summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMarshall Dawson <marshalldawson3rd@gmail.com>2019-05-29 09:24:18 -0600
committerMartin Roth <martinroth@google.com>2019-06-06 18:50:28 +0000
commit6ab5ed3b66fc215d0d03b19ab02fdcf8613c7d09 (patch)
tree0a1512a069659f4f16412cb21f5357daa047aa38
parenteceaa97b27b04a61dd5fb2e68e0f5ac1367a3c0f (diff)
downloadcoreboot-6ab5ed3b66fc215d0d03b19ab02fdcf8613c7d09.tar.xz
soc/amd/stoneyridge: Move LPC support to common
AMD devices traditionally have the LPC-ISA bus at 14.3 and the definition has been very consistent. Relocate the feature from stoneyridge into common/block. BUG=b:131682806 Change-Id: I8d7175b8642bb17533bb2287b3e3ee3d52e85a75 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32653 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-rw-r--r--src/mainboard/google/kahlee/bootblock/bootblock.c3
-rw-r--r--src/mainboard/google/kahlee/ec.c3
-rw-r--r--src/soc/amd/common/acpi/lpc.asl (renamed from src/soc/amd/stoneyridge/acpi/lpc.asl)0
-rw-r--r--src/soc/amd/common/block/include/amdblocks/lpc.h176
-rw-r--r--src/soc/amd/common/block/lpc/Kconfig5
-rw-r--r--src/soc/amd/common/block/lpc/Makefile.inc8
-rw-r--r--src/soc/amd/common/block/lpc/lpc.c (renamed from src/soc/amd/stoneyridge/lpc.c)18
-rw-r--r--src/soc/amd/common/block/lpc/lpc_util.c308
-rw-r--r--src/soc/amd/stoneyridge/Kconfig1
-rw-r--r--src/soc/amd/stoneyridge/Makefile.inc1
-rw-r--r--src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl2
-rw-r--r--src/soc/amd/stoneyridge/include/soc/southbridge.h155
-rw-r--r--src/soc/amd/stoneyridge/southbridge.c283
-rw-r--r--src/soc/amd/stoneyridge/spi.c7
14 files changed, 533 insertions, 437 deletions
diff --git a/src/mainboard/google/kahlee/bootblock/bootblock.c b/src/mainboard/google/kahlee/bootblock/bootblock.c
index 3be308e2d3..e403684a41 100644
--- a/src/mainboard/google/kahlee/bootblock/bootblock.c
+++ b/src/mainboard/google/kahlee/bootblock/bootblock.c
@@ -17,6 +17,7 @@
#include <bootblock_common.h>
#include <soc/gpio.h>
#include <soc/southbridge.h>
+#include <amdblocks/lpc.h>
#include <variant/ec.h>
#include <variant/gpio.h>
@@ -61,5 +62,5 @@ void bootblock_mainboard_init(void)
}
/* Setup TPM decode before verstage */
- sb_tpm_decode_spi();
+ lpc_tpm_decode_spi();
}
diff --git a/src/mainboard/google/kahlee/ec.c b/src/mainboard/google/kahlee/ec.c
index 7164591e11..1080902702 100644
--- a/src/mainboard/google/kahlee/ec.c
+++ b/src/mainboard/google/kahlee/ec.c
@@ -16,6 +16,7 @@
#include <arch/acpi.h>
#include <console/console.h>
#include <ec/google/chromeec/ec.h>
+#include <amdblocks/lpc.h>
#include <soc/southbridge.h>
#include <variant/ec.h>
@@ -49,7 +50,7 @@ static void early_ec_init(void)
printk(BIOS_DEBUG,
"LPC Setup google_chromeec_ioport_range: %04x, %08zx\n",
ec_ioport_base, ec_ioport_size);
- status = sb_set_wideio_range(ec_ioport_base, ec_ioport_size);
+ status = lpc_set_wideio_range(ec_ioport_base, ec_ioport_size);
if (status == WIDEIO_RANGE_ERROR)
printk(BIOS_WARNING, "ERROR: Failed to assign a range\n");
else
diff --git a/src/soc/amd/stoneyridge/acpi/lpc.asl b/src/soc/amd/common/acpi/lpc.asl
index 93b405619d..93b405619d 100644
--- a/src/soc/amd/stoneyridge/acpi/lpc.asl
+++ b/src/soc/amd/common/acpi/lpc.asl
diff --git a/src/soc/amd/common/block/include/amdblocks/lpc.h b/src/soc/amd/common/block/include/amdblocks/lpc.h
new file mode 100644
index 0000000000..7b33d7ad11
--- /dev/null
+++ b/src/soc/amd/common/block/include/amdblocks/lpc.h
@@ -0,0 +1,176 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __AMDBLOCKS_LPC_H__
+#define __AMDBLOCKS_LPC_H__
+
+#include <types.h>
+
+/* PCI registers for D14F3 */
+#define LPC_PCI_CONTROL 0x40
+#define LEGACY_DMA_EN BIT(2)
+
+#define LPC_IO_PORT_DECODE_ENABLE 0x44
+#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
+#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
+#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
+#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
+#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
+#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
+#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
+#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
+#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
+#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
+#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
+#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
+#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
+#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
+#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
+#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
+#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
+#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
+#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
+#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
+#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
+#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
+#define DECODE_ENABLE_MSS_PORT0 BIT(22)
+#define DECODE_ENABLE_MSS_PORT1 BIT(23)
+#define DECODE_ENABLE_MSS_PORT2 BIT(24)
+#define DECODE_ENABLE_MSS_PORT3 BIT(25)
+#define DECODE_ENABLE_FDC_PORT0 BIT(26)
+#define DECODE_ENABLE_FDC_PORT1 BIT(27)
+#define DECODE_ENABLE_GAME_PORT BIT(28)
+#define DECODE_ENABLE_KBC_PORT BIT(29)
+#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
+#define DECODE_ENABLE_ADLIB_PORT BIT(31)
+
+#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
+#define LPC_WIDEIO2_ENABLE BIT(25)
+#define LPC_WIDEIO1_ENABLE BIT(24)
+#define DECODE_IO_PORT_ENABLE6 BIT(23)
+#define DECODE_IO_PORT_ENABLE5 BIT(22)
+#define DECODE_IO_PORT_ENABLE4 BIT(21)
+#define DECODE_MEM_PORT_ENABLE1 BIT(20)
+#define DECODE_IO_PORT_ENABLE3 BIT(19)
+#define DECODE_IO_PORT_ENABLE2 BIT(18)
+#define DECODE_IO_PORT_ENABLE1 BIT(17)
+#define DECODE_IO_PORT_ENABLE0 BIT(16)
+#define LPC_SYNC_TIMEOUT_COUNT_ENABLE BIT(7)
+#define LPC_DECODE_RTC_IO_ENABLE BIT(6)
+#define DECODE_MEM_PORT_ENABLE0 BIT(5)
+#define LPC_WIDEIO0_ENABLE BIT(2)
+#define DECODE_ALTERNATE_SIO_ENABLE BIT(1)
+#define DECODE_SIO_ENABLE BIT(0)
+#define WIDEIO_RANGE_ERROR -1
+
+/* Assuming word access to higher word (register 0x4a) */
+#define LPC_IO_OR_MEM_DEC_EN_HIGH 0x4a
+#define LPC_WIDEIO2_ENABLE_H BIT(9)
+#define LPC_WIDEIO1_ENABLE_H BIT(8)
+#define DECODE_IO_PORT_ENABLE6_H BIT(7)
+#define DECODE_IO_PORT_ENABLE5_H BIT(6)
+#define DECODE_IO_PORT_ENABLE4_H BIT(5)
+#define DECODE_IO_PORT_ENABLE3_H BIT(3)
+#define DECODE_IO_PORT_ENABLE2_H BIT(2)
+#define DECODE_IO_PORT_ENABLE1_H BIT(1)
+#define DECODE_IO_PORT_ENABLE0_H BIT(0)
+
+#define LPC_MEM_PORT1 0x4c
+#define LPC_MEM_PORT0 0x60
+
+/* Register 0x64 is 32-bit, composed by two 16-bit sub-registers.
+ For ease of access, each sub-register is declared separetely. */
+#define LPC_WIDEIO_GENERIC_PORT 0x64
+#define LPC_WIDEIO1_GENERIC_PORT 0x66
+#define ROM_ADDRESS_RANGE1_START 0x68
+#define ROM_ADDRESS_RANGE1_END 0x6a
+#define ROM_ADDRESS_RANGE2_START 0x6c
+#define ROM_ADDRESS_RANGE2_END 0x6e
+
+#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
+#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
+#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
+#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
+
+#define LPC_MISC_CONTROL_BITS 0x78
+#define LPC_NOHOG BIT(0)
+
+#define LPC_TRUSTED_PLATFORM_MODULE 0x7c
+#define TPM_12_EN BIT(0)
+#define TPM_LEGACY_EN BIT(2)
+
+#define LPC_WIDEIO2_GENERIC_PORT 0x90
+
+#define SPIROM_BASE_ADDRESS_REGISTER 0xa0
+#define SPI_BASE_RESERVED (BIT(4) | BIT(5))
+#define ROUTE_TPM_2_SPI BIT(3)
+#define SPI_ABORT_ENABLE BIT(2)
+#define SPI_ROM_ENABLE BIT(1)
+#define SPI_ROM_ALT_ENABLE BIT(0)
+#define SPI_PRESERVE_BITS (BIT(0) | BIT(1) | BIT(2) | BIT(3))
+
+/* LPC register 0xb8 is DWORD, here there are definitions for byte
+ access. For example, bits 31-24 are accessed through byte access
+ at register 0xbb. */
+#define LPC_ROM_DMA_EC_HOST_CONTROL 0xb8
+#define SPI_FROM_HOST_PREFETCH_EN BIT(24)
+#define SPI_FROM_USB_PREFETCH_EN BIT(23)
+
+#define LPC_HOST_CONTROL 0xbb
+#define PREFETCH_EN_SPI_FROM_HOST BIT(0)
+#define T_START_ENH BIT(3)
+
+/* LPC is typically enabled very early, but this function is last opportunity */
+void soc_late_lpc_bridge_enable(void);
+void lpc_enable_port80(void);
+void lpc_enable_pci_port80(void);
+void lpc_enable_decode(uint32_t decodes);
+uintptr_t lpc_spibase(void);
+void lpc_tpm_decode(void);
+void lpc_tpm_decode_spi(void);
+void lpc_enable_rom(void);
+void lpc_enable_spi_prefetch(void);
+
+/**
+ * @brief Find the size of a particular wide IO
+ *
+ * @param index = index of desired wide IO
+ *
+ * @return size of desired wide IO
+ */
+uint16_t lpc_wideio_size(int index);
+/**
+ * @brief Identify if any LPC wide IO is covering the IO range
+ *
+ * @param start = start of IO range
+ * @param size = size of IO range
+ *
+ * @return Index of wide IO covering the range or error
+ */
+int lpc_find_wideio_range(uint16_t start, uint16_t size);
+/**
+ * @brief Program a LPC wide IO to support an IO range
+ *
+ * @param start = start of range to be routed through wide IO
+ * @param size = size of range to be routed through wide IO
+ *
+ * @return Index of wide IO register used or error
+ */
+int lpc_set_wideio_range(uint16_t start, uint16_t size);
+
+uintptr_t lpc_get_spibase(void);
+void lpc_set_spibase(uint32_t base, uint32_t enable);
+
+#endif /* __AMDBLOCKS_LPC_H__ */
diff --git a/src/soc/amd/common/block/lpc/Kconfig b/src/soc/amd/common/block/lpc/Kconfig
new file mode 100644
index 0000000000..b0d59a55f4
--- /dev/null
+++ b/src/soc/amd/common/block/lpc/Kconfig
@@ -0,0 +1,5 @@
+config SOC_AMD_COMMON_BLOCK_LPC
+ bool
+ default n
+ help
+ Select this option to use the traditional LPC-ISA bridge at D14F3.
diff --git a/src/soc/amd/common/block/lpc/Makefile.inc b/src/soc/amd/common/block/lpc/Makefile.inc
new file mode 100644
index 0000000000..72b1e42013
--- /dev/null
+++ b/src/soc/amd/common/block/lpc/Makefile.inc
@@ -0,0 +1,8 @@
+ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc.c
+
+bootblock-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
+verstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
+romstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
+postcar-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
+ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
+smm-$(CONFIG_SOC_AMD_COMMON_BLOCK_LPC) += lpc_util.c
diff --git a/src/soc/amd/stoneyridge/lpc.c b/src/soc/amd/common/block/lpc/lpc.c
index 1741e92e0c..b896517214 100644
--- a/src/soc/amd/stoneyridge/lpc.c
+++ b/src/soc/amd/common/block/lpc/lpc.c
@@ -28,15 +28,21 @@
#include <pc80/i8254.h>
#include <pc80/i8259.h>
#include <amdblocks/acpimmio.h>
+#include <amdblocks/lpc.h>
#include <soc/acpi.h>
-#include <soc/pci_devs.h>
#include <soc/southbridge.h>
#include <soc/nvs.h>
+#include <soc/iomap.h>
+
+/* Most systems should have already enabled the bridge */
+void __weak soc_late_lpc_bridge_enable(void) { }
static void lpc_init(struct device *dev)
{
u8 byte;
+ soc_late_lpc_bridge_enable();
+
/* Initialize isa dma */
isa_dma_init();
@@ -64,8 +70,8 @@ static void lpc_init(struct device *dev)
pci_write_config8(dev, LPC_MISC_CONTROL_BITS, byte);
/*
- * Enable hand-instance of the pulse generator and SPI
- * controller prefetch of flash.
+ * Enable hand-instance of the pulse generator and SPI prefetch from
+ * host (earlier is recommended for boot speed).
*/
byte = pci_read_config8(dev, LPC_HOST_CONTROL);
byte |= PREFETCH_EN_SPI_FROM_HOST | T_START_ENH;
@@ -247,9 +253,9 @@ static void set_child_resource(struct device *dev, struct device *child,
break;
default:
rsize = 0;
- wideio_index = sb_find_wideio_range(base, res->size);
+ wideio_index = lpc_find_wideio_range(base, res->size);
if (wideio_index != WIDEIO_RANGE_ERROR) {
- rsize = sb_wideio_size(wideio_index);
+ rsize = lpc_wideio_size(wideio_index);
printk(BIOS_DEBUG, "Covered by wideIO");
printk(BIOS_DEBUG, " %d\n", wideio_index);
}
@@ -260,7 +266,7 @@ static void set_child_resource(struct device *dev, struct device *child,
*reg_x |= set_x;
/* check if we can fit resource in variable range */
} else {
- wideio_index = sb_set_wideio_range(base, res->size);
+ wideio_index = lpc_set_wideio_range(base, res->size);
if (wideio_index != WIDEIO_RANGE_ERROR) {
/* preserve wide IO related bits. */
*reg_x = pci_read_config32(dev,
diff --git a/src/soc/amd/common/block/lpc/lpc_util.c b/src/soc/amd/common/block/lpc/lpc_util.c
new file mode 100644
index 0000000000..008d14c34e
--- /dev/null
+++ b/src/soc/amd/common/block/lpc/lpc_util.c
@@ -0,0 +1,308 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010-2017 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <stdint.h>
+#include <device/device.h>
+#include <device/pci_ops.h>
+#include <device/pci_def.h>
+#include <amdblocks/lpc.h>
+#include <soc/iomap.h>
+#include <soc/southbridge.h>
+
+/* The LPC-ISA bridge is always at D14F3 */
+#if !defined(__SIMPLE_DEVICE__)
+#include <device/device.h>
+#define _LPCB_DEV pcidev_on_root(0x14, 0x3)
+#else
+#define _LPCB_DEV PCI_DEV(0, 0x14, 0x3)
+#endif
+
+/*
+ * Structure to simplify code obtaining the total of used wide IO
+ * registers and the size assigned to each.
+ */
+static const struct wide_io_ioport_and_bits {
+ uint32_t enable;
+ uint16_t port;
+ uint8_t alt;
+} wio_io_en[] = {
+ {
+ .enable = LPC_WIDEIO0_ENABLE,
+ .port = LPC_WIDEIO_GENERIC_PORT,
+ .alt = LPC_ALT_WIDEIO0_ENABLE
+ },
+ {
+ .enable = LPC_WIDEIO1_ENABLE,
+ .port = LPC_WIDEIO1_GENERIC_PORT,
+ .alt = LPC_ALT_WIDEIO1_ENABLE
+ },
+ {
+ .enable = LPC_WIDEIO2_ENABLE,
+ .port = LPC_WIDEIO2_GENERIC_PORT,
+ .alt = LPC_ALT_WIDEIO2_ENABLE
+ }
+};
+
+/**
+ * @brief Find the size of a particular wide IO
+ *
+ * @param index = index of desired wide IO
+ *
+ * @return size of desired wide IO
+ */
+uint16_t lpc_wideio_size(int index)
+{
+ uint32_t enable_register;
+ uint16_t size = 0;
+ uint8_t alternate_register;
+
+ if (index >= ARRAY_SIZE(wio_io_en))
+ return size;
+ enable_register = pci_read_config32(_LPCB_DEV,
+ LPC_IO_OR_MEM_DECODE_ENABLE);
+ alternate_register = pci_read_config8(_LPCB_DEV,
+ LPC_ALT_WIDEIO_RANGE_ENABLE);
+ if (enable_register & wio_io_en[index].enable)
+ size = (alternate_register & wio_io_en[index].alt) ?
+ 16 : 512;
+ return size;
+}
+
+/**
+ * @brief Identify if any LPC wide IO is covering the IO range
+ *
+ * @param start = start of IO range
+ * @param size = size of IO range
+ *
+ * @return Index of wide IO covering the range or error
+ */
+int lpc_find_wideio_range(uint16_t start, uint16_t size)
+{
+ int i, index = WIDEIO_RANGE_ERROR;
+ uint16_t end, current_size, start_wideio, end_wideio;
+
+ end = start + size;
+ for (i = 0; i < ARRAY_SIZE(wio_io_en); i++) {
+ current_size = lpc_wideio_size(i);
+ if (current_size == 0)
+ continue;
+ start_wideio = pci_read_config16(_LPCB_DEV,
+ wio_io_en[i].port);
+ end_wideio = start_wideio + current_size;
+ if ((start >= start_wideio) && (end <= end_wideio)) {
+ index = i;
+ break;
+ }
+ }
+ return index;
+}
+
+/**
+ * @brief Program a LPC wide IO to support an IO range
+ *
+ * @param start = start of range to be routed through wide IO
+ * @param size = size of range to be routed through wide IO
+ *
+ * @return Index of wide IO register used or error
+ */
+int lpc_set_wideio_range(uint16_t start, uint16_t size)
+{
+ int i, index = WIDEIO_RANGE_ERROR;
+ uint32_t enable_register;
+ uint8_t alternate_register;
+
+ enable_register = pci_read_config32(_LPCB_DEV,
+ LPC_IO_OR_MEM_DECODE_ENABLE);
+ alternate_register = pci_read_config8(_LPCB_DEV,
+ LPC_ALT_WIDEIO_RANGE_ENABLE);
+ for (i = 0; i < ARRAY_SIZE(wio_io_en); i++) {
+ if (enable_register & wio_io_en[i].enable)
+ continue;
+ index = i;
+ pci_write_config16(_LPCB_DEV, wio_io_en[i].port, start);
+ enable_register |= wio_io_en[i].enable;
+ pci_write_config32(_LPCB_DEV, LPC_IO_OR_MEM_DECODE_ENABLE,
+ enable_register);
+ if (size <= 16)
+ alternate_register |= wio_io_en[i].alt;
+ else
+ alternate_register &= ~wio_io_en[i].alt;
+ pci_write_config8(_LPCB_DEV,
+ LPC_ALT_WIDEIO_RANGE_ENABLE,
+ alternate_register);
+ break;
+ }
+ return index;
+}
+
+void lpc_enable_port80(void)
+{
+ u8 byte;
+
+ byte = pci_read_config8(_LPCB_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
+ byte |= DECODE_IO_PORT_ENABLE4_H;
+ pci_write_config8(_LPCB_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
+}
+
+void lpc_enable_pci_port80(void)
+{
+ u8 byte;
+
+ byte = pci_read_config8(_LPCB_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
+ byte &= ~DECODE_IO_PORT_ENABLE4_H; /* disable lpc port 80 */
+ pci_write_config8(_LPCB_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
+}
+
+void lpc_enable_decode(uint32_t decodes)
+{
+ pci_write_config32(_LPCB_DEV, LPC_IO_PORT_DECODE_ENABLE, decodes);
+}
+
+uintptr_t lpc_spibase(void)
+{
+ u32 base, enables;
+
+ /* Make sure the base address is predictable */
+ base = pci_read_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER);
+ enables = base & SPI_PRESERVE_BITS;
+ base &= ~(SPI_PRESERVE_BITS | SPI_BASE_RESERVED);
+
+ if (!base) {
+ base = SPI_BASE_ADDRESS;
+ pci_write_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER,
+ base | enables | SPI_ROM_ENABLE);
+ /* PCI_COMMAND_MEMORY is read-only and enabled. */
+ }
+ return base;
+}
+
+/*
+ * Enable FCH to decode TPM associated Memory and IO regions
+ *
+ * Enable decoding of TPM cycles defined in TPM 1.2 spec
+ * Enable decoding of legacy TPM addresses: IO addresses 0x7f-
+ * 0x7e and 0xef-0xee.
+ * This function should be called if TPM is connected in any way to the FCH and
+ * conforms to the regions decoded.
+ * Absent any other routing configuration the TPM cycles will be claimed by the
+ * LPC bus
+ */
+void lpc_tpm_decode(void)
+{
+ u32 value;
+
+ value = pci_read_config32(_LPCB_DEV, LPC_TRUSTED_PLATFORM_MODULE);
+ value |= TPM_12_EN | TPM_LEGACY_EN;
+ pci_write_config32(_LPCB_DEV, LPC_TRUSTED_PLATFORM_MODULE, value);
+}
+
+/*
+ * Enable FCH to decode TPM associated Memory and IO regions to SPI
+ *
+ * This should be used if TPM is connected to SPI bus.
+ * Assumes SPI address space is already configured via a call to lpc_spibase().
+ */
+void lpc_tpm_decode_spi(void)
+{
+ /* Enable TPM decoding to FCH */
+ lpc_tpm_decode();
+
+ /* Route TPM accesses to SPI */
+ u32 spibase = pci_read_config32(_LPCB_DEV,
+ SPIROM_BASE_ADDRESS_REGISTER);
+ pci_write_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER, spibase
+ | ROUTE_TPM_2_SPI);
+}
+
+/*
+ * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
+ *
+ * Hardware should enable LPC ROM by pin straps. This function does not
+ * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
+ *
+ * The southbridge power-on default is to map 512K ROM space.
+ *
+ */
+void lpc_enable_rom(void)
+{
+ u8 reg8;
+
+ /*
+ * Decode variable LPC ROM address ranges 1 and 2.
+ * Bits 3-4 are not defined in any publicly available datasheet
+ */
+ reg8 = pci_read_config8(_LPCB_DEV, LPC_IO_OR_MEM_DECODE_ENABLE);
+ reg8 |= (1 << 3) | (1 << 4);
+ pci_write_config8(_LPCB_DEV, LPC_IO_OR_MEM_DECODE_ENABLE, reg8);
+
+ /*
+ * LPC ROM address range 1:
+ * Enable LPC ROM range mirroring start at 0x000e(0000).
+ */
+ pci_write_config16(_LPCB_DEV, ROM_ADDRESS_RANGE1_START, 0x000e);
+
+ /* Enable LPC ROM range mirroring end at 0x000f(ffff). */
+ pci_write_config16(_LPCB_DEV, ROM_ADDRESS_RANGE1_END, 0x000f);
+
+ /*
+ * LPC ROM address range 2:
+ *
+ * Enable LPC ROM range start at:
+ * 0xfff8(0000): 512KB
+ * 0xfff0(0000): 1MB
+ * 0xffe0(0000): 2MB
+ * 0xffc0(0000): 4MB
+ */
+ pci_write_config16(_LPCB_DEV, ROM_ADDRESS_RANGE2_START, 0x10000
+ - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
+
+ /* Enable LPC ROM range end at 0xffff(ffff). */
+ pci_write_config16(_LPCB_DEV, ROM_ADDRESS_RANGE2_END, 0xffff);
+}
+
+void lpc_enable_spi_prefetch(void)
+{
+ uint32_t dword;
+
+ dword = pci_read_config32(_LPCB_DEV, LPC_ROM_DMA_EC_HOST_CONTROL);
+ dword |= SPI_FROM_HOST_PREFETCH_EN | SPI_FROM_USB_PREFETCH_EN;
+ pci_write_config32(_LPCB_DEV, LPC_ROM_DMA_EC_HOST_CONTROL, dword);
+}
+
+uintptr_t lpc_get_spibase(void)
+{
+ u32 base;
+
+ base = pci_read_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER);
+ base = ALIGN_DOWN(base, SPI_BASE_ALIGNMENT);
+ return (uintptr_t)base;
+}
+
+void lpc_set_spibase(u32 base, u32 enable)
+{
+ u32 reg32;
+
+ /* only two types of CS# enables are allowed */
+ enable &= SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE;
+
+ reg32 = pci_read_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER);
+
+ reg32 &= SPI_BASE_ALIGNMENT - 1; /* preserve only reserved, enables */
+ reg32 &= ~(SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE);
+ reg32 |= enable;
+ reg32 |= ALIGN_DOWN(base, SPI_BASE_ALIGNMENT);
+
+ pci_write_config32(_LPCB_DEV, SPIROM_BASE_ADDRESS_REGISTER, reg32);
+}
diff --git a/src/soc/amd/stoneyridge/Kconfig b/src/soc/amd/stoneyridge/Kconfig
index 5333f5933a..ef7a7ae33f 100644
--- a/src/soc/amd/stoneyridge/Kconfig
+++ b/src/soc/amd/stoneyridge/Kconfig
@@ -48,6 +48,7 @@ config CPU_SPECIFIC_OPTIONS
select SOC_AMD_COMMON_BLOCK
select SOC_AMD_COMMON_BLOCK_ACPIMMIO
select SOC_AMD_COMMON_BLOCK_BANKED_GPIOS
+ select SOC_AMD_COMMON_BLOCK_LPC
select SOC_AMD_COMMON_BLOCK_PCI
select SOC_AMD_COMMON_BLOCK_PI
select SOC_AMD_COMMON_BLOCK_PSP
diff --git a/src/soc/amd/stoneyridge/Makefile.inc b/src/soc/amd/stoneyridge/Makefile.inc
index 68dba097c1..e235adaab2 100644
--- a/src/soc/amd/stoneyridge/Makefile.inc
+++ b/src/soc/amd/stoneyridge/Makefile.inc
@@ -104,7 +104,6 @@ ramstage-y += iommu.c
ramstage-y += monotonic_timer.c
ramstage-y += southbridge.c
ramstage-y += sb_util.c
-ramstage-y += lpc.c
ramstage-y += northbridge.c
ramstage-y += pmutil.c
ramstage-y += reset.c
diff --git a/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl b/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl
index 1334df11c4..3623814080 100644
--- a/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl
+++ b/src/soc/amd/stoneyridge/acpi/sb_pci0_fch.asl
@@ -51,7 +51,7 @@ Device(SBUS) {
/* 0:14.2 - I2S Audio */
/* 0:14.3 - LPC */
-#include "lpc.asl"
+#include <soc/amd/common/acpi/lpc.asl>
/* 0:14.7 - SD Controller */
Device(SDCN) {
diff --git a/src/soc/amd/stoneyridge/include/soc/southbridge.h b/src/soc/amd/stoneyridge/include/soc/southbridge.h
index 0ac43857e5..6a7c58f96a 100644
--- a/src/soc/amd/stoneyridge/include/soc/southbridge.h
+++ b/src/soc/amd/stoneyridge/include/soc/southbridge.h
@@ -256,125 +256,9 @@
#define GPE0_LIMIT 28
#define TOTAL_BITS(a) (8 * sizeof(a))
-/*
- * PCI Config Space Definitions
- */
-
-/* ISA Bridge D14F3 */
-#define LPC_PCI_CONTROL 0x40
-#define LEGACY_DMA_EN BIT(2)
-
-#define LPC_IO_PORT_DECODE_ENABLE 0x44
-#define DECODE_ENABLE_PARALLEL_PORT0 BIT(0)
-#define DECODE_ENABLE_PARALLEL_PORT1 BIT(1)
-#define DECODE_ENABLE_PARALLEL_PORT2 BIT(2)
-#define DECODE_ENABLE_PARALLEL_PORT3 BIT(3)
-#define DECODE_ENABLE_PARALLEL_PORT4 BIT(4)
-#define DECODE_ENABLE_PARALLEL_PORT5 BIT(5)
-#define DECODE_ENABLE_SERIAL_PORT0 BIT(6)
-#define DECODE_ENABLE_SERIAL_PORT1 BIT(7)
-#define DECODE_ENABLE_SERIAL_PORT2 BIT(8)
-#define DECODE_ENABLE_SERIAL_PORT3 BIT(9)
-#define DECODE_ENABLE_SERIAL_PORT4 BIT(10)
-#define DECODE_ENABLE_SERIAL_PORT5 BIT(11)
-#define DECODE_ENABLE_SERIAL_PORT6 BIT(12)
-#define DECODE_ENABLE_SERIAL_PORT7 BIT(13)
-#define DECODE_ENABLE_AUDIO_PORT0 BIT(14)
-#define DECODE_ENABLE_AUDIO_PORT1 BIT(15)
-#define DECODE_ENABLE_AUDIO_PORT2 BIT(16)
-#define DECODE_ENABLE_AUDIO_PORT3 BIT(17)
-#define DECODE_ENABLE_MIDI_PORT0 BIT(18)
-#define DECODE_ENABLE_MIDI_PORT1 BIT(19)
-#define DECODE_ENABLE_MIDI_PORT2 BIT(20)
-#define DECODE_ENABLE_MIDI_PORT3 BIT(21)
-#define DECODE_ENABLE_MSS_PORT0 BIT(22)
-#define DECODE_ENABLE_MSS_PORT1 BIT(23)
-#define DECODE_ENABLE_MSS_PORT2 BIT(24)
-#define DECODE_ENABLE_MSS_PORT3 BIT(25)
-#define DECODE_ENABLE_FDC_PORT0 BIT(26)
-#define DECODE_ENABLE_FDC_PORT1 BIT(27)
-#define DECODE_ENABLE_GAME_PORT BIT(28)
-#define DECODE_ENABLE_KBC_PORT BIT(29)
-#define DECODE_ENABLE_ACPIUC_PORT BIT(30)
-#define DECODE_ENABLE_ADLIB_PORT BIT(31)
-
-#define LPC_IO_OR_MEM_DECODE_ENABLE 0x48
-#define LPC_WIDEIO2_ENABLE BIT(25)
-#define LPC_WIDEIO1_ENABLE BIT(24)
-#define DECODE_IO_PORT_ENABLE6 BIT(23)
-#define DECODE_IO_PORT_ENABLE5 BIT(22)
-#define DECODE_IO_PORT_ENABLE4 BIT(21)
-#define DECODE_MEM_PORT_ENABLE1 BIT(20)
-#define DECODE_IO_PORT_ENABLE3 BIT(19)
-#define DECODE_IO_PORT_ENABLE2 BIT(18)
-#define DECODE_IO_PORT_ENABLE1 BIT(17)
-#define DECODE_IO_PORT_ENABLE0 BIT(16)
-#define LPC_SYNC_TIMEOUT_COUNT_ENABLE BIT(7)
-#define LPC_DECODE_RTC_IO_ENABLE BIT(6)
-#define DECODE_MEM_PORT_ENABLE0 BIT(5)
-#define LPC_WIDEIO0_ENABLE BIT(2)
-#define DECODE_ALTERNATE_SIO_ENABLE BIT(1)
-#define DECODE_SIO_ENABLE BIT(0)
-#define WIDEIO_RANGE_ERROR -1
-#define TOTAL_WIDEIO_PORTS 3
-
-/* Assuming word access to higher word (register 0x4a) */
-#define LPC_IO_OR_MEM_DEC_EN_HIGH 0x4a
-#define LPC_WIDEIO2_ENABLE_H BIT(9)
-#define LPC_WIDEIO1_ENABLE_H BIT(8)
-#define DECODE_IO_PORT_ENABLE6_H BIT(7)
-#define DECODE_IO_PORT_ENABLE5_H BIT(6)
-#define DECODE_IO_PORT_ENABLE4_H BIT(5)
-#define DECODE_IO_PORT_ENABLE3_H BIT(3)
-#define DECODE_IO_PORT_ENABLE2_H BIT(2)
-#define DECODE_IO_PORT_ENABLE1_H BIT(1)
-#define DECODE_IO_PORT_ENABLE0_H BIT(0)
-
-#define LPC_MEM_PORT1 0x4c
-#define LPC_MEM_PORT0 0x60
-
-/* Register 0x64 is 32-bit, composed by two 16-bit sub-registers.
- For ease of access, each sub-register is declared separetely. */
-#define LPC_WIDEIO_GENERIC_PORT 0x64
-#define LPC_WIDEIO1_GENERIC_PORT 0x66
-#define ROM_ADDRESS_RANGE1_START 0x68
-#define ROM_ADDRESS_RANGE1_END 0x6a
-#define ROM_ADDRESS_RANGE2_START 0x6c
-#define ROM_ADDRESS_RANGE2_END 0x6e
-
-#define LPC_ALT_WIDEIO_RANGE_ENABLE 0x74
-#define LPC_ALT_WIDEIO2_ENABLE BIT(3)
-#define LPC_ALT_WIDEIO1_ENABLE BIT(2)
-#define LPC_ALT_WIDEIO0_ENABLE BIT(0)
-
-#define LPC_MISC_CONTROL_BITS 0x78
-#define LPC_NOHOG BIT(0)
-
-#define LPC_TRUSTED_PLATFORM_MODULE 0x7c
-#define TPM_12_EN BIT(0)
-#define TPM_LEGACY_EN BIT(2)
-
-#define LPC_WIDEIO2_GENERIC_PORT 0x90
-
-#define SPIROM_BASE_ADDRESS_REGISTER 0xa0
-#define SPI_BASE_ALIGNMENT BIT(6)
-#define ROUTE_TPM_2_SPI BIT(3)
-#define SPI_ABORT_ENABLE BIT(2)
-#define SPI_ROM_ENABLE BIT(1)
-#define SPI_ROM_ALT_ENABLE BIT(0)
-
-/* LPC register 0xb8 is DWORD, here there are definitions for byte
- access. For example, bits 31-24 are accessed through byte access
- at register 0xbb. */
-#define LPC_ROM_DMA_EC_HOST_CONTROL 0xb8
-#define SPI_FROM_HOST_PREFETCH_EN BIT(24)
-#define SPI_FROM_USB_PREFETCH_EN BIT(23)
-
-#define LPC_HOST_CONTROL 0xbb
-#define PREFETCH_EN_SPI_FROM_HOST BIT(0)
-#define T_START_ENH BIT(3)
-
/* SPI Controller (base address in D14F3xA0) */
+#define SPI_BASE_ALIGNMENT BIT(6)
+
#define SPI_CNTRL0 0x00
#define SPI_BUSY BIT(31)
#define SPI_READ_MODE_MASK (BIT(30) | BIT(29) | BIT(18))
@@ -474,21 +358,13 @@ struct soc_power_reg {
#define XHCI_FW_BOOTRAM_SIZE 0x8000
void enable_aoac_devices(void);
-void sb_enable_rom(void);
void sb_clk_output_48Mhz(u32 osc);
void sb_disable_4dw_burst(void);
void sb_enable(struct device *dev);
void southbridge_final(void *chip_info);
void southbridge_init(void *chip_info);
-void sb_lpc_port80(void);
-void sb_lpc_decode(void);
-void sb_pci_port80(void);
void sb_read_mode(u32 mode);
void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm);
-void sb_tpm_decode(void);
-void sb_tpm_decode_spi(void);
-void lpc_wideio_512_window(uint16_t base);
-void lpc_wideio_16_window(uint16_t base);
uint16_t pm_acpi_pm_cnt_blk(void);
uint16_t pm_acpi_pm_evt_blk(void);
void bootblock_fch_early_init(void);
@@ -525,33 +401,6 @@ uint32_t get_uma_size(void);
* @return 64bit base address
*/
uint64_t get_uma_base(void);
-/**
- * @brief Find the size of a particular wide IO
- *
- * @param index = index of desired wide IO
- *
- * @return size of desired wide IO
- */
-uint16_t sb_wideio_size(int index);
-/**
- * @brief Identify if any LPC wide IO is covering the IO range
- *
- * @param start = start of IO range
- * @param size = size of IO range
- *
- * @return Index of wide IO covering the range or error
- */
-int sb_find_wideio_range(uint16_t start, uint16_t size);
-/**
- * @brief Program a LPC wide IO to support an IO range
- *
- * @param start = start of range to be routed through wide IO
- * @param size = size of range to be routed through wide IO
- *
- * @return Index of wide IO register used or error
- */
-int sb_set_wideio_range(uint16_t start, uint16_t size);
-
/*
* Call the mainboard to get the USB Over Current Map. The mainboard
* returns the map and 0 on Success or -1 on error or no map. There is
diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c
index b8d0595965..cd910319a5 100644
--- a/src/soc/amd/stoneyridge/southbridge.c
+++ b/src/soc/amd/stoneyridge/southbridge.c
@@ -27,6 +27,7 @@
#include <amdblocks/agesawrapper.h>
#include <amdblocks/reset.h>
#include <amdblocks/acpimmio.h>
+#include <amdblocks/lpc.h>
#include <soc/southbridge.h>
#include <soc/smbus.h>
#include <soc/smi.h>
@@ -152,130 +153,12 @@ const static struct irq_idx_name irq_association[] = {
{ PIRQ_UART1, "UART1" },
};
-/*
- * Structure to simplify code obtaining the total of used wide IO
- * registers and the size assigned to each.
- */
-static struct wide_io_ioport_and_bits {
- uint32_t enable;
- uint16_t port;
- uint8_t alt;
-} wio_io_en[TOTAL_WIDEIO_PORTS] = {
- {
- LPC_WIDEIO0_ENABLE,
- LPC_WIDEIO_GENERIC_PORT,
- LPC_ALT_WIDEIO0_ENABLE
- },
- {
- LPC_WIDEIO1_ENABLE,
- LPC_WIDEIO1_GENERIC_PORT,
- LPC_ALT_WIDEIO1_ENABLE
- },
- {
- LPC_WIDEIO2_ENABLE,
- LPC_WIDEIO2_GENERIC_PORT,
- LPC_ALT_WIDEIO2_ENABLE
- }
-};
-
const struct irq_idx_name *sb_get_apic_reg_association(size_t *size)
{
*size = ARRAY_SIZE(irq_association);
return irq_association;
}
-/**
- * @brief Find the size of a particular wide IO
- *
- * @param index = index of desired wide IO
- *
- * @return size of desired wide IO
- */
-uint16_t sb_wideio_size(int index)
-{
- uint32_t enable_register;
- uint16_t size = 0;
- uint8_t alternate_register;
-
- if (index >= TOTAL_WIDEIO_PORTS)
- return size;
- enable_register = pci_read_config32(SOC_LPC_DEV,
- LPC_IO_OR_MEM_DECODE_ENABLE);
- alternate_register = pci_read_config8(SOC_LPC_DEV,
- LPC_ALT_WIDEIO_RANGE_ENABLE);
- if (enable_register & wio_io_en[index].enable)
- size = (alternate_register & wio_io_en[index].alt) ?
- 16 : 512;
- return size;
-}
-
-/**
- * @brief Identify if any LPC wide IO is covering the IO range
- *
- * @param start = start of IO range
- * @param size = size of IO range
- *
- * @return Index of wide IO covering the range or error
- */
-int sb_find_wideio_range(uint16_t start, uint16_t size)
-{
- int i, index = WIDEIO_RANGE_ERROR;
- uint16_t end, current_size, start_wideio, end_wideio;
-
- end = start + size;
- for (i = 0; i < TOTAL_WIDEIO_PORTS; i++) {
- current_size = sb_wideio_size(i);
- if (current_size == 0)
- continue;
- start_wideio = pci_read_config16(SOC_LPC_DEV,
- wio_io_en[i].port);
- end_wideio = start_wideio + current_size;
- if ((start >= start_wideio) && (end <= end_wideio)) {
- index = i;
- break;
- }
- }
- return index;
-}
-
-/**
- * @brief Program a LPC wide IO to support an IO range
- *
- * @param start = start of range to be routed through wide IO
- * @param size = size of range to be routed through wide IO
- *
- * @return Index of wide IO register used or error
- */
-int sb_set_wideio_range(uint16_t start, uint16_t size)
-{
- int i, index = WIDEIO_RANGE_ERROR;
- uint32_t enable_register;
- uint8_t alternate_register;
-
- enable_register = pci_read_config32(SOC_LPC_DEV,
- LPC_IO_OR_MEM_DECODE_ENABLE);
- alternate_register = pci_read_config8(SOC_LPC_DEV,
- LPC_ALT_WIDEIO_RANGE_ENABLE);
- for (i = 0; i < TOTAL_WIDEIO_PORTS; i++) {
- if (enable_register & wio_io_en[i].enable)
- continue;
- index = i;
- pci_write_config16(SOC_LPC_DEV, wio_io_en[i].port, start);
- enable_register |= wio_io_en[i].enable;
- pci_write_config32(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE,
- enable_register);
- if (size <= 16)
- alternate_register |= wio_io_en[i].alt;
- else
- alternate_register &= ~wio_io_en[i].alt;
- pci_write_config8(SOC_LPC_DEV,
- LPC_ALT_WIDEIO_RANGE_ENABLE,
- alternate_register);
- break;
- }
- return index;
-}
-
static void power_on_aoac_device(int aoac_device_control_register)
{
uint8_t byte;
@@ -315,16 +198,7 @@ void enable_aoac_devices(void)
} while (!status);
}
-void sb_pci_port80(void)
-{
- u8 byte;
-
- byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
- byte &= ~DECODE_IO_PORT_ENABLE4_H; /* disable lpc port 80 */
- pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
-}
-
-void sb_lpc_port80(void)
+static void sb_enable_lpc(void)
{
u8 byte;
@@ -332,14 +206,9 @@ void sb_lpc_port80(void)
byte = pm_io_read8(PM_LPC_GATING);
byte |= PM_LPC_ENABLE;
pm_io_write8(PM_LPC_GATING, byte);
-
- /* Enable port 80 LPC decode in pci function 3 configuration space. */
- byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
- byte |= DECODE_IO_PORT_ENABLE4_H; /* enable port 80 */
- pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
}
-void sb_lpc_decode(void)
+static void sb_lpc_decode(void)
{
u32 tmp = 0;
@@ -357,7 +226,11 @@ void sb_lpc_decode(void)
| DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT
| DECODE_ENABLE_ADLIB_PORT;
- pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, tmp);
+ /* Decode SIOs at 2E/2F and 4E/4F */
+ if (CONFIG(STONEYRIDGE_LEGACY_FREE))
+ tmp |= DECODE_ALTERNATE_SIO_ENABLE | DECODE_SIO_ENABLE;
+
+ lpc_enable_decode(tmp);
}
static void sb_enable_cf9_io(void)
@@ -397,43 +270,17 @@ void sb_clk_output_48Mhz(u32 osc)
misc_write32(MISC_CLK_CNTL1, ctrl);
}
-static uintptr_t sb_get_spibase(void)
-{
- u32 base;
-
- base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
- base = ALIGN_DOWN(base, SPI_BASE_ALIGNMENT);
- return (uintptr_t)base;
-}
-
-static void sb_set_spibase(u32 base, u32 enable)
-{
- u32 reg32;
-
- /* only two types of CS# enables are allowed */
- enable &= SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE;
-
- reg32 = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
-
- reg32 &= SPI_BASE_ALIGNMENT - 1; /* preserve only reserved, enables */
- reg32 &= ~(SPI_ROM_ENABLE | SPI_ROM_ALT_ENABLE);
- reg32 |= enable;
- reg32 |= ALIGN_DOWN(base, SPI_BASE_ALIGNMENT);
-
- pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, reg32);
-}
-
static uintptr_t sb_init_spi_base(void)
{
uintptr_t base;
/* Make sure the base address is predictable */
- base = sb_get_spibase();
+ base = lpc_get_spibase();
if (base)
return base;
- sb_set_spibase(SPI_BASE_ADDRESS, SPI_ROM_ENABLE);
+ lpc_set_spibase(SPI_BASE_ADDRESS, SPI_ROM_ENABLE);
return SPI_BASE_ADDRESS;
}
@@ -464,109 +311,6 @@ void sb_read_mode(u32 mode)
& ~SPI_READ_MODE_MASK) | mode);
}
-/*
- * Enable FCH to decode TPM associated Memory and IO regions
- *
- * Enable decoding of TPM cycles defined in TPM 1.2 spec
- * Enable decoding of legacy TPM addresses: IO addresses 0x7f-
- * 0x7e and 0xef-0xee.
- * This function should be called if TPM is connected in any way to the FCH and
- * conforms to the regions decoded.
- * Absent any other routing configuration the TPM cycles will be claimed by the
- * LPC bus
- */
-void sb_tpm_decode(void)
-{
- u32 value;
-
- value = pci_read_config32(SOC_LPC_DEV, LPC_TRUSTED_PLATFORM_MODULE);
- value |= TPM_12_EN | TPM_LEGACY_EN;
- pci_write_config32(SOC_LPC_DEV, LPC_TRUSTED_PLATFORM_MODULE, value);
-}
-
-/*
- * Enable FCH to decode TPM associated Memory and IO regions to SPI
- *
- * This should be used if TPM is connected to SPI bus.
- * Assumes SPI address space is already configured.
- */
-void sb_tpm_decode_spi(void)
-{
- /* Enable TPM decoding to FCH */
- sb_tpm_decode();
-
- /* Route TPM accesses to SPI */
- u32 spibase = pci_read_config32(SOC_LPC_DEV,
- SPIROM_BASE_ADDRESS_REGISTER);
- pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, spibase
- | ROUTE_TPM_2_SPI);
-}
-
-/*
- * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
- *
- * Hardware should enable LPC ROM by pin straps. This function does not
- * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
- *
- * The southbridge power-on default is to map 512K ROM space.
- *
- */
-void sb_enable_rom(void)
-{
- u8 reg8;
-
- /*
- * Decode variable LPC ROM address ranges 1 and 2.
- * Bits 3-4 are not defined in any publicly available datasheet
- */
- reg8 = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE);
- reg8 |= (1 << 3) | (1 << 4);
- pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE, reg8);
-
- /*
- * LPC ROM address range 1:
- * Enable LPC ROM range mirroring start at 0x000e(0000).
- */
- pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_START, 0x000e);
-
- /* Enable LPC ROM range mirroring end at 0x000f(ffff). */
- pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_END, 0x000f);
-
- /*
- * LPC ROM address range 2:
- *
- * Enable LPC ROM range start at:
- * 0xfff8(0000): 512KB
- * 0xfff0(0000): 1MB
- * 0xffe0(0000): 2MB
- * 0xffc0(0000): 4MB
- */
- pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_START, 0x10000
- - (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
-
- /* Enable LPC ROM range end at 0xffff(ffff). */
- pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_END, 0xffff);
-}
-
-static void sb_lpc_early_setup(void)
-{
- uint32_t dword;
-
- /* Enable SPI prefetch */
- dword = pci_read_config32(SOC_LPC_DEV, LPC_ROM_DMA_EC_HOST_CONTROL);
- dword |= SPI_FROM_HOST_PREFETCH_EN | SPI_FROM_USB_PREFETCH_EN;
- pci_write_config32(SOC_LPC_DEV, LPC_ROM_DMA_EC_HOST_CONTROL, dword);
-
- if (CONFIG(STONEYRIDGE_LEGACY_FREE)) {
- /* Decode SIOs at 2E/2F and 4E/4F */
- dword = pci_read_config32(SOC_LPC_DEV,
- LPC_IO_OR_MEM_DECODE_ENABLE);
- dword |= DECODE_ALTERNATE_SIO_ENABLE | DECODE_SIO_ENABLE;
- pci_write_config32(SOC_LPC_DEV,
- LPC_IO_OR_MEM_DECODE_ENABLE, dword);
- }
-}
-
static void setup_spread_spectrum(int *reboot)
{
uint16_t rstcfg = pm_read16(PWR_RESET_CFG);
@@ -649,10 +393,11 @@ void bootblock_fch_early_init(void)
{
int reboot = 0;
- sb_enable_rom();
- sb_lpc_port80();
+ lpc_enable_rom();
+ sb_enable_lpc();
+ lpc_enable_port80();
sb_lpc_decode();
- sb_lpc_early_setup();
+ lpc_enable_spi_prefetch();
sb_init_spi_base();
sb_disable_4dw_burst(); /* Must be disabled on CZ(ST) */
enable_acpimmio_decode();
diff --git a/src/soc/amd/stoneyridge/spi.c b/src/soc/amd/stoneyridge/spi.c
index c682d980bb..8abfa160f4 100644
--- a/src/soc/amd/stoneyridge/spi.c
+++ b/src/soc/amd/stoneyridge/spi.c
@@ -26,6 +26,7 @@
#include <device/pci.h>
#include <device/pci_ops.h>
#include <soc/southbridge.h>
+#include <amdblocks/lpc.h>
#include <soc/pci_devs.h>
#define SPI_DEBUG_DRIVER CONFIG(DEBUG_SPI_FLASH)
@@ -103,11 +104,7 @@ static int execute_command(void)
void spi_init(void)
{
- uintptr_t bar;
-
- bar = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
- bar = ALIGN_DOWN(bar, 64);
- set_spibar(bar);
+ set_spibar(lpc_get_spibase());
}
static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,