summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@coresystems.de>2010-04-21 20:06:10 +0000
committerStefan Reinauer <stepan@openbios.org>2010-04-21 20:06:10 +0000
commit9839cbd53fdcfcee52c406d9f52af924192e618d (patch)
treea38daaa0b545aaf36a7ad5f5df9dfe73e08d97da
parentcf036d1266d7ec307aac437105b094acbc9681ec (diff)
downloadcoreboot-9839cbd53fdcfcee52c406d9f52af924192e618d.tar.xz
* clean up all but two warnings on artecgroup dbe61
* integrate vsm init into normal x86.c code (so it can run above 1M) * call void main(unsigned long bist) except void cache_as_ram_main(void) on Geode LX (as we do on almost all other platforms now) * Unify Geode LX MSR setup (will bring most non-working LX targets back to life) Signed-off-by: Stefan Reinauer <stepan@coresystems.de> Acked-by: Patrick Georgi <patrick.georgi@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5471 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
-rw-r--r--src/cpu/amd/model_gx2/Kconfig2
-rw-r--r--src/cpu/amd/model_gx2/Makefile.inc1
-rw-r--r--src/cpu/amd/model_gx2/vsmsetup.c222
-rw-r--r--src/cpu/amd/model_lx/Kconfig2
-rw-r--r--src/cpu/amd/model_lx/Makefile.inc1
-rw-r--r--src/cpu/amd/model_lx/cache_as_ram.inc14
-rw-r--r--src/cpu/amd/model_lx/msrinit.c53
-rw-r--r--src/cpu/amd/model_lx/vsmsetup.c764
-rw-r--r--src/devices/oprom/x86.c87
-rw-r--r--src/devices/oprom/x86_asm.S99
-rw-r--r--src/include/cpu/amd/lxdef.h8
-rw-r--r--src/mainboard/amd/db800/romstage.c39
-rw-r--r--src/mainboard/amd/norwich/romstage.c39
-rw-r--r--src/mainboard/artecgroup/dbe61/Kconfig8
-rw-r--r--src/mainboard/artecgroup/dbe61/romstage.c53
-rw-r--r--src/mainboard/digitallogic/msm800sev/romstage.c23
-rw-r--r--src/mainboard/iei/pcisa-lx-800-r10/romstage.c39
-rw-r--r--src/mainboard/lippert/roadrunner-lx/romstage.c39
-rw-r--r--src/mainboard/lippert/spacerunner-lx/romstage.c39
-rw-r--r--src/mainboard/pcengines/alix1c/romstage.c24
-rw-r--r--src/mainboard/winent/pl6064/romstage.c39
-rw-r--r--src/northbridge/amd/gx2/Kconfig2
-rw-r--r--src/northbridge/amd/lx/Kconfig2
-rw-r--r--src/northbridge/amd/lx/northbridge.c14
-rw-r--r--src/southbridge/amd/cs5536/cs5536.h9
-rw-r--r--src/southbridge/amd/cs5536/cs5536_early_setup.c2
26 files changed, 332 insertions, 1292 deletions
diff --git a/src/cpu/amd/model_gx2/Kconfig b/src/cpu/amd/model_gx2/Kconfig
index 8aa3420ecb..3eaddca379 100644
--- a/src/cpu/amd/model_gx2/Kconfig
+++ b/src/cpu/amd/model_gx2/Kconfig
@@ -42,7 +42,7 @@ config GEODE_VSA
config VSA_FILE
string "AMD Geode GX2 VSA path and filename"
- depends on GEODE_VSA
+ depends on GEODE_VSA && CPU_AMD_GX2
default "gpl_vsa_gx_102.bin"
help
The path and filename of the file to use as VSA.
diff --git a/src/cpu/amd/model_gx2/Makefile.inc b/src/cpu/amd/model_gx2/Makefile.inc
index cdc6846898..205ddae3f3 100644
--- a/src/cpu/amd/model_gx2/Makefile.inc
+++ b/src/cpu/amd/model_gx2/Makefile.inc
@@ -4,4 +4,3 @@ subdirs-y += ../../x86/cache
subdirs-y += ../../x86/smm
driver-y += model_gx2_init.o
obj-y += cpubug.o
-obj-y += vsmsetup.o
diff --git a/src/cpu/amd/model_gx2/vsmsetup.c b/src/cpu/amd/model_gx2/vsmsetup.c
deleted file mode 100644
index a284a9c726..0000000000
--- a/src/cpu/amd/model_gx2/vsmsetup.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2000 Erik Arjan Hendriks
- * Copyright (C) 2000 Scyld Computing Corporation
- * Copyright (C) 2001 University of California. LA-CC Number 01-67.
- * Copyright (C) 2005 Nick.Barker9@btinternet.com
- * Copyright (C) 2007 coresystems GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * LA-CC is the Los Alamos Control and Compliance Number, see also:
- * http://supply.lanl.gov/property/customs/eximguide/default.shtml
- */
-
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <string.h>
-#include <cpu/cpu.h>
-#include <cpu/x86/lapic.h>
-#include <cpu/x86/cache.h>
-#include <arch/io.h>
-#include <cbfs.h>
-
-void do_vsmbios(void);
-
-#define VSA2_BUFFER 0x60000
-#define VSA2_ENTRY_POINT 0x60020
-#define VSA2_SIGNATURE 0x56534132 // 'VSA2' returned in EAX
-#define SIGNATURE 0x03
-/**
- * TODO.
- *
- * The address arguments to this function are PHYSICAL ADDRESSES!
- *
- * @param smm TODO.
- * @param sysm TODO.
- */
-static void real_mode_switch_call_vsm(unsigned long smm, unsigned long sysm)
-{
- u16 entryHi = (VSA2_ENTRY_POINT & 0xffff0000) >> 4;
- u16 entryLo = (VSA2_ENTRY_POINT & 0xffff);
-
- __asm__ __volatile__(
- /* Paranoia -- does ecx get saved? not sure. This is
- * the easiest safe thing to do.
- */
- " pushal \n"
- /* Save the stack. */
- " mov %%esp, __stack \n"
- " jmp 1f \n"
- "__stack: .long 0 \n"
- "1:\n"
- /* Get devfn into %%ecx. */
- " movl %%esp, %%ebp \n"
- /* Get the smm and sysm args into ecx and edx. */
- " movl %0, %%ecx \n"
- " movl %1, %%edx \n"
- /* Load 'our' gdt. */
- " lgdt %%cs:__mygdtaddr \n"
- /* This configures CS properly for real mode. */
- " ljmp $0x28, $__rms_16bit\n"
- "__rms_16bit: \n"
- " .code16 \n"
- /* 16 bit code from here on... */
- /* Load the segment registers with properly configured segment
- * descriptors. They will retain these configurations (limits,
- * writability, etc.) once protected mode is turned off.
- */
- " mov $0x30, %%ax \n"
- " mov %%ax, %%ds \n"
- " mov %%ax, %%es \n"
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov %%ax, %%ss \n"
- /* Turn off protection (bit 0 in CR0). */
- " movl %%cr0, %%eax \n"
- " andl $0xFFFFFFFE, %%eax \n"
- " movl %%eax, %%cr0 \n"
- /* Now really going into real mode. */
- " ljmp $0, $__rms_real\n"
- "__rms_real: \n"
-
- /* Put the stack at the end of page zero.
- * That way we can easily share it between real and protected,
- * since the 16-bit ESP at segment 0 will work for any case.
- */
-
- /* Setup a stack. */
- " mov $0x0, %%ax \n"
- " mov %%ax, %%ss \n"
- " movl $0x1000, %%eax \n"
- " movl %%eax, %%esp \n"
- /* Dump zeros in the other segregs. */
- " mov %%ax, %%es \n"
- /* FIXME: Big real mode for gs, fs? */
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov $0x40, %%ax \n"
- " mov %%ax, %%ds \n"
- /* " mov %%cx, %%ax \n" */
- " movl %0, %%ecx \n"
- " movl %1, %%edx \n"
- /* Call the VSA2 entry point address. */
- " lcall %2, %3\n"
- /* If we got here, just about done.
- * Need to get back to protected mode.
- */
- " movl %%cr0, %%eax \n"
- " orl $0x0000001, %%eax\n" /* PE = 1 */
- " movl %%eax, %%cr0 \n"
- /* Now that we are in protected mode,
- * jump to a 32 bit code segment.
- */
- " data32 ljmp $0x10, $vsmrestart\n"
- "vsmrestart:\n"
- " .code32\n"
- " movw $0x18, %%ax \n"
- " mov %%ax, %%ds \n"
- " mov %%ax, %%es \n"
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov %%ax, %%ss \n"
- /* Restore proper gdt. */
- " lgdt %%cs:gdtarg \n"
- ".globl vsm_exit \n"
- "vsm_exit: \n"
- " mov __stack, %%esp \n"
- " popal \n"::
- "g" (smm), "g"(sysm), "g"(entryHi), "g"(entryLo)
- );
-}
-
-__asm__(".text\n" "real_mode_switch_end:\n");
-extern char real_mode_switch_end[];
-
-/* andrei: Some VSA virtual register helpers: raw read and MSR read. */
-
-static u32 VSA_vrRead(u16 classIndex)
-{
- unsigned eax, ebx, ecx, edx;
- asm volatile (
- "movw $0x0AC1C, %%dx \n"
- "orl $0x0FC530000, %%eax \n"
- "outl %%eax, %%dx \n"
- "addb $2, %%dl \n"
- "inw %%dx, %%ax \n"
- : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
- : "a"(classIndex)
- );
-
- return eax;
-}
-
-static u32 VSA_msrRead(u32 msrAddr)
-{
- unsigned eax, ebx, ecx, edx;
- asm volatile (
- "movw $0x0AC1C, %%dx \n"
- "movl $0x0FC530007, %%eax \n"
- "outl %%eax, %%dx \n"
- "addb $2, %%dl \n"
- "inw %%dx, %%ax \n"
- : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
- : "c"(msrAddr)
- );
-
- return eax;
-}
-
-void do_vsmbios(void)
-{
- unsigned char *buf;
- int i;
-
- printk(BIOS_ERR, "do_vsmbios\n");
- /* Clear VSM BIOS data area. */
- for (i = 0x400; i < 0x500; i++)
- *(volatile unsigned char *)i = 0;
- if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) {
- printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n");
- }
- buf = VSA2_BUFFER;
-
- printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n",
- buf[0x20], buf[0x21], buf[0x22], buf[0x23]);
- /* Check for POST code at start of vsainit.bin. If you don't see it,
- * don't bother.
- */
- if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) ||
- (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) {
- die("FATAL: no vsainit.bin signature, skipping!\n");
- }
-
- /* ecx gets smm, edx gets sysm. */
- printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n");
-// real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM);
-
- /* Restart Timer 1. */
- outb(0x56, 0x43);
- outb(0x12, 0x41);
-
- /* Check that VSA is running OK. */
- if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE)
- printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n");
- else
- die("FATAL: VSA2 VR signature not valid, install failed!\n");
-}
-
diff --git a/src/cpu/amd/model_lx/Kconfig b/src/cpu/amd/model_lx/Kconfig
index 769c600a46..66e20ec45e 100644
--- a/src/cpu/amd/model_lx/Kconfig
+++ b/src/cpu/amd/model_lx/Kconfig
@@ -23,7 +23,7 @@ config GEODE_VSA
config VSA_FILE
string "AMD Geode LX VSA path and filename"
- depends on GEODE_VSA
+ depends on GEODE_VSA && CPU_AMD_LX
default "gpl_vsa_lx_102.bin"
help
The path and filename of the file to use as VSA.
diff --git a/src/cpu/amd/model_lx/Makefile.inc b/src/cpu/amd/model_lx/Makefile.inc
index 66dcd31ffe..4752378d41 100644
--- a/src/cpu/amd/model_lx/Makefile.inc
+++ b/src/cpu/amd/model_lx/Makefile.inc
@@ -5,6 +5,5 @@ subdirs-y += ../../x86/smm
driver-y += model_lx_init.o
obj-y += cpubug.o
-obj-y += vsmsetup.o
cpu_incs += $(src)/cpu/amd/model_lx/cache_as_ram.inc
diff --git a/src/cpu/amd/model_lx/cache_as_ram.inc b/src/cpu/amd/model_lx/cache_as_ram.inc
index 096a96155d..f776a7a727 100644
--- a/src/cpu/amd/model_lx/cache_as_ram.inc
+++ b/src/cpu/amd/model_lx/cache_as_ram.inc
@@ -34,6 +34,8 @@
/**
/***************************************************************************/
DCacheSetup:
+ /* Save the BIST result */
+ movl %eax, %ebx
invd
/* set cache properties */
@@ -173,9 +175,17 @@ DCacheSetupBad:
hlt /* issues */
jmp DCacheSetupBad
DCacheSetupGood:
-
/* Go do early init and memory setup */
- call cache_as_ram_main
+
+ /* Restore the BIST result */
+ movl %ebx, %eax
+ movl %esp, %ebp
+ pushl %eax
+
+ post_code(0x23)
+
+ /* Call romstage.c main function */
+ call main
done_cache_as_ram_main:
/* We now run over the stack-in-cache, copying it back to itself to invalidate the cache */
diff --git a/src/cpu/amd/model_lx/msrinit.c b/src/cpu/amd/model_lx/msrinit.c
new file mode 100644
index 0000000000..2ed7c94f71
--- /dev/null
+++ b/src/cpu/amd/model_lx/msrinit.c
@@ -0,0 +1,53 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+struct msrinit {
+ u32 msrnum;
+ msr_t msr;
+};
+
+static const struct msrinit msr_table[] =
+{
+ {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
+ * Rom Properties: Write Serialize, WriteProtect.
+ * RomBase: 0xFFFC0
+ * SysTop to RomBase Properties: Write Serialize, Cache Disable.
+ * SysTop: 0x000A0
+ * System Memory Properties: (Write Back) */
+ {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
+ {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
+ {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
+
+ /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
+ {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
+ {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
+ {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
+ {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
+ {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
+ {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
+};
+
+static void msr_init(void)
+{
+ int i;
+ for (i = 0; i < ARRAY_SIZE(msr_table); i++)
+ wrmsr(msr_table[i].msrnum, msr_table[i].msr);
+}
+
+
diff --git a/src/cpu/amd/model_lx/vsmsetup.c b/src/cpu/amd/model_lx/vsmsetup.c
deleted file mode 100644
index d2a3c58344..0000000000
--- a/src/cpu/amd/model_lx/vsmsetup.c
+++ /dev/null
@@ -1,764 +0,0 @@
-#include <console/console.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <device/pci_ops.h>
-#undef __KERNEL__
-#include <arch/io.h>
-#include <string.h>
-#include <cpu/amd/lxdef.h>
-#include <cpu/amd/vr.h>
-#include <cbfs.h>
-
-#define VSA2_BUFFER 0x60000
-#define VSA2_ENTRY_POINT 0x60020
-
-/* vsmsetup.c derived from vgabios.c. Derived from: */
-
-/*------------------------------------------------------------ -*- C -*-
- * 2 Kernel Monte a.k.a. Linux loading Linux on x86
- *
- * Erik Arjan Hendriks <hendriks@lanl.gov>
- *
- * This version is a derivative of the original two kernel monte
- * which is (C) 2000 Scyld.
- *
- * Copyright (C) 2000 Scyld Computing Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- *
- * Portions related to the alpha architecture are:
- *
- * Copyright(C) 2001 University of California. LA-CC Number 01-67.
- * This software has been authored by an employee or employees of the
- * University of California, operator of the Los Alamos National
- * Laboratory under Contract No. W-7405-ENG-36 with the U.S.
- * Department of Energy. The U.S. Government has rights to use,
- * reproduce, and distribute this software. If the software is
- * modified to produce derivative works, such modified software should
- * be clearly marked, so as not to confuse it with the version
- * available from LANL.
- *
- * This software may be used and distributed according to the terms
- * of the GNU General Public License, incorporated herein by
- * reference to http://www.gnu.org/licenses/gpl.html.
- *
- * This software is provided by the author(s) "as is" and any express
- * or implied warranties, including, but not limited to, the implied
- * warranties of merchantability and fitness for a particular purpose
- * are disclaimed. In no event shall the author(s) be liable for any
- * direct, indirect, incidental, special, exemplary, or consequential
- * damages (including, but not limited to, procurement of substitute
- * goods or services; loss of use, data, or profits; or business
- * interruption) however caused and on any theory of liability,
- * whether in contract, strict liability, or tort (including
- * negligence or otherwise) arising in any way out of the use of this
- * software, even if advised of the possibility of such damage.
- *
- * $Id: vsmsetup.c,v 1.8 2006/09/08 12:47:57 andrei Exp $
- *
- * Copyright (C) 2007 Advanced Micro Devices, Inc.
- *
- *--------------------------------------------------------------------*/
-
-/* Modified to be a self sufficient plug in so that it can be used
- without reliance on other parts of core coreboot
- (C) 2005 Nick.Barker9@btinternet.com
-
- Used initially for epia-m where there are problems getting the bios
- emulator to successfully run this bios.
-*/
-
-/* Declare a temporary global descriptor table - necessary because the
- Core part of the bios no longer sets up any 16 bit segments */
-__asm__(
- /* pointer to original gdt */
- "gdtarg: \n"
- " .word gdt_limit \n"
- " .long gdt \n"
- /* compute the table limit */
- "__mygdt_limit = __mygdt_end - __mygdt - 1 \n"
- "__mygdtaddr: \n"
- " .word __mygdt_limit \n"
- " .long __mygdt \n"
- "__mygdt: \n"
- /* selgdt 0, unused */
- " .word 0x0000, 0x0000 \n"
- " .byte 0x00, 0x00, 0x00, 0x00 \n"
- /* selgdt 8, unused */
- " .word 0x0000, 0x0000 \n"
- " .byte 0x00, 0x00, 0x00, 0x00 \n"
- /* selgdt 0x10, flat code segment */
- " .word 0xffff, 0x0000 \n"
- " .byte 0x00, 0x9b, 0xcf, 0x00 \n"
- /* selgdt 0x18, flat data segment */
- " .word 0xffff, 0x0000 \n"
- " .byte 0x00, 0x93, 0xcf, 0x00 \n"
- /* selgdt 0x20, unused */
- " .word 0x0000, 0x0000 \n"
- " .byte 0x00, 0x00, 0x00, 0x00 \n"
- /* selgdt 0x28 16-bit 64k code at 0x00000000 */
- " .word 0xffff, 0x0000 \n"
- " .byte 0, 0x9a, 0, 0 \n"
- /* selgdt 0x30 16-bit 64k data at 0x00000000 */
- " .word 0xffff, 0x0000 \n"
- " .byte 0, 0x92, 0, 0 \n"
- "__mygdt_end: \n"
-);
-
-/* Declare a pointer to where our idt is going to be i.e. at mem zero */
-__asm__(
- "__myidt: \n"
- /* 16-bit limit */
- " .word 1023 \n"
- /* 24-bit base */
- " .long 0 \n"
- " .word 0 \n"
-);
-
-/* The address arguments to this function are PHYSICAL ADDRESSES */
-static void real_mode_switch_call_vsm(unsigned long smm, unsigned long sysm)
-{
- uint16_t entryHi = (VSA2_ENTRY_POINT & 0xffff0000) >> 4;
- uint16_t entryLo = (VSA2_ENTRY_POINT & 0xffff);
-
- __asm__ __volatile__(
- // paranoia -- does ecx get saved? not sure. This is
- // the easiest safe thing to do.
- " pushal \n"
- /* save the stack */
- " mov %%esp, __stack \n"
- " jmp 1f \n"
- "__stack: .long 0 \n"
- "1:\n"
- /* get devfn into %%ecx */
- " movl %%esp, %%ebp \n"
-#if 0
- /* I'm not happy about that pushal followed by esp-relative
- * references. Just do hard-codes for now
- */
- " movl 8(%%ebp), %%ecx \n"
- " movl 12(%%ebp), %%edx \n"
-#endif
- " movl %0, %%ecx \n"
- " movl %1, %%edx \n"
- /* load 'our' gdt */
- " lgdt %%cs:__mygdtaddr \n"
- /* This configures CS properly for real mode. */
- " ljmp $0x28, $__rms_16bit\n"
- "__rms_16bit: \n"
- " .code16 \n"
- /* 16 bit code from here on... */
- /* Load the segment registers w/ properly configured segment
- * descriptors. They will retain these configurations (limits,
- * writability, etc.) once protected mode is turned off. */
- " mov $0x30, %%ax \n"
- " mov %%ax, %%ds \n"
- " mov %%ax, %%es \n"
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov %%ax, %%ss \n"
- /* Turn off protection (bit 0 in CR0) */
- " movl %%cr0, %%eax \n"
- " andl $0xFFFFFFFE, %%eax \n"
- " movl %%eax, %%cr0 \n"
- /* Now really going into real mode */
- " ljmp $0, $__rms_real\n"
- "__rms_real: \n"
-
- /* put the stack at the end of page zero.
- * that way we can easily share it between real and protected,
- * since the 16-bit ESP at segment 0 will work for any case.
- */
-
- /* Setup a stack */
- " mov $0x0, %%ax \n"
- " mov %%ax, %%ss \n"
- " movl $0x1000, %%eax \n"
- " movl %%eax, %%esp \n"
- /* Load our 16 it idt */
- " xor %%ax, %%ax \n"
- " mov %%ax, %%ds \n"
- " lidt __myidt \n"
- /* Dump zeros in the other segregs */
- " mov %%ax, %%es \n"
- /* FixMe: Big real mode for gs, fs? */
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov $0x40, %%ax \n"
- " mov %%ax, %%ds \n"
- //" mov %%cx, %%ax \n"
- " movl %0, %%ecx \n"
- " movl %1, %%edx \n"
- /* call the VSA2 entry point address */
- " lcall %2, %3\n"
- /* if we got here, just about done.
- * Need to get back to protected mode */
- " movl %%cr0, %%eax \n"
- " orl $0x0000001, %%eax\n" /* PE = 1 */
- " movl %%eax, %%cr0 \n"
- /* Now that we are in protected mode jump to a 32 bit code segment. */
- " data32 ljmp $0x10, $vsmrestart\n"
- "vsmrestart:\n"
- " .code32\n"
- " movw $0x18, %%ax \n"
- " mov %%ax, %%ds \n"
- " mov %%ax, %%es \n"
- " mov %%ax, %%fs \n"
- " mov %%ax, %%gs \n"
- " mov %%ax, %%ss \n"
- /* restore proper gdt and idt */
- " lgdt %%cs:gdtarg \n"
- " lidt idtarg \n"
- ".globl vsm_exit \n"
- "vsm_exit: \n"
- " mov __stack, %%esp \n"
- " popal \n"::
- "g" (smm), "g"(sysm), "g"(entryHi), "g"(entryLo)
- );
-}
-
-__asm__(".text\n" "real_mode_switch_end:\n");
-extern char real_mode_switch_end[];
-
-// andrei: some VSA virtual register helpers: raw read and MSR read
-
-uint32_t VSA_vrRead(uint16_t classIndex)
-{
- unsigned eax, ebx, ecx, edx;
- asm volatile (
- "movw $0x0AC1C, %%dx \n"
- "orl $0x0FC530000, %%eax \n"
- "outl %%eax, %%dx \n"
- "addb $2, %%dl \n"
- "inw %%dx, %%ax \n"
- : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
- : "a"(classIndex)
- );
-
- return eax;
-}
-
-uint32_t VSA_msrRead(uint32_t msrAddr)
-{
- unsigned eax, ebx, ecx, edx;
- asm volatile (
- "movw $0x0AC1C, %%dx \n"
- "movl $0x0FC530007, %%eax \n"
- "outl %%eax, %%dx \n"
- "addb $2, %%dl \n"
- "inw %%dx, %%ax \n"
- : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
- : "c"(msrAddr)
- );
-
- return eax;
-}
-
-void do_vsmbios(void)
-{
- unsigned char *buf;
- int i;
-
- printk(BIOS_ERR, "do_vsmbios\n");
- /* clear vsm bios data area */
- for (i = 0x400; i < 0x500; i++) {
- *(volatile unsigned char *)i = 0;
- }
-
- /* declare rom address here - keep any config data out of the way
- * of core LXB stuff */
-
- /* this is the base of rom on the LX at present. At some point, this has to be
- * much better parameterized
- */
-
- if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) {
- printk(BIOS_ERR, "do_vsmbios: Failed to load VSA.\n");
- }
- buf = (unsigned char *)VSA2_BUFFER;
- printk(BIOS_DEBUG, "buf %p *buf %d buf[256k] %d\n",
- buf, buf[0], buf[SMM_SIZE * 1024]);
- printk(BIOS_DEBUG, "buf[0x20] signature is %x:%x:%x:%x\n",
- buf[0x20], buf[0x21], buf[0x22], buf[0x23]);
- /* check for post code at start of vsainit.bin. If you don't see it,
- don't bother. */
- if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) ||
- (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) {
- printk(BIOS_ERR, "do_vsmbios: no vsainit.bin signature, skipping!\n");
- return;
- }
-
- /* ecx gets smm, edx gets sysm */
- printk(BIOS_ERR, "Call real_mode_switch_call_vsm\n");
- real_mode_switch_call_vsm(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM);
-
- /* restart timer 1 */
- outb(0x56, 0x43);
- outb(0x12, 0x41);
-
- // check that VSA is running OK
- if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE)
- printk(BIOS_DEBUG, "do_vsmbios: VSA2 VR signature verified\n");
- else
- printk(BIOS_ERR, "do_vsmbios: VSA2 VR signature not valid, install failed!\n");
-}
-
-// we had hoped to avoid this.
-// this is a stub IDT only. It's main purpose is to ignore calls
-// to the BIOS.
-// no longer. Dammit. We have to respond to these.
-struct realidt {
- unsigned short offset, cs;
-};
-
-// from a handy writeup that andrey found.
-
-// handler.
-// There are some assumptions we can make here.
-// First, the Top Of Stack (TOS) is located on the top of page zero.
-// we can share this stack between real and protected mode.
-// that simplifies a lot of things ...
-// we'll just push all the registers on the stack as longwords,
-// and pop to protected mode.
-// second, since this only ever runs as part of coreboot,
-// we know all the segment register values -- so we don't save any.
-// keep the handler that calls things small. It can do a call to
-// more complex code in coreboot itself. This helps a lot as we don't
-// have to do address fixup in this little stub, and calls are absolute
-// so the handler is relocatable.
-void handler(void)
-{
- __asm__ __volatile__(
- " .code16 \n"
- "idthandle: \n"
- " pushal \n"
- " movb $0, %al \n"
- " ljmp $0, $callbiosint16\n"
- "end_idthandle: \n"
- " .code32 \n"
- );
-}
-
-void debughandler(void)
-{
- __asm__ __volatile__(
- " .code16 \n"
- "debughandle: \n"
- " pushw %cx \n"
- " movw $250, %cx \n"
- "dbh1: \n"
- " loop dbh1 \n"
- " popw %cx \n"
- " iret \n"
- "end_debughandle: \n"
- ".code32 \n"
- );
-}
-
-// Calling conventions. The first C function is called with this stuff
-// on the stack. They look like value parameters, but note that if you
-// modify them they will go back to the INTx function modified.
-// the C function will call the biosint function with these as
-// REFERENCE parameters. In this way, we can easily get
-// returns back to the INTx caller (i.e. vgabios)
-void callbiosint(void)
-{
- __asm__ __volatile__(
- " .code16 \n"
- "callbiosint16: \n"
- " push %ds \n"
- " push %es \n"
- " push %fs \n"
- " push %gs \n"
- // clean up the int #. To save space we put it in the lower
- // byte. But the top 24 bits are junk.
- " andl $0xff, %eax\n"
- // this push does two things:
- // - put the INT # on the stack as a parameter
- // - provides us with a temp for the %cr0 mods.
- " pushl %eax \n"
- " movb $0xbb, %al\n"
- " outb %al, $0x80\n"
- " movl %cr0, %eax\n"
- " orl $0x00000001, %eax\n" /* PE = 1 */
- " movl %eax, %cr0\n"
- /* Now that we are in protected mode jump to a 32 bit code segment. */
- " data32 ljmp $0x10, $biosprotect\n"
- "biosprotect: \n"
- " .code32 \n"
- " movw $0x18, %ax\n"
- " mov %ax, %ds\n"
- " mov %ax, %es\n"
- " mov %ax, %fs\n"
- " mov %ax, %gs\n"
- " mov %ax, %ss\n"
- " lidt idtarg \n"
- " call biosint \n"
- // back to real mode ...
- " ljmp $0x28, $__rms_16bit2\n"
- "__rms_16bit2: \n"
- " .code16 \n"
- /* 16 bit code from here on... */
- /* Load the segment registers w/ properly configured segment
- * descriptors. They will retain these configurations (limits,
- * writability, etc.) once protected mode is turned off. */
- " mov $0x30, %ax\n"
- " mov %ax, %ds\n"
- " mov %ax, %es\n"
- " mov %ax, %fs\n"
- " mov %ax, %gs\n"
- " mov %ax, %ss\n"
- /* Turn off protection (bit 0 in CR0) */
- " movl %cr0, %eax \n"
- " andl $0xFFFFFFFE, %eax \n"
- " movl %eax, %cr0 \n"
- /* Now really going into real mode */
- " ljmp $0, $__rms_real2 \n"
- "__rms_real2: \n"
- /* Setup a stack
- * FixME: where is esp? */
- /* no need for a fix here. The esp is shared from 32-bit and 16-bit mode.
- * you have to hack on the ss, but the esp remains the same across
- * modes.
- */
- " mov $0x0, %ax \n"
- " mov %ax, %ss \n"
- /* debugging for RGM */
- " mov $0x11, %al \n"
- " outb %al, $0x80 \n"
- /* Load our 16 bit idt */
- " xor %ax, %ax \n"
- " mov %ax, %ds \n"
- " lidt __myidt \n"
- /* Dump zeros in the other segregs */
- " mov %ax, %es \n"
- " mov %ax, %fs \n"
- " mov %ax, %gs \n"
- " mov $0x40, %ax \n"
- " mov %ax, %ds \n"
- /* pop the INT # that you pushed earlier */
- " popl %eax \n"
- " pop %gs \n"
- " pop %fs \n"
- " pop %es \n"
- " pop %ds \n"
- " popal \n"
- " iret \n"
- " .code32 \n"
- );
-}
-
-enum {
- PCIBIOS = 0x1a,
- MEMSIZE = 0x12
-};
-
-int pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
- unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
- unsigned long *pecx, unsigned long *peax, unsigned long *pflags);
-
-int handleint21(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
- unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
- unsigned long *pecx, unsigned long *peax,
- unsigned long *pflags);
-
-int biosint(unsigned long intnumber,
- unsigned long gsfs, unsigned long dses,
- unsigned long edi, unsigned long esi,
- unsigned long ebp, unsigned long esp,
- unsigned long ebx, unsigned long edx,
- unsigned long ecx, unsigned long eax,
- unsigned long cs_ip, unsigned short stackflags)
-{
- unsigned long ip;
- unsigned long cs;
- unsigned long flags;
- int ret = -1;
-
- ip = cs_ip & 0xffff;
- cs = cs_ip >> 16;
- flags = stackflags;
-
- printk(BIOS_DEBUG, "biosint: INT# 0x%lx\n", intnumber);
- printk(BIOS_DEBUG, "biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n",
- eax, ebx, ecx, edx);
- printk(BIOS_DEBUG, "biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n",
- ebp, esp, edi, esi);
- printk(BIOS_DEBUG, "biosint: ip 0x%x cs 0x%x flags 0x%x\n",
- (u32)ip, (u32)cs, (u32)flags);
- printk(BIOS_DEBUG, "biosint: gs 0x%x fs 0x%x ds 0x%x es 0x%x\n",
- (u16)(gsfs >> 16), (u16)(gsfs & 0xffff), (u16)(dses >> 16), (u16)(dses & 0xffff));
-
- // cases in a good compiler are just as good as your own tables.
- switch (intnumber) {
- case 0 ... 15:
- // These are not BIOS service, but the CPU-generated exceptions
- printk(BIOS_INFO, "biosint: Oops, exception 0x%x\n", (u32)intnumber);
- if (esp < 0x1000) {
- printk(BIOS_DEBUG, "Stack contents: ");
- while (esp < 0x1000) {
- printk(BIOS_DEBUG, "0x%04x ", *(unsigned short *)esp);
- esp += 2;
- }
- printk(BIOS_DEBUG, "\n");
- }
- printk(BIOS_DEBUG, "biosint: Bailing out ... not now\n");
- // "longjmp"
- //vga_exit();
- break;
-
- case PCIBIOS:
- ret = pcibios(&edi, &esi, &ebp, &esp,
- &ebx, &edx, &ecx, &eax, &flags);
- break;
- case MEMSIZE:
- // who cares.
- eax = 128 * 1024;
- ret = 0;
- break;
- case 0x15:
- ret = handleint21(&edi, &esi, &ebp, &esp,
- &ebx, &edx, &ecx, &eax, &flags);
- break;
- default:
- printk(BIOS_INFO, "BIOSINT: Unsupported int #0x%x\n", (u32)intnumber);
- break;
- }
- if (ret)
- flags |= 1; // carry flags
- else
- flags &= ~1;
- stackflags = flags;
- return ret;
-}
-
-void setup_realmode_idt(void)
-{
- extern unsigned char idthandle, end_idthandle;
- extern unsigned char debughandle, end_debughandle;
-
- int i;
- struct realidt *idts = (struct realidt *)0;
- int codesize = &end_idthandle - &idthandle;
- unsigned char *intbyte, *codeptr;
-
- // for each int, we create a customized little handler
- // that just pushes %ax, puts the int # in %al,
- // then calls the common interrupt handler.
- // this necessitated because intel didn't know much about
- // architecture when they did the 8086 (it shows)
- // (hmm do they know anymore even now :-)
- // obviously you can see I don't really care about memory
- // efficiency. If I did I would probe back through the stack
- // and get it that way. But that's really disgusting.
- for (i = 0; i < 256; i++) {
- idts[i].cs = 0;
- codeptr = (unsigned char *)4096 + i * codesize;
- idts[i].offset = (unsigned)codeptr;
- memcpy(codeptr, &idthandle, codesize);
- intbyte = codeptr + 3;
- *intbyte = i;
- }
-
- // fixed entry points
-
- // VGA BIOSes tend to hardcode f000:f065 as the previous handler of
- // int10.
- // calling convention here is the same as INTs, we can reuse
- // the int entry code.
- codeptr = (unsigned char *)0xff065;
- memcpy(codeptr, &idthandle, codesize);
- intbyte = codeptr + 3;
- *intbyte = 0x42; /* int42 is the relocated int10 */
-
- /* debug handler - useful to set a programmable delay between instructions if the
- TF bit is set upon call to real mode */
- idts[1].cs = 0;
- idts[1].offset = 16384;
- memcpy((void *)16384, &debughandle, &end_debughandle - &debughandle);
-}
-
-enum {
- CHECK = 0xb001,
- FINDDEV = 0xb102,
- READCONFBYTE = 0xb108,
- READCONFWORD = 0xb109,
- READCONFDWORD = 0xb10a,
- WRITECONFBYTE = 0xb10b,
- WRITECONFWORD = 0xb10c,
- WRITECONFDWORD = 0xb10d
-};
-
-// errors go in AH. Just set these up so that word assigns
-// will work. KISS.
-enum {
- PCIBIOS_NODEV = 0x8600,
- PCIBIOS_BADREG = 0x8700
-};
-
-int
-pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
- unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
- unsigned long *pecx, unsigned long *peax, unsigned long *pflags)
-{
- unsigned short func = (unsigned short)*peax;
- int retval = 0;
- unsigned short devid, vendorid, devfn;
- short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */
- unsigned char bus;
- device_t dev;
-
- switch (func) {
- case CHECK:
- *pedx = 0x4350;
- *pecx = 0x2049;
- retval = 0;
- break;
- case FINDDEV:
- {
- devid = *pecx;
- vendorid = *pedx;
- devindex = *pesi;
- dev = 0;
- while ((dev = dev_find_device(vendorid, devid, dev))) {
- if (devindex <= 0)
- break;
- devindex--;
- }
- if (dev) {
- unsigned short busdevfn;
- *peax = 0;
- // busnum is an unsigned char;
- // devfn is an int, so we mask it off.
- busdevfn = (dev->bus->secondary << 8)
- | (dev->path.pci.devfn & 0xff);
- printk(BIOS_DEBUG, "0x%x: return 0x%x\n", func,
- busdevfn);
- *pebx = busdevfn;
- retval = 0;
- } else {
- *peax = PCIBIOS_NODEV;
- retval = -1;
- }
- }
- break;
- case READCONFDWORD:
- case READCONFWORD:
- case READCONFBYTE:
- case WRITECONFDWORD:
- case WRITECONFWORD:
- case WRITECONFBYTE:
- {
- unsigned long dword;
- unsigned short word;
- unsigned char byte;
- unsigned char reg;
-
- devfn = *pebx & 0xff;
- bus = *pebx >> 8;
- reg = *pedi;
- dev = dev_find_slot(bus, devfn);
- if (!dev) {
- printk(BIOS_DEBUG, "0x%x: BAD DEVICE bus %d devfn 0x%x\n",
- func, bus, devfn);
- // idiots. the pcibios guys assumed you'd never pass a bad bus/devfn!
- *peax = PCIBIOS_BADREG;
- retval = -1;
- }
- switch (func) {
- case READCONFBYTE:
- byte = pci_read_config8(dev, reg);
- *pecx = byte;
- break;
- case READCONFWORD:
- word = pci_read_config16(dev, reg);
- *pecx = word;
- break;
- case READCONFDWORD:
- dword = pci_read_config32(dev, reg);
- *pecx = dword;
- break;
- case WRITECONFBYTE:
- byte = *pecx;
- pci_write_config8(dev, reg, byte);
- break;
- case WRITECONFWORD:
- word = *pecx;
- pci_write_config16(dev, reg, word);
- break;
- case WRITECONFDWORD:
- dword = *pecx;
- pci_write_config32(dev, reg, dword);
- break;
- }
-
- if (retval)
- retval = PCIBIOS_BADREG;
- printk(BIOS_DEBUG, "0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n",
- func, bus, devfn, reg, *pecx);
- *peax = 0;
- retval = 0;
- }
- break;
- default:
- printk(BIOS_ERR, "UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func);
- break;
- }
-
- return retval;
-}
-
-int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp,
- unsigned long *esp, unsigned long *ebx, unsigned long *edx,
- unsigned long *ecx, unsigned long *eax, unsigned long *flags)
-{
- int res = -1;
- printk(BIOS_DEBUG, "handleint21, eax 0x%x\n", (u32)*eax);
- switch (*eax & 0xffff) {
- case 0x5f19:
- break;
- case 0x5f18:
- *eax = 0x5f;
- *ebx = 0x545; // MCLK = 133, 32M frame buffer, 256 M main memory
- *ecx = 0x060;
- res = 0;
- break;
- case 0x5f00:
- *eax = 0x8600;
- break;
- case 0x5f01:
- *eax = 0x5f;
- *ecx = (*ecx & 0xffffff00) | 2; // panel type = 2 = 1024 * 768
- res = 0;
- break;
- case 0x5f02:
- *eax = 0x5f;
- *ebx = (*ebx & 0xffff0000) | 2;
- *ecx = (*ecx & 0xffff0000) | 0x401; // PAL + crt only
- *edx = (*edx & 0xffff0000) | 0; // TV Layout - default
- res = 0;
- break;
- case 0x5f0f:
- *eax = 0x860f;
- break;
- case 0xBEA7:
- *eax = 66;
- break;
- case 0xBEA4:
- *eax = 500;
- break;
- }
- return res;
-}
diff --git a/src/devices/oprom/x86.c b/src/devices/oprom/x86.c
index 2ce5b4534d..436f57b8bc 100644
--- a/src/devices/oprom/x86.c
+++ b/src/devices/oprom/x86.c
@@ -1,7 +1,8 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2009 coresystems GmbH
+ * Copyright (C) 2007 Advanced Micro Devices, Inc.
+ * Copyright (C) 2009-2010 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -36,9 +37,11 @@ void x86_exception(struct eregs *info);
extern unsigned char __idt_handler, __idt_handler_size;
extern unsigned char __realmode_code, __realmode_code_size;
extern unsigned char __run_optionrom, __run_interrupt;
+extern unsigned char __run_vsa;
void (*run_optionrom)(u32 devfn) __attribute__((regparm(0))) = (void *)&__run_optionrom;
void (*vga_enable_console)(void) __attribute__((regparm(0))) = (void *)&__run_interrupt;
+void (*run_vsa)(u32 smm, u32 sysmem) __attribute__((regparm(0))) = (void *)&__run_vsa;
int (*intXX_handler[256])(struct eregs *regs) = { NULL };
@@ -160,6 +163,88 @@ void run_bios(struct device *dev, unsigned long addr)
printk(BIOS_DEBUG, "... Option ROM returned.\n");
}
+#if defined(CONFIG_GEODE_VSA) && CONFIG_GEODE_VSA
+#include <cpu/amd/lxdef.h>
+#include <cpu/amd/vr.h>
+#include <cbfs.h>
+
+#define VSA2_BUFFER 0x60000
+#define VSA2_ENTRY_POINT 0x60020
+
+// TODO move to a header file.
+void do_vsmbios(void);
+
+/* VSA virtual register helper */
+static u32 VSA_vrRead(u16 classIndex)
+{
+ u32 eax, ebx, ecx, edx;
+ asm volatile (
+ "movw $0x0AC1C, %%dx\n"
+ "orl $0x0FC530000, %%eax\n"
+ "outl %%eax, %%dx\n"
+ "addb $2, %%dl\n"
+ "inw %%dx, %%ax\n"
+ : "=a" (eax), "=b"(ebx), "=c"(ecx), "=d"(edx)
+ : "a"(classIndex)
+ );
+
+ return eax;
+}
+
+void do_vsmbios(void)
+{
+ printk(BIOS_DEBUG, "Preparing for VSA...\n");
+
+ /* clear bios data area */
+ memset((void *)0x400, 0, 0x200);
+
+ /* Set up C interrupt handlers */
+ setup_interrupt_handlers();
+
+ /* Setting up realmode IDT */
+ setup_realmode_idt();
+
+ memcpy(REALMODE_BASE, &__realmode_code, (size_t)&__realmode_code_size);
+ printk(BIOS_SPEW, "VSA: Real mode stub @%p: %d bytes\n", REALMODE_BASE,
+ (u32)&__realmode_code_size);
+
+ if ((unsigned int)cbfs_load_stage("vsa") != VSA2_ENTRY_POINT) {
+ printk(BIOS_ERR, "Failed to load VSA.\n");
+ return;
+ }
+
+ unsigned char *buf = (unsigned char *)VSA2_BUFFER;
+ printk(BIOS_DEBUG, "VSA: Buffer @%p *[0k]=%02x\n", buf, buf[0]);
+ printk(BIOS_DEBUG, "VSA: Signature *[0x20-0x23] is %02x:%02x:%02x:%02x\n",
+ buf[0x20], buf[0x21], buf[0x22], buf[0x23]);
+
+ /* Check for code to emit POST code at start of VSA. */
+ if ((buf[0x20] != 0xb0) || (buf[0x21] != 0x10) ||
+ (buf[0x22] != 0xe6) || (buf[0x23] != 0x80)) {
+ printk(BIOS_WARNING, "VSA: Signature incorrect. Install failed.\n");
+ return;
+ }
+
+ printk(BIOS_DEBUG, "Calling VSA module...\n");
+ /* ECX gets SMM, EDX gets SYSMEM */
+ run_vsa(MSR_GLIU0_SMM, MSR_GLIU0_SYSMEM);
+ printk(BIOS_DEBUG, "... VSA module returned.\n");
+
+ /* Restart timer 1 */
+ outb(0x56, 0x43);
+ outb(0x12, 0x41);
+
+ /* Check that VSA is running OK */
+ if (VSA_vrRead(SIGNATURE) == VSA2_SIGNATURE)
+ printk(BIOS_DEBUG, "VSM: VSA2 VR signature verified.\n");
+ else
+ printk(BIOS_ERR, "VSM: VSA2 VR signature not valid. Install failed.\n");
+}
+#endif
+
+/* interrupt_handler() is called from assembler code only,
+ * so there is no use in putting the prototype into a header file.
+ */
int __attribute__((regparm(0))) interrupt_handler(u32 intnumber,
u32 gsfs, u32 dses,
u32 edi, u32 esi,
diff --git a/src/devices/oprom/x86_asm.S b/src/devices/oprom/x86_asm.S
index 616aa8675f..194b4cb64c 100644
--- a/src/devices/oprom/x86_asm.S
+++ b/src/devices/oprom/x86_asm.S
@@ -155,6 +155,105 @@ __run_optionrom = RELOCATED(.)
popal
ret
+#if defined(CONFIG_GEODE_VSA) && CONFIG_GEODE_VSA
+#define VSA2_ENTRY_POINT 0x60020
+
+ .globl __run_vsa
+__run_vsa = RELOCATED(.)
+ /* save all registers to the stack */
+ pushal
+
+ /* Move the protected mode stack to a safe place */
+ mov %esp, __stack
+
+ movl %esp, %ebp
+ /* This function is called with regparm=0 and we have
+ * to skip the 32 byte from pushal:
+ */
+ movl 36(%ebp), %ecx
+ movl 40(%ebp), %edx
+
+ /* Activate the right segment descriptor real mode. */
+ ljmp $0x28, $RELOCATED(1f)
+1:
+.code16
+ /* 16 bit code from here on... */
+
+ /* Load the segment registers w/ properly configured
+ * segment descriptors. They will retain these
+ * configurations (limits, writability, etc.) once
+ * protected mode is turned off.
+ */
+ mov $0x30, %ax
+ mov %ax, %ds
+ mov %ax, %es
+ mov %ax, %fs
+ mov %ax, %gs
+ mov %ax, %ss
+
+ /* Turn off protection */
+ movl %cr0, %eax
+ andl $~PE, %eax
+ movl %eax, %cr0
+
+ /* Now really going into real mode */
+ ljmp $0, $RELOCATED(1f)
+1:
+ /* Setup a stack: Put the stack at the end of page zero.
+ * That way we can easily share it between real and
+ * protected, since the 16-bit ESP at segment 0 will
+ * work for any case. */
+ mov $0x0, %ax
+ mov %ax, %ss
+ movl $0x1000, %eax
+ movl %eax, %esp
+
+ /* Load our 16 bit idt */
+ xor %ax, %ax
+ mov %ax, %ds
+ lidt __realmode_idt
+
+ /* Set all segments to 0x0000, ds to 0x0040 */
+ mov %ax, %es
+ mov %ax, %fs
+ mov %ax, %gs
+ mov $0x40, %ax
+ mov %ax, %ds
+ mov %cx, %ax // restore ax
+
+ /* ************************************ */
+ lcall $((VSA2_ENTRY_POINT & 0xffff0000) >> 4), $(VSA2_ENTRY_POINT & 0xffff)
+ /* ************************************ */
+
+ /* If we got here, just about done.
+ * Need to get back to protected mode
+ */
+ movl %cr0, %eax
+ orl $PE, %eax
+ movl %eax, %cr0
+
+ /* Now that we are in protected mode
+ * jump to a 32 bit code segment.
+ */
+ data32 ljmp $0x10, $RELOCATED(1f)
+1:
+ .code32
+ movw $0x18, %ax
+ mov %ax, %ds
+ mov %ax, %es
+ mov %ax, %fs
+ mov %ax, %gs
+ mov %ax, %ss
+
+ /* restore proper idt */
+ lidt idtarg
+
+ /* and exit */
+ mov __stack, %esp
+ popal
+ ret
+#endif
+
.globl __run_interrupt
__run_interrupt = RELOCATED(.)
diff --git a/src/include/cpu/amd/lxdef.h b/src/include/cpu/amd/lxdef.h
index 54dd3a5036..161092248c 100644
--- a/src/include/cpu/amd/lxdef.h
+++ b/src/include/cpu/amd/lxdef.h
@@ -623,6 +623,12 @@
#define SMM_OFFSET 0x80400000 /* above 2GB */
#define SMM_SIZE 128 /* changed SMM_SIZE from 256 KB to 128 KB */
-
+#if !defined(__ROMCC__) && !defined(ASSEMBLY)
+#if defined(__PRE_RAM__)
+void cpuRegInit(void);
+void SystemPreInit(void);
+#endif
+void cpubug(void);
+#endif
#endif
diff --git a/src/mainboard/amd/db800/romstage.c b/src/mainboard/amd/db800/romstage.c
index 210e4e8c10..eeee9ec94e 100644
--- a/src/mainboard/amd/db800/romstage.c
+++ b/src/mainboard/amd/db800/romstage.c
@@ -57,46 +57,14 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-struct msrinit {
- u32 msrnum;
- msr_t msr;
- };
-
-static const struct msrinit msr_table[] =
-{
- {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
- * Rom Properties: Write Serialize, WriteProtect.
- * RomBase: 0xFFFC0
- * SysTop to RomBase Properties: Write Serialize, Cache Disable.
- * SysTop: 0x000A0
- * System Memory Properties: (Write Back) */
- {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
- {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
- {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
-
- /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
- {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
- {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
-};
-
-static void msr_init(void)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(msr_table); i++)
- wrmsr(msr_table[i].msrnum, msr_table[i].msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup. */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -117,6 +85,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/amd/norwich/romstage.c b/src/mainboard/amd/norwich/romstage.c
index d742f50026..e19b8ac257 100644
--- a/src/mainboard/amd/norwich/romstage.c
+++ b/src/mainboard/amd/norwich/romstage.c
@@ -52,46 +52,14 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
-
- /* Setup access to the cache for under 1MB. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x1000A000; /* 0-A0000 write back */
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x0; /* write back */
- msr.lo = 0x0;
- wrmsr(CPU_RCONF_A0_BF, msr);
- wrmsr(CPU_RCONF_C0_DF, msr);
- wrmsr(CPU_RCONF_E0_FF, msr);
-
- /* Setup access to the cache for under 640K. Note MC not setup yet. */
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU0 + 0x21, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU1 + 0x21, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup. */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -116,6 +84,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/artecgroup/dbe61/Kconfig b/src/mainboard/artecgroup/dbe61/Kconfig
index 62470f479c..6803b93756 100644
--- a/src/mainboard/artecgroup/dbe61/Kconfig
+++ b/src/mainboard/artecgroup/dbe61/Kconfig
@@ -31,7 +31,7 @@ config IRQ_SLOT_COUNT
default 3
depends on BOARD_ARTECGROUP_DBE61
-config RAMBASE
- hex
- default 0x4000
- depends on BOARD_ARTECGROUP_DBE61
+#config RAMBASE
+# hex
+# default 0x4000
+## depends on BOARD_ARTECGROUP_DBE61
diff --git a/src/mainboard/artecgroup/dbe61/romstage.c b/src/mainboard/artecgroup/dbe61/romstage.c
index 29120136a6..07fd548722 100644
--- a/src/mainboard/artecgroup/dbe61/romstage.c
+++ b/src/mainboard/artecgroup/dbe61/romstage.c
@@ -45,9 +45,9 @@ static int spd_read_byte(unsigned device, unsigned address)
{
int i;
- if (device == DIMM0){
- for (i=0; i < (ARRAY_SIZE(spd_table)); i++){
- if (spd_table[i].address == address){
+ if (device == DIMM0) {
+ for (i=0; i < (ARRAY_SIZE(spd_table)); i++) {
+ if (spd_table[i].address == address) {
return spd_table[i].data;
}
}
@@ -69,46 +69,14 @@ static int spd_read_byte(unsigned device, unsigned address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-struct msrinit {
- u32 msrnum;
- msr_t msr;
-};
-
-static const struct msrinit msr_table[] =
-{
- {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
- * Rom Properties: Write Serialize, WriteProtect.
- * RomBase: 0xFFFC0
- * SysTop to RomBase Properties: Write Serialize, Cache Disable.
- * SysTop: 0x000A0
- * System Memory Properties: (Write Back) */
- {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
- {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
- {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
-
- /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
- {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
- {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
-};
-
-static void msr_init(void)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(msr_table); i++)
- wrmsr(msr_table[i].msrnum, msr_table[i].msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -137,6 +105,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
@@ -144,8 +115,7 @@ void cache_as_ram_main(void)
sdram_initialize(1, memctrl);
/* Dump memory configuratation */
- /*{
- msr_t msr;
+#if 0
msr = rdmsr(MC_CF07_DATA);
print_debug("MC_CF07_DATA: ");
print_debug_hex32(MC_CF07_DATA);
@@ -173,9 +143,10 @@ void cache_as_ram_main(void)
print_debug_hex32(msr.lo);
msr = rdmsr(MC_CF8F_DATA);
print_debug(" \n");
- }*/
+#endif
/* Check memory. */
- /* ram_check(0x00000000, 640 * 1024); */
+ // ram_check(0x00000000, 640 * 1024);
+ // ram_check(1024 * 1024, 2 * 1024 * 1024);
}
diff --git a/src/mainboard/digitallogic/msm800sev/romstage.c b/src/mainboard/digitallogic/msm800sev/romstage.c
index be696d97d4..4598e89ad9 100644
--- a/src/mainboard/digitallogic/msm800sev/romstage.c
+++ b/src/mainboard/digitallogic/msm800sev/romstage.c
@@ -35,30 +35,14 @@ static inline int spd_read_byte(unsigned device, unsigned address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
- /* Setup access to the MC for under 1MB. Note MC not setup yet. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x10010000;
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff00;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff00;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -81,6 +65,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
index f5fa9e9b0a..32ffda24d8 100644
--- a/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
+++ b/src/mainboard/iei/pcisa-lx-800-r10/romstage.c
@@ -60,46 +60,14 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
-
- /* Setup access to the cache for under 1MB. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x1000A000; /* 0-A0000 write back */
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x0; /* Write back */
- msr.lo = 0x0;
- wrmsr(CPU_RCONF_A0_BF, msr);
- wrmsr(CPU_RCONF_C0_DF, msr);
- wrmsr(CPU_RCONF_E0_FF, msr);
-
- /* Setup access to the cache for under 640K. Note MC not setup yet. */
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU0 + 0x21, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU1 + 0x21, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup. */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -120,6 +88,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/lippert/roadrunner-lx/romstage.c b/src/mainboard/lippert/roadrunner-lx/romstage.c
index efaf1dd6be..8aedd6380e 100644
--- a/src/mainboard/lippert/roadrunner-lx/romstage.c
+++ b/src/mainboard/lippert/roadrunner-lx/romstage.c
@@ -60,39 +60,7 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
-
- /* Setup access to the cache for under 1MB. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x1000A000; /* 0-A0000 write back */
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x0; /* Write back */
- msr.lo = 0x0;
- wrmsr(CPU_RCONF_A0_BF, msr);
- wrmsr(CPU_RCONF_C0_DF, msr);
- wrmsr(CPU_RCONF_E0_FF, msr);
-
- /* Setup access to the cache for under 640K. Note MC not setup yet. */
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU0 + 0x21, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU1 + 0x21, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static const u16 sio_init_table[] = { // hi=data, lo=index
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
@@ -128,7 +96,7 @@ static void mb_gpio_init(void)
it8712f_exit_conf();
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -150,6 +118,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/lippert/spacerunner-lx/romstage.c b/src/mainboard/lippert/spacerunner-lx/romstage.c
index 51b1cf6d1d..5354c2b5d7 100644
--- a/src/mainboard/lippert/spacerunner-lx/romstage.c
+++ b/src/mainboard/lippert/spacerunner-lx/romstage.c
@@ -122,39 +122,7 @@ static int smc_send_config(unsigned char config_data)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
-
- /* Setup access to the cache for under 1MB. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x1000A000; /* 0-A0000 write back */
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x0; /* Write back */
- msr.lo = 0x0;
- wrmsr(CPU_RCONF_A0_BF, msr);
- wrmsr(CPU_RCONF_C0_DF, msr);
- wrmsr(CPU_RCONF_E0_FF, msr);
-
- /* Setup access to the cache for under 640K. Note MC not setup yet. */
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU0 + 0x21, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff80;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0x80fffe0;
- wrmsr(MSR_GLIU1 + 0x21, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static const u16 sio_init_table[] = { // hi=data, lo=index
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
@@ -189,7 +157,7 @@ static void mb_gpio_init(void)
it8712f_exit_conf();
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
int err;
post_code(0x01);
@@ -212,6 +180,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/pcengines/alix1c/romstage.c b/src/mainboard/pcengines/alix1c/romstage.c
index c4a9cc98e5..a9b6db5a6c 100644
--- a/src/mainboard/pcengines/alix1c/romstage.c
+++ b/src/mainboard/pcengines/alix1c/romstage.c
@@ -115,31 +115,14 @@ static u8 spd_read_byte(u8 device, u8 address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-static void msr_init(void)
-{
- msr_t msr;
-
- /* Setup access to the MC for under 1MB. Note MC not setup yet. */
- msr.hi = 0x24fffc02;
- msr.lo = 0x10010000;
- wrmsr(CPU_RCONF_DEFAULT, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff00;
- wrmsr(MSR_GLIU0 + 0x20, msr);
-
- msr.hi = 0x20000000;
- msr.lo = 0xfff00;
- wrmsr(MSR_GLIU1 + 0x20, msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
/** Early mainboard specific GPIO setup. */
static void mb_gpio_init(void)
{
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
static const struct mem_controller memctrl[] = {
{.channel0 = {0x50}},
@@ -161,6 +144,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/mainboard/winent/pl6064/romstage.c b/src/mainboard/winent/pl6064/romstage.c
index 60f2d21093..aa63ab4062 100644
--- a/src/mainboard/winent/pl6064/romstage.c
+++ b/src/mainboard/winent/pl6064/romstage.c
@@ -57,46 +57,14 @@ static inline int spd_read_byte(unsigned int device, unsigned int address)
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
-
-struct msrinit {
- u32 msrnum;
- msr_t msr;
- };
-
-static const struct msrinit msr_table[] =
-{
- {CPU_RCONF_DEFAULT, {.hi = 0x24fffc02,.lo = 0x1000A000}}, /* Setup access to cache under 1MB.
- * Rom Properties: Write Serialize, WriteProtect.
- * RomBase: 0xFFFC0
- * SysTop to RomBase Properties: Write Serialize, Cache Disable.
- * SysTop: 0x000A0
- * System Memory Properties: (Write Back) */
- {CPU_RCONF_A0_BF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xA0000-0xBFFFF : (Write Back) */
- {CPU_RCONF_C0_DF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xC0000-0xDFFFF : (Write Back) */
- {CPU_RCONF_E0_FF, {.hi = 0x00000000,.lo = 0x00000000}}, /* 0xE0000-0xFFFFF : (Write Back) */
-
- /* Setup access to memory under 1MB. Note: VGA hole at 0xA0000-0xBFFFF */
- {MSR_GLIU0_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU0_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU0_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
- {MSR_GLIU1_BASE1, {.hi = 0x20000000,.lo = 0x000fff80}}, // 0x00000-0x7FFFF
- {MSR_GLIU1_BASE2, {.hi = 0x20000000,.lo = 0x080fffe0}}, // 0x80000-0x9FFFF
- {MSR_GLIU1_SHADOW, {.hi = 0x2000FFFF,.lo = 0xFFFF0003}}, // 0xC0000-0xFFFFF
-};
-
-static void msr_init(void)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(msr_table); i++)
- wrmsr(msr_table[i].msrnum, msr_table[i].msr);
-}
+#include "cpu/amd/model_lx/msrinit.c"
static void mb_gpio_init(void)
{
/* Early mainboard specific GPIO setup. */
}
-void cache_as_ram_main(void)
+void main(unsigned long bist)
{
post_code(0x01);
@@ -118,6 +86,9 @@ void cache_as_ram_main(void)
uart_init();
console_init();
+ /* Halt if there was a built in self test failure */
+ report_bist_failure(bist);
+
pll_reset(ManualConf);
cpuRegInit();
diff --git a/src/northbridge/amd/gx2/Kconfig b/src/northbridge/amd/gx2/Kconfig
index 3dc5b9a56c..4fa7ea6543 100644
--- a/src/northbridge/amd/gx2/Kconfig
+++ b/src/northbridge/amd/gx2/Kconfig
@@ -19,4 +19,6 @@
config NORTHBRIDGE_AMD_GX2
bool
+ # for VSM:
+ select PCI_OPTION_ROM_RUN_REALMODE
diff --git a/src/northbridge/amd/lx/Kconfig b/src/northbridge/amd/lx/Kconfig
index 75a93a148d..b6fd816d2e 100644
--- a/src/northbridge/amd/lx/Kconfig
+++ b/src/northbridge/amd/lx/Kconfig
@@ -1,6 +1,8 @@
config NORTHBRIDGE_AMD_LX
bool
select HAVE_HIGH_TABLES
+ # for VSM:
+ select PCI_OPTION_ROM_RUN_REALMODE
config VIDEO_MB
int
diff --git a/src/northbridge/amd/lx/northbridge.c b/src/northbridge/amd/lx/northbridge.c
index 137f7a9d09..4dd29d134f 100644
--- a/src/northbridge/amd/lx/northbridge.c
+++ b/src/northbridge/amd/lx/northbridge.c
@@ -74,11 +74,8 @@
#define IOD_BM(msr, pdid1, bizarro, ibase, imask) {msr, {.hi=(pdid1<<29)|(bizarro<<28)|(ibase>>12), .lo=(ibase<<20)|imask}}
#define IOD_SC(msr, pdid1, bizarro, en, wen, ren, ibase) {msr, {.hi=(pdid1<<29)|(bizarro<<28), .lo=(en<<24)|(wen<<21)|(ren<<20)|(ibase<<3)}}
-extern void graphics_init(void);
-extern void cpubug(void);
-extern void chipsetinit(void);
-
-void setup_realmode_idt(void);
+void print_conf(void);
+void graphics_init(void);
void do_vsmbios(void);
struct msr_defaults {
@@ -319,7 +316,7 @@ static void northbridge_init(device_t dev)
//printk(BIOS_DEBUG, "MSR 0x%08X is now 0x%08X:0x%08X\n", MSR_GLIU1_SHADOW, msr.hi, msr.lo);
}
-void northbridge_set_resources(struct device *dev)
+static void northbridge_set_resources(struct device *dev)
{
struct resource *resource, *last;
unsigned link;
@@ -426,7 +423,6 @@ static void pci_domain_set_resources(device_t dev)
static void pci_domain_enable(device_t dev)
{
-
printk(BIOS_SPEW, ">> Entering northbridge.c: %s\n", __func__);
// do this here for now -- this chip really breaks our device model
@@ -434,14 +430,10 @@ static void pci_domain_enable(device_t dev)
cpubug();
chipsetinit();
- setup_realmode_idt();
-
- printk(BIOS_DEBUG, "Before VSA:\n");
// print_conf();
do_vsmbios(); // do the magic stuff here, so prepare your tambourine ;)
- printk(BIOS_DEBUG, "After VSA:\n");
// print_conf();
graphics_init();
diff --git a/src/southbridge/amd/cs5536/cs5536.h b/src/southbridge/amd/cs5536/cs5536.h
index a00709a4a9..073bb3ea59 100644
--- a/src/southbridge/amd/cs5536/cs5536.h
+++ b/src/southbridge/amd/cs5536/cs5536.h
@@ -464,4 +464,13 @@
#define FLASH_IO_128B 0x0000FF80
#define FLASH_IO_256B 0x0000FF00
+#if !defined(ASSEMBLY) && !defined(__ROMCC__)
+#if defined(__PRE_RAM__)
+void cs5536_setup_onchipuart(int uart);
+void cs5536_disable_internal_uart(void);
+#else
+void chipsetinit(void);
+#endif
+#endif
+
#endif /* _CS5536_H */
diff --git a/src/southbridge/amd/cs5536/cs5536_early_setup.c b/src/southbridge/amd/cs5536/cs5536_early_setup.c
index cedc209c56..452e530f41 100644
--- a/src/southbridge/amd/cs5536/cs5536_early_setup.c
+++ b/src/southbridge/amd/cs5536/cs5536_early_setup.c
@@ -121,7 +121,7 @@ static void cs5536_setup_gpio(void)
outl(val, GPIO_IO_BASE + GPIOL_INPUT_ENABLE);
}
-static void cs5536_disable_internal_uart(void)
+void cs5536_disable_internal_uart(void)
{
msr_t msr;
/* The UARTs default to enabled.