summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJustin TerAvest <teravest@chromium.org>2018-02-20 13:49:55 -0700
committerMartin Roth <martinroth@google.com>2018-02-22 17:16:51 +0000
commitf6106718a80474d35ce17c35195844afb7ced0a9 (patch)
tree7e3d80775fd3fd64a6175c3465212bc99548ec4e
parentbf0a67f3ee393eaeb9bf2a63b74b3e2f0aa3e906 (diff)
downloadcoreboot-f6106718a80474d35ce17c35195844afb7ced0a9.tar.xz
mb/google/kahlee: Use GPIO macros for baseboard
This commit uses newly defined macros to make it easier to read which iomux function pads are being configured to use. TEST=Booted grunt, confirmed display backlight came on. BUG=b:72875858 Change-Id: I24e5091fc7ef696f8e9c932ce04664e6cc3ccb90 Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/23830 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
-rw-r--r--src/mainboard/google/kahlee/variants/baseboard/gpio.c146
1 files changed, 71 insertions, 75 deletions
diff --git a/src/mainboard/google/kahlee/variants/baseboard/gpio.c b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
index fb7ae96d13..de70be40d3 100644
--- a/src/mainboard/google/kahlee/variants/baseboard/gpio.c
+++ b/src/mainboard/google/kahlee/variants/baseboard/gpio.c
@@ -13,7 +13,6 @@
* GNU General Public License for more details.
*/
-#include <amdblocks/agesawrapper.h>
#include <baseboard/variants.h>
#include <soc/gpio.h>
#include <soc/smi.h>
@@ -21,101 +20,98 @@
#include <stdlib.h>
/*
- * These settings were generated by a spreadsheet. If they need to be updated,
- * update the spreadsheet shared with the Grunt development team.
- *
* As a rule of thumb, GPIO pins used by coreboot should be initialized at
* bootblock while GPIO pins used only by the OS should be initialized at
* ramstage.
*/
const static struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = {
/* GPIO_0 - EC_PCH_PWR_BTN_ODL */
- { GPIO_0, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_0, PWR_BTN_L, PULL_UP),
/* GPIO_1 - SYS_RST_ODL */
- { GPIO_1, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_1, SYS_RESET_L, PULL_UP),
/* GPIO_3 - MEM_VOLT_SEL */
- { GPIO_3, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_3, PULL_UP),
/* GPIO_4 - EN_PP3300_WLAN */
- { GPIO_4, Function0, OUTPUT_H },
+ PAD_GPO(GPIO_4, HIGH),
/* GPIO_5 - PCH_TRACKPAD_INT_3V3_ODL, SCI */
- { GPIO_5, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_5, PULL_UP),
/* GPIO_6 - APU_RST_L / EC_SMI_ODL, SMI */
- { GPIO_6, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_6, PULL_UP),
/* GPIO_7 - APU_PWROK_OD (currently not used) */
- { GPIO_7, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_7, PULL_UP),
/* GPIO_8 - DDR_ALERT_3V3_L (currently not used) */
- { GPIO_8, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_8, PULL_UP),
/* GPIO_9 - H1_PCH_INT_ODL, SCI */
- { GPIO_9, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_9, PULL_UP),
/* GPIO_11 - TOUCHSCREEN_INT_3V3_ODL, SCI */
- { GPIO_11, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_11, PULL_UP),
/* GPIO_14 - APU_HP_INT_ODL, SCI */
- { GPIO_14, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_14, PULL_UP),
/* GPIO_15 - EC_IN_RW_OD */
- { GPIO_15, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_15, PULL_UP),
/* GPIO_19 - APU_I2C_SCL3 (Touchscreen) */
- { GPIO_19, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_19, I2C3_SCL, PULL_UP),
/* GPIO_20 - APU_I2C_SDA3 (Touchscreen) */
- { GPIO_20, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_20, I2C3_SDA, PULL_UP),
/* GPIO_21 - APU_PEN_INT_ODL, SCI */
- { GPIO_21, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_21, PULL_UP),
/* GPIO_22 - EC_SCI_ODL, SCI */
- { GPIO_22, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_22, PULL_UP),
/* GPIO_23 - ACOK_OD */
/* GPIO_24 - USB_A1_OC_ODL */
- { GPIO_24, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_24, USB_OC3_L, PULL_UP),
/* GPIO_25 - SD_CD */
- { GPIO_25, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_25, SD0_CD, PULL_UP),
/* GPIO_26 - APU_PCIE_RST_L */
- { GPIO_26, Function0, INPUT },
+ PAD_NF(GPIO_26, PCIE_RST_L, PULL_NONE),
/* GPIO_40 - EMMC_BRIDGE_RST_L */
- { GPIO_40, Function0, OUTPUT_H },
+ PAD_GPO(GPIO_40, HIGH),
/* GPIO_42 - S5_MUX_CTRL */
- { GPIO_42, Function0, INPUT },
+ PAD_NF(GPIO_42, S5_MUX_CTRL, PULL_NONE),
/* GPIO_70 - WLAN_PE_RST_L */
- { GPIO_70, Function0, OUTPUT_H },
+ PAD_GPO(GPIO_70, HIGH),
/* GPIO_74 - LPC_CLK0_EC_R */
- { GPIO_74, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT },
+ PAD_NF(GPIO_74, LPCCLK0, PULL_DOWN),
/* GPIO_84 - HUB_RST (Active High) */
- { GPIO_84, Function1, OUTPUT_L },
+ PAD_GPO(GPIO_84, LOW),
/* GPIO_85 - TOUCHSCREEN_RST (Active High) */
- { GPIO_85, Function1, OUTPUT_L },
+ PAD_GPO(GPIO_85, LOW),
/* GPIO_87 - LPC_SERIRQ */
- { GPIO_87, Function0, INPUT },
+ PAD_NF(GPIO_87, SERIRQ, PULL_NONE),
/* GPIO_88 - LPC_CLKRUN_L */
- { GPIO_88, Function0, INPUT },
+ PAD_NF(GPIO_88, LPC_CLKRUN_L, PULL_NONE),
/* GPIO_92 - WLAN_PCIE_CLKREQ_3V3_ODL */
- { GPIO_92, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_92, CLK_REQ0_L, PULL_UP),
/* GPIO_93 - EMMC_RST_L */
- { GPIO_93, Function1, OUTPUT_H },
+ PAD_GPO(GPIO_93, HIGH),
/* GPIO_95 - SD_CLK */
/* GPIO_96 - SD_CMD */
@@ -125,137 +121,137 @@ const static struct soc_amd_stoneyridge_gpio gpio_set_stage_reset[] = {
/* GPIO_100 - SD_D3 */
/* GPIO_101 - SD_WP_L */
- { GPIO_101, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT },
+ PAD_NF(GPIO_101, SD0_WP, PULL_DOWN),
/* GPIO_116 - PCIE_EMMC_CLKREQ_L */
- { GPIO_116, Function0, INPUT },
+ PAD_NF(GPIO_116, CLK_REQ2_L, PULL_NONE),
/* GPIO_117 - PCH_SPI_CLK_R */
/* GPIO_118 - PCH_SPI_CS0_L */
- { GPIO_118, Function0, INPUT },
+ PAD_NF(GPIO_118, SPI_CS1_L, PULL_NONE),
/* GPIO_119 - SPK_PA_EN */
- { GPIO_119, Function2, OUTPUT_H },
+ PAD_GPO(GPIO_119, HIGH),
/* GPIO_120 - PCH_SPI_MISO */
/* GPIO_121 - PCH_SPI_MOSI */
/* GPIO_122 - APU_BIOS_FLASH_WP_L */
- { GPIO_122, Function1, INPUT },
+ PAD_GPI(GPIO_122, PULL_NONE),
/* GPIO_126 - DMIC_CLK2_EN */
- { GPIO_126, Function1, OUTPUT_H },
+ PAD_GPO(GPIO_126, HIGH),
/* GPIO_129 - APU_KBRST_L */
- { GPIO_129, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_129, KBRST_L, PULL_UP),
/* GPIO_131 - CONFIG_STRAP3 */
- { GPIO_131, Function3, INPUT },
+ PAD_GPI(GPIO_131, PULL_NONE),
/* GPIO_132 - CONFIG_STRAP4 */
- { GPIO_132, Function2, INPUT },
+ PAD_GPI(GPIO_132, PULL_NONE),
/* GPIO_133 - APU_EDP_BKLTEN_L (backlight - Active LOW) */
- { GPIO_133, Function1, OUTPUT_L },
+ PAD_GPO(GPIO_133, LOW),
/* GPIO_136 - UART_PCH_RX_DEBUG_TX */
- { GPIO_136, Function0, INPUT },
+ PAD_NF(GPIO_136, UART0_RXD, PULL_NONE),
/* GPIO_137 - AUDIO_CLK_EN (Remove in EVT?) */
- { GPIO_137, Function1, OUTPUT_H },
+ PAD_GPO(GPIO_137, HIGH),
/* GPIO_138 - UART_PCH_TX_DEBUG_RX */
- { GPIO_138, Function0, INPUT },
+ PAD_NF(GPIO_138, UART0_TXD, PULL_NONE),
/* GPIO_139 - CONFIG_STRAP1 */
- { GPIO_139, Function1, INPUT },
+ PAD_GPI(GPIO_139, PULL_NONE),
/* GPIO_140 - I2S_BCLK_R (init to func0, used for I2S) */
- { GPIO_140, Function0, INPUT },
+ PAD_NF(GPIO_140, UART1_CTS_L, PULL_NONE),
/* GPIO_141 - I2S2_DATA_MIC2 (init to func0, used for I2S) */
- { GPIO_141, Function0, INPUT },
+ PAD_NF(GPIO_141, UART1_RXD, PULL_NONE),
/* GPIO_142 - CONFIG_STRAP2 */
- { GPIO_142, Function1, INPUT },
+ PAD_GPI(GPIO_142, PULL_NONE),
/* GPIO_143 - I2S2_DATA (init to func0, used for I2S) */
- { GPIO_143, Function0, INPUT },
+ PAD_NF(GPIO_143, UART1_TXD, PULL_NONE),
/* GPIO_144 - I2S_LR_R (init to func0, used for I2S) */
- { GPIO_144, Function0, INPUT },
+ PAD_NF(GPIO_144, UART1_INTR, PULL_NONE),
/* GPIO_145 - PCH_I2C_AUDIO_SCL */
- { GPIO_145, Function0, INPUT },
+ PAD_NF(GPIO_145, I2C0_SCL, PULL_NONE),
/* GPIO_146 - PCH_I2C_AUDIO_SDA */
- { GPIO_146, Function0, INPUT },
+ PAD_NF(GPIO_146, I2C0_SDA, PULL_NONE),
/* GPIO_147 - PCH_I2C_H1_TPM_SCL */
- { GPIO_147, Function0, INPUT },
+ PAD_NF(GPIO_147, I2C1_SCL, PULL_NONE),
/* GPIO_148 - PCH_I2C_H1_TPM_SDA */
- { GPIO_148, Function0, INPUT },
+ PAD_NF(GPIO_148, I2C1_SDA, PULL_NONE),
};
const static struct soc_amd_stoneyridge_gpio gpio_set_stage_ram[] = {
/* GPIO_2 - WLAN_PCIE_WAKE_3V3_ODL */
- { GPIO_2, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_2, WAKE_L, PULL_UP),
/* GPIO_10 - SLP_S0_L (currently not used) */
- { GPIO_10, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_10, S0A3_GPIO, PULL_UP),
/* GPIO_12 - Unused (TP126) */
- { GPIO_12, Function2, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_12, PULL_UP),
/* GPIO_13 - APU_PEN_PDCT_ODL (currently not used) */
- { GPIO_13, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_13, PULL_UP),
/* GPIO_16 - USB_C0_OC_L */
- { GPIO_16, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_16, USB_OC0_L, PULL_UP),
/* GPIO_17 - USB_C1_OC_L */
- { GPIO_17, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_17, USB_OC1_L, PULL_UP),
/* GPIO_18 - USB_A0_OC_ODL */
- { GPIO_18, Function0, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_18, USB_OC2_L, PULL_UP),
/* GPIO_67 - PEN_RESET */
- { GPIO_67, Function0, OUTPUT_L },
+ PAD_GPO(GPIO_67, LOW),
/* GPIO_75 - Unused (strap) (R139/R130) */
- { GPIO_75, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_75, PULL_UP),
/* GPIO_76 - EN_PP3300_TOUCHSCREEN */
- { GPIO_76, Function0, OUTPUT_H },
+ PAD_GPO(GPIO_76, HIGH),
/* GPIO_86 - Unused (TP109) */
- { GPIO_86, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_86, PULL_UP),
/* GPIO_90 - EN_PP3300_CAMERA */
- { GPIO_90, Function0, OUTPUT_H },
+ PAD_GPO(GPIO_90, HIGH),
/* GPIO_91 - EN_PP3300_TRACKPAD */
- { GPIO_91, Function1, OUTPUT_H },
+ PAD_GPO(GPIO_91, HIGH),
/* GPIO_102 - EN_SD_SOCKET_PWR */
- { GPIO_102, Function0, FCH_GPIO_PULL_DOWN_ENABLE | INPUT },
+ PAD_NF(GPIO_102, SD0_PWR_CTRL, PULL_DOWN),
/* GPIO_113 - APU_I2C_SCL2 (Pen & Trackpad) */
- { GPIO_113, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_113, I2C2_SCL, PULL_UP),
/* GPIO_114 - APU_I2C_SDA2 (Pen & Trackpad) */
- { GPIO_114, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_NF(GPIO_114, I2C2_SDA, PULL_UP),
/* GPIO_115 - Unused (TP127) */
- { GPIO_115, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_115, PULL_UP),
/* GPIO_130 - Unused (TP55) */
- { GPIO_130, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_130, PULL_UP),
/* GPIO_135 - Unused (TP128) */
- { GPIO_135, Function1, FCH_GPIO_PULL_UP_ENABLE | INPUT },
+ PAD_GPI(GPIO_135, PULL_UP),
};
const __attribute__((weak))