summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJacob Garber <jgarber1@ualberta.ca>2019-05-15 09:57:49 -0600
committerStefan Reinauer <stefan.reinauer@coreboot.org>2019-05-16 17:45:07 +0000
commit2e8188aa13b84f607fd3a1e95fb7b63b26ff1d89 (patch)
tree93c73cb6974081a170887dfcceaf2026135f51b0
parentce2c1cb742b17623978f3d9a9e414552189bc819 (diff)
downloadcoreboot-2e8188aa13b84f607fd3a1e95fb7b63b26ff1d89.tar.xz
Documentation/lessons: Tidy up lesson 2
- The link to create an account is now "Sign in" and not "Register" - Use monospace formatting for terminal commands and file names - Properly escape less-than and greater-than - Correct the 'make lint' example command - Reformat example commit messages - Add formatting for website links - Other whitespace fixes Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Change-Id: I9931bef8c30387d1c08b59973d6de9b5c0419814 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
-rw-r--r--Documentation/lessons/lesson2.md96
1 files changed, 52 insertions, 44 deletions
diff --git a/Documentation/lessons/lesson2.md b/Documentation/lessons/lesson2.md
index 626e76e74a..ae70c70cbc 100644
--- a/Documentation/lessons/lesson2.md
+++ b/Documentation/lessons/lesson2.md
@@ -5,10 +5,10 @@
If you already have an account, skip to Part 2.
Otherwise, go to <https://review.coreboot.org> in your preferred web browser.
-Select **Register** in the upper right corner.
+Select **Sign in** in the upper right corner.
Select the appropriate sign-in. For example, if you have a Google account,
-select **Google OAuth2** (gerrit-oauth-provider plugin)".**Note:** Your
+select **Google OAuth2** (gerrit-oauth-provider plugin). **Note:** Your
username for the account will be the username of the account you used to
sign-in with. (ex. your Google username).
@@ -17,7 +17,7 @@ sign-in with. (ex. your Google username).
If you prefer to use an HTTP password instead, skip to Part 2b.
For the most up-to-date instructions on how to set up SSH keys with Gerrit go to
-<https://gerrit-documentation.storage.googleapis.com/Documentation/2.14.2/user-upload.html#configure_ssh)>
+<https://gerrit-documentation.storage.googleapis.com/Documentation/2.14.2/user-upload.html#configure_ssh>
and follow the instructions there. Then, skip to Part 3.
Additionally, that section of the Web site provides explanation on starting
@@ -35,13 +35,13 @@ doing so could overwrite an existing key.
In the upper right corner, select your name and click on **Settings**.
Select **SSH Public Keys** on the left-hand side.
-In a terminal, run "ssh-keygen" and confirm the default path ".ssh/id_rsa".
+In a terminal, run `ssh-keygen` and confirm the default path `.ssh/id_rsa`.
Make a passphrase -- remember this phrase. It will be needed whenever you use
this RSA Public Key. **Note:** You might want to use a short password, or
forego the password altogether as you will be using it very often.
-Open "id_rsa.pub", copy all contents and paste into the textbox under
+Open `id_rsa.pub`, copy all contents and paste into the textbox under
"Add SSH Public Key" in the https://review.coreboot.org webpage.
## Part 2b: Setting up an HTTP Password
@@ -51,7 +51,7 @@ after you select your name and click on **Settings** on the left-hand side, rath
than selecting **SSH Public Keys**, select **HTTP Password**.
Click **Generate Password**. This should fill the "Password" box with a password. Copy
-the password, and add the following to your $HOME/.netrc file:
+the password, and add the following to your `$HOME/.netrc` file:
machine review.coreboot.org login YourUserNameHere password YourPasswordHere
@@ -61,7 +61,7 @@ just generated.
## Part 3: Clone coreboot and configure it for submitting patches
On Gerrit, click on the **Browse** tab in the upper left corner and select
-**Repositories**. From the listing, select the "coreboot" repo. You may have
+**Repositories**. From the listing, select the "coreboot" repo. You may have
to click the next page arrow at the bottom a few times to find it.
If you are using SSH keys, select **ssh** from the tabs under "Project
@@ -73,7 +73,7 @@ set. Click the profile picture at the top right and select **User Settings**,
then set your username in the **Profile** section.
If you are using HTTP, instead, select **http** from the tabs under "Project coreboot"
-and run the command that appears
+and run the command that appears.
Now is a good time to configure your global git identity, if you haven't
already.
@@ -91,13 +91,13 @@ and other configurations.
An easy first commit to make is fixing existing checkpatch errors and warnings
in the source files. To see errors that are already present, build the files in
-the repository by running 'make lint' in the coreboot directory. Alternatively,
-if you want to run 'make lint' on a specific directory, run:
+the repository by running `make lint` in the coreboot directory. Alternatively,
+if you want to run `make lint` on a specific directory, run:
- for file in $(git ls-files | grep src/amd/quadcore); do \
+ for file in $(git ls-files | grep <filepath>); do \
util/lint/checkpatch.pl --file $file --terse; done
-where <filepath> is the filepath of the directory (ex. src/cpu/amd/car).
+where `filepath` is the filepath of the directory (ex. `src/cpu/amd/car`).
Any changes made to files under the src directory are made locally,
and can be submitted for review.
@@ -120,7 +120,7 @@ To commit the change, run
git commit -s
**Note:** The -s adds a signed-off-by line by the committer. Your commit should be
-signed off with your name and email (i.e. **Your Name** **<Your Email>**, based on
+signed off with your name and email (i.e. **Your Name** **\<Your Email\>**, based on
what you set with git config earlier).
Running git commit first checks for any errors and warnings using lint. If
@@ -134,65 +134,73 @@ The first line of your commit message is your commit summary. This is a brief
one-line description of what you changed in the files using the template
below:
-`<filepath>: Short description`
-*ex. cpu/amd/pi/00630F01: Fix checkpatch warnings and errors*
+ <filepath>: Short description
+
+For example,
+
+ cpu/amd/pi/00630F01: Fix checkpatch warnings and errors
**Note:** It is good practice to use present tense in your descriptions
and do not punctuate your summary.
Then hit Enter. The next paragraph should be a more in-depth explanation of the
changes you've made to the files. Again, it is good practice to use present
-tense.
-*ex. Fix space prohibited between function name and open parenthesis,
-line over 80 characters, unnecessary braces for single statement blocks,
-space required before open brace errors and warnings.*
+tense. Ex.
+
+ Fix space prohibited between function name and open parenthesis,
+ line over 80 characters, unnecessary braces for single statement blocks,
+ space required before open brace errors and warnings.
When you have finished writing your commit message, save and exit the text
editor. You have finished committing your change. If, after submitting your
-commit, you wish to make changes to it, running "git commit --amend" allows
+commit, you wish to make changes to it, running `git commit --amend` allows
you to take back your commit and amend it.
-When you are done with your commit, run 'git push' to push your commit to
+When you are done with your commit, run `git push` to push your commit to
coreboot.org. **Note:** To submit as a draft, use
-'git push origin HEAD:refs/drafts/master' Submitting as a draft means that
+`git push origin HEAD:refs/drafts/master`. Submitting as a draft means that
your commit will be on coreboot.org, but is only visible to those you add
as reviewers.
This has been a quick primer on how to submit a change to Gerrit for review
-using git. You may wish to review the [Gerrit code review workflow
+using git. You may wish to review the [Gerrit code review workflow
documentation](https://gerrit-review.googlesource.com/Documentation/intro-user.html#code-review),
especially if you plan to work on multiple changes at the same time.
## Part 4b: Using git cola to stage and submit a commit
If git cola is not installed on your machine, see
-https://git-cola.github.io/downloads.html for download instructions.
+<https://git-cola.github.io/downloads.html> for download instructions.
-After making some edits to src files, rather than run "git add," run
-'git cola' from the command line. You should see all of the files
+After making some edits to src files, rather than run `git add`, run
+`git cola` from the command line. You should see all of the files
edited under "Modified".
In the textbox labeled "Commit summary" provide a brief one-line
description of what you changed in the files according to the template
below:
-`<filepath>: Short description`
-*ex. cpu/amd/pi/00630F01: Fix checkpatch warnings and errors*
+ <filepath>: Short description
+
+For example,
+
+ cpu/amd/pi/00630F01: Fix checkpatch warnings and errors
**Note:** It is good practice to use present tense in your descriptions
and do not punctuate your short description.
In the larger text box labeled 'Extended description...' provide a more
in-depth explanation of the changes you've made to the files. Again, it
-is good practice to use present tense.
-*ex. Fix space prohibited between function name and open parenthesis,
-line over 80 characters, unnecessary braces for single statement blocks,
-space required before open brace errors and warnings.*
+is good practice to use present tense. Ex.
+
+ Fix space prohibited between function name and open parenthesis,
+ line over 80 characters, unnecessary braces for single statement blocks,
+ space required before open brace errors and warnings.
Then press Enter two times to move the cursor to below your description.
To the left of the text boxes, there is an icon with an downward arrow.
Press the arrow and select "Sign Off." Make sure that you are signing off
-with your name and email (i.e. **Your Name** **<Your Email>**, based on what
+with your name and email (i.e. **Your Name** **\<Your Email\>**, based on what
you set with git config earlier).
Now, review each of your changes and mark either individual changes or
@@ -218,30 +226,30 @@ Note: Be sure to add any other changes that haven't already been
explained in the extended description.
When ready, select 'Commit' again. Once all errors have been satisfied
-and the commit succeeds, move to the command line and run 'git push'.
-**Note:** To submit as a draft, use 'git push origin HEAD:refs/drafts/master'
+and the commit succeeds, move to the command line and run `git push`.
+**Note:** To submit as a draft, use `git push origin HEAD:refs/drafts/master`.
Submitting as a draft means that your commit will be on coreboot.org, but is
only visible to those you add as reviewers.
## Part 5: Getting your commit reviewed
-Your commits can now be seen on review.coreboot.org if you select “Your”
-and click on “Changes” and can be reviewed by others. Your code will
+Your commits can now be seen on review.coreboot.org if you select "Your"
+and click on "Changes" and can be reviewed by others. Your code will
first be reviewed by build bot (Jenkins), which will either give you a warning
or verify a successful build; if so, your commit will receive a +1. Other
-users may also give your commit +1. For a commit to be merged, it needs
-to receive a +2.**Note:** A +1 and a +1 does not make a +2. Only certain users
+users may also give your commit +1. For a commit to be merged, it needs
+to receive a +2. **Note:** A +1 and a +1 does not make a +2. Only certain users
can give a +2.
## Part 6 (optional): bash-git-prompt
To help make it easier to understand the state of the git repository
-without running 'git status' or 'git log', there is a way to make the
+without running `git status` or `git log`, there is a way to make the
command line show the status of the repository at every point. This
is through bash-git-prompt.
Instructions for installing this are found at:
-https://github.com/magicmonty/bash-git-prompt
+<https://github.com/magicmonty/bash-git-prompt>.
**Note:** Feel free to search for different versions of git prompt,
as this one is specific to bash.
@@ -254,7 +262,7 @@ Run the following two commands in the command line:
**Note:** cd will change your directory to your home directory, so the
git clone command will be run there.
-Finally, open the ~/.bashrc file and append the following two lines:
+Finally, open the `~/.bashrc` file and append the following two lines:
GIT_PROMPT_ONLY_IN_REPO=1
source ~/.bash-git-prompt/gitprompt.sh
@@ -264,7 +272,7 @@ its state.
There also are additional configurations that you can change depending on your
preferences. If you wish to do so, look at the "All configs for .bashrc" section
-on https://github.com/magicmonty/bash-git-prompt. Listed in that section are
+on <https://github.com/magicmonty/bash-git-prompt>. Listed in that section are
various lines that you can copy, uncomment and add to your .bashrc file to
change the configurations. Example configurations include avoid fetching remote
status, and supporting versions of Git older than 1.7.10.
@@ -277,7 +285,7 @@ Suppose you would like to update a commit that has already been pushed to the
remote repository. If the commit you wish to update is the most recent
commit you have made, after making your desired changes, stage the files
(either using git add or in git cola), and amend the commit. To do so,
-if you are using the command line, run "git commit --amend." If you are
+if you are using the command line, run `git commit --amend`. If you are
using git cola, click on the gear icon located on the upper left side under
**Commit** and select **Amend Last Commit** in the drop down menu. Then, stage
the files you have changed, commit the changes, and run git push to push the