summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid Hendricks <dhendricks@fb.com>2017-12-01 20:49:48 -0800
committerPatrick Rudolph <siro@das-labor.org>2018-07-10 07:01:57 +0000
commit8cbd569f74d8929387730e45b0d6e993b1365c02 (patch)
treeca6414a4d81e37280887b0da0f1a6120a50f0a3a
parent03d31427338ba59d3a354ac1beb3b0c153471768 (diff)
downloadcoreboot-8cbd569f74d8929387730e45b0d6e993b1365c02.tar.xz
cavium: Add CN81xx SoC and eval board support
This adds Cavium CN81xx SoC and SFF EVB files. Code is based off of Cavium's Octeon-TX SDK: https://github.com/Cavium-Open-Source-Distributions/OCTEON-TX-SDK BDK coreboot differences: bootblock: - Get rid of BDK header - Add Kconfig for link address - Move CAR setup code into assembly - Move unaligned memory access enable into assembly - Implement custom bootblock entry function - Add CLIB and CSIB blobs romstage: - Use minimal DRAM init only devicetree: - Convert FTD to static C file containing key value pairs Tested on CN81xx: - Boots to payload - Tested with GNU/Linux 4.16.3 - All hardware is usable (after applying additional commits) Implemented in future commits: - Vboot integration - MMU suuport - L2 Cache handling - ATF from external repo - Devicetree patching - Extended DRAM testing - UART init Not working: - Booting a payload - Booting upstream ATF TODO: - Configuration straps Change-Id: I47b4412d29203b45aee49bfa026c1d86ef7ce688 Signed-off-by: David Hendricks <dhendricks@fb.com> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/23037 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
-rw-r--r--src/mainboard/cavium/Kconfig30
-rw-r--r--src/mainboard/cavium/Kconfig.name2
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/Kconfig68
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/Kconfig.name2
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/Makefile.inc27
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/bdk_devicetree.c125
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/board.fmd24
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/board_info.txt6
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/bootblock.c46
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/cn81xx-linux.dtsi496
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/ddr4-common.dtsi802
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/devicetree.cb18
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/mainboard.c216
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/memlayout.ld1
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/romstage.c45
-rw-r--r--src/mainboard/cavium/cn8100_sff_evb/sff8104-linux.dts282
-rw-r--r--src/soc/cavium/Kconfig2
-rw-r--r--src/soc/cavium/cn81xx/Kconfig27
-rw-r--r--src/soc/cavium/cn81xx/Makefile.inc70
-rw-r--r--src/soc/cavium/cn81xx/bootblock.c50
-rw-r--r--src/soc/cavium/cn81xx/bootblock_custom.S257
-rw-r--r--src/soc/cavium/cn81xx/chip.h22
-rw-r--r--src/soc/cavium/cn81xx/clock.c79
-rw-r--r--src/soc/cavium/cn81xx/cpu.c26
-rw-r--r--src/soc/cavium/cn81xx/gpio.c193
-rw-r--r--src/soc/cavium/cn81xx/include/soc/addressmap.h123
-rw-r--r--src/soc/cavium/cn81xx/include/soc/clock.h26
-rw-r--r--src/soc/cavium/cn81xx/include/soc/cpu.h22
-rw-r--r--src/soc/cavium/cn81xx/include/soc/gpio.h34
-rw-r--r--src/soc/cavium/cn81xx/include/soc/memlayout.ld41
-rw-r--r--src/soc/cavium/cn81xx/include/soc/sdram.h25
-rw-r--r--src/soc/cavium/cn81xx/include/soc/soc.h43
-rw-r--r--src/soc/cavium/cn81xx/include/soc/spi.h40
-rw-r--r--src/soc/cavium/cn81xx/include/soc/timer.h30
-rw-r--r--src/soc/cavium/cn81xx/include/soc/twsi.h23
-rw-r--r--src/soc/cavium/cn81xx/include/soc/uart.h25
-rw-r--r--src/soc/cavium/cn81xx/sdram.c94
-rw-r--r--src/soc/cavium/cn81xx/soc.c65
-rw-r--r--src/soc/cavium/cn81xx/spi.c401
-rw-r--r--src/soc/cavium/cn81xx/timer.c226
-rw-r--r--src/soc/cavium/cn81xx/twsi.c696
-rw-r--r--src/soc/cavium/cn81xx/uart.c265
-rw-r--r--src/soc/cavium/common/Kconfig12
-rw-r--r--src/soc/cavium/common/Makefile.inc58
-rw-r--r--src/soc/cavium/common/bdk-coreboot.c130
-rw-r--r--src/soc/cavium/common/bl31_plat_params.c32
-rw-r--r--src/soc/cavium/common/bootblock.c68
-rw-r--r--src/soc/cavium/common/cbmem.c26
-rw-r--r--src/soc/cavium/common/include/soc/bl31_plat_params.h25
-rw-r--r--src/soc/cavium/common/include/soc/bootblock.h29
-rw-r--r--src/soc/cavium/common/include/soc/sysreg.h65
-rw-r--r--src/soc/cavium/common/rom_clib_s_nbl1fw.bin.hex16
-rw-r--r--src/soc/cavium/common/rom_csib_s_nbl1fw.bin.hex16
-rw-r--r--src/vendorcode/cavium/include/bdk/bdk-coreboot.h173
-rw-r--r--src/vendorcode/cavium/include/bdk/bdk-minimal.h14
55 files changed, 5750 insertions, 9 deletions
diff --git a/src/mainboard/cavium/Kconfig b/src/mainboard/cavium/Kconfig
new file mode 100644
index 0000000000..ec0a791119
--- /dev/null
+++ b/src/mainboard/cavium/Kconfig
@@ -0,0 +1,30 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright (C) 2018 Facebook Inc
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+if VENDOR_CAVIUM
+
+choice
+ prompt "Mainboard model"
+
+source "src/mainboard/cavium/*/Kconfig.name"
+
+endchoice
+
+source "src/mainboard/cavium/*/Kconfig"
+
+config MAINBOARD_VENDOR
+ string "Mainboard Vendor"
+ default "Cavium"
+
+endif # VENDOR_CAVIUM
diff --git a/src/mainboard/cavium/Kconfig.name b/src/mainboard/cavium/Kconfig.name
new file mode 100644
index 0000000000..e1d0b64d4d
--- /dev/null
+++ b/src/mainboard/cavium/Kconfig.name
@@ -0,0 +1,2 @@
+config VENDOR_CAVIUM
+ bool "Cavium"
diff --git a/src/mainboard/cavium/cn8100_sff_evb/Kconfig b/src/mainboard/cavium/cn8100_sff_evb/Kconfig
new file mode 100644
index 0000000000..c311b1dbd8
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/Kconfig
@@ -0,0 +1,68 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2018 Facebook, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+if BOARD_CAVIUM_CN8100_SFF_EVB
+
+config BOARD_SPECIFIC_OPTIONS
+ def_bool y
+ select BOARD_ROMSIZE_KB_16384
+ select COMMON_CBFS_SPI_WRAPPER
+ select RTC
+ select SOC_CAVIUM_CN81XX
+ select SPI_FLASH
+ select SPI_FLASH_STMICRO
+
+config MAINBOARD_DIR
+ string
+ default "cavium/cn8100_sff_evb"
+
+config MAINBOARD_VENDOR
+ string
+ default "Cavium"
+
+config DRAM_SIZE_MB
+ int
+ default 8192
+
+config BOOT_DEVICE_SPI_FLASH_BUS
+ int
+ default 0
+
+config CONSOLE_SERIAL_UART_ADDRESS
+ hex
+ depends on DRIVERS_UART
+ default 0x87E028000000
+
+config UART_FOR_CONSOLE
+ int
+ depends on DRIVERS_UART
+ default 0
+
+config FMDFILE
+ string
+ default "src/mainboard/$(CONFIG_MAINBOARD_DIR)/board.fmd"
+
+##########################################################
+#### Update below when adding a new derivative board. ####
+##########################################################
+config DEVICETREE
+ string
+ default "devicetree.cb"
+
+config MAINBOARD_PART_NUMBER
+ string
+ default "CN8100_SFF_EVB"
+
+endif
diff --git a/src/mainboard/cavium/cn8100_sff_evb/Kconfig.name b/src/mainboard/cavium/cn8100_sff_evb/Kconfig.name
new file mode 100644
index 0000000000..988be4a8f9
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/Kconfig.name
@@ -0,0 +1,2 @@
+config BOARD_CAVIUM_CN8100_SFF_EVB
+ bool "CN8100 SFF EVB"
diff --git a/src/mainboard/cavium/cn8100_sff_evb/Makefile.inc b/src/mainboard/cavium/cn8100_sff_evb/Makefile.inc
new file mode 100644
index 0000000000..97a03c4d28
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/Makefile.inc
@@ -0,0 +1,27 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2017-present Facebook, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+bootblock-y += bootblock.c
+bootblock-y += memlayout.ld
+
+romstage-y += memlayout.ld
+romstage-y += romstage.c
+romstage-y += bdk_devicetree.c
+
+ramstage-y += mainboard.c
+ramstage-y += memlayout.ld
+ramstage-y += bdk_devicetree.c
+
+verstage-y += memlayout.ld
diff --git a/src/mainboard/cavium/cn8100_sff_evb/bdk_devicetree.c b/src/mainboard/cavium/cn8100_sff_evb/bdk_devicetree.c
new file mode 100644
index 0000000000..7bc04ce01e
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/bdk_devicetree.c
@@ -0,0 +1,125 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+// This file is automatically generated.
+// DO NOT EDIT BY HAND.
+
+#include <bdk-devicetree.h>
+
+const struct bdk_devicetree_key_value devtree[] = {
+{"DDR-CONFIG-DQX-CTL", "0x4"},
+{"DDR-CONFIG-WODT-MASK.RANKS2.DIMMS2", "0xc0c0303"},
+{"DDR-CONFIG-WODT-MASK.RANKS4.DIMMS1", "0x1030203"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS1.RANK0", "0x4"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK0", "0x4"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK2", "0x4"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK0", "0x2"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK1", "0x2"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS2", "0x2"},
+{"DDR-CONFIG-MODE1-RTT-WR.RANKS4", "0x1"},
+{"DDR-CONFIG-MODE1-DIC.RANKS4.DIMMS1", "0x1"},
+{"DDR-CONFIG-MODE1-RTT-NOM.RANKS2.DIMMS2", "0x2"},
+{"DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK0", "0x4"},
+{"DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK2", "0x4"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS1.RANK0", "0x1"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK0", "0x5"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK2", "0x5"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK0", "0x2"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK1", "0x2"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS2", "0x1"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK0", "0x6"},
+{"DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK1", "0x6"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS1.RANK0", "0x22"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK0", "0x1f"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK2", "0x1f"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK0", "0x19"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK1", "0x19"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS2", "0x19"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK0", "0x1f"},
+{"DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK1", "0x1f"},
+{"DDR-CONFIG-RODT-CTL.RANKS1.DIMMS1", "0x7"},
+{"DDR-CONFIG-RODT-CTL.RANKS1.DIMMS2", "0x3"},
+{"DDR-CONFIG-RODT-CTL.RANKS2.DIMMS1", "0x3"},
+{"DDR-CONFIG-RODT-CTL.RANKS2.DIMMS2", "0x7"},
+{"DDR-CONFIG-RODT-CTL.RANKS4.DIMMS1", "0x7"},
+{"DDR-CONFIG-RODT-MASK.RANKS2.DIMMS2", "0x4080102"},
+{"DDR-CONFIG-RODT-MASK.RANKS4.DIMMS1", "0x1010202"},
+{"DDR-CONFIG-CUSTOM-MIN-RTT-NOM-IDX", "0x1"},
+{"DDR-CONFIG-CUSTOM-MAX-RTT-NOM-IDX", "0x7"},
+{"DDR-CONFIG-CUSTOM-MIN-RODT-CTL", "0x1"},
+{"DDR-CONFIG-CUSTOM-MAX-RODT-CTL", "0x7"},
+{"DDR-CONFIG-CUSTOM-CK-CTL", "0x4"},
+{"DDR-CONFIG-CUSTOM-CMD-CTL", "0x4"},
+{"DDR-CONFIG-CUSTOM-CTL-CTL", "0x4"},
+{"DDR-CONFIG-CUSTOM-OFFSET-EN", "0x1"},
+{"DDR-CONFIG-CUSTOM-OFFSET", "0x2"},
+{"DDR-CONFIG-CUSTOM-DDR2T", "0x1"},
+{"DDR-CONFIG-CUSTOM-MAXIMUM-ADJACENT-RLEVEL-DELAY-INCREMENT", "0x2"},
+{"DDR-CONFIG-CUSTOM-FPRCH2", "0x2"},
+{"PHY-ADDRESS.N0.BGX0.P0", "0xff000010"},
+{"PHY-ADDRESS.N0.BGX0.P1", "0xff000011"},
+{"PHY-ADDRESS.N0.BGX0.P2", "0xff000012"},
+{"PHY-ADDRESS.N0.BGX0.P3", "0xff000013"},
+{"PHY-ADDRESS.N0.BGX1.P0", "0xff002014"},
+{"PHY-ADDRESS.N0.BGX1.P1", "0xff002014"},
+{"PHY-ADDRESS.N0.BGX2.P0", "0xff000000"},
+{"BGX-ENABLE.N0.BGX0.P0", "1"},
+{"BGX-ENABLE.N0.BGX0.P1", "1"},
+{"BGX-ENABLE.N0.BGX0.P2", "1"},
+{"BGX-ENABLE.N0.BGX0.P3", "1"},
+{"BGX-ENABLE.N0.BGX1.P0", "1"},
+{"BGX-ENABLE.N0.BGX1.P1", "1"},
+{"BGX-ENABLE.N0.BGX2.P0", "1"},
+{"BDK-NUM-PACKET-BUFFERS", "0x1000"},
+{"BDK-PACKET-BUFFER-SIZE", "0x400"},
+{"BDK-SHOW-LINK-STATUS", "1"},
+{"BDK-COREMASK", "0"},
+{"MULTI-NODE", "0"},
+{"QLM-AUTO-CONFIG", "0"},
+{"QLM-DIP-AUTO-CONFIG", "1"},
+{"DDR-SPEED.N0", "1333"},
+{"DDR-CONFIG-SPD-ADDR.DIMM0.LMC0", "0x1050"},
+{"USB-PWR-GPIO.N0.PORT0", "12"},
+{"USB-PWR-GPIO-POLARITY.N0.PORT0", "0"},
+{"USB-REFCLK-SRC.N0.PORT0", "0"},
+{"GPIO-PIN-SELECT-GPIO15", "0x24f"},
+{"GPIO-PIN-SELECT-GPIO16", "0x24e"},
+{"GPIO-PIN-SELECT-GPIO17", "0x24b"},
+{"GPIO-PIN-SELECT-GPIO18", "0x247"},
+{"GPIO-PIN-SELECT-GPIO19", "0x24d"},
+{"GPIO-PIN-SELECT-GPIO20", "0x24c"},
+{"GPIO-PIN-SELECT-GPIO37", "0x24a"},
+{"GPIO-PIN-SELECT-GPIO38", "0x246"},
+{"GPIO-PIN-SELECT-GPIO7", "0xe1"},
+{"GPIO-PIN-SELECT-GPIO24", "0xeb"},
+{"GPIO-PIN-SELECT-GPIO27", "0xed"},
+{"GPIO-PIN-SELECT-GPIO28", "0xe3"},
+{"GPIO-PIN-SELECT-GPIO29", "0xe0"},
+{"GPIO-PIN-SELECT-GPIO30", "0xe2"},
+{"GPIO-PIN-SELECT-GPIO40", "0x112"},
+{"GPIO-PIN-SELECT-GPIO41", "0x113"},
+{"GPIO-PIN-SELECT-GPIO42", "0x114"},
+{"GPIO-PIN-SELECT-GPIO43", "0x115"},
+{"GPIO-PIN-SELECT-GPIO44", "0x116"},
+{"GPIO-PIN-SELECT-GPIO45", "0x117"},
+{"GPIO-PIN-SELECT-GPIO46", "0x118"},
+{"GPIO-PIN-SELECT-GPIO47", "0x119"},
+{"GPIO-POLARITY-GPIO7", "1"},
+{"GPIO-POLARITY-GPIO27", "1"},
+{"GPIO-POLARITY-GPIO28", "1"},
+{"GPIO-POLARITY-GPIO30", "1"},
+{0, 0},
+};
diff --git a/src/mainboard/cavium/cn8100_sff_evb/board.fmd b/src/mainboard/cavium/cn8100_sff_evb/board.fmd
new file mode 100644
index 0000000000..19987274ff
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/board.fmd
@@ -0,0 +1,24 @@
+FLASH@0x0 8M {
+ WP_RO@0x0 0x400000 {
+ RO_SECTION@0x0 0x200000 {
+ # bootblock includes trusted/non-trusted CLIB, CSIB,
+ # and BL1FWs packaged in
+ # src/soc/cavium/common/Makefile.inc.
+ BOOTBLOCK@0x10000 0x70000
+ FMAP@0x90000 0x1000
+ COREBOOT(CBFS)@0x100000 0x100000
+ }
+ }
+ RW_SECTION_A@0x400000 0xe8000 {
+ VBLOCK_A@0x0 0x2000
+ FW_MAIN_A(CBFS)@0x2000 0xe5f00
+ RW_FWID_A@0xe7f00 0x100
+ }
+ RW_UNUSED@0x4e8000 0x8000
+ RW_ELOG@0x5d8000 0x1000
+ RW_SHARED@0x5e0000 0x10000 {
+ SHARED_DATA@0x0 0x10000
+ }
+ RW_NVRAM@0x5f0000 0x10000
+ CONSOLE@0x700000 0x100000
+}
diff --git a/src/mainboard/cavium/cn8100_sff_evb/board_info.txt b/src/mainboard/cavium/cn8100_sff_evb/board_info.txt
new file mode 100644
index 0000000000..98a6c46b7f
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/board_info.txt
@@ -0,0 +1,6 @@
+Vendor name: Cavium
+Board name: CN81XX SFF EVB
+Category: eval
+ROM protocol: SPI
+ROM socketed: n
+Flashrom support: n
diff --git a/src/mainboard/cavium/cn8100_sff_evb/bootblock.c b/src/mainboard/cavium/cn8100_sff_evb/bootblock.c
new file mode 100644
index 0000000000..36332cc6e3
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/bootblock.c
@@ -0,0 +1,46 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <bootblock_common.h>
+#include <soc/soc.h>
+#include <soc/spi.h>
+#include <soc/uart.h>
+
+void bootblock_mainboard_early_init(void)
+{
+ if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE)) {
+ if (!uart_is_enabled(0))
+ uart_setup(0, CONFIG_TTYS0_BAUD);
+ if (!uart_is_enabled(1))
+ uart_setup(0, CONFIG_TTYS0_BAUD);
+ }
+}
+
+static void configure_spi_flash(void)
+{
+ /* FIXME: Only tested on EM100 Pro */
+ spi_init_custom(0, // bus
+ 25000000, // speed Hz
+ 0, // idle low disabled
+ 0, // zero idle cycles between transfers
+ 0, // MSB first
+ 0, // Chip select 0
+ 1); // assert is high
+}
+
+void bootblock_mainboard_init(void)
+{
+ configure_spi_flash();
+}
diff --git a/src/mainboard/cavium/cn8100_sff_evb/cn81xx-linux.dtsi b/src/mainboard/cavium/cn8100_sff_evb/cn81xx-linux.dtsi
new file mode 100644
index 0000000000..d82b5ac05e
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/cn81xx-linux.dtsi
@@ -0,0 +1,496 @@
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2016, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ model = "Cavium ThunderX CN81XX board";
+ compatible = "cavium,thunder-81xx";
+ interrupt-parent = <&gic0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "psci";
+ /* socket 0 */
+ numa-node-id = <0>;
+ next-level-cache = <&thunderx_L2_0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ next-level-cache = <&thunderx_L2_0>;
+ };
+ CPU2: cpu@2 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x002>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ next-level-cache = <&thunderx_L2_0>;
+ };
+ CPU3: cpu@3 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x003>;
+ enable-method = "psci";
+ numa-node-id = <0>;
+ next-level-cache = <&thunderx_L2_0>;
+ };
+ };
+
+ thunderx_L2_0: l2-cache0 {
+ compatible = "cache";
+ numa-node-id = <0>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 4>,
+ <1 14 4>,
+ <1 11 4>,
+ <1 10 4>;
+ };
+
+ pmu {
+ compatible = "cavium,thunder-pmu", "arm,armv8-pmuv3";
+ interrupts = <1 7 4>;
+ };
+
+ mmc_supply_3v3: mmc_supply_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "mmc_supply_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio_6_0 8 0>;
+ enable-active-high;
+ };
+
+ gic0: interrupt-controller@801000000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #redistributor-regions = <1>;
+ ranges;
+ interrupt-controller;
+ reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+ <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+ interrupts = <1 9 4>;
+
+ its: gic-its@801000020000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x8010 0x20000 0x0 0x200000>;
+ msi-controller;
+ numa-node-id = <0>;
+ };
+ };
+
+ soc@0 {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ numa-node-id = <0>;
+
+ refclkuaa: refclkuaa {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <116640000>;
+ clock-output-names = "refclkuaa";
+ };
+
+ sclk: sclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <800000000>;
+ clock-output-names = "sclk";
+ };
+
+ uaa0: serial@87e028000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x28000000 0x0 0x1000>;
+ interrupts = <0 5 4>;
+ clocks = <&refclkuaa>;
+ clock-names = "apb_pclk";
+ skip-init;
+ };
+
+ uaa1: serial@87e029000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x29000000 0x0 0x1000>;
+ interrupts = <0 6 4>;
+ clocks = <&refclkuaa>;
+ clock-names = "apb_pclk";
+ skip-init;
+ };
+
+ uaa2: serial@87e02a000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x2a000000 0x0 0x1000>;
+ interrupts = <0 7 4>;
+ clocks = <&refclkuaa>;
+ clock-names = "apb_pclk";
+ skip-init;
+ };
+
+ uaa3: serial@87e02b000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x2b000000 0x0 0x1000>;
+ interrupts = <0 8 4>;
+ clocks = <&refclkuaa>;
+ clock-names = "apb_pclk";
+ skip-init;
+ };
+
+ watch-dog@8440000a0000 {
+ compatible = "arm,sbsa-gwdt";
+ reg = <0x8440 0xa0000 0x0 0x1000>, <0x8440 0xb0000 0x0 0x1000>;
+ interrupts = <0 9 4>;
+ };
+
+ pbus0: nor@0 {
+ compatible = "cfi-flash";
+ reg = <0x8000 0x0 0x0 0x800000>;
+ device-width = <1>;
+ bank-width = <1>;
+ clocks = <&sclk>;
+ };
+
+ smmu0@830000000000 {
+ compatible = "cavium,smmu-v2";
+ reg = <0x8300 0x0 0x0 0x2000000>;
+ #global-interrupts = <1>;
+ interrupts = <0 68 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>,
+ <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>, <0 69 4>;
+
+ mmu-masters = <&ecam0 0x100>,
+ <&pem0 0x200>,
+ <&pem1 0x300>,
+ <&pem2 0x400>;
+
+ };
+
+ ecam0: pci@848000000000 {
+ compatible = "pci-host-ecam-generic";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0 0x10000>;
+ bus-range = <0 31>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ u-boot,dm-pre-reloc;
+ dma-coherent;
+ reg = <0x8480 0x00000000 0 0x02000000>; /* Configuration space */
+ ranges = <0x03000000 0x8010 0x00000000 0x8010 0x00000000 0x080 0x00000000>, /* mem ranges */
+ <0x03000000 0x8100 0x00000000 0x8100 0x00000000 0x80 0x00000000>, /* SATA */
+ <0x03000000 0x8680 0x00000000 0x8680 0x00000000 0x160 0x28000000>, /* UARTs */
+ <0x03000000 0x87e0 0x2c000000 0x87e0 0x2c000000 0x000 0x94000000>, /* PEMs */
+ <0x03000000 0x8400 0x00000000 0x8400 0x00000000 0x010 0x00000000>, /* RNM */
+ <0x03000000 0x8430 0x00000000 0x8430 0x00000000 0x02 0x00000000>, /* NIC0*/
+ <0x03000000 0x87e0 0xc6000000 0x87e0 0xc6000000 0x01f 0x3a000000>;
+
+ mrml_bridge: mrml-bridge0@1,0 {
+ compatible = "pci-bridge", "cavium,thunder-8890-mrml-bridge";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x03000000 0x87e0 0x00000000 0x03000000 0x87e0 0x00000000 0x10 0x00000000>;
+ reg = <0x0800 0 0 0 0>; /* DEVFN = 0x08 (1:0) */
+ device_type = "pci";
+ u-boot,dm-pre-reloc;
+
+ mdio-nexus@1,3 {
+ compatible = "cavium,thunder-8890-mdio-nexus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0b00 0 0 0 0>; /* DEVFN = 0x0b (1:3) */
+ assigned-addresses = <0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+ ranges = <0x87e0 0x05000000 0x03000000 0x87e0 0x05000000 0x0 0x800000>;
+ mdio0@87e005003800 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003800 0x0 0x30>;
+ };
+ mdio1@87e005003880 {
+ compatible = "cavium,thunder-8890-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x87e0 0x05003880 0x0 0x30>;
+ };
+ };
+
+ mmc_1_4: mmc@1,4 {
+ compatible = "cavium,thunder-8890-mmc";
+ reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sclk>;
+ };
+
+ i2c_9_0: i2c@9,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8890-twsi";
+ reg = <0x4800 0 0 0 0>; /* DEVFN = 0x48 (9:0) */
+ clock-frequency = <100000>;
+ clocks = <&sclk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ i2c_9_1: i2c@9,1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8890-twsi";
+ reg = <0x4900 0 0 0 0>; /* DEVFN = 0x49 (9:1) */
+ clock-frequency = <100000>;
+ clocks = <&sclk>;
+ u-boot,dm-pre-reloc;
+ };
+
+ rgx0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8890-bgx";
+ reg = <0x9000 0 0 0 0>; /* DEVFN = 0x90 (16:1) */
+ };
+ bgx0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8890-bgx";
+ reg = <0x8000 0 0 0 0>; /* DEVFN = 0x80 (16:0) */
+ };
+ bgx1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8890-bgx";
+ reg = <0x8100 0 0 0 0>; /* DEVFN = 0x81 (16:1) */
+ };
+ };
+
+ spi_7_0: spi@7,0 {
+ compatible = "cavium,thunder-8190-spi";
+ reg = <0x3800 0x0 0x0 0x0 0x0>; /* DEVFN = 0x38 (7:0) */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sclk>;
+ };
+
+ gpio_6_0: gpio0@6,0 {
+ #gpio-cells = <2>;
+ compatible = "cavium,thunder-8890-gpio";
+ gpio-controller;
+ reg = <0x3000 0 0 0 0>; /* DEVFN = 0x30 (6:0) */
+ u-boot,dm-pre-reloc;
+ };
+
+ nfc: nand@b,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,cn8130-nand";
+ reg = <0x5800 0 0 0 0>; /* DEVFN = 0x58 (b:0) */
+ clocks = <&sclk>;
+ };
+ };
+
+ pem0: pci@87e0c0000000 {
+
+ /* "cavium,pci-host-thunder-pem" implies that
+ the first bus in bus-range has config access
+ via the "PEM space", subsequent buses have
+ config assess via the "Configuration space".
+ The "mem64 PEM" range is used to map the PEM
+ BAR0, which is used by the AER and PME MSI-X
+ sources. UEFI and Linux must assign the same
+ bus number to each device, otherwise Linux
+ enumeration gets confused. Because UEFI
+ skips the PEM bus and its PCIe-RC bridge it
+ uses a numbering that starts 1 bus higher.
+ */
+
+ compatible = "cavium,pci-host-thunder-pem";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0 0x10000>;
+ bus-range = <0x1f 0x57>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ dma-coherent;
+ reg = <0x8800 0x1f000000 0x0 0x39000000>, /* Configuration space */
+ <0x87e0 0xc0000000 0x0 0x01000000>; /* PEM space */
+ ranges = <0x01000000 0x00 0x00000000 0x8830 0x00000000 0x00 0x00010000>, /* I/O */
+ <0x03000000 0x00 0x10000000 0x8810 0x10000000 0x0f 0xf0000000>, /* mem64 */
+ <0x43000000 0x10 0x00000000 0x8820 0x00000000 0x10 0x00000000>, /* mem64-pref */
+ <0x03000000 0x87e0 0xc0000000 0x87e0 0xc0000000 0x00 0x01000000>; /* mem64 PEM */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic0 0 0 0 16 4>, /* INTA */
+ <0 0 0 2 &gic0 0 0 0 17 4>, /* INTB */
+ <0 0 0 3 &gic0 0 0 0 18 4>, /* INTC */
+ <0 0 0 4 &gic0 0 0 0 19 4>; /* INTD */
+ };
+
+ pem1: pci@87e0c1000000 {
+ compatible = "cavium,pci-host-thunder-pem";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0 0x10000>;
+ bus-range = <0x57 0x8f>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ dma-coherent;
+ reg = <0x8840 0x57000000 0x0 0x39000000>, /* Configuration space */
+ <0x87e0 0xc1000000 0x0 0x01000000>; /* PEM space */
+ ranges = <0x01000000 0x00 0x00010000 0x8870 0x00010000 0x00 0x00010000>, /* I/O */
+ <0x03000000 0x00 0x10000000 0x8850 0x10000000 0x0f 0xf0000000>, /* mem64 */
+ <0x43000000 0x10 0x00000000 0x8860 0x00000000 0x10 0x00000000>, /* mem64-pref */
+ <0x03000000 0x87e0 0xc1000000 0x87e0 0xc1000000 0x00 0x01000000>; /* mem64 PEM */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic0 0 0 0 20 4>, /* INTA */
+ <0 0 0 2 &gic0 0 0 0 21 4>, /* INTB */
+ <0 0 0 3 &gic0 0 0 0 22 4>, /* INTC */
+ <0 0 0 4 &gic0 0 0 0 23 4>; /* INTD */
+ };
+
+ pem2: pci@87e0c2000000 {
+ compatible = "cavium,pci-host-thunder-pem";
+ device_type = "pci";
+ msi-parent = <&its>;
+ msi-map = <0 &its 0 0x10000>;
+ bus-range = <0x8f 0xc7>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ #stream-id-cells = <1>;
+ dma-coherent;
+ reg = <0x8880 0x8f000000 0x0 0x39000000>, /* Configuration space */
+ <0x87e0 0xc2000000 0x0 0x01000000>; /* PEM space */
+ ranges = <0x01000000 0x00 0x00020000 0x88b0 0x00020000 0x00 0x00010000>, /* I/O */
+ <0x03000000 0x00 0x10000000 0x8890 0x10000000 0x0f 0xf0000000>, /* mem64 */
+ <0x43000000 0x10 0x00000000 0x88a0 0x00000000 0x10 0x00000000>, /* mem64-pref */
+ <0x03000000 0x87e0 0xc2000000 0x87e0 0xc2000000 0x00 0x01000000>; /* mem64 PEM */
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &gic0 0 0 0 24 4>, /* INTA */
+ <0 0 0 2 &gic0 0 0 0 25 4>, /* INTB */
+ <0 0 0 3 &gic0 0 0 0 26 4>, /* INTC */
+ <0 0 0 4 &gic0 0 0 0 27 4>; /* INTD */
+ };
+
+ tdm: tdm@d,0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "cavium,thunder-8190-tdm";
+ reg = <0x6800 0 0 0>; /* DEVFN = 0x68 (d:0) */
+ clocks = <&sclk>;
+ };
+ };
+
+ aliases {
+ serial0 = &uaa0;
+ serial1 = &uaa1;
+ serial2 = &uaa2;
+ serial3 = &uaa3;
+ i2c0 = &i2c_9_0;
+ i2c1 = &i2c_9_1;
+ spi0 = &spi_7_0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x01400000 0x0 0x7EC00000>;
+ /* socket 0 */
+ numa-node-id = <0>;
+ };
+};
diff --git a/src/mainboard/cavium/cn8100_sff_evb/ddr4-common.dtsi b/src/mainboard/cavium/cn8100_sff_evb/ddr4-common.dtsi
new file mode 100644
index 0000000000..72ff649014
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/ddr4-common.dtsi
@@ -0,0 +1,802 @@
+/***********************license start***********************************
+* Copyright (c) 2003-2016 Cavium Inc. (support@cavium.com). All rights
+* reserved.
+*
+*
+* Redistribution and use in source and binary forms, with or without
+* modification, are permitted provided that the following conditions are
+* met:
+*
+* * Redistributions of source code must retain the above copyright
+* notice, this list of conditions and the following disclaimer.
+*
+* * Redistributions in binary form must reproduce the above
+* copyright notice, this list of conditions and the following
+* disclaimer in the documentation and/or other materials provided
+* with the distribution.
+*
+* * Neither the name of Cavium Inc. nor the names of
+* its contributors may be used to endorse or promote products
+* derived from this software without specific prior written
+* permission.
+*
+* This Software, including technical data, may be subject to U.S. export
+* control laws, including the U.S. Export Administration Act and its
+* associated regulations, and may be subject to export or import
+* regulations in other countries.
+*
+* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
+* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
+* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT
+* TO THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY
+* REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT
+* DEFECTS, AND CAVIUM SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES
+* OF TITLE, MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR
+* PURPOSE, LACK OF VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT,
+* QUIET POSSESSION OR CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK
+* ARISING OUT OF USE OR PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
+***********************license end**************************************/
+/ {
+cavium,bdk {
+ /* Speed grade to use for DRAM in MT/s. Hardware may adjust this value
+ slightly to improve DRAM stability, so scope measurements may not
+ exactly match the frequency with MT/s. The Cavium supported speed
+ grades are:
+ 0 (auto-set from SPD contents)
+ 666 MT/s (DDR3 only)
+ 800 MT/s (DDR3 only)
+ 1066 MT/s (DDR3 only)
+ 1333 MT/s (DDR3 only)
+ 1600 MT/s
+ 1866 MT/s
+ 2133 MT/s (DDR4 only)
+ Parameters:
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-SPEED.N%d = "0";
+
+ /* Set to use a an alternate reference clock for DRAM than the usual
+ 50Mhz reference. The value of here specifies the frequency of the
+ alternate clock in Mhz. Currently the only supported reference
+ clock frequencies are 50Mhz and 100Mhz.
+ Parameters:
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-ALT-REFCLK.N%d = "0";
+
+ /* TWSI address of the DIMM SPD. The encoding of this address is
+ : [15:12]: TWSI bus the DIMM is connected to.
+ [11:7]: Reserved, set to zero.
+ [6:0]: TWSI address for the DIMM.
+ A value of zero means the DIMMs are not accessible. Hard coded
+ values will be read from DDR-CONFIG-SPD-DATA.Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-SPD-ADDR.DIMM%d.LMC%d.N%d = "0";
+ // Note: The SPD addresses are not specified here so boards don't
+ // inherit a default. The default causes trouble with UEFI when it
+ // builds SMBIOS tables.
+
+ /* DIMM SPD data to be used if memory doesn't support the standard
+ TWSI access to DIMM SPDs. The format of this is a binary blob
+ stored in the device tree. An example would be:
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-SPD-DATA.DIMM%d.LMC%d.N%d = [];
+
+ /* Drive strength control for DDR_DQ* / DDR_DQS_*_P/N drivers.
+ 0x1 = 24 ohm.
+ 0x2 = 26.67 ohm.
+ 0x3 = 30 ohm.
+ 0x4 = 34.3 ohm.
+ 0x5 = 40 ohm.
+ 0x6 = 48 ohm.
+ 0x7 = 60 ohm.
+ _ else = Reserved.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-DQX-CTL.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+ DDR-CONFIG-DQX-CTL = "0x4";
+
+ /* LMC Write OnDieTermination Mask Register
+ System designers may desire to terminate DQ/DQS lines for
+ higher-frequency DDR operations, especially on a multirank system.
+ DDR3 DQ/DQS I/Os have built-in termination resistors that can be
+ turned on or off by the controller, after meeting TAOND and TAOF
+ timing requirements. Each rank has its own ODT pin that fans out
+ to all of the memory parts in that DIMM. System designers may
+ prefer different combinations of ODT ONs for write operations into
+ different ranks. CNXXXX supports full programmability by way of
+ the mask register below. Each rank position has its own 8-bit
+ programmable field. When the controller does a write to that rank,
+ it sets the 4 ODT pins to the mask pins below. For example, when
+ doing a write into Rank0, a system designer may desire to terminate
+ the lines with the resistor on DIMM0/Rank1. The mask WODT_D0_R0
+ would then be {00000010}.
+ CNXXXX drives the appropriate mask values on the ODT pins by
+ default. If this feature is not required, write 0x0 in this
+ register. When a given RANK is selected, the WODT mask for that
+ RANK is used.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-WODT-MASK.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+ DDR-CONFIG-WODT-MASK.RANKS2.DIMMS2 = "0xc0c0303";
+ DDR-CONFIG-WODT-MASK.RANKS4.DIMMS1 = "0x1030203";
+
+ /* Partial array self-refresh per rank. LMC writes this value to
+ MR2[PASR] in the rank (i.e. DIMM0_CS0) DDR3 parts when selected
+ during power-up/init, write-leveling, and, if
+ LMC()_CONFIG[SREF_WITH_DLL] is set, self-refresh entry and exit
+ instruction sequences. See LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and
+ LMC()_CONFIG[RANKMASK] and LMC()_RESET_CTL[DDR3PWARM,DDR3PSOFT].
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-PASR.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ /* Auto self-refresh per rank. LMC writes this value to MR2[ASR] in
+ the rank (i.e. DIMM0_CS0) DDR3 parts when selected during
+ power-up/init, write-leveling, and, if LMC()_CONFIG[SREF_WITH_DLL]
+ is set, self-refresh entry and exit instruction sequences. See
+ LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and LMC()_CONFIG[RANKMASK] and
+ LMC()_RESET_CTL [DDR3PWARM,DDR3PSOFT].
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-ASR.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ /* Self-refresh temperature range per rank. LMC writes this value to
+ MR2[SRT] in the rank (i.e. DIMM0_CS0) DDR3 parts when selected
+ during power-up/init, write-leveling, and, if
+ LMC()_CONFIG[SREF_WITH_DLL] is set, self-refresh entry and exit
+ instruction sequences. See LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and
+ LMC()_CONFIG[RANKMASK] and LMC()_RESET_CTL[DDR3PWARM,DDR3PSOFT].
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-SRT.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ /* RTT_WR per rank. LMC writes this value to MR2[RTT_WR] in the rank
+ (i.e. DIMM0_CS0) DDR3 parts when selected during power-up/init,
+ write-leveling, and, if LMC()_CONFIG[SREF_WITH_DLL] is set,
+ self-refresh entry and exit instruction sequences. See
+ LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and LMC()_CONFIG[RANKMASK] and
+ LMC()_RESET_CTL[DDR3PWARM, DDR3PSOFT].
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-RTT-WR.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ //DDR-CONFIG-MODE1-RTT-WR.RANKS1 = "0x4";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS1.RANK0 = "0x4";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK0 = "0x4";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS1.DIMMS2.RANK2 = "0x4";
+
+ //DDR-CONFIG-MODE1-RTT-WR.RANKS2 = "0x2";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK0 = "0x2";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS1.RANK1 = "0x2";
+ DDR-CONFIG-MODE1-RTT-WR.RANKS2.DIMMS2 = "0x2";
+
+ DDR-CONFIG-MODE1-RTT-WR.RANKS4 = "0x1";
+
+ /* Output driver impedance control per rank. LMC writes this value
+ to MR1[D.I.C.] in the rank (i.e. DIMM0_CS0) DDR3 parts when
+ selected during power-up/init, write-leveling, and, if
+ LMC()_CONFIG[SREF_WITH_DLL] is set, self-refresh entry and exit
+ instruction sequences. See LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and
+ LMC()_CONFIG[RANKMASK] and LMC()_RESET_CTL[DDR3PWARM,DDR3PSOFT].
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-DIC.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+ DDR-CONFIG-MODE1-DIC.RANKS4.DIMMS1 = "0x1";
+
+ /* RTT_NOM per rank. LMC writes this value to MR1[RTT_NOM] in the
+ rank (i.e. DIMM0_CS0) DDR3 parts when selected during
+ power-up/init, write-leveling, and, if LMC()_CONFIG[SREF_WITH_DLL]
+ is set, self-refresh entry and exit instruction sequences. See
+ LMC()_SEQ_CTL[SEQ_SEL,INIT_START] and LMC()_CONFIG[RANKMASK] and
+ LMC()_RESET_CTL[DDR3PWARM, DDR3PSOFT]. Per JEDEC DDR3
+ specifications, if RTT_NOM is used during write operations, only
+ values MR1[RTT_NOM] = 1 (RZQ/4), 2 (RZQ/2), or 3 (RZQ/6) are
+ allowed. Otherwise, values MR1[RTT_NOM] = 4 (RZQ/12) and 5 (RZQ/8)
+ are also allowed.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-RTT-NOM.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+ DDR-CONFIG-MODE1-RTT-NOM.RANKS2.DIMMS2 = "0x2";
+ DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK0 = "0x4";
+ DDR-CONFIG-MODE1-RTT-NOM.RANKS4.DIMMS1.RANK2 = "0x4";
+
+ /* Host Interface DQ/DQS Output Driver Impedance control for DIMM0's
+ Data Buffer. This is the default value used during Host Interface
+ Write Leveling in LRDIMM environment, i.e.,
+ LMC()_CONFIG[LRDIMM_ENA] = 1, LMC()_SEQ_CTL[SEQ_SEL] = 0x6.
+ 0x0 = RZQ/6 (40 ohm).
+ 0x1 = RZQ/7 (34 ohm).
+ 0x2 = RZQ/5 (48 ohm).
+ 0x3-0x7 = Reserved.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE1-DB-OUTPUT-IMPEDANCE.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+
+ /* RTT park value per rank.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE2-RTT-PARK.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ //DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS1 = "0x1";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS1.RANK0 = "0x1";
+
+ //DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2 = "0x5";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK0 = "0x5";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS1.DIMMS2.RANK2 = "0x5";
+
+ //DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1 = "0x2";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK0 = "0x2";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS1.RANK1 = "0x2";
+
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS2.DIMMS2 = "0x1";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK0 = "0x6";
+ DDR-CONFIG-MODE2-RTT-PARK.RANKS4.DIMMS1.RANK1 = "0x6";
+
+ /* VREF value per rank.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE2-VREF-VALUE.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ //DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS1 = "0x22";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS1.RANK0 = "0x22";
+
+ //DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2 = "0x1f";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK0 = "0x1f";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS1.DIMMS2.RANK2 = "0x1f";
+
+ //DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1 = "0x19";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK0 = "0x19";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS1.RANK1 = "0x19";
+
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS2.DIMMS2 = "0x19";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK0 = "0x1f";
+ DDR-CONFIG-MODE2-VREF-VALUE.RANKS4.DIMMS1.RANK1 = "0x1f";
+
+ /* VREF range per rank.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ RANK#: Parameter can be different for each rank of a DIMM. This
+ specifies which rank the value is for. Rank must be
+ 0-3. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE2-VREF-RANGE.RANKS%d.DIMMS%d.RANK%d.LMC%d.N%d = "0";
+
+ /* Vref training mode enable, used for all ranks.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-MODE2-VREFDQ-TRAIN-EN.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+
+ /* RODT NCTL impedance control bits. This field controls ODT values
+ during a memory read.
+ 0x0 = No ODT.
+ 0x1 = 20 ohm.
+ 0x2 = 30 ohm.
+ 0x3 = 40 ohm.
+ 0x4 = 60 ohm.
+ 0x5 = 120 ohm.
+ _ else = Reserved.
+ In DDR4 mode:
+ 0x0 = No ODT.
+ 0x1 = 40 ohm.
+ 0x2 = 60 ohm.
+ 0x3 = 80 ohm.
+ 0x4 = 120 ohm.
+ 0x5 = 240 ohm.
+ 0x6 = 34 ohm.
+ 0x7 = 48 ohm.
+ _ else = Reserved.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-RODT-CTL.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+ DDR-CONFIG-RODT-CTL.RANKS1.DIMMS1 = "0x7";
+ DDR-CONFIG-RODT-CTL.RANKS1.DIMMS2 = "0x3";
+ DDR-CONFIG-RODT-CTL.RANKS2.DIMMS1 = "0x3";
+ DDR-CONFIG-RODT-CTL.RANKS2.DIMMS2 = "0x7";
+ DDR-CONFIG-RODT-CTL.RANKS4.DIMMS1 = "0x7";
+
+ /* LMC Read OnDieTermination Mask Register
+ System designers may desire to terminate DQ/DQS lines for higher
+ frequency DDR operations, especially on a multirank system. DDR3
+ DQ/DQS I/Os have built-in termination resistors that can be turned
+ on or off by the controller, after meeting TAOND and TAOF timing
+ requirements.
+ Each rank has its own ODT pin that fans out to all the memory
+ parts in that DIMM. System designers may prefer different
+ combinations of ODT ONs for read operations into different ranks.
+ CNXXXX supports full programmability by way of the mask register
+ below. Each rank position has its own 4-bit programmable field.
+ When the controller does a read to that rank, it sets the 4 ODT
+ pins to the MASK pins below. For example, when doing a read from
+ Rank0, a system designer may desire to terminate the lines with
+ the resistor on DIMM0/Rank1. The mask RODT_D0_R0 would then be {0010}.
+ CNXXXX drives the appropriate mask values on the ODT pins by
+ default. If this feature is not required, write 0x0 in this
+ register. Note that, as per the JEDEC DDR3 specifications, the ODT
+ pin for the rank that is being read should always be 0x0. When a
+ given RANK is selected, the RODT mask for that rank is used.
+ Parameters:
+ RANKS#: Specifies that this parameter only applies to DIMMs
+ with the supplied number of ranks. Support ranks is 1, 2,
+ or 4. Optional.
+ DIMMS#: Specifies that this parameter only applies when the
+ DIMMs per memory controller matches. Support number of
+ DIMMs is 1 or 2. Optional.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-RODT-MASK.RANKS%d.DIMMS%d.LMC%d.N%d = "0";
+ DDR-CONFIG-RODT-MASK.RANKS2.DIMMS2 = "0x4080102";
+ DDR-CONFIG-RODT-MASK.RANKS4.DIMMS1 = "0x1010202";
+
+ /* 1=120ohms, 2=60ohms, 3=40ohms, 4=30ohms, 5=20ohms
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MIN-RTT-NOM-IDX.LMC%d.N%d = "1";
+ DDR-CONFIG-CUSTOM-MIN-RTT-NOM-IDX = "0x1";
+
+ /* 1=120ohms, 2=60ohms, 3=40ohms, 4=30ohms, 5=20ohms
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MAX-RTT-NOM-IDX.LMC%d.N%d = "5";
+ DDR-CONFIG-CUSTOM-MAX-RTT-NOM-IDX = "0x7";
+
+ /* 1=20ohms, 2=30ohms, 3=40ohms, 4=60ohms, 5=120ohms
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MIN-RODT-CTL.LMC%d.N%d = "1";
+ DDR-CONFIG-CUSTOM-MIN-RODT-CTL = "0x1";
+
+ /* 1=20ohms, 2=30ohms, 3=40ohms, 4=60ohms, 5=120ohms
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MAX-RODT-CTL.LMC%d.N%d = "5";
+ DDR-CONFIG-CUSTOM-MAX-RODT-CTL = "0x7";
+
+ /* Drive strength control for DDR_CK_X_P, DDR_DIMMX_CSX_L,
+ DDR_DIMMX_ODT_X drivers.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-CK-CTL.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-CK-CTL = "0x4";
+
+ /* Drive strength control for CMD/A/RESET_L/CKEX drivers.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-CMD-CTL.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-CMD-CTL = "0x4";
+
+ /* Drive strength control for ODT, etc. drivers.
+ In DDR3 mode:
+ 0x1 = 24 ohm.
+ 0x2 = 26.67 ohm.
+ 0x3 = 30 ohm.
+ 0x4 = 34.3 ohm.
+ 0x5 = 40 ohm.
+ 0x6 = 48 ohm.
+ 0x7 = 60 ohm.
+ else = Reserved.
+ In DDR4 mode:
+ 0x0 = Reserved.
+ 0x1 = Reserved.
+ 0x2 = 26 ohm.
+ 0x3 = 30 ohm.
+ 0x4 = 34 ohm.
+ 0x5 = 40 ohm.
+ 0x6 = 48 ohm.
+ else = Reserved.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-CTL-CTL.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-CTL-CTL = "0x4";
+
+ /* Minimum allowed CAS Latency
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MIN-CAS-LATENCY.LMC%d.N%d = "0";
+
+ /* When set, LMC attempts to select the read-leveling setting that is
+ LMC()_RLEVEL_CTL[OFFSET] settings earlier than the last passing
+ read-leveling setting in the largest contiguous sequence of
+ passing settings. When clear, or if the setting selected by
+ LMC()_RLEVEL_CTL[OFFSET] did not pass, LMC selects the middle
+ setting in the largest contiguous sequence of passing settings,
+ rounding earlier when necessary.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-OFFSET-EN.LMC%d.N%d = "1";
+ DDR-CONFIG-CUSTOM-OFFSET-EN = "0x1";
+
+ /* The offset used when LMC()_RLEVEL_CTL[OFFSET] is set.
+ Parameters:
+ %s: This setting can by specified by DRAM type (UDIMM or RDIMM)
+ Different settings can be used for each, or the type can be
+ omitted to use the same setting for both.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-OFFSET.%s.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-OFFSET = "0x2";
+
+ /* Enables software interpretation of per-byte read delays using the
+ measurements collected by the chip rather than completely relying
+ on the automatically to determine the delays. 1=software
+ computation is recommended since a more complete analysis is
+ implemented in software.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-RLEVEL-COMPUTE.LMC%d.N%d = "0";
+
+ /* Set to 2 unless instructed differently by Cavium.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-RLEVEL-COMP-OFFSET.%s.LMC%d.N%d = "2";
+
+ /* Turn on the DDR 2T mode. 2-cycle window for CMD and address. This
+ mode helps relieve setup time pressure on the address and command
+ bus. Please refer to Micron's tech note tn_47_01 titled DDR2-533
+ Memory Design Guide for Two DIMM Unbuffered Systems for physical
+ details.
+ Parameters:
+ %s: This setting can by specified by DRAM type (UDIMM or RDIMM)
+ Different settings can be used for each, or the type can be
+ omitted to use the same setting for both.
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-DDR2T.%s.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-DDR2T = "0x1";
+
+ /* As result of the flyby topology prescribed in the JEDEC
+ specifications the byte delays should maintain a consistent
+ increasing or decreasing trend across the bytes on standard DIMMs.
+ This setting can be used disable that check for unusual
+ circumstances where the check is not useful.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-DISABLE-SEQUENTIAL-DELAY-CHECK.LMC%d.N%d = "0";
+
+ /* An additional sequential delay check for the delays that result
+ from the flyby topology. This value specifies the maximum
+ difference between the delays of adjacent bytes. A value of 0
+ disables this check.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MAXIMUM-ADJACENT-RLEVEL-DELAY-INCREMENT.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-MAXIMUM-ADJACENT-RLEVEL-DELAY-INCREMENT = "0x2";
+
+ /* The parity input signal PAR_IN on each DIMM must be strapped high
+ or low on the board. This bit is programmed into
+ LMC0_DIMM_CTL[PARITY] and it must be set to match the board
+ strapping. This signal is typically strapped low.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-PARITY.LMC%d.N%d = "0";
+
+ /* Front Porch Enable: When set, the turn-off time for the default
+ DDR_DQ/DQS drivers is FPRCH2 CKs earlier.
+ 0 = 0 CKs
+ 1 = 1 CKs
+ 2 = 2 CKs
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-FPRCH2.LMC%d.N%d = "0";
+ DDR-CONFIG-CUSTOM-FPRCH2 = "0x2";
+
+ /* Enable 32-bit datapath mode. Set to 1 if only 32 DQ pins are
+ used.
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MODE32B.LMC%d.N%d = "0";
+
+ /* Use Measured VREF
+ Parameters:
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-MEASURED-VREF.LMC%d.N%d = "0";
+
+ /* Supply a custom DLL write offset
+ Parameters:
+ BYTE#: Byte lane to apply the parameter to (0-8).
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-DLL-WRITE-OFFSET.BYTE%d.LMC%d.N%d = "0";
+
+ /* Supply a custom DLL read offset
+ Parameters:
+ BYTE#: Byte lane to apply the parameter to (0-8).
+ LMC#: Parameter can be different for memory controller. This
+ specifies which LMC the value is for. LMC must be
+ 0-3. Optional.
+ N#: Parameter can be different for each node. This specifies
+ which node the value is for. Node must be 0-3. Optional. */
+ //DDR-CONFIG-CUSTOM-DLL-READ-OFFSET.BYTE%d.LMC%d.N%d = "0";
+
+ /* Choose the debug logging level used during DRAM initialization.
+ Zero disables debug logging. The possible debug levels are:
+ 0: Off, no logging
+ 1: Logging of DRAM initialization at a normal detail level
+ 2: Logging of DRAM initialization at FAE detail level
+ 3: Logging of DRAM initialization at TME detail level
+ 4: Logging of DRAM initialization at DEV detail level
+ 5: Logging of DRAM initialization at DEV2 detail level
+ 6: Logging of DRAM initialization at DEV3 detail level
+ 7: Logging of DRAM initialization at DEV4 detail level
+ Add in the following for special trace features.
+ 16: Trace specialized DRAM controller sequences.
+ 32: Trace every DRAM controller register write. */
+ //DDR-VERBOSE = "0";
+
+ /* Run a short DRAM test after DRAM is initialized as quick check
+ for functionality. This is normally not needed required. Boards
+ with poor DRAM power supplies may use this to detect failures
+ during boot. This should be used in combination with the watchdog
+ timer. */
+ //DDR-TEST-BOOT = "0";
+
+ /* The DRAM initialization code has the ability to toggle a GPIO to
+ signal when it is running. Boards may need to mux TWSI access
+ between a BMC and the SOC so the BMC can monitor DIMM temperatures
+ and health. This GPIO will be driven high when the SOC may read
+ from the SPDs on the DIMMs. When driven low, another device (BMC)
+ may takeover the TWSI connections to the DIMMS. The default value
+ (-1) disables this feature. */
+ //DDR-CONFIG-GPIO = "-1";
+
+ /* Scramble DRAM to prevent snooping. This options programs the DRAM
+ controller to scramble addresses and data with random values.
+ Supported values:
+ 0: No scrambling
+ 1: Always scramble
+ 2: Scramble only when using trusted boot (Default) */
+ //DDR-CONFIG-SCRAMBLE = "2";
+}; /* cavium,bdk */
+}; /* / */
diff --git a/src/mainboard/cavium/cn8100_sff_evb/devicetree.cb b/src/mainboard/cavium/cn8100_sff_evb/devicetree.cb
new file mode 100644
index 0000000000..cd495e1f54
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/devicetree.cb
@@ -0,0 +1,18 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2017-present Facebook, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+chip soc/cavium/cn81xx
+ device cpu_cluster 0 on end
+end
diff --git a/src/mainboard/cavium/cn8100_sff_evb/mainboard.c b/src/mainboard/cavium/cn8100_sff_evb/mainboard.c
new file mode 100644
index 0000000000..b6d4ad8a7c
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/mainboard.c
@@ -0,0 +1,216 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. (support@cavium.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <device/device.h>
+#include <libbdk-hal/bdk-config.h>
+#include <libbdk-hal/bdk-twsi.h>
+#include <soc/twsi.h>
+#include <soc/gpio.h>
+#include <delay.h>
+
+extern const struct bdk_devicetree_key_value devtree[];
+
+static void mainboard_init(struct device *dev)
+{
+ /* FIXME: stub */
+}
+
+static void mainboard_enable(struct device *dev)
+{
+ dev->ops->init = &mainboard_init;
+
+ bdk_config_set_fdt(devtree);
+
+ /*
+ * Adapted from Cavium's devicetree TWSI-WRITE:
+ * Init board-specific I2C hardware:
+ */
+ twsi_init(0, I2C_SPEED_STANDARD);
+
+ /* Initialize IO expander U6 to power-up defaults */
+ /* float all pins 0.0-0.7 */
+ bdk_twsix_write_ia(0,0,0x21,6,1,1,0xff);
+ /* float all pins 1.0-1.7 */
+ bdk_twsix_write_ia(0,0,0x21,7,1,1,0xff);
+ /* 0.x: all outputs low, but disabled */
+ bdk_twsix_write_ia(0,0,0x21,2,1,1,0x00);
+ /* 1.x: all outputs low, but disabled */
+ bdk_twsix_write_ia(0,0,0x21,3,1,1,0x00);
+ /* 0.x: no polarity inversion */
+ bdk_twsix_write_ia(0,0,0x21,4,1,1,0x00);
+ /* 1.x: no polarity inversion */
+ bdk_twsix_write_ia(0,0,0x21,5,1,1,0x00);
+ /* Initialize IO expander U89 to power-up defaults */
+ /* float all pins 0.0-0.7 */
+ bdk_twsix_write_ia(0,0,0x22,6,1,1,0xff);
+ /* float all pins 1.0-1.7 */
+ bdk_twsix_write_ia(0,0,0x22,7,1,1,0xff);
+ /* 0.x: all outputs low, but disabled */
+ bdk_twsix_write_ia(0,0,0x22,2,1,1,0x00);
+ /* 1.x: all outputs low, but disabled */
+ bdk_twsix_write_ia(0,0,0x22,3,1,1,0x00);
+ /* 0.x: no polarity inversion */
+ bdk_twsix_write_ia(0,0,0x22,4,1,1,0x00);
+ /* 1.x: no polarity inversion */
+ bdk_twsix_write_ia(0,0,0x22,5,1,1,0x00);
+ /* set outputs SLIC_RESET_L=0 and SPI_SEL=0 */
+ bdk_twsix_write_ia(0,0,0x21,6,1,1,0xee); /* 0.0 & 0.4 are outputs */
+
+ /* Select channel-0 in PCA9546A to enable SFI */
+ bdk_twsix_write_ia(0, 0, 0x70, 0, 1, 1, 0x7);
+ mdelay(10);
+ /* Configure I2C-GPIO expander I/O directions */
+ bdk_twsix_write_ia(0, 0, 0x22, 6, 1, 1, 0x07);
+ mdelay(10);
+ /* Configure I2C-GPIO expander I/O directions */
+ bdk_twsix_write_ia(0, 0, 0x22, 7, 1, 1, 0x38);
+ mdelay(10);
+ /* Turn on SFP+ Transmitters */
+ bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x0);
+ mdelay(10);
+ /* Set VSC7224 to I2C mode */
+ bdk_twsix_write_ia(0, 0, 0x22, 3, 1, 1, 0x0);
+ mdelay(10);
+ /* Assert VSC7224 reset*/
+ bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x80);
+ mdelay(50);
+ /* Deassert VSC7224 reset*/
+ bdk_twsix_write_ia(0, 0, 0x22, 2, 1, 1, 0x0);
+ mdelay(50);
+ /* Page select FSYNC0 (0x30) */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0030);
+ mdelay(10);
+ /* Set FSYNC0 for 10.3125Gbps See Table 3 */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x80, 2, 1, 0x2841);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x81, 2, 1, 0x0008);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x82, 2, 1, 0x7a00);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x83, 2, 1, 0x000f);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x84, 2, 1, 0x9c18);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x85, 2, 1, 0x0);
+ mdelay(10);
+
+ /* All channels Rx settings set equally */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0050);
+ mdelay(10);
+ /* Shrink EQ_BUFF */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x82, 2, 1, 0x0014);
+ mdelay(10);
+ /* Select min DFE Delay (DFE_DELAY) */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x90, 2, 1, 0x5585);
+ mdelay(10);
+ /* Set DFE 1-3 limit (DXMAX) = 32dec, AP Max limit = 127 decimal */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x92, 2, 1, 0x207f);
+ mdelay(10);
+ /* Set AP Min limit = 32 decimal */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x93, 2, 1, 0x2000);
+ mdelay(10);
+ /* Set DFE Averaging to the slowest (DFE_AVG) */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x94, 2, 1, 0x0031);
+ mdelay(10);
+ /* Set Inductor Bypass OD_IND_BYP = 0 & fastest Rise/Fall */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x9c, 2, 1, 0x0000);
+ mdelay(10);
+ /* Setting DFE Boost = none. Must set for rev C
+ * (if DFE in adapt mode) */
+ bdk_twsix_write_ia(0, 0, 0x14, 0xaa, 2, 1, 0x0888);
+ mdelay(10);
+ /* Setting EQ Min/Max = 8/72 */
+ bdk_twsix_write_ia(0, 0, 0x14, 0xa8, 2, 1, 0x2408);
+ mdelay(10);
+ /* Setting EQVGA = 96, when in EQVGA manual mode */
+ bdk_twsix_write_ia(0, 0, 0x14, 0xa9, 2, 1, 0x0060);
+ mdelay(10);
+ /* Setting SW_BFOCM, bits 15:14 to 01 */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x87, 2, 1, 0x4021);
+ mdelay(10);
+ /* Turn off adaptive input equalization and VGA adaptive algorithm
+ * control */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x89, 2, 1, 0x7313);
+ mdelay(10);
+ /* Turn on adaptive input equalization and VGA adaptive algorithm
+ * control */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x89, 2, 1, 0x7f13);
+ mdelay(10);
+
+ /* TAP settings for each channel 0-3 */
+ /* Ch-0 Tx */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0000);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x001f);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x9a, 2, 1, 0x000f);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x9b, 2, 1, 0x0004);
+ mdelay(10);
+
+ /* Ch-1 Rx */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0001);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x1400);
+ mdelay(10);
+ /* Transmitter Output polarity Inverted (Unfortunately,
+ * Rx polarity lines are wrongly inverted on board */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x4000);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x000f);
+ mdelay(10);
+
+ /* Ch-2 Tx */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0002);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x001f);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x9a, 2, 1, 0x000f);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x9b, 2, 1, 0x0004);
+ mdelay(10);
+
+ /* Ch-3 Rx */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x7f, 2, 1, 0x0003);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x1400);
+ mdelay(10);
+ /* Transmitter Output polarity Inverted (Unfortunately,
+ * Rx polarity lines are wrongly inverted on board */
+ bdk_twsix_write_ia(0, 0, 0x14, 0x97, 2, 1, 0x4000);
+ mdelay(10);
+ bdk_twsix_write_ia(0, 0, 0x14, 0x99, 2, 1, 0x000f);
+ mdelay(10);
+
+ /**
+ * The following hardware magically starts working after toggling
+ * GPIO_10_PHY_RESET_L:
+ * * SATA PHY
+ * * GBE PHY
+ * * XFI PHY
+ * * MMC
+ */
+ gpio_output(10, 0);
+ udelay(100);
+ gpio_output(10, 1);
+}
+
+struct chip_operations mainboard_ops = {
+ .name = CONFIG_MAINBOARD_PART_NUMBER,
+ .enable_dev = mainboard_enable,
+};
diff --git a/src/mainboard/cavium/cn8100_sff_evb/memlayout.ld b/src/mainboard/cavium/cn8100_sff_evb/memlayout.ld
new file mode 100644
index 0000000000..9349362cfa
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/memlayout.ld
@@ -0,0 +1 @@
+ #include <soc/memlayout.ld>
diff --git a/src/mainboard/cavium/cn8100_sff_evb/romstage.c b/src/mainboard/cavium/cn8100_sff_evb/romstage.c
new file mode 100644
index 0000000000..c35d0b3876
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/romstage.c
@@ -0,0 +1,45 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <arch/exception.h>
+#include <cbmem.h>
+#include <romstage_handoff.h>
+#include <soc/sdram.h>
+#include <soc/timer.h>
+#include <stdlib.h>
+#include <console/console.h>
+#include <program_loading.h>
+#include <libbdk-hal/bdk-config.h>
+#include <string.h>
+
+extern const struct bdk_devicetree_key_value devtree[];
+
+void main(void)
+{
+ watchdog_poke(0);
+
+ console_init();
+ exception_init();
+
+ bdk_config_set_fdt(devtree);
+
+ sdram_init();
+
+ watchdog_poke(0);
+
+ cbmem_initialize_empty();
+ run_ramstage();
+}
diff --git a/src/mainboard/cavium/cn8100_sff_evb/sff8104-linux.dts b/src/mainboard/cavium/cn8100_sff_evb/sff8104-linux.dts
new file mode 100644
index 0000000000..1448ee6220
--- /dev/null
+++ b/src/mainboard/cavium/cn8100_sff_evb/sff8104-linux.dts
@@ -0,0 +1,282 @@
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2016, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "cn81xx-linux.dtsi"
+
+&mrml_bridge {
+ mdio-nexus@1,3 {
+ mdio0@87e005003800 {
+ rgmii00: rgmii00 {
+ reg = <0> ;
+ compatible = "marvell,88e1510", "ethernet-phy-ieee802.3-c22";
+ };
+
+ qsgmii00: qsgmii00 {
+ qlm-mode = "0x000,qsgmii";
+ reg = <0x10> ;
+ compatible = "vitesse,vsc8574", "ethernet-phy-ieee802.3-c22";
+ };
+ qsgmii01: qsgmii01 {
+ qlm-mode = "0x001,qsgmii";
+ reg = <0x11> ;
+ compatible = "vitesse,vsc8574", "ethernet-phy-ieee802.3-c22";
+ };
+ qsgmii02: qsgmii02 {
+ qlm-mode = "0x002,qsgmii";
+ reg = <0x12> ;
+ compatible = "vitesse,vsc8574", "ethernet-phy-ieee802.3-c22";
+ };
+ qsgmii03: qsgmii03 {
+ qlm-mode = "0x003,qsgmii";
+ reg = <0x13> ;
+ compatible = "vitesse,vsc8574", "ethernet-phy-ieee802.3-c22";
+ };
+ };
+ mdio1@87e005003880 {
+ xfi00: xfi00 {
+ qlm-mode = "0x000,xfi";
+ reg = <0x0>;
+ compatible = "aquantia,aqr105", "ethernet-phy-ieee802.3-c45";
+ };
+ };
+ };
+
+ rgx0 {
+ rgmii00 {
+ reg = <0>;
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&rgmii00>;
+ };
+ };
+
+ bgx0 {
+ /* typename+qlm+typenumber eg :
+ qsgmii+bgx0+sgmmi0
+ */
+ qsgmii00 {
+ reg = <0>;
+ qlm-mode = "0x000,qsgmii";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&qsgmii00>;
+ };
+ qsgmii01 {
+ reg = <1>;
+ qlm-mode = "0x001,qsgmii";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&qsgmii01>;
+ };
+ qsgmii02 {
+ reg = <2>;
+ qlm-mode = "0x002,qsgmii";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&qsgmii02>;
+ };
+ qsgmii03 {
+ reg = <3>;
+ qlm-mode = "0x003,qsgmii";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&qsgmii03>;
+ };
+
+ xfi00 {
+ reg = <0>;
+ qlm-mode = "0x000,xfi";
+ local-mac-address = [00 00 00 00 00 00];
+ phy-handle = <&xfi00>;
+ };
+ };
+
+ bgx1 {
+ xfi10 {
+ reg = <0>;
+ qlm-mode = "0x010,xfi";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+
+ xfi11 {
+ reg = <1>;
+ qlm-mode = "0x011,xfi";
+ local-mac-address = [00 00 00 00 00 00];
+ };
+ };
+
+
+};
+
+&mmc_1_4 {
+ /* NOTE: the BDK is responsible for swapping the two slots.
+ * Unfortunately there does not appear to be any way to read the
+ * position of SW2-7 in software.
+ */
+ mmc-slot@0 {
+ compatible = "mmc-slot";
+ reg = <0>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <26000000>;
+ /* 1.8v is not supported */
+ no-1-8-v;
+ /* Bus width is only 4 bits maximum */
+ bus-width = <4>;
+ /* No write-protect switch is present */
+ disable-wp;
+ /* There is no card detection available; polling must be used. */
+ broken-cd;
+ /* High-speed mode is supported */
+ cap-sd-highspeed;
+ /* speed up device probing */
+ no-sdio;
+ no-mmc;
+ };
+ mmc-slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <26000000>;
+ mmc-ddr-3_3v;
+ /* 1.8v is not supported */
+ no-1-8-v;
+ /* Bus width is only 8 bits maximum */
+ bus-width = <8>;
+ /* No write-protect switch is present */
+ disable-wp;
+ /* There is no card detection available; polling must be used. */
+ broken-cd;
+ /* High-speed mode is supported */
+ cap-mmc-highspeed;
+ /* eMMC device is soldered onto the board */
+ non-removable;
+ /* speed up device probing */
+ no-sdio;
+ no-sd;
+ };
+};
+
+&i2c_9_0 {
+ /* another pca9535 at 0x20 is only visible via jtag */
+ gpio1: gpio-i2c@21 {
+ compatible = "nxp,pca9535";
+ gpio-controller;
+ reg = <0x21>;
+ gpio_base = <48>;
+ pins = <48 16>;
+ ngpios = <16>; // standard
+ n_gpios = <16>; // deprecated, driver required
+ #gpio-cells = <2>;
+ };
+
+ gpio2: gpio-i2c@22 {
+ compatible = "nxp,pca9535";
+ gpio-controller;
+ reg = <0x22>;
+ gpio_base = <64>;
+ pins = <64 16>;
+ ngpios = <16>; // standard
+ n_gpios = <16>; // deprecated, driver required
+ #gpio-cells = <2>;
+ };
+
+ mux@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+ };
+};
+
+&i2c_9_1 {
+ rom@54 {
+ compatible = "atmel,24c256";
+ reg = <0x54>;
+ pagesize = <64>;
+ };
+
+ rtc@68 {
+ compatible = "isil,isl12057";
+ reg = <0x68>;
+ };
+};
+
+&spi_7_0 {
+ flash@0 {
+ compatible = "micron,n25q128a13", "spi-flash", "jedec,spi-nor";
+ reg = <0x0>;
+ spi-max-frequency = <16000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ flash@1 {
+ compatible = "spinand,mt29f", "mt29f";
+ reg = <0x1>;
+ spi-max-frequency = <50000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ nand-ecc-mode = "none";
+ };
+};
+
+&nfc {
+ nand@1 {
+ reg = <0x1>;
+ nand-ecc-mode = "none";
+ };
+};
diff --git a/src/soc/cavium/Kconfig b/src/soc/cavium/Kconfig
new file mode 100644
index 0000000000..49070cfbf2
--- /dev/null
+++ b/src/soc/cavium/Kconfig
@@ -0,0 +1,2 @@
+# Load all chipsets
+source "src/soc/cavium/*/Kconfig"
diff --git a/src/soc/cavium/cn81xx/Kconfig b/src/soc/cavium/cn81xx/Kconfig
new file mode 100644
index 0000000000..ca8fbd0f46
--- /dev/null
+++ b/src/soc/cavium/cn81xx/Kconfig
@@ -0,0 +1,27 @@
+config SOC_CAVIUM_CN81XX
+ bool
+ default n
+ select ARCH_BOOTBLOCK_ARMV8_64
+ select ARCH_RAMSTAGE_ARMV8_64
+ select ARCH_ROMSTAGE_ARMV8_64
+ select ARCH_VERSTAGE_ARMV8_64
+ select BOOTBLOCK_CONSOLE
+ select DRIVERS_UART_PL011
+ select GENERIC_UDELAY
+ select HAVE_MONOTONIC_TIMER
+ select UART_OVERRIDE_REFCLK
+ select SOC_CAVIUM_COMMON
+
+if SOC_CAVIUM_CN81XX
+
+config ARCH_ARMV8_EXTENSION
+ int
+ default 1
+
+config HEAP_SIZE
+ default 0x10000
+
+config STACK_SIZE
+ default 0x2000
+
+endif
diff --git a/src/soc/cavium/cn81xx/Makefile.inc b/src/soc/cavium/cn81xx/Makefile.inc
new file mode 100644
index 0000000000..d265c19bb8
--- /dev/null
+++ b/src/soc/cavium/cn81xx/Makefile.inc
@@ -0,0 +1,70 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2017-present Facebook, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+ifeq ($(CONFIG_SOC_CAVIUM_CN81XX),y)
+
+# bootblock
+bootblock-$(CONFIG_BOOTBLOCK_CUSTOM) += bootblock_custom.S
+bootblock-y += bootblock.c
+bootblock-y += twsi.c
+bootblock-y += clock.c
+bootblock-y += gpio.c
+bootblock-y += timer.c
+bootblock-y += spi.c
+bootblock-y += uart.c
+bootblock-y += cpu.c
+ifeq ($(CONFIG_BOOTBLOCK_CONSOLE),y)
+bootblock-$(CONFIG_DRIVERS_UART) += uart.c
+endif
+
+################################################################################
+# romstage
+
+romstage-y += twsi.c
+romstage-y += clock.c
+romstage-y += gpio.c
+romstage-y += timer.c
+romstage-y += spi.c
+romstage-y += uart.c
+romstage-$(CONFIG_DRIVERS_UART) += uart.c
+romstage-< += cpu.c
+
+romstage-y += sdram.c
+romstage-y += ../common/cbmem.c
+# BDK coreboot interface
+romstage-y += ../common/bdk-coreboot.c
+
+
+################################################################################
+# ramstage
+
+ramstage-y += twsi.c
+ramstage-y += clock.c
+ramstage-y += gpio.c
+ramstage-y += timer.c
+ramstage-y += spi.c
+ramstage-y += uart.c
+ramstage-$(CONFIG_DRIVERS_UART) += uart.c
+ramstage-y += sdram.c
+ramstage-y += soc.c
+ramstage-y += cpu.c
+
+# BDK coreboot interface
+ramstage-y += ../common/bdk-coreboot.c
+
+
+CPPFLAGS_common += -Isrc/soc/cavium/cn81xx/include
+
+endif
diff --git a/src/soc/cavium/cn81xx/bootblock.c b/src/soc/cavium/cn81xx/bootblock.c
new file mode 100644
index 0000000000..8517467de1
--- /dev/null
+++ b/src/soc/cavium/cn81xx/bootblock.c
@@ -0,0 +1,50 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <arch/io.h>
+#include <commonlib/helpers.h>
+#include <soc/bootblock.h>
+#include <soc/sysreg.h>
+#include <soc/timer.h>
+#include <libbdk-arch/bdk-asm.h>
+
+static void init_sysreg(void)
+{
+ /* The defaults for write buffer timeouts are poor */
+ u64 cvmmemctl0;
+ BDK_MRS(s3_0_c11_c0_4, cvmmemctl0);
+ cvmmemctl0 |= AP_CVMMEMCTL0_EL1_WBFTONSHENA |
+ AP_CVMMEMCTL0_EL1_WBFTOMRGCLRENA;
+ BDK_MSR(s3_0_c11_c0_4, cvmmemctl0);
+}
+
+void bootblock_soc_early_init(void)
+{
+}
+
+void bootblock_soc_init(void)
+{
+ /* initialize system registers */
+ init_sysreg();
+
+ /* Set watchdog to 5 seconds timeout */
+ watchdog_set(0, 5000);
+ watchdog_poke(0);
+
+ /* TODO: additional clock init? */
+}
diff --git a/src/soc/cavium/cn81xx/bootblock_custom.S b/src/soc/cavium/cn81xx/bootblock_custom.S
new file mode 100644
index 0000000000..69985b7834
--- /dev/null
+++ b/src/soc/cavium/cn81xx/bootblock_custom.S
@@ -0,0 +1,257 @@
+/*
+ * Early initialization code for aarch64 (a.k.a. armv8)
+ *
+ * Copyright 2016 Cavium, Inc. <support@cavium.com>
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/asm.h>
+#include <soc/addressmap.h>
+
+ENTRY(_start)
+ .org 0
+ /**
+ * According to the reference manual the first instruction is fetched from
+ * offset 0x100, but at offset 0 a branch instruction is always placed.
+ * Support two entry points for now.
+ * To save memory put the cavium specific init code between those to entry
+ * points.
+ */
+ ic ialluis
+ fmov d30, x0 /* Save X0 in FPR for use later */
+ fmov d31, x1 /* Save X1 in FPR for use later */
+ adr x1, _start /* x1 = _start location based on PC */
+ fmov d29, x1 /* Save PC in FPR for use later */
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ /* Change the core to big endian mode for EL3 */
+ mrs x0, SCTLR_EL3
+ mov x1, 1<<25 /* Set SCTLR_EL3[ee]=1 */
+ orr x0, x0, x1
+ msr SCTLR_EL3, x0
+ #define ENDIAN_CONVERT64(reg) rev reg, reg
+ #define ENDIAN_CONVERT32(reg) rev reg, reg
+ #define ENDIAN_CONVERT16(reg) rev16 reg, reg
+#elif __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
+ /* Nothing needed, default is little endian */
+ #define ENDIAN_CONVERT64(reg)
+ #define ENDIAN_CONVERT32(reg)
+ #define ENDIAN_CONVERT16(reg)
+#else
+ #error Unknown endianness
+#endif
+
+ mov x0, (LMC0_PF_BAR0 >> 32)
+ lsl x0, x0, 32
+ mov x1, (LMC0_PF_BAR0 & 0xffffffff)
+ orr x0, x0, x1
+
+ /* Test if DRAM PLL is running */
+ ldr x1, [x0, LMC0_DDR_PLL_CTL0]
+
+ tst x1, 0x80
+
+ b.ne cache_setup_done
+
+ bl _setup_car
+
+cache_setup_done:
+
+ /* Check that we're running on the node we're linked for */
+ mrs x0, MPIDR_EL1
+ ubfx x0, x0, 16, 8 /* Bits 23:16 are the physical node ID */
+ mov x1, 0x0
+ cmp x0, x1
+
+ b.ne _wfi
+
+node_check_done:
+ /* Get code position */
+ mov x1, 0x020000
+ mov x0, BOOTROM_OFFSET
+ add x1, x0, x1
+
+ adr x0, _start
+
+ /**
+ * Check if IROM has loaded the code to CONFIG_BOOTROM_OFFSET.
+ * In case the offset is wrong, try to relocate.
+ * Ideally the following code is never executed.
+ * FIXME: Add region overlap check.
+ */
+ cmp x0, x1
+ b.eq after_relocate
+
+relocate:
+ /* Get bootblock length */
+ ldr x2, =_program
+ ldr x3, =_eprogram
+ sub x2, x2, x3
+ b copy_code
+
+.align 7
+copy_code:
+ ldp q0, q1, [x1], 32 /* Load 32 bytes */
+ subs w2, w2, 32 /* Subtract 32 from length, setting flags */
+ stp q0, q1, [x0], 32 /* Store 32 bytes */
+ b.gt copy_code /* Repeat if length is still positive */
+ dmb sy
+
+ /* Load the actual location we're suppose to be at */
+ adr x0, after_relocate /* Relative address */
+ adr x1, _start /* Relative address */
+ sub x0, x0, x1 /* This only works if _start is suppose to be zero */
+ mov x1, BOOTROM_OFFSET
+ add x0, x0, x1
+ br x0 /* Branch to relocated code */
+
+ ic ialluis /* Clear the icache now that all code is correct */
+
+after_relocate:
+ /* Allow unaligned memory access as long as MMU is disabled */
+ mrs x22, s3_0_c11_c0_4
+ orr x22, x22, # (1 << 37) /* Set DCVA47 */
+ msr s3_0_c11_c0_4, x22
+
+ bl start
+
+ /* Real entry point */
+ .org 0x100
+ b _start
+ENDPROC(_start)
+
+
+ENTRY(_setup_car)
+ mrs x0, MIDR_EL1
+ ubfx x0, x0, 4, 12 /* Bits 15:4 are the part number */
+ cmp x0, 0xb0
+ b.ge _wfi
+
+thunder1_cache_setup:
+ /**
+ * Setup L2 cache to allow secure access to all of the address space
+ * thunder1 compability list:
+ * - CN81XX
+ * - CN83XX
+ * - CN88XX
+ */
+ #define REGIONX_START 0x1000
+ #define REGIONX_END 0x1008
+ #define REGIONX_ATTR 0x1010
+ mov x0, L2C_PF_BAR0 >> 32
+ lsl x0, x0, 32
+ mov x1, (L2C_PF_BAR0 & 0xffffffff)
+ orr x0, x0, x1
+ str xzr, [x0, REGIONX_START] /* Start of zero */
+ mov x1, 0x3fffff00000 /* End of max address */
+ ENDIAN_CONVERT64(x1)
+ str x1, [x0, REGIONX_END]
+ mov x1, 2 /* Secure only access */
+ ENDIAN_CONVERT64(x1)
+ str x1, [x0, REGIONX_ATTR]
+ /* Update way partition to allow core 0 to write to L2 */
+ #define L2C_WPAR_PP0_OFFSET 0x40000
+ mov x1, L2C_WPAR_PP0_OFFSET
+ str xzr, [x0, x1]
+ ldr xzr, [x0, x1] /* Read back to make sure done */
+ #undef REGIONX_START
+ #undef REGIONX_END
+ #undef REGIONX_ATTR
+ #undef L2C_WPAR_PP0_OFFSET
+
+ /**
+ * At this point the whole CAR is readable and writeable, but if
+ * we touch to many cache-lines our code might get flushed out.
+ * We have to lock all cache-lines that are to be used as RAM, which are
+ * the ones marked as SRAM in memlayout.
+ */
+ mrs x0, CTR_EL0 /* Get cache-line size */
+ /* [19:16] - Indicates (Log2(number of words in cache line) */
+ ubfx x0, x0, 16, 4
+ mov x1, 4 /* Bytes in a word (32-bit) */
+ lsl x0, x1, x0 /* Number of Bytes in x0 */
+
+ sub x1, x0, 1
+ mvn x1, x1 /* Place mask in x1 */
+
+ ldr x3, =_sram
+ and x3, x3, x1 /* Align addresses with cache-lines */
+ ldr x4, =_esram
+ add x4, x4, x0
+ sub x4, x4, 1
+ and x4, x4, x1 /* Align addresses with cache-lines */
+ sub x2, x4, x3 /* Store sram length in x2 */
+
+lock_cache_lines:
+ sys #0, c11, c1, #4, x3
+ add x3, x3, x0 /* Increment address by cache-line bytes */
+ subs w2, w2, w0 /* Subtract cache-line bytes from length */
+ b.gt lock_cache_lines /* Repeat if length is still positive */
+
+ /**
+ * The locked region isn't considered dirty by L2. Do read/write of
+ * each cache line to force each to be dirty. This is needed across the
+ * whole line to make sure the L2 dirty bits are all up to date.
+ * NOTE: If we'd relocate we could memset the whole memory !
+ */
+ ldr x3, =_sram
+ and x3, x3, x1 /* Align addresses with cache-lines */
+ ldr x4, =_esram
+ add x4, x4, x0
+ sub x4, x4, 1
+ and x4, x4, x1 /* Align addresses with cache-lines */
+ sub x2, x4, x3 /* Store sram length in x2 */
+ mov x4, x3
+ b dirty_cache_line
+
+.align 7
+dirty_cache_line:
+ ldp q0, q1, [x3], 32 /* Load 32 bytes */
+ subs w2, w2, 32 /* Subtract 32 from length, setting flags */
+ stp q0, q1, [x4], 32 /* Store 32 bytes */
+ b.gt dirty_cache_line /* Repeat if length is still positive */
+ dmb sy
+
+clear_interrupts:
+ /**
+ * As the memory controller isn't running, but we access the DRAM's
+ * address space, some interrupt flags had been set.
+ * Tidy up our mess now on (valid for CN81XX only).
+ */
+ mov x0, (L2C_TAD0_INT_W1C >> 32)
+ lsl x0, x0, 32
+ mov x1, (L2C_TAD0_INT_W1C & 0xffffffff)
+ orr x0, x0, x1
+
+ ldr x1, [x0]
+ orr x1, x1, 0x1c00 /* Clear WRDISLMC, RDDISLMC, RDNXM */
+ str x1, [x0]
+
+ ret
+ENDPROC(_setup_car)
+
+ENTRY(_wfi)
+ wfi
+ENDPROC(_wfi)
+
+ENTRY(start)
+ bl arm64_init_cpu
+
+ fmov x0, d30 /* The original X0, info from previous image */
+ fmov x1, d31 /* The original X1, info from previous image */
+ fmov x2, d29 /* The original PC we were loaded at */
+
+ /* Call C entry */
+ bl bootblock_main
+
+ENDPROC(start)
diff --git a/src/soc/cavium/cn81xx/chip.h b/src/soc/cavium/cn81xx/chip.h
new file mode 100644
index 0000000000..9716a5da6a
--- /dev/null
+++ b/src/soc/cavium/cn81xx/chip.h
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_CHIP_H
+#define __SOC_CAVIUM_CN81XX_CHIP_H
+
+struct soc_cavium_cn81xx_config {
+};
+
+#endif /* __SOC_CAVIUM_CN81XX_CHIP_H */
diff --git a/src/soc/cavium/cn81xx/clock.c b/src/soc/cavium/cn81xx/clock.c
new file mode 100644
index 0000000000..bd6514cd41
--- /dev/null
+++ b/src/soc/cavium/cn81xx/clock.c
@@ -0,0 +1,79 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <soc/clock.h>
+#include <arch/io.h>
+#include <soc/addressmap.h>
+
+#define PLL_REF_CLK 50000000 /* 50 MHz */
+
+union cavm_rst_boot {
+ u64 u;
+ struct {
+ u64 rboot_pin:1;
+ u64 rboot:1;
+ u64 lboot:10;
+ u64 lboot_ext23:6;
+ u64 lboot_ext45:6;
+ u64 reserved_24_29:6;
+ u64 lboot_oci:3;
+ u64 pnr_mul:6;
+ u64 reserved_39_39:1;
+ u64 c_mul:7;
+ u64 reserved_47_54:8;
+ u64 dis_scan:1;
+ u64 dis_huk:1;
+ u64 vrm_err:1;
+ u64 jt_tstmode:1;
+ u64 ckill_ppdis:1;
+ u64 trusted_mode:1;
+ u64 ejtagdis:1;
+ u64 jtcsrdis:1;
+ u64 chipkill:1;
+ } s;
+};
+
+/**
+ * Returns the reference clock speed in Hz
+ */
+u64 thunderx_get_ref_clock(void)
+{
+ return PLL_REF_CLK;
+}
+
+
+/**
+ * Returns the I/O clock speed in Hz
+ */
+u64 thunderx_get_io_clock(void)
+{
+ union cavm_rst_boot rst_boot;
+
+ rst_boot.u = read64((void *)RST_PF_BAR0);
+
+ return rst_boot.s.pnr_mul * PLL_REF_CLK;
+}
+
+/**
+ * Returns the core clock speed in Hz
+ */
+u64 thunderx_get_core_clock(void)
+{
+ union cavm_rst_boot rst_boot;
+
+ rst_boot.u = read64((void *)RST_PF_BAR0);
+
+ return rst_boot.s.c_mul * PLL_REF_CLK;
+}
diff --git a/src/soc/cavium/cn81xx/cpu.c b/src/soc/cavium/cn81xx/cpu.c
new file mode 100644
index 0000000000..c054aa8987
--- /dev/null
+++ b/src/soc/cavium/cn81xx/cpu.c
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <types.h>
+#include <arch/io.h>
+#include <soc/cpu.h>
+#include <bdk-coreboot.h>
+
+/* Return the number of cores available in the chip */
+size_t cpu_get_num_cores(void)
+{
+ uint64_t available = read64((void *)0x87e006001738ll);
+ return bdk_dpop(available);
+}
diff --git a/src/soc/cavium/cn81xx/gpio.c b/src/soc/cavium/cn81xx/gpio.c
new file mode 100644
index 0000000000..340ac1bc73
--- /dev/null
+++ b/src/soc/cavium/cn81xx/gpio.c
@@ -0,0 +1,193 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <console/console.h>
+#include <soc/gpio.h>
+#include <arch/io.h>
+#include <endian.h>
+#include <soc/addressmap.h>
+
+union gpio_const {
+ u64 u;
+ struct {
+ u64 gpios:8; /** Number of GPIOs implemented */
+ u64 pp:8; /** Number of PP vectors */
+ u64:48; /* Reserved */
+ } s;
+};
+union bit_cfg {
+ u64 u;
+ struct {
+ u64 tx_oe : 1; /* Output Enable */
+ u64 xor : 1; /* Invert */
+ u64 int_en : 1; /* Interrupt Enable */
+ u64 int_type : 1; /* Type of Interrupt */
+ u64 filt_cnt : 4; /* Glitch filter counter */
+ u64 filt_sel : 4; /* Glitch filter select */
+ u64 tx_od : 1; /* Set Output to Open Drain */
+ u64 : 3;
+ u64 pin_sel : 10; /* Select type of pin */
+ u64 : 38;
+ } s;
+};
+
+struct cavium_gpio {
+ u64 rx_dat;
+ u64 tx_set;
+ u64 tx_clr;
+ u64 multicast;
+ u64 ocla_exten_trg;
+ u64 strap;
+ u64 reserved[12];
+ union gpio_const gpio_const; /* Offset 90 */
+ u64 reserved2[109];
+ union bit_cfg bit_cfg[48]; /* Offset 400 */
+};
+
+/* Base address of GPIO BAR */
+static const void *gpio_get_baseaddr(void)
+{
+ return (const void *)GPIO_PF_BAR0;
+}
+
+/* Number of GPIO pins. Usually 48. */
+gpio_t gpio_pin_count(void)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+ union gpio_const gpio_const;
+
+ gpio_const.u = read64(&regs->gpio_const.u);
+
+ if (gpio_const.s.gpios > 64)
+ return 64; // FIXME: Add support for more than 64 GPIOs
+ return gpio_const.s.gpios;
+}
+
+/* Set GPIO to software control and direction INPUT */
+void gpio_input(gpio_t gpio)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+ union bit_cfg bit_cfg;
+
+ if (gpio >= gpio_pin_count())
+ return;
+
+ printk(BIOS_SPEW, "GPIO(%u): direction input\n", gpio);
+
+ bit_cfg.u = read64(&regs->bit_cfg[gpio]);
+ bit_cfg.s.pin_sel = 0;
+ bit_cfg.s.tx_oe = 0;
+ write64(&regs->bit_cfg[gpio], bit_cfg.u);
+}
+
+/* Set GPIO of direction OUTPUT to level */
+void gpio_set(gpio_t gpio, int value)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+
+ if (gpio >= gpio_pin_count())
+ return;
+
+ printk(BIOS_SPEW, "GPIO(%u): level: %u\n", gpio, !!value);
+
+ if (value)
+ write64(&regs->tx_set, 1 << gpio);
+ else
+ write64(&regs->tx_clr, 1 << gpio);
+}
+
+/* Set GPIO direction to OUTPUT with level */
+void gpio_output(gpio_t gpio, int value)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+ union bit_cfg bit_cfg;
+
+ if (gpio >= gpio_pin_count())
+ return;
+
+ gpio_set(gpio, value);
+
+ printk(BIOS_SPEW, "GPIO(%u): direction output with level: %u\n", gpio,
+ !!value);
+
+ bit_cfg.u = read64(&regs->bit_cfg[gpio]);
+ bit_cfg.s.pin_sel = 0;
+ bit_cfg.s.tx_oe = 1;
+ write64(&regs->bit_cfg[gpio], bit_cfg.u);
+}
+
+/* Set GPIO invert flag, that affects INPUT and OUTPUT */
+void gpio_invert(gpio_t gpio, int value)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+ union bit_cfg bit_cfg;
+
+ if (gpio >= gpio_pin_count())
+ return;
+
+ bit_cfg.u = read64(&regs->bit_cfg[gpio]);
+ bit_cfg.s.xor = !!value;
+ write64(&regs->bit_cfg[gpio], bit_cfg.u);
+
+ printk(BIOS_SPEW, "GPIO(%u): invert: %s\n", gpio, value ? "ON" : "OFF");
+}
+
+/* Read GPIO level with direction set to INPUT */
+int gpio_get(gpio_t gpio)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+
+ if (gpio >= gpio_pin_count())
+ return 0;
+
+ const u64 reg = read64(&regs->rx_dat);
+ printk(BIOS_SPEW, "GPIO(%u): input: %u\n", gpio, !!(reg & (1 << gpio)));
+
+ return !!(reg & (1 << gpio));
+}
+
+/* Read GPIO STRAP level sampled at cold boot */
+int gpio_strap_value(gpio_t gpio)
+{
+ struct cavium_gpio *regs = (struct cavium_gpio *)gpio_get_baseaddr();
+
+ if (gpio >= gpio_pin_count())
+ return 0;
+
+ const u64 reg = read64(&regs->strap);
+ printk(BIOS_SPEW, "GPIO(%u): strap: %u\n", gpio, !!(reg & (1 << gpio)));
+
+ return !!(reg & (1 << gpio));
+}
+
+/* FIXME: Parse devicetree ? */
+void gpio_init(void)
+{
+ const size_t pin_count = gpio_pin_count();
+
+ printk(BIOS_DEBUG, "GPIO: base address: %p, pin count: %zd\n",
+ gpio_get_baseaddr(), pin_count);
+
+ if (!pin_count)
+ return;
+}
+
+void gpio_input_pulldown(gpio_t gpio)
+{
+}
+
+void gpio_input_pullup(gpio_t gpio)
+{
+}
diff --git a/src/soc/cavium/cn81xx/include/soc/addressmap.h b/src/soc/cavium/cn81xx/include/soc/addressmap.h
new file mode 100644
index 0000000000..e23549450b
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/addressmap.h
@@ -0,0 +1,123 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_ADDRESSMAP_H__
+#define __SOC_CAVIUM_CN81XX_ADDRESSMAP_H__
+
+#define MAX_DRAM_ADDRESS 0x2000000000ULL /* 128GB */
+
+/* Physical addressed with bit 47 set indicate I/O memory space. */
+
+/* ARM code entry vector */
+#define BOOTROM_OFFSET 0x100000
+
+/* L2C */
+#define L2C_PF_BAR0 0x87E080800000ULL
+#define L2C_TAD0_PF_BAR0 (0x87E050000000ULL + 0x10000)
+#define L2C_TAD0_INT_W1C (0x87E050000000ULL + 0x40000)
+#define L2C_CBC0_PF_BAR0 0x87E058000000ULL
+#define L2C_MCI0_PF_BAR0 0x87E05C000000ULL
+
+/* LMC */
+#define LMC0_PF_BAR0 0x87E088000000ULL
+#define LMC0_DDR_PLL_CTL0 0x258
+
+/* OCLA */
+
+/* IOB */
+#define IOBN0_PF_BAR0 0x87E0F0000000ULL
+#define MRML_PF_BAR0 0x87E0FC000000ULL
+
+/* SMMU */
+#define SMMU_PF_BAR0 0x830000000000ULL
+
+/* GTI */
+#define GTI_PF_BAR0 0x844000000000ULL
+
+/* PCC */
+#define ECAM_PF_BAR2 0x848000000000ULL
+
+/* CPT */
+/* SLI */
+
+/* RST */
+#define RST_PF_BAR0 (0x87E006000000ULL + 0x1600)
+#define FUSF_PF_BAR0 0x87E004000000ULL
+#define MIO_FUS_PF_BAR0 0x87E003000000ULL
+#define MIO_BOOT_PF_BAR0 0x87E000000000ULL
+
+/* PTP */
+#define MIO_PTP_PF_BAR0 0x807000000000ULL
+
+/* GIC */
+/* NIC */
+/* LBK */
+
+#define GTI_PF_BAR0 0x844000000000ULL
+
+/* DAP */
+/* BCH */
+/* KEY */
+/* RNG */
+
+#define GSER0_PF_BAR0 (0x87E090000000ULL + (0 << 24))
+#define GSER1_PF_BAR0 (0x87E090000000ULL + (1 << 24))
+#define GSER2_PF_BAR0 (0x87E090000000ULL + (2 << 24))
+#define GSER3_PF_BAR0 (0x87E090000000ULL + (3 << 24))
+#define GSERx_PF_BAR0(x) \
+ ((((x) == 0) || ((x) == 1) || ((x) == 2) || ((x) == 3)) ? \
+ (0x87E090000000ULL + ((x) << 24)) : 0)
+
+/* PEM */
+/* SATA */
+/* USB */
+
+/* UAA */
+#define UAA0_PF_BAR0 (0x87E028000000ULL + (0 << 24))
+#define UAA1_PF_BAR0 (0x87E028000000ULL + (1 << 24))
+#define UAA2_PF_BAR0 (0x87E028000000ULL + (2 << 24))
+#define UAA3_PF_BAR0 (0x87E028000000ULL + (3 << 24))
+#define UAAx_PF_BAR0(x) \
+ ((((x) == 0) || ((x) == 1) || ((x) == 2) || ((x) == 3)) ? \
+ (0x87E028000000ULL + ((x) << 24)) : 0)
+
+
+/* TWSI */
+#define MIO_TWS0_PF_BAR0 (0x87E0D0000000ULL + (0 << 24))
+#define MIO_TWS1_PF_BAR0 (0x87E0D0000000ULL + (1 << 24))
+#define MIO_TWSx_PF_BAR0(x) \
+ ((((x) == 0) || ((x) == 1)) ? (0x87E0D0000000ULL + ((x) << 24)) : 0)
+
+/* GPIO */
+#define GPIO_PF_BAR0 0x803000000000ULL
+
+/* SGPIO */
+#define SGP_PF_BAR0 0x803000000000ULL
+
+/* SMI */
+
+/* SPI */
+#define MPI_PF_BAR0 (0x804000000000ULL + 0x1000)
+
+/* PCM */
+/* PBUS */
+/* NDF */
+/* EMM */
+
+/* VRM */
+/* VRM BARs are spaced apart by 0x1000000 */
+#define VRM0_PF_BAR0 0x87E021000000ULL
+
+#endif /* __SOC_CAVIUM_CN81XX_ADDRESSMAP_H__ */
diff --git a/src/soc/cavium/cn81xx/include/soc/clock.h b/src/soc/cavium/cn81xx/include/soc/clock.h
new file mode 100644
index 0000000000..d436c121cb
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/clock.h
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SRC_SOC_CAVIUM_CN81XX_INCLUDE_CLOCK_H_
+#define SRC_SOC_CAVIUM_CN81XX_INCLUDE_CLOCK_H_
+
+#include <types.h>
+
+u64 thunderx_get_ref_clock(void);
+u64 thunderx_get_io_clock(void);
+u64 thunderx_get_core_clock(void);
+
+#endif /* SRC_SOC_CAVIUM_CN81XX_INCLUDE_CLOCK_H_ */
diff --git a/src/soc/cavium/cn81xx/include/soc/cpu.h b/src/soc/cavium/cn81xx/include/soc/cpu.h
new file mode 100644
index 0000000000..df3c06955a
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/cpu.h
@@ -0,0 +1,22 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_CPU_H__
+#define __SOC_CAVIUM_CN81XX_CPU_H__
+
+size_t cpu_get_num_cores(void);
+
+#endif /* __SOC_CAVIUM_CN81XX_CPU_H__ */
diff --git a/src/soc/cavium/cn81xx/include/soc/gpio.h b/src/soc/cavium/cn81xx/include/soc/gpio.h
new file mode 100644
index 0000000000..6986482f79
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/gpio.h
@@ -0,0 +1,34 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Rockchip Inc.
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __COREBOOT_SRC_SOC_CAVIUM_COMMON_INCLUDE_SOC_GPIO_H
+#define __COREBOOT_SRC_SOC_CAVIUM_COMMON_INCLUDE_SOC_GPIO_H
+
+#include <types.h>
+
+typedef u32 gpio_t;
+#include <gpio.h>
+
+/* The following functions must be implemented by SoC/board code. */
+
+
+gpio_t gpio_pin_count(void);
+void gpio_invert(gpio_t gpio, int value);
+int gpio_strap_value(gpio_t gpio);
+
+void gpio_init(void);
+
+#endif
diff --git a/src/soc/cavium/cn81xx/include/soc/memlayout.ld b/src/soc/cavium/cn81xx/include/soc/memlayout.ld
new file mode 100644
index 0000000000..f0ac2c9da5
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/memlayout.ld
@@ -0,0 +1,41 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Rockchip Inc.
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <memlayout.h>
+#include <soc/addressmap.h>
+#include <arch/header.ld>
+
+SECTIONS
+{
+ DRAM_START(0x00000000)
+ /* FIXME: Place BL31 in first 1MiB */
+
+ /* bootblock-custom.S does setup CAR from SRAM_START to SRAM_END */
+ SRAM_START(BOOTROM_OFFSET)
+ STACK(BOOTROM_OFFSET, 16K)
+ TIMESTAMP(BOOTROM_OFFSET + 0x4000, 4K)
+ PRERAM_CBFS_CACHE(BOOTROM_OFFSET + 0x6000, 8K)
+ PRERAM_CBMEM_CONSOLE(BOOTROM_OFFSET + 0x8000, 8K)
+
+ BOOTBLOCK(BOOTROM_OFFSET + 0x20000, 64K)
+ ROMSTAGE(BOOTROM_OFFSET + 0x40000, 256K)
+ SRAM_END(BOOTROM_OFFSET + 0x80000)
+ TTB(BOOTROM_OFFSET + 0x80000, 128K)
+ RAMSTAGE(BOOTROM_OFFSET + 0xa0000, 512K)
+
+ /* Leave some space for the payload */
+ POSTRAM_CBFS_CACHE(0x2000000, 16M)
+}
diff --git a/src/soc/cavium/cn81xx/include/soc/sdram.h b/src/soc/cavium/cn81xx/include/soc/sdram.h
new file mode 100644
index 0000000000..5a3e5196b5
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/sdram.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_SDRAM_H__
+#define __SOC_CAVIUM_CN81XX_SDRAM_H__
+
+#include <types.h>
+
+size_t sdram_size_mb(void);
+void sdram_init(void);
+
+#endif /* !__SOC_CAVIUM_CN81XX_SDRAM_H__ */
diff --git a/src/soc/cavium/cn81xx/include/soc/soc.h b/src/soc/cavium/cn81xx/include/soc/soc.h
new file mode 100644
index 0000000000..a751e64846
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/soc.h
@@ -0,0 +1,43 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_INCLUDE_SOC_SOC_H
+#define __SOC_CAVIUM_CN81XX_INCLUDE_SOC_SOC_H
+
+#include <inttypes.h>
+#include <types.h>
+
+/* MIO BOOT Registers */
+struct cn81xx_mio_boot {
+ u8 rsvd0[0xb0];
+ u64 thr;
+ u8 rsvd1[0x8];
+ u64 pin_defs;
+ u8 rsvd2[0x8];
+ u64 ap_jump;
+ u64 rom_limit;
+ u8 rsvd3[0x18];
+ u64 bist_stat;
+};
+check_member(cn81xx_mio_boot, bist_stat, 0xf8);
+
+/*
+ * 0 = Board supplies 100MHz to DLM_REF_CLK
+ * 1 = bOard supplies 50MHz to PLL_REFCLK
+ * */
+#define MIO_BOOT_PIN_DEFS_UART0_RTS (1 << 16)
+#define MIO_BOOT_PIN_DEFS_UART1_RTS (1 << 17)
+
+#endif /* ! __SOC_CAVIUM_CN81XX_INCLUDE_SOC_SOC_H */
diff --git a/src/soc/cavium/cn81xx/include/soc/spi.h b/src/soc/cavium/cn81xx/include/soc/spi.h
new file mode 100644
index 0000000000..bb69daac91
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/spi.h
@@ -0,0 +1,40 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __COREBOOT_SRC_SOC_CN81XX_INCLUDE_SOC_SPI_H
+#define __COREBOOT_SRC_SOC_CN81XX_INCLUDE_SOC_SPI_H
+
+/* This driver serves as a CBFS media source. */
+#include <spi-generic.h>
+#include <stddef.h>
+
+void spi_enable(const size_t bus);
+void spi_disable(const size_t bus);
+void spi_set_cs(const size_t bus,
+ const size_t chip_select,
+ const size_t assert_is_low);
+void spi_set_clock(const size_t bus,
+ const size_t speed_hz,
+ const size_t idle_low,
+ const size_t idle_cycles);
+void spi_set_lsbmsb(const size_t bus, const size_t lsb_first);
+void spi_init_custom(const size_t bus,
+ const size_t speed_hz,
+ const size_t idle_low,
+ const size_t idle_cycles,
+ const size_t lsb_first,
+ const size_t chip_select,
+ const size_t assert_is_low);
+#endif /* ! __COREBOOT_SRC_SOC_CN81XX_INCLUDE_SOC_SPI_H */
diff --git a/src/soc/cavium/cn81xx/include/soc/timer.h b/src/soc/cavium/cn81xx/include/soc/timer.h
new file mode 100644
index 0000000000..a12f68e422
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/timer.h
@@ -0,0 +1,30 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_CN81XX_TIMER_H__
+#define __SOC_CAVIUM_CN81XX_TIMER_H__
+
+#include <inttypes.h>
+#include <types.h>
+#include <timer.h>
+#include <delay.h>
+
+/* Watchdog functions */
+void watchdog_set(const size_t index, unsigned int timeout_ms);
+void watchdog_poke(const size_t index);
+void watchdog_disable(const size_t index);
+int watchdog_is_running(const size_t index);
+
+#endif /* __SOC_CAVIUM_CN81XX_TIMER_H__ */
diff --git a/src/soc/cavium/cn81xx/include/soc/twsi.h b/src/soc/cavium/cn81xx/include/soc/twsi.h
new file mode 100644
index 0000000000..6c5211e63b
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/twsi.h
@@ -0,0 +1,23 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <types.h>
+#include <device/i2c.h>
+
+#ifndef __SOC_CAVIUM_CN81XX_INCLUDE_SOC_TWSI_H
+#define __SOC_CAVIUM_CN81XX_INCLUDE_SOC_TWSI_H
+
+int twsi_init(unsigned int bus, enum i2c_speed hz);
+
+#endif
diff --git a/src/soc/cavium/cn81xx/include/soc/uart.h b/src/soc/cavium/cn81xx/include/soc/uart.h
new file mode 100644
index 0000000000..e4022068bc
--- /dev/null
+++ b/src/soc/cavium/cn81xx/include/soc/uart.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_CAVIUM_COMMON_INCLUDE_SOC_UART_H
+#define __SOC_CAVIUM_COMMON_INCLUDE_SOC_UART_H
+
+#include <inttypes.h>
+#include <types.h>
+
+int uart_is_enabled(const size_t bus);
+int uart_setup(const size_t bus, int baudrate);
+
+#endif /* __SOC_CAVIUM_COMMON_INCLUDE_SOC_UART_H */
diff --git a/src/soc/cavium/cn81xx/sdram.c b/src/soc/cavium/cn81xx/sdram.c
new file mode 100644
index 0000000000..77717ea78d
--- /dev/null
+++ b/src/soc/cavium/cn81xx/sdram.c
@@ -0,0 +1,94 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <console/console.h>
+#include <soc/sdram.h>
+
+#include <libbdk-arch/bdk-warn.h>
+#include <libbdk-arch/bdk-csrs-rst.h>
+#include <libbdk-boot/bdk-watchdog.h>
+#include <libbdk-dram/bdk-dram-config.h>
+#include <libbdk-dram/bdk-dram-test.h>
+#include <libbdk-hal/bdk-config.h>
+#include <libbdk-hal/bdk-utils.h>
+#include <libbdk-hal/bdk-l2c.h>
+#include <libdram/libdram-config.h>
+
+size_t sdram_size_mb(void)
+{
+ return bdk_dram_get_size_mbytes(0);
+}
+
+/* based on bdk_boot_dram() */
+void sdram_init(void)
+{
+ printk(BIOS_DEBUG, "Initializing DRAM\n");
+
+ /**
+ * FIXME: second arg is actually a desired frequency if set (the
+ * function usually obtains frequency via the config). That might
+ * be useful if FDT or u-boot env is too cumbersome.
+ */
+ int mbytes = bdk_dram_config(0, 0);
+ if (mbytes < 0) {
+ bdk_error("N0: Failed DRAM init\n");
+ die("DRAM INIT FAILED !\n");
+ }
+
+ /* Poke the watchdog */
+ bdk_watchdog_poke();
+
+ /* Report DRAM status */
+ printf("N0: DRAM:%s\n", bdk_dram_get_info_string(0));
+
+ /* See if we should test this node's DRAM during boot */
+ int test_dram = bdk_config_get_int(BDK_CONFIG_DRAM_BOOT_TEST, 0);
+ if (test_dram) {
+ /* Run the address test to make sure DRAM works */
+ if (bdk_dram_test(13, 0, 0x10000000000ull, BDK_DRAM_TEST_NO_STATS | (1<<0))) {
+ /**
+ * FIXME(dhendrix): This should be handled by mainboard code since we
+ * don't necessarily have a BMC to report to. Also, we need to figure out
+ * if we need to keep going as to avoid getting into a boot loop.
+ */
+ // bdk_boot_status(BDK_BOOT_STATUS_REQUEST_POWER_CYCLE);
+ printk(BIOS_ERR, "%s: Failed DRAM test.\n", __func__);
+ }
+ bdk_watchdog_poke();
+ /* Put other node core back in reset */
+ if (0 != bdk_numa_master())
+ BDK_CSR_WRITE(0, BDK_RST_PP_RESET, -1);
+ /* Clear DRAM */
+ uint64_t skip = 0;
+ if (0 == bdk_numa_master())
+ skip = bdk_dram_get_top_of_bdk();
+ void *base = bdk_phys_to_ptr(bdk_numa_get_address(0, skip));
+ bdk_zero_memory(base, ((uint64_t)mbytes << 20) - skip);
+ bdk_watchdog_poke();
+ }
+
+ /* Unlock L2 now that DRAM works */
+ if (0 == bdk_numa_master()) {
+ uint64_t l2_size = bdk_l2c_get_cache_size_bytes(0);
+ BDK_TRACE(INIT, "Unlocking L2\n");
+ bdk_l2c_unlock_mem_region(0, 0, l2_size);
+ bdk_watchdog_poke();
+ }
+
+ printk(BIOS_INFO, "SDRAM initialization finished.\n");
+}
diff --git a/src/soc/cavium/cn81xx/soc.c b/src/soc/cavium/cn81xx/soc.c
new file mode 100644
index 0000000000..03f9122404
--- /dev/null
+++ b/src/soc/cavium/cn81xx/soc.c
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <bootmode.h>
+#include <console/console.h>
+#include <cpu/cpu.h>
+#include <device/device.h>
+#include <soc/addressmap.h>
+#include <soc/clock.h>
+#include <soc/sdram.h>
+#include <soc/timer.h>
+#include <stddef.h>
+#include <stdlib.h>
+#include <string.h>
+#include <symbols.h>
+#include <libbdk-boot/bdk-boot.h>
+
+static void soc_read_resources(device_t dev)
+{
+ ram_resource(dev, 0, (uintptr_t)_dram / KiB, sdram_size_mb() * KiB);
+}
+
+static void soc_init(device_t dev)
+{
+ /* Init ECAM, MDIO, PEM, PHY, QLM ... */
+ bdk_boot();
+
+ /* TODO: additional trustzone init */
+}
+
+static void soc_final(device_t dev)
+{
+ watchdog_disable(0);
+}
+
+static struct device_operations soc_ops = {
+ .read_resources = soc_read_resources,
+ .init = soc_init,
+ .final = soc_final,
+};
+
+static void enable_soc_dev(device_t dev)
+{
+ dev->ops = &soc_ops;
+}
+
+struct chip_operations soc_cavium_cn81xx_ops = {
+ CHIP_NAME("SOC Cavium CN81XX")
+ .enable_dev = enable_soc_dev,
+};
diff --git a/src/soc/cavium/cn81xx/spi.c b/src/soc/cavium/cn81xx/spi.c
new file mode 100644
index 0000000000..5a5865e36e
--- /dev/null
+++ b/src/soc/cavium/cn81xx/spi.c
@@ -0,0 +1,401 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <arch/io.h>
+#include <assert.h>
+#include <console/console.h>
+#include <delay.h>
+#include <endian.h>
+#include <soc/addressmap.h>
+#include <soc/spi.h>
+#include <soc/clock.h>
+#include <spi-generic.h>
+#include <spi_flash.h>
+#include <stdlib.h>
+#include <timer.h>
+
+union cavium_spi_cfg {
+ u64 u;
+ struct {
+ u64 enable : 1;
+ u64 idlelow : 1;
+ u64 clk_cont : 1;
+ u64 wireor : 1;
+ u64 lsbfirst : 1;
+ u64 : 2;
+ u64 cshi : 1;
+ u64 idleclks : 2;
+ u64 tristate : 1;
+ u64 cslate : 1;
+ u64 csena : 4; /* Must be one */
+ u64 clkdiv : 13;
+ u64 : 35;
+ } s;
+};
+
+union cavium_spi_sts {
+ u64 u;
+ struct {
+ u64 busy : 1;
+ u64 mpi_intr : 1;
+ u64 : 6;
+ u64 rxnum : 5;
+ u64 : 51;
+ } s;
+};
+
+union cavium_spi_tx {
+ u64 u;
+ struct {
+ u64 totnum : 5;
+ u64 : 3;
+ u64 txnum : 5;
+ u64 : 3;
+ u64 leavecs : 1;
+ u64 : 3;
+ u64 csid : 2;
+ u64 : 42;
+ } s;
+};
+
+struct cavium_spi {
+ union cavium_spi_cfg cfg;
+ union cavium_spi_sts sts;
+ union cavium_spi_tx tx;
+ u64 rsvd1;
+ u64 sts_w1s;
+ u64 rsvd2;
+ u64 int_ena_w1c;
+ u64 int_ena_w1s;
+ u64 wide_dat;
+ u8 rsvd4[0x38];
+ u64 dat[8];
+};
+
+check_member(cavium_spi, cfg, 0);
+check_member(cavium_spi, sts, 0x8);
+check_member(cavium_spi, tx, 0x10);
+check_member(cavium_spi, dat[7], 0xb8);
+
+struct cavium_spi_slave {
+ struct cavium_spi *regs;
+ int cs;
+};
+
+#define SPI_TIMEOUT_US 5000
+
+static struct cavium_spi_slave cavium_spi_slaves[] = {
+ {
+ .regs = (struct cavium_spi *)MPI_PF_BAR0,
+ .cs = 0,
+ },
+};
+
+static struct cavium_spi_slave *to_cavium_spi(const struct spi_slave *slave)
+{
+ assert(slave->bus < ARRAY_SIZE(cavium_spi_slaves));
+ return &cavium_spi_slaves[slave->bus];
+}
+
+/**
+ * Enable the SPI controller. Pins are driven.
+ *
+ * @param bus The SPI bus to operate on
+ */
+void spi_enable(const size_t bus)
+{
+ union cavium_spi_cfg cfg;
+
+ assert(bus < ARRAY_SIZE(cavium_spi_slaves));
+ if (bus >= ARRAY_SIZE(cavium_spi_slaves))
+ return;
+
+ struct cavium_spi *regs = cavium_spi_slaves[bus].regs;
+
+ cfg.u = read64(&regs->cfg);
+ cfg.s.csena = 0xf;
+ cfg.s.enable = 1;
+ write64(&regs->cfg, cfg.u);
+}
+
+/**
+ * Disable the SPI controller. Pins are tristated.
+ *
+ * @param bus The SPI bus to operate on
+ */
+void spi_disable(const size_t bus)
+{
+ union cavium_spi_cfg cfg;
+
+ assert(bus < ARRAY_SIZE(cavium_spi_slaves));
+ if (bus >= ARRAY_SIZE(cavium_spi_slaves))
+ return;
+
+ struct cavium_spi *regs = cavium_spi_slaves[bus].regs;
+
+ cfg.u = read64(&regs->cfg);
+ cfg.s.csena = 0xf;
+ cfg.s.enable = 0;
+ write64(&regs->cfg, cfg.u);
+}
+
+/**
+ * Set SPI Chip select line and level if asserted.
+ *
+ * @param bus The SPI bus to operate on
+ * @param chip_select The chip select pin to use (0 - 3)
+ * @param assert_is_low CS pin state is low when asserted
+ */
+void spi_set_cs(const size_t bus,
+ const size_t chip_select,
+ const size_t assert_is_low)
+{
+ union cavium_spi_cfg cfg;
+
+ assert(bus < ARRAY_SIZE(cavium_spi_slaves));
+ if (bus >= ARRAY_SIZE(cavium_spi_slaves))
+ return;
+
+ cavium_spi_slaves[bus].cs = chip_select & 0x3;
+ struct cavium_spi *regs = cavium_spi_slaves[bus].regs;
+
+ cfg.u = read64(&regs->cfg);
+ cfg.s.csena = 0xf;
+ cfg.s.cshi = !assert_is_low;
+ write64(&regs->cfg, cfg.u);
+
+ //FIXME: CS2/3: Change pin mux here
+}
+
+/**
+ * Set SPI clock frequency.
+ *
+ * @param bus The SPI bus to operate on
+ * @param speed_hz The SPI frequency in Hz
+ * @param idle_low The SPI clock idles low
+ * @param idle_cycles Number of CLK cycles between two commands (0 - 3)
+
+ */
+void spi_set_clock(const size_t bus,
+ const size_t speed_hz,
+ const size_t idle_low,
+ const size_t idle_cycles)
+{
+ union cavium_spi_cfg cfg;
+
+ assert(bus < ARRAY_SIZE(cavium_spi_slaves));
+ if (bus >= ARRAY_SIZE(cavium_spi_slaves))
+ return;
+
+ struct cavium_spi *regs = cavium_spi_slaves[bus].regs;
+ const uint64_t sclk = thunderx_get_io_clock();
+
+ cfg.u = read64(&regs->cfg);
+ cfg.s.csena = 0xf;
+ cfg.s.clk_cont = 0;
+ cfg.s.idlelow = !!idle_low;
+ cfg.s.idleclks = idle_cycles & 0x3;
+ cfg.s.clkdiv = MIN(sclk / (2ULL * speed_hz), 0x1fff);
+ write64(&regs->cfg, cfg.u);
+
+ printk(BIOS_DEBUG, "SPI: set clock to %lld kHz\n",
+ (sclk / (2ULL * cfg.s.clkdiv)) >> 10);
+}
+
+/**
+ * Set SPI LSB/MSB first.
+ *
+ * @param bus The SPI bus to operate on
+ * @param lsb_first The SPI operates LSB first
+ *
+ */
+void spi_set_lsbmsb(const size_t bus, const size_t lsb_first)
+{
+ union cavium_spi_cfg cfg;
+
+ assert(bus < ARRAY_SIZE(cavium_spi_slaves));
+ if (bus >= ARRAY_SIZE(cavium_spi_slaves))
+ return;
+
+ struct cavium_spi *regs = cavium_spi_slaves[bus].regs;
+
+ cfg.u = read64(&regs->cfg);
+ cfg.s.csena = 0xf;
+ cfg.s.lsbfirst = !!lsb_first;
+ write64(&regs->cfg, cfg.u);
+}
+
+/**
+ * Init SPI with custom parameters and enable SPI controller.
+ *
+ * @param bus The SPI bus to operate on
+ * @param speed_hz The SPI frequency in Hz
+ * @param idle_low The SPI clock idles low
+ * @param idle_cycles Number of CLK cycles between two commands (0 - 3)
+ * @param lsb_first The SPI operates LSB first
+ * @param chip_select The chip select pin to use (0 - 3)
+ * @param assert_is_low CS pin state is low when asserted
+ */
+void spi_init_custom(const size_t bus,
+ const size_t speed_hz,
+ const size_t idle_low,
+ const size_t idle_cycles,
+ const size_t lsb_first,
+ const size_t chip_select,
+ const size_t assert_is_low)
+{
+ spi_disable(bus);
+ spi_set_clock(bus, speed_hz, idle_low, idle_cycles);
+ spi_set_lsbmsb(bus, lsb_first);
+ spi_set_cs(bus, chip_select, assert_is_low);
+ spi_enable(bus);
+}
+
+/**
+ * Init all SPI controllers with default values and enable all SPI controller.
+ *
+ */
+void spi_init(void)
+{
+ for (size_t i = 0; i < ARRAY_SIZE(cavium_spi_slaves); i++) {
+ spi_disable(i);
+ spi_set_clock(i, 12500000, 0, 0);
+ spi_set_lsbmsb(i, 0);
+ spi_set_cs(i, 0, 1);
+ spi_enable(i);
+ }
+}
+
+static int cavium_spi_wait(struct cavium_spi *regs)
+{
+ struct stopwatch sw;
+ union cavium_spi_sts sts;
+
+ stopwatch_init_usecs_expire(&sw, SPI_TIMEOUT_US);
+ do {
+ sts.u = read64(&regs->sts);
+ if (!sts.s.busy)
+ return 0;
+ } while (!stopwatch_expired(&sw));
+ printk(BIOS_DEBUG, "SPI: Timed out after %uus\n", SPI_TIMEOUT_US);
+ return -1;
+}
+
+static int do_xfer(const struct spi_slave *slave, struct spi_op *vector,
+ int leavecs)
+{
+ struct cavium_spi *regs = to_cavium_spi(slave)->regs;
+ uint8_t *out_buf = (uint8_t *)vector->dout;
+ size_t bytesout = vector->bytesout;
+ uint8_t *in_buf = (uint8_t *)vector->din;
+ size_t bytesin = vector->bytesin;
+ union cavium_spi_sts sts;
+ union cavium_spi_tx tx;
+
+ /**
+ * The CN81xx SPI controller is half-duplex and has 8 data registers.
+ * If >8 bytes remain in the transfer then we must set LEAVECS = 1 so
+ * that the /CS remains asserted. Once <=8 bytes remain we must set
+ * LEAVECS = 0 so that /CS is de-asserted, thus completing the transfer.
+ */
+ while (bytesout) {
+ size_t out_now = MIN(bytesout, 8);
+ unsigned int i;
+
+ for (i = 0; i < out_now; i++)
+ write64(&regs->dat[i], out_buf[i] & 0xff);
+
+ tx.u = 0;
+ tx.s.csid = to_cavium_spi(slave)->cs;
+ if (leavecs || ((bytesout > 8) || bytesin))
+ tx.s.leavecs = 1;
+ /* number of bytes to transmit goes in both TXNUM and TOTNUM */
+ tx.s.totnum = out_now;
+ tx.s.txnum = out_now;
+ write64(&regs->tx, tx.u);
+
+ /* check status */
+ if (cavium_spi_wait(regs) < 0)
+ return -1;
+
+ bytesout -= out_now;
+ out_buf += out_now;
+ }
+
+ while (bytesin) {
+ size_t in_now = MIN(bytesin, 8);
+ unsigned int i;
+
+ tx.u = 0;
+ tx.s.csid = to_cavium_spi(slave)->cs;
+ if (leavecs || (bytesin > 8))
+ tx.s.leavecs = 1;
+ tx.s.totnum = in_now;
+ write64(&regs->tx, tx.u);
+
+ /* check status */
+ if (cavium_spi_wait(regs) < 0)
+ return -1;
+
+ sts.u = read64(&regs->sts);
+ if (sts.s.rxnum != in_now) {
+ printk(BIOS_ERR,
+ "SPI: Incorrect number of bytes received: %u.\n",
+ sts.s.rxnum);
+ return -1;
+ }
+
+ for (i = 0; i < in_now; i++) {
+ *in_buf = (uint8_t)((read64(&regs->dat[i]) & 0xff));
+ in_buf++;
+ }
+ bytesin -= in_now;
+ }
+
+ return 0;
+}
+
+static int spi_ctrlr_xfer_vector(const struct spi_slave *slave,
+ struct spi_op vectors[], size_t count)
+{
+ int i;
+
+ for (i = 0; i < count; i++) {
+ if (do_xfer(slave, &vectors[i], count - 1 == i ? 0 : 1)) {
+ printk(BIOS_ERR,
+ "SPI: Failed to transfer %zu vectors.\n", count);
+ return -1;
+ }
+ }
+
+ return 0;
+}
+static const struct spi_ctrlr spi_ctrlr = {
+
+ .xfer_vector = spi_ctrlr_xfer_vector,
+ .max_xfer_size = SPI_CTRLR_DEFAULT_MAX_XFER_SIZE,
+};
+
+const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
+ {
+ .ctrlr = &spi_ctrlr,
+ .bus_start = 0,
+ .bus_end = ARRAY_SIZE(cavium_spi_slaves) - 1,
+ },
+};
+const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);
diff --git a/src/soc/cavium/cn81xx/timer.c b/src/soc/cavium/cn81xx/timer.c
new file mode 100644
index 0000000000..0321a49ad9
--- /dev/null
+++ b/src/soc/cavium/cn81xx/timer.c
@@ -0,0 +1,226 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <arch/io.h>
+#include <console/console.h>
+#include <inttypes.h>
+#include <soc/clock.h>
+#include <soc/timer.h>
+#include <stdint.h>
+#include <timer.h>
+#include <soc/addressmap.h>
+#include <assert.h>
+
+/* Global System Timers Unit (GTI) registers */
+struct cn81xx_timer {
+ u32 cc_cntcr;
+ u32 cc_cntsr;
+ u64 cc_cntcv;
+ u8 rsvd[0x10];
+ u32 cc_cntfid0;
+ u32 cc_cntfid1;
+ u8 rsvd2[0x98];
+ u32 cc_cntrate;
+ u32 cc_cntracc;
+ u64 cc_cntadd;
+ u64 cc_cntmb;
+ u64 cc_cntmbts;
+ u64 cc_cntmb_int;
+ u64 cc_cntmb_int_set;
+ u64 cc_cntmb_int_ena_clr;
+ u64 cc_cntmb_int_ena_set;
+ u64 cc_imp_ctl;
+ u8 skip[0x1fef8];
+ u32 ctl_cntfrq;
+ u32 ctl_cntnsar;
+ u32 ctl_cnttidr;
+ u8 rsvd3[0x34];
+ u32 ctl_cntacr0;
+ u8 skip2[0x1ffb8];
+ u64 cwd_wdog[48]; /* Offset 0x40000 */
+ u8 skip3[0xfe80];
+ u64 cwd_poke[48]; /* Offset 0x50000 */
+};
+
+check_member(cn81xx_timer, cc_imp_ctl, 0x100);
+check_member(cn81xx_timer, ctl_cntacr0, 0x20040);
+check_member(cn81xx_timer, cwd_wdog[0], 0x40000);
+check_member(cn81xx_timer, cwd_poke[0], 0x50000);
+
+
+#define GTI_CC_CNTCR_EN (1 << 0)
+#define GTI_CC_CNTCR_HDBG (1 << 1)
+#define GTI_CC_CNTCR_FCREQ (1 << 8)
+
+#define GTI_CC_CNTSR_DBGH (1 << 1)
+#define GTI_CC_CNTSR_FCACK (1 << 8)
+
+#define GTI_CWD_WDOG_MODE_SHIFT 0
+#define GTI_CWD_WDOG_MODE_MASK 0x3
+#define GTI_CWD_WDOG_STATE_SHIFT 2
+#define GTI_CWD_WDOG_STATE_MASK 0x3
+#define GTI_CWD_WDOG_LEN_SHIFT 4
+#define GTI_CWD_WDOG_LEN_MASK 0xffff
+#define GTI_CWD_WDOG_CNT_SHIFT 20
+#define GTI_CWD_WDOG_CNT_MASK 0xffffff
+#define GTI_CWD_WDOC_DSTOP (1 << 44)
+#define GTI_CWD_WDOC_GSTOP (1 << 45)
+
+static uint64_t timer_raw_value(void)
+{
+ struct cn81xx_timer *timer = (void *)GTI_PF_BAR0;
+
+ return read64(&timer->cc_cntcv);
+}
+
+/**
+ * Get GTI counter value.
+ * @param mt Structure to fill
+ */
+void timer_monotonic_get(struct mono_time *mt)
+{
+ mono_time_set_usecs(mt, timer_raw_value());
+}
+
+/**
+ * Init Global System Timers Unit (GTI).
+ * Configure timer to run at 1MHz tick-rate.
+ */
+void init_timer(void)
+{
+ struct cn81xx_timer *gti = (struct cn81xx_timer *)GTI_PF_BAR0;
+
+ /* Check if the counter was already setup */
+ if (gti->cc_cntcr & GTI_CC_CNTCR_EN)
+ return;
+
+ u64 sclk = thunderx_get_io_clock();
+
+ /* Use coprocessor clock source */
+ write32(&gti->cc_imp_ctl, 0);
+
+ /* Setup counter to operate at 1MHz */
+ const size_t tickrate = 1000000;
+ write32(&gti->cc_cntfid0, tickrate);
+ write32(&gti->ctl_cntfrq, tickrate);
+ write32(&gti->cc_cntrate, ((1ULL << 32) * tickrate) / sclk);
+
+ /* Enable the counter */
+ setbits_le32(&gti->cc_cntcr, GTI_CC_CNTCR_EN);
+
+ //u32 u = (CNTPS_CTL_EL1_IMASK | CNTPS_CTL_EL1_EN);
+ //BDK_MSR(CNTPS_CTL_EL1, u);
+}
+
+/**
+ * Setup the watchdog to expire in timeout_ms milliseconds. When the watchdog
+ * expires, the chip three things happen:
+ * 1) Expire 1: interrupt that is ignored by the BDK
+ * 2) Expire 2: DEL3T interrupt, which is disabled and ignored
+ * 3) Expire 3: Soft reset of the chip
+ *
+ * Since we want a soft reset, we actually program the watchdog to expire at
+ * the timeout / 3.
+ *
+ * @param index Index of watchdog to configure
+ * @param timeout_ms Timeout in milliseconds.
+ */
+void watchdog_set(const size_t index, unsigned int timeout_ms)
+{
+ uint64_t sclk = thunderx_get_io_clock();
+ uint64_t timeout_sclk = sclk * timeout_ms / 1000;
+ struct cn81xx_timer *timer = (struct cn81xx_timer *)GTI_PF_BAR0;
+
+ assert(index < ARRAY_SIZE(timer->cwd_wdog));
+ if (index >= ARRAY_SIZE(timer->cwd_wdog))
+ return;
+
+ /*
+ * Per comment above, we want the watchdog to expire at 3x the rate
+ * specified
+ */
+ timeout_sclk /= 3;
+ /* Watchdog counts in 1024 cycle steps */
+ uint64_t timeout_wdog = timeout_sclk >> 10;
+ /* We can only specify the upper 16 bits of a 24 bit value. Round up */
+ timeout_wdog = (timeout_wdog + 0xff) >> 8;
+ /* If the timeout overflows the hardware limit, set max */
+ if (timeout_wdog >= 0x10000)
+ timeout_wdog = 0xffff;
+
+ printk(BIOS_DEBUG, "Watchdog: Set to expire %llu SCLK cycles\n",
+ timeout_wdog << 18);
+ clrsetbits_le64(&timer->cwd_wdog[index],
+ (GTI_CWD_WDOG_LEN_MASK << GTI_CWD_WDOG_LEN_SHIFT) |
+ (GTI_CWD_WDOG_MODE_MASK << GTI_CWD_WDOG_MODE_SHIFT),
+ (timeout_wdog << GTI_CWD_WDOG_LEN_SHIFT) |
+ (3 << GTI_CWD_WDOG_MODE_SHIFT));
+}
+
+/**
+ * Signal the watchdog that we are still running.
+ *
+ * @param index Index of watchdog to configure.
+ */
+void watchdog_poke(const size_t index)
+{
+ struct cn81xx_timer *timer = (struct cn81xx_timer *)GTI_PF_BAR0;
+
+ assert(index < ARRAY_SIZE(timer->cwd_poke));
+ if (index >= ARRAY_SIZE(timer->cwd_poke))
+ return;
+
+ write64(&timer->cwd_poke[0], 0);
+}
+
+/**
+ * Disable the hardware watchdog
+ *
+ * @param index Index of watchdog to configure.
+ */
+void watchdog_disable(const size_t index)
+{
+ struct cn81xx_timer *timer = (struct cn81xx_timer *)GTI_PF_BAR0;
+
+ assert(index < ARRAY_SIZE(timer->cwd_wdog));
+ if (index >= ARRAY_SIZE(timer->cwd_wdog))
+ return;
+
+ write64(&timer->cwd_wdog[index], 0);
+ printk(BIOS_DEBUG, "Watchdog: Disabled\n");
+}
+
+/**
+ * Return true if the watchdog is configured and running
+ *
+ * @param index Index of watchdog to configure.
+ *
+ * @return Non-zero if watchdog is running.
+ */
+int watchdog_is_running(const size_t index)
+{
+ struct cn81xx_timer *timer = (struct cn81xx_timer *)GTI_PF_BAR0;
+
+ assert(index < ARRAY_SIZE(timer->cwd_wdog));
+ if (index >= ARRAY_SIZE(timer->cwd_wdog))
+ return 0;
+
+ uint64_t val = read64(&timer->cwd_wdog[index]);
+
+ return !!(val & (GTI_CWD_WDOG_MODE_MASK << GTI_CWD_WDOG_MODE_SHIFT));
+}
diff --git a/src/soc/cavium/cn81xx/twsi.c b/src/soc/cavium/cn81xx/twsi.c
new file mode 100644
index 0000000000..e86cac7c8d
--- /dev/null
+++ b/src/soc/cavium/cn81xx/twsi.c
@@ -0,0 +1,696 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+#include <console/console.h>
+#include <soc/twsi.h>
+#include <soc/clock.h>
+#include <device/i2c.h>
+#include <device/i2c_simple.h>
+#include <assert.h>
+#include <delay.h>
+#include <arch/io.h>
+#include <soc/addressmap.h>
+
+#define TWSI_THP 24
+
+#define TWSI_SW_TWSI 0x1000
+#define TWSI_TWSI_SW 0x1008
+#define TWSI_INT 0x1010
+#define TWSI_SW_TWSI_EXT 0x1018
+
+union twsx_sw_twsi {
+ u64 u;
+ struct {
+ u64 data:32;
+ u64 eop_ia:3;
+ u64 ia:5;
+ u64 addr:10;
+ u64 scr:2;
+ u64 size:3;
+ u64 sovr:1;
+ u64 r:1;
+ u64 op:4;
+ u64 eia:1;
+ u64 slonly:1;
+ u64 v:1;
+ } s;
+};
+
+union twsx_sw_twsi_ext {
+ u64 u;
+ struct {
+ u64 data:32;
+ u64 ia:8;
+ u64 :24;
+ } s;
+};
+
+union twsx_int {
+ u64 u;
+ struct {
+ u64 st_int:1; /** TWSX_SW_TWSI register update int */
+ u64 ts_int:1; /** TWSX_TWSI_SW register update int */
+ u64 core_int:1; /** TWSI core interrupt, ignored for HLC */
+ u64 :5; /** Reserved */
+ u64 sda_ovr:1; /** SDA testing override */
+ u64 scl_ovr:1; /** SCL testing override */
+ u64 sda:1; /** SDA signal */
+ u64 scl:1; /** SCL signal */
+ u64 :52; /** Reserved */
+ } s;
+};
+
+enum {
+ TWSI_OP_WRITE = 0,
+ TWSI_OP_READ = 1,
+};
+
+enum {
+ TWSI_EOP_SLAVE_ADDR = 0,
+ TWSI_EOP_CLK_CTL = 3,
+ TWSI_SW_EOP_IA = 6,
+};
+
+enum {
+ TWSI_SLAVEADD = 0,
+ TWSI_DATA = 1,
+ TWSI_CTL = 2,
+ TWSI_CLKCTL = 3,
+ TWSI_STAT = 3,
+ TWSI_SLAVEADD_EXT = 4,
+ TWSI_RST = 7,
+};
+
+enum {
+ TWSI_CTL_AAK = (1 << 2),
+ TWSI_CTL_IFLG = (1 << 3),
+ TWSI_CTL_STP = (1 << 4),
+ TWSI_CTL_STA = (1 << 5),
+ TWSI_CTL_ENAB = (1 << 6),
+ TWSI_CTL_CE = (1 << 7),
+};
+
+enum {
+ /** Bus error */
+ TWSI_STAT_BUS_ERROR = 0x00,
+ /** Start condition transmitted */
+ TWSI_STAT_START = 0x08,
+ /** Repeat start condition transmitted */
+ TWSI_STAT_RSTART = 0x10,
+ /** Address + write bit transmitted, ACK received */
+ TWSI_STAT_TXADDR_ACK = 0x18,
+ /** Address + write bit transmitted, /ACK received */
+ TWSI_STAT_TXADDR_NAK = 0x20,
+ /** Data byte transmitted in master mode, ACK received */
+ TWSI_STAT_TXDATA_ACK = 0x28,
+ /** Data byte transmitted in master mode, ACK received */
+ TWSI_STAT_TXDATA_NAK = 0x30,
+ /** Arbitration lost in address or data byte */
+ TWSI_STAT_TX_ARB_LOST = 0x38,
+ /** Address + read bit transmitted, ACK received */
+ TWSI_STAT_RXADDR_ACK = 0x40,
+ /** Address + read bit transmitted, /ACK received */
+ TWSI_STAT_RXADDR_NAK = 0x48,
+ /** Data byte received in master mode, ACK transmitted */
+ TWSI_STAT_RXDATA_ACK_SENT = 0x50,
+ /** Data byte received, NACK transmitted */
+ TWSI_STAT_RXDATA_NAK_SENT = 0x58,
+ /** Slave address received, sent ACK */
+ TWSI_STAT_SLAVE_RXADDR_ACK = 0x60,
+ /**
+ * Arbitration lost in address as master, slave address + write bit
+ * received, ACK transmitted
+ */
+ TWSI_STAT_TX_ACK_ARB_LOST = 0x68,
+ /** General call address received, ACK transmitted */
+ TWSI_STAT_RX_GEN_ADDR_ACK = 0x70,
+ /**
+ * Arbitration lost in address as master, general call address
+ * received, ACK transmitted
+ */
+ TWSI_STAT_RX_GEN_ADDR_ARB_LOST = 0x78,
+ /** Data byte received after slave address received, ACK transmitted */
+ TWSI_STAT_SLAVE_RXDATA_ACK = 0x80,
+ /** Data byte received after slave address received, /ACK transmitted */
+ TWSI_STAT_SLAVE_RXDATA_NAK = 0x88,
+ /**
+ * Data byte received after general call address received, ACK
+ * transmitted
+ */
+ TWSI_STAT_GEN_RXADDR_ACK = 0x90,
+ /**
+ * Data byte received after general call address received, /ACK
+ * transmitted
+ */
+ TWSI_STAT_GEN_RXADDR_NAK = 0x98,
+ /** STOP or repeated START condition received in slave mode */
+ TWSI_STAT_STOP_MULTI_START = 0xA0,
+ /** Slave address + read bit received, ACK transmitted */
+ TWSI_STAT_SLAVE_RXADDR2_ACK = 0xA8,
+ /**
+ * Arbitration lost in address as master, slave address + read bit
+ * received, ACK transmitted
+ */
+ TWSI_STAT_RXDATA_ACK_ARB_LOST = 0xB0,
+ /** Data byte transmitted in slave mode, ACK received */
+ TWSI_STAT_SLAVE_TXDATA_ACK = 0xB8,
+ /** Data byte transmitted in slave mode, /ACK received */
+ TWSI_STAT_SLAVE_TXDATA_NAK = 0xC0,
+ /** Last byte transmitted in slave mode, ACK received */
+ TWSI_STAT_SLAVE_TXDATA_END_ACK = 0xC8,
+ /** Second address byte + write bit transmitted, ACK received */
+ TWSI_STAT_TXADDR2DATA_ACK = 0xD0,
+ /** Second address byte + write bit transmitted, /ACK received */
+ TWSI_STAT_TXADDR2DATA_NAK = 0xD8,
+ /** No relevant status information */
+ TWSI_STAT_IDLE = 0xF8
+};
+
+/**
+ * Returns true if we lost arbitration
+ *
+ * @param code status code
+ * @param final_read true if this is the final read operation
+ *
+ * @return true if arbitration has been lost, false if it hasn't been lost.
+ */
+static int twsi_i2c_lost_arb(u8 code, int final_read)
+{
+ switch (code) {
+ /* Arbitration lost */
+ case TWSI_STAT_TX_ARB_LOST:
+ case TWSI_STAT_TX_ACK_ARB_LOST:
+ case TWSI_STAT_RX_GEN_ADDR_ARB_LOST:
+ case TWSI_STAT_RXDATA_ACK_ARB_LOST:
+ return -1;
+
+ /* Being addressed as slave, should back off and listen */
+ case TWSI_STAT_SLAVE_RXADDR_ACK:
+ case TWSI_STAT_RX_GEN_ADDR_ACK:
+ case TWSI_STAT_GEN_RXADDR_ACK:
+ case TWSI_STAT_GEN_RXADDR_NAK:
+ return -1;
+
+ /* Core busy as slave */
+ case TWSI_STAT_SLAVE_RXDATA_ACK:
+ case TWSI_STAT_SLAVE_RXDATA_NAK:
+ case TWSI_STAT_STOP_MULTI_START:
+ case TWSI_STAT_SLAVE_RXADDR2_ACK:
+ case TWSI_STAT_SLAVE_TXDATA_ACK:
+ case TWSI_STAT_SLAVE_TXDATA_NAK:
+ case TWSI_STAT_SLAVE_TXDATA_END_ACK:
+ return -1;
+
+ /* Ack allowed on pre-terminal bytes only */
+ case TWSI_STAT_RXDATA_ACK_SENT:
+ if (!final_read)
+ return 0;
+ return -1;
+
+ /* NAK allowed on terminal byte only */
+ case TWSI_STAT_RXDATA_NAK_SENT:
+ if (!final_read)
+ return 0;
+ return -1;
+
+ case TWSI_STAT_TXDATA_NAK:
+ case TWSI_STAT_TXADDR_NAK:
+ case TWSI_STAT_RXADDR_NAK:
+ case TWSI_STAT_TXADDR2DATA_NAK:
+ return -1;
+ }
+ return 0;
+}
+
+#define RST_BOOT_PNR_MUL(Val) ((Val >> 33) & 0x1F)
+
+/**
+ * Writes to the MIO_TWS(0..5)_SW_TWSI register
+ *
+ * @param baseaddr Base address of i2c registers
+ * @param sw_twsi value to write
+ *
+ * @return 0 for success, otherwise error
+ */
+static u64 twsi_write_sw(void *baseaddr, union twsx_sw_twsi sw_twsi)
+{
+ unsigned long timeout = 500000;
+
+ sw_twsi.s.r = 0;
+ sw_twsi.s.v = 1;
+
+ printk(BIOS_SPEW, "%s(%p, 0x%llx)\n", __func__, baseaddr, sw_twsi.u);
+ write64(baseaddr + TWSI_SW_TWSI, sw_twsi.u);
+ do {
+ sw_twsi.u = read64(baseaddr + TWSI_SW_TWSI);
+ timeout--;
+ } while (sw_twsi.s.v != 0 && timeout > 0);
+
+ if (sw_twsi.s.v)
+ printk(BIOS_ERR, "%s: timed out\n", __func__);
+ return sw_twsi.u;
+}
+
+/**
+ * Reads the MIO_TWS(0..5)_SW_TWSI register
+ *
+ * @param baseaddr Base address of i2c registers
+ * @param sw_twsi value for eia and op, etc. to read
+ *
+ * @return value of the register
+ */
+static u64 twsi_read_sw(void *baseaddr, union twsx_sw_twsi sw_twsi)
+{
+ unsigned long timeout = 500000;
+ sw_twsi.s.r = 1;
+ sw_twsi.s.v = 1;
+
+ printk(BIOS_SPEW, "%s(%p, 0x%llx)\n", __func__, baseaddr, sw_twsi.u);
+ write64(baseaddr + TWSI_SW_TWSI, sw_twsi.u);
+
+ do {
+ sw_twsi.u = read64(baseaddr + TWSI_SW_TWSI);
+ timeout--;
+ } while (sw_twsi.s.v != 0 && timeout > 0);
+
+ if (sw_twsi.s.v)
+ printk(BIOS_ERR, "%s: Error writing 0x%llx\n", __func__,
+ sw_twsi.u);
+
+ printk(BIOS_SPEW, "%s: Returning 0x%llx\n", __func__, sw_twsi.u);
+ return sw_twsi.u;
+}
+
+/**
+ * Write control register
+ *
+ * @param baseaddr Base address for i2c registers
+ * @param data data to write
+ */
+static void twsi_write_ctl(void *baseaddr, const u8 data)
+{
+ union twsx_sw_twsi twsi_sw;
+
+ printk(BIOS_SPEW, "%s(%p, 0x%x)\n", __func__, baseaddr, data);
+ twsi_sw.u = 0;
+
+ twsi_sw.s.op = TWSI_SW_EOP_IA;
+ twsi_sw.s.eop_ia = TWSI_CTL;
+ twsi_sw.s.data = data;
+
+ twsi_write_sw(baseaddr, twsi_sw);
+}
+
+/**
+ * Reads the TWSI Control Register
+ *
+ * @param[in] baseaddr Base address for i2c
+ *
+ * @return 8-bit TWSI control register
+ */
+static u32 twsi_read_ctl(void *baseaddr)
+{
+ union twsx_sw_twsi sw_twsi;
+
+ sw_twsi.u = 0;
+ sw_twsi.s.op = TWSI_SW_EOP_IA;
+ sw_twsi.s.eop_ia = TWSI_CTL;
+
+ sw_twsi.u = twsi_read_sw(baseaddr, sw_twsi);
+ printk(BIOS_SPEW, "%s(%p): 0x%x\n", __func__, baseaddr, sw_twsi.s.data);
+ return sw_twsi.s.data;
+}
+
+/**
+ * Read i2c status register
+ *
+ * @param baseaddr Base address of i2c registers
+ *
+ * @return value of status register
+ */
+static u8 twsi_read_status(void *baseaddr)
+{
+ union twsx_sw_twsi twsi_sw;
+
+ twsi_sw.u = 0;
+ twsi_sw.s.op = TWSI_SW_EOP_IA;
+ twsi_sw.s.eop_ia = TWSI_STAT;
+
+ return twsi_read_sw(baseaddr, twsi_sw);
+}
+
+/**
+ * Waits for an i2c operation to complete
+ *
+ * @param baseaddr Base address of registers
+ *
+ * @return 0 for success, 1 if timeout
+ */
+static int twsi_wait(void *baseaddr)
+{
+ unsigned long timeout = 500000;
+ u8 twsi_ctl;
+
+ printk(BIOS_SPEW, "%s(%p)\n", __func__, baseaddr);
+ do {
+ twsi_ctl = twsi_read_ctl(baseaddr);
+ twsi_ctl &= TWSI_CTL_IFLG;
+ timeout--;
+ } while (!twsi_ctl && timeout > 0);
+
+ printk(BIOS_SPEW, " return: %u\n", !twsi_ctl);
+ return !twsi_ctl;
+}
+
+/**
+ * Sends an i2c stop condition
+ *
+ * @param baseaddr register base address
+ *
+ * @return 0 for success, -1 if error
+ */
+static int twsi_stop(void *baseaddr)
+{
+ u8 stat;
+ twsi_write_ctl(baseaddr, TWSI_CTL_STP | TWSI_CTL_ENAB);
+
+ stat = twsi_read_status(baseaddr);
+ if (stat != TWSI_STAT_IDLE) {
+ printk(BIOS_ERR, "%s: Bad status on bus@%p\n", __func__,
+ baseaddr);
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Manually clear the I2C bus and send a stop
+ */
+static void twsi_unblock(void *baseaddr)
+{
+ int i;
+ union twsx_int int_reg;
+
+ int_reg.u = 0;
+ for (i = 0; i < 9; i++) {
+ int_reg.s.scl_ovr = 0;
+ write64(baseaddr + TWSI_INT, int_reg.u);
+ udelay(5);
+ int_reg.s.scl_ovr = 1;
+ write64(baseaddr + TWSI_INT, int_reg.u);
+ udelay(5);
+ }
+ int_reg.s.sda_ovr = 1;
+ write64(baseaddr + TWSI_INT, int_reg.u);
+ udelay(5);
+ int_reg.s.scl_ovr = 0;
+ write64(baseaddr + TWSI_INT, int_reg.u);
+ udelay(5);
+ int_reg.u = 0;
+ write64(baseaddr + TWSI_INT, int_reg.u);
+ udelay(5);
+}
+
+/**
+ * Unsticks the i2c bus
+ *
+ * @param baseaddr base address of registers
+ */
+static int twsi_start_unstick(void *baseaddr)
+{
+ twsi_stop(baseaddr);
+
+ twsi_unblock(baseaddr);
+
+ return 0;
+}
+
+/**
+ * Sends an i2c start condition
+ *
+ * @param baseaddr base address of registers
+ *
+ * @return 0 for success, otherwise error
+ */
+static int twsi_start(void *baseaddr)
+{
+ int result;
+ u8 stat;
+
+ printk(BIOS_SPEW, "%s(%p)\n", __func__, baseaddr);
+ twsi_write_ctl(baseaddr, TWSI_CTL_STA | TWSI_CTL_ENAB);
+ result = twsi_wait(baseaddr);
+ if (result) {
+ stat = twsi_read_status(baseaddr);
+ printk(BIOS_SPEW, "%s: result: 0x%x, status: 0x%x\n", __func__,
+ result, stat);
+ switch (stat) {
+ case TWSI_STAT_START:
+ case TWSI_STAT_RSTART:
+ return 0;
+ case TWSI_STAT_RXADDR_ACK:
+ default:
+ return twsi_start_unstick(baseaddr);
+ }
+ }
+ printk(BIOS_SPEW, "%s: success\n", __func__);
+ return 0;
+}
+
+/**
+ * Writes data to the i2c bus
+ *
+ * @param baseraddr register base address
+ * @param slave_addr address of slave to write to
+ * @param buffer Pointer to buffer to write
+ * @param length Number of bytes in buffer to write
+ *
+ * @return 0 for success, otherwise error
+ */
+static int twsi_write_data(void *baseaddr, const u8 slave_addr,
+ const u8 *buffer, const unsigned int length)
+{
+ union twsx_sw_twsi twsi_sw;
+ unsigned int curr = 0;
+ int result;
+
+ printk(BIOS_SPEW, "%s(%p, 0x%x, %p, 0x%x)\n", __func__, baseaddr,
+ slave_addr, buffer, length);
+ result = twsi_start(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: Could not start BUS transaction\n",
+ __func__);
+ return -1;
+ }
+
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: wait failed\n", __func__);
+ return result;
+ }
+
+ twsi_sw.u = 0;
+ twsi_sw.s.op = TWSI_SW_EOP_IA;
+ twsi_sw.s.eop_ia = TWSI_DATA;
+ twsi_sw.s.data = (u32) (slave_addr << 1) | TWSI_OP_WRITE;
+
+ twsi_write_sw(baseaddr, twsi_sw);
+ twsi_write_ctl(baseaddr, TWSI_CTL_ENAB);
+
+ printk(BIOS_SPEW, "%s: Waiting\n", __func__);
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: Timed out writing slave address 0x%x\n",
+ __func__, slave_addr);
+ return result;
+ }
+ result = twsi_read_status(baseaddr);
+ if ((result = twsi_read_status(baseaddr)) != TWSI_STAT_TXADDR_ACK) {
+ twsi_stop(baseaddr);
+ return twsi_i2c_lost_arb(result, 0);
+ }
+
+ while (curr < length) {
+ twsi_sw.u = 0;
+ twsi_sw.s.op = TWSI_SW_EOP_IA;
+ twsi_sw.s.eop_ia = TWSI_DATA;
+ twsi_sw.s.data = buffer[curr++];
+
+ twsi_write_sw(baseaddr, twsi_sw);
+ twsi_write_ctl(baseaddr, TWSI_CTL_ENAB);
+
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: Timed out writing data to 0x%x\n",
+ __func__, slave_addr);
+ return result;
+ }
+ }
+
+ printk(BIOS_SPEW, "%s: Stopping\n", __func__);
+ return twsi_stop(baseaddr);
+}
+
+/**
+ * Performs a read transaction on the i2c bus
+ *
+ * @param baseaddr Base address of twsi registers
+ * @param slave_addr i2c bus address to read from
+ * @param buffer buffer to read into
+ * @param length number of bytes to read
+ *
+ * @return 0 for success, otherwise error
+ */
+static int twsi_read_data(void *baseaddr, const u8 slave_addr,
+ u8 *buffer, const unsigned int length)
+{
+ union twsx_sw_twsi twsi_sw;
+ unsigned int curr = 0;
+ int result;
+
+ printk(BIOS_SPEW, "%s(%p, 0x%x, %p, %u)\n", __func__, baseaddr,
+ slave_addr, buffer, length);
+ result = twsi_start(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: start failed\n", __func__);
+ return result;
+ }
+
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: wait failed\n", __func__);
+ return result;
+ }
+
+ twsi_sw.u = 0;
+
+ twsi_sw.s.op = TWSI_SW_EOP_IA;
+ twsi_sw.s.eop_ia = TWSI_DATA;
+
+ twsi_sw.s.data = (u32) (slave_addr << 1) | TWSI_OP_READ;
+
+ twsi_write_sw(baseaddr, twsi_sw);
+ twsi_write_ctl(baseaddr, TWSI_CTL_ENAB);
+
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: waiting for sending addr failed\n", __func__);
+ return result;
+ }
+
+ result = twsi_read_status(baseaddr);
+ if (result != TWSI_STAT_RXADDR_ACK) {
+ twsi_stop(baseaddr);
+ return twsi_i2c_lost_arb(result, 0);
+ }
+
+ while (curr < length) {
+ twsi_write_ctl(baseaddr, TWSI_CTL_ENAB |
+ ((curr < length - 1) ? TWSI_CTL_AAK : 0));
+
+ result = twsi_wait(baseaddr);
+ if (result) {
+ printk(BIOS_ERR, "%s: waiting for data failed\n",
+ __func__);
+ return result;
+ }
+
+ twsi_sw.u = twsi_read_sw(baseaddr, twsi_sw);
+ buffer[curr++] = twsi_sw.s.data;
+ }
+
+ twsi_stop(baseaddr);
+
+ return 0;
+}
+
+static int twsi_set_speed(void *baseaddr, const unsigned int speed)
+{
+ u64 io_clock_hz;
+ int n_div;
+ int m_div;
+ union twsx_sw_twsi sw_twsi;
+
+ io_clock_hz = thunderx_get_io_clock();
+
+ /* Set the TWSI clock to a conservative TWSI_BUS_FREQ. Compute the
+ * clocks M divider based on the SCLK.
+ * TWSI freq = (core freq) / (20 x (M+1) x (thp+1) x 2^N)
+ * M = ((core freq) / (20 x (TWSI freq) x (thp+1) x 2^N)) - 1
+ */
+ for (n_div = 0; n_div < 8; n_div++) {
+ m_div = io_clock_hz / (20 * speed * (TWSI_THP + 1));
+ m_div /= 1 << n_div;
+ m_div -= 1;
+ if (m_div < 16)
+ break;
+ }
+ if (m_div >= 16)
+ return -1;
+
+ sw_twsi.u = 0;
+ sw_twsi.s.v = 1;
+ sw_twsi.s.op = 0x6; /* See EOP field */
+ sw_twsi.s.r = 0; /* Select CLKCTL when R = 0 */
+ sw_twsi.s.eop_ia = 3; /* R=0 selects CLKCTL, R=1 selects STAT */
+ sw_twsi.s.data = ((m_div & 0xf) << 3) | ((n_div & 0x7) << 0);
+
+ twsi_write_sw(baseaddr, sw_twsi);
+ return 0;
+}
+
+int twsi_init(unsigned int bus, enum i2c_speed hz)
+{
+ void *baseaddr = (void *)MIO_TWSx_PF_BAR0(bus);
+ if (!baseaddr)
+ return -1;
+
+ if (twsi_set_speed(baseaddr, hz) < 0)
+ return -1;
+
+ /* Enable TWSI, HLC disable, STOP, NAK */
+ twsi_write_ctl(baseaddr, TWSI_CTL_ENAB);
+
+ return 0;
+}
+
+int platform_i2c_transfer(unsigned bus, struct i2c_msg *segments,
+ int seg_count)
+{
+ int result;
+ void *baseaddr = (void *)MIO_TWSx_PF_BAR0(bus);
+ if (!baseaddr)
+ return -1;
+
+ printk(BIOS_SPEW, "%s: %d messages\n", __func__, seg_count);
+ for (; seg_count > 0; seg_count--, segments++) {
+ if (segments->flags & I2C_M_RD) {
+ result = twsi_read_data(baseaddr, segments->slave,
+ segments->buf, segments->len);
+ } else {
+ result = twsi_write_data(baseaddr, segments->slave,
+ segments->buf, segments->len);
+ }
+ if (result) {
+ printk(BIOS_ERR, "%s: error transmitting data\n",
+ __func__);
+ return -1;
+ }
+ }
+
+ return 0;
+}
diff --git a/src/soc/cavium/cn81xx/uart.c b/src/soc/cavium/cn81xx/uart.c
new file mode 100644
index 0000000000..9fb83871ad
--- /dev/null
+++ b/src/soc/cavium/cn81xx/uart.c
@@ -0,0 +1,265 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018 Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Derived from Cavium's BSD-3 Clause OCTEONTX-SDK-6.2.0.
+ */
+
+#include <arch/io.h>
+#include <console/uart.h>
+#include <delay.h>
+#include <endian.h>
+#include <stdint.h>
+#include <soc/clock.h>
+#include <soc/uart.h>
+#include <assert.h>
+#include <soc/addressmap.h>
+#include <drivers/uart/pl011.h>
+
+union cn81xx_uart_ctl {
+ u64 u;
+ struct {
+ u64 uctl_rst : 1;
+ u64 uaa_rst : 1;
+ u64 : 2;
+ u64 csclk_en : 1;
+ u64 : 19;
+ u64 h_clkdiv_sel : 3;
+ u64 : 1;
+ u64 h_clkdiv_rst : 1;
+ u64 h_clk_byp_sel : 1;
+ u64 h_clk_en : 1;
+ u64 : 33;
+ } s;
+};
+
+struct cn81xx_uart {
+ struct pl011_uart pl011;
+ union cn81xx_uart_ctl uctl_ctl;
+ u8 rsvd4[0x8];
+ u64 uctl_spare0;
+ u8 rsvd5[0xe0];
+ u64 uctl_spare1;
+};
+
+#define UART_IBRD_BAUD_DIVINT_SHIFT 0
+#define UART_IBRD_BAUD_DIVINT_MASK 0xffff
+
+#define UART_FBRD_BAUD_DIVFRAC_SHIFT 0
+#define UART_FBRD_BAUD_DIVFRAC_MASK 0x3f
+
+
+check_member(cn81xx_uart, uctl_ctl, 0x1000);
+check_member(cn81xx_uart, uctl_spare1, 0x10f8);
+
+#define UART_SCLK_DIV 3
+
+/**
+ * Returns the current UART HCLK divider
+ *
+ * @param reg The H_CLKDIV_SEL value
+ * @return The HCLK divider
+ */
+static size_t uart_sclk_divisor(const size_t reg)
+{
+ static const u8 div[] = {1, 2, 4, 6, 8, 16, 24, 32};
+
+ assert(reg < ARRAY_SIZE(div));
+
+ return div[reg];
+}
+
+/**
+ * Returns the current UART HCLK
+ *
+ * @param uart The UART to operate on
+ * @return The HCLK in Hz
+ */
+static size_t uart_hclk(struct cn81xx_uart *uart)
+{
+ union cn81xx_uart_ctl ctl;
+ const uint64_t sclk = thunderx_get_io_clock();
+
+ ctl.u = read64(&uart->uctl_ctl);
+ return sclk / uart_sclk_divisor(ctl.s.h_clkdiv_sel);
+}
+
+unsigned int uart_platform_refclk(void)
+{
+ struct cn81xx_uart *uart =
+ (struct cn81xx_uart *)CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
+
+ if (!uart)
+ return 0;
+
+ return uart_hclk(uart);
+}
+
+uintptr_t uart_platform_base(int idx)
+{
+ return CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
+}
+
+/**
+ * Waits given count if HCLK cycles
+ *
+ * @param uart The UART to operate on
+ * @param hclks The number of HCLK cycles to wait
+ */
+static void uart_wait_hclk(struct cn81xx_uart *uart, const size_t hclks)
+{
+ const size_t hclk = uart_hclk(uart);
+ const size_t delay = (hclks * 1000000ULL) / hclk;
+ udelay(MAX(delay, 1));
+}
+
+/**
+ * Returns the UART state.
+ *
+ * @param bus The UART to operate on
+ * @return Boolean: True if UART is enabled
+ */
+int uart_is_enabled(const size_t bus)
+{
+ struct cn81xx_uart *uart = (struct cn81xx_uart *)UAAx_PF_BAR0(bus);
+ union cn81xx_uart_ctl ctl;
+
+ assert(uart);
+ if (!uart)
+ return 0;
+
+ ctl.u = read64(&uart->uctl_ctl);
+ return !!ctl.s.csclk_en;
+}
+
+/**
+ * Setup UART with desired BAUD rate in 8N1, no parity mode.
+ *
+ * @param bus The UART to operate on
+ * @param baudrate baudrate to set up
+ *
+ * @return Boolean: True on error
+ */
+int uart_setup(const size_t bus, int baudrate)
+{
+ union cn81xx_uart_ctl ctl;
+ struct cn81xx_uart *uart = (struct cn81xx_uart *)UAAx_PF_BAR0(bus);
+
+ assert(uart);
+ if (!uart)
+ return 1;
+
+ /* 1.2.1 Initialization Sequence (Power-On/Hard/Cold Reset) */
+ /* 1. Wait for IOI reset (srst_n) to deassert. */
+
+ /**
+ * 2. Assert all resets:
+ * a. UAA reset: UCTL_CTL[UAA_RST] = 1
+ * b. UCTL reset: UCTL_CTL[UCTL_RST] = 1
+ */
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.uctl_rst = 1;
+ ctl.s.uaa_rst = 1;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ /**
+ * 3. Configure the HCLK:
+ * a. Reset the clock dividers: UCTL_CTL[H_CLKDIV_RST] = 1.
+ * b. Select the HCLK frequency
+ * i. UCTL_CTL[H_CLKDIV] = desired value,
+ * ii. UCTL_CTL[H_CLKDIV_EN] = 1 to enable the HCLK.
+ * iii. Readback UCTL_CTL to ensure the values take effect.
+ * c. Deassert the HCLK clock divider reset: UCTL_CTL[H_CLKDIV_RST] = 0.
+ */
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.h_clkdiv_sel = UART_SCLK_DIV;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.h_clk_byp_sel = 0;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.h_clk_en = 1;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.h_clkdiv_rst = 0;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ /**
+ * 4. Wait 20 HCLK cycles from step 3 for HCLK to start and async fifo
+ * to properly reset.
+ */
+ uart_wait_hclk(uart, 20 + 1);
+
+ /**
+ * 5. Deassert UCTL and UAHC resets:
+ * a. UCTL_CTL[UCTL_RST] = 0
+ * b. Wait 10 HCLK cycles.
+ * c. UCTL_CTL[UAHC_RST] = 0
+ * d. You will have to wait 10 HCLK cycles before accessing any
+ * HCLK-only registers.
+ */
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.uctl_rst = 0;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ uart_wait_hclk(uart, 10 + 1);
+
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.uaa_rst = 0;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ uart_wait_hclk(uart, 10 + 1);
+
+ /**
+ * 6. Enable conditional SCLK of UCTL by writing
+ * UCTL_CTL[CSCLK_EN] = 1.
+ */
+ ctl.u = read64(&uart->uctl_ctl);
+ ctl.s.csclk_en = 1;
+ write64(&uart->uctl_ctl, ctl.u);
+
+ /**
+ * 7. Initialize the integer and fractional baud rate divider registers
+ * UARTIBRD and UARTFBRD as follows:
+ * a. Baud Rate Divisor = UARTCLK/(16xBaud Rate) = BRDI + BRDF
+ * b. The fractional register BRDF, m is calculated as
+ * integer(BRDF x 64 + 0.5)
+ * Example calculation:
+ * If the required baud rate is 230400 and hclk = 4MHz then:
+ * Baud Rate Divisor = (4x10^6)/(16x230400) = 1.085
+ * This means BRDI = 1 and BRDF = 0.085.
+ * Therefore, fractional part, BRDF = integer((0.085x64)+0.5) = 5
+ * Generated baud rate divider = 1+5/64 = 1.078
+ */
+ u64 divisor = thunderx_get_io_clock() /
+ (baudrate * 16 * uart_sclk_divisor(UART_SCLK_DIV) / 64);
+ write32(&uart->pl011.ibrd, divisor >> 6);
+ write32(&uart->pl011.fbrd, divisor & UART_FBRD_BAUD_DIVFRAC_MASK);
+
+ /**
+ * 8. Program the line control register UAA(0..1)_LCR_H and the control
+ * register UAA(0..1)_CR
+ */
+ /* 8-bits, FIFO enable */
+ write32(&uart->pl011.lcr_h, PL011_UARTLCR_H_WLEN_8 |
+ PL011_UARTLCR_H_FEN);
+ /* RX/TX enable, UART enable */
+ write32(&uart->pl011.cr, PL011_UARTCR_RXE | PL011_UARTCR_TXE |
+ PL011_UARTCR_UARTEN);
+
+ return 0;
+}
diff --git a/src/soc/cavium/common/Kconfig b/src/soc/cavium/common/Kconfig
new file mode 100644
index 0000000000..1161ac2263
--- /dev/null
+++ b/src/soc/cavium/common/Kconfig
@@ -0,0 +1,12 @@
+config SOC_CAVIUM_COMMON
+ bool
+ default n
+ select BOOTBLOCK_CUSTOM
+ select CAVIUM_BDK
+ select FLATTENED_DEVICE_TREE
+# FIXME: No Cavium support in ATF
+# select ARM64_USE_ARM_TRUSTED_FIRMWARE
+
+if SOC_CAVIUM_COMMON
+
+endif
diff --git a/src/soc/cavium/common/Makefile.inc b/src/soc/cavium/common/Makefile.inc
new file mode 100644
index 0000000000..89add5f3f1
--- /dev/null
+++ b/src/soc/cavium/common/Makefile.inc
@@ -0,0 +1,58 @@
+##
+## This file is part of the coreboot project.
+##
+## Copyright 2017-present Facebook, Inc.
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; version 2 of the License.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+
+ifeq ($(CONFIG_SOC_CAVIUM_COMMON),y)
+
+CFLAGS_arm64 += -Wstack-usage=8192
+
+bootblock-$(CONFIG_BOOTBLOCK_CUSTOM) += bootblock.c
+
+################################################################################
+# romstage
+
+romstage-y += cbmem.c
+romstage-y += bdk-coreboot.c
+
+################################################################################
+# ramstage
+
+ramstage-y += cbmem.c
+ramstage-$(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE) += bl31_plat_params.c
+
+CPPFLAGS_common += -Isrc/soc/cavium/common/include
+
+ROM_HEADER_BIN := $(objgenerated)/rom_header.bin
+ROM_HEADER_SOURCES += rom_clib_s_nbl1fw
+ROM_HEADER_SOURCES += rom_csib_s_nbl1fw
+
+ROM_HEADER_DEPS := $(foreach f, $(ROM_HEADER_SOURCES), src/soc/cavium/common/$(f).bin.hex)
+
+# Include ROM header
+$(ROM_HEADER_BIN): $(ROM_HEADER_DEPS)
+ for f in $+; \
+ do for c in $$(cat $$f | grep -v ^#); \
+ do printf $$(printf '\%o' 0x$$c); \
+ done; \
+ done > $@
+
+$(objcbfs)/bootblock.bin: $(objcbfs)/bootblock.raw.bin $(ROM_HEADER_BIN)
+ @printf " GEN $(subst $(obj)/,,$(@))\n"
+ dd if=/dev/zero ibs=1 count=$$(($(shell stat --printf="%s" $(objcbfs)/bootblock.raw.bin) + 0x10000)) of=$@ status=none
+ # Insert CLIB at 0x0 and CSIB at 0x100
+ dd if=$(ROM_HEADER_BIN) of=$@ bs=1 seek=0 conv=notrunc status=none
+ # Insert bootblock at 0x10000
+ dd if=$(objcbfs)/bootblock.raw.bin of=$@ bs=1 seek=$$((0x10000)) conv=notrunc status=none
+
+endif
diff --git a/src/soc/cavium/common/bdk-coreboot.c b/src/soc/cavium/common/bdk-coreboot.c
new file mode 100644
index 0000000000..ff30edfa79
--- /dev/null
+++ b/src/soc/cavium/common/bdk-coreboot.c
@@ -0,0 +1,130 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2017-present Facebook, Inc.
+ * Copyright 2003-2017 Cavium Inc. <support@cavium.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This file consists of data imported from bdk-config.c
+ */
+// coreboot
+#include <string.h>
+#include <assert.h>
+#include <device/i2c.h>
+#include <device/i2c_simple.h>
+#include <endian.h>
+#include <arch/io.h>
+#include <delay.h>
+#include <reset.h>
+#include <soc/timer.h>
+
+// BDK
+#include <libbdk-arch/bdk-numa.h>
+#include <libbdk-hal/bdk-config.h>
+#include <libbdk-hal/bdk-twsi.h>
+#include <libbdk-boot/bdk-watchdog.h>
+
+/**
+ * Do a twsi read from a 7 bit device address using an (optional)
+ * internal address. Up to 4 bytes can be read at a time.
+ *
+ * @param twsi_id which TWSI bus to use
+ * @param dev_addr Device address (7 bit)
+ * @param internal_addr
+ * Internal address. Can be 0, 1 or 2 bytes in width
+ * @param num_bytes Number of data bytes to read (1-4)
+ * @param ia_width_bytes
+ * Internal address size in bytes (0, 1, or 2)
+ *
+ * @return Read data, or -1 on failure
+ */
+int64_t bdk_twsix_read_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
+ uint16_t internal_addr, int num_bytes,
+ int ia_width_bytes)
+{
+ struct i2c_msg seg[2];
+ u32 buf;
+
+ assert (num_bytes < 5);
+ assert (ia_width_bytes < 3);
+
+ seg[0].flags = 0;
+ seg[0].slave = dev_addr;
+ seg[0].buf = (u8 *)&internal_addr;
+ seg[0].len = ia_width_bytes;
+ seg[1].flags = I2C_M_RD;
+ seg[1].slave = dev_addr;
+ seg[1].buf = (u8 *)&buf;
+ seg[1].len = num_bytes;
+
+ if (i2c_transfer(twsi_id, seg, ARRAY_SIZE(seg)) < 0)
+ return -1;
+
+ return cpu_to_be32(buf);
+}
+
+/**
+ * Write 1-8 bytes to a TWSI device using an internal address.
+ *
+ * @param twsi_id which TWSI interface to use
+ * @param dev_addr TWSI device address (7 bit only)
+ * @param internal_addr
+ * TWSI internal address (0, 8, or 16 bits)
+ * @param num_bytes Number of bytes to write (1-8)
+ * @param ia_width_bytes
+ * internal address width, in bytes (0, 1, 2)
+ * @param data Data to write. Data is written MSB first on the twsi bus, and
+ * only the lower num_bytes bytes of the argument are valid. (If
+ * a 2 byte write is done, only the low 2 bytes of the argument is
+ * used.
+ *
+ * @return Zero on success, -1 on error
+ */
+int bdk_twsix_write_ia(bdk_node_t node, int twsi_id, uint8_t dev_addr,
+ uint16_t internal_addr, int num_bytes,
+ int ia_width_bytes, uint64_t data)
+{
+ struct i2c_msg seg;
+ u8 buf[10];
+
+ assert (num_bytes <= 8);
+ assert (ia_width_bytes < 3);
+
+ memcpy(buf, &internal_addr, ia_width_bytes);
+ memcpy(&buf[ia_width_bytes], &data, num_bytes);
+
+ seg.flags = 0;
+ seg.slave = dev_addr;
+ seg.buf = buf;
+ seg.len = num_bytes + ia_width_bytes;
+
+ return platform_i2c_transfer(twsi_id, &seg, 1);
+}
+
+void bdk_watchdog_set(unsigned int timeout_ms)
+{
+ watchdog_set(0, timeout_ms);
+}
+
+void bdk_watchdog_poke(void)
+{
+ watchdog_poke(0);
+}
+
+void bdk_watchdog_disable(void)
+{
+ watchdog_disable(0);
+}
+
+int bdk_watchdog_is_running(void)
+{
+ return watchdog_is_running(0);
+}
diff --git a/src/soc/cavium/common/bl31_plat_params.c b/src/soc/cavium/common/bl31_plat_params.c
new file mode 100644
index 0000000000..583eac8059
--- /dev/null
+++ b/src/soc/cavium/common/bl31_plat_params.c
@@ -0,0 +1,32 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <arm_tf.h>
+#include <assert.h>
+#include <soc/bl31_plat_params.h>
+
+static struct bl31_plat_param *plat_params;
+
+void register_bl31_param(struct bl31_plat_param *param)
+{
+ param->next = plat_params;
+ plat_params = param;
+}
+
+void *soc_get_bl31_plat_params(bl31_params_t *bl31_params)
+{
+ return plat_params;
+}
diff --git a/src/soc/cavium/common/bootblock.c b/src/soc/cavium/common/bootblock.c
new file mode 100644
index 0000000000..c61a8d7dc1
--- /dev/null
+++ b/src/soc/cavium/common/bootblock.c
@@ -0,0 +1,68 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/exception.h>
+#include <console/console.h>
+#include <delay.h>
+#include <program_loading.h>
+#include <symbols.h>
+#include <timestamp.h>
+#include <soc/bootblock.h>
+
+DECLARE_OPTIONAL_REGION(timestamp);
+
+__attribute__((weak)) void bootblock_mainboard_early_init(void) { /* no-op */ }
+__attribute__((weak)) void bootblock_soc_early_init(void) { /* do nothing */ }
+__attribute__((weak)) void bootblock_soc_init(void) { /* do nothing */ }
+__attribute__((weak)) void bootblock_mainboard_init(void) { /* do nothing */ }
+
+
+/* C code entry point for the boot block */
+void bootblock_main(const uint64_t reg_x0,
+ const uint64_t reg_x1,
+ const uint64_t reg_pc)
+{
+ uint64_t base_timestamp = 0;
+
+ init_timer();
+
+ if (IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS))
+ base_timestamp = timestamp_get();
+
+ /* Initialize timestamps if we have TIMESTAMP region in memlayout.ld. */
+ if (IS_ENABLED(CONFIG_COLLECT_TIMESTAMPS) && _timestamp_size > 0)
+ timestamp_init(base_timestamp);
+
+ bootblock_soc_early_init();
+ bootblock_mainboard_early_init();
+
+ if (IS_ENABLED(CONFIG_BOOTBLOCK_CONSOLE)) {
+ console_init();
+ exception_init();
+
+ if (reg_x0)
+ printk(BIOS_ERR,
+ "BOOTBLOCK: RST Boot Failure Code %lld\n",
+ reg_x0);
+
+ printk(BIOS_DEBUG, "BOOTBLOCK: FDT 0x%llX\n", reg_x1);
+ }
+
+ bootblock_soc_init();
+ bootblock_mainboard_init();
+
+ run_romstage();
+}
diff --git a/src/soc/cavium/common/cbmem.c b/src/soc/cavium/common/cbmem.c
new file mode 100644
index 0000000000..401f8b2a65
--- /dev/null
+++ b/src/soc/cavium/common/cbmem.c
@@ -0,0 +1,26 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2014 Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <cbmem.h>
+#include <soc/addressmap.h>
+#include <soc/sdram.h>
+#include <stdlib.h>
+#include <symbols.h>
+
+void *cbmem_top(void)
+{
+ return (void *)min((uintptr_t)_dram + sdram_size_mb() * MiB,
+ MAX_DRAM_ADDRESS);
+}
diff --git a/src/soc/cavium/common/include/soc/bl31_plat_params.h b/src/soc/cavium/common/include/soc/bl31_plat_params.h
new file mode 100644
index 0000000000..3407e90c07
--- /dev/null
+++ b/src/soc/cavium/common/include/soc/bl31_plat_params.h
@@ -0,0 +1,25 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2016 Rockchip Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __BL31_PLAT_PARAMS_H__
+#define __BL31_PLAT_PARAMS_H__
+
+// FIXME: use correct path one ATF is upstream
+#include <arm-trusted-firmware/plat/rockchip/common/include/plat_params.h>
+
+void register_bl31_param(struct bl31_plat_param *param);
+
+#endif/* __BL31_PLAT_PARAMS_H__ */
diff --git a/src/soc/cavium/common/include/soc/bootblock.h b/src/soc/cavium/common/include/soc/bootblock.h
new file mode 100644
index 0000000000..040c5a3a67
--- /dev/null
+++ b/src/soc/cavium/common/include/soc/bootblock.h
@@ -0,0 +1,29 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef SRC_SOC_CAVIUM_COMMON_INCLUDE_SOC_BOOTBLOCK_H_
+#define SRC_SOC_CAVIUM_COMMON_INCLUDE_SOC_BOOTBLOCK_H_
+
+void bootblock_mainboard_early_init(void);
+void bootblock_soc_early_init(void);
+void bootblock_soc_init(void);
+void bootblock_mainboard_init(void);
+
+void bootblock_main(const uint64_t reg_x0,
+ const uint64_t reg_x1,
+ const uint64_t reg_pc);
+
+
+#endif /* SRC_SOC_CAVIUM_COMMON_INCLUDE_SOC_BOOTBLOCK_H_ */
diff --git a/src/soc/cavium/common/include/soc/sysreg.h b/src/soc/cavium/common/include/soc/sysreg.h
new file mode 100644
index 0000000000..655fe09cb6
--- /dev/null
+++ b/src/soc/cavium/common/include/soc/sysreg.h
@@ -0,0 +1,65 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright 2018-present Facebook, Inc.
+ * Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __SOC_CAVIUM_COMMON_INCLUDE_SOC_SYSREG_H
+#define __SOC_CAVIUM_COMMON_INCLUDE_SOC_SYSREG_H
+
+/* TODO: add CVMCTL_EL1 */
+
+#define AP_CVMMEMCTL0_EL1_NODE_SHIFT 61
+#define AP_CVMMEMCTL0_EL1_NODE_MASK 0x3
+#define AP_CVMMEMCTL0_EL1_STEXFAILCNT_SHIFT 58
+#define AP_CVMMEMCTL0_EL1_STEXFAILCNT_MASK 0x7
+#define AP_CVMMEMCTL0_EL1_WFELDEX1DIS (1 << 57)
+#define AP_CVMMEMCTL0_EL1_STLSTALLFORCE (1 << 56)
+#define AP_CVMMEMCTL0_EL1_DMBSTALLFORCE (1 << 55)
+#define AP_CVMMEMCTL0_EL1_TLBINOPDIS (1 << 54)
+#define AP_CVMMEMCTL0_EL1_TLBIICFLUSH (1 << 53)
+#define AP_CVMMEMCTL0_EL1_GSYNCTO_SHIFT 48
+#define AP_CVMMEMCTL0_EL1_GSYNCTO_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_UTLBFILLBYPDIS (1 << 47)
+#define AP_CVMMEMCTL0_EL1_TLBIALL (1 << 46)
+#define AP_CVMMEMCTL0_EL1_WBFDSBFLUSHALL (1 << 45)
+#define AP_CVMMEMCTL0_EL1_WBFDMBFLUSHNEXT (1 << 44)
+#define AP_CVMMEMCTL0_EL1_STEXL2CFORCE (1 << 43)
+#define AP_CVMMEMCTL0_EL1_WCUMISSFORCE (1 << 41)
+#define AP_CVMMEMCTL0_EL1_REPLAYPREFDIS (1 << 40)
+#define AP_CVMMEMCTL0_EL1_ZVAL2CDIS (1 << 39)
+#define AP_CVMMEMCTL0_EL1_LDIL2CDIS (1 << 38)
+#define AP_CVMMEMCTL0_EL1_DVCA47 (1 << 37)
+#define AP_CVMMEMCTL0_EL1_STPREFDIS (1 << 36)
+#define AP_CVMMEMCTL0_EL1_LDPREFDIS (1 << 35)
+#define AP_CVMMEMCTL0_EL1_WFILDEXDIS (1 << 34)
+#define AP_CVMMEMCTL0_EL1_WFITO_SHIFT 31
+#define AP_CVMMEMCTL0_EL1_WFITO_MASK 0x7
+#define AP_CVMMEMCTL0_EL1_RBFSHORTTO_SHIFT 26
+#define AP_CVMMEMCTL0_EL1_RBFSHORTTO_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_RBFTO_SHIFT 21
+#define AP_CVMMEMCTL0_EL1_RBFTO_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_WBFALLBARRIER (1 << 20)
+#define AP_CVMMEMCTL0_EL1_WBFNOMERGE (1 << 19)
+#define AP_CVMMEMCTL0_EL1_WBFTONSHENA (1 << 18)
+#define AP_CVMMEMCTL0_EL1_WBFTOMRGCLRENA (1 << 17)
+#define AP_CVMMEMCTL0_EL1_WBFTO_SHIFT 12
+#define AP_CVMMEMCTL0_EL1_WBFTO_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_WBFTHRESH_SHIFT 7
+#define AP_CVMMEMCTL0_EL1_WBFTHRESH_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_UTLBENTRIESM1_SHIFT 2
+#define AP_CVMMEMCTL0_EL1_UTLBENTRIESM1_MASK 0x1f
+#define AP_CVMMEMCTL0_EL1_CCLKFORCE (1 << 1)
+#define AP_CVMMEMCTL0_EL1_MCLKFORCE (1 << 0)
+
+#endif /* __SOC_CAVIUM_COMMON_INCLUDE_SOC_SYSREG_H */
diff --git a/src/soc/cavium/common/rom_clib_s_nbl1fw.bin.hex b/src/soc/cavium/common/rom_clib_s_nbl1fw.bin.hex
new file mode 100644
index 0000000000..231c6a60b1
--- /dev/null
+++ b/src/soc/cavium/common/rom_clib_s_nbl1fw.bin.hex
@@ -0,0 +1,16 @@
+43 56 4d 5f 43 4c 49 42 00 00 00 00 00 00 00 00
+00 00 02 00 00 00 00 00 00 00 03 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
diff --git a/src/soc/cavium/common/rom_csib_s_nbl1fw.bin.hex b/src/soc/cavium/common/rom_csib_s_nbl1fw.bin.hex
new file mode 100644
index 0000000000..f7a2021aaf
--- /dev/null
+++ b/src/soc/cavium/common/rom_csib_s_nbl1fw.bin.hex
@@ -0,0 +1,16 @@
+43 56 4d 5f 43 53 49 42 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
diff --git a/src/vendorcode/cavium/include/bdk/bdk-coreboot.h b/src/vendorcode/cavium/include/bdk/bdk-coreboot.h
new file mode 100644
index 0000000000..7b417b6c02
--- /dev/null
+++ b/src/vendorcode/cavium/include/bdk/bdk-coreboot.h
@@ -0,0 +1,173 @@
+/*
+ * This file is part of the coreboot project.
+ * Copyright (c) 2003-2017 Cavium Inc. (support@cavium.com). All rights
+ * reserved.
+ * Copyright 2018-present Facebook, Inc.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * access.h: Wrappers for memory access
+ */
+
+#ifndef __BDK_BDK_COREBOOT_H
+#define __BDK_BDK_COREBOOT_H
+
+#include <arch/io.h>
+#include <delay.h>
+
+/**
+ * Convert a memory pointer (void*) into a hardware compatible
+ * memory address (uint64_t). Cavium hardware widgets don't
+ * understand logical addresses.
+ *
+ * @param ptr C style memory pointer
+ * @return Hardware physical address
+ */
+static inline uint64_t bdk_ptr_to_phys(void *ptr)
+{
+ /* PA = VA for coreboot's purposes */
+ return (uint64_t)ptr;
+}
+
+/**
+ * Convert a hardware physical address (uint64_t) into a
+ * memory pointer (void *).
+ *
+ * @param physical_address
+ * Hardware physical address to memory
+ * @return Pointer to memory
+ */
+static inline void *bdk_phys_to_ptr(uint64_t physical_address)
+{
+ /* PA = VA for coreboot's purposes */
+ return (void *)physical_address;
+}
+
+static inline void bdk_write64_int64(uint64_t address, int64_t value)
+{
+ dmb();
+ *(volatile int64_t *)address = value;
+ dmb();
+}
+
+static inline void bdk_write64_uint64(uint64_t address, uint64_t value)
+{
+ write64(bdk_phys_to_ptr(address), value);
+}
+
+static inline void bdk_write64_int32(uint64_t address, int32_t value)
+{
+ dmb();
+ *(volatile int32_t *)address = value;
+ dmb();
+}
+
+static inline void bdk_write64_uint32(uint64_t address, uint32_t value)
+{
+ write32(bdk_phys_to_ptr(address), value);
+}
+
+static inline void bdk_write64_int16(uint64_t address, int16_t value)
+{
+ dmb();
+ *(volatile int16_t *)address = value;
+ dmb();
+}
+
+static inline void bdk_write64_uint16(uint64_t address, uint16_t value)
+{
+ write16(bdk_phys_to_ptr(address), value);
+}
+
+static inline void bdk_write64_int8(uint64_t address, int8_t value)
+{
+ dmb();
+ *(volatile int8_t *)address = value;
+ dmb();
+}
+
+static inline void bdk_write64_uint8(uint64_t address, uint8_t value)
+{
+ write8(bdk_phys_to_ptr(address), value);
+}
+
+static inline int64_t bdk_read64_int64(uint64_t address)
+{
+ return *(volatile int64_t *)bdk_phys_to_ptr(address);
+}
+
+static inline uint64_t bdk_read64_uint64(uint64_t address)
+{
+ return read64(bdk_phys_to_ptr(address));
+}
+
+static inline int32_t bdk_read64_int32(uint64_t address)
+{
+ return *(volatile int32_t *)bdk_phys_to_ptr(address);
+}
+
+static inline uint32_t bdk_read64_uint32(uint64_t address)
+{
+ return read32(bdk_phys_to_ptr(address));
+}
+
+static inline int16_t bdk_read64_int16(uint64_t address)
+{
+ return *(volatile int16_t *)bdk_phys_to_ptr(address);
+}
+
+static inline uint16_t bdk_read64_uint16(uint64_t address)
+{
+ return read16(bdk_phys_to_ptr(address));
+}
+
+static inline int8_t bdk_read64_int8(uint64_t address)
+{
+ return *(volatile int8_t *)bdk_phys_to_ptr(address);
+}
+
+static inline uint8_t bdk_read64_uint8(uint64_t address)
+{
+ return read8(bdk_phys_to_ptr(address));
+}
+
+/**
+ * Returns the number of bits set in the provided value.
+ * Simple wrapper for POP instruction.
+ *
+ * @param val 32 bit value to count set bits in
+ *
+ * @return Number of bits set
+ */
+inline uint32_t bdk_pop(uint32_t v)
+{
+ /* Use parallel SWAR algorithm */
+ v = v - ((v >> 1) & 0x55555555);
+ v = (v & 0x33333333) + ((v >> 2) & 0x33333333);
+ return (((v + (v >> 4)) & 0xF0F0F0F) * 0x1010101) >> 24;
+}
+
+/**
+ * Returns the number of bits set in the provided value.
+ * Simple wrapper for DPOP instruction.
+ *
+ * @param val 64 bit value to count set bits in
+ *
+ * @return Number of bits set
+ */
+inline int bdk_dpop(uint64_t val)
+{
+ return bdk_pop(val & 0xffffffff) + bdk_pop(val >> 32);
+}
+
+/**
+ * Wait for the specified number of micro seconds
+ *
+ * @param usec micro seconds to wait
+ */
+static inline void bdk_wait_usec(uint64_t usec)
+{
+ udelay((unsigned int)usec);
+}
+
+#endif /* !__BDK_BDK_COREBOOT_H */
diff --git a/src/vendorcode/cavium/include/bdk/bdk-minimal.h b/src/vendorcode/cavium/include/bdk/bdk-minimal.h
index 3ecf5a700a..e22e8a1524 100644
--- a/src/vendorcode/cavium/include/bdk/bdk-minimal.h
+++ b/src/vendorcode/cavium/include/bdk/bdk-minimal.h
@@ -10,13 +10,12 @@
* bdk-minimal.h: Subset of bdk.h used by coreboot
*/
-#ifndef __SOC_CAVIUM_COMMON_BDK_MINIMAL_H__
-#define __SOC_CAVIUM_COMMON_BDK_MINIMAL_H__
+#ifndef BDK_MINIMAL_H__
+#define BDK_MINIMAL_H__
#include <console/console.h> /* for printk */
#include <endian.h>
#include <stddef.h> /* for NULL */
-#include <libbdk-hal/bdk-access.h>
#define bdk_le16_to_cpu(x) le16_to_cpu(x)
#define bdk_le32_to_cpu(x) le32_to_cpu(x)
@@ -28,11 +27,6 @@
#define bdk_cpu_to_le32(x) cpu_to_le32(x)
#define bdk_cpu_to_le64(x) cpu_to_le64(x)
-#define __BYTE_ORDER __BYTE_ORDER__
-/* Watch out for __BIG_ENDIAN. coreboot usually checks if it's defined at all
- * but the Cavium BDK checks its value. */
-#define __BIG_ENDIAN 4321
-
#define printf(format, ...) printk(BIOS_DEBUG, format, ##__VA_ARGS__)
#define puts(str) printk(BIOS_INFO, str)
#define fflush(x) /* output gets flushed automatically */
@@ -42,8 +36,10 @@
#include <libbdk-arch/bdk-asm.h>
#include <libbdk-arch/bdk-model.h>
#include <libbdk-arch/bdk-numa.h>
+#include <libbdk-hal/bdk-access.h>
#include <libbdk-arch/bdk-require.h>
+
#include <libbdk-arch/bdk-csr.h>
#include <libbdk-os/bdk-thread.h>
@@ -57,4 +53,4 @@
static inline char *getenv(const char *name) { return NULL; }
-#endif /* !__SOC_CAVIUM_COMMON_BDK_MINIMAL_H__ */
+#endif /* BDK_MINIMAL_H__ */