summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorNils Jacobs <njacobs8@hetnet.nl>2010-11-03 13:19:50 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2010-11-03 13:19:50 +0000
commit5beac7f996633733d45df28479c20b7574aa60de (patch)
treed677d52decf5c17def9bc2a5a213116d0a18fb84
parentb54585244bbda67908e0baf4c265b85c62868d25 (diff)
downloadcoreboot-5beac7f996633733d45df28479c20b7574aa60de.tar.xz
Clean up some comments and white space in gx2/northbridgeinit.c
and gx2/raminit.c. This is Abuild and boot tested. Signed-off-by: Nils Jacobs <njacobs8@hetnet.nl> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6014 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/northbridge/amd/gx2/northbridgeinit.c367
-rw-r--r--src/northbridge/amd/gx2/raminit.c115
2 files changed, 212 insertions, 270 deletions
diff --git a/src/northbridge/amd/gx2/northbridgeinit.c b/src/northbridge/amd/gx2/northbridgeinit.c
index b71c574cbd..410998a70f 100644
--- a/src/northbridge/amd/gx2/northbridgeinit.c
+++ b/src/northbridge/amd/gx2/northbridgeinit.c
@@ -22,26 +22,25 @@ struct gliutable {
};
struct gliutable gliu0table[] = {
- {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
- {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc*/
- {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo*/
- {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly.*/
+ {.desc_name=MSR_GLIU0_BASE1, .desc_type= BM,.hi= MSR_MC + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name=MSR_GLIU0_BASE2, .desc_type= BM,.hi= MSR_MC + 0x0,.lo=(0x80 << 20) + 0x0FFFE0}, /* 80000-9ffff to Mc */
+ {.desc_name=MSR_GLIU0_SHADOW, .desc_type= SC_SHADOW,.hi= MSR_MC + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) A0000-Bffff handled by SoftVideo */
+ {.desc_name=MSR_GLIU0_SYSMEM, .desc_type= R_SYSMEM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=MSR_GLIU0_DMM, .desc_type= BMO_DMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=MSR_GLIU0_SMM, .desc_type= BMO_SMM,.hi= MSR_MC,.lo= 0x0}, /* Catch and fix dynamicly. */
{.desc_name=GLIU0_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL0_CPU},
{.desc_name=GL_END, .desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
-
struct gliutable gliu1table[] = {
- {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC*/
- {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc*/
- {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode)*/
- {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/
- {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly.*/
+ {.desc_name=MSR_GLIU1_BASE1,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= 0x0FFF80}, /* 0-7FFFF to MC */
+ {.desc_name=MSR_GLIU1_BASE2,.desc_type= BM,.hi= MSR_GL0 + 0x0,.lo= (0x80 << 20) +0x0FFFE0}, /* 80000-9ffff to Mc */
+ {.desc_name=MSR_GLIU1_SHADOW,.desc_type= SC_SHADOW,.hi= MSR_GL0 + 0x0,.lo= 0x03}, /* C0000-Fffff split to MC and PCI (sub decode) */
+ {.desc_name=MSR_GLIU1_SYSMEM,.desc_type= R_SYSMEM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=MSR_GLIU1_DMM,.desc_type= BM_DMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
+ {.desc_name=MSR_GLIU1_SMM,.desc_type= BM_SMM,.hi= MSR_GL0,.lo= 0x0}, /* Catch and fix dynamicly. */
{.desc_name=GLIU1_GLD_MSR_COH,.desc_type= OTHER,.hi= 0x0,.lo= GL1_GLIU0},
- {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0*/
+ {.desc_name=MSR_GLIU1_FPU_TRAP,.desc_type= SCIO,.hi= (GL1_GLCP << 29) + 0x0,.lo= 0x033000F0}, /* FooGlue FPU 0xF0 */
{.desc_name=GL_END,.desc_type= GL_END,.hi= 0x0,.lo= 0x0},
};
@@ -54,18 +53,18 @@ struct msrinit {
struct msrinit ClockGatingDefault [] = {
{GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
- /* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142*/
+ /* MC must stay off in SDR mode. It is turned on in CPUBug??? lotus #77.142 */
{MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}},
{GLIU1_GLD_MSR_PM, {.hi=0x00,.lo=0x0005}},
- {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/
+ {VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163 */
{GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}},
{DF_GLD_MSR_PM, {.hi=0x00,.lo=0x0155}},
{GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
{GLPCI_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
- {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on*/
+ {FG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* Always on */
{0xffffffff, {0xffffffff, 0xffffffff}},
};
- /* All On*/
+ /* All On */
struct msrinit ClockGatingAllOn[] = {
{GLIU0_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}},
{MC_GLD_MSR_PM, {.hi=0x00,.lo=0x0FFFFFFFF}},
@@ -79,7 +78,7 @@ struct msrinit ClockGatingAllOn[] = {
{0xffffffff, {0xffffffff, 0xffffffff}},
};
- /* Performance*/
+ /* Performance */
struct msrinit ClockGatingPerformance[] = {
{VG_GLD_MSR_PM, {.hi=0x00,.lo=0x0000}}, /* lotus #77.163*/
{GP_GLD_MSR_PM, {.hi=0x00,.lo=0x0001}},
@@ -87,19 +86,18 @@ struct msrinit ClockGatingPerformance[] = {
{GLCP_GLD_MSR_PM, {.hi=0x00,.lo=0x0015}},
{0xffffffff, {0xffffffff, 0xffffffff}},
};
-/* */
-/* SET GeodeLink PRIORITY*/
-/* */
+
+ /* SET GeodeLink PRIORITY */
struct msrinit GeodeLinkPriorityTable [] = {
- {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority.*/
- {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority.*/
- {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority.*/
- {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}}, /* Graphics Priority.*/
- {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID*/
- {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID*/
- {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* VIP PID*/
- {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}}, /* AES PID*/
- {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END*/
+ {CPU_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0220}}, /* CPU Priority. */
+ {DF_GLD_MSR_MASTER_CONF, {.hi=0x00,.lo=0x0000}}, /* DF Priority. */
+ {VG_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0720}}, /* VG Primary and Secondary Priority. */
+ {GP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0010}}, /* Graphics Priority. */
+ {GLPCI_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0027}}, /* GLPCI Priority + PID */
+ {GLCP_GLD_MSR_CONF, {.hi=0x00,.lo=0x0001}}, /* GLCP Priority + PID */
+ {VIP_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0622}}, /* VIP PID */
+ {AES_GLD_MSR_CONFIG, {.hi=0x00,.lo=0x0013}}, /* AES PID */
+ {0x0FFFFFFFF, {0x0FFFFFFFF, 0x0FFFFFFFF}}, /* END */
};
/* do we have dmi or not? assume NO per AMD */
@@ -111,7 +109,7 @@ writeglmsr(struct gliutable *gl){
msr.lo = gl->lo;
msr.hi = gl->hi;
- wrmsr(gl->desc_name, msr); // MSR - see table above
+ wrmsr(gl->desc_name, msr); /* MSR - see table above */
printk(BIOS_DEBUG, "%s: write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
/* they do this, so we do this */
msr = rdmsr(gl->desc_name);
@@ -131,10 +129,9 @@ ShadowInit(struct gliutable *gl)
}
/* NOTE: transcribed from assembly code. There is the usual redundant assembly nonsense in here.
- * CLEAN ME UP
- */
-/* yes, this duplicates later code, but it seems that is how they want it done.
- */
+ * CLEAN ME UP
+ */
+/* yes, this duplicates later code, but it seems that is how they want it done. */
static void
SysmemInit(struct gliutable *gl)
{
@@ -161,12 +158,12 @@ SysmemInit(struct gliutable *gl)
sizebytes &= 0xfff00000;
sizebytes |= 0x100;
msr.lo = sizebytes;
- wrmsr(gl->desc_name, msr); // MSR - see table above
+ wrmsr(gl->desc_name, msr); /* MSR - see table above */
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__,
gl->desc_name, msr.hi, msr.lo);
-
}
+
static void
DMMGL0Init(struct gliutable *gl) {
msr_t msr;
@@ -189,11 +186,11 @@ DMMGL0Init(struct gliutable *gl) {
msr.lo = DMM_OFFSET << 8;
msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff;
- wrmsr(gl->desc_name, msr); // MSR - See table above
+ wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
-
}
+
static void
DMMGL1Init(struct gliutable *gl) {
msr_t msr;
@@ -212,10 +209,11 @@ DMMGL1Init(struct gliutable *gl) {
printk(BIOS_ERR, "%s: warning, using DMM_SIZE even though AMD used SMM_SIZE\n", __func__);
msr.lo |= ((~(DMM_SIZE*1024)+1)>>12)&0xfffff;
- wrmsr(gl->desc_name, msr); // MSR - See table above
+ wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
}
+
static void
SMMGL0Init(struct gliutable *gl) {
msr_t msr;
@@ -239,10 +237,11 @@ SMMGL0Init(struct gliutable *gl) {
msr.lo = SMM_OFFSET << 8;
msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
- wrmsr(gl->desc_name, msr); // MSR - See table above
+ wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
}
+
static void
SMMGL1Init(struct gliutable *gl) {
msr_t msr;
@@ -255,7 +254,7 @@ SMMGL1Init(struct gliutable *gl) {
msr.lo = SMM_OFFSET << 8;
msr.lo |= ((~(SMM_SIZE*1024)+1)>>12)&0xfffff;
- wrmsr(gl->desc_name, msr); // MSR - See table above
+ wrmsr(gl->desc_name, msr); /* MSR - See table above */
msr = rdmsr(gl->desc_name);
printk(BIOS_DEBUG, "%s: AFTER write msr 0x%08lx, val 0x%08x:0x%08x\n", __func__, gl->desc_name, msr.hi, msr.lo);
}
@@ -268,69 +267,58 @@ GLIUInit(struct gliutable *gl){
default:
/* For Unknown types: Write then read MSR */
writeglmsr(gl);
- case SC_SHADOW: /* Check for a Shadow entry*/
+ case SC_SHADOW: /* Check for a Shadow entry */
ShadowInit(gl);
break;
- case R_SYSMEM: /* check for a SYSMEM entry*/
+ case R_SYSMEM: /* check for a SYSMEM entry */
SysmemInit(gl);
break;
- case BMO_DMM: /* check for a DMM entry*/
+ case BMO_DMM: /* check for a DMM entry */
DMMGL0Init(gl);
break;
- case BM_DMM : /* check for a DMM entry*/
+ case BM_DMM : /* check for a DMM entry */
DMMGL1Init(gl);
break;
- case BMO_SMM : /* check for a SMM entry*/
+ case BMO_SMM : /* check for a SMM entry */
SMMGL0Init(gl);
break;
- case BM_SMM : /* check for a SMM entry*/
+ case BM_SMM : /* check for a SMM entry */
SMMGL1Init(gl);
break;
}
gl++;
}
-
}
- /* ***************************************************************************/
- /* **/
- /* * GLPCIInit*/
- /* **/
- /* * Set up GLPCI settings for reads/write into memory*/
- /* * R0: 0-640KB,*/
- /* * R1: 1MB - Top of System Memory*/
- /* * R2: SMM Memory*/
- /* * R3: Framebuffer? - not set up yet*/
- /* * R4: ??*/
- /* **/
- /* * Entry:*/
- /* * Exit:*/
- /* * Modified:*/
- /* **/
- /* ***************************************************************************/
+
+/*
+ * Set up GLPCI settings for reads/write into memory.
+ *
+ * R0: 0-640KB,
+ * R1: 1MB - Top of System Memory
+ * R2: SMM Memory
+ * R3: Framebuffer? - not set up yet
+ * R4: ??
+ */
static void GLPCIInit(void){
struct gliutable *gl = 0;
int i;
msr_t msr;
int msrnum;
- /* */
- /* R0 - GLPCI settings for Conventional Memory space.*/
- /* */
- msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT /* 640*/;
- msr.lo = 0 /* 0*/;
+ /* R0 - GLPCI settings for Conventional Memory space. */
+ msr.hi = (0x09F000 >> 12) << GLPCI_RC_UPPER_TOP_SHIFT; /* 640 */
+ msr.lo = 0; /* 0 */
msr.lo |= GLPCI_RC_LOWER_EN_SET+ GLPCI_RC_LOWER_PF_SET + GLPCI_RC_LOWER_WC_SET;
msrnum = GLPCI_RC0;
wrmsr(msrnum, msr);
- /* */
- /* R1 - GLPCI settings for SysMem space.*/
- /* */
- /* Get systop from GLIU0 SYSTOP Descriptor*/
+ /* R1 - GLPCI settings for SysMem space. */
+ /* Get systop from GLIU0 SYSTOP Descriptor */
for(i = 0; gliu0table[i].desc_name != GL_END; i++) {
if (gliu0table[i].desc_type == R_SYSMEM) {
gl = &gliu0table[i];
@@ -345,8 +333,8 @@ static void GLPCIInit(void){
* translates to a base of 0x00100000 and top of 0xffbf0000
* base of 1M and top of around 256M
*/
- /* we have to create a page-aligned (4KB page) address for base and top */
- /* So we need a high page aligned addresss (pah) and low page aligned address (pal)
+ /* we have to create a page-aligned (4KB page) address for base and top
+ * So we need a high page aligned addresss (pah) and low page aligned address (pal)
* pah is from msr.hi << 12 | msr.low >> 20. pal is msr.lo << 12
*/
printk(BIOS_DEBUG, "GLPCI r1: system msr.lo 0x%08x msr.hi 0x%08x\n", msr.lo, msr.hi);
@@ -363,9 +351,7 @@ static void GLPCIInit(void){
wrmsr(msrnum, msr);
}
- /* */
- /* R2 - GLPCI settings for SMM space.*/
- /* */
+ /* R2 - GLPCI settings for SMM space. */
msr.hi = ((SMM_OFFSET+(SMM_SIZE*1024-1)) >> 12) << GLPCI_RC_UPPER_TOP_SHIFT;
msr.lo = (SMM_OFFSET >> 12) << GLPCI_RC_LOWER_BASE_SHIFT;
msr.lo |= GLPCI_RC_LOWER_EN_SET | GLPCI_RC_LOWER_PF_SET;
@@ -373,9 +359,9 @@ static void GLPCIInit(void){
wrmsr(msrnum, msr);
/* this is done elsewhere already, but it does no harm to do it more than once */
- /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility.*/
- msr.lo = 0x021212121 /* cache disabled and write serialized*/;
- msr.hi = 0x021212121 /* cache disabled and write serialized*/;
+ /* write serialize memory hole to PCI. Need to to unWS when something is shadowed regardless of cachablility. */
+ msr.lo = 0x021212121; /* cache disabled and write serialized */
+ msr.hi = 0x021212121; /* cache disabled and write serialized */
msrnum = CPU_RCONF_A0_BF;
wrmsr(msrnum, msr);
@@ -386,7 +372,7 @@ static void GLPCIInit(void){
msrnum = CPU_RCONF_E0_FF;
wrmsr(msrnum, msr);
- /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup.*/
+ /* Set Non-Cacheable Read Only for NorthBound Transactions to Memory. The Enable bit is handled in the Shadow setup. */
msrnum = GLPCI_A0_BF;
msr.hi = 0x35353535;
msr.lo = 0x35353535;
@@ -402,29 +388,26 @@ static void GLPCIInit(void){
msr.lo = 0x35353535;
wrmsr(msrnum, msr);
- /* Set WSREQ*/
+ /* Set WSREQ */
msrnum = CPU_DM_CONFIG0;
msr = rdmsr(msrnum);
msr.hi &= ~ (7 << DM_CONFIG0_UPPER_WSREQ_SHIFT);
- msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode.*/
+ msr.hi |= 2 << DM_CONFIG0_UPPER_WSREQ_SHIFT ; /* reduce to 1 for safe mode. */
wrmsr(msrnum, msr);
/* we are ignoring the 5530 case for now, and perhaps forever. */
- /* */
- /* 5535 NB Init*/
- /* */
+ /* 5535 NB Init */
msrnum = GLPCI_ARB;
msr = rdmsr(msrnum);
msr.hi |= GLPCI_ARB_UPPER_PRE0_SET | GLPCI_ARB_UPPER_PRE1_SET;
msr.lo |= GLPCI_ARB_LOWER_IIE_SET;
wrmsr(msrnum, msr);
-
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .)*/
+ msr.lo |= GLPCI_CTRL_LOWER_ME_SET | GLPCI_CTRL_LOWER_OWC_SET | GLPCI_CTRL_LOWER_PCD_SET; /* (Out will be disabled in CPUBUG649 for < 2.0 parts .) */
msr.lo |= GLPCI_CTRL_LOWER_LDE_SET;
msr.lo &= ~ (0x03 << GLPCI_CTRL_LOWER_IRFC_SHIFT);
@@ -449,37 +432,23 @@ static void GLPCIInit(void){
msr.hi |= 0x00 << GLPCI_CTRL_UPPER_ILTO_SHIFT;
wrmsr(msrnum, msr);
-
- /* Set GLPCI Latency Timer.*/
+ /* Set GLPCI Latency Timer. */
msrnum = GLPCI_CTRL;
msr = rdmsr(msrnum);
- msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone.*/
+ msr.hi |= 0x1F << GLPCI_CTRL_UPPER_LAT_SHIFT; /* Change once 1.x is gone. */
wrmsr(msrnum, msr);
- /* GLPCI_SPARE*/
+ /* GLPCI_SPARE */
msrnum = GLPCI_SPARE;
msr = rdmsr(msrnum);
msr.lo &= ~ 0x7;
msr.lo |= GLPCI_SPARE_LOWER_AILTO_SET | GLPCI_SPARE_LOWER_PPD_SET | GLPCI_SPARE_LOWER_PPC_SET | GLPCI_SPARE_LOWER_MPC_SET | GLPCI_SPARE_LOWER_NSE_SET | GLPCI_SPARE_LOWER_SUPO_SET;
wrmsr(msrnum, msr);
-
}
-
-
- /* ***************************************************************************/
- /* **/
- /* * ClockGatingInit*/
- /* **/
- /* * Enable Clock Gating.*/
- /* **/
- /* * Entry:*/
- /* * Exit:*/
- /* * Modified:*/
- /* **/
- /* ***************************************************************************/
-static void
-ClockGatingInit (void){
+/* Enable Clock Gating. */
+static void ClockGatingInit (void)
+{
msr_t msr;
struct msrinit *gating = ClockGatingDefault;
int i;
@@ -511,14 +480,13 @@ performance:
msr.lo |= gating->msr.lo;
printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__,
gating->msrnum, msr.hi, msr.lo);
- wrmsr(gating->msrnum, msr); // MSR - See the table above
+ wrmsr(gating->msrnum, msr); /* MSR - See the table above */
gating +=1;
}
-
}
-static void
-GeodeLinkPriority(void){
+static void GeodeLinkPriority(void)
+{
msr_t msr;
struct msrinit *prio = GeodeLinkPriorityTable;
int i;
@@ -531,17 +499,16 @@ GeodeLinkPriority(void){
msr.lo |= prio->msr.lo;
printk(BIOS_DEBUG, "%s: MSR 0x%08lx will be set to 0x%08x:0x%08x\n", __func__,
prio->msrnum, msr.hi, msr.lo);
- wrmsr(prio->msrnum, msr); // MSR - See the table above
+ wrmsr(prio->msrnum, msr); /* MSR - See the table above */
prio +=1;
}
}
-
-
/*
- * Get the GLIU0 shadow register settings
- * If the setShadow function is used then all shadow descriptors
- * will stay sync'ed.
+ * Get the GLIU0 shadow register settings.
+ *
+ * If the setShadow function is used then all shadow descriptors
+ * will stay sync'ed.
*/
static uint64_t getShadow(void)
{
@@ -550,83 +517,81 @@ static uint64_t getShadow(void)
return ( ( (uint64_t) msr.hi ) << 32 ) | msr.lo;
}
-
/*
- * Set the cache RConf registers for the memory hole.
- * Keeps all cache shadow descriptors sync'ed.
- * This is part of the PCI lockup solution
- * Entry: EDX:EAX is the shadow settings
+ * Set the cache RConf registers for the memory hole.
+ *
+ * Keeps all cache shadow descriptors sync'ed.
+ * This is part of the PCI lockup solution.
+ *
+ * Entry: EDX:EAX is the shadow settings.
*/
static void setShadowRCONF(uint32_t shadowHi, uint32_t shadowLo)
{
- // ok this is whacky bit translation time.
+ /* ok this is whacky bit translation time. */
int bit;
uint8_t shadowByte;
msr_t msr;
shadowByte = (uint8_t) (shadowLo >> 16);
- // load up D000 settings in edx.
+ /* load up D000 settings in edx. */
for (bit = 8; (bit > 4); bit--) {
msr.hi <<= 8;
- msr.hi |= 1; // cache disable PCI/Shadow memory
+ msr.hi |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
- msr.hi |= 0x20; // write serialize PCI memory
+ msr.hi |= 0x20; /* write serialize PCI memory */
}
- // load up C000 settings in eax.
+ /* load up C000 settings in eax. */
for ( ; bit; bit--) {
msr.lo <<= 8;
- msr.lo |= 1; // cache disable PCI/Shadow memory
+ msr.lo |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
- msr.lo |= 0x20; // write serialize PCI memory
+ msr.lo |= 0x20; /* write serialize PCI memory */
}
wrmsr(CPU_RCONF_C0_DF, msr);
shadowByte = (uint8_t) (shadowLo >> 24);
- // load up F000 settings in edx.
+ /* load up F000 settings in edx. */
for (bit = 8; (bit > 4); bit--) {
msr.hi <<= 8;
- msr.hi |= 1; // cache disable PCI/Shadow memory
+ msr.hi |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
- msr.hi |= 0x20; // write serialize PCI memory
+ msr.hi |= 0x20; /* write serialize PCI memory */
}
- // load up E000 settings in eax.
+ /* load up E000 settings in eax. */
for ( ; bit; bit--) {
msr.lo <<= 8;
- msr.lo |= 1; // cache disable PCI/Shadow memory
+ msr.lo |= 1; /* cache disable PCI/Shadow memory */
if (shadowByte && (1 << bit))
- msr.lo |= 0x20; // write serialize PCI memory
+ msr.lo |= 0x20; /* write serialize PCI memory */
}
wrmsr(CPU_RCONF_E0_FF, msr);
}
-
/*
- * Set the GLPCI registers for the memory hole.
- * Keeps all cache shadow descriptors sync'ed.
- * Entry: EDX:EAX is the shadow settings
+ * Set the GLPCI registers for the memory hole.
+ * Keeps all cache shadow descriptors sync'ed.
+ * Entry: EDX:EAX is the shadow settings
*/
static void setShadowGLPCI(uint32_t shadowHi, uint32_t shadowLo)
{
msr_t msr;
-// Set the Enable Register.
-
+ /* Set the Enable Register. */
msr = rdmsr(GLPCI_REN);
msr.lo &= 0xFFFF00FF;
msr.lo |= ( (shadowLo & 0xFFFF0000) >> 8);
wrmsr(GLPCI_REN, msr);
}
-
/*
- * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW.
- * Keeps all shadow descriptors sync'ed.
- * Entry: EDX:EAX is the shadow settings
+ * Set the GLIU SC register settings. Scans descriptor tables for SC_SHADOW.
+ * Keeps all shadow descriptors sync'ed.
+ * Entry: EDX:EAX is the shadow settings
*/
static void setShadow(uint64_t shadowSettings)
{
@@ -647,50 +612,34 @@ static void setShadow(uint64_t shadowSettings)
msr = rdmsr(pTable->desc_name);
msr.lo = (uint32_t) shadowSettings;
- msr.hi &= 0xFFFF0000; // maintain PDID in upper EDX
+ msr.hi &= 0xFFFF0000; /* maintain PDID in upper EDX */
msr.hi |= ((uint32_t) (shadowSettings >> 32)) & 0x0000FFFF;
- wrmsr(pTable->desc_name, msr); // MSR - See the table above
+ wrmsr(pTable->desc_name, msr); /* MSR - See the table above */
}
}
}
}
-/**************************************************************************
- *
- * shadowRom
- *
- * Set up a stack for ease of further testing
- *
- * Entry:
- * Exit:
- * Destroys:
- *
- **************************************************************************/
-static void
-shadowRom(void)
+/* Set up a stack for ease of further testing. */
+static void shadowRom(void)
{
uint64_t shadowSettings = getShadow();
- shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; // Disable read & writes
- shadowSettings |= (uint64_t) 0x0000FFFFFFFF0000ULL; // Enable reads for C0000-FFFFF
+ shadowSettings &= (uint64_t) 0xFFFF00000000FFFFULL; /* Disable read & writes */
+ shadowSettings |= (uint64_t) 0x0000FFFFFFFF0000ULL; /* Enable reads for C0000-FFFFF */
setShadow(shadowSettings);
}
-
-
-/***************************************************************************
- *
- * RCONFInit
- * Set up RCONF_DEFAULT and any other RCONF registers needed
- *
- * DEVRC_RCONF_DEFAULT:
- * ROMRC(63:56) = 04h ; write protect ROMBASE
- * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area
- * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst.
- * SYSTOP(27:8) = top of system memory
- * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
+/*
+ * Set up RCONF_DEFAULT and any other RCONF registers needed.
*
- ***************************************************************************/
+ * DEVRC_RCONF_DEFAULT:
+ * ROMRC(63:56) = 04h ; write protect ROMBASE
+ * ROMBASE(36:55) = 0FFFC0h ; Top of PCI/bottom of rom chipselect area
+ * DEVRC(35:28) = 39h ; cache disabled in PCI memory + WS bit on + Write Combine + write burst.
+ * SYSTOP(27:8) = top of system memory
+ * SYSRC(7:0) = 00h ; writeback, can set to 08h to make writethrough
+ */
#define SYSMEM_RCONF_WRITETHROUGH 8
#define DEVRC_RCONF_DEFAULT 0x21
#define ROMBASE_RCONF_DEFAULT 0xFFFC0000
@@ -712,11 +661,11 @@ RCONFInit(void)
}
}
if (gl == 0) {
- post_code(0xCE); /* POST_RCONFInitError */
+ post_code(0xCE); /* POST_RCONFInitError */
while (1);
}
-// sysdescfound:
+/* sysdescfound: */
/* found the descriptor... get its contents */
msr = rdmsr(gl->desc_name);
@@ -725,26 +674,26 @@ RCONFInit(void)
*/
msr.lo = (msr.lo & 0xFFFFFF00) | (msr.hi & 0xFF);
msr.lo = ((msr.lo << 12) | (msr.lo >> 20)) & 0x000FFFFF;
- msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; // 8
+ msr.lo <<= RCONF_DEFAULT_LOWER_SYSTOP_SHIFT; /* 8 */
- // Set Default SYSMEM region properties
- msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; // 8 (or ~8)
+ /* Set Default SYSMEM region properties */
+ msr.lo &= ~SYSMEM_RCONF_WRITETHROUGH; /* 8 (or ~8) */
- // Set PCI space cache properties
- msr.hi = (DEVRC_RCONF_DEFAULT >> 4); // only need the bottom bits and lets clean the rest of edx
+ /* Set PCI space cache properties */
+ msr.hi = (DEVRC_RCONF_DEFAULT >> 4); /* only need the bottom bits and lets clean the rest of edx */
msr.lo |= (DEVRC_RCONF_DEFAULT << 28);
- // Set the ROMBASE. This is usually FFFC0000h
+ /* Set the ROMBASE. This is usually FFFC0000h */
msr.hi |= (ROMBASE_RCONF_DEFAULT >> 12) << RCONF_DEFAULT_UPPER_ROMBASE_SHIFT;
- // Set ROMBASE cache properties.
+ /* Set ROMBASE cache properties. */
msr.hi |= ((ROMRC_RCONF_DEFAULT >> 8) | (ROMRC_RCONF_DEFAULT << 24));
- // now program RCONF_DEFAULT
+ /* now program RCONF_DEFAULT */
wrmsr(CPU_RCONF_DEFAULT, msr);
- // RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties.
- // Set to match system memory cache properties.
+ /* RCONF_BYPASS: Cache tablewalk properties and SMM/DMM header access properties. */
+ /* Set to match system memory cache properties. */
msr = rdmsr(CPU_RCONF_DEFAULT);
SysMemCacheProp = (uint8_t) (msr.lo & 0xFF);
msr = rdmsr(CPU_RCONF_BYPASS);
@@ -752,21 +701,8 @@ RCONFInit(void)
wrmsr(CPU_RCONF_BYPASS, msr);
}
-
-/* ***************************************************************************/
-/* **/
-/* * northBridgeInit*/
-/* **/
-/* * Core Logic initialization: Host bridge*/
-/* **/
-/* * Entry:*/
-/* * Exit:*/
-/* * Modified:*/
-/* **/
-/* ***************************************************************************/
-
-void
-northbridgeinit(void)
+/* Core Logic initialization: Host bridge. */
+void northbridgeinit(void)
{
msr_t msr;
int i;
@@ -779,22 +715,23 @@ northbridgeinit(void)
shadowRom();
- // GeodeROM ensures that the BIOS waits the required 1 second before
- // allowing anything to access PCI
+ /* GeodeROM ensures that the BIOS waits the required 1 second before */
+ /* allowing anything to access PCI */
// PCIDelay();
RCONFInit();
- // The cacheInit function in GeodeROM tests cache and, among other things,
- // makes sure all INVD instructions are treated as WBINVD. We do this
- // because we've found some programs which require this behavior.
- // That subset of cacheInit() is implemented here:
+ /* The cacheInit function in GeodeROM tests cache and, among other things,
+ * makes sure all INVD instructions are treated as WBINVD. We do this
+ * because we've found some programs which require this behavior.
+ * That subset of cacheInit() is implemented here:
+ */
msr = rdmsr(CPU_DM_CONFIG0);
msr.lo |= DM_CONFIG0_LOWER_WBINVD_SET;
wrmsr(CPU_DM_CONFIG0, msr);
- /* Now that the descriptor to memory is set up.*/
- /* The memory controller needs one read to synch its lines before it can be used.*/
+ /* Now that the descriptor to memory is set up. */
+ /* The memory controller needs one read to synch its lines before it can be used. */
i = *(int *) 0;
GLPCIInit();
diff --git a/src/northbridge/amd/gx2/raminit.c b/src/northbridge/amd/gx2/raminit.c
index 7ceb81a4e3..a895ea8fee 100644
--- a/src/northbridge/amd/gx2/raminit.c
+++ b/src/northbridge/amd/gx2/raminit.c
@@ -80,12 +80,13 @@ static void auto_size_dimm(unsigned int dimm)
dimm_setting |= (spd_byte >> 2) << CF07_UPPER_D0_CB_SHIFT;
banner("SPDNUMROWS");
- /*; Field: DIMM size
- *; EEPROM byte usage: (3) Number of Row Addresses
- *; (4) Number of Column Addresses
- *; (5) Number of DIMM Banks
- *; (31) Module Bank Density
- *; Size = Module Density * Module Banks
+ /* Field: DIMM size
+ * EEPROM byte usage:
+ * (3) Number of Row Addresses
+ * (4) Number of Column Addresses
+ * (5) Number of DIMM Banks
+ * (31) Module Bank Density
+ * Size = Module Density * Module Banks
*/
if ((spd_read_byte(dimm, SPD_NUM_ROWS) & 0xF0)
|| (spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF0)) {
@@ -100,7 +101,7 @@ static void auto_size_dimm(unsigned int dimm)
dimm_size |= (dimm_size << 8); /* align so 1GB(bit0) is bit 8, this is a little weird to get gcc to not optimize this out */
dimm_size &= 0x01FC; /* and off 2GB DIMM size : not supported and the 1GB size we just moved up to bit 8 as well as all the extra on top */
- /* Module Density * Module Banks */
+ /* Module Density * Module Banks */
dimm_size <<= (dimm_setting >> CF07_UPPER_D0_MB_SHIFT) & 1; /* shift to multiply by # DIMM banks */
banner("BEFORT CTZ");
dimm_size = __builtin_ctz(dimm_size);
@@ -113,27 +114,32 @@ static void auto_size_dimm(unsigned int dimm)
dimm_setting |= dimm_size << CF07_UPPER_D0_SZ_SHIFT;
banner("PAGESIZE");
-/*; Field: PAGE size
-*; EEPROM byte usage: (4) Number of Column Addresses
-*; PageSize = 2^# Column Addresses * Data width in bytes (should be 8bytes for a normal DIMM)
-*
-*; But this really works by magic.
-*; If ma[11:0] is the memory address pins, and pa[13:0] is the physical column address
-*; that MC generates, here is how the MC assigns the pa onto the ma pins:
-*
-*;ma 11 10 09 08 07 06 05 04 03 02 01 00
-*;--------------------------------------------------------------------------------------------------------------------------------------
-*;pa 09 08 07 06 05 04 03 (7 col addr bits = 1K page size)
-*;pa 10 09 08 07 06 05 04 03 (8 col addr bits = 2K page size)
-*;pa 11 10 09 08 07 06 05 04 03 (9 col addr bits = 4K page size)
-*;pa 12 11 10 09 08 07 06 05 04 03 (10 col addr bits = 8K page size)
-*;pa 13 AP 12 11 10 09 08 07 06 05 04 03 (11 col addr bits = 16K page size)
-*; *AP=autoprecharge bit
-*
-*; Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes),
-*; so lower 3 address bits are dont_cares.So from the table above,
-*; it's easier to see what the old code is doing: if for example,#col_addr_bits=7(06h),
-*; it adds 3 to get 10, then does 2^10=1K. Get it?*/
+/*
+ * Field: PAGE size
+ * EEPROM byte usage: (4) Number of Column Addresses
+ * PageSize = 2^# Column Addresses * Data width in bytes
+ * (should be 8bytes for a normal DIMM)
+ *
+ * But this really works by magic.
+ * If ma[11:0] is the memory address pins, and pa[13:0] is the physical column
+ * address that MC generates, here is how the MC assigns the pa onto the
+ * ma pins:
+ *
+ * ma 11 10 09 08 07 06 05 04 03 02 01 00
+ * ---------------------------------------
+ * pa 09 08 07 06 05 04 03 (7 col addr bits = 1K page size)
+ * pa 10 09 08 07 06 05 04 03 (8 col addr bits = 2K page size)
+ * pa 11 10 09 08 07 06 05 04 03 (9 col addr bits = 4K page size)
+ * pa 12 11 10 09 08 07 06 05 04 03 (10 col addr bits = 8K page size)
+ * pa 13 AP 12 11 10 09 08 07 06 05 04 03 (11 col addr bits = 16K page size)
+ *
+ * (AP = autoprecharge bit)
+ *
+ * Remember that pa[2:0] are zeroed out since it's a 64-bit data bus (8 bytes),
+ * so lower 3 address bits are dont_cares. So from the table above,
+ * it's easier to see what the old code is doing: if for example,
+ * #col_addr_bits=7(06h), it adds 3 to get 10, then does 2^10=1K.
+ */
spd_byte = NumColAddr[spd_read_byte(dimm, SPD_NUM_COLUMNS) & 0xF];
banner("MAXCOLADDR");
@@ -269,26 +275,25 @@ static u8 getcasmap(u32 dimm, u16 glspeed)
static void setCAS(void)
{
-/*;*****************************************************************************
-;*
-;* setCAS
-;* EEPROM byte usage: (18) SDRAM device attributes - CAS latency
-;* EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5
-;* EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1
-;*
-;* The CAS setting is based on the information provided in each DIMMs SPD.
-;* The speed at which a DIMM can run is described relative to the slowest
-;* CAS the DIMM supports. Each speed for the relative CAS settings is
-;* checked that it is within the GeodeLink speed. If it isn't within the GeodeLink
-;* speed, the CAS setting is removed from the list of good settings for
-;* the DIMM. This is done for both DIMMs and the lists are compared to
-;* find the lowest common CAS latency setting. If there are no CAS settings
-;* in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt.
-;*
-;* Entry:
-;* Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information.
-;* Destroys: We really use everything !
-;*****************************************************************************/
+/*
+ * setCAS
+ * EEPROM byte usage: (18) SDRAM device attributes - CAS latency
+ * EEPROM byte usage: (23) SDRAM Minimum Clock Cycle Time @ CLX -.5
+ * EEPROM byte usage: (25) SDRAM Minimum Clock Cycle Time @ CLX -1
+ *
+ * The CAS setting is based on the information provided in each DIMMs SPD.
+ * The speed at which a DIMM can run is described relative to the slowest
+ * CAS the DIMM supports. Each speed for the relative CAS settings is
+ * checked that it is within the GeodeLink speed. If it isn't within the GeodeLink
+ * speed, the CAS setting is removed from the list of good settings for
+ * the DIMM. This is done for both DIMMs and the lists are compared to
+ * find the lowest common CAS latency setting. If there are no CAS settings
+ * in common we out a ERROR_DIFF_DIMMS (78h) to port 80h and halt.
+ *
+ * Entry:
+ * Exit: Set fastest CAS Latency based on GeodeLink speed and SPD information.
+ * Destroys: We really use everything !
+ */
uint16_t glspeed;
uint8_t spd_byte, casmap0, casmap1;
msr_t msr;
@@ -298,7 +303,7 @@ static void setCAS(void)
casmap0 = getcasmap(DIMM0, glspeed);
casmap1 = getcasmap(DIMM1, glspeed);
- /********************* CAS_LAT MAP COMPARE ***************************/
+ /* CAS_LAT MAP COMPARE */
if (casmap0 == 0) {
spd_byte = CASDDR[__builtin_ctz(casmap1)];
} else if (casmap1 == 0) {
@@ -468,7 +473,7 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
uint8_t spd_byte;
banner("sdram_set_spd_register");
- post_code(POST_MEM_SETUP); // post_70h
+ post_code(POST_MEM_SETUP); /* post_70h */
spd_byte = spd_read_byte(DIMM0, SPD_MODULE_ATTRIBUTES);
banner("Check DIMM 0");
@@ -486,23 +491,23 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl)
hcf();
}
- post_code(POST_MEM_SETUP2); // post_72h
+ post_code(POST_MEM_SETUP2); /* post_72h */
banner("Check DDR MAX");
/* Check that the memory is not overclocked. */
checkDDRMax();
/* Size the DIMMS */
- post_code(POST_MEM_SETUP3); // post_73h
+ post_code(POST_MEM_SETUP3); /* post_73h */
banner("AUTOSIZE DIMM 0");
auto_size_dimm(DIMM0);
- post_code(POST_MEM_SETUP4); // post_74h
+ post_code(POST_MEM_SETUP4); /* post_74h */
banner("AUTOSIZE DIMM 1");
auto_size_dimm(DIMM1);
/* Set CAS latency */
banner("set cas latency");
- post_code(POST_MEM_SETUP5); // post_75h
+ post_code(POST_MEM_SETUP5); /* post_75h */
setCAS();
/* Set all the other latencies here (tRAS, tRP....) */
@@ -563,7 +568,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl)
//print_debug("sdram_enable step 6\n");
/* 7. Reset DLL, Bit 27 is undocumented in GX datasheet,
- * it is documented in LX datasheet */
+ * it is documented in LX datasheet */
/* load Mode Register by set and clear PROG_DRAM */
msr = rdmsr(MC_CF07_DATA);
msr.lo |= ((0x01 << 27) | 0x01);