Remove non-ascii & unprintable characters

These non-ascii & unprintable characters aren't needed.

Change-Id: I129f729f66d6a692de729d76971f7deb7a19c254
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/15977
Tested-by: build bot (Jenkins)
Reviewed-by: Omar Pakker
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

46 files changed, 114 insertions, 114 deletions

diff --git a/src/arch/x86/acpigen.c b/src/arch/x86/acpigen.c
index d37568c92f..915faac802 100644
--- a/src/arch/x86/acpigen.c
+++ b/src/arch/x86/acpigen.c
@@ -222,9 +222,9 @@ void acpigen_write_string(const char *string)
 
 /*
  * The naming conventions for ACPI namespace names are a bit tricky as
- * each element has to be 4 chars wide (»All names are a fixed 32 bits.«)
- * and »By convention, when an ASL compiler pads a name shorter than 4
- * characters, it is done so with trailing underscores (‘_’).«.
+ * each element has to be 4 chars wide ("All names are a fixed 32 bits.")
+ * and "By convention, when an ASL compiler pads a name shorter than 4
+ * characters, it is done so with trailing underscores ('_')".
  *
  * Check sections 5.3, 18.2.2 and 18.4 of ACPI spec 3.0 for details.
  */
diff --git a/src/arch/x86/smbios.c b/src/arch/x86/smbios.c
index 21ea2c1f4f..9df95e99f8 100644
--- a/src/arch/x86/smbios.c
+++ b/src/arch/x86/smbios.c
@@ -16,7 +16,7 @@
  */
 
 /*
- * Standard Manufacturer’s Identification Code
+ * Standard Manufacturer's Identification Code
  * JEP106AS (Revision of JEP106AR, October 2015)
  * MAY 2016
  * http://www.jedec.org/standards-documents/results/JEP106AS
diff --git a/src/cpu/allwinner/a10/twi.c b/src/cpu/allwinner/a10/twi.c
index 69e08ca7f4..3ef5606d27 100644
--- a/src/cpu/allwinner/a10/twi.c
+++ b/src/cpu/allwinner/a10/twi.c
@@ -14,9 +14,9 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * Setup helpers for Two Wire Interface (TWI) (I²C) Allwinner CPUs
+ * Setup helpers for Two Wire Interface (TWI) (I2C) Allwinner CPUs
  *
- * Only functionality for I²C master is provided.
+ * Only functionality for I2C master is provided.
  * Largely based on the uboot-sunxi code.
  */
 
@@ -63,7 +63,7 @@ void a1x_twi_init(u8 bus, u32 speed_hz)
 
 	configure_clock(twi, speed_hz);
 
-	/* Enable the I²C bus */
+	/* Enable the I2C bus */
 	write32(&twi->ctl, TWI_CTL_BUS_EN);
 	/* Issue soft reset */
 	write32(&twi->reset, 1);
diff --git a/src/cpu/allwinner/a10/twi.h b/src/cpu/allwinner/a10/twi.h
index a8ebdf345d..1a3341958a 100644
--- a/src/cpu/allwinner/a10/twi.h
+++ b/src/cpu/allwinner/a10/twi.h
@@ -13,7 +13,7 @@
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
- * Definitions Two Wire Interface (TWI) (I²C) Allwinner CPUs
+ * Definitions Two Wire Interface (TWI) (I2C) Allwinner CPUs
  */
 
 #ifndef CPU_ALLWINNER_A10_TWI_H
diff --git a/src/cpu/intel/slot_1/l2_cache.c b/src/cpu/intel/slot_1/l2_cache.c
index 2699d9256a..7c127b3fb0 100644
--- a/src/cpu/intel/slot_1/l2_cache.c
+++ b/src/cpu/intel/slot_1/l2_cache.c
@@ -339,7 +339,7 @@ int test_l2_address_alias(u32 address1, u32 address2,
 
 /* Calculates the L2 cache size.
  *
- * Reference: Intel(R) 64 and IA-32 Architectures Software Developer�s Manual
+ * Reference: Intel(R) 64 and IA-32 Architectures Software Developer's Manual
  *            Volume 3B: System Programming Guide, Part 2, Intel pub. 253669, pg. B-172.
  *
  */
diff --git a/src/drivers/xpowers/axp209/axp209.c b/src/drivers/xpowers/axp209/axp209.c
index f36c506a2d..de11fbe1bd 100644
--- a/src/drivers/xpowers/axp209/axp209.c
+++ b/src/drivers/xpowers/axp209/axp209.c
@@ -44,7 +44,7 @@ enum registers {
  * in one transaction.
  * These return the number of bytes read/written, or an error code. In this
  * case, they return 1 on success, or an error code otherwise. This is done to
- * work with I²C drivers that return either 0 on success or the number of bytes
+ * work with I2C drivers that return either 0 on success or the number of bytes
  * actually transferred.
  */
 static int axp209_read(u8 bus, u8 reg, u8 *val)
@@ -62,9 +62,9 @@ static int axp209_write(u8 bus, u8 reg, u8 val)
 }
 
 /**
- * \brief Identify and initialize an AXP209 on the I²C bus
+ * \brief Identify and initialize an AXP209 on the I2C bus
  *
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on if an AXP209 is found, or an error code otherwise.
  */
 enum cb_err axp209_init(u8 bus)
@@ -91,7 +91,7 @@ enum cb_err axp209_init(u8 bus)
  * Valid values are between 700mV and 2275mV
  *
  * @param[in] millivolts voltage in mV units.
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success,
  *	   CB_ERR_ARG if voltage is out of range, or an error code otherwise.
  */
@@ -118,7 +118,7 @@ enum cb_err axp209_set_dcdc2_voltage(u8 bus, u16 millivolts)
  * Valid values are between 700mV and 3500mV
  *
  * @param[in] millivolts voltage in mV units.
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success,
  *	   CB_ERR_ARG if voltage is out of range, or an error code otherwise.
  */
@@ -145,7 +145,7 @@ enum cb_err axp209_set_dcdc3_voltage(u8 bus, u16 millivolts)
  * Valid values are between 700mV and 3300mV
  *
  * @param[in] millivolts voltage in mV units.
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success,
  *	   CB_ERR_ARG if voltage is out of range, or an error code otherwise.
  */
@@ -179,7 +179,7 @@ enum cb_err axp209_set_ldo2_voltage(u8 bus, u16 millivolts)
  * 2250mV, but hardware samples go as high as 3500mV.
  *
  * @param[in] millivolts voltage in mV units.
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success,
  *	   CB_ERR_ARG if voltage is out of range, or an error code otherwise.
  */
@@ -207,7 +207,7 @@ enum cb_err axp209_set_ldo3_voltage(u8 bus, u16 millivolts)
  * Valid values are between 1250V and 3300mV
  *
  * @param[in] millivolts voltage in mV units.
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success,
  *	   CB_ERR_ARG if voltage is out of range, or an error code otherwise.
  */
@@ -290,7 +290,7 @@ static enum cb_err set_rail(u8 bus, int idx, u16 mv)
  * reconfigured, and retain its powerup voltage.
  *
  * @param[in] cfg pointer to @ref drivers_xpowers_axp209_config structure
- * @param[in] bus I²C bus to which the AXP209 is connected
+ * @param[in] bus I2C bus to which the AXP209 is connected
  * @return CB_SUCCES on success, or an error code otherwise.
  */
 enum cb_err axp209_set_voltages(u8 bus, const struct
diff --git a/src/ec/quanta/ene_kb3940q/acpi/battery.asl b/src/ec/quanta/ene_kb3940q/acpi/battery.asl
index 4467797126..bcc9a98f34 100644
--- a/src/ec/quanta/ene_kb3940q/acpi/battery.asl
+++ b/src/ec/quanta/ene_kb3940q/acpi/battery.asl
@@ -67,7 +67,7 @@ Device (BATX)
 		Store (Zero, BFWK)
 	}
 
-	// Device insertion/removal control method that returns a device’s status.
+	// Device insertion/removal control method that returns a device's status.
 	// Power resource object that evaluates to the current on or off state of
 	// the Power Resource.
 	Method (_STA, 0, Serialized)
diff --git a/src/lib/tpm_error_messages.h b/src/lib/tpm_error_messages.h
index 3b0f48cb59..279bc2bbb4 100644
--- a/src/lib/tpm_error_messages.h
+++ b/src/lib/tpm_error_messages.h
@@ -158,7 +158,7 @@ and locality modifier not part of command transport" },
 { "TPM_BAD_LOCALITY", TPM_E_BASE + 61,
 "The locality is incorrect for the attempted operation" },
 { "TPM_READ_ONLY", TPM_E_BASE + 62,
-"The NV area is read only and canât be written to" },
+"The NV area is read only and can't be written to" },
 { "TPM_PER_NOWRITE", TPM_E_BASE + 63,
 "There is no protection on the write to the NV area" },
 { "TPM_FAMILYCOUNT", TPM_E_BASE + 64,
@@ -208,7 +208,7 @@ by the TPM Owner" },
 "The atomic process indicated by the submitted DAA command is not\n\
 the expected process" },
 { "TPM_DAA_ISSUER_VALIDITY", TPM_E_BASE + 86,
-"The issuerâs validity check has detected an inconsistency" },
+"The issuer's validity check has detected an inconsistency" },
 { "TPM_DAA_WRONG_W", TPM_E_BASE + 87,
 "The consistency check on w has failed" },
 { "TPM_BAD_HANDLE", TPM_E_BASE + 88,
diff --git a/src/mainboard/apple/macbook21/romstage.c b/src/mainboard/apple/macbook21/romstage.c
index 296f8986b3..4d49e89326 100644
--- a/src/mainboard/apple/macbook21/romstage.c
+++ b/src/mainboard/apple/macbook21/romstage.c
@@ -85,8 +85,8 @@ static void ich7_enable_lpc(void)
 	// Macbook21: 0x0010 == 00000000 00010000
 	// Bit 9:8    LPT Decode Range. This field determines which range to
 	//            decode for the LPT Port.
-	//            00 = 378h ­ 37Fh and 778h ­ 77Fh
-	//            10 = 3BCh ­ 3BEh and 7BCh ­ 7BEh
+	//            00 = 378h - 37Fh and 778h - 77Fh
+	//            10 = 3BCh - 3BEh and 7BCh - 7BEh
 	pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0010);
 
 	// LPC_EN--LPC I/F Enables Register
diff --git a/src/mainboard/cubietech/cubieboard/devicetree.cb b/src/mainboard/cubietech/cubieboard/devicetree.cb
index 65ea5ff38c..033a89e628 100644
--- a/src/mainboard/cubietech/cubieboard/devicetree.cb
+++ b/src/mainboard/cubietech/cubieboard/devicetree.cb
@@ -1,7 +1,7 @@
 chip cpu/allwinner/a10
 	device cpu_cluster 0 on end
 
-	chip drivers/xpowers/axp209	# AXP209 is on I²C 0
+	chip drivers/xpowers/axp209	# AXP209 is on I2C 0
 		device i2c 0x34 on end
 		register "dcdc2_voltage_mv" = "1400"	# Vcore
 		register "dcdc3_voltage_mv" = "1250"	# DLL Vdd
diff --git a/src/mainboard/google/cosmos/chromeos.c b/src/mainboard/google/cosmos/chromeos.c
index ca80432a93..a405cf0220 100644
--- a/src/mainboard/google/cosmos/chromeos.c
+++ b/src/mainboard/google/cosmos/chromeos.c
@@ -1,4 +1,4 @@
-/*
+/*
  * This file is part of the coreboot project.
  *
  * Copyright 2014 Google Inc.
diff --git a/src/mainboard/google/parrot/ec.h b/src/mainboard/google/parrot/ec.h
index 200750a0e9..e389a77602 100644
--- a/src/mainboard/google/parrot/ec.h
+++ b/src/mainboard/google/parrot/ec.h
@@ -49,8 +49,8 @@
  * AC power plug-out  C8h
  * Modem Ring In  CAh
  * PME signal active  CEh
- * Acer Hotkey Function – Make event D5h
- * Acer Hotkey Function – Break event D6h
+ * Acer Hotkey Function - Make event D5h
+ * Acer Hotkey Function - Break event D6h
  */
 
 #ifndef __ACPI__
diff --git a/src/mainboard/google/purin/chromeos.c b/src/mainboard/google/purin/chromeos.c
index 0bd489a1e8..e6843a1489 100644
--- a/src/mainboard/google/purin/chromeos.c
+++ b/src/mainboard/google/purin/chromeos.c
@@ -1,4 +1,4 @@
-/*
+/*
  * This file is part of the coreboot project.
  *
  * Copyright 2015 Google Inc.
diff --git a/src/mainboard/google/stout/ec.c b/src/mainboard/google/stout/ec.c
index 004c492ed9..a7006d9d64 100644
--- a/src/mainboard/google/stout/ec.c
+++ b/src/mainboard/google/stout/ec.c
@@ -48,10 +48,10 @@ void stout_ec_init(void)
 	 * Set USB Power off in S3 (enabled in S3 path if requested in gnvs)
 	 * Bit0 of 0x0D/Bit0 of 0x26
 	 * 0/0 All USB port off
-	 * 1/0 USB on, all USB port didn’t support wake up
+	 * 1/0 USB on, all USB port didn't support wake up
 	 * 0/1 USB on, yellow port support wake up charge, but may not support
 	 *             charge smart phone.
-	 * 1/1 USB on, yellow port in AUTO mode and didn’t support wake up system.
+	 * 1/1 USB on, yellow port in AUTO mode and didn't support wake up system.
 	 */
 	ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) & 0xE);
 	ec_write(EC_USB_S3_EN, ec_read(EC_USB_S3_EN) & 0xE);
diff --git a/src/mainboard/google/stout/mainboard_smi.c b/src/mainboard/google/stout/mainboard_smi.c
index 7fed9cf964..e25c576ba1 100644
--- a/src/mainboard/google/stout/mainboard_smi.c
+++ b/src/mainboard/google/stout/mainboard_smi.c
@@ -58,10 +58,10 @@ void mainboard_smi_sleep(u8 slp_typ)
 	 * Tell the EC to Enable USB power for S3 if requested.
 	 * Bit0 of 0x0D/Bit0 of 0x26
 	 * 0/0 All USB port off
-	 * 1/0 USB on, all USB port didn’t support wake up
+	 * 1/0 USB on, all USB port didn't support wake up
 	 * 0/1 USB on, yellow port support wake up charge, but may not support
 	 *             charge smart phone.
-	 * 1/1 USB on, yellow port in AUTO mode and didn’t support wake up system.
+	 * 1/1 USB on, yellow port in AUTO mode and didn't support wake up system.
 	 */
 	if (smm_get_gnvs()->s3u0 != 0 || smm_get_gnvs()->s3u1 != 0) {
 		ec_write(EC_PERIPH_CNTL_3, ec_read(EC_PERIPH_CNTL_3) | 0x00);
diff --git a/src/mainboard/google/veyron/chromeos.c b/src/mainboard/google/veyron/chromeos.c
index 42be8ca5ff..b73062295a 100644
--- a/src/mainboard/google/veyron/chromeos.c
+++ b/src/mainboard/google/veyron/chromeos.c
@@ -1,4 +1,4 @@
-/*
+/*
  * This file is part of the coreboot project.
  *
  * Copyright 2014 Rockchip Inc.
diff --git a/src/mainboard/google/veyron_rialto/chromeos.c b/src/mainboard/google/veyron_rialto/chromeos.c
index 74f84d4525..ac1afd9911 100644
--- a/src/mainboard/google/veyron_rialto/chromeos.c
+++ b/src/mainboard/google/veyron_rialto/chromeos.c
@@ -1,4 +1,4 @@
-/*
+/*
  * This file is part of the coreboot project.
  *
  * Copyright 2014 Rockchip Inc.
diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c
index f01420f928..41811e4e87 100644
--- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c
+++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c
@@ -49,7 +49,7 @@
 #define PANEL_TABLE_ID8 	8 // 1280x1024_108MHz
 #define PANEL_TABLE_ID9 	9 // 1366x768_86MHz_chimei_V32B1L01
 
-// Callback Sub-Function 05h – Select Boot-up TV Standard
+// Callback Sub-Function 05h - Select Boot-up TV Standard
 #define TV_MODE_00	0x00	/* NTSC */
 #define TV_MODE_01	0x01	/* PAL */
 #define TV_MODE_02	0x02	/* PALM */
diff --git a/src/mainboard/technexion/tim5690/mainboard.c b/src/mainboard/technexion/tim5690/mainboard.c
index 0362b90c1a..f84b7a0083 100644
--- a/src/mainboard/technexion/tim5690/mainboard.c
+++ b/src/mainboard/technexion/tim5690/mainboard.c
@@ -40,7 +40,7 @@
 #define LCD_PANEL_ID_04 0x04	/* 1680x1050, 24 bits, 2 channels */
 #define LCD_PANEL_ID_05 0x05	/* 1920x1200, 24 bits, 2 channels */
 #define LCD_PANEL_ID_06 0x06	/* 1920x1080, 24 bits, 2 channels */
-//Callback Sub-Function 05h – Select Boot-up TV Standard
+//Callback Sub-Function 05h - Select Boot-up TV Standard
 #define TV_MODE_00	0x00	/* NTSC */
 #define TV_MODE_01	0x01	/* PAL */
 #define TV_MODE_02	0x02	/* PALM */
diff --git a/src/mainboard/via/epia-m700/romstage.c b/src/mainboard/via/epia-m700/romstage.c
index 9f2c14e3bf..83af4260f2 100644
--- a/src/mainboard/via/epia-m700/romstage.c
+++ b/src/mainboard/via/epia-m700/romstage.c
@@ -187,7 +187,7 @@ static const struct VIA_PCI_REG_INIT_TABLE mNbStage1InitTbl[] = {
 	/* VT3409 no PCI-E */
 	{ 0x00, 0xFF, NB_APIC_REG(0x61), 0xFF, 0x0E },	// Set Exxxxxxx as pcie mmio config range
 	{ 0x00, 0xFF, NB_APIC_REG(0x60), 0xF4, 0x0B },	// Support extended cfg address of pcie
-	// { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control
+	// { 0x00, 0xFF, NB_APIC_REG(0x42), 0xF9, 0x02 }, // APIC Interrupt((BT_INTR)) Control
 	// Set ROMSIP value by software
 
 	/*
diff --git a/src/northbridge/amd/amdfam10/acpi.c b/src/northbridge/amd/amdfam10/acpi.c
index 960d468eed..d4ad9a409d 100644
--- a/src/northbridge/amd/amdfam10/acpi.c
+++ b/src/northbridge/amd/amdfam10/acpi.c
@@ -129,7 +129,7 @@ static unsigned long acpi_fill_srat(unsigned long current)
 
 static unsigned long acpi_fill_slit(unsigned long current)
 {
-	/* Implement SLIT algorithm in BKDG Rev. 3.62 § 2.3.6.1
+	/* Implement SLIT algorithm in BKDG Rev. 3.62 Section 2.3.6.1
 	 * Fill the first 8 bytes with the node number,
 	 * then fill the next num*num byte with the distance,
 	 * Distance entries vary with topology; the local node
diff --git a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
index 2501410985..8974a08e6e 100644
--- a/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
+++ b/src/northbridge/amd/amdmct/mct_ddr3/mctdqs_d.c
@@ -1541,7 +1541,7 @@ static uint8_t TrainDQSRdWrPos_D_Fam15(struct MCTStatStruc *pMCTstat,
 						printk(BIOS_DEBUG, "+");
 					} else {
 						if (read_iter < 16)
-							printk(BIOS_DEBUG, "°");
+							printk(BIOS_DEBUG, ":");
 						else
 							printk(BIOS_DEBUG, ".");
 					}
diff --git a/src/northbridge/intel/e7505/raminit.c b/src/northbridge/intel/e7505/raminit.c
index b48328f1b7..7734ca50d1 100644
--- a/src/northbridge/intel/e7505/raminit.c
+++ b/src/northbridge/intel/e7505/raminit.c
@@ -1007,10 +1007,10 @@ static inline void __attribute__((always_inline))
 		unsigned int a1, a2;
 		asm volatile("movd %%xmm2, %%eax;" : "=a" (a1) ::);
 		asm volatile("movd %%xmm3, %%eax;" : "=a" (a2) ::);
-		printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
+		printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
 		asm volatile("movd %%xmm0, %%eax;" : "=a" (a1) ::);
 		asm volatile("movd %%xmm1, %%eax;" : "=a" (a2) ::);
-		printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
+		printk(BIOS_DEBUG, "return EIP @ %x = %x\n", a1, a2);
 #endif
 	}
 
diff --git a/src/northbridge/intel/gm45/pcie.c b/src/northbridge/intel/gm45/pcie.c
index 30ceb364e6..cc1fde74f8 100644
--- a/src/northbridge/intel/gm45/pcie.c
+++ b/src/northbridge/intel/gm45/pcie.c
@@ -289,7 +289,7 @@ static void setup_aspm(const stepping_t stepping, const int peg_enabled)
 	 * Maybe we just have to advertise ASPM through LCAP[11:10]
 	 * (LCAP[17:15] == 010b is the default, will be locked, as it's R/WO),
 	 * set 0x208[31:24,23:22] to zero, 0x224[24:21] = 1 and let the
-	 * generic ASPM code do the rest? – Nico
+	 * generic ASPM code do the rest? - Nico
 	 */
 	/* TODO: Prepare PEG for ASPM. */
 }
diff --git a/src/northbridge/intel/i82830/smihandler.c b/src/northbridge/intel/i82830/smihandler.c
index 12da69830e..667f874c42 100644
--- a/src/northbridge/intel/i82830/smihandler.c
+++ b/src/northbridge/intel/i82830/smihandler.c
@@ -166,11 +166,11 @@ static void mbi_call(u8 subf, banner_id_t *banner_id)
 	}
 	case 0x0002:
 		printk(BIOS_DEBUG, "|- MBI_Attach\n");
-		printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
+		printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
 		break;
 	case 0x0003:
 		printk(BIOS_DEBUG, "|- MBI_Detach\n");
-		printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
+		printk(BIOS_DEBUG, "|  |- Not Implemented!\n");
 		break;
 	case 0x0201: {
 		obj_header_t *obj_header = (obj_header_t *)banner_id;
diff --git a/src/northbridge/intel/sandybridge/report_platform.c b/src/northbridge/intel/sandybridge/report_platform.c
index aa758c8626..39bff65b8b 100644
--- a/src/northbridge/intel/sandybridge/report_platform.c
+++ b/src/northbridge/intel/sandybridge/report_platform.c
@@ -62,7 +62,7 @@ static struct {
 	/* 6-series PCI ids from
 	 * Intel® 6 Series Chipset and
 	 * Intel® C200 Series Chipset
-	 * Specification Update – NDA
+	 * Specification Update - NDA
 	 * October 2013
 	 * CDI / IBP#: 440377
 	 */
diff --git a/src/northbridge/via/vx900/early_host_bus_ctl.c b/src/northbridge/via/vx900/early_host_bus_ctl.c
index 64680c5e28..159b2a4273 100644
--- a/src/northbridge/via/vx900/early_host_bus_ctl.c
+++ b/src/northbridge/via/vx900/early_host_bus_ctl.c
@@ -20,9 +20,9 @@ static void vx900_cpu_bus_preram_setup(void)
 {
 	/* Faster CPU to DRAM Cycle */
 	pci_mod_config8(HOST_BUS, 0x50, 0x0f, 0x08);
-	/* CPU Interface Control – Basic Options */
+	/* CPU Interface Control - Basic Options */
 	pci_mod_config8(HOST_BUS, 0x51, 0, 0x6c);
-	/*CPU Interface Control – Advanced Options */
+	/*CPU Interface Control - Advanced Options */
 	pci_write_config8(HOST_BUS, 0x52, 0xc7);
 	/* Enable 8QW burst and 4QW request merging [4] and [2]
 	 * and special mode for read cycles bit[3] */
diff --git a/src/northbridge/via/vx900/raminit_ddr3.c b/src/northbridge/via/vx900/raminit_ddr3.c
index e0c557936d..f4b61de88b 100644
--- a/src/northbridge/via/vx900/raminit_ddr3.c
+++ b/src/northbridge/via/vx900/raminit_ddr3.c
@@ -186,14 +186,14 @@ static pci_reg8 mcu_drv_ctrl_config[] = {
 	{0xd4, 0x80},		/* Set internal ODT to dynamically turn on or off */
 	{0xd6, 0x20},		/* Enable strong driving for MA and DRAM commands */
 	{0xd0, 0x88},		/* (ODT) Strength ?has effect? */
-	{0xe0, 0x88},		/* DRAM Driving – Group DQS (MDQS) */
+	{0xe0, 0x88},		/* DRAM Driving - Group DQS (MDQS) */
 	{0xe1, 0x00},		/* Disable offset mode for driving strength control */
-	{0xe2, 0x88},		/* DRAM Driving – Group DQ (MD, MDQM) */
-	{0xe4, 0xcc},		/* DRAM Driving – Group CSA (MCS, MCKE, MODT) */
-	{0xe8, 0x88},		/* DRAM Driving – Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */
-	{0xe6, 0xff},		/* DRAM Driving – Group DCLK0 (DCLK[2:0] for DIMM0) */
-	{0xe7, 0xff},		/* DRAM Driving – Group DCLK1 (DCLK[5:3] for DIMM1) */
-	{0xe4, 0xcc},		/* DRAM Driving – Group CSA (MCS, MCKE, MODT) */
+	{0xe2, 0x88},		/* DRAM Driving - Group DQ (MD, MDQM) */
+	{0xe4, 0xcc},		/* DRAM Driving - Group CSA (MCS, MCKE, MODT) */
+	{0xe8, 0x88},		/* DRAM Driving - Group MA (MA, MBA, MSRAS, MSCAS, MSWE) */
+	{0xe6, 0xff},		/* DRAM Driving - Group DCLK0 (DCLK[2:0] for DIMM0) */
+	{0xe7, 0xff},		/* DRAM Driving - Group DCLK1 (DCLK[5:3] for DIMM1) */
+	{0xe4, 0xcc},		/* DRAM Driving - Group CSA (MCS, MCKE, MODT) */
 	{0x91, 0x08},		/* MCLKO Output Phase Delay - I */
 	{0x92, 0x08},		/* MCLKO Output Phase Delay - II */
 	{0x93, 0x16},		/* CS/CKE Output Phase Delay */
@@ -807,8 +807,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
 	/* Step 08 - Set Fun3_RX6B[2:0] to 011b (MSR Enable). */
 	pci_mod_config8(MCU, 0x6b, 0x07, 0x03);	/* MSR Enable */
 
-	/* Step 09 – Issue MR2 cycle. Read a double word from the address
-	 * depended on DRAM’s Rtt_WR and CWL settings. */
+	/* Step 09 - Issue MR2 cycle. Read a double word from the address
+	 * depended on DRAM's Rtt_WR and CWL settings. */
 	mrs = ddr3_get_mr2(rtt_wr, srt, asr, cwl);
 	if (ma_swap)
 		mrs = ddr3_mrs_mirror_pins(mrs);
@@ -816,7 +816,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
 	printram("MR2: %.5x\n", mrs);
 	udelay(1000);
 
-	/* Step 10 – Issue MR3 cycle. Read a double word from the address 60000h
+	/* Step 10 - Issue MR3 cycle. Read a double word from the address 60000h
 	 * to set DRAM to normal operation mode. */
 	mrs = ddr3_get_mr3(0);
 	if (ma_swap)
@@ -825,8 +825,8 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
 	printram("MR3: %.5x\n", mrs);
 	udelay(1000);
 
-	/* Step 11 –Issue MR1 cycle. Read a double word from the address
-	 * depended on DRAM’s output driver impedance and Rtt_Nom settings.
+	/* Step 11 -Issue MR1 cycle. Read a double word from the address
+	 * depended on DRAM's output driver impedance and Rtt_Nom settings.
 	 * The DLL enable field, TDQS field, write leveling enable field,
 	 * additive latency field and Qoff field should be set to 0. */
 	mrs = ddr3_get_mr1(DDR3_MR1_QOFF_ENABLE, DDR3_MR1_TQDS_DISABLE, rtt_nom,
@@ -839,7 +839,7 @@ static void vx900_dram_ddr3_do_sw_mrs(u8 ma_swap, enum ddr3_mr1_rtt_nom rtt_nom,
 	udelay(1000);
 
 	/* Step 12 - Issue MR0 cycle. Read a double word from the address
-	 * depended on DRAM’s burst length, CAS latency and write recovery time
+	 * depended on DRAM's burst length, CAS latency and write recovery time
 	 * settings.
 	 * The read burst type field should be set to interleave.
 	 * The mode field should be set to normal mode.
@@ -942,13 +942,13 @@ static void vx900_dram_ddr3_dimm_init(const ramctr_timing * ctrl,
 		vx900_map_pr_vr(i, 3);
 	}
 
-	/* Step 16 – Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */
+	/* Step 16 - Set Fun3_Rx6B[2:0] to 000b (Normal SDRAM Mode). */
 	pci_mod_config8(MCU, 0x6b, 0x07, 0x00);
 
 	/* Set BA[0/1/2] to [A13/14/15] */
 	vx900_dram_set_ma_pin_map(VX900_CALIB_MA_MAP);
 
-	/* Step 17 – Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */
+	/* Step 17 - Set Fun3_Rx69[0] to 1b (Enable Multiple Page Mode). */
 	pci_mod_config8(MCU, 0x69, 0x00, (1 << 0));
 
 	printram("DIMM initialization sequence complete\n");
diff --git a/src/northbridge/via/vx900/sata.c b/src/northbridge/via/vx900/sata.c
index 98e4bd2f00..e0a54bdaee 100644
--- a/src/northbridge/via/vx900/sata.c
+++ b/src/northbridge/via/vx900/sata.c
@@ -199,7 +199,7 @@ static void vx900_sata_init(device_t dev)
 	/* Resend COMRESET When Recovering SATA Gen2 Device Error */
 	pci_mod_config8(dev, 0x62, 1 << 1, 1 << 7);
 
-	/* Fix "PMP Device Can’t Detect HDD Normally" (VIA Porting Guide)
+	/* Fix "PMP Device Can't Detect HDD Normally" (VIA Porting Guide)
 	 * SATA device detection will not work unless we clear these bits.
 	 * Without doing this, SeaBIOS (and potentially other payloads) will
 	 * timeout when detecting SATA devices */
@@ -211,8 +211,8 @@ static void vx900_sata_init(device_t dev)
 	 * reset and check the BSY bit of one port only, and the BSY bit of
 	 * other port would be 1, then it does another software reset
 	 * immediately and causes the system hang.
-	 * This is because the first software reset doesn’t finish, and the
-	 * state machine of the host controller conflicts, it can’t finish the
+	 * This is because the first software reset doesn't finish, and the
+	 * state machine of the host controller conflicts, it can't finish the
 	 * second one anymore. The BSY bit of slave port would be always 1 after
 	 * the second software reset issues. BIOS should set the following
 	 * bit to avoid this issue. */
diff --git a/src/soc/broadcom/cygnus/ddr_init.c b/src/soc/broadcom/cygnus/ddr_init.c
index b08e3c0a3c..abf034bc86 100644
--- a/src/soc/broadcom/cygnus/ddr_init.c
+++ b/src/soc/broadcom/cygnus/ddr_init.c
@@ -97,8 +97,8 @@ void PRE_SRX(void)
 	readvalue = reg32_read ((volatile uint32_t *)DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL);
 	reg32_write ((volatile uint32_t *)DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL, ( readvalue & ~(1 << DDR_PHY_BYTE_LANE_1_IDLE_PAD_CONTROL__IDDQ)));
 
-	// Turn on PHY_CONTROL AUTO_OEB ¨C not required
-	// Enable byte lane AUTO_DQ_RXENB_MODE: bits 18 and 19 of the byte lane IDLE_PAD_CONTROL ¨C already set 180114c8: 000f000a
+	// Turn on PHY_CONTROL AUTO_OEB C not required
+	// Enable byte lane AUTO_DQ_RXENB_MODE: bits 18 and 19 of the byte lane IDLE_PAD_CONTROL C already set 180114c8: 000f000a
 
 	printk(BIOS_INFO, "\n....PLL power up.\n");
 	reg32_write((volatile uint32_t *)DDR_PHY_CONTROL_REGS_PLL_CONFIG, (reg32_read((volatile uint32_t *)DDR_PHY_CONTROL_REGS_PLL_CONFIG) & ~(1<<DDR_PHY_CONTROL_REGS_PLL_CONFIG__PWRDN)));
diff --git a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
index 232e5bdf94..4f3a744ff5 100644
--- a/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
+++ b/src/soc/intel/fsp_baytrail/acpi/irqroute.asl
@@ -19,9 +19,9 @@ Method(_PRT)
 {
 	/*
 	 * PICM comes from _PIC, which returns the following:
-	 * 0 – PIC mode
-	 * 1 – APIC mode
-	 * 2 – SAPIC mode
+	 * 0 - PIC mode
+	 * 1 - APIC mode
+	 * 2 - SAPIC mode
 	 */
 	If (PICM) {
 		Return (Package() {
diff --git a/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl b/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl
index a4ce5eaddf..8a54d33797 100644
--- a/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl
+++ b/src/soc/intel/fsp_broadwell_de/acpi/irqroute.asl
@@ -19,9 +19,9 @@ Method(_PRT)
 {
 	/*
 	 * PICM comes from _PIC, which returns the following:
-	 * 0 – PIC mode
-	 * 1 – APIC mode
-	 * 2 – SAPIC mode
+	 * 0 - PIC mode
+	 * 1 - APIC mode
+	 * 2 - SAPIC mode
 	 */
 	If (PICM) {
 		Return (Package() {
diff --git a/src/southbridge/amd/agesa/hudson/fadt.c b/src/southbridge/amd/agesa/hudson/fadt.c
index 4ac483364f..276ded2d19 100644
--- a/src/southbridge/amd/agesa/hudson/fadt.c
+++ b/src/southbridge/amd/agesa/hudson/fadt.c
@@ -67,7 +67,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 
 	fadt->model = 0;		/* reserved, should be 0 ACPI 3.0 */
 	fadt->preferred_pm_profile = FADT_PM_PROFILE;
-	fadt->sci_int = 9;		/* HUDSON - IRQ 09 – ACPI SCI */
+	fadt->sci_int = 9;		/* HUDSON - IRQ 09 - ACPI SCI */
 
 	if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
 		fadt->smi_cmd = ACPI_SMI_CTL_PORT;
diff --git a/src/southbridge/amd/cimx/sb800/fadt.c b/src/southbridge/amd/cimx/sb800/fadt.c
index e6572f3078..ad47ad7397 100644
--- a/src/southbridge/amd/cimx/sb800/fadt.c
+++ b/src/southbridge/amd/cimx/sb800/fadt.c
@@ -71,7 +71,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 
 	fadt->model = 0;		/* reserved, should be 0 ACPI 3.0 */
 	fadt->preferred_pm_profile = FADT_PM_PROFILE;
-	fadt->sci_int = 9;		/* HUDSON 1 - IRQ 09 – ACPI SCI */
+	fadt->sci_int = 9;		/* HUDSON 1 - IRQ 09 - ACPI SCI */
 	fadt->smi_cmd = 0;		/* disable system management mode */
 	fadt->acpi_enable = 0;	/* unused if SMI_CMD = 0 */
 	fadt->acpi_disable = 0;	/* unused if SMI_CMD = 0 */
diff --git a/src/southbridge/amd/pi/hudson/fadt.c b/src/southbridge/amd/pi/hudson/fadt.c
index 8a5fbd9585..ce8ce6d913 100644
--- a/src/southbridge/amd/pi/hudson/fadt.c
+++ b/src/southbridge/amd/pi/hudson/fadt.c
@@ -59,7 +59,7 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
 	fadt->dsdt = (u32) dsdt;
 	fadt->model = 0;		/* reserved, should be 0 ACPI 3.0 */
 	fadt->preferred_pm_profile = FADT_PM_PROFILE;
-	fadt->sci_int = 9;		/* HUDSON - IRQ 09 – ACPI SCI */
+	fadt->sci_int = 9;		/* HUDSON - IRQ 09 - ACPI SCI */
 
 	if (IS_ENABLED(CONFIG_HAVE_SMI_HANDLER)) {
 		fadt->smi_cmd = ACPI_SMI_CTL_PORT;
diff --git a/src/southbridge/intel/bd82x6x/smihandler.c b/src/southbridge/intel/bd82x6x/smihandler.c
index 0be526c0d0..e4e5b81493 100644
--- a/src/southbridge/intel/bd82x6x/smihandler.c
+++ b/src/southbridge/intel/bd82x6x/smihandler.c
@@ -782,7 +782,7 @@ static void southbridge_smi_monitor(void)
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/fsp_bd82x6x/smihandler.c b/src/southbridge/intel/fsp_bd82x6x/smihandler.c
index 8a66369973..987d6d1e1f 100644
--- a/src/southbridge/intel/fsp_bd82x6x/smihandler.c
+++ b/src/southbridge/intel/fsp_bd82x6x/smihandler.c
@@ -666,7 +666,7 @@ static void southbridge_smi_monitor(void)
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/fsp_i89xx/smihandler.c b/src/southbridge/intel/fsp_i89xx/smihandler.c
index 4943525590..e0d19d685f 100644
--- a/src/southbridge/intel/fsp_i89xx/smihandler.c
+++ b/src/southbridge/intel/fsp_i89xx/smihandler.c
@@ -666,7 +666,7 @@ static void southbridge_smi_monitor(void)
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl
index 0ec754515d..b523a7632f 100644
--- a/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl
+++ b/src/southbridge/intel/fsp_rangeley/acpi/irqroute.asl
@@ -19,9 +19,9 @@ Method(_PRT)
 {
 	/*
 	 * PICM comes from _PIC, which returns the following:
-	 * 0 – PIC mode
-	 * 1 – APIC mode
-	 * 2 – SAPIC mode
+	 * 0 - PIC mode
+	 * 1 - APIC mode
+	 * 2 - SAPIC mode
 	 */
 	If (PICM) {
 		Return (Package() {
diff --git a/src/southbridge/intel/i82801dx/smihandler.c b/src/southbridge/intel/i82801dx/smihandler.c
index 7004764f36..326a9e5a43 100644
--- a/src/southbridge/intel/i82801dx/smihandler.c
+++ b/src/southbridge/intel/i82801dx/smihandler.c
@@ -549,7 +549,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/i82801gx/smihandler.c b/src/southbridge/intel/i82801gx/smihandler.c
index bcc764194a..b12828056c 100644
--- a/src/southbridge/intel/i82801gx/smihandler.c
+++ b/src/southbridge/intel/i82801gx/smihandler.c
@@ -586,7 +586,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
 	/* IOTRAP(0) SMIC: currently unused  */
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/i82801ix/smihandler.c b/src/southbridge/intel/i82801ix/smihandler.c
index 9e04328989..4f308650a6 100644
--- a/src/southbridge/intel/i82801ix/smihandler.c
+++ b/src/southbridge/intel/i82801ix/smihandler.c
@@ -409,7 +409,7 @@ static void southbridge_smi_monitor(unsigned int node, smm_state_save_area_t *st
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/src/southbridge/intel/ibexpeak/smihandler.c b/src/southbridge/intel/ibexpeak/smihandler.c
index 6a482779f4..d4fbed4e5c 100644
--- a/src/southbridge/intel/ibexpeak/smihandler.c
+++ b/src/southbridge/intel/ibexpeak/smihandler.c
@@ -768,7 +768,7 @@ static void southbridge_smi_monitor(void)
 	}
 
 	printk(BIOS_DEBUG, "  trapped io address = 0x%x\n", trap_cycle & 0xfffc);
-	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
+	for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, "  TRAP = %d\n", i);
 	printk(BIOS_DEBUG, "  AHBE = %x\n", (trap_cycle >> 16) & 0xf);
 	printk(BIOS_DEBUG, "  MASK = 0x%08x\n", mask);
 	printk(BIOS_DEBUG, "  read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
diff --git a/util/inteltool/cpu.c b/util/inteltool/cpu.c
index 0ed2ccb763..9bdc1eb7a0 100644
--- a/util/inteltool/cpu.c
+++ b/util/inteltool/cpu.c
@@ -1003,7 +1003,7 @@ int print_intel_core_msrs(void)
 
 /*
  * The following two tables are the Silvermont registers listed in Table 35-6
- * Intel® 64 and IA-32 Architectures Software Developer’s Manual
+ * Intel® 64 and IA-32 Architectures Software Developer's Manual
  * September 2014
  * Vol. 3C 35-59
  */
diff --git a/util/kconfig/regex.c b/util/kconfig/regex.c
index e63c8148b3..428653ca9d 100644
--- a/util/kconfig/regex.c
+++ b/util/kconfig/regex.c
@@ -120,7 +120,7 @@ init_syntax_once ()
 #define SYNTAX(c) re_syntax_table[c]
 
 #endif /* not emacs */
-
+
 /* Get the interface, including the syntax bits.  */
 #include "regex.h"
 
@@ -168,7 +168,7 @@ init_syntax_once ()
 /* As in Harbison and Steele.  */
 #define SIGN_EXTEND_CHAR(c) ((((unsigned char) (c)) ^ 128) - 128)
 #endif
-
+
 /* Should we use malloc or alloca?  If REGEX_MALLOC is not defined, we
    use `alloca' instead of `malloc'.  This is because using malloc in
    re_search* or re_match* could cause memory leaks when C-g is used in
@@ -236,7 +236,7 @@ char *alloca ();
 typedef char boolean;
 #define false 0
 #define true 1
-
+
 /* These are the command codes that appear in compiled regular
    expressions.  Some opcodes are followed by argument bytes.  A
    command code can specify any interpretation whatsoever for its
@@ -376,7 +376,7 @@ typedef enum
   notsyntaxspec
 #endif /* emacs */
 } re_opcode_t;
-
+
 /* Common operations on the compiled pattern.  */
 
 /* Store NUMBER in two contiguous bytes starting at DESTINATION.  */
@@ -450,7 +450,7 @@ extract_number_and_incr (destination, source)
 #endif /* not EXTRACT_MACROS */
 
 #endif /* DEBUG */
-
+
 /* If DEBUG is defined, Regex prints many voluminous messages about what
    it is doing (if the variable `debug' is nonzero).  If linked with the
    main program in `iregex.c', you can enter patterns and strings
@@ -790,7 +790,7 @@ print_double_string (where, string1, size1, string2, size2)
 #define DEBUG_PRINT_DOUBLE_STRING(w, s1, sz1, s2, sz2)
 
 #endif /* not DEBUG */
-
+
 /* Set by `re_set_syntax' to the current regexp syntax to recognize.  Can
    also be assigned to arbitrarily: each pattern buffer stores its own
    syntax, so it can be changed between regex compilations.  */
@@ -813,7 +813,7 @@ re_set_syntax (syntax)
   re_syntax_options = syntax;
   return ret;
 }
-
+
 /* This table gives an error message for each of the error codes listed
    in regex.h.  Obviously the order here has to be same as there.  */
 
@@ -836,7 +836,7 @@ static const char *re_error_msg[] =
     "Regular expression too big",		/* REG_ESIZE */
     "Unmatched ) or \\)",			/* REG_ERPAREN */
   };
-
+
 /* Subroutine declarations and macros for regex_compile.  */
 
 static void store_op1 (), store_op2 ();
@@ -1039,7 +1039,7 @@ typedef struct
     || STREQ (string, "space") || STREQ (string, "print")		\
     || STREQ (string, "punct") || STREQ (string, "graph")		\
     || STREQ (string, "cntrl") || STREQ (string, "blank"))
-
+
 /* `regex_compile' compiles PATTERN (of length SIZE) according to SYNTAX.
    Returns one of error codes defined in `regex.h', or zero for success.
 
@@ -2054,7 +2054,7 @@ regex_compile (pattern, size, syntax, bufp)
 
   return REG_NOERROR;
 } /* regex_compile */
-
+
 /* Subroutines for `regex_compile'.  */
 
 /* Store OP at LOC followed by two-byte integer parameter ARG.  */
@@ -2240,7 +2240,7 @@ compile_range (p_ptr, pend, translate, syntax, b)
 
   return REG_NOERROR;
 }
-
+
 /* Failure stack declarations and macros; both re_compile_fastmap and
    re_match_2 use a failure stack.  These have to be macros because of
    REGEX_ALLOCATE.  */
@@ -2514,7 +2514,7 @@ typedef struct
 									\
   DEBUG_STATEMENT (nfailure_points_popped++);				\
 } /* POP_FAILURE_POINT */
-
+
 /* re_compile_fastmap computes a ``fastmap'' for the compiled pattern in
    BUFP.  A fastmap records which of the (1 << BYTEWIDTH) possible
    characters can start a string that matches the pattern.  This fastmap
@@ -2799,7 +2799,7 @@ re_compile_fastmap (bufp)
   bufp->can_be_null |= path_can_be_null;
   return 0;
 } /* re_compile_fastmap */
-
+
 /* Set REGS to hold NUM_REGS registers, storing them in STARTS and
    ENDS.  Subsequent matches using PATTERN_BUFFER and REGS will use
    this memory for recording register information.  STARTS and ENDS
@@ -2834,7 +2834,7 @@ re_set_registers (bufp, regs, num_regs, starts, ends)
       regs->start = regs->end = (regoff_t) 0;
     }
 }
-
+
 /* Searching routines.  */
 
 /* Like re_search_2, below, but only one string is specified, and
@@ -2988,7 +2988,7 @@ re_search_2 (bufp, string1, size1, string2, size2, startpos, range, regs, stop)
     }
   return -1;
 } /* re_search_2 */
-
+
 /* Declarations and macros for re_match_2.  */
 
 static int bcmp_translate ();
@@ -3126,7 +3126,7 @@ typedef union
    to actually save any registers when none are active.  */
 #define NO_HIGHEST_ACTIVE_REG (1 << BYTEWIDTH)
 #define NO_LOWEST_ACTIVE_REG (NO_HIGHEST_ACTIVE_REG + 1)
-
+
 /* Matching routines.  */
 
 #ifndef emacs   /* Emacs never uses this.  */
@@ -4339,7 +4339,7 @@ re_match_2 (bufp, string1, size1, string2, size2, pos, regs, stop)
 
   return -1;         			/* Failure to match.  */
 } /* re_match_2 */
-
+
 /* Subroutine definitions for re_match_2.  */
 
 
@@ -4601,7 +4601,7 @@ bcmp_translate (s1, s2, len, translate)
     }
   return 0;
 }
-
+
 /* Entry points for GNU code.  */
 
 /* re_compile_pattern is the GNU regular expression compiler: it
@@ -4637,7 +4637,7 @@ re_compile_pattern (pattern, length, bufp)
 
   return re_error_msg[(int) ret];
 }
-
+
 /* Entry points compatible with 4.2 BSD regex library.  We don't define
    them if this is an Emacs or POSIX compilation.  */
 
@@ -4693,7 +4693,7 @@ re_exec (s)
     0 <= re_search (&re_comp_buf, s, len, 0, len, (struct re_registers *) 0);
 }
 #endif /* not emacs and not _POSIX_SOURCE */
-
+
 /* POSIX.2 functions.  Don't define these for Emacs.  */
 
 #ifndef emacs
@@ -4938,7 +4938,7 @@ regfree (preg)
 }
 
 #endif /* not emacs  */
-
+
 /*
 Local variables:
 make-backup-files: t
diff --git a/util/kconfig/regex.h b/util/kconfig/regex.h
index 91243971af..89e02d4dfc 100644
--- a/util/kconfig/regex.h
+++ b/util/kconfig/regex.h
@@ -135,7 +135,7 @@ typedef unsigned reg_syntax_t;
    stored in the pattern buffer, so changing this does not affect
    already-compiled regexps.  */
 extern reg_syntax_t re_syntax_options;
-
+
 /* Define combinations of the above bits for the standard possibilities.
    (The [[[ comments delimit what gets put into the Texinfo file, so
    don't delete them!)  */
@@ -198,7 +198,7 @@ extern reg_syntax_t re_syntax_options;
    | RE_NO_BK_PARENS        | RE_NO_BK_REFS				\
    | RE_NO_BK_VBAR	    | RE_UNMATCHED_RIGHT_PAREN_ORD)
 /* [[[end syntaxes]]] */
-
+
 /* Maximum number of duplicates an interval can allow.  Some systems
    (erroneously) define this in other header files, but we want our
    value, so remove any previous define.  */
@@ -268,7 +268,7 @@ typedef enum
   REG_ESIZE,		/* Compiled pattern bigger than 2^16 bytes.  */
   REG_ERPAREN		/* Unmatched ) or \); not returned from regcomp.  */
 } reg_errcode_t;
-
+
 /* This data structure represents a compiled pattern.  Before calling
    the pattern compiler, the fields `buffer', `allocated', `fastmap',
    `translate', and `no_sub' can be set.  After the pattern has been
@@ -349,7 +349,7 @@ typedef struct re_pattern_buffer regex_t;
 /* search.c (search_buffer) in Emacs needs this one opcode value.  It is
    defined both in `regex.c' and here.  */
 #define RE_EXACTN_VALUE 1
-
+
 /* Type for byte offsets within the string.  POSIX mandates this.  */
 typedef int regoff_t;
 
@@ -380,7 +380,7 @@ typedef struct
   regoff_t rm_so;  /* Byte offset from string's start to substring's start.  */
   regoff_t rm_eo;  /* Byte offset from string's start to substring's end.  */
 } regmatch_t;
-
+
 /* Declarations for routines.  */
 
 /* To avoid duplicating every routine declaration -- once with a
@@ -480,7 +480,7 @@ extern size_t regerror
 extern void regfree _RE_ARGS ((regex_t *preg));
 
 #endif /* not __REGEXP_LIBRARY_H__ */
-
+
 /*
 Local variables:
 make-backup-files: t