summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJon Harrison <bothlyn@blueyonder.co.uk>2009-07-01 13:19:25 +0000
committerRonald G. Minnich <rminnich@gmail.com>2009-07-01 13:19:25 +0000
commit9a7368d4b73b4803f2b152efa08ce97234e72371 (patch)
treeddbf215831c3ec93eb518c85d20f43952e909121
parent0d4a08e7da73c1a24a7bb092ba6ef2c09af37239 (diff)
downloadcoreboot-9a7368d4b73b4803f2b152efa08ce97234e72371.tar.xz
I missed three files.
Signed-off-by: Jon Harrison <bothlyn@blueyonder.co.uk> Acked-by: Ronald G. Minnich <rminnich@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4389 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/include/device/pci_ids.h8
-rw-r--r--src/mainboard/via/epia-n/Options.lb4
-rw-r--r--src/southbridge/via/vt8237r/vt8237r_lpc.c36
3 files changed, 44 insertions, 4 deletions
diff --git a/src/include/device/pci_ids.h b/src/include/device/pci_ids.h
index 98667854d3..8e65d7b0fb 100644
--- a/src/include/device/pci_ids.h
+++ b/src/include/device/pci_ids.h
@@ -1198,6 +1198,14 @@
#define PCI_DEVICE_ID_VIA_CN700_VLINK 0x7314
#define PCI_DEVICE_ID_VIA_CN700_BRIDGE 0xB198
#define PCI_DEVICE_ID_VIA_CN700_VGA 0x3344
+#define PCI_DEVICE_ID_VIA_CN400_AGP 0x0259
+#define PCI_DEVICE_ID_VIA_CN400_ERR 0x1259
+#define PCI_DEVICE_ID_VIA_CN400_HOST 0x2259
+#define PCI_DEVICE_ID_VIA_CN400_MEMCTRL 0x3259
+#define PCI_DEVICE_ID_VIA_CN400_PM 0x4259
+#define PCI_DEVICE_ID_VIA_CN400_VLINK 0x7259
+#define PCI_DEVICE_ID_VIA_CN400_BRIDGE 0xB198
+#define PCI_DEVICE_ID_VIA_CN400_VGA 0x3118
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
diff --git a/src/mainboard/via/epia-n/Options.lb b/src/mainboard/via/epia-n/Options.lb
index def6956bec..3eca70e4b1 100644
--- a/src/mainboard/via/epia-n/Options.lb
+++ b/src/mainboard/via/epia-n/Options.lb
@@ -58,7 +58,7 @@ uses CONFIG_HAVE_ACPI_TABLES
uses CONFIG_HAVE_ACPI_RESUME
uses CONFIG_CROSS_COMPILE
uses CC
-uses CONFIG_HOSTCC
+uses HOSTCC
uses CONFIG_OBJCOPY
uses CONFIG_DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_MAXIMUM_CONSOLE_LOGLEVEL
@@ -108,7 +108,7 @@ default CONFIG_RAMBASE = 0x00004000
default CONFIG_ROM_PAYLOAD = 1
default CONFIG_CROSS_COMPILE = ""
default CC = "$(CROSS_COMPILE)gcc -m32 -fno-stack-protector"
-default CONFIG_HOSTCC = "gcc"
+default HOSTCC = "gcc"
#default CONFIG_MAINBOARD = "EPIA-N"
##
diff --git a/src/southbridge/via/vt8237r/vt8237r_lpc.c b/src/southbridge/via/vt8237r/vt8237r_lpc.c
index 0711da8eb2..2481da4e2f 100644
--- a/src/southbridge/via/vt8237r/vt8237r_lpc.c
+++ b/src/southbridge/via/vt8237r/vt8237r_lpc.c
@@ -91,7 +91,7 @@ static void setup_ioapic(u32 ioapic_base)
/* All delivered to CPU0. */
ioapic_table[0].value_high = (lapicid()) << (56 - 32);
- l = (unsigned long *)ioapic_base;
+ l = (u32 *)ioapic_base;
/* Set APIC to FSB message bus. */
l[0] = 0x3;
@@ -243,26 +243,56 @@ static void vt8237r_init(struct device *dev)
{
u8 enables;
+ printk_spew("Entering vt8237r_init.\n");
+
+#ifdef CONFIG_EPIA_VT8237R_INIT
+ printk_spew("vt8237r_init SATA LED.\n");
/*
+ * TODO: Looks like stock BIOS can do this but causes a hang
* Enable SATA LED, disable special CPU Frequency Change -
* GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
+ * Setup to match EPIA default
+ * PCS0# on Pin U1
*/
- pci_write_config8(dev, 0xe5, 0x9);
+ enables = pci_read_config8(dev, 0xe5);
+ enables |= 0x02;
+ pci_write_config8(dev, 0xe5, enables);
+
+ printk_spew("vt8237r_init PCI Req.\n");
+ /*
+ * Enable Flash Write Access.
+ * Note EPIA-N Does not use REQ5 or PCISTP#(Hang)
+ */
+ enables = pci_read_config8(dev, 0xe4);
+ enables |= 0x2B;
+ pci_write_config8(dev, 0xe4, enables);
+#else
+ /*
+ * Enable SATA LED, disable special CPU Frequency Change -
+ * GPIO28 GPIO22 GPIO29 GPIO23 are GPIOs.
+ */
+ pci_write_config8(dev, 0xe5, 0x09);
+
/* REQ5 as PCI request input - should be together with INTE-INTH. */
pci_write_config8(dev, 0xe4, 0x4);
+#endif
+
+ printk_spew("vt8237r_init CPU Rst.\n");
/* Set bit 3 of 0x4f (use INIT# as CPU reset). */
enables = pci_read_config8(dev, 0x4f);
enables |= 0x08;
pci_write_config8(dev, 0x4f, enables);
+ printk_spew("vt8237r_init Read Pass Write Ctrl.\n");
/*
* Set Read Pass Write Control Enable
* (force A2 from APIC FSB to low).
*/
pci_write_config8(dev, 0x48, 0x8c);
+ printk_spew("vt8237r_init calling southbridge_init_common.\n");
southbridge_init_common(dev);
/* FIXME: Intel needs more bit set for C2/C3. */
@@ -272,6 +302,8 @@ static void vt8237r_init(struct device *dev)
* Will work for C3 and for FID/VID change.
*/
outb(0x1, VT8237R_ACPI_IO_BASE + 0x11);
+
+ printk_spew("Leaving vt8237r_init.\n");
}
static void vt8237s_init(struct device *dev)