summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorRichard Smith <smithbone@gmail.com>2006-11-01 14:21:31 +0000
committerStefan Reinauer <stepan@openbios.org>2006-11-01 14:21:31 +0000
commit6fb43c85f185e34dacb65f0b56dd1b4ee1c19cda (patch)
tree539d04c96d56aa870ac0e3d5252bf4952c31760f
parentf28674ec3c3349640733effc6026e7148b447550 (diff)
downloadcoreboot-6fb43c85f185e34dacb65f0b56dd1b4ee1c19cda.tar.xz
drop unsupported unfinished mainboard Advantech SOM GX DB533-C
Signed-off-by: Richard Smith <smithbone@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2483 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/mainboard/advantech/som_gx533c/Config.lb143
-rw-r--r--src/mainboard/advantech/som_gx533c/Options.lb160
-rw-r--r--src/mainboard/advantech/som_gx533c/auto.c134
-rw-r--r--src/mainboard/advantech/som_gx533c/chip.h5
-rw-r--r--src/mainboard/advantech/som_gx533c/cmos.layout74
-rw-r--r--src/mainboard/advantech/som_gx533c/debug.c66
-rw-r--r--src/mainboard/advantech/som_gx533c/failover.c32
-rw-r--r--src/mainboard/advantech/som_gx533c/irq_tables.c31
-rw-r--r--src/mainboard/advantech/som_gx533c/mainboard.c12
-rw-r--r--src/mainboard/advantech/som_gx533c/reset.c43
-rw-r--r--targets/advantech/som_gx533c/Config.lb37
11 files changed, 0 insertions, 737 deletions
diff --git a/src/mainboard/advantech/som_gx533c/Config.lb b/src/mainboard/advantech/som_gx533c/Config.lb
deleted file mode 100644
index 556e3ccf14..0000000000
--- a/src/mainboard/advantech/som_gx533c/Config.lb
+++ /dev/null
@@ -1,143 +0,0 @@
-##
-## Compute the location and size of where this firmware image
-## (linuxBIOS plus bootloader) will live in the boot rom chip.
-##
-if USE_FALLBACK_IMAGE
- default ROM_SECTION_SIZE = FALLBACK_SIZE
- default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
-else
- default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
- default ROM_SECTION_OFFSET = 0
-end
-
-##
-## Compute the start location and size size of
-## The linuxBIOS bootloader.
-##
-default CONFIG_ROM_STREAM_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
-default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
-
-##
-## Compute where this copy of linuxBIOS will start in the boot rom
-##
-default _ROMBASE = ( CONFIG_ROM_STREAM_START + PAYLOAD_SIZE )
-
-##
-## Compute a range of ROM that can cached to speed up linuxBIOS,
-## execution speed.
-##
-## XIP_ROM_SIZE must be a power of 2.
-## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
-##
-default XIP_ROM_SIZE=65536
-default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
-
-##
-## Set all of the defaults for an x86 architecture
-##
-
-arch i386 end
-
-##
-## Build the objects we have code for in this directory.
-##
-
-driver mainboard.o
-
-if HAVE_PIRQ_TABLE object irq_tables.o end
-#object reset.o
-
-##
-## Romcc output
-##
-makerule ./failover.E
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./failover.inc
- depends "$(MAINBOARD)/failover.c ./romcc"
- action "./romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
-end
-
-makerule ./auto.E
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -E -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-makerule ./auto.inc
- depends "$(MAINBOARD)/auto.c option_table.h ./romcc"
- action "./romcc -mcpu=i386 -O -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
-end
-
-##
-## Build our 16 bit and 32 bit linuxBIOS entry code
-##
-mainboardinit cpu/x86/16bit/entry16.inc
-mainboardinit cpu/x86/32bit/entry32.inc
-ldscript /cpu/x86/16bit/entry16.lds
-ldscript /cpu/x86/32bit/entry32.lds
-
-##
-## Build our reset vector (This is where linuxBIOS is entered)
-##
-if USE_FALLBACK_IMAGE
- mainboardinit cpu/x86/16bit/reset16.inc
- ldscript /cpu/x86/16bit/reset16.lds
-else
- mainboardinit cpu/x86/32bit/reset32.inc
- ldscript /cpu/x86/32bit/reset32.lds
-end
-
-### Should this be in the northbridge code?
-mainboardinit arch/i386/lib/cpu_reset.inc
-
-##
-## Include an id string (For safe flashing)
-##
-mainboardinit arch/i386/lib/id.inc
-ldscript /arch/i386/lib/id.lds
-
-###
-### This is the early phase of linuxBIOS startup
-### Things are delicate and we test to see if we should
-### failover to another image.
-###
-if USE_FALLBACK_IMAGE
- ldscript /arch/i386/lib/failover.lds
- mainboardinit ./failover.inc
-end
-
-###
-### O.k. We aren't just an intermediary anymore!
-###
-
-##
-## Setup RAM
-##
-mainboardinit cpu/x86/fpu/enable_fpu.inc
-mainboardinit ./auto.inc
-
-##
-## Include the secondary Configuration files
-##
-dir /pc80
-config chip.h
-
-chip northbridge/amd/gx2
- device pci_domain 0 on
- device pci 0.0 on end
- chip southbridge/amd/cs5535
- device pci 12.0 on
- device pci 12.1 off end # SMI
- device pci 12.2 on end # IDE
- device pci 12.3 off end # Audio
- device pci 12.4 off end # VGA
- end
- end
- end
-
- chip cpu/amd/model_gx2
- end
-
-end
-
diff --git a/src/mainboard/advantech/som_gx533c/Options.lb b/src/mainboard/advantech/som_gx533c/Options.lb
deleted file mode 100644
index df3d1bdfb6..0000000000
--- a/src/mainboard/advantech/som_gx533c/Options.lb
+++ /dev/null
@@ -1,160 +0,0 @@
-uses HAVE_MP_TABLE
-uses HAVE_PIRQ_TABLE
-uses USE_FALLBACK_IMAGE
-uses HAVE_FALLBACK_BOOT
-uses HAVE_HARD_RESET
-uses HAVE_OPTION_TABLE
-uses USE_OPTION_TABLE
-uses CONFIG_ROM_STREAM
-uses IRQ_SLOT_COUNT
-uses MAINBOARD
-uses MAINBOARD_VENDOR
-uses MAINBOARD_PART_NUMBER
-uses LINUXBIOS_EXTRA_VERSION
-uses ARCH
-uses FALLBACK_SIZE
-uses STACK_SIZE
-uses HEAP_SIZE
-uses ROM_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_IMAGE_SIZE
-uses ROM_SECTION_SIZE
-uses ROM_SECTION_OFFSET
-uses CONFIG_ROM_STREAM_START
-uses PAYLOAD_SIZE
-uses _ROMBASE
-uses _RAMBASE
-uses XIP_ROM_SIZE
-uses XIP_ROM_BASE
-uses HAVE_MP_TABLE
-uses CROSS_COMPILE
-uses CC
-uses HOSTCC
-uses OBJCOPY
-uses DEFAULT_CONSOLE_LOGLEVEL
-uses MAXIMUM_CONSOLE_LOGLEVEL
-uses CONFIG_CONSOLE_SERIAL8250
-uses TTYS0_BAUD
-uses TTYS0_BASE
-uses TTYS0_LCS
-uses CONFIG_UDELAY_TSC
-uses CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2
-
-## ROM_SIZE is the size of boot ROM that this board will use.
-default ROM_SIZE = 256*1024
-
-###
-### Build options
-###
-
-##
-## Build code for the fallback boot
-##
-default HAVE_FALLBACK_BOOT=1
-
-##
-## no MP table
-##
-default HAVE_MP_TABLE=0
-
-##
-## Build code to reset the motherboard from linuxBIOS
-##
-default HAVE_HARD_RESET=0
-
-## Delay timer options
-##
-default CONFIG_UDELAY_TSC=1
-default CONFIG_TSC_X86RDTSC_CALIBRATE_WITH_TIMER2=1
-
-##
-## Build code to export a programmable irq routing table
-##
-default HAVE_PIRQ_TABLE=1
-default IRQ_SLOT_COUNT=2
-#object irq_tables.o
-
-##
-## Build code to export a CMOS option table
-##
-default HAVE_OPTION_TABLE=0
-
-###
-### LinuxBIOS layout values
-###
-
-## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
-default ROM_IMAGE_SIZE = 65536
-default FALLBACK_SIZE = 131072
-
-##
-## Use a small 8K stack
-##
-default STACK_SIZE=0x2000
-
-##
-## Use a small 16K heap
-##
-default HEAP_SIZE=0x4000
-
-##
-## Only use the option table in a normal image
-##
-#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
-default USE_OPTION_TABLE = 0
-
-default _RAMBASE = 0x00004000
-
-default CONFIG_ROM_STREAM = 1
-
-##
-## The default compiler
-##
-default CROSS_COMPILE=""
-default CC="$(CROSS_COMPILE)gcc -m32"
-default HOSTCC="gcc"
-
-##
-## The Serial Console
-##
-
-# To Enable the Serial Console
-default CONFIG_CONSOLE_SERIAL8250=1
-
-## Select the serial console baud rate
-default TTYS0_BAUD=115200
-#default TTYS0_BAUD=57600
-#default TTYS0_BAUD=38400
-#default TTYS0_BAUD=19200
-#default TTYS0_BAUD=9600
-#default TTYS0_BAUD=4800
-#default TTYS0_BAUD=2400
-#default TTYS0_BAUD=1200
-
-# Select the serial console base port
-default TTYS0_BASE=0x3f8
-
-# Select the serial protocol
-# This defaults to 8 data bits, 1 stop bit, and no parity
-default TTYS0_LCS=0x3
-
-##
-### Select the linuxBIOS loglevel
-##
-## EMERG 1 system is unusable
-## ALERT 2 action must be taken immediately
-## CRIT 3 critical conditions
-## ERR 4 error conditions
-## WARNING 5 warning conditions
-## NOTICE 6 normal but significant condition
-## INFO 7 informational
-## DEBUG 8 debug-level messages
-## SPEW 9 Way too many details
-
-## Request this level of debugging output
-default DEFAULT_CONSOLE_LOGLEVEL=8
-## At a maximum only compile in this level of debugging
-default MAXIMUM_CONSOLE_LOGLEVEL=8
-
-end
-
diff --git a/src/mainboard/advantech/som_gx533c/auto.c b/src/mainboard/advantech/som_gx533c/auto.c
deleted file mode 100644
index 138ca720a3..0000000000
--- a/src/mainboard/advantech/som_gx533c/auto.c
+++ /dev/null
@@ -1,134 +0,0 @@
-#define ASSEMBLY 1
-
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <arch/io.h>
-#include <device/pnp_def.h>
-#include <arch/romcc_io.h>
-#include <arch/hlt.h>
-#include "pc80/serial.c"
-#include "arch/i386/lib/console.c"
-#include "ram/ramtest.c"
-#include "superio/nsc/pc87360/pc87360_early_serial.c"
-#include "cpu/x86/bist.h"
-#include "cpu/x86/msr.h"
-#include <cpu/amd/gx2def.h>
-
-#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
-
-#include "southbridge/amd/cs5535/cs5535_early_smbus.c"
-#include "southbridge/amd/cs5535/cs5535_early_setup.c"
-#include "northbridge/amd/gx2/raminit.h"
-
-/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */
-static void sdram_set_spd_registers(const struct mem_controller *ctrl)
-{
- msr_t msr;
- /* 1. Initialize GLMC registers base on SPD values,
- * Hard coded as XpressROM for now */
- //print_debug("sdram_enable step 1\r\n");
- msr = rdmsr(0x20000018);
- msr.hi = 0x10075012;
- msr.lo = 0x3900;
- wrmsr(0x20000018, msr);
-
- msr = rdmsr(0x20000019);
- msr.hi = 0x18000008;
- msr.lo = 0x696332a3;
- wrmsr(0x20000019, msr);
-
-}
-
-#include "northbridge/amd/gx2/raminit.c"
-#include "sdram/generic_sdram.c"
-
-#define PLLMSRhi 0x00000226
-#define PLLMSRlo 0x00000008
-#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
-#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
-#include "northbridge/amd/gx2/pll_reset.c"
-
-
-static void msr_init(void)
-{
- __builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
-
- __builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
- __builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
- __builtin_wrmsr(0x10000026, 0x400fffc0, 0x2cfbc040);
- __builtin_wrmsr(0x10000027, 0xfff00000, 0xff);
- __builtin_wrmsr(0x10000028, 0x7bf00100, 0x2000000f);
- __builtin_wrmsr(0x1000002c, 0xff030003, 0x20000000);
-
- __builtin_wrmsr(0x10000080, 0x3, 0x0);
-
- __builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
- __builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
- __builtin_wrmsr(0x40000023, 0x400fffc0, 0x20000040);
- __builtin_wrmsr(0x40000024, 0xff4ffffc, 0x200000ef);
- __builtin_wrmsr(0x40000029, 0x7bf00100, 0x2000000f);
- __builtin_wrmsr(0x4000002d, 0xff030003, 0x20000000);
-
-
- __builtin_wrmsr(0x50002001, 0x27, 0x0);
- __builtin_wrmsr(0x4c002001, 0x1, 0x0);
-}
-
-
-static void main(unsigned long bist)
-{
- static const struct mem_controller memctrl [] = {
- {.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
- };
- unsigned char temp;
-
- msr_init();
-
- pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
- uart_init();
- console_init();
-
- cs5535_early_setup();
- print_err("done cs5535 early\n");
- pll_reset();
- print_err("done pll_reset\n");
- /* Halt if there was a built in self test failure */
- //report_bist_failure(bist);
-
- sdram_initialize(1, memctrl);
-
- print_err("Done sdram_initialize\n");
- print_err("Disable watchdog\n");
- outb( 0x87, 0x4E); //enter SuperIO configuration mode
- outb( 0x87, 0x4E);
-
-
- outb(0x20, 0x4e);
- temp = inb(0x4f);
- print_debug_hex8(temp);
- if (temp != 0x52){
- print_err("CAN NOT READ SUPERIO VID\n");
- }
-
- outb(0x29, 0x4e);
- outb(0x7c, 0x4f);
-
- outb( 0x07, 0x4E); //enable logical device 9
- outb( 0x09, 0x4F);
- outb(0x30, 0x4e);
- outb(1, 0x4f);
- outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019
- outb( 0xC7, 0x4F);
- outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables
- temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
- print_debug_hex8(temp);print_debug(":");
- temp = temp & ~8;
- outb( temp, 0x4F);
- temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
- print_debug_hex8(temp);print_debug("\n");
- /* Check all of memory */
-// ram_check(0, 16384);
-// ram_check(0x20000, 0x24000);
-// ram_check(0x00000000, 640*1024);
-
-}
diff --git a/src/mainboard/advantech/som_gx533c/chip.h b/src/mainboard/advantech/som_gx533c/chip.h
deleted file mode 100644
index 45e8068522..0000000000
--- a/src/mainboard/advantech/som_gx533c/chip.h
+++ /dev/null
@@ -1,5 +0,0 @@
-extern struct chip_operations mainboard_advantech_som_gx533c_ops;
-
-struct mainboard_advantech_som_gx533c_config {
- int nothing;
-};
diff --git a/src/mainboard/advantech/som_gx533c/cmos.layout b/src/mainboard/advantech/som_gx533c/cmos.layout
deleted file mode 100644
index 5ba4c032c1..0000000000
--- a/src/mainboard/advantech/som_gx533c/cmos.layout
+++ /dev/null
@@ -1,74 +0,0 @@
-entries
-
-#start-bit length config config-ID name
-#0 8 r 0 seconds
-#8 8 r 0 alarm_seconds
-#16 8 r 0 minutes
-#24 8 r 0 alarm_minutes
-#32 8 r 0 hours
-#40 8 r 0 alarm_hours
-#48 8 r 0 day_of_week
-#56 8 r 0 day_of_month
-#64 8 r 0 month
-#72 8 r 0 year
-#80 4 r 0 rate_select
-#84 3 r 0 REF_Clock
-#87 1 r 0 UIP
-#88 1 r 0 auto_switch_DST
-#89 1 r 0 24_hour_mode
-#90 1 r 0 binary_values_enable
-#91 1 r 0 square-wave_out_enable
-#92 1 r 0 update_finished_enable
-#93 1 r 0 alarm_interrupt_enable
-#94 1 r 0 periodic_interrupt_enable
-#95 1 r 0 disable_clock_updates
-#96 288 r 0 temporary_filler
-0 384 r 0 reserved_memory
-384 1 e 4 boot_option
-385 1 e 4 last_boot
-386 1 e 1 ECC_memory
-388 4 r 0 reboot_bits
-392 3 e 5 baud_rate
-400 1 e 1 power_on_after_fail
-412 4 e 6 debug_level
-416 4 e 7 boot_first
-420 4 e 7 boot_second
-424 4 e 7 boot_third
-428 4 h 0 boot_index
-432 8 h 0 boot_countdown
-1008 16 h 0 check_sum
-
-enumerations
-
-#ID value text
-1 0 Disable
-1 1 Enable
-2 0 Enable
-2 1 Disable
-4 0 Fallback
-4 1 Normal
-5 0 115200
-5 1 57600
-5 2 38400
-5 3 19200
-5 4 9600
-5 5 4800
-5 6 2400
-5 7 1200
-6 6 Notice
-6 7 Info
-6 8 Debug
-6 9 Spew
-7 0 Network
-7 1 HDD
-7 2 Floppy
-7 8 Fallback_Network
-7 9 Fallback_HDD
-7 10 Fallback_Floppy
-#7 3 ROM
-
-checksums
-
-checksum 392 1007 1008
-
-
diff --git a/src/mainboard/advantech/som_gx533c/debug.c b/src/mainboard/advantech/som_gx533c/debug.c
deleted file mode 100644
index 7eeabdef47..0000000000
--- a/src/mainboard/advantech/som_gx533c/debug.c
+++ /dev/null
@@ -1,66 +0,0 @@
-
-static void print_debug_pci_dev(unsigned dev)
-{
- print_debug("PCI: ");
- print_debug_hex8((dev >> 16) & 0xff);
- print_debug_char(':');
- print_debug_hex8((dev >> 11) & 0x1f);
- print_debug_char('.');
- print_debug_hex8((dev >> 8) & 7);
-}
-
-static void print_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- print_debug_pci_dev(dev);
- print_debug("\r\n");
- }
-}
-
-static void dump_pci_device(unsigned dev)
-{
- int i;
- print_debug_pci_dev(dev);
- print_debug("\r\n");
-
- for(i = 0; i <= 255; i++) {
- unsigned char val;
- if ((i & 0x0f) == 0) {
- print_debug_hex8(i);
- print_debug_char(':');
- }
- val = pci_read_config8(dev, i);
- print_debug_char(' ');
- print_debug_hex8(val);
- if ((i & 0x0f) == 0x0f) {
- print_debug("\r\n");
- }
- }
-}
-
-static void dump_pci_devices(void)
-{
- device_t dev;
- for(dev = PCI_DEV(0, 0, 0);
- dev <= PCI_DEV(0, 0x1f, 0x7);
- dev += PCI_DEV(0,0,1)) {
- uint32_t id;
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- continue;
- }
- dump_pci_device(dev);
- }
-}
diff --git a/src/mainboard/advantech/som_gx533c/failover.c b/src/mainboard/advantech/som_gx533c/failover.c
deleted file mode 100644
index bdcb9eaed2..0000000000
--- a/src/mainboard/advantech/som_gx533c/failover.c
+++ /dev/null
@@ -1,32 +0,0 @@
-#define ASSEMBLY 1
-#include <stdint.h>
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <arch/io.h>
-#include "arch/romcc_io.h"
-#include "pc80/mc146818rtc_early.c"
-
-static unsigned long main(unsigned long bist)
-{
- /* This is the primary cpu how should I boot? */
- if (do_normal_boot()) {
- goto normal_image;
- }
- else {
- goto fallback_image;
- }
- normal_image:
- asm volatile ("jmp __normal_image"
- : /* outputs */
- : "a" (bist) /* inputs */
- : /* clobbers */
- );
- cpu_reset:
- asm volatile ("jmp __cpu_reset"
- : /* outputs */
- : "a"(bist) /* inputs */
- : /* clobbers */
- );
- fallback_image:
- return bist;
-}
diff --git a/src/mainboard/advantech/som_gx533c/irq_tables.c b/src/mainboard/advantech/som_gx533c/irq_tables.c
deleted file mode 100644
index 636f129119..0000000000
--- a/src/mainboard/advantech/som_gx533c/irq_tables.c
+++ /dev/null
@@ -1,31 +0,0 @@
-/* This file was generated by getpir.c, do not modify!
- (but if you do, please run checkpir on it to verify)
- * Contains the IRQ Routing Table dumped directly from your memory, which BIOS sets up
- *
- * Documentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
-*/
-
-#include <arch/pirq_routing.h>
-
-const struct irq_routing_table intel_irq_routing_table = {
- PIRQ_SIGNATURE, /* u32 signature */
- PIRQ_VERSION, /* u16 version */
- 32+16*2, /* there can be total 2 devices on the bus */
- 0x00, /* Where the interrupt router lies (bus) */
- (0x12<<3)|0x0, /* Where the interrupt router lies (dev) */
- 0x800, /* IRQs devoted exclusively to PCI usage */
- 0x1078, /* Vendor */
- 0x2, /* Device */
- 0, /* Crap (miniport) */
- { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
- 0xdf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
- {
- /* bus, dev|fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
- {0x00,(0x0e<<3)|0x0, {{0x02, 0xdeb8}, {0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0x0deb8}}, 0x1, 0x0},
- {0x00,(0x0f<<3)|0x0, {{0x03, 0xdeb8}, {0x04, 0xdeb8}, {0x01, 0xdeb8}, {0x02, 0x0deb8}}, 0x2, 0x0},
- }
-};
-unsigned long write_pirq_routing_table(unsigned long addr)
-{
- return copy_pirq_routing_table(addr);
-}
diff --git a/src/mainboard/advantech/som_gx533c/mainboard.c b/src/mainboard/advantech/som_gx533c/mainboard.c
deleted file mode 100644
index 31d03455b4..0000000000
--- a/src/mainboard/advantech/som_gx533c/mainboard.c
+++ /dev/null
@@ -1,12 +0,0 @@
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#include <arch/io.h>
-#include "chip.h"
-
-struct chip_operations mainboard_advantech_som_gx533c_ops = {
- CHIP_NAME("Advantech SOM GX DB533-C mainboard")
-};
-
diff --git a/src/mainboard/advantech/som_gx533c/reset.c b/src/mainboard/advantech/som_gx533c/reset.c
deleted file mode 100644
index 5796e17dc8..0000000000
--- a/src/mainboard/advantech/som_gx533c/reset.c
+++ /dev/null
@@ -1,43 +0,0 @@
-#if 0
-//#include "arch/romcc_io.h"
-#include <arch/io.h>
-
-typedef unsigned device_t;
-
-#define PCI_DEV(BUS, DEV, FN) ( \
- (((BUS) & 0xFF) << 16) | \
- (((DEV) & 0x1f) << 11) | \
- (((FN) & 0x7) << 8))
-
-static void pci_write_config8(device_t dev, unsigned where, unsigned char value)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- outb(value, 0xCFC + (addr & 3));
-}
-
-static void pci_write_config32(device_t dev, unsigned where, unsigned value)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- outl(value, 0xCFC);
-}
-
-static unsigned pci_read_config32(device_t dev, unsigned where)
-{
- unsigned addr;
- addr = dev | where;
- outl(0x80000000 | (addr & ~3), 0xCF8);
- return inl(0xCFC);
-}
-
-#include "../../../northbridge/amd/amdk8/reset_test.c"
-
-void hard_reset(void)
-{
- set_bios_reset();
- pci_write_config8(PCI_DEV(1, 0x04, 0), 0x47, 1);
-}
-#endif
diff --git a/targets/advantech/som_gx533c/Config.lb b/targets/advantech/som_gx533c/Config.lb
deleted file mode 100644
index da0ce1f634..0000000000
--- a/targets/advantech/som_gx533c/Config.lb
+++ /dev/null
@@ -1,37 +0,0 @@
-# Config file for the Advantech eval kit with a SOM-DB2301 baseboard
-# and a SOM 2354 Cpu module. (gx533)
-# This will make a target directory of som_gx533c
-
-target som_gx533c
-mainboard advantech/som_gx533c
-
-option ROM_SIZE=512*1024
-
-option MAXIMUM_CONSOLE_LOGLEVEL=9
-option DEFAULT_CONSOLE_LOGLEVEL=9
-
-romimage "normal"
- option USE_FALLBACK_IMAGE=0
- option ROM_IMAGE_SIZE=0x10000
- option LINUXBIOS_EXTRA_VERSION=".0Normal"
-# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-# payload ../../../../tg3--ide_disk.zelf
-# payload ../../../../../lnxieepro100.ebi
- payload /etc/hosts
-# payload /home/hamish/work/etherboot/eb-5.2.6-lne100.elf
-# payload /tmp/filo.elf
-end
-
-romimage "fallback"
- option USE_FALLBACK_IMAGE=1
- option ROM_IMAGE_SIZE=0x10000
- option LINUXBIOS_EXTRA_VERSION=".0Fallback"
-# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
-# payload ../../../../tg3--ide_disk.zelf
-# payload ../../../../../lnxieepro100.ebia
- payload /etc/hosts
-# payload /home/hamish/work/etherboot/eb-5.2.6-lne100.elf
-# payload /tmp/filo.elf
-end
-
-buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"