/,
-						0 /*lat1*/, 0 /*lat2*/,
-						(current_busratio << 8) | current_vid /*control*/,
-						(current_busratio << 8) | current_vid /*status*/);
-				current_busratio -= busratio_step;
-				current_vid -= vid_step;
-				current_power -= power_step;
-				current_clock -= clock_step;
-			}
-			len_ps--;
-			acpigen_patch_len(len_ps);
-			len_pr += acpigen_write_PPC(0);
-			len_pr += len_ps;
+					cpuID * cores_per_package + coreID - 1,
+					pcontrol_blk, plen);
+
+			/* Generate p-state entries. */
+			len_pr += gen_pstate_entries(&pstates, cpuID,
+					cores_per_package, coordination);
+
+			/* Generate c-state entries. */
+			if (num_cstates > 0)
+				len_pr += acpigen_write_CST_package(
+							cstates, num_cstates);
+
 			len_pr--;
 			acpigen_patch_len(len_pr);
 		}
 	}
 }
-
diff --git a/src/cpu/intel/speedstep/speedstep.c b/src/cpu/intel/speedstep/speedstep.c
new file mode 100644
index 0000000000..f2cff04dae
--- /dev/null
+++ b/src/cpu/intel/speedstep/speedstep.c
@@ -0,0 +1,189 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2012 secunet Security Networks AG
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ */
+
+#include <types.h>
+#include <string.h>
+#include <arch/cpu.h>
+#include <cpu/x86/msr.h>
+#include <console/console.h>
+#include <cpu/intel/speedstep.h>
+
+/**
+ * @brief Gather speedstep limits for current processor
+ *
+ * At least power limits are processor type specific. Penryn introduced half
+ * steps in bus ratios. Don't know about Atom processors.
+ */
+static void speedstep_get_limits(sst_params_t *const params)
+{
+	msr_t msr;
+
+	const uint16_t cpu_id = (cpuid_eax(1) >> 4) & 0xffff;
+	const uint32_t state_mask =
+		/* Penryn supports non integer (i.e. half) ratios. */
+		((cpu_id == 0x1067) ? SPEEDSTEP_RATIO_NONINT : 0)
+		| SPEEDSTEP_RATIO_VALUE_MASK | SPEEDSTEP_VID_MASK;
+
+	/* Initialize params to zero. */
+	memset(params, '\0', sizeof(*params));
+
+	/* Read Super-LFM parameters. */
+	if (((rdmsr(MSR_EXTENDED_CONFIG).lo >> 27) & 3) == 3) {/*supported and
+								 enabled bits */
+		msr = rdmsr(MSR_FSB_CLOCK_VCC);
+		params->slfm = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+		params->slfm.dynfsb	= 1;
+		params->slfm.is_slfm	= 1;
+	}
+
+	/* Read normal minimum parameters. */
+	msr = rdmsr(MSR_THERM2_CTL);
+	params->min = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+
+	/* Read normal maximum parameters. */
+	/* Newer CPUs provide the normal maximum settings in
+	   IA32_PLATFORM_ID. The values in IA32_PERF_STS change
+	   when using turbo mode. */
+	msr = rdmsr(IA32_PLATFORM_ID);
+	params->max = SPEEDSTEP_STATE_FROM_MSR(msr.lo, state_mask);
+	if (cpu_id == 0x006e) {
+		/* Looks like Yonah CPUs don't have the frequency ratio in
+		   IA32_PLATFORM_ID. Use IA32_PERF_STS instead, the reading
+		   should be reliable as those CPUs don't have turbo mode. */
+		msr = rdmsr(IA32_PERF_STS);
+		params->max.ratio = (msr.hi & SPEEDSTEP_RATIO_VALUE_MASK)
+						>> SPEEDSTEP_RATIO_SHIFT;
+	}
+
+	/* Read turbo parameters. */
+	msr = rdmsr(MSR_FSB_CLOCK_VCC);
+	if ((msr.hi & (1 << (63 - 32))) &&
+		/* supported and */
+			!(rdmsr(IA32_MISC_ENABLES).hi & (1 << (38 - 32)))) {
+			/* not disabled */
+		params->turbo = SPEEDSTEP_STATE_FROM_MSR(msr.hi, state_mask);
+		params->turbo.is_turbo = 1;
+	}
+
+	/* Set power limits by processor type. */
+	/* Defined values match the normal voltage versions only. But
+	   they are only a hint for OSPM, so this should not hurt much. */
+	switch (cpu_id) {
+	case 0x006e:
+		/* Yonah */
+		params->min.power	= SPEEDSTEP_MIN_POWER_YONAH;
+		params->max.power	= SPEEDSTEP_MAX_POWER_YONAH;
+		break;
+	case 0x1067:
+		/* Penryn */
+		params->slfm.power	= SPEEDSTEP_SLFM_POWER_PENRYN;
+		params->min.power	= SPEEDSTEP_MIN_POWER_PENRYN;
+		params->max.power	= SPEEDSTEP_MAX_POWER_PENRYN;
+		params->turbo.power	= SPEEDSTEP_MAX_POWER_PENRYN;
+		break;
+	case 0x006f:
+		/* Merom */
+	default:
+		/* Use Merom values by default (as before). */
+		params->slfm.power	= SPEEDSTEP_SLFM_POWER_MEROM;
+		params->min.power	= SPEEDSTEP_MIN_POWER_MEROM;
+		params->max.power	= SPEEDSTEP_MAX_POWER_MEROM;
+		params->turbo.power	= SPEEDSTEP_MAX_POWER_MEROM;
+		break;
+	}
+}
+
+/**
+ * @brief Generate full p-states table from processor parameters
+ *
+ * This is generic code and should work at least for Merom and Penryn
+ * processors. It is used to generate acpi tables and configure EMTTM.
+ */
+void speedstep_gen_pstates(sst_table_t *const table)
+{
+	sst_params_t params;
+	/* Gather speedstep limits. */
+	speedstep_get_limits(&params);
+
+
+	/*\ First, find the number of normal states: \*/
+
+	/* Calculate with doubled values to work
+	   around non-integer (.5) bus ratios. */
+	const int power_diff2	= (params.max.power - params.min.power) * 2;
+	const int vid_diff2	= (params.max.vid - params.min.vid) * 2;
+	const int max_ratio2	= SPEEDSTEP_DOUBLE_RATIO(params.max);
+	const int min_ratio2	= SPEEDSTEP_DOUBLE_RATIO(params.min);
+	const int ratio_diff2	= max_ratio2 - min_ratio2;
+	/* Calculate number of normal states (LFM to HFM, min to max). */
+	/* Increase step size, until all states fit into the table.
+	   (Note: First try should always work, if
+	    SPEEDSTEP_MAX_NORMAL_STATES is set correctly.) */
+	int states, step2 = 0;
+	do {
+		step2 += 2 * 2; /* Must be a multiple of 2 (doubled). */
+		states = ratio_diff2 / step2 + 1;
+	} while (states > SPEEDSTEP_MAX_NORMAL_STATES);
+	if (step2 > 4)
+		printk(BIOS_INFO, "Enhanced Speedstep processor with "
+				  "more than %d possible p-states.\n",
+			SPEEDSTEP_MAX_NORMAL_STATES);
+	if (states < 2) /* Report at least two normal states. */
+		states = 2;
+
+
+	/*\ Now, fill the table: \*/
+
+	table->num_states = 0;
+
+	/* Add turbo state if supported. */
+	if (params.turbo.is_turbo)
+		table->states[table->num_states++] = params.turbo;
+
+	/* Add HFM first. */
+	table->states[table->num_states] = params.max;
+	/* Work around HFM and LFM having the same bus ratio. */
+	if ((params.max.dynfsb == params.min.dynfsb) &&
+			(params.max.nonint == params.min.nonint) &&
+			(params.max.ratio == params.min.ratio))
+		table->states[table->num_states].vid = params.min.vid;
+	++table->num_states;
+	--states;
+
+	/* Now, add all other normal states based on LFM (min). */
+	const int power_step	= (power_diff2 / states) / 2;
+	const int vid_step	= (vid_diff2 / states) / 2;
+	const int ratio_step    = step2 / 2;
+	int power   = params.min.power + (states - 1) * power_step;
+	int vid	    = params.min.vid   + (states - 1) * vid_step;
+	int ratio   = params.min.ratio + (states - 1) * ratio_step;
+	for (; states > 0; --states) {
+		table->states[table->num_states++] =
+			(sst_state_t){ 0, 0, ratio, vid, 0, 0, power };
+		power	-= power_step;
+		vid	-= vid_step;
+		ratio	-= ratio_step;
+	}
+
+	/* At last, add Super-LFM state if supported. */
+	if (params.slfm.is_slfm)
+		table->states[table->num_states++] = params.slfm;
+}
diff --git a/src/include/cpu/intel/speedstep.h b/src/include/cpu/intel/speedstep.h
index c3cd2d2efc..b5d1d68cda 100644
--- a/src/include/cpu/intel/speedstep.h
+++ b/src/include/cpu/intel/speedstep.h
@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2007-2009 coresystems GmbH
+ *               2012 secunet Security Networks AG
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -19,6 +20,11 @@
  * MA 02110-1301 USA
  */
 
+#ifndef CPU_INTEL_SPEEDSTEP_H
+#define CPU_INTEL_SPEEDSTEP_H
+
+#include <stdint.h>
+
 /* Magic value used to locate speedstep configuration in the device tree */
 #define SPEEDSTEP_APIC_MAGIC 0xACAC
 
@@ -39,3 +45,71 @@
 #define IA32_PERF_CTL     0x199
 #define MSR_THERM2_CTL    0x19D
 #define IA32_MISC_ENABLES 0x1A0
+#define MSR_FSB_CLOCK_VCC	0xce
+#define MSR_EXTENDED_CONFIG	0xee
+
+
+typedef struct {
+	uint8_t dynfsb : 1; /* whether this is SLFM */
+	uint8_t nonint : 1; /* add .5 to ratio */
+	uint8_t ratio : 6;
+	uint8_t vid;
+	uint8_t is_turbo;
+	uint8_t is_slfm;
+	uint32_t power;
+} sst_state_t;
+#define SPEEDSTEP_RATIO_SHIFT		8
+#define SPEEDSTEP_RATIO_DYNFSB_SHIFT	(7 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_DYNFSB		(1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT_SHIFT	(6 + SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_RATIO_NONINT		(1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
+#define SPEEDSTEP_RATIO_VALUE_MASK	(0x1f << SPEEDSTEP_RATIO_SHIFT)
+#define SPEEDSTEP_VID_MASK		0x3f
+#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((sst_state_t){		\
+		0, /* dynfsb won't be read. */				\
+		((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0,	\
+		(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK)		\
+					>> SPEEDSTEP_RATIO_SHIFT),	\
+		(val & mask) & SPEEDSTEP_VID_MASK,			\
+		0, /* not turbo by default */				\
+		0, /* not slfm by default */				\
+		0  /* power is hardcoded in software. */		\
+	})
+#define SPEEDSTEP_ENCODE_STATE(state)	(				\
+	((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) |	\
+	((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) |	\
+	((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) |		\
+	((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
+#define SPEEDSTEP_DOUBLE_RATIO(state)	(				\
+	((uint8_t)(state).ratio * 2) + (state).nonint)
+
+typedef struct {
+	sst_state_t slfm;
+	sst_state_t min;
+	sst_state_t max;
+	sst_state_t turbo;
+} sst_params_t;
+
+/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
+   processor is 14, the lowest is always 6. This makes 5 states with the
+   minimal step width of 2. With turbo mode and super LFM we have at most 7. */
+#define SPEEDSTEP_MAX_NORMAL_STATES	5
+#define SPEEDSTEP_MAX_STATES		(SPEEDSTEP_MAX_NORMAL_STATES + 2)
+typedef struct {
+	/* Table of p-states for EMTTM and ACPI by decreasing performance. */
+	sst_state_t states[SPEEDSTEP_MAX_STATES];
+	int num_states;
+} sst_table_t;
+
+void speedstep_gen_pstates(sst_table_t *);
+
+#define SPEEDSTEP_MAX_POWER_YONAH	31000
+#define SPEEDSTEP_MIN_POWER_YONAH	13100
+#define SPEEDSTEP_MAX_POWER_MEROM	35000
+#define SPEEDSTEP_MIN_POWER_MEROM	25000
+#define SPEEDSTEP_SLFM_POWER_MEROM	12000
+#define SPEEDSTEP_MAX_POWER_PENRYN	35000
+#define SPEEDSTEP_MIN_POWER_PENRYN	15000
+#define SPEEDSTEP_SLFM_POWER_PENRYN	12000
+
+#endif /* CPU_INTEL_SPEEDSTEP_H */