summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-03-08 17:00:37 -0800
committerRonald G. Minnich <rminnich@gmail.com>2013-03-21 23:11:25 +0100
commit467f31de92ca2ed9df1530270e9aabdd69fe8f88 (patch)
tree61092ad464c81d2f69cc66fc27e2db1ccb2df710
parent7922b468b51eea58c7238f11b21820b8d3747d6b (diff)
downloadcoreboot-467f31de92ca2ed9df1530270e9aabdd69fe8f88.tar.xz
haswell/lynxpoint: Use new PCH/PM helper functions
This makes use of the new functions from pmutil.c that take care of the differences between -H and -LP chipsets. It also adds support for the LynxPoint-LP GPE0 register block and the SMI/SCI routing differences. The FADT is updated to report the new 256 byte GPE0 block on wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address block so that part is zeroed to prevent IASL and the kernel from complaining about a mismatch. This was tested on WTM2. Unfortunately I am still unable to get an SCI delivered from the EC but I suspect that is due to a magic command needed to put the EC in ACPI mode. Instead I verified that all of the power management and GPIO registers were set to expected values. I also tested transitions into S3 and S5 from both the kernel and by pressing the power button at the developer mode screen and they all function as expected. Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2816 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
-rw-r--r--src/mainboard/intel/baskingridge/devicetree.cb2
-rw-r--r--src/mainboard/intel/wtm1/devicetree.cb9
-rw-r--r--src/mainboard/intel/wtm1/fadt.c14
-rw-r--r--src/mainboard/intel/wtm2/devicetree.cb9
-rw-r--r--src/mainboard/intel/wtm2/fadt.c14
-rw-r--r--src/northbridge/intel/haswell/acpi.c13
-rw-r--r--src/southbridge/intel/lynxpoint/chip.h9
-rw-r--r--src/southbridge/intel/lynxpoint/lpc.c21
-rw-r--r--src/southbridge/intel/lynxpoint/smi.c250
-rw-r--r--src/southbridge/intel/lynxpoint/smihandler.c279
10 files changed, 111 insertions, 509 deletions
diff --git a/src/mainboard/intel/baskingridge/devicetree.cb b/src/mainboard/intel/baskingridge/devicetree.cb
index c74767a74f..fa3f3e7773 100644
--- a/src/mainboard/intel/baskingridge/devicetree.cb
+++ b/src/mainboard/intel/baskingridge/devicetree.cb
@@ -48,7 +48,7 @@ chip northbridge/intel/haswell
register "gpi1_routing" = "1"
register "gpi14_routing" = "2"
register "alt_gp_smi_en" = "0x0000"
- register "gpe0_en" = "0x4000"
+ register "gpe0_en_1" = "0x4000"
register "ide_legacy_combined" = "0x0"
register "sata_ahci" = "0x1"
diff --git a/src/mainboard/intel/wtm1/devicetree.cb b/src/mainboard/intel/wtm1/devicetree.cb
index db7c9988c7..be4fe51b41 100644
--- a/src/mainboard/intel/wtm1/devicetree.cb
+++ b/src/mainboard/intel/wtm1/devicetree.cb
@@ -41,12 +41,11 @@ chip northbridge/intel/haswell
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x80"
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0000"
- register "gpe0_en" = "0x0000"
+ register "gpe0_en_1" = "0x00000000"
+ register "gpe0_en_2" = "0x00000000"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
register "ide_legacy_combined" = "0x0"
register "sata_ahci" = "0x1"
diff --git a/src/mainboard/intel/wtm1/fadt.c b/src/mainboard/intel/wtm1/fadt.c
index 510b765e96..7afbbfa698 100644
--- a/src/mainboard/intel/wtm1/fadt.c
+++ b/src/mainboard/intel/wtm1/fadt.c
@@ -21,12 +21,12 @@
#include <device/pci.h>
#include <arch/acpi.h>
#include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/pch.h>
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
{
acpi_header_t *header = &(fadt->header);
- u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)),
- 0x40) & 0xfffe;
+ u16 pmbase = get_pmbase();
memset((void *) fadt, 0, sizeof(acpi_fadt_t));
memcpy(header->signature, "FACP", 4);
@@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm1b_cnt_blk = 0x0;
fadt->pm2_cnt_blk = pmbase + 0x50;
fadt->pm_tmr_blk = pmbase + 0x8;
- fadt->gpe0_blk = pmbase + 0x20;
+ fadt->gpe0_blk = pmbase + 0x80;
fadt->gpe1_blk = 0;
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm2_cnt_len = 1;
fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 16;
+ fadt->gpe0_blk_len = 32;
fadt->gpe1_blk_len = 0;
fadt->gpe1_base = 0;
fadt->cst_cnt = 0;
@@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
fadt->x_pm_tmr_blk.addrh = 0x0;
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.space_id = 0;
+ fadt->x_gpe0_blk.bit_width = 0;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pmbase + 0x20;
+ fadt->x_gpe0_blk.addrl = 0;
fadt->x_gpe0_blk.addrh = 0x0;
fadt->x_gpe1_blk.space_id = 1;
diff --git a/src/mainboard/intel/wtm2/devicetree.cb b/src/mainboard/intel/wtm2/devicetree.cb
index db7c9988c7..80c86273d8 100644
--- a/src/mainboard/intel/wtm2/devicetree.cb
+++ b/src/mainboard/intel/wtm2/devicetree.cb
@@ -41,12 +41,11 @@ chip northbridge/intel/haswell
register "pirqg_routing" = "0x80"
register "pirqh_routing" = "0x80"
- # GPI routing
- # 0 No effect (default)
- # 1 SMI# (if corresponding ALT_GPI_SMI_EN bit is also set)
- # 2 SCI (if corresponding GPIO_EN bit is also set)
register "alt_gp_smi_en" = "0x0000"
- register "gpe0_en" = "0x0000"
+ register "gpe0_en_1" = "0x00000400"
+ register "gpe0_en_2" = "0x00000000"
+ register "gpe0_en_3" = "0x00000000"
+ register "gpe0_en_4" = "0x00000000"
register "ide_legacy_combined" = "0x0"
register "sata_ahci" = "0x1"
diff --git a/src/mainboard/intel/wtm2/fadt.c b/src/mainboard/intel/wtm2/fadt.c
index 510b765e96..7afbbfa698 100644
--- a/src/mainboard/intel/wtm2/fadt.c
+++ b/src/mainboard/intel/wtm2/fadt.c
@@ -21,12 +21,12 @@
#include <device/pci.h>
#include <arch/acpi.h>
#include <cpu/x86/smm.h>
+#include <southbridge/intel/lynxpoint/pch.h>
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
{
acpi_header_t *header = &(fadt->header);
- u16 pmbase = pci_read_config16(dev_find_slot(0, PCI_DEVFN(0x1f,0)),
- 0x40) & 0xfffe;
+ u16 pmbase = get_pmbase();
memset((void *) fadt, 0, sizeof(acpi_fadt_t));
memcpy(header->signature, "FACP", 4);
@@ -55,14 +55,14 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->pm1b_cnt_blk = 0x0;
fadt->pm2_cnt_blk = pmbase + 0x50;
fadt->pm_tmr_blk = pmbase + 0x8;
- fadt->gpe0_blk = pmbase + 0x20;
+ fadt->gpe0_blk = pmbase + 0x80;
fadt->gpe1_blk = 0;
fadt->pm1_evt_len = 4;
fadt->pm1_cnt_len = 2;
fadt->pm2_cnt_len = 1;
fadt->pm_tmr_len = 4;
- fadt->gpe0_blk_len = 16;
+ fadt->gpe0_blk_len = 32;
fadt->gpe1_blk_len = 0;
fadt->gpe1_base = 0;
fadt->cst_cnt = 0;
@@ -137,11 +137,11 @@ void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
fadt->x_pm_tmr_blk.addrl = pmbase + 0x8;
fadt->x_pm_tmr_blk.addrh = 0x0;
- fadt->x_gpe0_blk.space_id = 1;
- fadt->x_gpe0_blk.bit_width = 64;
+ fadt->x_gpe0_blk.space_id = 0;
+ fadt->x_gpe0_blk.bit_width = 0;
fadt->x_gpe0_blk.bit_offset = 0;
fadt->x_gpe0_blk.resv = 0;
- fadt->x_gpe0_blk.addrl = pmbase + 0x20;
+ fadt->x_gpe0_blk.addrl = 0;
fadt->x_gpe0_blk.addrh = 0x0;
fadt->x_gpe1_blk.space_id = 1;
diff --git a/src/northbridge/intel/haswell/acpi.c b/src/northbridge/intel/haswell/acpi.c
index e4d86be27f..81da086e01 100644
--- a/src/northbridge/intel/haswell/acpi.c
+++ b/src/northbridge/intel/haswell/acpi.c
@@ -182,17 +182,12 @@ int init_igd_opregion(igd_opregion_t *opregion)
pci_write_config16(igd, SWSCI, reg16);
/* clear dmisci status */
- reg16 = inw(DEFAULT_PMBASE + TCO1_STS);
+ reg16 = inw(get_pmbase() + TCO1_STS);
reg16 |= DMISCI_STS; // reference code does an &=
- outw(DEFAULT_PMBASE + TCO1_STS, reg16);
+ outw(get_pmbase() + TCO1_STS, reg16);
- /* clear acpi tco status */
- outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS);
-
- /* enable acpi tco scis */
- reg16 = inw(DEFAULT_PMBASE + GPE0_EN);
- reg16 |= TCOSCI_EN;
- outw(DEFAULT_PMBASE + GPE0_EN, reg16);
+ /* clear and enable ACPI TCO SCI */
+ enable_tco_sci();
return 0;
}
diff --git a/src/southbridge/intel/lynxpoint/chip.h b/src/southbridge/intel/lynxpoint/chip.h
index ffeb977534..95bd087bdb 100644
--- a/src/southbridge/intel/lynxpoint/chip.h
+++ b/src/southbridge/intel/lynxpoint/chip.h
@@ -35,7 +35,7 @@ struct southbridge_intel_lynxpoint_config {
uint8_t pirqh_routing;
/**
- * GPI Routing configuration
+ * GPI Routing configuration for LynxPoint-H
*
* Only the lower two bits have a meaning:
* 00: No effect
@@ -60,8 +60,11 @@ struct southbridge_intel_lynxpoint_config {
uint8_t gpi14_routing;
uint8_t gpi15_routing;
- uint32_t gpe0_en;
- uint16_t alt_gp_smi_en;
+ uint32_t gpe0_en_1;
+ uint32_t gpe0_en_2;
+ uint32_t gpe0_en_3;
+ uint32_t gpe0_en_4;
+ uint32_t alt_gp_smi_en;
/* IDE configuration */
uint32_t ide_legacy_combined;
diff --git a/src/southbridge/intel/lynxpoint/lpc.c b/src/southbridge/intel/lynxpoint/lpc.c
index 89d7350364..a943ca704b 100644
--- a/src/southbridge/intel/lynxpoint/lpc.c
+++ b/src/southbridge/intel/lynxpoint/lpc.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -184,12 +185,12 @@ static void pch_gpi_routing(device_t dev)
static void pch_power_options(device_t dev)
{
u8 reg8;
- u16 reg16, pmbase;
+ u16 reg16;
u32 reg32;
const char *state;
/* Get the chip configuration */
config_t *config = dev->chip_info;
-
+ u16 pmbase = get_pmbase();
int pwr_on=CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
int nmi_option;
@@ -257,13 +258,19 @@ static void pch_power_options(device_t dev)
reg16 &= ~(1 << 10); // Disable BIOS_PCI_EXP_EN for native PME
pci_write_config16(dev, GEN_PMCON_1, reg16);
- // Set the board's GPI routing.
- pch_gpi_routing(dev);
+ /*
+ * Set the board's GPI routing on LynxPoint-H.
+ * This is done as part of GPIO configuration on LynxPoint-LP.
+ */
+ if (pch_is_lp())
+ pch_gpi_routing(dev);
- pmbase = pci_read_config16(dev, 0x40) & 0xfffe;
+ /* GPE setup based on device tree configuration */
+ enable_all_gpe(config->gpe0_en_1, config->gpe0_en_2,
+ config->gpe0_en_3, config->gpe0_en_4);
- outl(config->gpe0_en, pmbase + GPE0_EN);
- outw(config->alt_gp_smi_en, pmbase + ALT_GP_SMI_EN);
+ /* SMI setup based on device tree configuration */
+ enable_alt_smi(config->alt_gp_smi_en);
/* Set up power management block and determine sleep mode */
reg32 = inl(pmbase + 0x04); // PM1_CNT
diff --git a/src/southbridge/intel/lynxpoint/smi.c b/src/southbridge/intel/lynxpoint/smi.c
index a3354b8409..176d400256 100644
--- a/src/southbridge/intel/lynxpoint/smi.c
+++ b/src/southbridge/intel/lynxpoint/smi.c
@@ -30,240 +30,34 @@
#include <string.h>
#include "pch.h"
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-static u16 pmbase = DEFAULT_PMBASE;
-
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_DEBUG, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_DEBUG, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_DEBUG, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_DEBUG, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_DEBUG, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_DEBUG, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_DEBUG, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_DEBUG, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_DEBUG, "TMROF ");
- printk(BIOS_DEBUG, "\n");
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + GPE0_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + GPE0_STS);
-
- return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- for (i=31; i<= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "EL_SCI/BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "HOT_PLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear ALT_GP_SMI_STS
- * @return ALT_GP_SMI_STS register
- */
-static u16 reset_alt_gp_smi_status(void)
-{
- u16 reg16;
-
- reg16 = inl(pmbase + ALT_GP_SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg16, pmbase + ALT_GP_SMI_STS);
-
- return reg16;
-}
-
-static void dump_alt_gp_smi_status(u16 alt_gp_smi_sts)
-{
- int i;
- printk(BIOS_DEBUG, "ALT_GP_SMI_STS: ");
- for (i=15; i<= 0; i--) {
- if (alt_gp_smi_sts & (1 << i)) printk(BIOS_DEBUG, "GPI%d ", (i-16));
- }
- printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-
-/**
- * @brief Set the EOS bit
- */
-static void smi_set_eos(void)
-{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
-}
-
void southbridge_smm_init(void)
{
u32 smi_en;
- u16 pm1_en;
- u32 gpe0_en;
#if CONFIG_ELOG
/* Log events from chipset before clearing */
pch_log_state();
#endif
printk(BIOS_DEBUG, "Initializing Southbridge SMI...");
+ printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", get_pmbase());
- pmbase = pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x1f, 0)),
- PMBASE) & 0xff80;
-
- printk(BIOS_SPEW, " ... pmbase = 0x%04x\n", pmbase);
-
- smi_en = inl(pmbase + SMI_EN);
+ smi_en = inl(get_pmbase() + SMI_EN);
if (smi_en & APMC_EN) {
printk(BIOS_INFO, "SMI# handler already enabled?\n");
return;
}
printk(BIOS_DEBUG, "\n");
- dump_smi_status(reset_smi_status());
- dump_pm1_status(reset_pm1_status());
- dump_gpe0_status(reset_gpe0_status());
- dump_alt_gp_smi_status(reset_alt_gp_smi_status());
- dump_tco_status(reset_tco_status());
- /* Disable GPE0 PME_B0 */
- gpe0_en = inl(pmbase + GPE0_EN);
- gpe0_en &= ~PME_B0_EN;
- outl(gpe0_en, pmbase + GPE0_EN);
+ /* Dump and clear status registers */
+ clear_smi_status();
+ clear_pm1_status();
+ clear_tco_status();
+ clear_gpe_status();
- pm1_en = 0;
- pm1_en |= PWRBTN_EN;
- pm1_en |= GBL_EN;
- outw(pm1_en, pmbase + PM1_EN);
+ /* Configure events */
+ enable_pm1(PWRBTN_EN | GBL_EN);
+ disable_gpe(PME_B0_EN);
/* Enable SMI generation:
* - on TCO events
@@ -273,23 +67,7 @@ void southbridge_smm_init(void)
* No SMIs:
* - on microcontroller writes (io 0x62/0x66)
*/
-
- smi_en = 0; /* reset SMI enables */
-
-#if 0
- smi_en |= LEGACY_USB2_EN | LEGACY_USB_EN;
-#endif
- smi_en |= TCO_EN;
- smi_en |= APMC_EN;
- smi_en |= SLP_SMI_EN;
-#if 0
- smi_en |= BIOS_EN;
-#endif
-
- /* The following need to be on for SMIs to happen */
- smi_en |= EOS | GBL_SMI_EN;
-
- outl(smi_en, pmbase + SMI_EN);
+ enable_smi(TCO_EN | APMC_EN | SLP_SMI_EN | GBL_SMI_EN | EOS);
}
void southbridge_trigger_smi(void)
@@ -315,13 +93,13 @@ void southbridge_trigger_smi(void)
void southbridge_clear_smi_status(void)
{
/* Clear SMI status */
- reset_smi_status();
+ clear_smi_status();
/* Clear PM1 status */
- reset_pm1_status();
+ clear_pm1_status();
/* Set EOS bit so other SMIs can occur. */
- smi_set_eos();
+ enable_smi(EOS);
}
void smm_setup_structures(void *gnvs, void *tcg, void *smi1)
diff --git a/src/southbridge/intel/lynxpoint/smihandler.c b/src/southbridge/intel/lynxpoint/smihandler.c
index 48dca2c8fd..49f7df8d52 100644
--- a/src/southbridge/intel/lynxpoint/smihandler.c
+++ b/src/southbridge/intel/lynxpoint/smihandler.c
@@ -2,6 +2,7 @@
* This file is part of the coreboot project.
*
* Copyright (C) 2008-2009 coresystems GmbH
+ * Copyright 2013 Google Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -33,14 +34,6 @@
#include "nvs.h"
-/* While we read PMBASE dynamically in case it changed, let's
- * initialize it with a sane value
- */
-static u16 pmbase = DEFAULT_PMBASE;
-u16 smm_get_pmbase(void)
-{
- return pmbase;
-}
static u8 smm_initialized = 0;
@@ -53,157 +46,6 @@ global_nvs_t *smm_get_gnvs(void)
return gnvs;
}
-/**
- * @brief read and clear PM1_STS
- * @return PM1_STS register
- */
-static u16 reset_pm1_status(void)
-{
- u16 reg16;
-
- reg16 = inw(pmbase + PM1_STS);
- /* set status bits are cleared by writing 1 to them */
- outw(reg16, pmbase + PM1_STS);
-
- return reg16;
-}
-
-static void dump_pm1_status(u16 pm1_sts)
-{
- printk(BIOS_SPEW, "PM1_STS: ");
- if (pm1_sts & (1 << 15)) printk(BIOS_SPEW, "WAK ");
- if (pm1_sts & (1 << 14)) printk(BIOS_SPEW, "PCIEXPWAK ");
- if (pm1_sts & (1 << 11)) printk(BIOS_SPEW, "PRBTNOR ");
- if (pm1_sts & (1 << 10)) printk(BIOS_SPEW, "RTC ");
- if (pm1_sts & (1 << 8)) printk(BIOS_SPEW, "PWRBTN ");
- if (pm1_sts & (1 << 5)) printk(BIOS_SPEW, "GBL ");
- if (pm1_sts & (1 << 4)) printk(BIOS_SPEW, "BM ");
- if (pm1_sts & (1 << 0)) printk(BIOS_SPEW, "TMROF ");
- printk(BIOS_SPEW, "\n");
- int reg16 = inw(pmbase + PM1_EN);
- printk(BIOS_SPEW, "PM1_EN: %x\n", reg16);
-}
-
-/**
- * @brief read and clear SMI_STS
- * @return SMI_STS register
- */
-static u32 reset_smi_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + SMI_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + SMI_STS);
-
- return reg32;
-}
-
-static void dump_smi_status(u32 smi_sts)
-{
- printk(BIOS_DEBUG, "SMI_STS: ");
- if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
- if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
- if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
- if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
- if (smi_sts & (1 << 17)) printk(BIOS_DEBUG, "LEGACY_USB2 ");
- if (smi_sts & (1 << 16)) printk(BIOS_DEBUG, "SMBUS_SMI ");
- if (smi_sts & (1 << 15)) printk(BIOS_DEBUG, "SERIRQ_SMI ");
- if (smi_sts & (1 << 14)) printk(BIOS_DEBUG, "PERIODIC ");
- if (smi_sts & (1 << 13)) printk(BIOS_DEBUG, "TCO ");
- if (smi_sts & (1 << 12)) printk(BIOS_DEBUG, "DEVMON ");
- if (smi_sts & (1 << 11)) printk(BIOS_DEBUG, "MCSMI ");
- if (smi_sts & (1 << 10)) printk(BIOS_DEBUG, "GPI ");
- if (smi_sts & (1 << 9)) printk(BIOS_DEBUG, "GPE0 ");
- if (smi_sts & (1 << 8)) printk(BIOS_DEBUG, "PM1 ");
- if (smi_sts & (1 << 6)) printk(BIOS_DEBUG, "SWSMI_TMR ");
- if (smi_sts & (1 << 5)) printk(BIOS_DEBUG, "APM ");
- if (smi_sts & (1 << 4)) printk(BIOS_DEBUG, "SLP_SMI ");
- if (smi_sts & (1 << 3)) printk(BIOS_DEBUG, "LEGACY_USB ");
- if (smi_sts & (1 << 2)) printk(BIOS_DEBUG, "BIOS ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear GPE0_STS
- * @return GPE0_STS register
- */
-static u32 reset_gpe0_status(void)
-{
- u32 reg32;
-
- reg32 = inl(pmbase + GPE0_STS);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32, pmbase + GPE0_STS);
-
- return reg32;
-}
-
-static void dump_gpe0_status(u32 gpe0_sts)
-{
- int i;
- printk(BIOS_DEBUG, "GPE0_STS: ");
- for (i=31; i<= 16; i--) {
- if (gpe0_sts & (1 << i)) printk(BIOS_DEBUG, "GPIO%d ", (i-16));
- }
- if (gpe0_sts & (1 << 14)) printk(BIOS_DEBUG, "USB4 ");
- if (gpe0_sts & (1 << 13)) printk(BIOS_DEBUG, "PME_B0 ");
- if (gpe0_sts & (1 << 12)) printk(BIOS_DEBUG, "USB3 ");
- if (gpe0_sts & (1 << 11)) printk(BIOS_DEBUG, "PME ");
- if (gpe0_sts & (1 << 10)) printk(BIOS_DEBUG, "BATLOW ");
- if (gpe0_sts & (1 << 9)) printk(BIOS_DEBUG, "PCI_EXP ");
- if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
- if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
- if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
- if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97 ");
- if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
- if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
- if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");
- if (gpe0_sts & (1 << 1)) printk(BIOS_DEBUG, "HOTPLUG ");
- if (gpe0_sts & (1 << 0)) printk(BIOS_DEBUG, "THRM ");
- printk(BIOS_DEBUG, "\n");
-}
-
-
-/**
- * @brief read and clear TCOx_STS
- * @return TCOx_STS registers
- */
-static u32 reset_tco_status(void)
-{
- u32 tcobase = pmbase + 0x60;
- u32 reg32;
-
- reg32 = inl(tcobase + 0x04);
- /* set status bits are cleared by writing 1 to them */
- outl(reg32 & ~(1<<18), tcobase + 0x04); // Don't clear BOOT_STS before SECOND_TO_STS
- if (reg32 & (1 << 18))
- outl(reg32 & (1<<18), tcobase + 0x04); // clear BOOT_STS
-
- return reg32;
-}
-
-
-static void dump_tco_status(u32 tco_sts)
-{
- printk(BIOS_DEBUG, "TCO_STS: ");
- if (tco_sts & (1 << 20)) printk(BIOS_DEBUG, "SMLINK_SLV ");
- if (tco_sts & (1 << 18)) printk(BIOS_DEBUG, "BOOT ");
- if (tco_sts & (1 << 17)) printk(BIOS_DEBUG, "SECOND_TO ");
- if (tco_sts & (1 << 16)) printk(BIOS_DEBUG, "INTRD_DET ");
- if (tco_sts & (1 << 12)) printk(BIOS_DEBUG, "DMISERR ");
- if (tco_sts & (1 << 10)) printk(BIOS_DEBUG, "DMISMI ");
- if (tco_sts & (1 << 9)) printk(BIOS_DEBUG, "DMISCI ");
- if (tco_sts & (1 << 8)) printk(BIOS_DEBUG, "BIOSWR ");
- if (tco_sts & (1 << 7)) printk(BIOS_DEBUG, "NEWCENTURY ");
- if (tco_sts & (1 << 3)) printk(BIOS_DEBUG, "TIMEOUT ");
- if (tco_sts & (1 << 2)) printk(BIOS_DEBUG, "TCO_INT ");
- if (tco_sts & (1 << 1)) printk(BIOS_DEBUG, "SW_TCO ");
- if (tco_sts & (1 << 0)) printk(BIOS_DEBUG, "NMI2SMI ");
- printk(BIOS_DEBUG, "\n");
-}
-
int southbridge_io_trap_handler(int smif)
{
switch (smif) {
@@ -226,11 +68,7 @@ int southbridge_io_trap_handler(int smif)
*/
void southbridge_smi_set_eos(void)
{
- u8 reg8;
-
- reg8 = inb(pmbase + SMI_EN);
- reg8 |= EOS;
- outb(reg8, pmbase + SMI_EN);
+ enable_smi(EOS);
}
static void busmaster_disable_on_bus(int bus)
@@ -274,6 +112,7 @@ static void southbridge_smi_sleep(void)
u32 reg32;
u8 slp_typ;
u8 s5pwr = CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL;
+ u16 pmbase = get_pmbase();
// save and recover RTC port values
u8 tmp70, tmp72;
@@ -284,9 +123,7 @@ static void southbridge_smi_sleep(void)
outb(tmp72, 0x72);
/* First, disable further SMIs */
- reg8 = inb(pmbase + SMI_EN);
- reg8 &= ~SLP_SMI_EN;
- outb(reg8, pmbase + SMI_EN);
+ disable_smi(SLP_SMI_EN);
/* Figure out SLP_TYP */
reg32 = inl(pmbase + PM1_CNT);
@@ -306,19 +143,26 @@ static void southbridge_smi_sleep(void)
*/
switch (slp_typ) {
- case 0: printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n"); break;
- case 1: printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n"); break;
- case 5:
+ case SLP_TYP_S0:
+ printk(BIOS_DEBUG, "SMI#: Entering S0 (On)\n");
+ break;
+ case SLP_TYP_S1:
+ printk(BIOS_DEBUG, "SMI#: Entering S1 (Assert STPCLK#)\n");
+ break;
+ case SLP_TYP_S3:
printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
/* Invalidate the cache before going to S3 */
wbinvd();
break;
- case 6: printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n"); break;
- case 7:
+ case SLP_TYP_S4:
+ printk(BIOS_DEBUG, "SMI#: Entering S4 (Suspend-To-Disk)\n");
+ break;
+ case SLP_TYP_S5:
printk(BIOS_DEBUG, "SMI#: Entering S5 (Soft Power off)\n");
- outl(0, pmbase + GPE0_EN);
+ /* Disable all GPE */
+ disable_all_gpe();
/* Always set the flag in case CMOS was changed on runtime. For
* "KEEP", switch to "OFF" - KEEP is software emulated
@@ -334,14 +178,16 @@ static void southbridge_smi_sleep(void)
/* also iterates over all bridges on bus 0 */
busmaster_disable_on_bus(0);
break;
- default: printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n"); break;
+ default:
+ printk(BIOS_DEBUG, "SMI#: ERROR: SLP_TYP reserved\n");
+ break;
}
/* Write back to the SLP register to cause the originally intended
* event again. We need to set BIT13 (SLP_EN) though to make the
* sleep happen.
*/
- outl(reg32 | SLP_EN, pmbase + PM1_CNT);
+ enable_pm1_control(SLP_EN);
/* Make sure to stop executing code here for S3/S4/S5 */
if (slp_typ > 1)
@@ -354,8 +200,7 @@ static void southbridge_smi_sleep(void)
reg32 = inl(pmbase + PM1_CNT);
if (reg32 & SCI_EN) {
/* The OS is not an ACPI OS, so we set the state to S0 */
- reg32 &= ~(SLP_EN | SLP_TYP);
- outl(reg32, pmbase + PM1_CNT);
+ disable_pm1_control(SLP_EN | SLP_TYP);
}
}
@@ -420,7 +265,6 @@ static void southbridge_smi_gsmi(void)
static void southbridge_smi_apmc(void)
{
- u32 pmctrl;
u8 reg8;
em64t101_smm_state_save_area_t *state;
@@ -443,20 +287,17 @@ static void southbridge_smi_apmc(void)
printk(BIOS_DEBUG, "P-state control\n");
break;
case APM_CNT_ACPI_DISABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl &= ~SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
+ disable_pm1_control(SCI_EN);
printk(BIOS_DEBUG, "SMI#: ACPI disabled.\n");
break;
case APM_CNT_ACPI_ENABLE:
- pmctrl = inl(pmbase + PM1_CNT);
- pmctrl |= SCI_EN;
- outl(pmctrl, pmbase + PM1_CNT);
+ enable_pm1_control(SCI_EN);
printk(BIOS_DEBUG, "SMI#: ACPI enabled.\n");
break;
case APM_CNT_GNVS_UPDATE:
if (smm_initialized) {
- printk(BIOS_DEBUG, "SMI#: SMM structures already initialized!\n");
+ printk(BIOS_DEBUG,
+ "SMI#: SMM structures already initialized!\n");
return;
}
state = smi_apmc_find_state_save(reg8);
@@ -479,53 +320,41 @@ static void southbridge_smi_apmc(void)
static void southbridge_smi_pm1(void)
{
- u16 pm1_sts;
-
- pm1_sts = reset_pm1_status();
- dump_pm1_status(pm1_sts);
+ u16 pm1_sts = clear_pm1_status();
/* While OSPM is not active, poweroff immediately
* on a power button event.
*/
if (pm1_sts & PWRBTN_STS) {
// power button pressed
- u32 reg32;
- reg32 = (7 << 10) | (1 << 13);
#if CONFIG_ELOG_GSMI
elog_add_event(ELOG_TYPE_POWER_BUTTON);
#endif
- outl(reg32, pmbase + PM1_CNT);
+ disable_pm1_control(-1UL);
+ enable_pm1_control(SLP_EN | (SLP_TYP_S5 << 10));
}
}
static void southbridge_smi_gpe0(void)
{
- u32 gpe0_sts;
-
- gpe0_sts = reset_gpe0_status();
- dump_gpe0_status(gpe0_sts);
+ clear_gpe_status();
}
static void southbridge_smi_gpi(void)
{
- u16 reg16;
- reg16 = inw(pmbase + ALT_GP_SMI_STS);
- outw(reg16, pmbase + ALT_GP_SMI_STS);
-
- reg16 &= inw(pmbase + ALT_GP_SMI_EN);
+ mainboard_smi_gpi(clear_alt_smi_status());
- mainboard_smi_gpi(reg16);
-
- outw(reg16, pmbase + ALT_GP_SMI_STS);
+ /* Clear again after mainboard handler */
+ clear_alt_smi_status();
}
static void southbridge_smi_mc(void)
{
u32 reg32;
- reg32 = inl(pmbase + SMI_EN);
+ reg32 = inl(get_pmbase() + SMI_EN);
- /* Are periodic SMIs enabled? */
+ /* Are microcontroller SMIs enabled? */
if ((reg32 & MCSMI_EN) == 0)
return;
@@ -536,9 +365,7 @@ static void southbridge_smi_mc(void)
static void southbridge_smi_tco(void)
{
- u32 tco_sts;
-
- tco_sts = reset_tco_status();
+ u32 tco_sts = clear_tco_status();
/* Any TCO event? */
if (!tco_sts)
@@ -561,13 +388,12 @@ static void southbridge_smi_tco(void)
* box.
*/
printk(BIOS_DEBUG, "Switching back to RO\n");
- pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc, (bios_cntl & ~1));
+ pci_write_config32(PCI_DEV(0, 0x1f, 0), 0xdc,
+ (bios_cntl & ~1));
} /* No else for now? */
} else if (tco_sts & (1 << 3)) { /* TIMEOUT */
/* Handle TCO timeout */
printk(BIOS_DEBUG, "TCO Timeout.\n");
- } else if (!tco_sts) {
- dump_tco_status(tco_sts);
}
}
@@ -575,7 +401,7 @@ static void southbridge_smi_periodic(void)
{
u32 reg32;
- reg32 = inl(pmbase + SMI_EN);
+ reg32 = inl(get_pmbase() + SMI_EN);
/* Are periodic SMIs enabled? */
if ((reg32 & PERIODIC_EN) == 0)
@@ -624,11 +450,14 @@ static void southbridge_smi_monitor(void)
// Fall through to debug
}
- printk(BIOS_DEBUG, " trapped io address = 0x%x\n", trap_cycle & 0xfffc);
- for (i=0; i < 4; i++) if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAPĀ = %d\n", i);
+ printk(BIOS_DEBUG, " trapped io address = 0x%x\n",
+ trap_cycle & 0xfffc);
+ for (i=0; i < 4; i++)
+ if(IOTRAP(i)) printk(BIOS_DEBUG, " TRAP = %d\n", i);
printk(BIOS_DEBUG, " AHBE = %x\n", (trap_cycle >> 16) & 0xf);
printk(BIOS_DEBUG, " MASK = 0x%08x\n", mask);
- printk(BIOS_DEBUG, " read/write: %s\n", (trap_cycle & (1 << 24)) ? "read" : "write");
+ printk(BIOS_DEBUG, " read/write: %s\n",
+ (trap_cycle & (1 << 24)) ? "read" : "write");
if (!(trap_cycle & (1 << 24))) {
/* Write Cycle */
@@ -683,16 +512,13 @@ static smi_handler_t southbridge_smi[32] = {
void southbridge_smi_handler(void)
{
- int i, dump = 0;
+ int i;
u32 smi_sts;
- /* Update global variable pmbase */
- pmbase = pci_read_config16(PCI_DEV(0, 0x1f, 0), 0x40) & 0xfffc;
-
/* We need to clear the SMI status registers, or we won't see what's
* happening in the following calls.
*/
- smi_sts = reset_smi_status();
+ smi_sts = clear_smi_status();
/* Call SMI sub handler for each of the status bits */
for (i = 0; i < 31; i++) {
@@ -700,15 +526,10 @@ void southbridge_smi_handler(void)
if (southbridge_smi[i]) {
southbridge_smi[i]();
} else {
- printk(BIOS_DEBUG, "SMI_STS[%d] occured, but no "
- "handler available.\n", i);
- dump = 1;
+ printk(BIOS_DEBUG,
+ "SMI_STS[%d] occured, but no "
+ "handler available.\n", i);
}
}
}
-
- if(dump) {
- dump_smi_status(smi_sts);
- }
-
}