diff options
| author | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 23:57:49 +0000 |
|---|---|---|
| committer | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 23:57:49 +0000 |
| commit | 6d74d76de46e733fa4866f47b58be60feb472f1f (patch) | |
| tree | 16f31f8d51e6eaa021bc26a47d6c8d92568c5fb3 | |
| parent | d95465d08f5be0ec46fe3b1f801b98f7c5a43f81 (diff) | |
| download | coreboot-6d74d76de46e733fa4866f47b58be60feb472f1f.tar.xz | |
get_bus_cong using sysconf instead
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2442 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
47 files changed, 658 insertions, 347 deletions
diff --git a/src/mainboard/broadcom/blast/cache_as_ram_auto.c b/src/mainboard/broadcom/blast/cache_as_ram_auto.c index 3ed4001a9f..e7266903eb 100644 --- a/src/mainboard/broadcom/blast/cache_as_ram_auto.c +++ b/src/mainboard/broadcom/blast/cache_as_ram_auto.c @@ -4,7 +4,7 @@ //#define K8_SCAN_PCI_BUS 1 -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 diff --git a/src/mainboard/broadcom/blast/cmos.layout b/src/mainboard/broadcom/blast/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/broadcom/blast/cmos.layout +++ b/src/mainboard/broadcom/blast/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c index 44a9fc018e..95f9d12175 100644 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ b/src/mainboard/broadcom/blast/get_bus_conf.c @@ -7,10 +7,22 @@ #include <cpu/amd/dualcore.h> #endif -unsigned sblk; -unsigned pci1234[] = +#include <cpu/amd/amdk8_sysconf.h> + + +// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables +//busnum is default +unsigned char bus_isa = 10; +unsigned char bus_bcm5780[7]; +unsigned char bus_bcm5785_0 = 1; +unsigned char bus_bcm5785_1 = 8; +unsigned char bus_bcm5785_1_1 = 9; +unsigned apicid_bcm5785[3]; + + +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -20,9 +32,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, // 0x20202020, @@ -33,16 +43,6 @@ unsigned hcdn[] = // 0x20202020, // 0x20202020, }; - -// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables -//busnum is default -unsigned char bus_isa = 10; -unsigned char bus_bcm5780[7]; -unsigned char bus_bcm5785_0 = 1; -unsigned char bus_bcm5785_1 = 8; -unsigned char bus_bcm5785_1_1 = 9; -unsigned apicid_bcm5785[3]; - unsigned sbdn2; extern void get_sblk_pci1234(void); @@ -61,18 +61,22 @@ void get_bus_conf(void) get_bus_conf_done = 1; - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } get_sblk_pci1234(); - sbdn = (hcdn[0] >> 8) & 0xff; - sbdn2 = hcdn[0] & 0xff; // bcm5780 + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - bus_bcm5785_0 = (pci1234[0] >> 16) & 0xff; + bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_bcm5780[0] = bus_bcm5785_0; /* bcm5785 */ - dev = dev_find_slot(bus_bcm5785_0, PCI_DEVFN(sbdn,0)); + dev = dev_find_slot(bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); dev = dev_find_slot(bus_bcm5785_1, PCI_DEVFN(0x0d,0)); diff --git a/src/mainboard/broadcom/blast/irq_tables.c b/src/mainboard/broadcom/blast/irq_tables.c index 6695a900aa..3f9adebec3 100644 --- a/src/mainboard/broadcom/blast/irq_tables.c +++ b/src/mainboard/broadcom/blast/irq_tables.c @@ -10,9 +10,7 @@ #include <stdint.h> #include <arch/pirq_routing.h> -extern unsigned pci1234[]; -extern unsigned sbdn; -extern unsigned hcdn[]; +#include <cpu/amd/amdk8_sysconf.h> static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, @@ -71,7 +69,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_bcm5785_0; - pirq->rtr_devfn = (sbdn<<3)|0; + pirq->rtr_devfn = (sysconf.sbdn<<3)|0; pirq->exclusive_irqs = 0; @@ -87,7 +85,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_bcm5785_0, (sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_bcm5785_0, (sysconf.sbdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; pirq->size = 32 + 16 * slot_num; diff --git a/src/mainboard/broadcom/blast/mptable.c b/src/mainboard/broadcom/blast/mptable.c index 77dc75db73..d754cb7101 100644 --- a/src/mainboard/broadcom/blast/mptable.c +++ b/src/mainboard/broadcom/blast/mptable.c @@ -8,9 +8,7 @@ #include <cpu/amd/dualcore.h> #endif -extern unsigned pci1234[]; -extern unsigned sbdn; -extern unsigned hcdn[]; +#include <cpu/amd/amdk8_sysconf.h> extern unsigned char bus_isa; extern unsigned char bus_bcm5780[7]; @@ -95,7 +93,7 @@ void *smp_write_config_table(void *v) //IDE outb(0x02, 0xc00); outb(0x0e, 0xc01); - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_bcm5785_0, ((1+sbdn)<<2)|1, apicid_bcm5785[0], 0xe); // IDE + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_bcm5785_0, ((1+sysconf.sbdn)<<2)|1, apicid_bcm5785[0], 0xe); // IDE //SATA outb(0x07, 0xc00); outb(0x0f, 0xc01); @@ -104,7 +102,7 @@ void *smp_write_config_table(void *v) //USB outb(0x01, 0xc00); outb(0x0a, 0xc01); for(i=0;i<3;i++) { - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, ((2+sbdn)<<2)|i, apicid_bcm5785[0], 0xa); // + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_bcm5785_0, ((2+sysconf.sbdn)<<2)|i, apicid_bcm5785[0], 0xa); // } diff --git a/src/mainboard/tyan/s2881/Options.lb b/src/mainboard/tyan/s2881/Options.lb index b1e5022c31..7d39b92fb5 100644 --- a/src/mainboard/tyan/s2881/Options.lb +++ b/src/mainboard/tyan/s2881/Options.lb @@ -54,6 +54,11 @@ uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses HW_MEM_HOLE_SIZEK +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + uses USE_DCACHE_RAM uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE @@ -121,6 +126,18 @@ default CONFIG_LOGICAL_CPUS=1 #CHIP_NAME ? default CONFIG_CHIP_NAME=1 +##HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0x0a + +##real SB Unit ID, default is 0x20, mean dont touch it at last +default HT_CHAIN_END_UNITID_BASE=0x06 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=0 + +##only offset for SB chain?, default is yes(1) +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + #1G memory hole default HW_MEM_HOLE_SIZEK=0x100000 diff --git a/src/mainboard/tyan/s2881/auto.c b/src/mainboard/tyan/s2881/auto.c index 87d5748514..eb1e382ee3 100644 --- a/src/mainboard/tyan/s2881/auto.c +++ b/src/mainboard/tyan/s2881/auto.c @@ -20,7 +20,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2881/cache_as_ram_auto.c b/src/mainboard/tyan/s2881/cache_as_ram_auto.c index 50c543592b..1ced1c970d 100644 --- a/src/mainboard/tyan/s2881/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2881/cache_as_ram_auto.c @@ -1,7 +1,7 @@ #define ASSEMBLY 1 #define __ROMCC__ -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -19,7 +19,19 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + #include <cpu/amd/model_fxx_rev.h> + #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -113,9 +125,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) enumerate_ht_chain(); + /* Setup the ck804 */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -127,12 +141,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); fallback_image: +// post_code(0x25); ; } #endif @@ -170,6 +186,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } +// post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); @@ -179,6 +196,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) report_bist_failure(bist); setup_s2881_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif needs_reset = setup_coherent_ht_domain(); @@ -197,6 +218,12 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) } enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif allow_all_aps_stop(bsp_apicid); @@ -207,6 +234,9 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) memreset_setup(); sdram_initialize(nodes, ctrl); +#if 0 + dump_pci_devices(); +#endif post_cache_as_ram(); } diff --git a/src/mainboard/tyan/s2881/cmos.layout b/src/mainboard/tyan/s2881/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/tyan/s2881/cmos.layout +++ b/src/mainboard/tyan/s2881/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index 01fd2e1a5f..82de11317b 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -7,6 +7,8 @@ #include <cpu/amd/dualcore.h> #endif +#include <cpu/amd/amdk8_sysconf.h> + // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default @@ -20,8 +22,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned sblk; -unsigned pci1234[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -33,9 +34,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, // 0x20202020, @@ -58,23 +57,28 @@ void get_bus_conf(void) unsigned apicid_base; device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); - - get_sblk_pci1234(); + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); - sbdn = (hcdn[0] >> 8) & 0xff; - sbdn3 = hcdn[0] & 0xff; + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + sbdn3 = sysconf.hcdn[0] & 0xff; - bus_8131_0 = (pci1234[0] >> 16) & 0xff; + bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_8111_0 = bus_8131_0; /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0)); + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); #if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE @@ -91,11 +95,6 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); -#endif } else { printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); @@ -105,6 +104,11 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif } else { printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); diff --git a/src/mainboard/tyan/s2881/irq_tables.c b/src/mainboard/tyan/s2881/irq_tables.c index ad4785b899..c428ec5dee 100644 --- a/src/mainboard/tyan/s2881/irq_tables.c +++ b/src/mainboard/tyan/s2881/irq_tables.c @@ -10,6 +10,8 @@ #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -34,8 +36,6 @@ extern unsigned char bus_8131_2; extern unsigned char bus_8111_0; extern unsigned char bus_8111_1; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern void get_bus_conf(void); @@ -67,7 +67,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_8111_0; - pirq->rtr_devfn = ((sbdn+1)<<3)|0; + pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; @@ -81,7 +81,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge // write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); diff --git a/src/mainboard/tyan/s2881/mptable.c b/src/mainboard/tyan/s2881/mptable.c index a2526c954f..e901416994 100644 --- a/src/mainboard/tyan/s2881/mptable.c +++ b/src/mainboard/tyan/s2881/mptable.c @@ -4,6 +4,8 @@ #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + extern unsigned char bus_isa; extern unsigned char bus_8131_0; extern unsigned char bus_8131_1; @@ -14,14 +16,10 @@ extern unsigned apicid_8111; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern void get_bus_conf(void); - - void *smp_write_config_table(void *v) { static const char sig[4] = "PCMP"; @@ -100,7 +98,7 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //8111 LPC ???? - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|0, apicid_8111, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|0, apicid_8111, 0x13); //On Board AMD USB ??? smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2885/Options.lb b/src/mainboard/tyan/s2885/Options.lb index 5ca7df6a34..9828e61c1e 100644 --- a/src/mainboard/tyan/s2885/Options.lb +++ b/src/mainboard/tyan/s2885/Options.lb @@ -63,6 +63,13 @@ uses ENABLE_APIC_EXT_ID uses APIC_ID_OFFSET uses LIFT_BSP_APIC_ID +uses HT_CHAIN_UNITID_BASE +uses HT_CHAIN_END_UNITID_BASE +uses SB_HT_CHAIN_ON_BUS0 +uses SB_HT_CHAIN_UNITID_OFFSET_ONLY + +uses CONFIG_LB_MEM_TOPK + ### ### Build options ### @@ -125,6 +132,18 @@ default CONFIG_LOGICAL_CPUS=1 #CHIP_NAME ? default CONFIG_CHIP_NAME=1 +##HT Unit ID offset, default is 1, the typical one +default HT_CHAIN_UNITID_BASE=0x0a + +##real SB Unit ID, default is 0x20, mean dont touch it at last +default HT_CHAIN_END_UNITID_BASE=0x06 + +#make the SB HT chain on bus 0, default is not (0) +default SB_HT_CHAIN_ON_BUS0=2 + +##only offset for SB chain?, default is yes(1) +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 + #1G memory hole default HW_MEM_HOLE_SIZEK=0x100000 diff --git a/src/mainboard/tyan/s2885/auto.c b/src/mainboard/tyan/s2885/auto.c index 1e52e4e774..f4f30737ab 100644 --- a/src/mainboard/tyan/s2885/auto.c +++ b/src/mainboard/tyan/s2885/auto.c @@ -19,7 +19,7 @@ #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" #include "northbridge/amd/amdk8/incoherent_ht.c" -#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/cpu_rev.c" #include "superio/winbond/w83627hf/w83627hf_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" diff --git a/src/mainboard/tyan/s2885/cache_as_ram_auto.c b/src/mainboard/tyan/s2885/cache_as_ram_auto.c index 13b66d8dc5..5d43c71f9a 100644 --- a/src/mainboard/tyan/s2885/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2885/cache_as_ram_auto.c @@ -13,7 +13,19 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + #include <cpu/amd/model_fxx_rev.h> + #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/amd/amd8111/amd8111_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -68,7 +80,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" @@ -113,9 +125,11 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) enumerate_ht_chain(); + /* Setup the ck804 */ amd8111_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -127,12 +141,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); fallback_image: +// post_code(0x25); ; } #endif @@ -170,15 +186,22 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } +// post_code(0x32); w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); +// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE); + /* Halt if there was a built in self test failure */ report_bist_failure(bist); setup_s2885_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif needs_reset = setup_coherent_ht_domain(); @@ -188,7 +211,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) start_other_cores(); wait_all_other_cores_started(bsp_apicid); #endif - + needs_reset |= ht_setup_chains_x(); if (needs_reset) { @@ -208,6 +231,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) memreset_setup(); sdram_initialize(nodes, ctrl); +#if 0 + dump_pci_devices(); +#endif + post_cache_as_ram(); } diff --git a/src/mainboard/tyan/s2885/cmos.layout b/src/mainboard/tyan/s2885/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/tyan/s2885/cmos.layout +++ b/src/mainboard/tyan/s2885/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index 5e8e0bd347..68ed3d2e87 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -7,6 +7,7 @@ #include <cpu/amd/dualcore.h> #endif +#include <cpu/amd/amdk8_sysconf.h> // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default @@ -22,8 +23,7 @@ unsigned apicid_8111 ; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned sblk; -unsigned pci1234[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -35,9 +35,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -61,24 +59,29 @@ void get_bus_conf(void) unsigned apicid_base; device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); - - get_sblk_pci1234(); + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); - sbdn = (hcdn[0] >> 8) & 0xff; - sbdn3 = hcdn[0] & 0xff; - sbdn5 = hcdn[1] & 0xff; + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + sbdn3 = sysconf.hcdn[0] & 0xff; + sbdn5 = sysconf.hcdn[1] & 0xff; - bus_8131_0 = (pci1234[0] >> 16) & 0xff; + bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_8111_0 = bus_8131_0; /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn,0)); + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); if (dev) { bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); #if HT_CHAIN_END_UNITID_BASE >= HT_CHAIN_UNITID_BASE @@ -95,11 +98,6 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); -#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE - bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_isa++; -// printk_debug("bus_isa=%d\n",bus_isa); -#endif } else { printk_debug("ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); @@ -109,6 +107,12 @@ void get_bus_conf(void) dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); if (dev) { bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); +#if HT_CHAIN_END_UNITID_BASE < HT_CHAIN_UNITID_BASE + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; +// printk_debug("bus_isa=%d\n",bus_isa); +#endif + } else { printk_debug("ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); @@ -116,7 +120,7 @@ void get_bus_conf(void) /* HT chain 1 */ // it is on node0, so it must be there - bus_8151_0 = (pci1234[1] >> 16) & 0xff; + bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff; /* 8151 */ dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0)); diff --git a/src/mainboard/tyan/s2885/irq_tables.c b/src/mainboard/tyan/s2885/irq_tables.c index 59c3704c83..4fc12a04ac 100644 --- a/src/mainboard/tyan/s2885/irq_tables.c +++ b/src/mainboard/tyan/s2885/irq_tables.c @@ -10,6 +10,8 @@ #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -36,8 +38,6 @@ extern unsigned char bus_8111_1; extern unsigned char bus_8151_0; extern unsigned char bus_8151_1; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern unsigned sbdn5; @@ -70,7 +70,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq->version = PIRQ_VERSION; pirq->rtr_bus = bus_8111_0; - pirq->rtr_devfn = ((sbdn+1)<<3)|0; + pirq->rtr_devfn = ((sysconf.sbdn+1)<<3)|0; pirq->exclusive_irqs = 0; @@ -84,7 +84,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) pirq_info = (void *) ( &pirq->checksum + 1); slot_num = 0; //pci bridge - write_pirq_info(pirq_info, bus_8111_0, ((sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + write_pirq_info(pirq_info, bus_8111_0, ((sysconf.sbdn+1)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; //pcix bridge // write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); diff --git a/src/mainboard/tyan/s2885/mptable.c b/src/mainboard/tyan/s2885/mptable.c index 83cbaf0e18..b126d2f60d 100644 --- a/src/mainboard/tyan/s2885/mptable.c +++ b/src/mainboard/tyan/s2885/mptable.c @@ -4,6 +4,8 @@ #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + extern unsigned char bus_isa; extern unsigned char bus_8131_0; extern unsigned char bus_8131_1; @@ -16,8 +18,6 @@ extern unsigned apicid_8111; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern unsigned sbdn5; @@ -99,9 +99,9 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_8111, 0xe); smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_8111, 0xf); //??? What - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|3, apicid_8111, 0x13); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|3, apicid_8111, 0x13); //Onboard AMD AC97 Audio - smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sbdn+1)<<2)|1, apicid_8111, 0x11); + smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_0, ((sysconf.sbdn+1)<<2)|1, apicid_8111, 0x11); // Onboard AMD USB smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13); diff --git a/src/mainboard/tyan/s2891/Config.lb b/src/mainboard/tyan/s2891/Config.lb index 67c7b3c8a9..f23e75b7e2 100644 --- a/src/mainboard/tyan/s2891/Config.lb +++ b/src/mainboard/tyan/s2891/Config.lb @@ -314,8 +314,8 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/ati/ragexl chip drivers/pci/onboard device pci 7.0 on end - # register "rom_address" = "0xfff80000" #for 512K - register "rom_address" = "0xfff00000" #for 1M + register "rom_address" = "0xfff80000" #for 512K + # register "rom_address" = "0xfff00000" #for 1M end end device pci a.0 off end # NIC diff --git a/src/mainboard/tyan/s2891/Options.lb b/src/mainboard/tyan/s2891/Options.lb index 366b745151..933390b025 100644 --- a/src/mainboard/tyan/s2891/Options.lb +++ b/src/mainboard/tyan/s2891/Options.lb @@ -54,7 +54,6 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses HW_MEM_HOLE_SIZEK -uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -74,12 +73,13 @@ uses SB_HT_CHAIN_UNITID_OFFSET_ONLY uses CONFIG_LB_MEM_TOPK + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes -#default ROM_SIZE=524288 +default ROM_SIZE=524288 #1M bytes -default ROM_SIZE=1048576 +#default ROM_SIZE=1048576 ## @@ -139,9 +139,6 @@ default CONFIG_LOGICAL_CPUS=1 #1G memory hole default HW_MEM_HOLE_SIZEK=0x100000 -#Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 - ##HT Unit ID offset, default is 1, the typical one default HT_CHAIN_UNITID_BASE=0x0 @@ -152,8 +149,7 @@ default HT_CHAIN_UNITID_BASE=0x0 default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) -default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 - +#default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 @@ -229,8 +225,8 @@ default CONFIG_ROM_STREAM = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CROSS_COMPILE)gcc-3.3.6 -m32" +default HOSTCC="gcc-3.3.6" ## ## Disable the gdb stub by default diff --git a/src/mainboard/tyan/s2891/auto.c b/src/mainboard/tyan/s2891/auto.c index e772a1ab62..be81f89e11 100644 --- a/src/mainboard/tyan/s2891/auto.c +++ b/src/mainboard/tyan/s2891/auto.c @@ -12,7 +12,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/cpu_rev.c" #define K8_HT_FREQ_1G_SUPPORT 0 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" diff --git a/src/mainboard/tyan/s2891/cache_as_ram_auto.c b/src/mainboard/tyan/s2891/cache_as_ram_auto.c index b83839a19c..aceffc33fa 100644 --- a/src/mainboard/tyan/s2891/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2891/cache_as_ram_auto.c @@ -2,7 +2,7 @@ #define __ROMCC__ //used by raminit -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -21,7 +21,19 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + #include <cpu/amd/model_fxx_rev.h> + #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" @@ -42,6 +54,7 @@ #define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1) + static void memreset_setup(void) { } @@ -92,15 +105,21 @@ static void sio_setup(void) uint32_t dword; uint8_t byte; - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + /* subject decoding*/ + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); byte |= 0x20; pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); + /* LPC Positive Decode 0 */ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0); + /* Serial 0, Serial 1 */ dword |= (1<<0) | (1<<1); pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); #if 1 + /* s2891 has onboard LPC port 80 */ + /*Hope I can enable port 80 here + It will decode port 80 to LPC, If you are using PCI post code you can not do this */ dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4); dword |= (1<<16); pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); @@ -133,6 +152,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ck804_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -144,12 +164,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist) , "b" (cpu_init_detectedx)/* inputs */ ); fallback_image: +// post_code(0x25); ; } #endif @@ -187,6 +209,8 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } +// post_code(0x32); + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); @@ -195,6 +219,10 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) report_bist_failure(bist); setup_s2891_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif needs_reset = setup_coherent_ht_domain(); @@ -211,7 +239,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) if (needs_reset) { print_info("ht reset -\r\n"); - soft_reset(); +// soft_reset(); } allow_all_aps_stop(bsp_apicid); @@ -221,9 +249,23 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) fill_mem_ctrl(nodes, ctrl, spd_addr); enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif memreset_setup(); sdram_initialize(nodes, ctrl); +#if 0 + print_pci_devices(); +#endif + +#if 0 + dump_pci_devices(); +#endif + post_cache_as_ram(); } diff --git a/src/mainboard/tyan/s2891/cmos.layout b/src/mainboard/tyan/s2891/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/tyan/s2891/cmos.layout +++ b/src/mainboard/tyan/s2891/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index aeb1ef4473..8093f96332 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -7,6 +7,7 @@ #include <cpu/amd/dualcore.h> #endif +#include <cpu/amd/amdk8_sysconf.h> // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default @@ -24,9 +25,9 @@ unsigned apicid_ck804; unsigned apicid_8131_1; unsigned apicid_8131_2; + -unsigned sblk; -unsigned pci1234[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000000, @@ -38,9 +39,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -65,27 +64,27 @@ void get_bus_conf(void) unsigned apicid_base; device_t dev; + unsigned sbdn; + int i; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); - - get_sblk_pci1234(); - - sbdn = (hcdn[0] & 0xff); // first byte of first chain + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } - sbdn3 = (hcdn[1] & 0xff); // first byte of second chain + get_sblk_pci1234(); + + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; -// bus_ck804_0 = node_link_to_bus(0, sblk); - bus_ck804_0 = (pci1234[0] >> 16) & 0xff; - - if(pci1234[2] & 1) { - bus_coproc_0 = (pci1234[2] >> 16) & 0xff; - coprocdn = (hcdn[2] & 0xff); - } + sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain + bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff; /* CK804 */ @@ -153,16 +152,14 @@ void get_bus_conf(void) dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); if (dev) { bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - bus_isa = bus_8131_0; // incase only one installed + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; } else { printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } - bus_8131_0 = (pci1234[1] >> 16) & 0xff; + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; /* 8131-1 */ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); @@ -191,7 +188,11 @@ void get_bus_conf(void) bus_isa = bus_8131_1+2; } - + if(sysconf.pci1234[2] & 1) { + bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff; + coprocdn = (sysconf.hcdn[2] & 0xff); + } + /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS==1 diff --git a/src/mainboard/tyan/s2891/irq_tables.c b/src/mainboard/tyan/s2891/irq_tables.c index b051989532..f694c85924 100644 --- a/src/mainboard/tyan/s2891/irq_tables.c +++ b/src/mainboard/tyan/s2891/irq_tables.c @@ -10,6 +10,8 @@ #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -40,10 +42,7 @@ extern unsigned char bus_8131_1;//8 extern unsigned char bus_8131_2;//9 extern unsigned char bus_coproc_0; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; -extern unsigned pci1234[]; extern unsigned coprocdn; extern void get_bus_conf(void); @@ -58,8 +57,10 @@ unsigned long write_pirq_routing_table(unsigned long addr) uint8_t sum=0; int i; + unsigned sbdn; - get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; /* Align the table to be 16 byte aligned. */ addr += 15; @@ -94,12 +95,11 @@ unsigned long write_pirq_routing_table(unsigned long addr) //pcix bridge write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - //co processor - if(pci1234[2] & 1) { - write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); - pirq_info++; slot_num++; - } + if(sysconf.pci1234[2] & 1) { + write_pirq_info(pirq_info, bus_coproc_0, (coprocdn<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); + pirq_info++; slot_num++; + } #if 0 //smbus diff --git a/src/mainboard/tyan/s2891/mptable.c b/src/mainboard/tyan/s2891/mptable.c index 8e4be7d061..b383aae2b7 100644 --- a/src/mainboard/tyan/s2891/mptable.c +++ b/src/mainboard/tyan/s2891/mptable.c @@ -4,6 +4,8 @@ #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + extern unsigned char bus_isa; extern unsigned char bus_ck804_0; //1 extern unsigned char bus_ck804_1; //2 @@ -18,8 +20,6 @@ extern unsigned apicid_ck804; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern void get_bus_conf(void); @@ -30,6 +30,7 @@ void *smp_write_config_table(void *v) static const char oem[8] = "TYAN "; static const char productid[12] = "S2891 "; struct mp_config_table *mc; + unsigned sbdn; unsigned char bus_num; int i; @@ -54,6 +55,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); get_bus_conf(); + sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -75,6 +77,7 @@ void *smp_write_config_table(void *v) smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); } + /* Initialize interrupt mapping*/ dword = 0x0000d218; pci_write_config32(dev, 0x7c, dword); @@ -83,7 +86,6 @@ void *smp_write_config_table(void *v) pci_write_config32(dev, 0x80, dword); dword = 0x0000007d; - pci_write_config32(dev, 0x84, dword); } diff --git a/src/mainboard/tyan/s2891/resourcemap.c b/src/mainboard/tyan/s2891/resourcemap.c index 625e19f11c..ad559b2ded 100644 --- a/src/mainboard/tyan/s2891/resourcemap.c +++ b/src/mainboard/tyan/s2891/resourcemap.c @@ -258,8 +258,8 @@ static void setup_s2891_resource_map(void) * This field defines the highest bus number in configuration region i */ #if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, #endif diff --git a/src/mainboard/tyan/s2892/Config.lb b/src/mainboard/tyan/s2892/Config.lb index 6fa8e5d44a..dcb0c45abf 100644 --- a/src/mainboard/tyan/s2892/Config.lb +++ b/src/mainboard/tyan/s2892/Config.lb @@ -313,8 +313,7 @@ chip northbridge/amd/amdk8/root_complex # chip drivers/ati/ragexl chip drivers/pci/onboard device pci 6.0 on end - # register "rom_address" = "0xfff80000" #for 512K - register "rom_address" = "0xfff00000" #for 1M + register "rom_address" = "0xfff80000" end chip drivers/pci/onboard device pci 8.0 on end diff --git a/src/mainboard/tyan/s2892/Options.lb b/src/mainboard/tyan/s2892/Options.lb index 30e6d617c2..92ebe2e738 100644 --- a/src/mainboard/tyan/s2892/Options.lb +++ b/src/mainboard/tyan/s2892/Options.lb @@ -54,7 +54,6 @@ uses CONFIG_CHIP_NAME uses CONFIG_CONSOLE_VGA uses CONFIG_PCI_ROM_RUN uses HW_MEM_HOLE_SIZEK -uses K8_HT_FREQ_1G_SUPPORT uses USE_DCACHE_RAM uses DCACHE_RAM_BASE @@ -66,12 +65,14 @@ uses HT_CHAIN_END_UNITID_BASE uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_LB_MEM_TOPK + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes -#default ROM_SIZE=524288 +default ROM_SIZE=524288 #1M bytes -default ROM_SIZE=1048576 +#default ROM_SIZE=1048576 ## @@ -128,12 +129,6 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 -#1G memory hole -default HW_MEM_HOLE_SIZEK=0x100000 - -#Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 - ##HT Unit ID offset, default is 1, the typical one default HT_CHAIN_UNITID_BASE=0x0 @@ -146,6 +141,9 @@ default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#1G memory hole +default HW_MEM_HOLE_SIZEK=0x100000 + #BTEXT Console #default CONFIG_CONSOLE_BTEXT=1 @@ -161,6 +159,7 @@ default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 + ## ## Build code to setup a generic IOAPIC ## diff --git a/src/mainboard/tyan/s2892/auto.c b/src/mainboard/tyan/s2892/auto.c index 07d7b5ec8b..1d19ecfafc 100644 --- a/src/mainboard/tyan/s2892/auto.c +++ b/src/mainboard/tyan/s2892/auto.c @@ -12,7 +12,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/cpu_rev.c" #define K8_HT_FREQ_1G_SUPPORT 1 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" diff --git a/src/mainboard/tyan/s2892/cache_as_ram_auto.c b/src/mainboard/tyan/s2892/cache_as_ram_auto.c index 5dd43e8bbc..4b63ffed4e 100644 --- a/src/mainboard/tyan/s2892/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2892/cache_as_ram_auto.c @@ -13,6 +13,17 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x80000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + #include <cpu/amd/model_fxx_rev.h> #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" @@ -54,7 +65,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) return smbus_read_byte(device, address); } -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #include "northbridge/amd/amdk8/raminit.c" #include "northbridge/amd/amdk8/coherent_ht.c" @@ -98,7 +109,7 @@ static void sio_setup(void) uint32_t dword; uint8_t byte; - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); byte |= 0x20; pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); @@ -106,7 +117,6 @@ static void sio_setup(void) dword |= (1<<0); pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); - } void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) { @@ -132,6 +142,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ck804_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -143,12 +154,14 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist), "b"(cpu_init_detectedx) /* inputs */ ); fallback_image: +// post_code(0x25); ; } #endif @@ -167,46 +180,42 @@ void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { - static const struct mem_controller cpu[] = { - { - .node_id = 0, - .f0 = PCI_DEV(0, 0x18, 0), - .f1 = PCI_DEV(0, 0x18, 1), - .f2 = PCI_DEV(0, 0x18, 2), - .f3 = PCI_DEV(0, 0x18, 3), - .channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 }, - .channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 }, - }, + + static const uint16_t spd_addr [] = { + (0xa<<3)|0, (0xa<<3)|2, 0, 0, + (0xa<<3)|1, (0xa<<3)|3, 0, 0, #if CONFIG_MAX_PHYSICAL_CPUS > 1 - { - .node_id = 1, - .f0 = PCI_DEV(0, 0x19, 0), - .f1 = PCI_DEV(0, 0x19, 1), - .f2 = PCI_DEV(0, 0x19, 2), - .f3 = PCI_DEV(0, 0x19, 3), - .channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 }, - .channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 }, - }, + (0xa<<3)|4, (0xa<<3)|6, 0, 0, + (0xa<<3)|5, (0xa<<3)|7, 0, 0, #endif - }; + }; - unsigned bsp_apicid = 0; int needs_reset; + unsigned bsp_apicid = 0; + + struct mem_controller ctrl[8]; + unsigned nodes; if (bist == 0) { init_cpus(cpu_init_detectedx); } - w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); +// post_code(0x32); + + w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); - - /* Halt if there was a built in self test failure */ - report_bist_failure(bist); + + /* Halt if there was a built in self test failure */ + report_bist_failure(bist); setup_s2892_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif - needs_reset = setup_coherent_ht_domain(); + needs_reset = setup_coherent_ht_domain(); wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 @@ -219,15 +228,35 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) needs_reset |= ck804_early_setup_x(); - if (needs_reset) { - print_info("ht reset -\r\n"); - soft_reset(); - } + if (needs_reset) { + print_info("ht reset -\r\n"); + soft_reset(); + } + + allow_all_aps_stop(bsp_apicid); + + nodes = get_nodes(); + //It's the time to set ctrl now; + fill_mem_ctrl(nodes, ctrl, spd_addr); + + enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif - enable_smbus(); + memreset_setup(); + sdram_initialize(nodes, ctrl); - memreset_setup(); - sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu); +#if 0 + print_pci_devices(); +#endif + +#if 0 + dump_pci_devices(); +#endif - post_cache_as_ram(); + post_cache_as_ram(); } diff --git a/src/mainboard/tyan/s2892/cmos.layout b/src/mainboard/tyan/s2892/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/tyan/s2892/cmos.layout +++ b/src/mainboard/tyan/s2892/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 6086aa5ff5..2e8a5cd337 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -7,6 +7,7 @@ #include <cpu/amd/dualcore.h> #endif +#include <cpu/amd/amdk8_sysconf.h> // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default @@ -24,8 +25,7 @@ unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned sblk; -unsigned pci1234[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -37,9 +37,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -61,23 +59,29 @@ void get_bus_conf(void) { unsigned apicid_base; + unsigned sbdn; device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if(get_bus_conf_done==1) return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); - - get_sblk_pci1234(); + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } + + get_sblk_pci1234(); - sbdn = (hcdn[0] & 0xff); // first byte of first chain + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; - sbdn3 = (hcdn[1] & 0xff); // first byte of second chain + sbdn3 = (sysconf.hcdn[1] & 0xff); // first byte of second chain -// bus_ck804_0 = node_link_to_bus(0, sblk); - bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff; /* CK804 */ @@ -145,16 +149,15 @@ void get_bus_conf(void) dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); if (dev) { bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_0 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_0++; - bus_isa = bus_8131_0; // incase only one installed + bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_isa++; } else { printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } - bus_8131_0 = (pci1234[1] >> 16) & 0xff; + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8131-1 */ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { diff --git a/src/mainboard/tyan/s2892/irq_tables.c b/src/mainboard/tyan/s2892/irq_tables.c index b4d61aaaea..a1b2b2ed37 100644 --- a/src/mainboard/tyan/s2892/irq_tables.c +++ b/src/mainboard/tyan/s2892/irq_tables.c @@ -10,6 +10,8 @@ #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -39,8 +41,6 @@ extern unsigned char bus_8131_0;//7 extern unsigned char bus_8131_1;//8 extern unsigned char bus_8131_2;//9 -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern void get_bus_conf(void); @@ -52,11 +52,13 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct irq_info *pirq_info; unsigned slot_num; uint8_t *v; + unsigned sbdn; uint8_t sum=0; int i; get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; /* Align the table to be 16 byte aligned. */ addr += 15; diff --git a/src/mainboard/tyan/s2892/mptable.c b/src/mainboard/tyan/s2892/mptable.c index e0f16d8921..4828453741 100644 --- a/src/mainboard/tyan/s2892/mptable.c +++ b/src/mainboard/tyan/s2892/mptable.c @@ -4,6 +4,8 @@ #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + extern unsigned char bus_isa; extern unsigned char bus_ck804_0; //1 extern unsigned char bus_ck804_1; //2 @@ -18,8 +20,6 @@ extern unsigned apicid_ck804; extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; @@ -29,6 +29,7 @@ void *smp_write_config_table(void *v) static const char oem[8] = "TYAN "; static const char productid[12] = "S2892 "; struct mp_config_table *mc; + unsigned sbdn; unsigned char bus_num; int i; @@ -53,6 +54,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); get_bus_conf(); + sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -74,11 +76,12 @@ void *smp_write_config_table(void *v) smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); } + /* Initialize interrupt mapping*/ + dword = 0x0000d218; pci_write_config32(dev, 0x7c, dword); dword = 0x12008a00; - pci_write_config32(dev, 0x80, dword); dword = 0x0000007d; diff --git a/src/mainboard/tyan/s2892/resourcemap.c b/src/mainboard/tyan/s2892/resourcemap.c index 5801264a16..b7d72db90e 100644 --- a/src/mainboard/tyan/s2892/resourcemap.c +++ b/src/mainboard/tyan/s2892/resourcemap.c @@ -258,8 +258,8 @@ static void setup_s2892_resource_map(void) * This field defines the highest bus number in configuration region i */ #if 1 -// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, -// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, +// PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ +// PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, #endif diff --git a/src/mainboard/tyan/s2895/Config.lb b/src/mainboard/tyan/s2895/Config.lb index 6b41829017..9afaf70d8f 100644 --- a/src/mainboard/tyan/s2895/Config.lb +++ b/src/mainboard/tyan/s2895/Config.lb @@ -2,12 +2,17 @@ ## Compute the location and size of where this firmware image ## (linuxBIOS plus bootloader) will live in the boot rom chip. ## -if USE_FALLBACK_IMAGE - default ROM_SECTION_SIZE = FALLBACK_SIZE - default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE ) +if USE_FAILOVER_IMAGE + default ROM_SECTION_SIZE = FAILOVER_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FAILOVER_SIZE ) else - default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE ) + if USE_FALLBACK_IMAGE + default ROM_SECTION_SIZE = FALLBACK_SIZE + default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) + else + default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE - FAILOVER_SIZE ) default ROM_SECTION_OFFSET = 0 + end end ## @@ -16,7 +21,6 @@ end ## default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE ) default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1) -default CONFIG_ROM_STREAM = 1 ## ## Compute where this copy of linuxBIOS will start in the boot rom @@ -31,10 +35,18 @@ default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE ) ## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE ## default XIP_ROM_SIZE=65536 -default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE ) -arch i386 end +if USE_FAILOVER_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) +else + if USE_FALLBACK_IMAGE + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE + FAILOVER_SIZE) + else + default XIP_ROM_BASE = ( _ROMBASE - XIP_ROM_SIZE + ROM_IMAGE_SIZE) + end +end +arch i386 end ## ## Build the objects we have code for in this directory. @@ -92,9 +104,16 @@ end ## ## Build our 16 bit and 32 bit linuxBIOS entry code ## -if USE_FALLBACK_IMAGE - mainboardinit cpu/x86/16bit/entry16.inc - ldscript /cpu/x86/16bit/entry16.lds +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/entry16.inc + ldscript /cpu/x86/16bit/entry16.lds + end end mainboardinit cpu/x86/32bit/entry32.inc @@ -113,12 +132,22 @@ end ## ## Build our reset vector (This is where linuxBIOS is entered) ## -if USE_FALLBACK_IMAGE +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE mainboardinit cpu/x86/16bit/reset16.inc ldscript /cpu/x86/16bit/reset16.lds + else + mainboardinit cpu/x86/32bit/reset32.inc + ldscript /cpu/x86/32bit/reset32.lds + end else + if USE_FALLBACK_IMAGE + mainboardinit cpu/x86/16bit/reset16.inc + ldscript /cpu/x86/16bit/reset16.lds + else mainboardinit cpu/x86/32bit/reset32.inc ldscript /cpu/x86/32bit/reset32.lds + end end if USE_DCACHE_RAM @@ -136,13 +165,18 @@ ldscript /southbridge/nvidia/ck804/id.lds ## ## ROMSTRAP table for CK804 ## -if USE_FALLBACK_IMAGE +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE mainboardinit southbridge/nvidia/ck804/romstrap.inc ldscript /southbridge/nvidia/ck804/romstrap.lds + end +else + if USE_FALLBACK_IMAGE + mainboardinit southbridge/nvidia/ck804/romstrap.inc + ldscript /southbridge/nvidia/ck804/romstrap.lds + end end - - if USE_DCACHE_RAM ## ## Setup Cache-As-Ram @@ -155,12 +189,20 @@ end ### Things are delicate and we test to see if we should ### failover to another image. ### -if USE_FALLBACK_IMAGE - ldscript /arch/i386/lib/failover.lds +if HAVE_FAILOVER_BOOT + if USE_FAILOVER_IMAGE + if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover_failover.lds + end + end +else + if USE_FALLBACK_IMAGE if USE_DCACHE_RAM + ldscript /arch/i386/lib/failover.lds else - mainboardinit ./failover.inc + mainboardinit ./failover.inc end + end end ## diff --git a/src/mainboard/tyan/s2895/Options.lb b/src/mainboard/tyan/s2895/Options.lb index cd367ad029..b1ee5367e8 100644 --- a/src/mainboard/tyan/s2895/Options.lb +++ b/src/mainboard/tyan/s2895/Options.lb @@ -2,6 +2,8 @@ uses HAVE_MP_TABLE uses HAVE_PIRQ_TABLE uses USE_FALLBACK_IMAGE uses HAVE_FALLBACK_BOOT +uses USE_FAILOVER_IMAGE +uses HAVE_FAILOVER_BOOT uses HAVE_HARD_RESET uses IRQ_SLOT_COUNT uses HAVE_OPTION_TABLE @@ -11,6 +13,7 @@ uses CONFIG_LOGICAL_CPUS uses CONFIG_IOAPIC uses CONFIG_SMP uses FALLBACK_SIZE +uses FAILOVER_SIZE uses ROM_SIZE uses ROM_SECTION_SIZE uses ROM_IMAGE_SIZE @@ -60,6 +63,8 @@ uses DCACHE_RAM_BASE uses DCACHE_RAM_SIZE uses CONFIG_USE_INIT +uses SERIAL_CPU_INIT + uses ENABLE_APIC_EXT_ID uses APIC_ID_OFFSET uses LIFT_BSP_APIC_ID @@ -69,28 +74,34 @@ uses HT_CHAIN_END_UNITID_BASE uses SB_HT_CHAIN_ON_BUS0 uses SB_HT_CHAIN_UNITID_OFFSET_ONLY +uses CONFIG_LB_MEM_TOPK + ## ROM_SIZE is the size of boot ROM that this board will use. #512K bytes -#default ROM_SIZE=524288 +default ROM_SIZE=524288 #1M bytes -default ROM_SIZE=1048576 +#default ROM_SIZE=1048576 ## ## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use ## #default FALLBACK_SIZE=131072 -#256K -default FALLBACK_SIZE=0x40000 +#default FALLBACK_SIZE=0x40000 -### -### Build options -### +#FALLBACK: 256K-4K +default FALLBACK_SIZE=0x3f000 +#FAILOVER: 4K +default FAILOVER_SIZE=0x01000 + +#more 1M for pgtbl +default CONFIG_LB_MEM_TOPK=2048 ## ## Build code for the fallback boot ## default HAVE_FALLBACK_BOOT=1 +default HAVE_FAILOVER_BOOT=1 ## ## Build code to reset the motherboard from linuxBIOS @@ -130,15 +141,14 @@ default CONFIG_MAX_CPUS=4 default CONFIG_MAX_PHYSICAL_CPUS=2 default CONFIG_LOGICAL_CPUS=1 +default SERIAL_CPU_INIT=0 + #CHIP_NAME ? #default CONFIG_CHIP_NAME=1 #1G memory hole default HW_MEM_HOLE_SIZEK=0x100000 -#Opteron K8 1G HT Support -default K8_HT_FREQ_1G_SUPPORT=1 - ##HT Unit ID offset, default is 1, the typical one default HT_CHAIN_UNITID_BASE=0x0 @@ -151,6 +161,9 @@ default SB_HT_CHAIN_ON_BUS0=2 ##only offset for SB chain?, default is yes(1) default SB_HT_CHAIN_UNITID_OFFSET_ONLY=0 +#Opteron K8 1G HT Support +default K8_HT_FREQ_1G_SUPPORT=1 + #VGA default CONFIG_CONSOLE_VGA=1 default CONFIG_PCI_ROM_RUN=1 @@ -163,7 +176,7 @@ default DCACHE_RAM_BASE=0xcf000 default DCACHE_RAM_SIZE=0x1000 default CONFIG_USE_INIT=0 -default ENABLE_APIC_EXT_ID=1 +default ENABLE_APIC_EXT_ID=0 default APIC_ID_OFFSET=0x10 default LIFT_BSP_APIC_ID=0 @@ -201,12 +214,12 @@ default HEAP_SIZE=0x4000 ## ## Only use the option table in a normal image ## -default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE +default USE_OPTION_TABLE = (!USE_FALLBACK_IMAGE) && (!USE_FAILOVER_IMAGE ) ## ## LinuxBIOS C code runs at this location in RAM ## -default _RAMBASE=0x00004000 +default _RAMBASE=0x00100000 ## ## Load the payload from the ROM @@ -220,8 +233,8 @@ default CONFIG_ROM_STREAM = 1 ## ## The default compiler ## -default CC="$(CROSS_COMPILE)gcc -m32" -default HOSTCC="gcc" +default CC="$(CROSS_COMPILE)gcc-4.0.2 -m32" +default HOSTCC="gcc-4.0.2" ## ## Disable the gdb stub by default diff --git a/src/mainboard/tyan/s2895/auto.c b/src/mainboard/tyan/s2895/auto.c index 5bfc6bf680..8c11f30fa7 100644 --- a/src/mainboard/tyan/s2895/auto.c +++ b/src/mainboard/tyan/s2895/auto.c @@ -13,7 +13,7 @@ #include "arch/i386/lib/console.c" #include "ram/ramtest.c" -#include <cpu/amd/model_fxx_rev.h> +#include "northbridge/amd/amdk8/cpu_rev.c" //#define K8_HT_FREQ_1G_SUPPORT 1 #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" @@ -23,7 +23,7 @@ #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" #include "northbridge/amd/amdk8/debug.c" -#include <cpu/amd/model_fxx_msr.h> +#include "cpu/amd/model_fxx/model_fxx_msr.h" #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" #include "cpu/amd/mtrr/amd_earlymtrr.c" diff --git a/src/mainboard/tyan/s2895/cache_as_ram_auto.c b/src/mainboard/tyan/s2895/cache_as_ram_auto.c index 299f345b71..576bebebfa 100644 --- a/src/mainboard/tyan/s2895/cache_as_ram_auto.c +++ b/src/mainboard/tyan/s2895/cache_as_ram_auto.c @@ -6,7 +6,7 @@ //#define K8_SCAN_PCI_BUS 1 -#define K8_4RANK_DIMM_SUPPORT 1 +#define QRANK_DIMM_SUPPORT 1 #if CONFIG_LOGICAL_CPUS==1 #define SET_NB_CFG_54 1 @@ -21,30 +21,53 @@ #include <cpu/x86/lapic.h> #include "option_table.h" #include "pc80/mc146818rtc_early.c" + +#if USE_FAILOVER_IMAGE==0 #include "pc80/serial.c" #include "arch/i386/lib/console.c" #include "ram/ramtest.c" +#if 0 +static void post_code(uint8_t value) { +#if 1 + int i; + for(i=0;i<0x8000;i++) { + outb(value, 0x80); + } +#endif +} +#endif + #include <cpu/amd/model_fxx_rev.h> + #include "northbridge/amd/amdk8/incoherent_ht.c" #include "southbridge/nvidia/ck804/ck804_early_smbus.c" #include "northbridge/amd/amdk8/raminit.h" #include "cpu/amd/model_fxx/apic_timer.c" #include "lib/delay.c" -#if CONFIG_USE_INIT == 0 -#include "lib/memcpy.c" #endif #include "cpu/x86/lapic/boot_cpu.c" #include "northbridge/amd/amdk8/reset_test.c" -#include "northbridge/amd/amdk8/debug.c" #include "superio/smsc/lpc47b397/lpc47b397_early_serial.c" +#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" +#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) + +#define SUPERIO_GPIO_IO_BASE 0x400 + +#if USE_FAILOVER_IMAGE==0 -#include "cpu/amd/mtrr/amd_earlymtrr.c" #include "cpu/x86/bist.h" -#include "superio/smsc/lpc47b397/lpc47b397_early_gpio.c" +#if CONFIG_USE_INIT == 0 +#include "lib/memcpy.c" +#endif + +#include "northbridge/amd/amdk8/debug.c" + +#include "cpu/amd/mtrr/amd_earlymtrr.c" + #include "northbridge/amd/amdk8/setup_resource_map.c" @@ -58,9 +81,6 @@ static void memreset(int controllers, const struct mem_controller *ctrl) { } -#define SUPERIO_GPIO_DEV PNP_DEV(0x2e, LPC47B397_RT) - -#define SUPERIO_GPIO_IO_BASE 0x400 static void sio_gpio_setup(void){ @@ -94,6 +114,7 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/dualcore/dualcore.c" #define CK804_NUM 2 +#define CK804B_BUSN 0x80 #define CK804_USE_NIC 1 #define CK804_USE_ACI 1 @@ -116,8 +137,9 @@ static inline int spd_read_byte(unsigned device, unsigned address) #include "cpu/amd/model_fxx/init_cpus.c" +#endif -#if USE_FALLBACK_IMAGE == 1 +#if ((HAVE_FAILOVER_BOOT==1) && (USE_FAILOVER_IMAGE == 1)) || ((HAVE_FAILOVER_BOOT==0) && (USE_FALLBACK_IMAGE == 1)) #include "southbridge/nvidia/ck804/ck804_enable_rom.c" #include "northbridge/amd/amdk8/early_ht.c" @@ -133,7 +155,7 @@ static void sio_setup(void) pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xac, 0x047f0400); - byte = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); + byte = pci_read_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b); byte |= 0x20; pci_write_config8(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0x7b, byte); @@ -141,13 +163,14 @@ static void sio_setup(void) dword |= (1<<29)|(1<<0); pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa0, dword); -#if 1 + dword = pci_read_config32(PCI_DEV(0, CK804_DEVN_BASE+1, 0), 0xa4); + dword |= (1<<16); + pci_write_config32(PCI_DEV(0, CK804_DEVN_BASE+1 , 0), 0xa4, dword); + lpc47b397_enable_serial(SUPERIO_GPIO_DEV, SUPERIO_GPIO_IO_BASE); - value = lpc47b397_gpio_offset_in(SUPERIO_GPIO_IO_BASE, 0x77); value &= 0xbf; lpc47b397_gpio_offset_out(SUPERIO_GPIO_IO_BASE, 0x77, value); -#endif } @@ -175,6 +198,7 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) ck804_enable_rom(); /* Is this a deliberate reset by the bios */ +// post_code(0x22); if (bios_reset_detected() && last_boot_normal_x) { goto normal_image; } @@ -186,28 +210,43 @@ void failover_process(unsigned long bist, unsigned long cpu_init_detectedx) goto fallback_image; } normal_image: +// post_code(0x23); __asm__ volatile ("jmp __normal_image" : /* outputs */ : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ ); fallback_image: +// post_code(0x25); +#if HAVE_FAILOVER_BOOT==1 + __asm__ volatile ("jmp __fallback_image" + : /* outputs */ + : "a" (bist), "b" (cpu_init_detectedx) /* inputs */ + ) +#endif ; } #endif - void real_main(unsigned long bist, unsigned long cpu_init_detectedx); void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx) { - -#if USE_FALLBACK_IMAGE == 1 - failover_process(bist, cpu_init_detectedx); +#if HAVE_FAILOVER_BOOT==1 + #if USE_FAILOVER_IMAGE==1 + failover_process(bist, cpu_init_detectedx); + #else + real_main(bist, cpu_init_detectedx); + #endif +#else + #if USE_FALLBACK_IMAGE == 1 + failover_process(bist, cpu_init_detectedx); + #endif + real_main(bist, cpu_init_detectedx); #endif - real_main(bist, cpu_init_detectedx); - } +#if USE_FAILOVER_IMAGE==0 + void real_main(unsigned long bist, unsigned long cpu_init_detectedx) { static const uint16_t spd_addr [] = { @@ -229,6 +268,8 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) bsp_apicid = init_cpus(cpu_init_detectedx); } +// post_code(0x32); + lpc47b397_enable_serial(SERIAL_DEV, TTYS0_BASE); uart_init(); console_init(); @@ -236,15 +277,21 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) /* Halt if there was a built in self test failure */ report_bist_failure(bist); - setup_s2895_resource_map(); + sio_gpio_setup(); + + setup_mb_resource_map(); +#if 0 + dump_pci_device(PCI_DEV(0, 0x18, 0)); + dump_pci_device(PCI_DEV(0, 0x19, 0)); +#endif needs_reset = setup_coherent_ht_domain(); - wait_all_core0_started(); + wait_all_core0_started(); #if CONFIG_LOGICAL_CPUS==1 // It is said that we should start core1 after all core0 launched start_other_cores(); - wait_all_other_cores_started(bsp_apicid); + wait_all_other_cores_started(bsp_apicid); #endif needs_reset |= ht_setup_chains_x(); @@ -253,7 +300,7 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) if (needs_reset) { print_info("ht reset -\r\n"); - soft_reset(); + // soft_reset(); } allow_all_aps_stop(bsp_apicid); @@ -263,9 +310,24 @@ void real_main(unsigned long bist, unsigned long cpu_init_detectedx) fill_mem_ctrl(nodes, ctrl, spd_addr); enable_smbus(); +#if 0 + dump_spd_registers(&cpu[0]); +#endif +#if 0 + dump_smbus_registers(); +#endif memreset_setup(); sdram_initialize(nodes, ctrl); +#if 0 + print_pci_devices(); +#endif + +#if 0 + dump_pci_devices(); +#endif + post_cache_as_ram(); } +#endif diff --git a/src/mainboard/tyan/s2895/cmos.layout b/src/mainboard/tyan/s2895/cmos.layout index 5eb88b9a5a..c1f3d75316 100644 --- a/src/mainboard/tyan/s2895/cmos.layout +++ b/src/mainboard/tyan/s2895/cmos.layout @@ -78,10 +78,10 @@ enumerations 7 9 Fallback_HDD 7 10 Fallback_Floppy #7 3 ROM -8 0 DDR400 -8 1 DDR333 -8 2 DDR266 -8 3 DDR200 +8 0 200Mhz +8 1 166Mhz +8 2 133Mhz +8 3 100Mhz 9 0 off 9 1 87.5% 9 2 75.0% diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index 3decafb71e..4d1451a92f 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -7,6 +7,8 @@ #include <cpu/amd/dualcore.h> #endif +#include <cpu/amd/amdk8_sysconf.h> + // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default @@ -31,8 +33,7 @@ unsigned apicid_8131_2; unsigned apicid_ck804b; -unsigned sblk; -unsigned pci1234[] = +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail 0x0000ff0, @@ -44,9 +45,7 @@ unsigned pci1234[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hc_possible_num; -unsigned sbdn; -unsigned hcdn[] = +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, @@ -68,25 +67,31 @@ void get_bus_conf(void) { unsigned apicid_base; + unsigned sbdn; device_t dev; + int i; + + if(get_bus_conf_done==1) return; //do it only once + + get_bus_conf_done = 1; - if(get_bus_conf_done==1) return; //do it only once + sysconf.hc_possible_num = sizeof(pci1234x)/sizeof(pci1234x[0]); + for(i=0;i<sysconf.hc_possible_num; i++) { + sysconf.pci1234[i] = pci1234x[i]; + sysconf.hcdn[i] = hcdnx[i]; + } - get_bus_conf_done = 1; + get_sblk_pci1234(); - hc_possible_num = sizeof(pci1234)/sizeof(pci1234[0]); - - get_sblk_pci1234(); - - sbdn = (hcdn[0] & 0xff); // first byte of first chain + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); // first byte of first chain + sbdn = sysconf.sbdn; - sbdn3 = (hcdn[1] & 0xff); + sbdn3 = (sysconf.hcdn[1] & 0xff); - sbdnb = (hcdn[2] & 0xff); // first byte of second chain + sbdnb = (sysconf.hcdn[2] & 0xff); // first byte of second chain -// bus_ck804_0 = node_link_to_bus(0, sblk); - bus_ck804_0 = (pci1234[0] >> 16) & 0xff; + bus_ck804_0 = (sysconf.pci1234[0] >> 16) & 0xff; /* CK804 */ dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); @@ -158,7 +163,7 @@ void get_bus_conf(void) printk_debug("ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); } - bus_8131_0 = (pci1234[1] >> 16) & 0xff; + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; /* 8131-1 */ dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); if (dev) { @@ -187,8 +192,8 @@ void get_bus_conf(void) /* CK804b */ - if(pci1234[2] & 0xf) { //if the second cpu is installed - bus_ck804b_0 = (pci1234[2]>>16) & 0xff; + if(sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed + bus_ck804b_0 = (sysconf.pci1234[2]>>16) & 0xff; #if 0 dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); if (dev) { diff --git a/src/mainboard/tyan/s2895/irq_tables.c b/src/mainboard/tyan/s2895/irq_tables.c index 5ed428ff9f..1779644c12 100644 --- a/src/mainboard/tyan/s2895/irq_tables.c +++ b/src/mainboard/tyan/s2895/irq_tables.c @@ -10,6 +10,8 @@ #include <stdint.h> #include <arch/pirq_routing.h> +#include <cpu/amd/amdk8_sysconf.h> + static void write_pirq_info(struct irq_info *pirq_info, uint8_t bus, uint8_t devfn, uint8_t link0, uint16_t bitmap0, uint8_t link1, uint16_t bitmap1, uint8_t link2, uint16_t bitmap2,uint8_t link3, uint16_t bitmap3, uint8_t slot, uint8_t rfu) @@ -44,10 +46,7 @@ extern unsigned char bus_ck804b_3;//d extern unsigned char bus_ck804b_4;//e extern unsigned char bus_ck804b_5;//f -extern unsigned pci1234[]; -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern unsigned sbdnb; @@ -58,11 +57,13 @@ unsigned long write_pirq_routing_table(unsigned long addr) struct irq_info *pirq_info; unsigned slot_num; uint8_t *v; + unsigned sbdn; uint8_t sum=0; int i; get_bus_conf(); // it will find out all bus num and apic that share with mptable.c and mptable.c and acpi_tables.c + sbdn = sysconf.sbdn; /* Align the table to be 16 byte aligned. */ addr += 15; @@ -98,7 +99,7 @@ unsigned long write_pirq_routing_table(unsigned long addr) write_pirq_info(pirq_info, bus_8131_0, (sbdn3<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0, 0); pirq_info++; slot_num++; - if(pci1234[2] & 0xf) { + if(sysconf.pci1234[2] & 0xf) { //second pci beidge write_pirq_info(pirq_info, bus_ck804b_0, ((sbdnb+9)<<3)|0, 0x1, 0xdef8, 0x2, 0xdef8, 0x3, 0xdef8, 0x4, 0xdef8, 0x0, 0); pirq_info++; slot_num++; diff --git a/src/mainboard/tyan/s2895/mptable.c b/src/mainboard/tyan/s2895/mptable.c index a41cbcd12f..2d9313ea08 100644 --- a/src/mainboard/tyan/s2895/mptable.c +++ b/src/mainboard/tyan/s2895/mptable.c @@ -4,6 +4,8 @@ #include <string.h> #include <stdint.h> +#include <cpu/amd/amdk8_sysconf.h> + extern unsigned char bus_isa; extern unsigned char bus_ck804_0; //1 extern unsigned char bus_ck804_1; //2 @@ -25,10 +27,6 @@ extern unsigned apicid_8131_1; extern unsigned apicid_8131_2; extern unsigned apicid_ck804b; -extern unsigned pci1234[]; - -extern unsigned sbdn; -extern unsigned hcdn[]; extern unsigned sbdn3; extern unsigned sbdnb; @@ -38,6 +36,7 @@ void *smp_write_config_table(void *v) static const char oem[8] = "TYAN "; static const char productid[12] = "S2895 "; struct mp_config_table *mc; + unsigned sbdn; unsigned char bus_num; int i; @@ -62,6 +61,7 @@ void *smp_write_config_table(void *v) smp_write_processors(mc); get_bus_conf(); + sbdn = sysconf.sbdn; /*Bus: Bus ID Type*/ /* define bus and isa numbers */ @@ -83,6 +83,7 @@ void *smp_write_config_table(void *v) smp_write_ioapic(mc, apicid_ck804, 0x11, res->base); } + /* Initialize interrupt mapping*/ dword = 0x0000d218; pci_write_config32(dev, 0x7c, dword); @@ -110,7 +111,7 @@ void *smp_write_config_table(void *v) } } - if(pci1234[2] & 0xf) { + if(sysconf.pci1234[2] & 0xf) { dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x1,0)); if (dev) { res = find_resource(dev, PCI_BASE_ADDRESS_1); @@ -181,7 +182,7 @@ void *smp_write_config_table(void *v) smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804_1, (0x04<<2)|i, apicid_ck804, 0x10 + (0+i)%4); } - if(pci1234[2] & 0xf) { + if(sysconf.pci1234[2] & 0xf) { //Onboard ck804b NIC smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_ck804b_0, ((sbdnb+0x0a)<<2)|0, apicid_ck804b, 0x15);//24+4+4+21=53 diff --git a/src/mainboard/tyan/s2895/resourcemap.c b/src/mainboard/tyan/s2895/resourcemap.c index f35252c085..9de9b2e107 100644 --- a/src/mainboard/tyan/s2895/resourcemap.c +++ b/src/mainboard/tyan/s2895/resourcemap.c @@ -3,7 +3,7 @@ * */ -static void setup_s2895_resource_map(void) +static void setup_mb_resource_map(void) { static const unsigned int register_values[] = { /* Careful set limit registers before base registers which contain the enables */ @@ -183,7 +183,7 @@ static void setup_s2895_resource_map(void) * [31:25] Reserved */ PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x00007000, - PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, + PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x01fff001, // need to talk to ANALOG of second CK804 to release PCI E reset PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000, PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000, @@ -253,10 +253,10 @@ static void setup_s2895_resource_map(void) * [31:24] Bus Number Limit i * This field defines the highest bus number in configuration region i */ - PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, - PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, - PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, - PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x07000003, /* link 0 of cpu 0 --> Nvidia CK 804 Pro */ + PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x7f080203, /* link 2 of cpu 0 --> AMD8131 */ + PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0xff800013, /* link 0 of cpu 1 --> Nvidia CK 804 Slave */ + PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x00000000, /*113 link 1 of cpu 1 --> HT connector */ }; diff --git a/targets/tyan/s2895/Config.lb b/targets/tyan/s2895/Config.lb index c6ef62fb0a..73ca4759ea 100644 --- a/targets/tyan/s2895/Config.lb +++ b/targets/tyan/s2895/Config.lb @@ -8,13 +8,14 @@ mainboard tyan/s2895 # Tyan s2895 romimage "normal" # 48K for SCSI FW -# option ROM_SIZE = 512*1024-48*1024 +# option ROM_SIZE = 475136 # 48K for SCSI FW and 48K for ATI ROM -# option ROM_SIZE = 512*1024-48*1024-48*1024 +# option ROM_SIZE = 425984 # 64K for Etherboot -# option ROM_SIZE = 512*1024-64*1024 +# option ROM_SIZE = 458752 # 64K for NIC option 48K for Raid option rom -# option ROM_SIZE = 512*1024-64*1024-48*1024 +# option ROM_SIZE = 409600 + option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=0 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 @@ -44,6 +45,7 @@ romimage "normal" end romimage "fallback" + option USE_FAILOVER_IMAGE=0 option USE_FALLBACK_IMAGE=1 # option ROM_IMAGE_SIZE=0x11800 # option ROM_IMAGE_SIZE=0x13800 @@ -69,4 +71,14 @@ romimage "fallback" # payload ../../../payloads/tg3--eepro100--e1000--filo_hda2.zelf end -buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" +romimage "failover" + option USE_FAILOVER_IMAGE=1 + option USE_FALLBACK_IMAGE=0 + option ROM_IMAGE_SIZE=FAILOVER_SIZE + option XIP_ROM_SIZE=FAILOVER_SIZE + option LINUXBIOS_EXTRA_VERSION="$(shell cat ../../VERSION)_Failover" +end + + +buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" "failover" +#buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback" |