diff options
| author | Stefan Reinauer <stepan@coresystems.de> | 2009-10-23 19:33:52 +0000 |
|---|---|---|
| committer | Stefan Reinauer <stepan@openbios.org> | 2009-10-23 19:33:52 +0000 |
| commit | 5e1a8d10ba8a64e5bcf230323a314bf273794f62 (patch) | |
| tree | 20d5af6aeeed6ae7f8bd01ad85933f57e8788fe5 | |
| parent | 707fad0508ffabc6a5137e35d0248ccaa188dea9 (diff) | |
| download | coreboot-5e1a8d10ba8a64e5bcf230323a314bf273794f62.tar.xz | |
drop a lot of dead code, including an old winbond southbridge from our removed
ppc port, some ambiguous use of CONFIG_IDE and an unused ide driver (we dropped
the filesystems already to be used with it) (somewhat trivial)
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4828 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
32 files changed, 3 insertions, 2177 deletions
diff --git a/src/config/Options.lb b/src/config/Options.lb index 167e40104d..f69f94c327 100644 --- a/src/config/Options.lb +++ b/src/config/Options.lb @@ -718,31 +718,6 @@ define CONFIG_IOAPIC end ############################################### -# IDE specific options -############################################### - -define CONFIG_IDE - default 0 - export always - comment "Define to include IDE support" -end -define CONFIG_IDE_BOOT_DRIVE - default 0 - export always - comment "Disk number of boot drive" -end -define CONFIG_IDE_SWAB - default none - export used - comment "Swap bytes when reading from IDE device" -end -define CONFIG_IDE_OFFSET - default 0 - export always - comment "Sector at which to start searching for boot image" -end - -############################################### # Options for memory mapped I/O ############################################### diff --git a/src/cpu/ppc/ppc4xx/pci_bridge.c b/src/cpu/ppc/ppc4xx/pci_bridge.c index 26f608d144..5c945c28eb 100755 --- a/src/cpu/ppc/ppc4xx/pci_bridge.c +++ b/src/cpu/ppc/ppc4xx/pci_bridge.c @@ -27,7 +27,6 @@ struct device_operations pci_bridge_ops = { }; struct pci_driver pci_bridge_pci_driver __pci_driver = { - /* w83c553f */ .ops = &pci_bridge_ops, .device = PCI_DEVICE_ID_IBM_405GP, .vendor = PCI_VENDOR_ID_IBM, diff --git a/src/include/pc80/ide.h b/src/include/pc80/ide.h deleted file mode 100644 index 3646f29513..0000000000 --- a/src/include/pc80/ide.h +++ /dev/null @@ -1,211 +0,0 @@ -/* - * UBL, The Universal Talkware Boot Loader - * Copyright (C) 2000 Universal Talkware Inc. - * Copyright (C) 2002 Eric Biederman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * - * - */ - -typedef uint64_t sector_t; - -struct controller { - uint16_t cmd_base; - uint16_t ctrl_base; -}; - -struct harddisk_info { - struct controller *ctrl; - uint16_t heads; - uint16_t cylinders; - uint16_t sectors_per_track; - uint8_t model_number[41]; - uint8_t slave; - sector_t sectors; - int address_mode; /* am i lba (0x40) or chs (0x00) */ -#define ADDRESS_MODE_CHS 0 -#define ADDRESS_MODE_LBA 1 -#define ADDRESS_MODE_LBA48 2 -#define ADDRESS_MODE_PACKET 3 - uint32_t hw_sector_size; - unsigned drive_exists : 1; - unsigned slave_absent : 1; - unsigned removable : 1; -}; - - -#define IDE_SECTOR_SIZE 0x200 -#define CDROM_SECTOR_SIZE 0x800 - -#define IDE_BASE0 (0x1F0u) /* primary controller */ -#define IDE_BASE1 (0x170u) /* secondary */ -#define IDE_BASE2 (0x0F0u) /* third */ -#define IDE_BASE3 (0x070u) /* fourth */ - -#define IDE_REG_EXTENDED_OFFSET (0x204u) - -#define IDE_REG_DATA(ctrl) ((ctrl)->cmd_base + 0u) /* word register */ -#define IDE_REG_ERROR(ctrl) ((ctrl)->cmd_base + 1u) -#define IDE_REG_PRECOMP(ctrl) ((ctrl)->cmd_base + 1u) -#define IDE_REG_FEATURE(ctrl) ((ctrl)->cmd_base + 1u) -#define IDE_REG_SECTOR_COUNT(ctrl) ((ctrl)->cmd_base + 2u) -#define IDE_REG_SECTOR_NUMBER(ctrl) ((ctrl)->cmd_base + 3u) -#define IDE_REG_LBA_LOW(ctrl) ((ctrl)->cmd_base + 3u) -#define IDE_REG_CYLINDER_LSB(ctrl) ((ctrl)->cmd_base + 4u) -#define IDE_REG_LBA_MID(ctrl) ((ctrl)->cmd_base + 4u) -#define IDE_REG_CYLINDER_MSB(ctrl) ((ctrl)->cmd_base + 5u) -#define IDE_REG_LBA_HIGH(ctrl) ((ctrl)->cmd_base + 5u) -#define IDE_REG_DRIVEHEAD(ctrl) ((ctrl)->cmd_base + 6u) -#define IDE_REG_DEVICE(ctrl) ((ctrl)->cmd_base + 6u) -#define IDE_REG_STATUS(ctrl) ((ctrl)->cmd_base + 7u) -#define IDE_REG_COMMAND(ctrl) ((ctrl)->cmd_base + 7u) -#define IDE_REG_ALTSTATUS(ctrl) ((ctrl)->ctrl_base + 2u) -#define IDE_REG_DEVICE_CONTROL(ctrl) ((ctrl)->ctrl_base + 2u) - -struct ide_pio_command -{ - uint8_t feature; - uint8_t sector_count; - uint8_t lba_low; - uint8_t lba_mid; - uint8_t lba_high; - uint8_t device; -# define IDE_DH_DEFAULT (0xA0) -# define IDE_DH_HEAD(x) ((x) & 0x0F) -# define IDE_DH_MASTER (0x00) -# define IDE_DH_SLAVE (0x10) -# define IDE_DH_LBA (0x40) -# define IDE_DH_CHS (0x00) - uint8_t command; - uint8_t sector_count2; - uint8_t lba_low2; - uint8_t lba_mid2; - uint8_t lba_high2; -}; - -#define IDE_DEFAULT_COMMAND { 0xFFu, 0x01, 0x00, 0x0000, IDE_DH_DEFAULT } - -#define IDE_ERR_ICRC 0x80 /* ATA Ultra DMA bad CRC */ -#define IDE_ERR_BBK 0x80 /* ATA bad block */ -#define IDE_ERR_UNC 0x40 /* ATA uncorrected error */ -#define IDE_ERR_MC 0x20 /* ATA media change */ -#define IDE_ERR_IDNF 0x10 /* ATA id not found */ -#define IDE_ERR_MCR 0x08 /* ATA media change request */ -#define IDE_ERR_ABRT 0x04 /* ATA command aborted */ -#define IDE_ERR_NTK0 0x02 /* ATA track 0 not found */ -#define IDE_ERR_NDAM 0x01 /* ATA address mark not found */ - -#define IDE_STATUS_BSY 0x80 /* busy */ -#define IDE_STATUS_RDY 0x40 /* ready */ -#define IDE_STATUS_DF 0x20 /* device fault */ -#define IDE_STATUS_WFT 0x20 /* write fault (old name) */ -#define IDE_STATUS_SKC 0x10 /* seek complete */ -#define IDE_STATUS_DRQ 0x08 /* data request */ -#define IDE_STATUS_CORR 0x04 /* corrected */ -#define IDE_STATUS_IDX 0x02 /* index */ -#define IDE_STATUS_ERR 0x01 /* error (ATA) */ -#define IDE_STATUS_CHK 0x01 /* check (ATAPI) */ - -#define IDE_CTRL_HD15 0x08 /* bit should always be set to one */ -#define IDE_CTRL_SRST 0x04 /* soft reset */ -#define IDE_CTRL_NIEN 0x02 /* disable interrupts */ - - -/* Most mandtory and optional ATA commands (from ATA-3), */ - -#define IDE_CMD_CFA_ERASE_SECTORS 0xC0 -#define IDE_CMD_CFA_REQUEST_EXT_ERR_CODE 0x03 -#define IDE_CMD_CFA_TRANSLATE_SECTOR 0x87 -#define IDE_CMD_CFA_WRITE_MULTIPLE_WO_ERASE 0xCD -#define IDE_CMD_CFA_WRITE_SECTORS_WO_ERASE 0x38 -#define IDE_CMD_CHECK_POWER_MODE1 0xE5 -#define IDE_CMD_CHECK_POWER_MODE2 0x98 -#define IDE_CMD_DEVICE_RESET 0x08 -#define IDE_CMD_EXECUTE_DEVICE_DIAGNOSTIC 0x90 -#define IDE_CMD_FLUSH_CACHE 0xE7 -#define IDE_CMD_FORMAT_TRACK 0x50 -#define IDE_CMD_IDENTIFY_DEVICE 0xEC -#define IDE_CMD_IDENTIFY_DEVICE_PACKET 0xA1 -#define IDE_CMD_IDENTIFY_PACKET_DEVICE 0xA1 -#define IDE_CMD_IDLE1 0xE3 -#define IDE_CMD_IDLE2 0x97 -#define IDE_CMD_IDLE_IMMEDIATE1 0xE1 -#define IDE_CMD_IDLE_IMMEDIATE2 0x95 -#define IDE_CMD_INITIALIZE_DRIVE_PARAMETERS 0x91 -#define IDE_CMD_INITIALIZE_DEVICE_PARAMETERS 0x91 -#define IDE_CMD_NOP 0x00 -#define IDE_CMD_PACKET 0xA0 -#define IDE_CMD_READ_BUFFER 0xE4 -#define IDE_CMD_READ_DMA 0xC8 -#define IDE_CMD_READ_DMA_QUEUED 0xC7 -#define IDE_CMD_READ_MULTIPLE 0xC4 -#define IDE_CMD_READ_SECTORS 0x20 -#define IDE_CMD_READ_SECTORS_EXT 0x24 -#define IDE_CMD_READ_VERIFY_SECTORS 0x40 -#define IDE_CMD_RECALIBRATE 0x10 -#define IDE_CMD_SEEK 0x70 -#define IDE_CMD_SET_FEATURES 0xEF -#define IDE_CMD_SET_MAX_ADDR_EXT 0x24 -#define IDE_CMD_SET_MULTIPLE_MODE 0xC6 -#define IDE_CMD_SLEEP1 0xE6 -#define IDE_CMD_SLEEP2 0x99 -#define IDE_CMD_STANDBY1 0xE2 -#define IDE_CMD_STANDBY2 0x96 -#define IDE_CMD_STANDBY_IMMEDIATE1 0xE0 -#define IDE_CMD_STANDBY_IMMEDIATE2 0x94 -#define IDE_CMD_WRITE_BUFFER 0xE8 -#define IDE_CMD_WRITE_DMA 0xCA -#define IDE_CMD_WRITE_DMA_QUEUED 0xCC -#define IDE_CMD_WRITE_MULTIPLE 0xC5 -#define IDE_CMD_WRITE_SECTORS 0x30 -#define IDE_CMD_WRITE_VERIFY 0x3C - -/* IDE_CMD_SET_FEATURE sub commands */ -#define IDE_FEATURE_CFA_ENABLE_8BIT_PIO 0x01 -#define IDE_FEATURE_ENABLE_WRITE_CACHE 0x02 -#define IDE_FEATURE_SET_TRANSFER_MODE 0x03 -#define IDE_FEATURE_ENABLE_POWER_MANAGEMENT 0x05 -#define IDE_FEATURE_ENABLE_POWERUP_IN_STANDBY 0x06 -#define IDE_FEATURE_STANDBY_SPINUP_DRIVE 0x07 -#define IDE_FEATURE_CFA_ENABLE_POWER_MODE1 0x0A -#define IDE_FEATURE_DISABLE_MEDIA_STATUS_NOTIFICATION 0x31 -#define IDE_FEATURE_ENABLE_AUTOMATIC_ACOUSTIC_MANAGEMENT 0x42 -#define IDE_FEATURE_SET_MAXIMUM_HOST_INTERFACE_SECTOR_TIMES 0x43 -#define IDE_FEATURE_DISABLE_READ_LOOKAHEAD 0x55 -#define IDE_FEATURE_ENABLE_RELEASE_INTERRUPT 0x5D -#define IDE_FEATURE_ENABLE_SERVICE_INTERRUPT 0x5E -#define IDE_FEATURE_DISABLE_REVERTING_TO_POWERON_DEFAULTS 0x66 -#define IDE_FEATURE_CFA_DISABLE_8BIT_PIO 0x81 -#define IDE_FEATURE_DISABLE_WRITE_CACHE 0x82 -#define IDE_FEATURE_DISABLE_POWER_MANAGEMENT 0x85 -#define IDE_FEATURE_DISABLE_POWERUP_IN_STANDBY 0x86 -#define IDE_FEATURE_CFA_DISABLE_POWER_MODE1 0x8A -#define IDE_FEATURE_ENABLE_MEDIA_STATUS_NOTIFICATION 0x95 -#define IDE_FEATURE_ENABLE_READ_LOOKAHEAD 0xAA -#define IDE_FEATURE_DISABLE_AUTOMATIC_ACOUSTIC_MANAGEMENT 0xC2 -#define IDE_FEATURE_ENABLE_REVERTING_TO_POWERON_DEFAULTS 0xCC -#define IDE_FEATURE_DISABLE_SERVICE_INTERRUPT 0xDE - -#define IDE_MAX_CONTROLLERS 2 -#define IDE_MAX_DRIVES (IDE_MAX_CONTROLLERS*2) -#define SECTOR_SIZE 512 -#define SECTOR_SHIFT 9 - -/* Maximum block_size that may be set. */ -#define DISK_BUFFER_SIZE (18 * SECTOR_SIZE) - -extern int ide_probe(int drive); -extern int ide_read(int drive, sector_t sector, void *buffer); diff --git a/src/mainboard/asus/mew-vm/Options.lb b/src/mainboard/asus/mew-vm/Options.lb index 779f0ed89b..50f0b54a7a 100644 --- a/src/mainboard/asus/mew-vm/Options.lb +++ b/src/mainboard/asus/mew-vm/Options.lb @@ -38,7 +38,6 @@ uses CONFIG_TTYS0_BAUD uses CONFIG_TTYS0_BASE uses CONFIG_TTYS0_LCS uses CONFIG_UDELAY_TSC -uses CONFIG_IDE ## CONFIG_ROM_SIZE is the size of boot ROM that this board will use. default CONFIG_ROM_SIZE = 512*1024 @@ -73,9 +72,6 @@ default CONFIG_IRQ_SLOT_COUNT = 11 ## default CONFIG_HAVE_OPTION_TABLE = 0 -## IDE Support -default CONFIG_IDE = 1 - ### ### coreboot layout values ### diff --git a/src/mainboard/intel/xe7501devkit/Options.lb b/src/mainboard/intel/xe7501devkit/Options.lb index 0de6572398..b302906586 100644 --- a/src/mainboard/intel/xe7501devkit/Options.lb +++ b/src/mainboard/intel/xe7501devkit/Options.lb @@ -44,7 +44,6 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses CONFIG_DEBUG #uses CONFIG_CPU_OPT -uses CONFIG_IDE ## These are defined in target Config.lb, don't add here uses CONFIG_USE_FALLBACK_IMAGE @@ -228,9 +227,6 @@ default CONFIG_MAXIMUM_CONSOLE_LOGLEVEL=8 ## Select power on after power fail setting default CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON" -## Things we may not have -default CONFIG_IDE=1 - default CONFIG_DEBUG=1 # default CONFIG_CPU_OPT="-g" diff --git a/src/pc80/Config.lb b/src/pc80/Config.lb index 3b9bc5b963..e05b76954c 100644 --- a/src/pc80/Config.lb +++ b/src/pc80/Config.lb @@ -1,4 +1,3 @@ -uses CONFIG_IDE uses CONFIG_UDELAY_IO uses CONFIG_USE_INIT uses CONFIG_ARCH_X86 @@ -12,10 +11,6 @@ if CONFIG_UDELAY_IO object udelay_io.o end -if CONFIG_IDE - dir ide -end - dir vga object keyboard.o diff --git a/src/pc80/ide/Config.lb b/src/pc80/ide/Config.lb deleted file mode 100644 index 4f70fbcd4e..0000000000 --- a/src/pc80/ide/Config.lb +++ /dev/null @@ -1 +0,0 @@ -object ide.o diff --git a/src/pc80/ide/ide.c b/src/pc80/ide/ide.c deleted file mode 100644 index 3ca60ad09d..0000000000 --- a/src/pc80/ide/ide.c +++ /dev/null @@ -1,959 +0,0 @@ -/* Derived from Etherboot 5.1 */ - -#include <stdlib.h> -#include <string.h> -#include <console/console.h> -#include <arch/io.h> -#include <pc80/ide.h> -#include <device/device.h> -#include <device/pci.h> -#include <delay.h> -#include <arch/byteorder.h> - -#define BSY_SET_DURING_SPINUP 1 - -static unsigned short ide_base[] = { - IDE_BASE0, - IDE_BASE1, - IDE_BASE2, - IDE_BASE3, - 0 -}; - -static struct controller controllers[IDE_MAX_CONTROLLERS]; -static struct harddisk_info harddisk_info[IDE_MAX_DRIVES]; - -static unsigned char ide_buffer[IDE_SECTOR_SIZE]; - -static int await_ide(int (*done)(struct controller *ctrl), - struct controller *ctrl, unsigned long timeout) -{ - int result; - timeout *= 100; /* timeout was ms; finer granularity => reacts faster */ - for(;;) { - result = done(ctrl); - if (result) { - return 0; - } - //poll_interruptions(); - if (timeout-- <= 0) { - break; - } - udelay(10); /* Added to avoid spinning GRW */ - } - printk_info("IDE time out\n"); - return -1; -} - -/* The maximum time any IDE command can last 31 seconds, - * So if any IDE commands takes this long we know we have problems. - */ -#define IDE_TIMEOUT (32*1000) - -static int not_bsy(struct controller *ctrl) -{ - return !(inb(IDE_REG_STATUS(ctrl)) & IDE_STATUS_BSY); -} - -/* IDE drives assert BSY bit within 400 nsec when SRST is set. - * Use 2 msec since our tick is 1 msec */ -#define IDE_RESET_PULSE 2 - -static int bsy(struct controller *ctrl) -{ - return inb(IDE_REG_STATUS(ctrl)) & IDE_STATUS_BSY; -} - -#if !BSY_SET_DURING_SPINUP -static int timeout(struct controller *ctrl) -{ - return 0; -} -#endif - -static void print_status(struct controller *ctrl) -{ - printk_debug("IDE: status=%#x, err=%#x\n", - inb(IDE_REG_STATUS(ctrl)), inb(IDE_REG_ERROR(ctrl))); -} - -static int ide_software_reset(struct controller *ctrl) -{ - /* Wait a little bit in case this is immediately after - * hardware reset. - */ - mdelay(2); - /* A software reset should not be delivered while the bsy bit - * is set. If the bsy bit does not clear in a reasonable - * amount of time give up. - */ - printk_debug("Waiting for ide%d to become ready for reset... ", - ctrl - controllers); - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - printk_debug("failed\n"); - return -1; - } - printk_debug("ok\n"); - - /* Disable Interrupts and reset the ide bus */ - outb(IDE_CTRL_HD15 | IDE_CTRL_SRST | IDE_CTRL_NIEN, - IDE_REG_DEVICE_CONTROL(ctrl)); - /* If BSY bit is not asserted within 400ns, no device there */ - if (await_ide(bsy, ctrl, IDE_RESET_PULSE) < 0) { - return -1; - } - outb(IDE_CTRL_HD15 | IDE_CTRL_NIEN, IDE_REG_DEVICE_CONTROL(ctrl)); - mdelay(2); - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - return 0; -} - -static void pio_set_registers( - struct controller *ctrl, const struct ide_pio_command *cmd) -{ - uint8_t device; - /* Disable Interrupts */ - outb(IDE_CTRL_HD15 | IDE_CTRL_NIEN, IDE_REG_DEVICE_CONTROL(ctrl)); - - /* Possibly switch selected device */ - device = inb(IDE_REG_DEVICE(ctrl)); - outb(cmd->device, IDE_REG_DEVICE(ctrl)); - if ((device & (1UL << 4)) != (cmd->device & (1UL << 4))) { - /* Allow time for the selected drive to switch, - * The linux ide code suggests 50ms is the right - * amount of time to use here. - */ - mdelay(50); - } - outb(cmd->feature, IDE_REG_FEATURE(ctrl)); - if (cmd->command == IDE_CMD_READ_SECTORS_EXT) { - outb(cmd->sector_count2, IDE_REG_SECTOR_COUNT(ctrl)); - outb(cmd->lba_low2, IDE_REG_LBA_LOW(ctrl)); - outb(cmd->lba_mid2, IDE_REG_LBA_MID(ctrl)); - outb(cmd->lba_high2, IDE_REG_LBA_HIGH(ctrl)); - } - outb(cmd->sector_count, IDE_REG_SECTOR_COUNT(ctrl)); - outb(cmd->lba_low, IDE_REG_LBA_LOW(ctrl)); - outb(cmd->lba_mid, IDE_REG_LBA_MID(ctrl)); - outb(cmd->lba_high, IDE_REG_LBA_HIGH(ctrl)); - outb(cmd->command, IDE_REG_COMMAND(ctrl)); -} - - -static int pio_non_data(struct controller *ctrl, const struct ide_pio_command *cmd) -{ - /* Wait until the busy bit is clear */ - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - - pio_set_registers(ctrl, cmd); - udelay(1); - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - /* FIXME is there more error checking I could do here? */ - return 0; -} - -static int pio_data_in(struct controller *ctrl, - const struct ide_pio_command *cmd, - void *buffer, size_t bytes) -{ - unsigned int status; - - /* FIXME handle commands with multiple blocks */ - /* Wait until the busy bit is clear */ - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - - /* How do I tell if INTRQ is asserted? */ - pio_set_registers(ctrl, cmd); - udelay(1); - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - status = inb(IDE_REG_STATUS(ctrl)); - if (!(status & IDE_STATUS_DRQ)) { - print_status(ctrl); - return -1; - } - insw(IDE_REG_DATA(ctrl), buffer, bytes/2); - status = inb(IDE_REG_STATUS(ctrl)); - if (status & IDE_STATUS_DRQ) { - print_status(ctrl); - return -1; - } - return 0; -} - -#ifdef __BIG_ENDIAN -static int pio_data_in_sw(struct controller *ctrl, - const struct ide_pio_command *cmd, - void *buffer, size_t bytes) -{ - unsigned int status; - - /* FIXME handle commands with multiple blocks */ - /* Wait until the busy bit is clear */ - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - - /* How do I tell if INTRQ is asserted? */ - pio_set_registers(ctrl, cmd); - udelay(1); - if (await_ide(not_bsy, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - status = inb(IDE_REG_STATUS(ctrl)); - if (!(status & IDE_STATUS_DRQ)) { - print_status(ctrl); - return -1; - } - insw_ns(IDE_REG_DATA(ctrl), buffer, bytes/2); - status = inb(IDE_REG_STATUS(ctrl)); - if (status & IDE_STATUS_DRQ) { - print_status(ctrl); - return -1; - } - return 0; -} -#endif /* __BIG_ENDIAN */ - -static int pio_packet(struct harddisk_info *info, int in, - const void *packet, int packet_len, - void *buffer, int buffer_len) -{ - unsigned int status; - struct ide_pio_command cmd; - - memset(&cmd, 0, sizeof(cmd)); - - /* Wait until the busy bit is clear */ - if (await_ide(not_bsy, info->ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - - /* Issue a PACKET command */ - cmd.lba_mid = (uint8_t) buffer_len; - cmd.lba_high = (uint8_t) (buffer_len >> 8); - cmd.device = IDE_DH_DEFAULT | info->slave; - cmd.command = IDE_CMD_PACKET; - pio_set_registers(info->ctrl, &cmd); - udelay(1); - if (await_ide(not_bsy, info->ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - status = inb(IDE_REG_STATUS(info->ctrl)); - if (!(status & IDE_STATUS_DRQ)) { - printk_debug("no drq after PACKET\n"); - print_status(info->ctrl); - return -1; - } - - /* Send the packet */ -#ifdef __BIG_ENDIAN - outsw_ns(IDE_REG_DATA(info->ctrl), packet, packet_len/2); -#else /* __BIG_ENDIAN */ - outsw(IDE_REG_DATA(info->ctrl), packet, packet_len/2); -#endif /* __BIG_ENDIAN */ - - if (await_ide(not_bsy, info->ctrl, IDE_TIMEOUT) < 0) { - return -1; - } - status = inb(IDE_REG_STATUS(info->ctrl)); - if (buffer_len == 0) { - if (status & IDE_STATUS_DRQ) { - printk_debug("drq after non-data command\n"); - print_status(info->ctrl); - return -1; - } - return 0; - } - - if (!(status & IDE_STATUS_DRQ)) { - printk_debug("no drq after sending packet\n"); - print_status(info->ctrl); - return -1; - } - -#ifdef __BIG_ENDIAN - insw_ns(IDE_REG_DATA(info->ctrl), buffer, buffer_len/2); -#else /* __BIG_ENDIAN */ - insw(IDE_REG_DATA(info->ctrl), buffer, buffer_len/2); -#endif /* __BIG_ENDIAN */ - - status = inb(IDE_REG_STATUS(info->ctrl)); - if (status & IDE_STATUS_DRQ) { - printk_debug("drq after insw\n"); - print_status(info->ctrl); - return -1; - } - return 0; -} - -static inline int ide_read_sector_chs( - struct harddisk_info *info, void *buffer, unsigned long sector) -{ - struct ide_pio_command cmd; - unsigned int track; - unsigned int offset; - unsigned int cylinder; - - memset(&cmd, 0, sizeof(cmd)); - cmd.sector_count = 1; - - //printk_debug("ide_read_sector_chs: sector= %ld.\n",sector); - - track = sector / info->sectors_per_track; - /* Sector number */ - offset = 1 + (sector % info->sectors_per_track); - cylinder = track / info->heads; - cmd.lba_low = offset; - cmd.lba_mid = cylinder & 0xff; - cmd.lba_high = (cylinder >> 8) & 0xff; - cmd.device = IDE_DH_DEFAULT | - IDE_DH_HEAD(track % info->heads) | - info->slave | - IDE_DH_CHS; - cmd.command = IDE_CMD_READ_SECTORS; -#ifdef __BIG_ENDIAN - return pio_data_in_sw(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#else /* __BIG_ENDIAN */ - return pio_data_in(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#endif /* __BIG_ENDIAN */ -} - -static inline int ide_read_sector_lba( - struct harddisk_info *info, void *buffer, unsigned long sector) -{ - struct ide_pio_command cmd; - memset(&cmd, 0, sizeof(cmd)); - - cmd.sector_count = 1; - cmd.lba_low = sector & 0xff; - cmd.lba_mid = (sector >> 8) & 0xff; - cmd.lba_high = (sector >> 16) & 0xff; - cmd.device = IDE_DH_DEFAULT | - ((sector >> 24) & 0x0f) | - info->slave | - IDE_DH_LBA; - cmd.command = IDE_CMD_READ_SECTORS; - //printk_debug("%s: sector= %ld, device command= 0x%x.\n",__func__,(unsigned long) sector, cmd.device); -#ifdef __BIG_ENDIAN - return pio_data_in_sw(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#else /* __BIG_ENDIAN */ - return pio_data_in(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#endif /* __BIG_ENDIAN */ -} - -static inline int ide_read_sector_lba48( - struct harddisk_info *info, void *buffer, sector_t sector) -{ - struct ide_pio_command cmd; - memset(&cmd, 0, sizeof(cmd)); - //printk_debug("ide_read_sector_lba48: sector= %ld.\n",(unsigned long) sector); - - cmd.sector_count = 1; - cmd.lba_low = sector & 0xff; - cmd.lba_mid = (sector >> 8) & 0xff; - cmd.lba_high = (sector >> 16) & 0xff; - cmd.lba_low2 = (sector >> 24) & 0xff; - cmd.lba_mid2 = (sector >> 32) & 0xff; - cmd.lba_high2 = (sector >> 40) & 0xff; - cmd.device = info->slave | IDE_DH_LBA; - cmd.command = IDE_CMD_READ_SECTORS_EXT; -#ifdef __BIG_ENDIAN - return pio_data_in_sw(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#else /* __BIG_ENDIAN */ - return pio_data_in(info->ctrl, &cmd, buffer, IDE_SECTOR_SIZE); -#endif /* __BIG_ENDIAN */ -} - -static inline int ide_read_sector_packet( - struct harddisk_info *info, void *buffer, sector_t sector) -{ - char packet[12]; - static uint8_t cdbuffer[CDROM_SECTOR_SIZE]; - static struct harddisk_info *last_disk = 0; - static sector_t last_sector = (sector_t) -1; - uint8_t *buf; - uint32_t hw_sector; - - //printk_debug("sector=%Ld\n", sector); - - if (info->hw_sector_size == CDROM_SECTOR_SIZE) { - buf = cdbuffer; - hw_sector = sector >> 2; - } else { - buf = buffer; - hw_sector = sector; - } - - if (buf==buffer || info != last_disk || hw_sector != last_sector) { - //printk_debug("hw_sector=%u\n", hw_sector); - memset(packet, 0, sizeof packet); - packet[0] = 0x28; /* READ */ - packet[2] = hw_sector >> 24; - packet[3] = hw_sector >> 16; - packet[4] = hw_sector >> 8; - packet[5] = hw_sector >> 0; - packet[7] = 0; - packet[8] = 1; /* length */ - - if (pio_packet(info, 1, packet, sizeof packet, - buf, info->hw_sector_size) != 0) { - printk_debug("read error\n"); - return -1; - } - last_disk = info; - last_sector = hw_sector; - } - - if (buf != buffer) - memcpy(buffer, &cdbuffer[(sector & 3) << 9], IDE_SECTOR_SIZE); - return 0; -} - -int ide_read(int drive, sector_t sector, void *buffer) -{ - struct harddisk_info *info = &harddisk_info[drive]; - int result; - - //printk_debug("drive=%d, sector=%ld\n",drive,(unsigned long) sector); - /* Report the buffer is empty */ - if (sector > info->sectors) { - return -1; - } - if (info->address_mode == ADDRESS_MODE_CHS) { - result = ide_read_sector_chs(info, buffer, sector); - } - else if (info->address_mode == ADDRESS_MODE_LBA) { - result = ide_read_sector_lba(info, buffer, sector); - } - else if (info->address_mode == ADDRESS_MODE_LBA48) { - result = ide_read_sector_lba48(info, buffer, sector); - } - else if (info->address_mode == ADDRESS_MODE_PACKET) { - result = ide_read_sector_packet(info, buffer, sector); - } - else { - result = -1; - } - return result; -} - -static int init_drive(struct harddisk_info *info, struct controller *ctrl, - int slave, int drive, unsigned char *buffer, int ident_command) -{ - uint16_t* drive_info; - struct ide_pio_command cmd; - int i; - - info->ctrl = ctrl; - info->heads = 0u; - info->cylinders = 0u; - info->sectors_per_track = 0u; - info->address_mode = IDE_DH_CHS; - info->sectors = 0ul; - info->drive_exists = 0; - info->slave_absent = 0; - info->removable = 0; - info->hw_sector_size = IDE_SECTOR_SIZE; - info->slave = slave?IDE_DH_SLAVE: IDE_DH_MASTER; - - printk_debug("Testing for hd%c\n", 'a'+drive); - - /* Select the drive that we are testing */ - outb(IDE_DH_DEFAULT | IDE_DH_HEAD(0) | IDE_DH_CHS | info->slave, - IDE_REG_DEVICE(ctrl)); - mdelay(50); - - /* Test to see if the drive registers exist, - * In many cases this quickly rules out a missing drive. - */ - for(i = 0; i < 4; i++) { - outb(0xaa + i, (ctrl->cmd_base) + 2 + i); - } - for(i = 0; i < 4; i++) { - if (inb((ctrl->cmd_base) + 2 + i) != 0xaa + i) { - return 1; - } - } - for(i = 0; i < 4; i++) { - outb(0x55 + i, (ctrl->cmd_base) + 2 + i); - } - for(i = 0; i < 4; i++) { - if (inb((ctrl->cmd_base) + 2 + i) != 0x55 + i) { - return 1; - } - } - printk_debug("Probing for hd%c\n", 'a'+drive); - - memset(&cmd, 0, sizeof(cmd)); - cmd.device = IDE_DH_DEFAULT | IDE_DH_HEAD(0) | IDE_DH_CHS | info->slave; - cmd.command = ident_command; - - if (pio_data_in(ctrl, &cmd, buffer, IDE_SECTOR_SIZE) < 0) { - /* Well, if that command didn't work, we probably don't have drive. */ - return 1; - } - - /* Now suck the data out */ - drive_info = (uint16_t *)buffer; - if (drive_info[2] == 0x37C8) { - /* If the response is incomplete spin up the drive... */ - memset(&cmd, 0, sizeof(cmd)); - cmd.device = IDE_DH_DEFAULT | IDE_DH_HEAD(0) | IDE_DH_CHS | - info->slave; - cmd.feature = IDE_FEATURE_STANDBY_SPINUP_DRIVE; - if (pio_non_data(ctrl, &cmd) < 0) { - /* If the command doesn't work give up on the drive */ - return 1; - } - - } - if ((drive_info[2] == 0x37C8) || (drive_info[2] == 0x8C73)) { - /* The response is incomplete retry the drive info command */ - memset(&cmd, 0, sizeof(cmd)); - cmd.device = IDE_DH_DEFAULT | IDE_DH_HEAD(0) | IDE_DH_CHS | - info->slave; - cmd.command = ident_command; - if (pio_data_in(ctrl, &cmd, buffer, IDE_SECTOR_SIZE) < 0) { - /* If the command didn't work give up on the drive. */ - return 1; - } - } - if ((drive_info[2] != 0x37C8) && - (drive_info[2] != 0x738C) && - (drive_info[2] != 0x8C73) && - (drive_info[2] != 0xC837) && - (drive_info[2] != 0x0000)) { - printk_info("Invalid IDE Configuration: %hx\n", drive_info[2]); - return 1; - } - for(i = 27; i < 47; i++) { - info->model_number[((i-27)<< 1)] = (drive_info[i] >> 8) & 0xff; - info->model_number[((i-27)<< 1)+1] = drive_info[i] & 0xff; - } - info->model_number[40] = '\0'; - info->drive_exists = 1; - - /* See if LBA is supported */ - if (ident_command == IDE_CMD_IDENTIFY_PACKET_DEVICE) { - info->address_mode = ADDRESS_MODE_PACKET; - info->removable = 1; /* XXX */ - } else if (drive_info[49] & (1 << 9)) { - info->address_mode = ADDRESS_MODE_LBA; - info->sectors = (drive_info[61] << 16) | (drive_info[60]); - printk_debug("LBA mode, sectors=%Ld\n", info->sectors); - /* Enable LBA48 mode if it is present */ - if (drive_info[83] & (1 <<10)) { - /* Should LBA48 depend on LBA? */ - info->address_mode = ADDRESS_MODE_LBA48; - info->sectors = - (((sector_t)drive_info[103]) << 48) | - (((sector_t)drive_info[102]) << 32) | - (((sector_t)drive_info[101]) << 16) | - (((sector_t)drive_info[100]) << 0); - printk_debug("LBA48 mode, sectors=%Ld\n", info->sectors); - } - } else { - info->address_mode = ADDRESS_MODE_CHS; - info->heads = drive_info[3]; - info->cylinders = drive_info[1]; - info->sectors_per_track = drive_info[6]; - info->sectors = - info->sectors_per_track * - info->heads * - info->cylinders; - printk_debug("CHS mode, sectors_per_track=[%d], heads=[%d], cylinders=[%d]\n", - info->sectors_per_track, - info->heads, - info->cylinders); - printk_debug("sectors=%Ld\n", info->sectors); - } - /* See if we have a slave */ - if (!info->slave && (((drive_info[93] >> 14) & 3) == 1)) { - info->slave_absent = !(drive_info[93] & (1 << 5)); - } - - /* See if we need to put the device in CFA power mode 1 */ - if ((drive_info[160] & ((1 << 15) | (1 << 13)| (1 << 12))) == - ((1 << 15) | (1 << 13)| (1 << 12))) { - memset(&cmd, 0, sizeof(cmd)); - cmd.device = IDE_DH_DEFAULT | IDE_DH_HEAD(0) | IDE_DH_CHS | info->slave; - cmd.feature = IDE_FEATURE_CFA_ENABLE_POWER_MODE1; - if (pio_non_data(ctrl, &cmd) < 0) { - /* If I need to power up the drive, and I can't - * give up. - */ - printk_info("Cannot power up CFA device\n"); - return 1; - } - } - - /* Some extra steps for older drives.. */ - if (info->address_mode != ADDRESS_MODE_PACKET) { - /* Initialize drive parameters - * This is an obsolete command (disappeared as of ATA-6) - * but old drives need it before accessing media. */ - memset(&cmd, 0, sizeof(cmd)); - cmd.device = IDE_DH_DEFAULT | IDE_DH_HEAD(drive_info[3] - 1) - | info->slave; - cmd.sector_count = drive_info[6]; - cmd.command = IDE_CMD_INITIALIZE_DRIVE_PARAMETERS; - printk_debug("Init device params... "); - if (pio_non_data(ctrl, &cmd) < 0) - printk_debug("failed (ok for newer drives)\n"); - else - printk_debug("ok\n"); - } - - printk_info("hd%c: %s", - 'a'+drive, - (info->address_mode==ADDRESS_MODE_CHS) ? "CHS" : - (info->address_mode==ADDRESS_MODE_LBA) ? "LBA" : - (info->address_mode==ADDRESS_MODE_LBA48) ? "LBA48" : - (info->address_mode==ADDRESS_MODE_PACKET) ? "ATAPI" : "???"); - - if (info->sectors > (10LL*1000*1000*1000/512)) - printk_info(" %uGB", (unsigned) (info->sectors / (1000*1000*1000/512))); - else if (info->sectors > (10*1000*1000/512)) - printk_info(" %uMB", (unsigned) (info->sectors / (1000*1000/512))); - else if (info->sectors > 0) - printk_info(" %uKB", (unsigned) (info->sectors / 2)); - printk_info(": %s\n", info->model_number); - - return 0; -} - -/* Experimental floating bus detection - * As Eric mentions, we get stuck when the bus has no drive - * and floating high. To avoid this, try some heuristics. - * This is based on a paper on Phoenix website. --ts1 */ -static int ide_bus_floating(struct controller *ctrl) -{ - unsigned long timeout; - unsigned char status; - - /* Test 1: if status reads 0xff, probably no device is present - * on the bus. Repeat this for 20msec. */ - timeout = 20; - status = 0; - do { - /* Take logical OR to avoid chattering */ - status |= inb(IDE_REG_STATUS(ctrl)); - /* If it makes 0xff, it's possible to be floating, - * do test2 to ensure. */ - if (status == 0xff) - goto test2; - /* If BSY bit is not set, it's harmless to continue probing. */ - if ((status & IDE_STATUS_BSY) == 0) - return 0; - udelay(1000); - } while (timeout > 0); - /* Timed out. Logical ORed status didn't make 0xFF. - * We have something there. */ - return 0; - -test2: - /* Test 2: write something to registers, then read back and - * compare. Note that ATA spec inhibits this while BSY is set, - * but for many drives this works. This is a confirmation step anyway. - */ - outb(0xaa, ctrl->cmd_base + 2); - outb(0x55, ctrl->cmd_base + 3); - outb(0xff, ctrl->cmd_base + 4); - if (inb(ctrl->cmd_base+2) == 0xaa - && inb(ctrl->cmd_base+3) == 0x55 - && inb(ctrl->cmd_base+4) == 0xff) { - /* We have some registers there. - * Though this does not mean it is not a NIC or something... */ - return 0; - } - - /* Status port is 0xFF, and other registers are not there. - * Most certainly this bus is floating. */ - printk_info("Detected floating bus\n"); - return 1; -} - -static int init_controller(struct controller *ctrl, int drive, unsigned char *buffer) -{ - struct harddisk_info *info; - - /* Put the drives ide channel in a know state and wait - * for the drives to spinup. - * - * In practice IDE disks tend not to respond to commands until - * they have spun up. This makes IDE hard to deal with - * immediately after power up, as the delays can be quite - * long, so we must be very careful here. - * - * There are two pathological cases that must be dealt with: - * - * - The BSY bit not being set while the IDE drives spin up. - * In this cases only a hard coded delay will work. As - * I have not reproduced it, and this is out of spec for - * IDE drives the work around can be enabled by setting - * BSY_SET_DURING_SPINUP to 0. - * - * - The BSY bit floats high when no drives are plugged in. - * This case will not be detected except by timing out but - * we avoid the problems by only probing devices we are - * supposed to boot from. If we don't do the probe we - * will not experience the problem. - * - * So speed wise I am only slow if the BSY bit is not set - * or not reported by the IDE controller during spinup, which - * is quite rare. - * - */ -#if !BSY_SET_DURING_SPINUP - if (await_ide(timeout, ctrl, IDE_TIMEOUT) < 0) { - return -1; - } -#endif - /* ts1: Try some heuristics to avoid waiting for floating bus */ - if (ide_bus_floating(ctrl)) - return -1; - - if (ide_software_reset(ctrl) < 0) { - return -1; - } - - /* Note: I have just done a software reset. It may be - * reasonable to just read the boot time signatures - * off of the drives to see if they are present. - * - * For now I will go with just sending commands to the drives - * and assuming filtering out missing drives by detecting registers - * that won't set and commands that fail to execute properly. - */ - - /* Now initialize the individual drives */ - info = &harddisk_info[drive]; - init_drive(info, ctrl, 0, drive, buffer, IDE_CMD_IDENTIFY_DEVICE); - if (!info->drive_exists) - init_drive(info, ctrl, 0, drive, buffer, - IDE_CMD_IDENTIFY_PACKET_DEVICE); -#ifdef CHECK_FOR_SLAVES - if (info->drive_exists && !info->slave_absent) { - drive++; - info++; - init_drive(info, ctrl, 1, drive, buffer, - IDE_CMD_IDENTIFY_DEVICE); - if (!info->drive_exists) - init_drive(info, ctrl, 1, drive, buffer, - IDE_CMD_IDENTIFY_PACKET_DEVICE); - } -#endif - - return 0; -} - -static int -atapi_request_sense(struct harddisk_info *info, uint8_t *asc, uint8_t *ascq) -{ - uint8_t packet[12]; - uint8_t buf[18]; - - memset(packet, 0, sizeof packet); - packet[0] = 0x03; /* REQUEST SENSE */ - packet[4] = sizeof buf; - if (pio_packet(info, 1, packet, sizeof packet, buf, sizeof buf) != 0) - return -1; - - if (asc) - *asc = buf[12]; - if (ascq) - *ascq = buf[13]; - return 0; -} - -static int atapi_detect_medium(struct harddisk_info *info) -{ - uint8_t packet[12]; - uint8_t buf[8]; - uint32_t block_len, sectors; - unsigned long timeout; - uint8_t asc, ascq; - int in_progress; - - memset(packet, 0, sizeof packet); - packet[0] = 0x25; /* READ CAPACITY */ - - /* Retry READ CAPACITY for 5 seconds unless MEDIUM NOT PRESENT - * is reported by the drive. If the drive reports "IN PROGRESS", - * 30 seconds is added. */ - timeout = 5000; - in_progress = 0; - while (timeout > 0) { - if (pio_packet(info, 1, packet, sizeof packet, buf, sizeof buf) - == 0) - goto ok; - - if (atapi_request_sense(info, &asc, &ascq) == 0) { - if (asc == 0x3a) { /* MEDIUM NOT PRESENT */ - printk_debug("Device reports MEDIUM NOT PRESENT\n"); - return -1; - } - - if (asc == 0x04 && ascq == 0x01 && !in_progress) { - /* IN PROGRESS OF BECOMING READY */ - printk_info("Waiting for drive to detect " - "the medium... "); - /* Allow 30 seconds more */ - timeout = 30000; - in_progress = 1; - } - } - - udelay(1000); - } - printk_debug("read capacity failed\n"); - return -1; -ok: - - block_len = (uint32_t) buf[4] << 24 - | (uint32_t) buf[5] << 16 - | (uint32_t) buf[6] << 8 - | (uint32_t) buf[7] << 0; - if (block_len != IDE_SECTOR_SIZE && block_len != CDROM_SECTOR_SIZE) { - printk_info("Unsupported sector size %u\n", block_len); - return -1; - } - info->hw_sector_size = block_len; - - sectors = (uint32_t) buf[0] << 24 - | (uint32_t) buf[1] << 16 - | (uint32_t) buf[2] << 8 - | (uint32_t) buf[3] << 0; - - if (info->hw_sector_size == CDROM_SECTOR_SIZE) - sectors <<= 2; /* # of sectors in 512-byte "soft" sector */ - if (sectors != info->sectors) - printk_info("%uMB medium detected\n", sectors>>(20-9)); - info->sectors = sectors; - return 0; -} - -static int detect_medium(struct harddisk_info *info) -{ - if (info->address_mode == ADDRESS_MODE_PACKET) { - if (atapi_detect_medium(info) != 0) - return -1; - } else { - printk_debug("not implemented for non-ATAPI device\n"); - return -1; - } - return 0; -} - -static int find_ide_controller_compat(struct controller *ctrl, int index) -{ - if (index >= IDE_MAX_CONTROLLERS) - return -1; - ctrl->cmd_base = ide_base[index]; - ctrl->ctrl_base = ide_base[index] + IDE_REG_EXTENDED_OFFSET; - return 0; -} - -static int find_ide_controller(struct controller *ctrl, int ctrl_index) -{ - int pci_index; - struct device *dev = 0; - unsigned int mask; - unsigned int prog_if; - - /* A PCI IDE controller has two channels (pri, sec) */ - pci_index = ctrl_index >> 1; - - for (;;) { - /* Find a IDE storage class device */ - dev = dev_find_class(0x010100, dev); - if (!dev) { - printk_debug("PCI IDE #%d not found\n", pci_index); - return -1; - } - - if (pci_index-- == 0) - break; - } - - prog_if = dev->class & 0xff; - printk_debug("found PCI IDE controller %04x:%04x prog_if=%#x\n", - dev->vendor, dev->device, prog_if); - - /* See how this controller is configured */ - mask = (ctrl_index & 1) ? 4 : 1; - printk_debug("%s channel: ", (ctrl_index & 1) ? "secondary" : "primary"); - if (prog_if & mask) { - printk_debug("native PCI mode\n"); - if ((ctrl_index & 1) == 0) { - /* Primary channel */ - ctrl->cmd_base = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - ctrl->ctrl_base = pci_read_config32(dev, PCI_BASE_ADDRESS_1); - } else { - /* Secondary channel */ - ctrl->cmd_base = pci_read_config32(dev, PCI_BASE_ADDRESS_2); - ctrl->ctrl_base = pci_read_config32(dev, PCI_BASE_ADDRESS_3); - } - ctrl->cmd_base &= ~3; - ctrl->ctrl_base &= ~3; - } else { - printk_debug("compatibility mode\n"); - if (find_ide_controller_compat(ctrl, ctrl_index) != 0) - return -1; - } - return 0; -} - -int ide_probe(int drive) -{ - struct controller *ctrl; - int ctrl_index; - struct harddisk_info *info; - - if (drive >= IDE_MAX_DRIVES) { - printk_info("Unsupported drive number\n"); - return -1; - } - - /* A controller has two drives (master, slave) */ - ctrl_index = drive >> 1; - - ctrl = &controllers[ctrl_index]; - if (ctrl->cmd_base == 0) { - if (find_ide_controller(ctrl, ctrl_index) != 0) { - printk_info("IDE channel %d not found\n", ctrl_index); - return -1; - } - if (init_controller(ctrl, drive & ~1, ide_buffer) != 0) { - printk_info("No drive detected on IDE channel %d\n", - ctrl_index); - return -1; - } - } - info = &harddisk_info[drive]; - if (!info->drive_exists) { - printk_info("Drive %d does not exist\n", drive); - return -1; - } - - if (info->removable) { - if (detect_medium(info) != 0) { - printk_info("Media detection failed\n"); - return -1; - } - } - - return 0; -} - -/* vim:set sts=8 sw=8: */ diff --git a/src/southbridge/intel/i82801ca/Config.lb b/src/southbridge/intel/i82801ca/Config.lb index 60ae38cb35..0f1911b6e3 100644 --- a/src/southbridge/intel/i82801ca/Config.lb +++ b/src/southbridge/intel/i82801ca/Config.lb @@ -1,16 +1,8 @@ -uses CONFIG_IDE - config chip.h driver i82801ca.o - driver i82801ca_usb.o - driver i82801ca_lpc.o - -if CONFIG_IDE - driver i82801ca_ide.o -end - +driver i82801ca_ide.o driver i82801ca_ac97.o #driver i82801ca_nic.o driver i82801ca_pci.o diff --git a/src/southbridge/intel/i82801ca/Makefile.inc b/src/southbridge/intel/i82801ca/Makefile.inc index 84e1bd3f20..587b06780c 100644 --- a/src/southbridge/intel/i82801ca/Makefile.inc +++ b/src/southbridge/intel/i82801ca/Makefile.inc @@ -1,9 +1,7 @@ driver-y += i82801ca.o driver-y += i82801ca_usb.o driver-y += i82801ca_lpc.o - -driver-$(CONFIG_IDE) += i82801ca_ide.o - +driver-y += i82801ca_ide.o driver-y += i82801ca_ac97.o #driver-y += i82801ca_nic.o driver-y += i82801ca_pci.o diff --git a/src/southbridge/via/vt8231/vt8231.c b/src/southbridge/via/vt8231/vt8231.c index 71874cba57..d270a6b90b 100644 --- a/src/southbridge/via/vt8231/vt8231.c +++ b/src/southbridge/via/vt8231/vt8231.c @@ -7,7 +7,6 @@ #include <pc80/mc146818rtc.h> #include <pc80/keyboard.h> -#include "vt8231.h" #include "chip.h" /* Base 8231 controller */ diff --git a/src/southbridge/via/vt8231/vt8231.h b/src/southbridge/via/vt8231/vt8231.h deleted file mode 100644 index c8e79fc480..0000000000 --- a/src/southbridge/via/vt8231/vt8231.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - - /* winbond access routines and defines*/ - -/* from the winbond data sheet - - The W83C553F SIO controller with PCI arbiter is a multi-function PCI device. - Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller. -*/ - -/*ISA bridge configuration space*/ - -#define W83C553F_VID 0x10AD -#define W83C553F_DID 0x0565 -#define W83C553F_IDE 0x0105 - -/* Function 0 registers */ -#define W83C553F_PCICONTR 0x40 /*pci control reg*/ -#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/ -#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/ -#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/ -#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/ -#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/ -#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/ -#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/ -#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/ -#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/ -#define W83C553F_CDR 0x4c /*Clock Divisor Register*/ -#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/ -#define W83C553F_ATSCR 0x4e /*AT System Control register*/ -#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/ -#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/ -#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/ -#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/ -#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/ - -/* Function 1 registers */ -#define W83C553F_PIR 0x09 /*Programming Interface Register*/ -#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/ - -/* register bit definitions */ -#define W83C553F_IPADCR_MBE512 0x1 -#define W83C553F_IPADCR_MBE640 0x2 -#define W83C553F_IPADCR_IPATOM4 0x10 -#define W83C553F_IPADCR_IPATOM5 0x20 -#define W83C553F_IPADCR_IPATOM6 0x40 -#define W83C553F_IPADCR_IPATOM7 0x80 - -#define W83C553F_CSCR_UBIOSCSE 0x10 -#define W83C553F_CSCR_BIOSWP 0x20 - -#define W83C553F_IDECSR_P0EN 0x01 -#define W83C553F_IDECSR_P0F16 0x02 -#define W83C553F_IDECSR_P1EN 0x10 -#define W83C553F_IDECSR_P1F16 0x20 -#define W83C553F_IDECSR_LEGIRQ 0x800 - -#define W83C553F_ATSCR_ISARE 0x40 -#define W83C553F_ATSCR_FERRE 0x10 -#define W83C553F_ATSCR_P92E 0x04 -#define W83C553F_ATSCR_KRCEE 0x02 -#define W83C553F_ATSCR_KGA20EE 0x01 - -#define W83C553F_PIR_BM 0x80 -#define W83C553F_PIR_P1PROG 0x08 -#define W83C553F_PIR_P1NL 0x04 -#define W83C553F_PIR_P0PROG 0x02 -#define W83C553F_PIR_P0NL 0x01 - -/* - * Interrupt controller - */ -#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0 -#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1 - -#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43 - -/* - * DMA controller - */ -#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */ -#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */ - -/* command/status register bit definitions */ - -#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */ -#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */ -#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */ -#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */ - -#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */ -#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */ -#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */ -#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */ - -#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */ -#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */ -#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */ -#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */ - -/* mode register bit definitions */ - -#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */ -#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */ -#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */ -#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */ -#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */ -#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */ -#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */ -#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */ -#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */ -#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */ -#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* request register bit definitions */ - -#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */ -#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* write single mask bit register bit definitions */ - -#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */ -#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* read/write all mask bits register bit definitions */ - -#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */ -#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */ -#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */ -#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */ - -/* typedefs */ - -#define W83C553F_DMA1_CS 0x8 -#define W83C553F_DMA1_WR 0x9 -#define W83C553F_DMA1_WSMB 0xA -#define W83C553F_DMA1_WM 0xB -#define W83C553F_DMA1_CBP 0xC -#define W83C553F_DMA1_MC 0xD -#define W83C553F_DMA1_CM 0xE -#define W83C553F_DMA1_RWAMB 0xF - -#define W83C553F_DMA2_CS 0xD0 -#define W83C553F_DMA2_WR 0xD2 -#define W83C553F_DMA2_WSMB 0xD4 -#define W83C553F_DMA2_WM 0xD6 -#define W83C553F_DMA2_CBP 0xD8 -#define W83C553F_DMA2_MC 0xDA -#define W83C553F_DMA2_CM 0xDC -#define W83C553F_DMA2_RWAMB 0xDE - -void initialise_w83c553f(void); diff --git a/src/southbridge/via/vt8231/vt8231_acpi.c b/src/southbridge/via/vt8231/vt8231_acpi.c index 2f8adc792e..87c5e876fd 100644 --- a/src/southbridge/via/vt8231/vt8231_acpi.c +++ b/src/southbridge/via/vt8231/vt8231_acpi.c @@ -3,7 +3,6 @@ #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> -#include "vt8231.h" static void acpi_init(struct device *dev) { diff --git a/src/southbridge/via/vt8231/vt8231_ide.c b/src/southbridge/via/vt8231/vt8231_ide.c index 3cfa01ea45..c17ab2edd9 100644 --- a/src/southbridge/via/vt8231/vt8231_ide.c +++ b/src/southbridge/via/vt8231/vt8231_ide.c @@ -3,7 +3,6 @@ #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> -#include "vt8231.h" #include "chip.h" static void ide_init(struct device *dev) diff --git a/src/southbridge/via/vt8231/vt8231_lpc.c b/src/southbridge/via/vt8231/vt8231_lpc.c index fb2f29be61..cee46b51bb 100644 --- a/src/southbridge/via/vt8231/vt8231_lpc.c +++ b/src/southbridge/via/vt8231/vt8231_lpc.c @@ -6,7 +6,6 @@ #include <pc80/mc146818rtc.h> -#include "vt8231.h" #include "chip.h" /* PIRQ init diff --git a/src/southbridge/via/vt8231/vt8231_nic.c b/src/southbridge/via/vt8231/vt8231_nic.c index 79a21b5de9..828cdaf2f6 100644 --- a/src/southbridge/via/vt8231/vt8231_nic.c +++ b/src/southbridge/via/vt8231/vt8231_nic.c @@ -3,7 +3,6 @@ #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> -#include "vt8231.h" /* * Enable the ethernet device and turn off stepping (because it is integrated diff --git a/src/southbridge/via/vt8235/vt8235.c b/src/southbridge/via/vt8235/vt8235.c index dfb7f6bbed..8e2abb79db 100644 --- a/src/southbridge/via/vt8235/vt8235.c +++ b/src/southbridge/via/vt8235/vt8235.c @@ -5,7 +5,6 @@ #include <device/pci_ids.h> #include <pc80/keyboard.h> #include <pc80/i8259.h> -#include "vt8235.h" #include "chip.h" /* diff --git a/src/southbridge/via/vt8235/vt8235.h b/src/southbridge/via/vt8235/vt8235.h deleted file mode 100644 index c8e79fc480..0000000000 --- a/src/southbridge/via/vt8235/vt8235.h +++ /dev/null @@ -1,195 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - - /* winbond access routines and defines*/ - -/* from the winbond data sheet - - The W83C553F SIO controller with PCI arbiter is a multi-function PCI device. - Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller. -*/ - -/*ISA bridge configuration space*/ - -#define W83C553F_VID 0x10AD -#define W83C553F_DID 0x0565 -#define W83C553F_IDE 0x0105 - -/* Function 0 registers */ -#define W83C553F_PCICONTR 0x40 /*pci control reg*/ -#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/ -#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/ -#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/ -#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/ -#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/ -#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/ -#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/ -#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/ -#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/ -#define W83C553F_CDR 0x4c /*Clock Divisor Register*/ -#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/ -#define W83C553F_ATSCR 0x4e /*AT System Control register*/ -#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/ -#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/ -#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/ -#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/ -#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/ - -/* Function 1 registers */ -#define W83C553F_PIR 0x09 /*Programming Interface Register*/ -#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/ - -/* register bit definitions */ -#define W83C553F_IPADCR_MBE512 0x1 -#define W83C553F_IPADCR_MBE640 0x2 -#define W83C553F_IPADCR_IPATOM4 0x10 -#define W83C553F_IPADCR_IPATOM5 0x20 -#define W83C553F_IPADCR_IPATOM6 0x40 -#define W83C553F_IPADCR_IPATOM7 0x80 - -#define W83C553F_CSCR_UBIOSCSE 0x10 -#define W83C553F_CSCR_BIOSWP 0x20 - -#define W83C553F_IDECSR_P0EN 0x01 -#define W83C553F_IDECSR_P0F16 0x02 -#define W83C553F_IDECSR_P1EN 0x10 -#define W83C553F_IDECSR_P1F16 0x20 -#define W83C553F_IDECSR_LEGIRQ 0x800 - -#define W83C553F_ATSCR_ISARE 0x40 -#define W83C553F_ATSCR_FERRE 0x10 -#define W83C553F_ATSCR_P92E 0x04 -#define W83C553F_ATSCR_KRCEE 0x02 -#define W83C553F_ATSCR_KGA20EE 0x01 - -#define W83C553F_PIR_BM 0x80 -#define W83C553F_PIR_P1PROG 0x08 -#define W83C553F_PIR_P1NL 0x04 -#define W83C553F_PIR_P0PROG 0x02 -#define W83C553F_PIR_P0NL 0x01 - -/* - * Interrupt controller - */ -#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0 -#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1 - -#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43 - -/* - * DMA controller - */ -#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */ -#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */ - -/* command/status register bit definitions */ - -#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */ -#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */ -#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */ -#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */ - -#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */ -#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */ -#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */ -#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */ - -#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */ -#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */ -#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */ -#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */ - -/* mode register bit definitions */ - -#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */ -#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */ -#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */ -#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */ -#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */ -#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */ -#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */ -#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */ -#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */ -#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */ -#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* request register bit definitions */ - -#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */ -#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* write single mask bit register bit definitions */ - -#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */ -#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* read/write all mask bits register bit definitions */ - -#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */ -#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */ -#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */ -#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */ - -/* typedefs */ - -#define W83C553F_DMA1_CS 0x8 -#define W83C553F_DMA1_WR 0x9 -#define W83C553F_DMA1_WSMB 0xA -#define W83C553F_DMA1_WM 0xB -#define W83C553F_DMA1_CBP 0xC -#define W83C553F_DMA1_MC 0xD -#define W83C553F_DMA1_CM 0xE -#define W83C553F_DMA1_RWAMB 0xF - -#define W83C553F_DMA2_CS 0xD0 -#define W83C553F_DMA2_WR 0xD2 -#define W83C553F_DMA2_WSMB 0xD4 -#define W83C553F_DMA2_WM 0xD6 -#define W83C553F_DMA2_CBP 0xD8 -#define W83C553F_DMA2_MC 0xDA -#define W83C553F_DMA2_CM 0xDC -#define W83C553F_DMA2_RWAMB 0xDE - -void initialise_w83c553f(void); diff --git a/src/southbridge/via/vt8235/vt8235_ide.c b/src/southbridge/via/vt8235/vt8235_ide.c index 47d1b05a1e..9c2af3c781 100644 --- a/src/southbridge/via/vt8235/vt8235_ide.c +++ b/src/southbridge/via/vt8235/vt8235_ide.c @@ -3,7 +3,6 @@ #include <device/pci_ops.h> #include <device/pci_ids.h> #include <console/console.h> -#include "vt8235.h" #include "chip.h" static void ide_init(struct device *dev) diff --git a/src/southbridge/via/vt8235/vt8235_lpc.c b/src/southbridge/via/vt8235/vt8235_lpc.c index 67f602b9b4..052c4c9415 100644 --- a/src/southbridge/via/vt8235/vt8235_lpc.c +++ b/src/southbridge/via/vt8235/vt8235_lpc.c @@ -7,7 +7,6 @@ #include <pc80/mc146818rtc.h> -#include "vt8235.h" #include "chip.h" /* The epia-m is really short on interrupts available, so PCI interupts A & D are ganged togther and so are B & C. diff --git a/src/southbridge/via/vt8235/vt8235_nic.c b/src/southbridge/via/vt8235/vt8235_nic.c index 6051c5843b..09ea17e078 100644 --- a/src/southbridge/via/vt8235/vt8235_nic.c +++ b/src/southbridge/via/vt8235/vt8235_nic.c @@ -3,7 +3,6 @@ #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> -#include "vt8235.h" /* * Enable the ethernet device and turn off stepping (because it is integrated diff --git a/src/southbridge/via/vt8235/vt8235_usb.c b/src/southbridge/via/vt8235/vt8235_usb.c index 7992602146..2318465058 100644 --- a/src/southbridge/via/vt8235/vt8235_usb.c +++ b/src/southbridge/via/vt8235/vt8235_usb.c @@ -3,7 +3,6 @@ #include <device/pci.h> #include <device/pci_ops.h> #include <device/pci_ids.h> -#include "vt8235.h" /* really nothing to do here, both usb 1.1 & 2.0 are normal PCI devices and so get resources allocated properly. They are part of the southbridge and are enabled in the chip enable function for the southbridge */ @@ -43,4 +42,4 @@ static const struct pci_driver northbridge_driver __pci_driver = { .vendor = PCI_VENDOR_ID_VIA, .device = PCI_DEVICE_ID_VIA_82C586_2, }; -*/
\ No newline at end of file +*/ diff --git a/src/southbridge/winbond/Kconfig b/src/southbridge/winbond/Kconfig deleted file mode 100644 index 9ca0c3ee40..0000000000 --- a/src/southbridge/winbond/Kconfig +++ /dev/null @@ -1 +0,0 @@ -source src/southbridge/winbond/w83c553/Kconfig diff --git a/src/southbridge/winbond/Makefile.inc b/src/southbridge/winbond/Makefile.inc deleted file mode 100644 index 7926be7e9c..0000000000 --- a/src/southbridge/winbond/Makefile.inc +++ /dev/null @@ -1 +0,0 @@ -subdirs-$(CONFIG_SOUTHBRIDGE_WINBOND_W83C553) += w83c553 diff --git a/src/southbridge/winbond/w83c553/Config.lb b/src/southbridge/winbond/w83c553/Config.lb deleted file mode 100644 index 8bc503fbf2..0000000000 --- a/src/southbridge/winbond/w83c553/Config.lb +++ /dev/null @@ -1,4 +0,0 @@ -#config chip.h -#object w83c553f.o -driver w83c553f.o -driver w83c553f_ide.o diff --git a/src/southbridge/winbond/w83c553/Kconfig b/src/southbridge/winbond/w83c553/Kconfig deleted file mode 100644 index 4f28b2ea3c..0000000000 --- a/src/southbridge/winbond/w83c553/Kconfig +++ /dev/null @@ -1,2 +0,0 @@ -config SOUTHBRIDGE_WINBOND_W83C553 - bool diff --git a/src/southbridge/winbond/w83c553/Makefile.inc b/src/southbridge/winbond/w83c553/Makefile.inc deleted file mode 100644 index ef1156822f..0000000000 --- a/src/southbridge/winbond/w83c553/Makefile.inc +++ /dev/null @@ -1,2 +0,0 @@ -driver-y += w83c553f.o -driver-y += w83c553f_ide.o diff --git a/src/southbridge/winbond/w83c553/chip.h b/src/southbridge/winbond/w83c553/chip.h deleted file mode 100644 index 20a9a693ff..0000000000 --- a/src/southbridge/winbond/w83c553/chip.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _SOUTHBRIDGE_WINBOND_W83C553 -#define _SOUTHBRIDGE_WINBOND_W83C553 - -extern struct chip_operations southbridge_winbond_w83c553_control; - -struct southbridge_winbond_w83c553_config { -}; - -#endif /* _SOUTHBRIDGE_WINBOND_W83C553 */ diff --git a/src/southbridge/winbond/w83c553/w83c553f.c b/src/southbridge/winbond/w83c553/w83c553f.c deleted file mode 100644 index 8f70ff032b..0000000000 --- a/src/southbridge/winbond/w83c553/w83c553f.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Andreas Heppel <aheppel@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Initialisation of the PCI-to-ISA bridge and disabling the BIOS - * write protection (for flash) in function 0 of the chip. - * Enabling function 1 (IDE controller of the chip. - */ - -#ifndef CONFIG_ISA_IO -#define CONFIG_ISA_IO 0xFE000000 -#endif - -#include <arch/io.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <console/console.h> -#include "w83c553f.h" - -void initialise_pic(void); -void initialise_dma(void); - -static void -w83c553_init(struct device *dev) -{ - printk_info("Configure W83C553F ISA Bridge (Function 0)\n"); - -#if 0 - /* - * Set ISA memory space NOT SURE ABOUT THIS??? - */ - reg8 = pci_read_config8(dev, W83C553F_IPADCR); - /* 16 MB ISA memory space */ - reg8 |= (W83C553F_IPADCR_IPATOM4 | W83C553F_IPADCR_IPATOM5 | W83C553F_IPADCR_IPATOM6 | W83C553F_IPADCR_IPATOM7); - reg8 &= ~W83C553F_IPADCR_MBE512; - pci_write_config8(dev, W83C553F_IPADCR, reg8); - - /* - * Chip select: switch off BIOS write protection - */ - reg8 = pci_read_config8(dev, W83C553F_CSCR); - reg8 |= W83C553F_CSCR_UBIOSCSE; - reg8 &= ~W83C553F_CSCR_BIOSWP; - pci_write_config8(dev, W83C553F_CSCR, reg8); - - /* - * Enable Port 92 - */ - reg8 = W83C553F_ATSCR_P92E | W83C553F_ATSCR_KRCEE; - pci_write_config8(dev, W83C553F_CSCR, reg8); - - /* - * Route IDE interrupts to IRQ 14 & 15 on 8259. - */ - pci_write_config8(dev, W83C553F_IDEIRCR, 0x90); - pci_write_config16(dev, W83C553F_PCIIRCR, 0xABEF); - - /* - * Initialise ISA interrupt controller - */ - initialise_pic(); - - /* - * Initialise DMA controller - */ - initialise_dma(); -#endif - - printk_info("W83C553F configuration complete\n"); -} - -void initialise_pic(void) -{ - outb(W83C553F_PIC1_ICW1, 0x11); /* start init sequence, ICW4 needed */ - outb(W83C553F_PIC1_ICW2, 0x08); /* base address 00001 */ - outb(W83C553F_PIC1_ICW3, 0x04); /* slave on IRQ2 */ - outb(W83C553F_PIC1_ICW4, 0x01); /* x86 mode */ - outb(W83C553F_PIC1_OCW1, 0xfb); /* enable IRQ 2 */ - outb(W83C553F_PIC1_ELC, 0xf8); /* all IRQ's edge sensitive */ - - outb(W83C553F_PIC2_ICW1, 0x11); /* start init sequence, ICW4 needed */ - outb(W83C553F_PIC2_ICW2, 0x08); /* base address 00001 */ - outb(W83C553F_PIC2_ICW3, 0x02); /* slave ID 2 */ - outb(W83C553F_PIC2_ICW4, 0x01); /* x86 mode */ - outb(W83C553F_PIC2_OCW1, 0xff); /* disable all IRQ's */ - outb(W83C553F_PIC2_ELC, 0xde); /* all IRQ's edge sensitive */ - - outb(W83C553F_TMR1_CMOD, 0x74); - - outb(W83C553F_PIC2_OCW1, 0x20); - outb(W83C553F_PIC1_OCW1, 0x20); - - outb(W83C553F_PIC2_OCW1, 0x2b); - outb(W83C553F_PIC1_OCW1, 0x2b); -} - -void initialise_dma(void) -{ - unsigned int channel; - unsigned int rvalue1, rvalue2; - - /* perform a H/W reset of the devices */ - - outb(W83C553F_DMA1 + W83C553F_DMA1_MC, 0x00); - outw(W83C553F_DMA2 + W83C553F_DMA2_MC, 0x0000); - - /* initialise all channels to a sane state */ - - for (channel = 0; channel < 4; channel++) { - /* - * dependent upon the channel, setup the specifics: - * - * demand - * address-increment - * autoinitialize-disable - * verify-transfer - */ - - switch (channel) { - case 0: - rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH0SEL|W83C553F_MODE_TT_VERIFY); - rvalue2 = (W83C553F_MODE_TM_CASCADE|W83C553F_MODE_CH0SEL); - break; - case 1: - rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); - rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH1SEL|W83C553F_MODE_TT_VERIFY); - break; - case 2: - rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); - rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH2SEL|W83C553F_MODE_TT_VERIFY); - break; - case 3: - rvalue1 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); - rvalue2 = (W83C553F_MODE_TM_DEMAND|W83C553F_MODE_CH3SEL|W83C553F_MODE_TT_VERIFY); - break; - default: - rvalue1 = 0x00; - rvalue2 = 0x00; - break; - } - - /* write to write mode registers */ - - outb(W83C553F_DMA1 + W83C553F_DMA1_WM, rvalue1 & 0xFF); - outw(W83C553F_DMA2 + W83C553F_DMA2_WM, rvalue2 & 0x00FF); - } - - /* enable all channels */ - - outb(W83C553F_DMA1 + W83C553F_DMA1_CM, 0x00); - outw(W83C553F_DMA2 + W83C553F_DMA2_CM, 0x0000); - /* - * initialize the global DMA configuration - * - * DACK# active low - * DREQ active high - * fixed priority - * channel group enable - */ - - outb(W83C553F_DMA1 + W83C553F_DMA1_CS, 0x00); - outw(W83C553F_DMA2 + W83C553F_DMA2_CS, 0x0000); -} - -static void w83c553_enable_resources(device_t dev) -{ - pci_dev_enable_resources(dev); - enable_childrens_resources(dev); -} - -static void w83c553_read_resources(device_t dev) -{ - struct resource* res; - - pci_dev_read_resources(dev); - - res = new_resource(dev, 1); - res->base = 0x0UL; - res->size = 0x400UL; - res->limit = 0xffffUL; - res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; - - res = new_resource(dev, 3); /* IOAPIC */ - res->base = 0xfec00000; - res->size = 0x00001000; - res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED; -} - -static struct device_operations w83c553_ops = { - .read_resources = w83c553_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = w83c553_enable_resources, - .init = w83c553_init, - .scan_bus = scan_static_bus, -}; - -static const struct pci_driver w83c553f_pci_driver __pci_driver = { - /* w83c553f */ - .ops = &w83c553_ops, - .device = PCI_DEVICE_ID_WINBOND_83C553, - .vendor = PCI_VENDOR_ID_WINBOND, -}; diff --git a/src/southbridge/winbond/w83c553/w83c553f.h b/src/southbridge/winbond/w83c553/w83c553f.h deleted file mode 100644 index 775b12453f..0000000000 --- a/src/southbridge/winbond/w83c553/w83c553f.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * (C) Copyright 2000 - * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -#ifndef _W83C553_H -#define _W83C553_H - - /* winbond access routines and defines*/ - -/* from the winbond data sheet - - The W83C553F SIO controller with PCI arbiter is a multi-function PCI device. - Function 0 is the ISA bridge, and Function 1 is the bus master IDE controller. -*/ - -/*ISA bridge configuration space*/ - -#define W83C553F_VID 0x10AD -#define W83C553F_DID 0x0565 -#define W83C553F_IDE 0x0105 - -/* Function 0 registers */ -#define W83C553F_PCICONTR 0x40 /*pci control reg*/ -#define W83C553F_SGBAR 0x41 /*scatter/gather base address reg*/ -#define W83C553F_LBCR 0x42 /*Line Buffer Control reg*/ -#define W83C553F_IDEIRCR 0x43 /*IDE Interrupt Routing Control Reg*/ -#define W83C553F_PCIIRCR 0x44 /*PCI Interrupt Routing Control Reg*/ -#define W83C553F_BTBAR 0x46 /*BIOS Timer Base Address Register*/ -#define W83C553F_IPADCR 0x48 /*ISA to PCI Address Decoder Control Register*/ -#define W83C553F_IRADCR 0x49 /*ISA ROM Address Decoder Control Register*/ -#define W83C553F_IPMHSAR 0x4a /*ISA to PCI Memory Hole STart Address Register*/ -#define W83C553F_IPMHSR 0x4b /*ISA to PCI Memory Hols Size Register*/ -#define W83C553F_CDR 0x4c /*Clock Divisor Register*/ -#define W83C553F_CSCR 0x4d /*Chip Select Control Register*/ -#define W83C553F_ATSCR 0x4e /*AT System Control register*/ -#define W83C553F_ATBCR 0x4f /*AT Bus ControL Register*/ -#define W83C553F_IRQBEE0R 0x60 /*IRQ Break Event Enable 0 Register*/ -#define W83C553F_IRQBEE1R 0x61 /*IRQ Break Event Enable 1 Register*/ -#define W83C553F_ABEER 0x62 /*Additional Break Event Enable Register*/ -#define W83C553F_DMABEER 0x63 /*DMA Break Event Enable Register*/ - -/* Function 1 registers */ -#define W83C553F_PIR 0x09 /*Programming Interface Register*/ -#define W83C553F_IDECSR 0x40 /*IDE Control/Status Register*/ - -/* register bit definitions */ -#define W83C553F_IPADCR_MBE512 0x1 -#define W83C553F_IPADCR_MBE640 0x2 -#define W83C553F_IPADCR_IPATOM4 0x10 -#define W83C553F_IPADCR_IPATOM5 0x20 -#define W83C553F_IPADCR_IPATOM6 0x40 -#define W83C553F_IPADCR_IPATOM7 0x80 - -#define W83C553F_CSCR_UBIOSCSE 0x10 -#define W83C553F_CSCR_BIOSWP 0x20 - -#define W83C553F_IDECSR_P0EN 0x01 -#define W83C553F_IDECSR_P0F16 0x02 -#define W83C553F_IDECSR_P1EN 0x10 -#define W83C553F_IDECSR_P1F16 0x20 -#define W83C553F_IDECSR_LEGIRQ 0x800 - -#define W83C553F_ATSCR_ISARE 0x40 -#define W83C553F_ATSCR_FERRE 0x10 -#define W83C553F_ATSCR_P92E 0x04 -#define W83C553F_ATSCR_KRCEE 0x02 -#define W83C553F_ATSCR_KGA20EE 0x01 - -#define W83C553F_PIR_BM 0x80 -#define W83C553F_PIR_P1PROG 0x08 -#define W83C553F_PIR_P1NL 0x04 -#define W83C553F_PIR_P0PROG 0x02 -#define W83C553F_PIR_P0NL 0x01 - -/* - * Interrupt controller - */ -#define W83C553F_PIC1_ICW1 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ICW2 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW3 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_ICW4 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW1 CONFIG_ISA_IO + 0x21 -#define W83C553F_PIC1_OCW2 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_OCW3 CONFIG_ISA_IO + 0x20 -#define W83C553F_PIC1_ELC CONFIG_ISA_IO + 0x4D0 -#define W83C553F_PIC2_ICW1 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ICW2 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW3 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_ICW4 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW1 CONFIG_ISA_IO + 0xA1 -#define W83C553F_PIC2_OCW2 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_OCW3 CONFIG_ISA_IO + 0xA0 -#define W83C553F_PIC2_ELC CONFIG_ISA_IO + 0x4D1 - -#define W83C553F_TMR1_CMOD CONFIG_ISA_IO + 0x43 - -/* - * DMA controller - */ -#define W83C553F_DMA1 CONFIG_ISA_IO + 0x000 /* channel 0 - 3 */ -#define W83C553F_DMA2 CONFIG_ISA_IO + 0x0C0 /* channel 4 - 7 */ - -/* command/status register bit definitions */ - -#define W83C553F_CS_COM_DACKAL (1<<7) /* DACK# assert level */ -#define W83C553F_CS_COM_DREQSAL (1<<6) /* DREQ sense assert level */ -#define W83C553F_CS_COM_GAP (1<<4) /* group arbitration priority */ -#define W83C553F_CS_COM_CGE (1<<2) /* channel group enable */ - -#define W83C553F_CS_STAT_CH0REQ (1<<4) /* channel 0 (4) DREQ status */ -#define W83C553F_CS_STAT_CH1REQ (1<<5) /* channel 1 (5) DREQ status */ -#define W83C553F_CS_STAT_CH2REQ (1<<6) /* channel 2 (6) DREQ status */ -#define W83C553F_CS_STAT_CH3REQ (1<<7) /* channel 3 (7) DREQ status */ - -#define W83C553F_CS_STAT_CH0TC (1<<0) /* channel 0 (4) TC status */ -#define W83C553F_CS_STAT_CH1TC (1<<1) /* channel 1 (5) TC status */ -#define W83C553F_CS_STAT_CH2TC (1<<2) /* channel 2 (6) TC status */ -#define W83C553F_CS_STAT_CH3TC (1<<3) /* channel 3 (7) TC status */ - -/* mode register bit definitions */ - -#define W83C553F_MODE_TM_DEMAND (0<<6) /* transfer mode - demand */ -#define W83C553F_MODE_TM_SINGLE (1<<6) /* transfer mode - single */ -#define W83C553F_MODE_TM_BLOCK (2<<6) /* transfer mode - block */ -#define W83C553F_MODE_TM_CASCADE (3<<6) /* transfer mode - cascade */ -#define W83C553F_MODE_ADDRDEC (1<<5) /* address increment/decrement select */ -#define W83C553F_MODE_AUTOINIT (1<<4) /* autoinitialize enable */ -#define W83C553F_MODE_TT_VERIFY (0<<2) /* transfer type - verify */ -#define W83C553F_MODE_TT_WRITE (1<<2) /* transfer type - write */ -#define W83C553F_MODE_TT_READ (2<<2) /* transfer type - read */ -#define W83C553F_MODE_TT_ILLEGAL (3<<2) /* transfer type - illegal */ -#define W83C553F_MODE_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_MODE_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_MODE_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_MODE_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* request register bit definitions */ - -#define W83C553F_REQ_CHSERREQ (1<<2) /* channel service request */ -#define W83C553F_REQ_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_REQ_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_REQ_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_REQ_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* write single mask bit register bit definitions */ - -#define W83C553F_WSMB_CHMASKSEL (1<<2) /* channel mask select */ -#define W83C553F_WSMB_CH0SEL (0<<0) /* channel 0 (4) select */ -#define W83C553F_WSMB_CH1SEL (1<<0) /* channel 1 (5) select */ -#define W83C553F_WSMB_CH2SEL (2<<0) /* channel 2 (6) select */ -#define W83C553F_WSMB_CH3SEL (3<<0) /* channel 3 (7) select */ - -/* read/write all mask bits register bit definitions */ - -#define W83C553F_RWAMB_CH0MASK (1<<0) /* channel 0 (4) mask */ -#define W83C553F_RWAMB_CH1MASK (1<<1) /* channel 1 (5) mask */ -#define W83C553F_RWAMB_CH2MASK (1<<2) /* channel 2 (6) mask */ -#define W83C553F_RWAMB_CH3MASK (1<<3) /* channel 3 (7) mask */ - -/* typedefs */ - -#define W83C553F_DMA1_CS 0x8 -#define W83C553F_DMA1_WR 0x9 -#define W83C553F_DMA1_WSMB 0xA -#define W83C553F_DMA1_WM 0xB -#define W83C553F_DMA1_CBP 0xC -#define W83C553F_DMA1_MC 0xD -#define W83C553F_DMA1_CM 0xE -#define W83C553F_DMA1_RWAMB 0xF - -#define W83C553F_DMA2_CS 0xD0 -#define W83C553F_DMA2_WR 0xD2 -#define W83C553F_DMA2_WSMB 0xD4 -#define W83C553F_DMA2_WM 0xD6 -#define W83C553F_DMA2_CBP 0xD8 -#define W83C553F_DMA2_MC 0xDA -#define W83C553F_DMA2_CM 0xDC -#define W83C553F_DMA2_RWAMB 0xDE - -#endif /* _W83C553_H */ diff --git a/src/southbridge/winbond/w83c553/w83c553f_ide.c b/src/southbridge/winbond/w83c553/w83c553f_ide.c deleted file mode 100644 index d385cbfa26..0000000000 --- a/src/southbridge/winbond/w83c553/w83c553f_ide.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Andreas Heppel <aheppel@sysgo.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, - * MA 02110-1301 USA - */ - -/* - * Enable IDE controller of the W83C553F chip. - */ - -#include <console/console.h> -#include <device/device.h> -#include <device/pci.h> -#include <device/pci_ids.h> -#include <device/pci_ops.h> -#include "w83c553f.h" - -#ifndef CONFIG_IDE_MAXBUS -#define CONFIG_IDE_MAXBUS 2 -#endif -#ifndef CONFIG_IDE_MAXDEVICE -#define CONFIG_IDE_MAXDEVICE (CONFIG_IDE_MAXBUS*2) -#endif - -uint32_t ide_base[CONFIG_IDE_MAXBUS]; - -static void -w83c553_ide_init(struct device *dev) -{ - unsigned char reg8; - unsigned short reg16; - unsigned int reg32; - - printk_info("Configure W83C553F IDE (Function 1)\n"); - - /* - * Enable native mode on IDE ports and set base address. - */ - reg8 = W83C553F_PIR_P1NL | W83C553F_PIR_P0NL; - pci_write_config8(dev, W83C553F_PIR, reg8); - pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0xffffffff); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0x1f0); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0xffffffff); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_1); - pci_write_config32(dev, PCI_BASE_ADDRESS_1, 0x3f6); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_1); - pci_write_config32(dev, PCI_BASE_ADDRESS_2, 0xffffffff); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_2); - pci_write_config32(dev, PCI_BASE_ADDRESS_2, 0x170); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_2); - pci_write_config32(dev, PCI_BASE_ADDRESS_3, 0xffffffff); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_3); - pci_write_config32(dev, PCI_BASE_ADDRESS_3, 0x376); - reg32 = pci_read_config32(dev, PCI_BASE_ADDRESS_3); - - /* - * Set read-ahead duration to 0xff - * Enable P0 and P1 - */ - reg32 = 0x00ff0000 | W83C553F_IDECSR_P1EN | W83C553F_IDECSR_P0EN; - pci_write_config32(dev, W83C553F_IDECSR, reg32); - - ide_base[0] = pci_read_config32(dev, PCI_BASE_ADDRESS_0); - printk_debug("ide bus offset = 0x%x\n", ide_base[0]); - ide_base[0] &= ~1; -#if CONFIG_IDE_MAXBUS > 1 - ide_base[1] = pci_read_config32(dev, PCI_BASE_ADDRESS_2); - ide_base[1] &= ~1; -#endif - - /* - * Enable function 1, IDE -> busmastering and IO space access - */ - reg16 = pci_read_config16(dev, PCI_COMMAND); - reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_IO; - pci_write_config16(dev, PCI_COMMAND, reg16); - - printk_info("IDE configuration complete\n"); -} - -static struct device_operations w83c553_ide_ops = { - .read_resources = pci_dev_read_resources, - .set_resources = pci_dev_set_resources, - .enable_resources = pci_dev_enable_resources, - .init = w83c553_ide_init, - .scan_bus = 0, -}; - -static const struct pci_driver w83c553f_ide_pci_driver __pci_driver = { - /* w83c553f_ide */ - .ops = &w83c553_ide_ops, - .device = PCI_DEVICE_ID_WINBOND_82C105, - .vendor = PCI_VENDOR_ID_WINBOND, -}; diff --git a/util/compareboard/compareboard b/util/compareboard/compareboard index 06952fefd9..292e55f698 100755 --- a/util/compareboard/compareboard +++ b/util/compareboard/compareboard @@ -43,8 +43,6 @@ sed \ -e "/^CONFIG_ROMBASE / d" \ -e "/^CONFIG_ROM_IMAGE_SIZE / d" \ -e "/^CONFIG_STACK_SIZE / d" \ - -e "/^CONFIG_IDE_BOOT_DRIVE / d" \ - -e "/^CONFIG_IDE_OFFSET / d" \ -e "/^CONFIG_GDB_STUB / d" \ $A/old > $A/old.filtered sed \ |