summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2008-09-23 20:36:03 +0000
committerRudolf Marek <r.marek@assembler.cz>2008-09-23 20:36:03 +0000
commit05839975bf2549d5fb3bed460745e24ffd7b832a (patch)
treedc9395aee0c462ed364dd5e6a25d89faa90e981c
parent80d7c85fb9e9f0b301b01e68f475b2ede34ec877 (diff)
downloadcoreboot-05839975bf2549d5fb3bed460745e24ffd7b832a.tar.xz
Following patch adds support for Asus M2V-E SE. Works pretty well, the only
problem left is with CPU scaling setup. No VGA - may work with the Xorg drivers recently released, maybe with OpenChrome too. It wont work with the little patch which will hop in soon Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Ward Vandewege <ward@gnu.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3591 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/asus/m2v-mx_se/Config.lb196
-rw-r--r--src/mainboard/asus/m2v-mx_se/Options.lb168
-rw-r--r--src/mainboard/asus/m2v-mx_se/acpi_tables.c163
-rw-r--r--src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c294
-rw-r--r--src/mainboard/asus/m2v-mx_se/chip.h23
-rw-r--r--src/mainboard/asus/m2v-mx_se/cmos.layout98
-rw-r--r--src/mainboard/asus/m2v-mx_se/dsdt.asl191
-rw-r--r--src/mainboard/asus/m2v-mx_se/fadt.c153
-rw-r--r--src/mainboard/asus/m2v-mx_se/mainboard.c30
-rw-r--r--src/mainboard/asus/m2v-mx_se/mptable.c32
-rw-r--r--targets/asus/m2v-mx_se/Config.lb38
11 files changed, 1386 insertions, 0 deletions
diff --git a/src/mainboard/asus/m2v-mx_se/Config.lb b/src/mainboard/asus/m2v-mx_se/Config.lb
new file mode 100644
index 0000000000..7d9e430f02
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/Config.lb
@@ -0,0 +1,196 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 AMD
+## (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+if USE_FALLBACK_IMAGE
+ default ROM_SECTION_SIZE = FALLBACK_SIZE
+ default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
+else
+ default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
+ default ROM_SECTION_OFFSET = 0
+end
+
+default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
+default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
+default CONFIG_ROM_PAYLOAD = 1
+default _ROMBASE = (CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE)
+
+##WARNING enable caching of whole ROM during CAR
+default XIP_ROM_SIZE = ROM_SIZE
+default XIP_ROM_BASE = 0xffffffff + 1 - XIP_ROM_SIZE
+
+arch i386 end
+
+driver mainboard.o
+if HAVE_ACPI_TABLES
+ object acpi_tables.o
+ object fadt.o
+ makerule dsdt.c
+ depends "$(MAINBOARD)/dsdt.asl"
+ action "iasl -p $(PWD)/dsdt -tc $(MAINBOARD)/dsdt.asl"
+ action "mv dsdt.hex dsdt.c"
+ end
+ object ./dsdt.o
+end
+if HAVE_MP_TABLE object mptable.o end
+if HAVE_PIRQ_TABLE object irq_tables.o end
+# object reset.o
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ makerule ./cache_as_ram_auto.o
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o $@"
+ end
+ else
+ makerule ./cache_as_ram_auto.inc
+ depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
+ action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
+ action "perl -e 's/.rodata/.rom.data/g' -pi $@"
+ action "perl -e 's/.text/.section .rom.text/g' -pi $@"
+ end
+ end
+end
+
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/entry16.inc
+ ldscript /cpu/x86/16bit/entry16.lds
+ mainboardinit southbridge/via/k8t890/romstrap.inc
+ ldscript /southbridge/via/k8t890/romstrap.lds
+end
+
+mainboardinit cpu/x86/32bit/entry32.inc
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ ldscript /cpu/x86/32bit/entry32.lds
+ end
+ if CONFIG_USE_INIT
+ ldscript /cpu/amd/car/cache_as_ram.lds
+ end
+end
+
+if USE_FALLBACK_IMAGE
+ mainboardinit cpu/x86/16bit/reset16.inc
+ ldscript /cpu/x86/16bit/reset16.lds
+else
+ mainboardinit cpu/x86/32bit/reset32.inc
+ ldscript /cpu/x86/32bit/reset32.lds
+end
+
+if USE_DCACHE_RAM
+ mainboardinit cpu/amd/car/cache_as_ram.inc
+end
+
+if USE_FALLBACK_IMAGE
+ if USE_DCACHE_RAM
+ ldscript /arch/i386/lib/failover.lds
+ end
+end
+
+if USE_DCACHE_RAM
+ if CONFIG_USE_INIT
+ initobject cache_as_ram_auto.o
+ else
+ mainboardinit ./cache_as_ram_auto.inc
+ end
+end
+
+if CONFIG_CHIP_NAME
+ config chip.h
+end
+
+chip northbridge/amd/amdk8/root_complex # Root complex
+ device apic_cluster 0 on # APIC cluster
+ chip cpu/amd/socket_AM2 # CPU
+ device apic 0 on end # APIC
+ end
+ end
+ device pci_domain 0 on # PCI domain
+ chip northbridge/amd/amdk8 # mc0
+ device pci 18.0 on # Northbridge
+ # Devices on link 0, link 0 == LDT 0
+ chip southbridge/via/vt8237r # Southbridge
+ register "ide0_enable" = "1" # Enable IDE channel 0
+ register "ide1_enable" = "1" # Enable IDE channel 1
+ register "ide0_80pin_cable" = "1" # 80pin cable on IDE channel 0
+ register "ide1_80pin_cable" = "1" # 80pin cable on IDE channel 1
+ register "fn_ctrl_lo" = "0xc0" # Enable SB functions
+ register "fn_ctrl_hi" = "0x1d" # Enable SB functions
+ device pci 0.0 on end # HT
+ device pci f.1 on end # IDE
+ device pci 11.0 on # LPC
+ chip drivers/generic/generic # DIMM 0-0-0
+ device i2c 50 on end
+ end
+ chip drivers/generic/generic # DIMM 0-0-1
+ device i2c 51 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-0
+ device i2c 52 on end
+ end
+ chip drivers/generic/generic # DIMM 0-1-1
+ device i2c 53 on end
+ end
+ chip superio/ite/it8712f # Super I/O
+ device pnp 2e.0 on # Floppy
+ io 0x60 = 0x3f0
+ irq 0x70 = 6
+ drq 0x74 = 2
+ end
+ device pnp 2e.1 on # Com1
+ io 0x60 = 0x3f8
+ irq 0x70 = 4
+ end
+ device pnp 2e.2 off # Com2
+ io 0x60 = 0x2f8
+ irq 0x70 = 3
+ end
+ device pnp 2e.3 on # Parallel port
+ io 0x60 = 0x378
+ irq 0x70 = 7
+ end
+ device pnp 2e.4 on # Environment controller
+ io 0x60 = 0x290
+ io 0x62 = 0x230
+ irq 0x70 = 0x00
+ end
+ device pnp 2e.5 off end # PS/2 keyboard
+ device pnp 2e.6 off end # PS/2 mouse
+ device pnp 2e.7 off end # GPIO config
+ device pnp 2e.8 off end # Midi port
+ device pnp 2e.9 off end # Game port
+ device pnp 2e.a off end # IR
+ end
+ end
+ device pci 12.0 on end # VIA LAN
+ device pci 13.0 on end # br
+ device pci 13.1 on end # br2 need to have it here to discover it
+ end
+ chip southbridge/via/k8t890 # "Southbridge" K8M890
+ end
+ end
+ device pci 18.1 on end
+ device pci 18.2 on end
+ device pci 18.3 on end
+ end
+ end
+end
diff --git a/src/mainboard/asus/m2v-mx_se/Options.lb b/src/mainboard/asus/m2v-mx_se/Options.lb
new file mode 100644
index 0000000000..9b47ffc06c
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/Options.lb
@@ -0,0 +1,168 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License v2 as published by
+## the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+uses HAVE_MP_TABLE
+uses HAVE_PIRQ_TABLE
+uses USE_FALLBACK_IMAGE
+uses HAVE_FALLBACK_BOOT
+uses HAVE_HARD_RESET
+uses IRQ_SLOT_COUNT
+uses HAVE_OPTION_TABLE
+uses CONFIG_MAX_CPUS
+uses CONFIG_MAX_PHYSICAL_CPUS
+uses CONFIG_LOGICAL_CPUS
+uses CONFIG_IOAPIC
+uses CONFIG_SMP
+uses FALLBACK_SIZE
+uses ROM_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_IMAGE_SIZE
+uses ROM_SECTION_SIZE
+uses ROM_SECTION_OFFSET
+uses CONFIG_ROM_PAYLOAD
+uses CONFIG_ROM_PAYLOAD_START
+uses PAYLOAD_SIZE
+uses _ROMBASE
+uses XIP_ROM_SIZE
+uses XIP_ROM_BASE
+uses STACK_SIZE
+uses HEAP_SIZE
+# uses USE_OPTION_TABLE
+# uses CONFIG_LB_MEM_TOPK
+uses HAVE_ACPI_TABLES
+uses LB_CKS_RANGE_START
+uses LB_CKS_RANGE_END
+uses LB_CKS_LOC
+uses MAINBOARD
+uses MAINBOARD_PART_NUMBER
+uses MAINBOARD_VENDOR
+uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
+uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
+uses COREBOOT_EXTRA_VERSION
+uses _RAMBASE
+uses CONFIG_GDB_STUB
+uses CROSS_COMPILE
+uses CC
+uses HOSTCC
+uses OBJCOPY
+uses TTYS0_BAUD
+uses TTYS0_BASE
+uses TTYS0_LCS
+uses DEFAULT_CONSOLE_LOGLEVEL
+uses MAXIMUM_CONSOLE_LOGLEVEL
+uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
+uses CONFIG_CONSOLE_SERIAL8250
+uses HAVE_INIT_TIMER
+uses CONFIG_GDB_STUB
+uses CONFIG_CHIP_NAME
+uses CONFIG_CONSOLE_VGA
+uses CONFIG_PCI_ROM_RUN
+# bx_b001- uses K8_HW_MEM_HOLE_SIZEK
+uses K8_HT_FREQ_1G_SUPPORT
+uses USE_DCACHE_RAM
+uses DCACHE_RAM_BASE
+uses DCACHE_RAM_SIZE
+uses DCACHE_RAM_GLOBAL_VAR_SIZE
+uses CONFIG_USE_INIT
+uses ENABLE_APIC_EXT_ID
+uses APIC_ID_OFFSET
+uses LIFT_BSP_APIC_ID
+uses HT_CHAIN_UNITID_BASE
+uses HT_CHAIN_END_UNITID_BASE
+# bx_b001- uses K8_SB_HT_CHAIN_ON_BUS0
+uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
+# bx_b005+
+uses SB_HT_CHAIN_ON_BUS0
+uses CONFIG_COMPRESSED_PAYLOAD_NRV2B
+uses CONFIG_COMPRESSED_PAYLOAD_LZMA
+
+default ROM_SIZE = 512 * 1024
+default FALLBACK_SIZE = 256 * 1024
+default HAVE_FALLBACK_BOOT = 1
+default HAVE_HARD_RESET = 0
+default HAVE_PIRQ_TABLE = 0
+default IRQ_SLOT_COUNT = 11 # FIXME?
+default HAVE_MP_TABLE = 1
+default HAVE_OPTION_TABLE = 0 # FIXME
+# Move the default coreboot CMOS range off of AMD RTC registers.
+default LB_CKS_RANGE_START = 49
+default LB_CKS_RANGE_END = 122
+default LB_CKS_LOC = 123
+default CONFIG_SMP = 1
+default CONFIG_MAX_CPUS = 2
+default CONFIG_MAX_PHYSICAL_CPUS = 1
+default CONFIG_LOGICAL_CPUS = 1
+default HAVE_ACPI_TABLES = 1
+# default CONFIG_CHIP_NAME = 1
+
+# 1G memory hole
+# bx_b001- default K8_HW_MEM_HOLE_SIZEK = 0x100000
+
+# Opteron K8 1G HT support
+default K8_HT_FREQ_1G_SUPPORT = 1
+
+# HT Unit ID offset, default is 1, the typical one.
+default HT_CHAIN_UNITID_BASE = 0x0
+
+# Real SB Unit ID, default is 0x20, mean don't touch it at last.
+# default HT_CHAIN_END_UNITID_BASE = 0x0
+
+# Make the SB HT chain on bus 0, default is not (0).
+# bx_b001- default K8_SB_HT_CHAIN_ON_BUS0 = 2
+
+# bx_b005+ make the SB HT chain on bus 0.
+default SB_HT_CHAIN_ON_BUS0 = 1
+
+# Only offset for SB chain?, default is yes(1).
+default SB_HT_CHAIN_UNITID_OFFSET_ONLY = 0
+
+default CONFIG_CONSOLE_VGA = 1 # Needed for VGA.
+default CONFIG_PCI_ROM_RUN = 0 # Needed for VGA.
+default USE_DCACHE_RAM = 1
+default DCACHE_RAM_BASE = 0xcc000
+default DCACHE_RAM_SIZE = 0x4000
+default DCACHE_RAM_GLOBAL_VAR_SIZE = 0x01000
+default CONFIG_USE_INIT = 0
+default ENABLE_APIC_EXT_ID = 0
+default APIC_ID_OFFSET = 0x10
+default LIFT_BSP_APIC_ID = 0
+default CONFIG_IOAPIC = 1
+default MAINBOARD_VENDOR = "ASUS"
+default MAINBOARD_PART_NUMBER = "M2V-MX SE"
+default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID = 0x1043
+# default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID = 0x1234 # FIXME
+default ROM_IMAGE_SIZE = 64 * 1024
+default STACK_SIZE = 8 * 1024
+default HEAP_SIZE = 256 * 1024
+# More 1M for pgtbl.
+# default CONFIG_LB_MEM_TOPK = 2048
+default _RAMBASE = 0x00004000
+# default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
+default CONFIG_ROM_PAYLOAD = 1
+default CC = "$(CROSS_COMPILE)gcc -m32"
+default HOSTCC = "gcc"
+default CONFIG_GDB_STUB = 0
+default CONFIG_CONSOLE_SERIAL8250 = 1
+default TTYS0_BAUD = 115200
+default TTYS0_BASE = 0x3f8
+default TTYS0_LCS = 0x3 # 8n1
+default DEFAULT_CONSOLE_LOGLEVEL = 9
+default MAXIMUM_CONSOLE_LOGLEVEL = 9
+default MAINBOARD_POWER_ON_AFTER_POWER_FAIL = "MAINBOARD_POWER_ON"
+end
diff --git a/src/mainboard/asus/m2v-mx_se/acpi_tables.c b/src/mainboard/asus/m2v-mx_se/acpi_tables.c
new file mode 100644
index 0000000000..86fee0c99a
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/acpi_tables.c
@@ -0,0 +1,163 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Written by Stefan Reinauer <stepan@openbios.org>.
+ * ACPI FADT, FACS, and DSDT table support added by
+ *
+ * Copyright (C) 2004 Stefan Reinauer <stepan@openbios.org>
+ * Copyright (C) 2005 Nick Barker <nick.barker9@btinternet.com>
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <string.h>
+#include <arch/acpi.h>
+#include <arch/smp/mpspec.h>
+#include <device/device.h>
+#include <device/pci_ids.h>
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+#include <../../../southbridge/via/k8t890/k8t890.h>
+
+extern unsigned char AmlCode[];
+
+unsigned long acpi_fill_mcfg(unsigned long current)
+{
+ device_t dev;
+ struct resource *res;
+
+ dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_K8T890CE_5, 0);
+ if (!dev)
+ return current;
+
+ res = find_resource(dev, K8T890_MMCONFIG_MBAR);
+ if (res) {
+ current += acpi_create_mcfg_mmconfig((acpi_mcfg_mmconfig_t *)
+ current, res->base, 0x0, 0x0, 0xff);
+ }
+ return current;
+}
+
+unsigned long acpi_fill_madt(unsigned long current)
+{
+ unsigned int gsi_base = 0x18;
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapics(current);
+
+ /* Write SB IOAPIC. */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ VT8237R_APIC_ID, VT8237R_APIC_BASE, 0);
+
+ /* Write NB IOAPIC. */
+ current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
+ K8T890_APIC_ID, K8T890_APIC_BASE, gsi_base);
+
+ /* IRQ9 ACPI active low. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 9, 9, MP_IRQ_TRIGGER_LEVEL | MP_IRQ_POLARITY_LOW);
+
+ /* IRQ0 -> APIC IRQ2. */
+ current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *)
+ current, 0, 0, 2, 0x0);
+
+ /* Create all subtables for processors. */
+ current = acpi_create_madt_lapic_nmis(current,
+ MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, 1);
+
+ return current;
+}
+
+unsigned long write_acpi_tables(unsigned long start)
+{
+ unsigned long current;
+ acpi_rsdp_t *rsdp;
+ acpi_srat_t *srat;
+ acpi_rsdt_t *rsdt;
+ acpi_mcfg_t *mcfg;
+ acpi_hpet_t *hpet;
+ acpi_madt_t *madt;
+ acpi_fadt_t *fadt;
+ acpi_facs_t *facs;
+ acpi_header_t *dsdt;
+
+ /* Align ACPI tables to 16 byte. */
+ start = (start + 0x0f) & -0x10;
+ current = start;
+
+ printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
+
+ /* We need at least an RSDP and an RSDT table. */
+ rsdp = (acpi_rsdp_t *) current;
+ current += sizeof(acpi_rsdp_t);
+ rsdt = (acpi_rsdt_t *) current;
+ current += sizeof(acpi_rsdt_t);
+
+ /* Clear all table memory. */
+ memset((void *) start, 0, current - start);
+
+ acpi_write_rsdp(rsdp, rsdt);
+ acpi_write_rsdt(rsdt);
+
+ /* We explicitly add these tables later on: */
+ printk_debug("ACPI: * FACS\n");
+ facs = (acpi_facs_t *) current;
+ current += sizeof(acpi_facs_t);
+ acpi_create_facs(facs);
+
+ dsdt = (acpi_header_t *) current;
+ current += ((acpi_header_t *) AmlCode)->length;
+ memcpy((void *) dsdt, (void *) AmlCode,
+ ((acpi_header_t *) AmlCode)->length);
+ dsdt->checksum = 0; /* Don't trust iasl to get this right. */
+ dsdt->checksum = acpi_checksum(dsdt, dsdt->length);
+ printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
+ dsdt->length);
+ printk_debug("ACPI: * FADT\n");
+
+ fadt = (acpi_fadt_t *) current;
+ current += sizeof(acpi_fadt_t);
+
+ acpi_create_fadt(fadt, facs, dsdt);
+ acpi_add_table(rsdt, fadt);
+
+ printk_debug("ACPI: * HPET\n");
+ hpet = (acpi_hpet_t *) current;
+ current += sizeof(acpi_hpet_t);
+ acpi_create_hpet(hpet);
+ acpi_add_table(rsdt, hpet);
+
+ /* If we want to use HPET timers Linux wants an MADT. */
+ printk_debug("ACPI: * MADT\n");
+ madt = (acpi_madt_t *) current;
+ acpi_create_madt(madt);
+ current += madt->header.length;
+ acpi_add_table(rsdt, madt);
+
+ printk_debug("ACPI: * MCFG\n");
+ mcfg = (acpi_mcfg_t *) current;
+ acpi_create_mcfg(mcfg);
+ current += mcfg->header.length;
+ acpi_add_table(rsdt, mcfg);
+
+ printk_debug("ACPI: * SRAT\n");
+ srat = (acpi_srat_t *) current;
+ acpi_create_srat(srat);
+ current += srat->header.length;
+ acpi_add_table(rsdt, srat);
+
+ printk_info("ACPI: done.\n");
+ return current;
+}
diff --git a/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c b/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c
new file mode 100644
index 0000000000..87248cb833
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/cache_as_ram_auto.c
@@ -0,0 +1,294 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2006 AMD
+ * (Written by Yinghai Lu <yinghailu@amd.com> for AMD)
+ * Copyright (C) 2006 MSI
+ * (Written by Bingxun Shi <bingxunshi@gmail.com> for MSI)
+ * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#define ASSEMBLY 1
+#define __ROMCC__
+
+#define RAMINIT_SYSINFO 1
+
+#define CACHE_AS_RAM_ADDRESS_DEBUG 0
+
+unsigned int get_sbdn(unsigned bus);
+
+/* Used by raminit. */
+#define QRANK_DIMM_SUPPORT 1
+
+/* Used by init_cpus and fidvid */
+#define K8_SET_FIDVID 1
+
+/* If we want to wait for core1 done before DQS training, set it to 0. */
+#define K8_SET_FIDVID_CORE0_ONLY 1
+
+#if K8_REV_F_SUPPORT == 1
+#define K8_REV_F_SUPPORT_F0_F1_WORKAROUND 0
+#endif
+
+/* #define DEBUG_SMBUS 1 */
+
+#include <stdint.h>
+#include <device/pci_def.h>
+#include <arch/io.h>
+#include <device/pnp_def.h>
+#include <arch/romcc_io.h>
+#include <cpu/amd/mtrr.h>
+#include <cpu/x86/lapic.h>
+#include "option_table.h"
+#include "pc80/mc146818rtc_early.c"
+#include "pc80/serial.c"
+#include "arch/i386/lib/console.c"
+#include <cpu/amd/model_fxx_rev.h>
+#include "northbridge/amd/amdk8/raminit.h"
+#include "cpu/amd/model_fxx/apic_timer.c"
+#include "lib/delay.c"
+#if CONFIG_USE_INIT == 0
+#include "lib/memcpy.c"
+#endif
+#include "cpu/x86/lapic/boot_cpu.c"
+#include "northbridge/amd/amdk8/reset_test.c"
+#include "northbridge/amd/amdk8/debug.c"
+#include "northbridge/amd/amdk8/early_ht.c"
+#include "superio/ite/it8712f/it8712f_early_serial.c"
+#include "southbridge/via/vt8237r/vt8237r_early_smbus.c"
+#include "cpu/amd/mtrr/amd_earlymtrr.c"
+#include "cpu/x86/bist.h"
+#include "northbridge/amd/amdk8/setup_resource_map.c"
+
+#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1)
+#define WATCHDOG_DEV PNP_DEV(0x2e, IT8712F_GPIO)
+
+static void memreset_setup(void)
+{
+}
+
+static void memreset(int controllers, const struct mem_controller *ctrl)
+{
+}
+
+static inline int spd_read_byte(unsigned device, unsigned address)
+{
+ return smbus_read_byte(device, address);
+}
+
+#define K8_4RANK_DIMM_SUPPORT 1
+
+#include "northbridge/amd/amdk8/amdk8.h"
+#include "northbridge/amd/amdk8/raminit_f.c"
+#include "northbridge/amd/amdk8/coherent_ht.c"
+#include "northbridge/amd/amdk8/incoherent_ht.c"
+#include "sdram/generic_sdram.c"
+#include "cpu/amd/dualcore/dualcore.c"
+#include "southbridge/via/k8t890/k8t890_early_car.c"
+#include "cpu/amd/car/copy_and_run.c"
+#include "cpu/amd/car/post_cache_as_ram.c"
+#include "cpu/amd/model_fxx/init_cpus.c"
+#include "cpu/amd/model_fxx/fidvid.c"
+#include "northbridge/amd/amdk8/resourcemap.c"
+
+void activate_spd_rom(const struct mem_controller *ctrl)
+{
+}
+
+void hard_reset(void)
+{
+ print_info("NO HARD RESET. FIX ME!\n");
+}
+
+void soft_reset(void)
+{
+ uint8_t tmp;
+
+ set_bios_reset();
+ print_debug("soft reset \r\n");
+
+ /* PCI reset */
+ tmp = pci_read_config8(PCI_DEV(0, 0x11, 0), 0x4f);
+ tmp |= 0x01;
+ /* FIXME from S3 set bit1 to disable USB reset VT8237A/S */
+ pci_write_config8(PCI_DEV(0, 0x11, 0), 0x4f, tmp);
+
+ while (1) {
+ /* daisy daisy ... */
+ hlt();
+ }
+}
+
+unsigned int get_sbdn(unsigned bus)
+{
+ device_t dev;
+
+ dev = pci_locate_device_on_bus(PCI_ID(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_VT8237R_LPC), bus);
+ return (dev >> 15) & 0x1f;
+}
+
+void sio_init(void)
+{
+
+}
+
+#if USE_FALLBACK_IMAGE == 1
+
+void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ /* unsigned last_boot_normal_x = last_boot_normal(); */
+ /* FIXME */
+ unsigned last_boot_normal_x = 1;
+
+ sio_init();
+ it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+ enable_rom_decode();
+
+ print_info("now booting... fallback\r\n");
+
+ /* Is this a CPU only reset? Or is this a secondary CPU? */
+ if ((cpu_init_detectedx) || (!boot_cpu())) {
+ if (last_boot_normal_x)
+ goto normal_image;
+ else
+ goto fallback_image;
+ }
+
+ /* Nothing special needs to be done to find bus 0. */
+ /* Allow the HT devices to be found. */
+ enumerate_ht_chain();
+
+ /* Is this a deliberate reset by the BIOS? */
+ if (bios_reset_detected() && last_boot_normal_x) {
+ goto normal_image;
+ }
+ /* This is the primary CPU, how should I boot? */
+ else if (do_normal_boot()) {
+ goto normal_image;
+ } else {
+ goto fallback_image;
+ }
+
+normal_image:
+ /* print_info("JMP normal image\r\n"); */
+
+ __asm__ __volatile__("jmp __normal_image":
+ :"a" (bist), "b" (cpu_init_detectedx));
+
+fallback_image:
+ ;
+}
+#endif
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
+
+void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+#if USE_FALLBACK_IMAGE == 1
+ failover_process(bist, cpu_init_detectedx);
+#endif
+ real_main(bist, cpu_init_detectedx);
+}
+
+void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
+{
+ msr_t msr;
+ static const uint16_t spd_addr[] = {
+ (0xa << 3) | 0, (0xa << 3) | 2, 0, 0,
+ (0xa << 3) | 1, (0xa << 3) | 3, 0, 0,
+#if CONFIG_MAX_PHYSICAL_CPUS > 1
+ (0xa << 3) | 4, (0xa << 3) | 6, 0, 0,
+ (0xa << 3) | 5, (0xa << 3) | 7, 0, 0,
+#endif
+ };
+ unsigned bsp_apicid = 0;
+ int needs_reset = 0;
+ struct sys_info *sysinfo =
+ (DCACHE_RAM_BASE + DCACHE_RAM_SIZE - DCACHE_RAM_GLOBAL_VAR_SIZE);
+ char *p;
+
+ sio_init();
+ it8712f_enable_serial(SERIAL_DEV, TTYS0_BASE);
+ uart_init();
+ console_init();
+ enable_rom_decode();
+
+ print_info("now booting... real_main\r\n");
+
+
+ if (bist == 0)
+ bsp_apicid = init_cpus(cpu_init_detectedx, sysinfo);
+
+ /* Halt if there was a built in self test failure. */
+ report_bist_failure(bist);
+ setup_default_resource_map();
+ setup_coherent_ht_domain();
+ wait_all_core0_started();
+
+ print_info("now booting... Core0 started\r\n");
+
+#if CONFIG_LOGICAL_CPUS==1
+ /* It is said that we should start core1 after all core0 launched. */
+ start_other_cores();
+ wait_all_other_cores_started(bsp_apicid);
+#endif
+ init_timer();
+ ht_setup_chains_x(sysinfo); /* Init sblnk and sbbusn, nodes, sbdn. */
+
+ needs_reset = optimize_link_coherent_ht();
+ print_debug_hex8(needs_reset);
+ needs_reset |= optimize_link_incoherent_ht(sysinfo);
+ print_debug_hex8(needs_reset);
+ needs_reset |= k8t890_early_setup_ht();
+ print_debug_hex8(needs_reset);
+
+ vt8237_early_network_init(NULL);
+ vt8237_early_spi_init();
+
+ if (needs_reset) {
+ print_debug_hex8(needs_reset);
+
+ print_debug("Xht reset -\r\n");
+ soft_reset();
+ print_debug("NO reset\r\n");
+
+ }
+
+
+ /* the HT settings needs to be OK, because link freq chnage may cause HT disconnect */
+ /* allow LDT STOP asserts */
+ vt8237_sb_enable_fid_vid();
+
+ enable_fid_change();
+ print_debug("after enable_fid_change\r\n");
+
+ /* FIXME does not work yet */
+// init_fidvid_bsp(bsp_apicid);
+
+ /* Stop the APs so we can start them later in init. */
+ allow_all_aps_stop(bsp_apicid);
+
+ /* It's the time to set ctrl now. */
+ fill_mem_ctrl(sysinfo->nodes, sysinfo->ctrl, spd_addr);
+ enable_smbus();
+ memreset_setup();
+ sdram_initialize(sysinfo->nodes, sysinfo->ctrl, sysinfo);
+ post_cache_as_ram();
+}
diff --git a/src/mainboard/asus/m2v-mx_se/chip.h b/src/mainboard/asus/m2v-mx_se/chip.h
new file mode 100644
index 0000000000..e2174e3948
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/chip.h
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+extern struct chip_operations mainboard_asus_m2v_mx_se_ops;
+
+struct mainboard_asus_m2v_mx_se_config {
+};
diff --git a/src/mainboard/asus/m2v-mx_se/cmos.layout b/src/mainboard/asus/m2v-mx_se/cmos.layout
new file mode 100644
index 0000000000..ecf89a9b5d
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/cmos.layout
@@ -0,0 +1,98 @@
+entries
+
+#start-bit length config config-ID name
+#0 8 r 0 seconds
+#8 8 r 0 alarm_seconds
+#16 8 r 0 minutes
+#24 8 r 0 alarm_minutes
+#32 8 r 0 hours
+#40 8 r 0 alarm_hours
+#48 8 r 0 day_of_week
+#56 8 r 0 day_of_month
+#64 8 r 0 month
+#72 8 r 0 year
+#80 4 r 0 rate_select
+#84 3 r 0 REF_Clock
+#87 1 r 0 UIP
+#88 1 r 0 auto_switch_DST
+#89 1 r 0 24_hour_mode
+#90 1 r 0 binary_values_enable
+#91 1 r 0 square-wave_out_enable
+#92 1 r 0 update_finished_enable
+#93 1 r 0 alarm_interrupt_enable
+#94 1 r 0 periodic_interrupt_enable
+#95 1 r 0 disable_clock_updates
+#96 288 r 0 temporary_filler
+0 384 r 0 reserved_memory
+384 1 e 4 boot_option
+385 1 e 4 last_boot
+386 1 e 1 ECC_memory
+388 4 r 0 reboot_bits
+392 3 e 5 baud_rate
+395 1 e 1 hw_scrubber
+396 1 e 1 interleave_chip_selects
+397 2 e 8 max_mem_clock
+399 1 e 2 dual_core
+400 1 e 1 power_on_after_fail
+412 4 e 6 debug_level
+416 4 e 7 boot_first
+420 4 e 7 boot_second
+424 4 e 7 boot_third
+428 4 h 0 boot_index
+432 8 h 0 boot_countdown
+440 4 e 9 slow_cpu
+444 1 e 1 nmi
+445 1 e 1 iommu
+728 256 h 0 user_data
+984 16 h 0 check_sum
+# Reserve the extended AMD configuration registers
+1000 24 r 0 reserved_memory
+
+
+
+enumerations
+
+#ID value text
+1 0 Disable
+1 1 Enable
+2 0 Enable
+2 1 Disable
+4 0 Fallback
+4 1 Normal
+5 0 115200
+5 1 57600
+5 2 38400
+5 3 19200
+5 4 9600
+5 5 4800
+5 6 2400
+5 7 1200
+6 6 Notice
+6 7 Info
+6 8 Debug
+6 9 Spew
+7 0 Network
+7 1 HDD
+7 2 Floppy
+7 8 Fallback_Network
+7 9 Fallback_HDD
+7 10 Fallback_Floppy
+#7 3 ROM
+8 0 DDR400
+8 1 DDR333
+8 2 DDR266
+8 3 DDR200
+9 0 off
+9 1 87.5%
+9 2 75.0%
+9 3 62.5%
+9 4 50.0%
+9 5 37.5%
+9 6 25.0%
+9 7 12.5%
+
+checksums
+
+checksum 392 983 984
+
+
diff --git a/src/mainboard/asus/m2v-mx_se/dsdt.asl b/src/mainboard/asus/m2v-mx_se/dsdt.asl
new file mode 100644
index 0000000000..ac32980531
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/dsdt.asl
@@ -0,0 +1,191 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * (C) Copyright 2004 Nick Barker <Nick.Barker9@btinternet.com>
+ * (C) Copyright 2007, 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * ISA portions taken from QEMU acpi-dsdt.dsl.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+DefinitionBlock ("DSDT.aml", "DSDT", 1, "LXBIOS", "LXB-DSDT", 1)
+{
+ /* Define the main processor.*/
+ Scope (\_PR)
+ {
+ Processor (\_PR.CPU0, 0x00, 0x000000, 0x00) {}
+ Processor (\_PR.CPU1, 0x01, 0x000000, 0x00) {}
+ }
+
+ /* For now only define 2 power states:
+ * - S0 which is fully on
+ * - S5 which is soft off
+ * Any others would involve declaring the wake up methods.
+ */
+ Name (\_S0, Package () { 0x00, 0x00, 0x00, 0x00 })
+ Name (\_S5, Package () { 0x02, 0x02, 0x00, 0x00 })
+
+ /* Root of the bus hierarchy */
+ Scope (\_SB)
+ {
+ /* Top PCI device */
+ Device (PCI0)
+ {
+ Name (_HID, EisaId ("PNP0A03"))
+ Name (_ADR, 0x00)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x00)
+
+ /* PCI Routing Table */
+ /* aaa */
+ Name (_PRT, Package () {
+ Package (0x04) { 0x000F0000, 0x01, 0x00, 0x15 }, /* 0xf SATA IRQ 21 */
+ Package (0x04) { 0x000F0001, 0x00, 0x00, 0x14 }, /* 0xf Native IDE IRQ 20 */
+ Package (0x04) { 0x0010FFFF, 0x00, 0x00, 0x15 }, /* USB routing */
+ Package (0x04) { 0x0010FFFF, 0x01, 0x00, 0x15 },
+ Package (0x04) { 0x0010FFFF, 0x02, 0x00, 0x15 },
+ Package (0x04) { 0x0010FFFF, 0x03, 0x00, 0x15 },
+ Package (0x04) { 0x0012FFFF, 0x00, 0x00, 0x17 }, /* LAN */
+ Package (0x04) { 0x0013FFFF, 0x00, 0x00, 0x14 }, /* PCIe bridge SB */
+ Package (0x04) { 0x0013FFFF, 0x02, 0x00, 0x16 }, /* PCIe bridge SB */
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x10 }, /* AGP pridge */
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 }, /* FIXME FIXME */
+ Package (0x04) { 0x0002FFFF, 0x00, 0x00, 0x1B }, /* PCIE16 bridge IRQ27 */
+ Package (0x04) { 0x0002FFFF, 0x01, 0x00, 0x1B },
+ Package (0x04) { 0x0002FFFF, 0x02, 0x00, 0x1B },
+ Package (0x04) { 0x0002FFFF, 0x03, 0x00, 0x1B },
+ Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x1F }, /* PCIE bridge IRQ31 */
+ Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x23 }, /* IRQ36 */
+ Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x27 }, /* IRQ39 */
+ Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x2B } /* IRQ43 */
+ })
+
+ Device (PEGG)
+ {
+ Name (_ADR, 0x00020000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x02)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x18 }, /* PCIE IRQ24-IRQ27 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x19 },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1A },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1B },
+ })
+ }
+
+ Device (PEX0)
+ {
+ Name (_ADR, 0x00030000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x03)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x1C }, /* PCIE IRQ28-IRQ31 */
+ Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x1D },
+ Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x1E },
+ Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x1F },
+ })
+ }
+
+ Device (PEX1)
+ {
+ Name (_ADR, 0x00130000)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x4)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x11 }, /* PCIE audio */
+ Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x11 },
+ Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x11 },
+ })
+ }
+
+ Device (TBRG)
+ {
+ Name (_ADR, 0x00130001)
+ Name (_UID, 0x00)
+ Name (_BBN, 0x5)
+ Name (_PRT, Package () {
+ Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x10 }, /* PCI slot */
+ Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x11 },
+ Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x12 },
+ Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x13 },
+ Package (0x04) { 0x0007FFFF, 0x00, 0x00, 0x11 }, /* PCI slot */
+ Package (0x04) { 0x0007FFFF, 0x01, 0x00, 0x12 },
+ Package (0x04) { 0x0007FFFF, 0x02, 0x00, 0x13 },
+ Package (0x04) { 0x0007FFFF, 0x03, 0x00, 0x10 },
+ })
+ }
+ Device (ISA) {
+ Name (_ADR, 0x00110000)
+
+ /* PS/2 keyboard (seems to be important for WinXP install) */
+ Device (KBD)
+ {
+ Name (_HID, EisaId ("PNP0303"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
+ IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
+ IRQNoFlags () {1}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 mouse */
+ Device (MOU)
+ {
+ Name (_HID, EisaId ("PNP0F13"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (TMP, ResourceTemplate () {
+ IRQNoFlags () {12}
+ })
+ Return (TMP)
+ }
+ }
+
+ /* PS/2 floppy controller */
+ Device (FDC0)
+ {
+ Name (_HID, EisaId ("PNP0700"))
+ Method (_STA, 0, NotSerialized)
+ {
+ Return (0x0f)
+ }
+ Method (_CRS, 0, NotSerialized)
+ {
+ Name (BUF0, ResourceTemplate () {
+ IO (Decode16, 0x03F2, 0x03F2, 0x00, 0x04)
+ IO (Decode16, 0x03F7, 0x03F7, 0x00, 0x01)
+ IRQNoFlags () {6}
+ DMA (Compatibility, NotBusMaster, Transfer8) {2}
+ })
+ Return (BUF0)
+ }
+ }
+ }
+ }
+ }
+}
diff --git a/src/mainboard/asus/m2v-mx_se/fadt.c b/src/mainboard/asus/m2v-mx_se/fadt.c
new file mode 100644
index 0000000000..f77601a022
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/fadt.c
@@ -0,0 +1,153 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2004 Nick Barker <nick.barker9@btinternet.com>
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <arch/acpi.h>
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+
+/**
+ * Create the Fixed ACPI Description Tables (FADT) for this board.
+ */
+void acpi_create_fadt(acpi_fadt_t *fadt, acpi_facs_t *facs, void *dsdt)
+{
+ acpi_header_t *header = &(fadt->header);
+
+ memset((void *) fadt, 0, sizeof(acpi_fadt_t));
+ memcpy(header->signature, "FACP", 4);
+ header->length = 244;
+ header->revision = 1;
+ memcpy(header->oem_id, "COREBO", 6);
+ memcpy(header->oem_table_id, "COREBOOT", 8);
+ memcpy(header->asl_compiler_id, "IASL", 4);
+ header->asl_compiler_revision = 0;
+
+ fadt->firmware_ctrl = facs;
+ fadt->dsdt = dsdt;
+ fadt->preferred_pm_profile = 0;
+ fadt->sci_int = 9;
+ fadt->smi_cmd = 0;
+ fadt->acpi_enable = 0;
+ fadt->acpi_disable = 0;
+ fadt->s4bios_req = 0x0;
+ fadt->pstate_cnt = 0x0;
+
+ fadt->pm1a_evt_blk = VT8237R_ACPI_IO_BASE;
+ fadt->pm1b_evt_blk = 0x0;
+ fadt->pm1a_cnt_blk = VT8237R_ACPI_IO_BASE + 0x4;
+ fadt->pm1b_cnt_blk = 0x0;
+ fadt->pm2_cnt_blk = 0x0;
+ fadt->pm_tmr_blk = VT8237R_ACPI_IO_BASE + 0x8;
+ fadt->gpe0_blk = VT8237R_ACPI_IO_BASE + 0x20;
+ fadt->gpe1_blk = 0x0;
+
+ fadt->pm1_evt_len = 4;
+ fadt->pm1_cnt_len = 2;
+ fadt->pm2_cnt_len = 0;
+ fadt->pm_tmr_len = 4;
+ fadt->gpe0_blk_len = 4;
+ fadt->gpe1_blk_len = 0;
+ fadt->gpe1_base = 0;
+ fadt->cst_cnt = 0;
+ fadt->p_lvl2_lat = 90;
+ fadt->p_lvl3_lat = 900;
+ fadt->flush_size = 0;
+ fadt->flush_stride = 0;
+ fadt->duty_offset = 0;
+ fadt->duty_width = 1; //??
+ fadt->day_alrm = 0x7d;
+ fadt->mon_alrm = 0x7e;
+ fadt->century = 0x32;
+ /* fixme 5 - 10 */
+ fadt->iapc_boot_arch = 0x1;
+ /* fixme */
+ fadt->flags = 0x4a5;
+
+ fadt->reset_reg.space_id = 0;
+ fadt->reset_reg.bit_width = 0;
+ fadt->reset_reg.bit_offset = 0;
+ fadt->reset_reg.resv = 0;
+ fadt->reset_reg.addrl = 0x0;
+ fadt->reset_reg.addrh = 0x0;
+
+ fadt->reset_value = 0;
+ fadt->x_firmware_ctl_l = facs;
+ fadt->x_firmware_ctl_h = 0;
+ fadt->x_dsdt_l = dsdt;
+ fadt->x_dsdt_h = 0;
+
+ fadt->x_pm1a_evt_blk.space_id = 1;
+ fadt->x_pm1a_evt_blk.bit_width = 4;
+ fadt->x_pm1a_evt_blk.bit_offset = 0;
+ fadt->x_pm1a_evt_blk.resv = 0;
+ fadt->x_pm1a_evt_blk.addrl = VT8237R_ACPI_IO_BASE;
+ fadt->x_pm1a_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_evt_blk.space_id = 1;
+ fadt->x_pm1b_evt_blk.bit_width = 4;
+ fadt->x_pm1b_evt_blk.bit_offset = 0;
+ fadt->x_pm1b_evt_blk.resv = 0;
+ fadt->x_pm1b_evt_blk.addrl = 0x0;
+ fadt->x_pm1b_evt_blk.addrh = 0x0;
+
+ fadt->x_pm1a_cnt_blk.space_id = 1;
+ fadt->x_pm1a_cnt_blk.bit_width = 2;
+ fadt->x_pm1a_cnt_blk.bit_offset = 0;
+ fadt->x_pm1a_cnt_blk.resv = 0;
+ fadt->x_pm1a_cnt_blk.addrl = VT8237R_ACPI_IO_BASE + 0x4;
+ fadt->x_pm1a_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm1b_cnt_blk.space_id = 1;
+ fadt->x_pm1b_cnt_blk.bit_width = 2;
+ fadt->x_pm1b_cnt_blk.bit_offset = 0;
+ fadt->x_pm1b_cnt_blk.resv = 0;
+ fadt->x_pm1b_cnt_blk.addrl = 0x0;
+ fadt->x_pm1b_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm2_cnt_blk.space_id = 1;
+ fadt->x_pm2_cnt_blk.bit_width = 0;
+ fadt->x_pm2_cnt_blk.bit_offset = 0;
+ fadt->x_pm2_cnt_blk.resv = 0;
+ fadt->x_pm2_cnt_blk.addrl = 0x0;
+ fadt->x_pm2_cnt_blk.addrh = 0x0;
+
+ fadt->x_pm_tmr_blk.space_id = 1;
+ fadt->x_pm_tmr_blk.bit_width = 4;
+ fadt->x_pm_tmr_blk.bit_offset = 0;
+ fadt->x_pm_tmr_blk.resv = 0;
+ fadt->x_pm_tmr_blk.addrl = VT8237R_ACPI_IO_BASE + 0x8;
+ fadt->x_pm_tmr_blk.addrh = 0x0;
+
+ fadt->x_gpe0_blk.space_id = 1;
+ fadt->x_gpe0_blk.bit_width = 0;
+ fadt->x_gpe0_blk.bit_offset = 0;
+ fadt->x_gpe0_blk.resv = 0;
+ fadt->x_gpe0_blk.addrl = VT8237R_ACPI_IO_BASE + 0x20;
+ fadt->x_gpe0_blk.addrh = 0x0;
+
+ fadt->x_gpe1_blk.space_id = 1;
+ fadt->x_gpe1_blk.bit_width = 0;
+ fadt->x_gpe1_blk.bit_offset = 0;
+ fadt->x_gpe1_blk.resv = 0;
+ fadt->x_gpe1_blk.addrl = 0x0;
+ fadt->x_gpe1_blk.addrh = 0x0;
+
+ header->checksum = acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
+}
diff --git a/src/mainboard/asus/m2v-mx_se/mainboard.c b/src/mainboard/asus/m2v-mx_se/mainboard.c
new file mode 100644
index 0000000000..f46109b561
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/mainboard.c
@@ -0,0 +1,30 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include "chip.h"
+
+#if CONFIG_CHIP_NAME == 1
+struct chip_operations mainboard_asus_m2v_se_ops = {
+ CHIP_NAME("ASUS M2V-MX SE Mainboard")
+};
+#endif
diff --git a/src/mainboard/asus/m2v-mx_se/mptable.c b/src/mainboard/asus/m2v-mx_se/mptable.c
new file mode 100644
index 0000000000..5303672bf0
--- /dev/null
+++ b/src/mainboard/asus/m2v-mx_se/mptable.c
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2008 Rudolf Marek <r.marek@assembler.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License v2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <string.h>
+#include <stdint.h>
+#include <arch/smp/mpspec.h>
+#include <../../../southbridge/via/vt8237r/vt8237r.h>
+#include <../../../southbridge/via/k8t890/k8t890.h>
+
+unsigned long write_smp_table(unsigned long addr)
+{
+ /* place holder for a table, need to have it defined because
+ of MP_ used by ACPI */
+
+ return addr;
+}
diff --git a/targets/asus/m2v-mx_se/Config.lb b/targets/asus/m2v-mx_se/Config.lb
new file mode 100644
index 0000000000..200fc348f7
--- /dev/null
+++ b/targets/asus/m2v-mx_se/Config.lb
@@ -0,0 +1,38 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2007 Rudolf Marek <r.marek@assembler.cz>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License v2 as published by
+## the Free Software Foundation.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+target asus_m2v-mx_se
+mainboard asus/m2v-mx_se
+
+romimage "normal"
+ option ROM_SIZE = 512 * 1024
+ option USE_FALLBACK_IMAGE = 0
+ option ROM_IMAGE_SIZE = 128 * 1024
+ option COREBOOT_EXTRA_VERSION=".0Normal"
+ payload ../payload.elf
+end
+
+romimage "fallback"
+ option USE_FALLBACK_IMAGE = 1
+ option ROM_IMAGE_SIZE = 128 * 1024
+ option COREBOOT_EXTRA_VERSION=".0Fallback"
+ payload ../payload.elf
+end
+
+buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"