summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2010-04-25 15:21:18 +0000
committerRudolf Marek <r.marek@assembler.cz>2010-04-25 15:21:18 +0000
commita3c10acaacb6baeac377338dae3bc0d5b0fb104a (patch)
tree70da31dc3b0652d9c4bc8e70900a3967042d82dd
parent467a065384f0d50cbf2d100b55b58168ec98f0d3 (diff)
downloadcoreboot-a3c10acaacb6baeac377338dae3bc0d5b0fb104a.tar.xz
Following patch changes the K8M890 VGA handling. It reverts the framebuffer size
to option based (similar what Uwe did) and also it uses GFXUMA to handle the high_tables_start offset from memory top. To satisfy the CMOS option users (Hi, libv! ;) I added also a possibility to do that through CMOS. Fixed printks to match the new style. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5494 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/asus/m2v-mx_se/mainboard.c9
-rw-r--r--src/southbridge/via/k8t890/Kconfig33
-rw-r--r--src/southbridge/via/k8t890/k8t890_dram.c103
3 files changed, 78 insertions, 67 deletions
diff --git a/src/mainboard/asus/m2v-mx_se/mainboard.c b/src/mainboard/asus/m2v-mx_se/mainboard.c
index 4b6f322498..d6190b995a 100644
--- a/src/mainboard/asus/m2v-mx_se/mainboard.c
+++ b/src/mainboard/asus/m2v-mx_se/mainboard.c
@@ -24,6 +24,10 @@
#include <southbridge/via/k8t890/k8t890.h>
#include "chip.h"
+#if CONFIG_GFXUMA
+uint64_t uma_memory_base, uma_memory_size;
+#endif
+
int add_mainboard_resources(struct lb_memory *mem)
{
device_t dev;
@@ -38,6 +42,11 @@ int add_mainboard_resources(struct lb_memory *mem)
res->size);
}
+#if (CONFIG_GFXUMA == 1)
+ lb_add_memory_range(mem, LB_MEM_RESERVED,
+ uma_memory_base, uma_memory_size);
+#endif
+
#if CONFIG_HAVE_ACPI_RESUME == 1
lb_add_memory_range(mem, LB_MEM_RESERVED,
CONFIG_RAMBASE, ((CONFIG_RAMTOP) - CONFIG_RAMBASE));
diff --git a/src/southbridge/via/k8t890/Kconfig b/src/southbridge/via/k8t890/Kconfig
index 34678ef4a5..c921e67e8e 100644
--- a/src/southbridge/via/k8t890/Kconfig
+++ b/src/southbridge/via/k8t890/Kconfig
@@ -1,3 +1,36 @@
config SOUTHBRIDGE_VIA_K8T890
bool
+config SOUTHBRIDGE_VIA_K8T890_VGA_EN
+ bool "Enable onboard K8M890 graphics"
+ default y
+ depends on SOUTHBRIDGE_VIA_K8T890
+ select VGA
+ select GFXUMA
+
+choice
+ prompt "Framebuffer size"
+ default K8M890_VIDEO_MB_32MB
+ depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN
+
+config K8M890_VIDEO_MB_32MB
+ bool "32MB"
+config K8M890_VIDEO_MB_64MB
+ bool "64MB"
+config K8M890_VIDEO_MB_128MB
+ bool "128MB"
+config K8M890_VIDEO_MB_256MB
+ bool "256MB"
+config K8M890_VIDEO_MB_CMOS
+ bool "Use CMOS option"
+
+endchoice
+
+config VIDEO_MB
+ int
+ default 32 if K8M890_VIDEO_MB_32MB
+ default 64 if K8M890_VIDEO_MB_64MB
+ default 128 if K8M890_VIDEO_MB_128MB
+ default 256 if K8M890_VIDEO_MB_256MB
+ default -1 if K8M890_VIDEO_MB_CMOS
+ depends on SOUTHBRIDGE_VIA_K8T890_VGA_EN
diff --git a/src/southbridge/via/k8t890/k8t890_dram.c b/src/southbridge/via/k8t890/k8t890_dram.c
index ac67d4a5b6..4f99fec155 100644
--- a/src/southbridge/via/k8t890/k8t890_dram.c
+++ b/src/southbridge/via/k8t890/k8t890_dram.c
@@ -67,47 +67,44 @@ static void dram_enable(struct device *dev)
}
+#if CONFIG_GFXUMA
+extern uint64_t uma_memory_base, uma_memory_size;
+#endif
+
static void dram_enable_k8m890(struct device *dev)
{
- dram_enable(dev);
+#if CONFIG_GFXUMA
+ msr_t msr;
+ int ret;
+ unsigned int fbbits;
+
+ /* use CMOS */
+ if (CONFIG_VIDEO_MB == -1) {
+ ret = get_option(&fbbits, "videoram_size");
+ if (ret) {
+ printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret);
+ fbbits = 5;
+ }
+
+ if ((fbbits < 1) || (fbbits > 7)) {
+ printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n",
+ 4 << fbbits);
+ fbbits = 5;
+ }
+ uma_memory_size = 4 << (fbbits + 20);
+ } else {
+ uma_memory_size = (CONFIG_VIDEO_MB << 20);
+ }
+ msr = rdmsr(TOP_MEM);
+ uma_memory_base = msr.lo - uma_memory_size;
+ printk(BIOS_INFO, "K8M890: UMA base is %llx size is %d (MB)\n", uma_memory_base, uma_memory_size / 1024 / 1024);
/* enable VGA, so the bridges gets VGA_EN and resources are set */
pci_write_config8(dev, 0xa1, 0x80);
-}
-
-static struct resource *resmax;
-
-static void get_memres(void *gp, struct device *dev, struct resource *res)
-{
- unsigned int *fbsize = (unsigned int *) gp;
- uint64_t proposed_base = res->base + res->size - *fbsize;
-
- printk(BIOS_DEBUG, "get_memres: res->base=%llx res->size=%llx %d %d %d\n",
- res->base, res->size, (res->size > *fbsize),
- (!(proposed_base & (*fbsize - 1))),
- (proposed_base < ((uint64_t) 0xffffffff)));
-
- /* if we fit and also align OK, and must be below 4GB */
- if ((res->size > *fbsize) && (!(proposed_base & (*fbsize - 1))) &&
- (proposed_base < ((uint64_t) 0xffffffff) )) {
- resmax = res;
- }
-#if CONFIG_WRITE_HIGH_TABLES==1
-/* in arch/i386/boot/tables.c */
-extern uint64_t high_tables_base, high_tables_size;
-
- if ((high_tables_base) && ((high_tables_base > proposed_base) &&
- (high_tables_base < (res->base + res->size)))) {
- high_tables_base = proposed_base - high_tables_size;
- printk(BIOS_DEBUG, "Moving the high_tables_base pointer to "
- "new base %llx\n", high_tables_base);
- }
#endif
+ dram_enable(dev);
}
-/*
- *
- */
int
k8m890_host_fb_size_get(void)
{
@@ -125,57 +122,29 @@ k8m890_host_fb_size_get(void)
static void dram_init_fb(struct device *dev)
{
+#if CONFIG_GFXUMA
/* Important bits:
* Enable the internal GFX bit 7 of reg 0xa1 plus in same reg:
* bits 6:4 X fbuffer size will be 2^(X+2) or 100 = 64MB, 101 = 128MB
* bits 3:0 BASE [31:28]
* reg 0xa0 bits 7:1 BASE [27:21] bit0 enable CPU access
*/
- u8 tmp;
- uint64_t proposed_base;
unsigned int fbbits = 0;
- unsigned int fbsize;
+ u8 tmp;
int ret;
-
- ret = get_option(&fbbits, "videoram_size");
- if (ret) {
- printk(BIOS_WARNING, "Failed to get videoram size (error %d), using default.\n", ret);
- fbbits = 5;
- }
-
- if ((fbbits < 1) || (fbbits > 7)) {
- printk(BIOS_WARNING, "Invalid videoram size (%d), using default.\n",
- 4 << fbbits);
- fbbits = 5;
- }
-
- fbsize = 4 << (fbbits + 20);
-
- resmax = NULL;
- search_global_resources(
- IORESOURCE_MEM | IORESOURCE_CACHEABLE, IORESOURCE_MEM | IORESOURCE_CACHEABLE,
- get_memres, (void *) &fbsize);
-
- /* no space for FB */
- if (!resmax) {
- printk(BIOS_ERR, "VIA FB: no space for framebuffer in RAM\n");
- return;
- }
-
- proposed_base = resmax->base + resmax->size - fbsize;
- resmax->size -= fbsize;
-
- printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", 4 << fbbits);
+ fbbits = ((log2(uma_memory_size >> 20) - 2) << 4);
+ printk(BIOS_INFO, "K8M890: Using a %dMB framebuffer.\n", (unsigned int) (uma_memory_size >> 20));
/* Step 1: enable UMA but no FB */
pci_write_config8(dev, 0xa1, 0x80);
/* Step 2: enough is just the FB size, the CPU accessible address is not needed */
- tmp = (fbbits << 4) | 0x80;
+ tmp = fbbits | 0x80;
pci_write_config8(dev, 0xa1, tmp);
/* TODO K8 needs some UMA fine tuning too maybe call some generic routine here? */
+#endif
}
static const struct device_operations dram_ops_t = {