summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Reinauer <stefan.reinauer@coreboot.org>2014-10-18 10:55:17 +0200
committerStefan Reinauer <stefan.reinauer@coreboot.org>2014-12-16 21:18:43 +0100
commit46c85d7dfbe6b789f24f724dee189d529c215c76 (patch)
treec7b1cc2cef98a05a0e2c93e76b420c6fae82e372
parentbfea6cc2e07865fe8ae49aacd6af390d83b3c6c7 (diff)
downloadcoreboot-46c85d7dfbe6b789f24f724dee189d529c215c76.tar.xz
Drop SC520 and related boards
There is no Cache As Ram for these boards, let's get rid of them. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: Ia70befc59708c360ad02ed7e3a49d3b0f95dc707 Reviewed-on: http://review.coreboot.org/7119 Reviewed-by: Marc Jones <marc.jones@se-eng.com> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
-rw-r--r--src/cpu/amd/Kconfig2
-rw-r--r--src/cpu/amd/Makefile.inc1
-rw-r--r--src/cpu/amd/sc520/Kconfig5
-rw-r--r--src/cpu/amd/sc520/Makefile.inc1
-rw-r--r--src/cpu/amd/sc520/raminit.c643
-rw-r--r--src/cpu/amd/sc520/sc520.c200
-rw-r--r--src/mainboard/Kconfig3
-rw-r--r--src/mainboard/digitallogic/Kconfig3
-rw-r--r--src/mainboard/digitallogic/msm586seg/Kconfig23
-rw-r--r--src/mainboard/digitallogic/msm586seg/board_info.txt2
-rw-r--r--src/mainboard/digitallogic/msm586seg/cmos.layout72
-rw-r--r--src/mainboard/digitallogic/msm586seg/devicetree.cb7
-rw-r--r--src/mainboard/digitallogic/msm586seg/irq_tables.c31
-rw-r--r--src/mainboard/digitallogic/msm586seg/mainboard.c133
-rw-r--r--src/mainboard/digitallogic/msm586seg/romstage.c239
-rw-r--r--src/mainboard/technologic/Kconfig17
-rw-r--r--src/mainboard/technologic/ts5300/Kconfig23
-rw-r--r--src/mainboard/technologic/ts5300/board_info.txt2
-rw-r--r--src/mainboard/technologic/ts5300/cmos.layout72
-rw-r--r--src/mainboard/technologic/ts5300/devicetree.cb6
-rw-r--r--src/mainboard/technologic/ts5300/irq_tables.c31
-rw-r--r--src/mainboard/technologic/ts5300/mainboard.c147
-rw-r--r--src/mainboard/technologic/ts5300/romstage.c168
23 files changed, 0 insertions, 1831 deletions
diff --git a/src/cpu/amd/Kconfig b/src/cpu/amd/Kconfig
index c98ec848bd..8286b2a85b 100644
--- a/src/cpu/amd/Kconfig
+++ b/src/cpu/amd/Kconfig
@@ -15,7 +15,5 @@ source src/cpu/amd/model_10xxx/Kconfig
source src/cpu/amd/geode_gx2/Kconfig
source src/cpu/amd/geode_lx/Kconfig
-source src/cpu/amd/sc520/Kconfig
-
source src/cpu/amd/agesa/Kconfig
source src/cpu/amd/pi/Kconfig
diff --git a/src/cpu/amd/Makefile.inc b/src/cpu/amd/Makefile.inc
index 3f39c94fc8..a73e25ff19 100644
--- a/src/cpu/amd/Makefile.inc
+++ b/src/cpu/amd/Makefile.inc
@@ -10,7 +10,6 @@ subdirs-$(CONFIG_CPU_AMD_SOCKET_ASB2) += socket_ASB2
subdirs-$(CONFIG_CPU_AMD_SOCKET_C32_NON_AGESA) += socket_C32
subdirs-$(CONFIG_CPU_AMD_GEODE_GX2) += geode_gx2
subdirs-$(CONFIG_CPU_AMD_GEODE_LX) += geode_lx
-subdirs-$(CONFIG_CPU_AMD_SC520) += sc520
subdirs-$(CONFIG_CPU_AMD_SOCKET_S1G1) += socket_S1G1
subdirs-$(CONFIG_CPU_AMD_AGESA) += agesa
diff --git a/src/cpu/amd/sc520/Kconfig b/src/cpu/amd/sc520/Kconfig
deleted file mode 100644
index 7696b5cdcd..0000000000
--- a/src/cpu/amd/sc520/Kconfig
+++ /dev/null
@@ -1,5 +0,0 @@
-config CPU_AMD_SC520
- bool
- select ARCH_BOOTBLOCK_X86_32
- select ARCH_ROMSTAGE_X86_32
- select ARCH_RAMSTAGE_X86_32
diff --git a/src/cpu/amd/sc520/Makefile.inc b/src/cpu/amd/sc520/Makefile.inc
deleted file mode 100644
index 03f9e0f9bf..0000000000
--- a/src/cpu/amd/sc520/Makefile.inc
+++ /dev/null
@@ -1 +0,0 @@
-ramstage-y += sc520.c
diff --git a/src/cpu/amd/sc520/raminit.c b/src/cpu/amd/sc520/raminit.c
deleted file mode 100644
index f3f7071140..0000000000
--- a/src/cpu/amd/sc520/raminit.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/* this setupcpu function comes from: */
-/*==============================================================================*/
-/* FILE : start16.asm*/
-/**/
-/* DESC : A 16 bit mode assembly language startup program, intended for*/
-/* use with on Aspen SC520 platforms.*/
-/**/
-/* 11/16/2000 Added support for the NetSC520*/
-/* 12/28/2000 Modified to boot linux image*/
-/**/
-/* =============================================================================*/
-/* */
-/* Copyright 2000 Advanced Micro Devices, Inc. */
-/* */
-/* This software is the property of Advanced Micro Devices, Inc (AMD) which */
-/* specifically grants the user the right to modify, use and distribute this */
-/* software provided this COPYRIGHT NOTICE is not removed or altered. All */
-/* other rights are reserved by AMD. */
-/* */
-/* THE MATERIALS ARE PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY */
-/* OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF */
-/* THIRD-PARTY INTELLECTUAL PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE.*/
-/* IN NO EVENT SHALL AMD OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER*/
-/* (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS*/
-/* INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY*/
-/* TO USE THE MATERIALS, EVEN IF AMD HAS BEEN ADVISED OF THE POSSIBILITY OF*/
-/* SUCH DAMAGES. BECAUSE SOME JURSIDICTIONS PROHIBIT THE EXCLUSION OR*/
-/* LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE*/
-/* LIMITATION MAY NOT APPLY TO YOU.*/
-/**/
-/* AMD does not assume any responsibility for any errors that may appear in*/
-/* the Materials nor any responsibility to support or update the Materials.*/
-/* AMD retains the right to make changes to its test specifications at any*/
-/* time, without notice.*/
-/**/
-/* So that all may benefit from your experience, please report any problems */
-/* or suggestions about this software back to AMD. Please include your name, */
-/* company, telephone number, AMD product requiring support and question or */
-/* problem encountered. */
-/* */
-/* Advanced Micro Devices, Inc. Worldwide support and contact */
-/* Embedded Processor Division information available at: */
-/* Systems Engineering epd.support@amd.com*/
-/* 5204 E. Ben White Blvd. -or-*/
-/* Austin, TX 78741 http://www.amd.com/html/support/techsup.html*/
-/* ============================================================================*/
-
-
-#define OUTC(addr, val) *(unsigned char *)(addr) = (val)
-
-/* sadly, romcc can't quite handle what we want, so we do this ugly thing */
-#define drcctl (( volatile unsigned char *)0xfffef010)
-#define drcmctl (( volatile unsigned char *)0xfffef012)
-#define drccfg (( volatile unsigned char *)0xfffef014)
-
-#define drcbendadr (( volatile unsigned long *)0xfffef018)
-#define eccctl (( volatile unsigned char *)0xfffef020)
-#define dbctl (( volatile unsigned char *)0xfffef040)
-
-void setupsc520(void)
-{
- volatile unsigned char *cp;
- volatile unsigned short *sp;
- volatile unsigned long *edi;
-
- /* do this to see if MMCR will start acting right. we suspect
- * you have to do SOMETHING to get things going. I'm really
- * starting to hate this processor.
- */
-
- /* no, that did not help. I wonder what will?
- * outl(0x800df0cb, 0xfffc);
- */
-
- /* well, this is special! You have to do SHORT writes to the
- * locations, even though they are CHAR in size and CHAR aligned
- * and technically, a SHORT write will result in -- yoo ha! --
- * over writing the next location! Thanks to the u-boot guys
- * for a reference code I can use. with these short pointers,
- * it now reliably comes up after power cycle with printk. Ah yi
- * yi.
- */
-
- /* turn off the write buffer*/
- /* per the note above, make this a short? Let's try it. */
- sp = (unsigned short *)0xfffef040;
- *sp = 0;
-
- /* as per the book: */
- /* PAR register setup */
- /* set up the PAR registers as they are on the MSM586SEG */
- /* moved to romstage.c by Stepan, Ron says: */
- /* NOTE: move this to mainboard.c ASAP */
- setup_pars();
-
- /* CPCSF register */
- sp = (unsigned short *)0xfffefc24;
- *sp = 0xfe;
-
- /* ADDDECTL */
- sp = (unsigned short *)0xfffefc80;
- *sp = 0x10;
-
- /* byte writes in AMD assembly */
- /* we do short anyway, since u-boot does ... */
- /*set the GP CS offset*/
- sp = (unsigned short *)0xfffefc08;
- *sp = 0x00001;
- /*set the GP CS width*/
- sp = (unsigned short *)0xfffefc09;
- *sp = 0x00003;
-
- /* short writes in AMD assembly */
- /*set the GP CS width*/
- sp = (unsigned short *)0xfffefc0a;
- *sp = 0x00001;
- /*set the RD pulse width*/
- sp = (unsigned short *)0xfffefc0b;
- *sp = 0x00003;
- /*set the GP RD offset */
- sp = (unsigned short *)0xfffefc0c;
- *sp = 0x00001;
- /*set the GP WR pulse width*/
- sp = (unsigned short *)0xfffefc0d;
- *sp = 0x00003;
- /*set the GP WR offset*/
- sp = (unsigned short *)0xfffefc0e;
- *sp = 0x00001;
-
-
- /* set up the GP IO pins*/
- /*set the GPIO directionreg*/
- sp = (unsigned short *)0xfffefc2c;
- *sp = 0x00000;
- /*set the GPIO directionreg*/
- sp = (unsigned short *)0xfffefc2a;
- *sp = 0x00000;
- /*set the GPIO pin function 31-16 reg*/
- sp = (unsigned short *)0xfffefc22;
- *sp = 0x0FFFF;
- /*set the GPIO pin function 15-0 reg*/
- sp = (unsigned short *)0xfffefc20;
- *sp = 0x0FFFF;
-
-
- /* the 0x80 led should now be working*/
- post_code(0xaa);
-#if 0
- /* wtf are 680 leds ... *//* <-- WTF is this comment? */
- par = (unsigned long *) 0xfffef0c4;
- *par = 0x28000680;
- /* well? */
- post_code(0x55);
-#endif
-
- /* set the uart baud rate clocks to the normal 1.8432 MHz.*/
- /* enable interrupts here? Why not? */
- cp = (unsigned char *)0xfffefcc0;
- *cp = 4 | 3; /* uart 1 clock source */
- cp = (unsigned char *)0xfffefcc4;
- *cp = 4; /* uart 2 clock source */
-
-#if 0
-/*; set the interrupt mapping registers.*/
- cp = (unsigned char *)0x0fffefd20;
- *cp = 0x01;
-
- cp = (unsigned char *)0x0fffefd28;
- *cp = 0x0c;
-
- cp = (unsigned char *)0x0fffefd29;
- *cp = 0x0b;
-
- cp = (unsigned char *)0x0fffefd30;
- *cp = 0x07;
-
- cp = (unsigned char *)0x0fffefd43;
- *cp = 0x03;
-
- cp = (unsigned char *)0x0fffefd51;
- *cp = 0x02;
-#endif
-
-/* Stepan says: This needs to go to the msm586seg code */
-/* "enumerate" the PCI. Mainly set the interrupt bits on the PCnetFast. */
- outl(0x08000683c, 0xcf8);
- outl(0xc, 0xcfc); /* set the interrupt line */
-
-
- /* Set the SC520 PCI host bridge to target mode to
- * allow external bus mastering events
- */
- /* index the status command register on device 0*/
- outl(0x080000004, 0x0cf8);
- outl(0x2, 0xcfc); /*set the memory access enable bit*/
- OUTC(0x0fffef072, 1); /* enable req bits in SYSARBMENB */
-}
-
-
-/*
- *
- *
- */
-
-
-
-#define CACHELINESZ 0x00000010 /* size of our cache line (read buffer)*/
-
-#define COL11_ADR *(unsigned int *)0x0e001e00 /* 11 col addrs*/
-#define COL10_ADR *(unsigned int *)0x0e000e00 /* 10 col addrs*/
-#define COL09_ADR *(unsigned int *)0x0e000600 /* 9 col addrs*/
-#define COL08_ADR *(unsigned int *)0x0e000200 /* 8 col addrs*/
-
-#define ROW14_ADR *(unsigned int *)0x0f000000 /* 14 row addrs*/
-#define ROW13_ADR *(unsigned int *)0x07000000 /* 13 row addrs*/
-#define ROW12_ADR *(unsigned int *)0x03000000 /* 12 row addrs*/
-#define ROW11_ADR *(unsigned int *)0x01000000 /* 11 row addrs/also bank switch*/
-#define ROW10_ADR *(unsigned int *)0x00000000 /* 10 row addrs/also bank switch*/
-
-#define COL11_DATA 0x0b0b0b0b /* 11 col addrs*/
-#define COL10_DATA 0x0a0a0a0a /* 10 col data*/
-#define COL09_DATA 0x09090909 /* 9 col data*/
-#define COL08_DATA 0x08080808 /* 8 col data*/
-
-#define ROW14_DATA 0x3f3f3f3f /* 14 row data (MASK)*/
-#define ROW13_DATA 0x1f1f1f1f /* 13 row data (MASK)*/
-#define ROW12_DATA 0x0f0f0f0f /* 12 row data (MASK)*/
-#define ROW11_DATA 0x07070707 /* 11 row data/also bank switch (MASK)*/
-#define ROW10_DATA 0xaaaaaaaa /* 10 row data/also bank switch (MASK)*/
-
-void
-dummy_write(void){
- volatile unsigned short *ptr = (volatile unsigned short *)CACHELINESZ;
- *ptr = 0;
-}
-
-#include "drivers/pc80/udelay_io.c"
-
-static void dumpram(void){
- print_err("ctl "); print_err_hex8(*drcctl); print_err("\n");
- print_err("mctl "); print_err_hex8(*drcmctl); print_err("\n");
- print_err("cfg "); print_err_hex8(*drccfg); print_err("\n");
-
- print_err("bendadr0 "); print_err_hex8(*drcbendadr); print_err("\n");
- print_err("bendadr1 "); print_err_hex8(*drcbendadr); print_err("\n");
- print_err("bendadr2 "); print_err_hex8(*drcbendadr); print_err("\n");
- print_err("bendadr3"); print_err_hex8(*drcbendadr); print_err("\n");
-}
-
-/* there is a lot of silliness in the amd code, and it is
- * causing romcc real headaches, so we're going to be be a little
- * less silly.
- * so, the order of ops is:
- * for i in 3 to 0
- * see if bank is there.
- * if we can write a word, and read it back, to hell with paranoia
- * the bank is there. So write the magic byte, read it back, and
- * use that to get size, etc. Try to keep things very simple,
- * so people can actually follow the damned code.
- */
-
-/* cache is assumed to be disabled */
-int sizemem(void)
-{
-
- int rows,banks, cols, i, bank;
- unsigned char al;
- volatile unsigned long *lp = (volatile unsigned long *) CACHELINESZ;
- unsigned long l;
- /* initialize dram controller registers */
- /* disable write buffer/read-ahead buffer */
- *dbctl = 0;
- /* no ecc interrupts of any kind. */
- *eccctl = 0;
- /* Set SDRAM timing for slowest speed. */
- *drcmctl = 0x1e;
-
- /* setup dram register for all banks
- * with max cols and max banks
- * this is the oldest trick in the book. You are going to set up for max rows
- * and cols, then do a write, then see if the data is wrapped to low memory.
- * you can actually tell by which data gets to which low memory,
- * exactly how many rows and cols you have.
- */
- *drccfg=0xbbbb;
-
- /* setup loop to do 4 external banks starting with bank 3 */
- *drcbendadr=0x0ff000000;
- /* for now, set it up for one loop of bank 0. Just to get it to go at all. */
- *drcbendadr=0x0ff;
-
- /* issue a NOP to all DRAMs */
- /* Setup DRAM control register with Disable refresh,
- * disable write buffer Test Mode and NOP command select
- */
- *drcctl=0x01;
-
- /* dummy write for NOP to take effect */
- dummy_write();
- print_err("NOP\n");
- /* 100? 200? */
- udelay(100);
- print_err("after udelay\n");
-
- /* issue all banks precharge */
- *drcctl=0x02;
- print_err("set *drcctl to 2 \n");
- dummy_write();
- print_err("PRE\n");
-
- /* issue 2 auto refreshes to all banks */
- *drcctl=0x04;
- dummy_write();
- print_err("AUTO1\n");
- dummy_write();
- print_err("AUTO2\n");
-
- /* issue LOAD MODE REGISTER command */
- *drcctl=0x03;
- dummy_write();
- print_err("LOAD MODE REG\n");
-
- *drcctl=0x04;
- for (i=0; i<8; i++) /* refresh 8 times */{
- dummy_write();
- print_err("dummy write\n");
- }
- print_err("8 dummy writes\n");
-
- /* set control register to NORMAL mode */
- *drcctl=0x00;
- print_err("normal\n");
-
- print_err("HI done normal\n");
-
- print_err("sizemem\n");
- for(bank = 3; bank >= 0; bank--) {
- print_err("Try to assign to l\n");
- *lp = 0xdeadbeef;
- print_err("assigned l ... \n");
- if (*lp != 0xdeadbeef) {
- print_err(" no memory at bank ");
- // print_err_hex8(bank);
- // print_err(" value "); print_err_hex32(*lp);
- print_err("\n");
- // continue;
- }
- *drcctl = 2;
- dummy_write();
- *drccfg = *drccfg >> 4;
- l = *drcbendadr;
- l >>= 8;
- *drcbendadr = l;
- print_err("loop around\n");
- *drcctl = 0;
- dummy_write();
- }
-#if 0
- /* enable last bank and setup ending address
- * register for max ram in last bank
- */
- *drcbendadr=0x0ff000000;
-
-
-// dumpram();
-
- /* issue a NOP to all DRAMs */
- /* Setup DRAM control register with Disable refresh,
- * disable write buffer Test Mode and NOP command select
- */
- *drcctl=0x01;
-
- /* dummy write for NOP to take effect */
- dummy_write();
- print_err("NOP\n");
- /* 100? 200? */
- //udelay(100);
- print_err("after udelay\n");
-
- /* issue all banks precharge */
- *drcctl=0x02;
- print_err("set *drcctl to 2 \n");
- dummy_write();
- print_err("PRE\n");
-
- /* issue 2 auto refreshes to all banks */
- *drcctl=0x04;
- dummy_write();
- print_err("AUTO1\n");
- dummy_write();
- print_err("AUTO2\n");
-
- /* issue LOAD MODE REGISTER command */
- *drcctl=0x03;
- dummy_write();
- print_err("LOAD MODE REG\n");
-
- *drcctl=0x04;
- for (i=0; i<8; i++) /* refresh 8 times */{
- dummy_write();
- print_err("dummy write\n");
- }
- print_err("8 dummy writes\n");
-
- /* set control register to NORMAL mode */
- *drcctl=0x00;
- print_err("normal\n");
-
- print_err("HI done normal\n");
- bank = 3;
-
-
- /* this is really ugly, it is right from assembly code.
- * we need to clean it up later
- */
-
-start:
- /* write col 11 wrap adr */
- COL11_ADR=COL11_DATA;
- if(COL11_ADR!=COL11_DATA)
- goto bad_ram;
-
-print_err("11\n");
- /* write col 10 wrap adr */
- COL10_ADR=COL10_DATA;
- if(COL10_ADR!=COL10_DATA)
- goto bad_ram;
-print_err("10\n");
-
- /* write col 9 wrap adr */
- COL09_ADR=COL09_DATA;
- if(COL09_ADR!=COL09_DATA)
- goto bad_ram;
-print_err("9\n");
-
- /* write col 8 wrap adr */
- COL08_ADR=COL08_DATA;
- if(COL08_ADR!=COL08_DATA)
- goto bad_ram;
-print_err("8\n");
-
- /* write row 14 wrap adr */
- ROW14_ADR=ROW14_DATA;
- if(ROW14_ADR!=ROW14_DATA)
- goto bad_ram;
-print_err("14\n");
-
- /* write row 13 wrap adr */
- ROW13_ADR=ROW13_DATA;
- if(ROW13_ADR!=ROW13_DATA)
- goto bad_ram;
-print_err("13\n");
-
- /* write row 12 wrap adr */
- ROW12_ADR=ROW12_DATA;
- if(ROW12_ADR!=ROW12_DATA)
- goto bad_ram;
-print_err("12\n");
-
- /* write row 11 wrap adr */
- ROW11_ADR=ROW11_DATA;
- if(ROW11_ADR!=ROW11_DATA)
- goto bad_ram;
-print_err("11\n");
-
- /* write row 10 wrap adr */
- ROW10_ADR=ROW10_DATA;
- if(ROW10_ADR!=ROW10_DATA)
- goto bad_ram;
-print_err("10\n");
-
-/*
- * read data @ row 12 wrap adr to determine # banks,
- * and read data @ row 14 wrap adr to determine # rows.
- * if data @ row 12 wrap adr is not AA, 11 or 12 we have bad RAM.
- * if data @ row 12 wrap == AA, we only have 2 banks, NOT 4
- * if data @ row 12 wrap == 11 or 12, we have 4 banks
- */
-
- banks=2;
- if (ROW12_ADR != ROW10_DATA) {
- banks=4;
-print_err("4b\n");
- if(ROW12_ADR != ROW11_DATA) {
- if(ROW12_ADR != ROW12_DATA)
- goto bad_ram;
- }
- }
-
- /* validate row mask */
- rows=ROW14_ADR;
- if (rows<ROW11_DATA)
- goto bad_ram;
- if (rows>ROW14_DATA)
- goto bad_ram;
- /* verify all 4 bytes of dword same */
-/*
- if(rows&0xffff!=(rows>>16)&0xffff)
- goto bad_ram;
- if(rows&0xff!=(rows>>8)&0xff)
- goto bad_ram;
-*/
- /* now just get one of them */
- rows &= 0xff;
- print_err("rows"); print_err_hex32(rows); print_err("\n");
- /* validate column data */
- cols=COL11_ADR;
- if(cols<COL08_DATA)
- goto bad_ram;
- if (cols>COL11_DATA)
- goto bad_ram;
- /* verify all 4 bytes of dword same */
-/*
- if(cols&0xffff!=(cols>>16)&0xffff)
- goto bad_ram;
- if(cols&0xff!=(cols>>8)&0xff)
- goto bad_ram;
-*/
- print_err("cols"); print_err_hex32(cols); print_err("\n");
- cols -= COL08_DATA;
-
- /* cols now is in the range of 0 1 2 3 ...
- */
- i = cols&3;
- // i = cols + rows;
-
- /* wacky end addr calculation */
-/*
- al = 3;
- al -= (i & 0xff);k
- */
-
- /* what a fookin' mess this is */
- if(banks==4)
- i+=8; /* <-- i holds merged value */
- /* i now has the col width in bits 0-1 and the bank count (2 or 4)
- * in bit 3.
- * this is the format for the drccfg register
- */
-
- /* fix ending addr mask*/
- /*FIXME*/
- /* let's just go with this to start ... see if we can get ANYWHERE */
- /* need to get end addr. Need to do it with the bank in mind. */
-/*
- al = 3;
- al -= i&3;
- *drcbendaddr = rows >> al;
- print_err("computed ending_adr = "); print_err_hex8(ending_adr);
- print_err("\n");
-
-*/
-bad_reinit:
- /* issue all banks recharge */
- *drcctl=0x02;
- dummy_write();
-
- /* update ending address register */
-// *drcbendadr = ending_adr;
-
- /* update config register */
- *drccfg &= ~(0xff << bank*4);
- if (ending_adr)
- *drccfg = ((banks == 4 ? 8 : 0) | cols & 3)<< (bank*4);
-// dumpram();
- /* skip the rest for now */
- // bank = 0;
- // *drccfg=*drccfg&YYY|ZZZZ;
-
- if(bank!=0) {
- bank--;
-// drcbendaddr--;
- *drcbendaddr = 0xff000000;
- //*(&*drcbendadr+XXYYXX)=0xff;
- goto start;
- }
-
- /* set control register to NORMAL mode */
- *drcctl=0x18;
- dummy_write();
- return bank;
-
-bad_ram:
- print_info("bad ram!\n");
- /* you are here because the read-after-write failed,
- * in most cases because: no ram in that bank!
- * set badbank to 1 and go to reinit
- */
- ending_adr = 0;
- goto bad_reinit;
- while(1)
- print_err("DONE NEXTBANK\n");
-#endif
-}
-
-/* note: based on AMD code*/
-/* This code is known to work on the digital logic board and on the technologic
- * systems ts5300
- */
-int staticmem(void)
-{
- volatile unsigned long *zero = (unsigned long *) CACHELINESZ;
-
- /* set up 0x18 .. **/
- *drcbendadr = 0x88;
- *drcmctl = 0x1e;
- *drccfg = 0x9;
- /* nop mode */
- *drcctl = 0x1;
- /* do the dummy write */
- *zero = 0;
-
- /* precharge */
- *drcctl = 2;
- *zero = 0;
-
- /* two autorefreshes */
- *drcctl = 4;
- *zero = 0;
- print_debug("one zero out on refresh\n");
- *zero = 0;
- print_debug("two zero out on refresh\n");
-
- /* load mode register */
- *drcctl = 3;
- *zero = 0;
- print_debug("DONE the load mode reg\n");
-
- /* normal mode */
- *drcctl = 0x0;
- *zero = 0;
- print_debug("DONE one last write and then turn on refresh etc\n");
- *drcctl = 0x18;
- *zero = 0;
- print_debug("DONE the normal\n");
- *zero = 0xdeadbeef;
- if (*zero != 0xdeadbeef)
- print_debug("NO LUCK\n");
- else
- print_debug("did a store and load ...\n");
- //print_err_hex32(*zero);
- // print_err(" zero is now "); print_err_hex32(*zero); print_err("\n");
-}
diff --git a/src/cpu/amd/sc520/sc520.c b/src/cpu/amd/sc520/sc520.c
deleted file mode 100644
index 05215447c0..0000000000
--- a/src/cpu/amd/sc520/sc520.c
+++ /dev/null
@@ -1,200 +0,0 @@
-/*
- * This file needs a major cleanup. Too much #if 0 code
- */
-
-#include <console/console.h>
-#include <arch/io.h>
-#include <arch/ioapic.h>
-#include <stdint.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/hypertransport.h>
-#include <stdlib.h>
-#include <string.h>
-#include <delay.h>
-
-/*
- * set up basic things ...
- * PAR should NOT go here, as it might change with the mainboard.
- */
-static void cpu_init(device_t dev)
-{
- unsigned long *l = (unsigned long *) 0xfffef088;
- int i;
- for(i = 0; i < 16; i++, l++)
- printk(BIOS_ERR, "Par%d: 0x%lx\n", i, *l);
-
- printk(BIOS_SPEW, "SC520 random fixup ...\n");
-}
-
-
-/* Ollie says: make a northbridge/amd/sc520. Ron sez:
- * there is no real northbridge, keep it here in cpu.
- * Ron wins, he's writing the code.
- */
-static void sc520_enable_resources(struct device *dev) {
- unsigned char command;
-
- printk(BIOS_SPEW, "%s\n", __func__);
- command = pci_read_config8(dev, PCI_COMMAND);
- printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
- command |= PCI_COMMAND_MEMORY | PCI_COMMAND_PARITY | PCI_COMMAND_SERR;
- printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
- pci_write_config8(dev, PCI_COMMAND, command);
- command = pci_read_config8(dev, PCI_COMMAND);
- printk(BIOS_SPEW, "========>%s, command 0x%x\n", __func__, command);
-}
-
-static void sc520_read_resources(device_t dev)
-{
- struct resource* res;
-
- pci_dev_read_resources(dev);
-
- res = new_resource(dev, 1);
- res->base = 0x0UL;
- res->size = 0x400UL;
- res->limit = 0xffffUL;
- res->flags = IORESOURCE_IO | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-
- res = new_resource(dev, 3); /* IOAPIC */
- res->base = IO_APIC_ADDR;
- res->size = 0x00001000;
- res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
-}
-
-
-static struct device_operations cpu_operations = {
- .read_resources = sc520_read_resources,
- .set_resources = pci_dev_set_resources,
- .enable_resources = sc520_enable_resources,
- .init = cpu_init,
- .enable = 0,
- .ops_pci = 0,
-};
-
-static const struct pci_driver cpu_driver __pci_driver = {
- .ops = &cpu_operations,
- .vendor = PCI_VENDOR_ID_AMD,
- .device = 0x3000
-};
-
-static void pci_domain_set_resources(device_t dev)
-{
- device_t mc_dev;
- uint32_t pci_tolm;
- printk(BIOS_SPEW, "%s\n", __func__);
- pci_tolm = find_pci_tolm(dev->link_list);
- mc_dev = dev->link_list->children;
- if (mc_dev) {
- unsigned long tomk, tolmk;
- // unsigned char rambits;
- // int i;
- int idx;
-#if 0
- for(rambits = 0, i = 0; i < ARRAY_SIZE(ramregs); i++) {
- unsigned char reg;
- reg = pci_read_config8(mc_dev, ramregs[i]);
- /* these are ENDING addresses, not sizes.
- * if there is memory in this slot, then reg will be > rambits.
- * So we just take the max, that gives us total.
- * We take the highest one to cover for once and future coreboot
- * bugs. We warn about bugs.
- */
- if (reg > rambits)
- rambits = reg;
- if (reg < rambits)
- printk(BIOS_ERR, "ERROR! register 0x%x is not set!\n",
- ramregs[i]);
- }
- printk(BIOS_DEBUG, "I would set ram size to 0x%x Kbytes\n", (rambits)*8*1024);
- tomk = rambits*8*1024;
-#endif
- tomk = 32 * 1024;
- /* Compute the top of Low memory */
- tolmk = pci_tolm >> 10;
- if (tolmk >= tomk) {
- /* The PCI hole does does not overlap the memory.
- */
- tolmk = tomk;
- }
- /* Report the memory regions */
- idx = 10;
- ram_resource(dev, idx++, 0, tolmk);
- }
- assign_resources(dev->link_list);
-}
-
-#if 0
-void sc520_enable_resources(device_t dev) {
-
- printk(BIOS_SPEW, "%s\n", __func__);
- printk(BIOS_SPEW, "THIS IS FOR THE SC520 =============================\n");
-
-/*
- command = pci_read_config8(dev, PCI_COMMAND);
- printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
- command |= PCI_COMMAND_MEMORY;
- printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
- pci_write_config8(dev, PCI_COMMAND, command);
- command = pci_read_config8(dev, PCI_COMMAND);
- printk(BIOS_SPEW, "%s, command 0x%x\n", __func__, command);
- */
- enable_childrens_resources(dev);
- printk(BIOS_SPEW, "%s\n", __func__);
-}
-#endif
-
-static struct device_operations pci_domain_ops = {
- .read_resources = pci_domain_read_resources,
- .set_resources = pci_domain_set_resources,
- /*
- * If enable_resources is set to the generic enable_resources
- * function the whole thing will hang in an endless loop on
- * the ts5300. If this is really needed on another platform,
- * something is conceptually wrong.
- */
- .enable_resources = 0, //enable_resources,
- .init = 0,
- .scan_bus = pci_domain_scan_bus,
- .ops_pci_bus = pci_bus_default_ops,
-};
-
-#if 0
-static void cpu_bus_init(device_t dev)
-{
- printk(BIOS_SPEW, "cpu_bus_init\n");
-}
-
-static struct device_operations cpu_bus_ops = {
- .read_resources = DEVICE_NOOP,
- .set_resources = DEVICE_NOOP,
- .enable_resources = DEVICE_NOOP,
- .init = cpu_bus_init,
- .scan_bus = 0,
-};
-#endif
-
-static void enable_dev(struct device *dev)
-{
- printk(BIOS_SPEW, "%s\n", __func__);
- /* Set the operations if it is a special bus type */
- if (dev->path.type == DEVICE_PATH_DOMAIN) {
- dev->ops = &pci_domain_ops;
- }
-#if 0
- /* This is never hit as none of the sc520 boards have
- * an APIC cluster defined
- */
- else if (dev->path.type == DEVICE_PATH_CPU_CLUSTER) {
- dev->ops = &cpu_bus_ops;
- }
-#endif
-}
-
-
-struct chip_operations cpu_amd_sc520_ops = {
- CHIP_NAME("AMD Elan SC520 CPU")
- .enable_dev = enable_dev,
-};
diff --git a/src/mainboard/Kconfig b/src/mainboard/Kconfig
index 6ba6b718b1..610bfbb510 100644
--- a/src/mainboard/Kconfig
+++ b/src/mainboard/Kconfig
@@ -120,8 +120,6 @@ config VENDOR_SUPERMICRO
bool "Supermicro"
config VENDOR_TECHNEXION
bool "Technexion"
-config VENDOR_TECHNOLOGIC
- bool "Technologic"
config VENDOR_TI
bool "TI"
config VENDOR_THOMSON
@@ -197,7 +195,6 @@ source "src/mainboard/soyo/Kconfig"
source "src/mainboard/sunw/Kconfig"
source "src/mainboard/supermicro/Kconfig"
source "src/mainboard/technexion/Kconfig"
-source "src/mainboard/technologic/Kconfig"
source "src/mainboard/thomson/Kconfig"
source "src/mainboard/ti/Kconfig"
source "src/mainboard/traverse/Kconfig"
diff --git a/src/mainboard/digitallogic/Kconfig b/src/mainboard/digitallogic/Kconfig
index 9f490b0dc2..8aff47cd47 100644
--- a/src/mainboard/digitallogic/Kconfig
+++ b/src/mainboard/digitallogic/Kconfig
@@ -5,15 +5,12 @@ choice
config BOARD_DIGITALLOGIC_ADL855PC
bool "smartModule855"
-config BOARD_DIGITALLOGIC_MSM586SEG
- bool "MSM586SEG"
config BOARD_DIGITALLOGIC_MSM800SEV
bool "MSM800SEV"
endchoice
source "src/mainboard/digitallogic/adl855pc/Kconfig"
-source "src/mainboard/digitallogic/msm586seg/Kconfig"
source "src/mainboard/digitallogic/msm800sev/Kconfig"
config MAINBOARD_VENDOR
diff --git a/src/mainboard/digitallogic/msm586seg/Kconfig b/src/mainboard/digitallogic/msm586seg/Kconfig
deleted file mode 100644
index 4cd6f11430..0000000000
--- a/src/mainboard/digitallogic/msm586seg/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if BOARD_DIGITALLOGIC_MSM586SEG
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SC520
- select HAVE_PIRQ_TABLE
- select HAVE_OPTION_TABLE
- select BOARD_ROMSIZE_KB_512
- select ROMCC
-
-config MAINBOARD_DIR
- string
- default digitallogic/msm586seg
-
-config MAINBOARD_PART_NUMBER
- string
- default "MSM586SEG"
-
-config IRQ_SLOT_COUNT
- int
- default 2
-
-endif # BOARD_DIGITALLOGIC_MSM586SEG
diff --git a/src/mainboard/digitallogic/msm586seg/board_info.txt b/src/mainboard/digitallogic/msm586seg/board_info.txt
deleted file mode 100644
index 90fda6d555..0000000000
--- a/src/mainboard/digitallogic/msm586seg/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: half
-Board URL: http://www.digitallogic.ch/english/products/datasheets/ms_pc104_detail.asp?id=MSM586SEG
diff --git a/src/mainboard/digitallogic/msm586seg/cmos.layout b/src/mainboard/digitallogic/msm586seg/cmos.layout
deleted file mode 100644
index 9050c3db7a..0000000000
--- a/src/mainboard/digitallogic/msm586seg/cmos.layout
+++ /dev/null
@@ -1,72 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
diff --git a/src/mainboard/digitallogic/msm586seg/devicetree.cb b/src/mainboard/digitallogic/msm586seg/devicetree.cb
deleted file mode 100644
index e43ebff946..0000000000
--- a/src/mainboard/digitallogic/msm586seg/devicetree.cb
+++ /dev/null
@@ -1,7 +0,0 @@
-chip cpu/amd/sc520
- device domain 0 on
- device pci 0.0 on end
- device pci 12.0 on end # enet
- device pci 14.0 on end # 69000
- end
-end
diff --git a/src/mainboard/digitallogic/msm586seg/irq_tables.c b/src/mainboard/digitallogic/msm586seg/irq_tables.c
deleted file mode 100644
index 15dcddde12..0000000000
--- a/src/mainboard/digitallogic/msm586seg/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0, /* IRQs devoted exclusively to PCI usage */
- 0x8086, /* Vendor */
- 0x122e, /* Device */
- 0, /* Miniport data */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0},
- {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/digitallogic/msm586seg/mainboard.c b/src/mainboard/digitallogic/msm586seg/mainboard.c
deleted file mode 100644
index 0310176cb3..0000000000
--- a/src/mainboard/digitallogic/msm586seg/mainboard.c
+++ /dev/null
@@ -1,133 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <cpu/amd/sc520.h>
-
-
-static void irqdump(void)
-{
- volatile unsigned char *irq;
- void *mmcr;
- int i;
- int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
- 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
- 0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
- 0xd30, 0xd31, 0xd32, 0xd33,
- 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
- 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
- -1};
- mmcr = (void *) 0xfffef000;
-
- printk(BIOS_ERR, "mmcr is %p\n", mmcr);
- for(i = 0; irqlist[i] >= 0; i++) {
- irq = mmcr + irqlist[i];
- printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq);
- }
-
-}
-
-/* TODO: finish up mmcr struct in sc520.h, and;
- - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
-*/
-static void mainboard_enable(struct device *dev)
-{
- //volatile struct mmcrpic *pic = MMCRPIC;
- volatile struct mmcr *mmcr = MMCRDEFAULT;
-
- /* msm586seg has this register set to a weird value.
- * follow the board, not the manual!
- */
-
- /* currently, nothing in the device to use, so ignore it. */
- printk(BIOS_ERR, "digital logic msm586 seg ENTER %s\n", __func__);
-
-
- /* from fuctory bios */
- /* NOTE: the following interrupt settings made interrupts work
- * for hard drive, and serial, but not for ethernet
- */
- /* just do what they say and nobody gets hurt. */
- mmcr->pic.pcicr = 0 ; // M_GINT_MODE | M_S1_MODE | M_S2_MODE;
- /* all ints to level */
- mmcr->pic.mpicmode = 0;
- mmcr->pic.sl1picmode = 0;
- mmcr->pic.sl2picmode = 0x80;
-
- mmcr->pic.intpinpol = 0;
-
- mmcr->pic.pit0map = 1;
- mmcr->pic.uart1map = 0xc;
- mmcr->pic.uart2map = 0xb;
- mmcr->pic.rtcmap = 3;
- mmcr->pic.ferrmap = 8;
- mmcr->pic.gp0imap = 6;
- mmcr->pic.gp1imap = 2;
- mmcr->pic.gp2imap = 7;
- mmcr->pic.gp6imap = 0x15;
- mmcr->pic.gp7imap = 0x16;
- mmcr->pic.gp10imap = 0x9;
- mmcr->pic.gp9imap = 0x4;
-
- irqdump();
- printk(BIOS_ERR, "uart 1 ctl is 0x%x\n", *(unsigned char *) 0xfffefcc0);
-
- printk(BIOS_ERR, "0xc20 ctl is 0x%x\n", *(unsigned short *) 0xfffefc20);
- printk(BIOS_ERR, "0xc22 0x%x\n", *(unsigned short *) 0xfffefc22);
-
- /* The following block has NOT proven sufficient to get
- * the VGA hardware to talk to us
- */
- /* let's set some mmcr stuff per the BIOS settings */
- mmcr->dbctl.dbctl = 0x10;
- mmcr->sysarb.ctl = 6;
- mmcr->sysarb.menb = 0xf;
- mmcr->sysarb.prictl = 0xc0000f0f;
- /* this is bios setting, depends on sysarb above */
- mmcr->hostbridge.ctl = 0x108;
- printk(BIOS_ERR, "digital logic msm586 seg EXIT %s\n", __func__);
-
- /* pio */
- mmcr->pio.data31_16 = 0xffbf;
-
- /* pci stuff */
- mmcr->pic.pciintamap = 0xa;
-
- /* END block where vga hardware still will not talk to us */
- /* all we get from VGA I/O addresses are ffff etc.
- */
- mmcr->sysmap.adddecctl = 0x10;
-
- /* VGA now talks to us, so this adddecctl was the trick.
- * still no interrupts from enet.
- * Let's try fixing the piodata stuff, as there may be
- * some wire there not documented.
- */
- mmcr->pio.data31_16 = 0xffbf;
- /* also, our sl?picmode needs to match fuctory bios */
- mmcr->pic.sl1picmode = 0x80;
- mmcr->pic.sl2picmode = 0x0;
- /* and, finally, they do set gp5imap and we don't.
- */
- mmcr->pic.gp5imap = 0xd;
- /* remaining problem: almost certainly, the irq table is bogus
- * NO SHOCK as it came from fuctory bios.
- * but let's try these 4 changes for now and see what shakes.
- */
- /* still not interrupts. */
- /* their IRQ table is wrong. Just hardwire it */
- {
- unsigned char pciints[4] = {15, 15, 15, 15};
- pci_assign_irqs(0, 12, pciints);
- }
- /* the assigned failed but we just noticed -- there is no
- * dma mapping, and selftest on e100 requires that dma work
- */
- /* follow fuctory here */
- mmcr->dmacontrol.extchanmapa = 0x3210;
-}
-
-struct chip_operations mainboard_ops = {
- .enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/digitallogic/msm586seg/romstage.c b/src/mainboard/digitallogic/msm586seg/romstage.c
deleted file mode 100644
index 2cc0ab5864..0000000000
--- a/src/mainboard/digitallogic/msm586seg/romstage.c
+++ /dev/null
@@ -1,239 +0,0 @@
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include "cpu/x86/bist.h"
-
-void setup_pars(void)
-{
- volatile unsigned long *par;
- /* as per the book: */
- /* PAR register setup */
- /* set up the PAR registers as they are on the MSM586SEG */
- par = (unsigned long *) 0xfffef088;
-
- /* NOTE: move this to mainboard.c ASAP */
- *par++ = 0x607c00a0; /*PAR0: PCI:Base 0xa0000; size 0x1f000:*/
- *par++ = 0x480400d8; /*PAR1: GP BUS MEM:CS2:Base 0xd8, size 0x4:*/
- *par++ = 0x340100ea; /*PAR2: GP BUS IO:CS5:Base 0xea, size 0x1:*/
- *par++ = 0x380701f0; /*PAR3: GP BUS IO:CS6:Base 0x1f0, size 0x7:*/
- *par++ = 0x3c0003f6; /*PAR4: GP BUS IO:CS7:Base 0x3f6, size 0x0:*/
- *par++ = 0x35ff0400; /*PAR5: GP BUS IO:CS5:Base 0x400, size 0xff:*/
- *par++ = 0x35ff0600; /*PAR6: GP BUS IO:CS5:Base 0x600, size 0xff:*/
- *par++ = 0x35ff0800; /*PAR7: GP BUS IO:CS5:Base 0x800, size 0xff:*/
- *par++ = 0x35ff0a00; /*PAR8: GP BUS IO:CS5:Base 0xa00, size 0xff:*/
- *par++ = 0x35ff0e00; /*PAR9: GP BUS IO:CS5:Base 0xe00, size 0xff:*/
- *par++ = 0x34fb0104; /*PAR10: GP BUS IO:CS5:Base 0x104, size 0xfb:*/
- *par++ = 0x35af0200; /*PAR11: GP BUS IO:CS5:Base 0x200, size 0xaf:*/
- *par++ = 0x341f03e0; /*PAR12: GP BUS IO:CS5:Base 0x3e0, size 0x1f:*/
- *par++ = 0xe41c00c0; /*PAR13: SDRAM:code:cache:nowrite:Base 0xc0000, size 0x7000:*/
- *par++ = 0x545c00c8; /*PAR14: GP BUS MEM:CS5:Base 0xc8, size 0x5c:*/
- *par++ = 0x8a020200; /*PAR15: BOOTCS:code:nocache:write:Base 0x2000000, size 0x80000:*/
-}
-
-#include "cpu/amd/sc520/raminit.c"
-
-struct mem_controller {
- int i;
-};
-
-static int spd_read_byte(unsigned device, unsigned address) { }
-
-static inline void dumpmem(void){
- int i, j;
- unsigned char *l;
- unsigned char c;
-
- for(i = 0x4000; i < 0x5000; i += 16) {
- print_err_hex32(i); print_err(":");
- for(j = 0; j < 16; j++) {
- l = (unsigned char *)i + j;
- c = *l;
- print_err_hex8(c);
- print_err(" ");
- }
- print_err("\n");
- }
-}
-
-static inline void irqinit(void){
- volatile unsigned char *cp;
-#if 0
-/* these values taken from the msm board itself.
- * and they cause the board to not even come out of calibrating_delay_loop
- * if you can believe it. Our problem right now is no IDE or serial interrupts
- * So we'll try to put interrupts in, one at a time. IDE first.
- */
- cp = (volatile unsigned char *) 0xfffefd00;
- *cp = 0x11;
- cp = (volatile unsigned char *) 0xfffefd02;
- *cp = 0x02;
- cp = (volatile unsigned char *) 0xfffefd03;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd04;
- *cp = 0xf7;
- cp = (volatile unsigned char *) 0xfffefd08;
- *cp = 0xf7;
- cp = (volatile unsigned char *) 0xfffefd0a;
- *cp = 0x8b;
- cp = (volatile unsigned char *) 0xfffefd10;
- *cp = 0x18;
- cp = (volatile unsigned char *) 0xfffefd14;
- *cp = 0x09;
- cp = (volatile unsigned char *) 0xfffefd18;
- *cp = 0x88;
- cp = (volatile unsigned char *) 0xfffefd1a;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd1b;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd1c;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd20;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd21;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd22;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd28;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd29;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd30;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd31;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd32;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd33;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd40;
- *cp = 0x10;
- cp = (volatile unsigned char *) 0xfffefd41;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd42;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd43;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd44;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd45;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd46;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd50;
- *cp = 0x37;
- cp = (volatile unsigned char *) 0xfffefd51;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd52;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd53;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd54;
- *cp = 0x37;
- cp = (volatile unsigned char *) 0xfffefd55;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd56;
- *cp = 0x37;
- cp = (volatile unsigned char *) 0xfffefd57;
- *cp = 0x00;
- cp = (volatile unsigned char *) 0xfffefd58;
- *cp = 0xff;
- cp = (volatile unsigned char *) 0xfffefd59;
- *cp = 0xff;
- cp = (volatile unsigned char *) 0xfffefd5a;
- *cp = 0xff;
-#endif
-#if 0
- /* this fails too */
- /* IDE only ... */
- cp = (volatile unsigned char *) 0xfffefd56;
- *cp = 0xe;
-#endif
-}
-
-#include <cpu/intel/romstage.h>
-static void main(unsigned long bist)
-{
- volatile int i;
- for(i = 0; i < 100; i++)
- ;
-
- setupsc520();
- irqinit();
- console_init();
- for(i = 0; i < 100; i++)
- print_err("fill usart\n");
- // while(1)
- print_err("HI THERE!\n");
- // sizemem();
- staticmem();
-
-/* Void warranty when label is removed. */
-dummy_romcc_workaround_label:
- do { } while (0);
-
- print_err("c60 is "); print_err_hex16(*(unsigned short *)0xfffefc60);
- print_err("\n");
-
- // while(1)
- print_err("STATIC MEM DONE\n");
- post_code(0xee);
- print_err("loop forever ...\n");
-
-#if 0
-
- /* clear memory 1meg */
- __asm__ volatile(
- "1: \n\t"
- "movl %0, %%fs:(%1)\n\t"
- "addl $4,%1\n\t"
- "subl $4,%2\n\t"
- "jnz 1b\n\t"
- :
- : "a" (0), "D" (0), "c" (1024*1024)
- );
-
-
-#endif
-
-#if 0
- dump_pci_devices();
-#endif
-#if 0
- dump_pci_device(PCI_DEV(0, 0, 0));
-#endif
-
-#if 1
- {
- volatile unsigned char *src = (unsigned char *) 0x2000000 + 0x60000;
- volatile unsigned char *dst = (unsigned char *) 0x4000;
- for(i = 0; i < 0x20000; i++) {
- /*
- print_err("Set dst "); print_err_hex32((unsigned long) dst);
- print_err(" to "); print_err_hex32(*src); print_err("\n");
- */
- *dst = *src;
- //print_err(" dst is now "); print_err_hex32(*dst); print_err("\n");
- dst++, src++;
- post_code(i & 0xff);
- }
- }
- dumpmem();
- post_code(0x00);
-
- print_err("loop forever\n");
- post_code(0xdd);
- __asm__ volatile(
- "movl %0, %%edi\n\t"
- "jmp *%%edi\n\t"
- :
- : "a" (0x4000)
- );
-
- print_err("Oh dear, I'm afraid it didn't work...\n");
-
- while(1);
-#endif
-}
diff --git a/src/mainboard/technologic/Kconfig b/src/mainboard/technologic/Kconfig
deleted file mode 100644
index 792dc5ed74..0000000000
--- a/src/mainboard/technologic/Kconfig
+++ /dev/null
@@ -1,17 +0,0 @@
-if VENDOR_TECHNOLOGIC
-
-choice
- prompt "Mainboard model"
-
-config BOARD_TECHNOLOGIC_TS5300
- bool "TS-5300"
-
-endchoice
-
-source "src/mainboard/technologic/ts5300/Kconfig"
-
-config MAINBOARD_VENDOR
- string
- default "Technologic"
-
-endif # VENDOR_TECHNOLOGIC
diff --git a/src/mainboard/technologic/ts5300/Kconfig b/src/mainboard/technologic/ts5300/Kconfig
deleted file mode 100644
index 0006fd7903..0000000000
--- a/src/mainboard/technologic/ts5300/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-if BOARD_TECHNOLOGIC_TS5300
-
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select CPU_AMD_SC520
- select ROMCC
- select HAVE_OPTION_TABLE
- select HAVE_PIRQ_TABLE
- select BOARD_ROMSIZE_KB_1024
-
-config MAINBOARD_DIR
- string
- default technologic/ts5300
-
-config MAINBOARD_PART_NUMBER
- string
- default "TS-5300"
-
-config IRQ_SLOT_COUNT
- int
- default 2
-
-endif # BOARD_TECHNOLOGIC_TS5300
diff --git a/src/mainboard/technologic/ts5300/board_info.txt b/src/mainboard/technologic/ts5300/board_info.txt
deleted file mode 100644
index ef8a731821..0000000000
--- a/src/mainboard/technologic/ts5300/board_info.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-Category: half
-Board URL: http://www.embeddedarm.com/epc/ts5300-spec-h.html
diff --git a/src/mainboard/technologic/ts5300/cmos.layout b/src/mainboard/technologic/ts5300/cmos.layout
deleted file mode 100644
index 9050c3db7a..0000000000
--- a/src/mainboard/technologic/ts5300/cmos.layout
+++ /dev/null
@@ -1,72 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
diff --git a/src/mainboard/technologic/ts5300/devicetree.cb b/src/mainboard/technologic/ts5300/devicetree.cb
deleted file mode 100644
index 6c83e208ab..0000000000
--- a/src/mainboard/technologic/ts5300/devicetree.cb
+++ /dev/null
@@ -1,6 +0,0 @@
-chip cpu/amd/sc520
- device domain 0 on
- device pci 0.0 on end
- end
-
-end
diff --git a/src/mainboard/technologic/ts5300/irq_tables.c b/src/mainboard/technologic/ts5300/irq_tables.c
deleted file mode 100644
index 15dcddde12..0000000000
--- a/src/mainboard/technologic/ts5300/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-static const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x00<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0, /* IRQs devoted exclusively to PCI usage */
- 0x8086, /* Vendor */
- 0x122e, /* Device */
- 0, /* Miniport data */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0x50, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x12<<3)|0x0, {{0x30, 0x8000}, {0x00, 0x0}, {0x00, 0x0}, {0x00, 0x00}}, 0x0, 0x0},
- {0x00,(0x14<<3)|0x0, {{0x30, 0x8000}, {0x31, 0x0}, {0x32, 0x0}, {0x33, 0x00}}, 0x0, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr, &intel_irq_routing_table);
-}
diff --git a/src/mainboard/technologic/ts5300/mainboard.c b/src/mainboard/technologic/ts5300/mainboard.c
deleted file mode 100644
index 20b893ef71..0000000000
--- a/src/mainboard/technologic/ts5300/mainboard.c
+++ /dev/null
@@ -1,147 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <cpu/amd/sc520.h>
-
-
-#if 0
-static void irqdump(void)
-{
- volatile unsigned char *irq;
- void *mmcr;
-
-
- int i;
- int irqlist[] = {0xd00, 0xd02, 0xd03, 0xd04, 0xd08, 0xd0a,
- 0xd14, 0xd18, 0xd1a, 0xd1b, 0xd1c,
- 0xd20, 0xd21, 0xd22, 0xd28, 0xd29,
- 0xd30, 0xd31, 0xd32, 0xd33,
- 0xd40, 0xd41, 0xd42, 0xd43,0xd44, 0xd45, 0xd46,
- 0xd50, 0xd51, 0xd52, 0xd53,0xd54, 0xd55, 0xd56, 0xd57,0xd58, 0xd59, 0xd5a,
- -1};
- mmcr = (void *) 0xfffef000;
-
- printk(BIOS_ERR, "mmcr is %p\n", mmcr);
- for(i = 0; irqlist[i] >= 0; i++) {
- irq = mmcr + irqlist[i];
- printk(BIOS_ERR, "0x%x register @%p is 0x%x\n", irqlist[i], irq, *irq);
- }
-
-}
-#endif
-
-/* TODO: finish up mmcr struct in sc520.h, and;
- - set ADDDECTL (now done in raminit.c in cpu/amd/sc520
-*/
-static void mainboard_enable(struct device *dev)
-{
- volatile struct mmcr *mmcr = MMCRDEFAULT;
-
- /* currently, nothing in the device to use, so ignore it. */
- printk(BIOS_ERR, "Technologic Systems 5300 ENTER %s\n", __func__);
-
- /* from fuctory bios */
- /* NOTE: the following interrupt settings made interrupts work
- * for hard drive, and serial, but not for ethernet
- */
-
- printk(BIOS_ERR, "Setting up PIC\n");
- /* just do what they say and nobody gets hurt. */
- mmcr->pic.pcicr = 0 ;
- /* all ints to level */
- mmcr->pic.mpicmode = 0;
- mmcr->pic.sl1picmode = 0;
- mmcr->pic.sl2picmode = 0;
-
- mmcr->pic.intpinpol = 0x100;
-
- mmcr->pic.pit0map = 1;
- mmcr->pic.uart1map = 0x0c;
- mmcr->pic.uart2map = 0x0b;
- mmcr->pic.rtcmap = 0x03;
- mmcr->pic.ferrmap = 0x00;
- mmcr->pic.intpinpol = 0x100;
-
- mmcr->pic.gp0imap = 0x00;
- mmcr->pic.gp1imap = 0x02;
- mmcr->pic.gp2imap = 0x07;
- mmcr->pic.gp3imap = 0x05;
- mmcr->pic.gp4imap = 0x06;
- mmcr->pic.gp5imap = 0x0d;
- mmcr->pic.gp6imap = 0x15;
- mmcr->pic.gp7imap = 0x16;
- mmcr->pic.gp8imap = 0x3;
- mmcr->pic.gp9imap = 0x4;
- mmcr->pic.gp10imap = 0x9;
-
- // irqdump();
-
- printk(BIOS_ERR, "Setting up sysarb\n");
- mmcr->dbctl.dbctl = 0x01;
- mmcr->sysarb.ctl = 0x00;
- mmcr->sysarb.menb = 0x1f;
- mmcr->sysarb.prictl = 0x40000f0f;
-
- /* this is bios setting, depends on sysarb above */
- mmcr->hostbridge.ctl = 0x0;
- mmcr->hostbridge.tgtirqctl = 0x0;
- mmcr->hostbridge.tgtirqsta = 0xf00;
- mmcr->hostbridge.mstirqctl = 0x0;
- mmcr->hostbridge.mstirqsta = 0x708;
-
- printk(BIOS_ERR, "Setting up pio\n");
- /* pio */
- mmcr->pio.pfs15_0 = 0xffff;
- mmcr->pio.pfs31_16 = 0xffff;
- mmcr->pio.cspfs = 0xfe;
- mmcr->pio.clksel = 0x13;
- mmcr->pio.dsctl = 0x200;
- mmcr->pio.data15_0 = 0xde04;
- mmcr->pio.data31_16 = 0xef9f;
-
- printk(BIOS_ERR, "Setting up sysmap\n");
- /* system memory map */
- mmcr->sysmap.adddecctl = 0x04;
- mmcr->sysmap.wpvsta = 0x8006;
- mmcr->sysmap.par[1] = 0x340f0070;
- mmcr->sysmap.par[2] = 0x380701f0;
- mmcr->sysmap.par[3] = 0x3c0103f6;
- mmcr->sysmap.par[4] = 0x2c0f0300;
- mmcr->sysmap.par[5] = 0x447c00a0;
- mmcr->sysmap.par[6] = 0xe600000c;
- mmcr->sysmap.par[7] = 0x300046e8;
- mmcr->sysmap.par[8] = 0x500400d0;
- mmcr->sysmap.par[9] = 0x281f0140;
- mmcr->sysmap.par[13] = 0x8a07c940;
- mmcr->sysmap.par[15] = 0xee00400e;
-
- printk(BIOS_ERR, "Setting up gpctl\n");
- mmcr->gpctl.gpcsrt = 0x01;
- mmcr->gpctl.gpcspw = 0x09;
- mmcr->gpctl.gpcsoff = 0x01;
- mmcr->gpctl.gprdw = 0x07;
- mmcr->gpctl.gprdoff = 0x02;
- mmcr->gpctl.gpwrw = 0x07;
- mmcr->gpctl.gpwroff = 0x02;
-
- //mmcr->reset.sysinfo = 0xdf;
- //mmcr->reset.rescfg = 0x5;
- /* their IRQ table is wrong. Just hardwire it */
- //{
- // char pciints[4] = {15, 15, 15, 15};
- // pci_assign_irqs(0, 12, pciints);
- //}
- /* the assigned failed but we just noticed -- there is no
- * dma mapping, and selftest on e100 requires that dma work
- */
- mmcr->dmacontrol.extchanmapa = 0xf210;
- mmcr->dmacontrol.extchanmapb = 0xffff;
-
- printk(BIOS_ERR, "TS5300 EXIT %s\n", __func__);
-}
-
-struct chip_operations mainboard_ops = {
- .enable_dev = mainboard_enable,
-};
diff --git a/src/mainboard/technologic/ts5300/romstage.c b/src/mainboard/technologic/ts5300/romstage.c
deleted file mode 100644
index 9cafc64f37..0000000000
--- a/src/mainboard/technologic/ts5300/romstage.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * TS5300 specific initialization code.
- * written by Stefan Reinauer <stepan@coresystems.de>
- * (c) 2006 coresystems GmbH
- */
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <pc80/mc146818rtc.h>
-#include <console/console.h>
-#include "cpu/x86/bist.h"
-
-#define TS5300_LED_OFF outb((inb(0x77)&0xfe), 0x77)
-#define TS5300_LED_ON outb((inb(0x77)|1), 0x77)
-
-#define TS9500_LED_OFF outb((inb(0x19a)&0xfe), 0x19a)
-#define TS9500_LED_ON outb((inb(0x19a)|1), 0x19a)
-
-/* PAR register setup */
-void setup_pars(void)
-{
- volatile unsigned long *par;
- par = (unsigned long *) 0xfffef088;
-
- /* NOTE: Ron says, move this to mainboard.c */
- *par++ = 0x00000000;
- *par++ = 0x340f0070;
- *par++ = 0x380701f0;
- *par++ = 0x3c0103f6;
- *par++ = 0x2c0f0300;
- *par++ = 0x447c00a0;
- *par++ = 0xe600000c;
- *par++ = 0x300046e8;
- *par++ = 0x500400d0;
- *par++ = 0x281f0140;
- *par++ = 0x00000000;
- *par++ = 0x00000000;
- *par++ = 0x00000000;
- *par++ = 0x8a07c940; /* Flash setup */
- *par++ = 0x00000000;
- *par++ = 0xee00400e;
-}
-
-#include "cpu/amd/sc520/raminit.c"
-
-static void identify_ts9500(void)
-{
- unsigned i, val;
-
- TS9500_LED_ON;
-
- print_err("TS-9500 add-on found:\n");
- val=inb(0x19b);
- for (i=0; i<8; i++) {
- print_err(" DIP");
- print_err_char(i+0x31);
- print_err(": ");
- if((val&(1<<i))!=0)
- print_err("on\n");
- else
- print_err("off\n");
- }
- print_err("\n");
-
- val=inb(0x19a);
-
- for (i=6; i<8; i++) {
- print_err(" JP");
- print_err_char(i+0x30-5);
- print_err(": ");
- if((val&(1<<i))!=0)
- print_err("on\n");
- else
- print_err("off\n");
- }
- print_err("\n");
-
- TS9500_LED_OFF;
-}
-
-static void identify_system(void)
-{
- unsigned i,val;
-
- print_err("Mainboard: ");
- val=inb(0x74);
- switch(val) {
- case 0x50: print_err("TS-5300\n"); break;
- case 0x40: print_err("TS-5400\n"); break;
- case 0x60: print_err("TS-5500\n"); break;
- case 0x20: print_err("TS-5600\n"); break;
- case 0x70: print_err("TS-5700\n"); break;
- default: print_err("unknown\n"); break;
- }
-
- val=inb(0x75);
- print_err(" SRAM option: ");
- if((val&1)==0) print_err("not ");
- print_err("installed\n");
-
- print_err(" RS-485 option: ");
- if((val&2)==0) print_err("not ");
- print_err("installed\n");
-
- val=inb(0x76);
- print_err(" Temp. range: ");
- if((val&2)==0) print_err("commercial\n");
- else print_err("industrial\n");
-
- print_err("\n");
-
- val=inb(0x77);
- for (i=1; i<8; i++) {
- print_err(" JP");
- print_err_char(i+0x30);
- print_err(": ");
- if((val&(1<<i))!=0)
- print_err("on\n");
- else
- print_err("off\n");
- }
- print_err("\n");
-
- /* Detect TS-9500 */
- val=inb(0x19d);
- if(val==0x5f)
- identify_ts9500();
-}
-
-static void hard_reset(void)
-{
- print_err("Hard reset called.\n");
- while (1) ;
-}
-
-#include <cpu/intel/romstage.h>
-static void main(unsigned long bist)
-{
- volatile int i;
- unsigned val;
-
- TS5300_LED_ON;
-
- // Let the hardware settle a bit.
- for(i = 0; i < 100; i++)
- ;
-
- setupsc520();
- console_init();
-
-
- print_err("Technologic Systems TS5300 - http://www.embeddedx86.com/\n");
- staticmem();
-
-/* Void warranty when label is removed. */
-dummy_romcc_workaround_label:
- do { } while (0);
-
- print_err("Memory initialized: 32MB\n");
-
-#if 1
- identify_system();
-#endif
-
- TS5300_LED_OFF;
-}