summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLee Leahy <leroy.p.leahy@intel.com>2017-05-24 13:23:26 -0700
committerLee Leahy <leroy.p.leahy@intel.com>2017-06-20 18:11:07 +0200
commitd9351099ef5ca58a6153da1b782178bda22bc879 (patch)
tree9ba7393c6a9083d094f5d9c4fc80f61c1316d56e
parent0cae6e9e5d1be31daf80894dbf5f01880c786bbb (diff)
downloadcoreboot-d9351099ef5ca58a6153da1b782178bda22bc879.tar.xz
soc/intel/quark: Add legacy SPI flash controller driver
Add SPI driver code for the legacy SPI flash controller. Enable erase and write support allowing coreboot to save non-volatile data into the SPI flash. TEST=Build and run on Galileo Gen2. Change-Id: I8f38c955d7c42a1e58728c728d0cecc36556de5c Signed-off-by: Lee Leahy <Leroy.P.Leahy@intel.com> Reviewed-on: https://review.coreboot.org/20231 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
-rw-r--r--src/soc/intel/quark/Kconfig1
-rw-r--r--src/soc/intel/quark/Makefile.inc2
-rw-r--r--src/soc/intel/quark/include/soc/pci_devs.h1
-rw-r--r--src/soc/intel/quark/include/soc/spi.h96
-rw-r--r--src/soc/intel/quark/spi.c301
-rw-r--r--src/soc/intel/quark/spi_debug.c113
6 files changed, 514 insertions, 0 deletions
diff --git a/src/soc/intel/quark/Kconfig b/src/soc/intel/quark/Kconfig
index e392202736..bbb1927824 100644
--- a/src/soc/intel/quark/Kconfig
+++ b/src/soc/intel/quark/Kconfig
@@ -36,6 +36,7 @@ config CPU_SPECIFIC_OPTIONS
select SOC_INTEL_COMMON
select SOC_INTEL_COMMON_RESET
select SOC_SETS_MSRS
+ select SPI_FLASH
select TSC_CONSTANT_RATE
select UART_OVERRIDE_REFCLK
select UDELAY_TSC
diff --git a/src/soc/intel/quark/Makefile.inc b/src/soc/intel/quark/Makefile.inc
index d0a7a932e8..741f5d3068 100644
--- a/src/soc/intel/quark/Makefile.inc
+++ b/src/soc/intel/quark/Makefile.inc
@@ -58,6 +58,8 @@ ramstage-y += northcluster.c
ramstage-y += reg_access.c
ramstage-$(CONFIG_PLATFORM_USES_FSP2_0) += reset.c
ramstage-y += sd.c
+ramstage-y += spi.c
+ramstage-y += spi_debug.c
ramstage-$(CONFIG_STORAGE_TEST) += storage_test.c
ramstage-y += tsc_freq.c
ramstage-$(CONFIG_ENABLE_BUILTIN_HSUART1) += uart_common.c
diff --git a/src/soc/intel/quark/include/soc/pci_devs.h b/src/soc/intel/quark/include/soc/pci_devs.h
index a4e7a87fd2..1e17402868 100644
--- a/src/soc/intel/quark/include/soc/pci_devs.h
+++ b/src/soc/intel/quark/include/soc/pci_devs.h
@@ -28,6 +28,7 @@
#define I2CGPIO_DEVID 0x0934
#define HSUART_DEVID 0x0936
#define EHCI_DEVID 0x0939
+#define LPC_DEVID 0X095E
#define PCIE_PORT0_DEVID 0x11c3
#define PCIE_PORT1_DEVID 0x11c4
diff --git a/src/soc/intel/quark/include/soc/spi.h b/src/soc/intel/quark/include/soc/spi.h
new file mode 100644
index 0000000000..95c6b8944c
--- /dev/null
+++ b/src/soc/intel/quark/include/soc/spi.h
@@ -0,0 +1,96 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_SPI_H__
+#define __SOC_SPI_H__
+
+#include <spi_flash.h>
+#include <spi-generic.h>
+
+#define SPISTS 0x3020 /* Status register */
+#define SPICTL 0x3022 /* Control register */
+#define SPIADDR 0x3024 /* Flash chip select and 24-bit address */
+#define SPIDATA 0x3028 /* 64-byte send/receive data buffer */
+#define SPIBBAR 0x3070 /* BIOS base address */
+#define SPIPREOP 0x3074 /* Prefix opcode table */
+#define SPITYPE 0x3076 /* Opcode type table */
+#define SPIOPMENU 0x3078 /* Opcode table */
+#define SPIPBR0 0x3080 /* Protected BIOS range */
+#define SPIPBR1 0x3084
+#define SPIPBR2 0x3088
+
+struct flash_ctrlr {
+ uint8_t rsvd_0x00[0x3020];/* 0x00 */
+ uint16_t status; /* 0x3020: Status register */
+ uint16_t control; /* 0x3022: Control register */
+ uint32_t address; /* 0x3024: Chip select and 24-bit address */
+ uint8_t data[64]; /* 0x3028: 64-byte send/receive data buffer */
+ uint8_t rsvd_0x68[8]; /* 0x3068 */
+ uint32_t bbar; /* 0x3070: BIOS base address */
+ uint8_t prefix[2]; /* 0x3074: Prefix opcode table */
+ uint16_t type; /* 0x3076: Opcode type table */
+ uint8_t opmenu[8]; /* 0x3078: Opcode table */
+ uint32_t pbr[3]; /* 0x3080: Protected BIOS range */
+};
+
+/* 0x3020: SPISTS */
+#define SPISTS_CLD 0x8000 /* Lock SPI controller configuration */
+#define SPISTS_BA 0x0008 /* Access is blocked */
+#define SPISTS_CD 0x0004 /* Cycle done */
+#define SPISTS_CIP 0x0001 /* Cycle in progress */
+
+/* 0x3022: SPICTL */
+#define SPICTL_SMIEN 0x8000 /* Assert SMI_B at cycle done */
+#define SPICTL_DC 0x4000 /* Cycle contains data */
+#define SPICTL_DBCNT 0x3f00 /* Data byte count - 1, 1 - 64 bytes */
+#define SPICTL_DBCNT_SHIFT 8
+#define SPICTL_COPTR 0x0070 /* Opcode menu index, 0 - 7 */
+#define SPICTL_COPTR_SHIFT 4
+#define SPICTL_SOPTR 0x0008 /* Prefix index, 0 - 1 */
+#define SPICTL_SOPTR_SHIFT 3
+#define SPICTL_ACS 0x0004 /* Atomic cycle sequence */
+#define SPICTL_CG 0x0002 /* Cycle go */
+#define SPICTL_AR 0x0001 /* Access request */
+
+/* 0x3076: SPITYPE */
+#define SPITYPE_ADDRESS 0x0002 /* 3-byte address required */
+#define SPITYPE_PREFIX 0x0001 /* Prefix required, write/erase cycle */
+
+/*
+ * 0x3080: PBR0
+ * 0x3084: PBR1
+ * 0x3088: PBR2
+ */
+#define SPIPBR_WPE 0x80000000 /* Write protect enable */
+#define SPIPBR_PRL 0x00fff000 /* Protected range limit */
+#define SPIPBR_PRB_SHIFT 12
+#define SPIPBR_PRB 0x00000fff /* Protected range base */
+
+struct spi_context {
+ volatile struct flash_ctrlr *ctrlr;
+ uint16_t control;
+ uint16_t prefix;
+};
+
+extern const struct spi_ctrlr spi_driver;
+
+void spi_bios_base(uint32_t bios_base_address);
+void spi_controller_lock(void);
+void spi_display(volatile struct flash_ctrlr *ctrlr);
+const char *spi_opcode_name(int opcode);
+int spi_protection(uint32_t address, uint32_t length);
+
+#endif /* __SOC_SPI_H__ */
diff --git a/src/soc/intel/quark/spi.c b/src/soc/intel/quark/spi.c
new file mode 100644
index 0000000000..1d257a563e
--- /dev/null
+++ b/src/soc/intel/quark/spi.c
@@ -0,0 +1,301 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <assert.h>
+#include <bootstate.h>
+#include <console/console.h>
+#include <device/pci_ids.h>
+#include <device/pci_def.h>
+#include <delay.h>
+#include <soc/pci_devs.h>
+#include <soc/QuarkNcSocId.h>
+#include <soc/spi.h>
+
+struct spi_context spi_driver_context = {
+ NULL,
+ 0,
+ 0
+};
+
+void spi_bios_base(uint32_t bios_base_address)
+{
+ uint32_t address;
+ volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr;
+
+ /* Prevent all SPI operations below this address */
+ address = 0xff000000 | bios_base_address;
+ ctrlr->bbar = address;
+}
+
+void spi_controller_lock(void)
+{
+ volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr;
+
+ /* Prevent BIOS and system from changing the SPI controller setup */
+ ctrlr->status |= SPISTS_CLD;
+}
+
+int spi_protection(uint32_t address, uint32_t length)
+{
+ uint32_t base;
+ volatile struct flash_ctrlr *ctrlr = spi_driver_context.ctrlr;
+ int index;
+ uint32_t limit;
+ uint32_t protect;
+ uint32_t value;
+
+ /* Determine the protection range */
+ base = address;
+ limit = address + length - 1;
+ protect = SPIPBR_WPE | (limit & SPIPBR_PRL)
+ | ((base >> SPIPBR_PRB_SHIFT) & SPIPBR_PRB);
+
+ /* Walk the list of protected areas */
+ for (index = 0; index < ARRAY_SIZE(ctrlr->pbr); index++) {
+ value = read32(&ctrlr->pbr[index]);
+
+ /* Don't duplicate if the range is already protected */
+ if (value == protect)
+ return 0;
+
+ /* Use the first free register to protect this range */
+ if ((value & SPIPBR_WPE) == 0) {
+ write32(&ctrlr->pbr[index], protect);
+ return 0;
+ }
+ }
+
+ /* No free protection range registers */
+ printk(BIOS_ERR,
+ "Failed to set protection: 0x%08x - 0x%08x, PRRs full!\n",
+ address, address + length - 1);
+ return -1;
+}
+
+static int xfer(const struct spi_slave *slave, const void *dout,
+ size_t bytesout, void *din, size_t bytesin)
+{
+ struct spi_context *context;
+ uint16_t control;
+ volatile struct flash_ctrlr *ctrlr;
+ uint8_t *data;
+ int index;
+ uint8_t opcode;
+ uint32_t status;
+ int type;
+
+ /* Locate the context structure */
+ context = &spi_driver_context;
+ ctrlr = context->ctrlr;
+
+ /* Validate the buffer sizes */
+ if (bytesin > sizeof(ctrlr->data)) {
+ printk(BIOS_ERR, "bytesin > %ld\n", sizeof(ctrlr->data));
+ goto error;
+ }
+
+ if (bytesin && (din == NULL)) {
+ printk(BIOS_ERR, "din is NULL\n");
+ goto error;
+ }
+
+ if (bytesout == 0) {
+ /* Check for a read operation */
+ if (bytesin == 0) {
+ printk(BIOS_ERR, "bytesout and bytesin == 0\n");
+ goto error;
+ }
+
+ /* Issue the read operation */
+ control = context->control;
+ control |= SPICTL_DC | ((bytesin - 1) << SPICTL_DBCNT_SHIFT);
+ goto start_cycle;
+ }
+
+ /* Locate the opcode in the opcode table */
+ data = (uint8_t *)dout;
+ opcode = *data++;
+ bytesout -= 1;
+ for (index = 0; index < sizeof(ctrlr->opmenu); index++)
+ if (opcode == ctrlr->opmenu[index])
+ break;
+
+ /* Check for a prefix byte */
+ if (index == sizeof(ctrlr->opmenu)) {
+ for (index = 0; index < sizeof(ctrlr->prefix); index++)
+ if (opcode == ctrlr->prefix[index])
+ break;
+
+ /* Handle the unknown opcode error */
+ if (index == sizeof(ctrlr->prefix)) {
+ printk(BIOS_ERR, "Unknown SPI flash opcode\n");
+ goto error;
+ }
+
+ /* Save the index for the next operation */
+ context->prefix = index;
+ return 0;
+ }
+
+ /* Get the opcode type */
+ type = (ctrlr->type >> (index * 2))
+ & (SPITYPE_ADDRESS | SPITYPE_PREFIX);
+
+ /* Determine if the opcode has an address */
+ if (type & SPITYPE_ADDRESS) {
+ if (bytesout < 3) {
+ printk(BIOS_ERR, "Missing address bytes\n");
+ goto error;
+ }
+
+ /* Use chip select 0 */
+ ctrlr->address = (data[0] << 16)
+ | (data[1] << 8)
+ | data[2];
+ status = ctrlr->address;
+ data += 3;
+ bytesout -= 3;
+ }
+
+ /* Build the control value */
+ control = (index << SPICTL_COPTR_SHIFT)
+ | (context->prefix << SPICTL_SOPTR_SHIFT)
+ | SPICTL_CG | SPICTL_AR;
+ if (bytesout) {
+ memcpy((void *)&ctrlr->data[0], data, bytesout);
+ control |= SPICTL_DC | ((bytesout - 1) << SPICTL_DBCNT_SHIFT);
+ }
+
+ /* Save the control value for the read operation request */
+ if (!(type & SPITYPE_PREFIX)) {
+ context->control = control;
+ return 0;
+ }
+
+ /* Write operations require a prefix */
+ control |= SPICTL_ACS;
+
+start_cycle:
+ /* Start the SPI cycle */
+ ctrlr->control = control;
+ status = ctrlr->control;
+ context->prefix = 0;
+
+ /* Wait for the access to complete */
+ while ((status = ctrlr->status) & SPISTS_CIP)
+ udelay(1);
+
+ /* Clear any errors */
+ ctrlr->status = status;
+
+ /* Handle the blocked access error */
+ if (status & SPISTS_BA) {
+ printk(BIOS_ERR, "SPI access blocked!\n");
+ return -1;
+ }
+
+ /* Check for done */
+ if (status & SPISTS_CD) {
+ /* Return any receive data */
+ if (bytesin)
+ memcpy(din, (void *)&ctrlr->data[0], bytesin);
+ return 0;
+ }
+
+ /* Handle the timeout error */
+ printk(BIOS_ERR, "SPI transaction timeout!\n");
+
+error:
+ context->prefix = 0;
+ return -1;
+}
+
+void spi_init(void)
+{
+ uint32_t bios_control;
+ struct spi_context *context;
+ volatile struct flash_ctrlr *ctrlr;
+ device_t dev;
+ uint32_t rcba;
+
+ /* Determine the base address of the SPI flash controller */
+ context = &spi_driver_context;
+ dev = dev_find_device(PCI_VENDOR_ID_INTEL, LPC_DEVID, NULL);
+ rcba = pci_read_config32(dev, R_QNC_LPC_RCBA);
+ if (!(rcba & B_QNC_LPC_RCBA_EN)) {
+ printk(BIOS_ERR, "RBCA not enabled\n");
+ return;
+ }
+ rcba &= B_QNC_LPC_RCBA_MASK;
+ ctrlr = (volatile struct flash_ctrlr *)rcba;
+
+ /* Enable writes to the SPI flash */
+ bios_control = pci_read_config32(dev, R_QNC_LPC_BIOS_CNTL);
+ bios_control |= B_QNC_LPC_BIOS_CNTL_BIOSWE;
+ pci_write_config32(dev, R_QNC_LPC_BIOS_CNTL, bios_control);
+
+ /* Setup the SPI flash controller */
+ context->ctrlr = ctrlr;
+ ctrlr->opmenu[0] = 0x03; /* Read */
+ ctrlr->opmenu[1] = 0x0b; /* Read fast */
+ ctrlr->opmenu[2] = 0x05; /* Read status */
+ ctrlr->opmenu[3] = 0x9f; /* Read ID */
+ ctrlr->opmenu[4] = 0x02; /* Page program */
+ ctrlr->opmenu[5] = 0x20; /* Erase 4 KiB */
+ ctrlr->opmenu[6] = 0xd8; /* Erase 64 KiB */
+ ctrlr->opmenu[7] = 0x01; /* Write status */
+ ctrlr->prefix[0] = 0x50; /* Write status enable */
+ ctrlr->prefix[1] = 0x06; /* Write enable */
+ ctrlr->type = SPITYPE_ADDRESS /* Read */
+ | (SPITYPE_ADDRESS << 2) /* Read fast */
+ | (0 << 4) /* Read status */
+ | (0 << 6) /* Read ID */
+ | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 8) /* Page program */
+ | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 10) /* Erase 4 KiB */
+ | ((SPITYPE_ADDRESS | SPITYPE_PREFIX) << 12) /* Erase 64 KiB */
+ | (SPITYPE_PREFIX << 14); /* Write status */
+}
+
+static void spi_init_cb(void *unused)
+{
+ struct spi_flash flash;
+
+ spi_init();
+ if (spi_flash_probe(0, 0, &flash)) {
+ printk(BIOS_DEBUG, "SPI flash failed initialization!\n");
+ return;
+ }
+ printk(BIOS_DEBUG, "SPI flash successfully initialized\n");
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_INIT, BS_ON_ENTRY, spi_init_cb, NULL);
+
+const struct spi_ctrlr spi_driver = {
+ .xfer = xfer,
+ .max_xfer_size = 64,
+ .deduct_cmd_len = false,
+};
+
+const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
+ {
+ .ctrlr = &spi_driver,
+ .bus_start = 0,
+ .bus_end = 0,
+ },
+};
+
+const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
diff --git a/src/soc/intel/quark/spi_debug.c b/src/soc/intel/quark/spi_debug.c
new file mode 100644
index 0000000000..d229f2e504
--- /dev/null
+++ b/src/soc/intel/quark/spi_debug.c
@@ -0,0 +1,113 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <soc/spi.h>
+
+const char *spi_opcode_name(int opcode)
+{
+ const char *op_name;
+
+ switch (opcode) {
+ default:
+ op_name = "Unknown";
+ break;
+ case 1:
+ op_name = "Write Status";
+ break;
+ case 2:
+ op_name = "Page Program";
+ break;
+ case 3:
+ op_name = "Read Data";
+ break;
+ case 5:
+ op_name = "Read Status";
+ break;
+ case 6:
+ op_name = "Write Data Enable";
+ break;
+ case 0x0b:
+ op_name = "Fast Read";
+ break;
+ case 0x20:
+ op_name = "Erase 4 KiB";
+ break;
+ case 0x50:
+ op_name = "Write Status Enable";
+ break;
+ case 0x9f:
+ op_name = "Read ID";
+ break;
+ case 0xd8:
+ op_name = "Erase 64 KiB";
+ break;
+ }
+ return op_name;
+}
+
+void spi_display(volatile struct flash_ctrlr *ctrlr)
+{
+ int index;
+ int opcode;
+ const char *op_name;
+ int prefix;
+ int status;
+ int type;
+
+ /* Display the prefixes */
+ printk(BIOS_DEBUG, "Prefix Table\n");
+ for (index = 0; index < 2; index++) {
+ prefix = ctrlr->prefix[index];
+ op_name = spi_opcode_name(prefix);
+ printk(BIOS_DEBUG, " %d: 0x%02x (%s)\n", index, prefix,
+ op_name);
+ }
+
+ /* Display the opcodes */
+ printk(BIOS_DEBUG, "Opcode Menu\n");
+ for (index = 0; index < 8; index++) {
+ opcode = ctrlr->opmenu[index];
+ type = (ctrlr->type >> (index << 1)) & 3;
+ op_name = spi_opcode_name(opcode);
+ printk(BIOS_DEBUG, " %d: 0x%02x (%s), %s%s\n", index, opcode,
+ op_name,
+ (type & SPITYPE_PREFIX) ? "Write" : "Read",
+ (type & SPITYPE_ADDRESS) ? ", w/3 byte address" : "");
+ }
+
+ /* Display the BIOS base address */
+ printk(BIOS_DEBUG, "0x%08x: BIOS Base Address\n", ctrlr->bbar);
+
+ /* Display the protection ranges */
+ printk(BIOS_DEBUG, "BIOS Protected Range Regsiters\n");
+ for (index = 0; index < ARRAY_SIZE(ctrlr->pbr); index++) {
+ status = ctrlr->pbr[index];
+ printk(BIOS_DEBUG, " %d: 0x%08x: 0x%08x - 0x%08x %s\n",
+ index, status,
+ 0xff000000 | (0x1000000 - CONFIG_ROM_SIZE)
+ | ((status & SPIPBR_PRB) << SPIPBR_PRB_SHIFT),
+ 0xff800fff | (0x1000000 - CONFIG_ROM_SIZE)
+ | (status & SPIPBR_PRL),
+ (status & SPIPBR_WPE) ? "Protected" : "Unprotected");
+ }
+
+ /* Display locked status */
+ status = ctrlr->status;
+ printk(BIOS_DEBUG, "0x%04x: SPISTS, Tables %s\n", status,
+ (status & SPISTS_CLD) ? "Locked" : "Unlocked");
+}