summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorKyösti Mälkki <kyosti.malkki@gmail.com>2014-02-13 17:16:22 +0200
committerPatrick Georgi <patrick@georgi-clan.de>2014-04-09 11:24:43 +0200
commitafa7b13b9355b3df3da7606d434cb8b450316ab9 (patch)
tree6f6a712a477b2be52f353eb2e7db69c587914325
parentbbf6f3d384caf25efdfeca0fc5eaac13319a6a43 (diff)
downloadcoreboot-afa7b13b9355b3df3da7606d434cb8b450316ab9.tar.xz
uart: Redefine Kconfig options
Option DRIVERS_UART builds with support for UART hardware. Option CONSOLE_SERIAL enables the console output for UART. Those x86 boards that do not have serial port on SuperIO should select NO_UART_ON_SUPERIO to disable 8250 UART for the default configuration. Removes: CONSOLE_SERIAL_UART HAVE_UART_IO_MAPPED HAVE_UART_MEMORY_MAPPED Renames: CONSOLE_SERIAL8250 -> DRIVERS_UART_8250IO CONSOLE_SERIAL8250MEM -> DRIVERS_UART_8250MEM Change-Id: Id3afa05f85c0d6849746886db8b6c2ed6c846b61 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5311 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
-rw-r--r--src/arch/armv7/early_console.c4
-rw-r--r--src/arch/x86/lib/romcc_console.c6
-rw-r--r--src/arch/x86/lib/romstage_console.c10
-rw-r--r--src/console/Kconfig43
-rw-r--r--src/console/uart_console.c2
-rw-r--r--src/cpu/allwinner/a10/Kconfig2
-rw-r--r--src/cpu/allwinner/a10/Makefile.inc12
-rw-r--r--src/cpu/samsung/exynos5250/Kconfig4
-rw-r--r--src/cpu/samsung/exynos5250/Makefile.inc6
-rw-r--r--src/cpu/samsung/exynos5420/Kconfig4
-rw-r--r--src/cpu/samsung/exynos5420/Makefile.inc6
-rw-r--r--src/cpu/ti/am335x/Makefile.inc7
-rw-r--r--src/cpu/x86/smm/smiutil.c10
-rw-r--r--src/drivers/Makefile.inc2
-rw-r--r--src/drivers/oxford/oxpcie/Kconfig2
-rw-r--r--src/drivers/oxford/oxpcie/Makefile.inc2
-rw-r--r--src/drivers/uart/Kconfig15
-rw-r--r--src/drivers/uart/Makefile.inc13
-rw-r--r--src/lib/coreboot_table.c2
-rw-r--r--src/mainboard/emulation/qemu-armv7/Kconfig2
-rw-r--r--src/mainboard/samsung/lumpy/romstage.c4
-rw-r--r--src/mainboard/samsung/stumpy/romstage.c4
-rw-r--r--src/mainboard/ti/beaglebone/Kconfig4
-rw-r--r--src/superio/via/vt1211/vt1211.c2
24 files changed, 79 insertions, 89 deletions
diff --git a/src/arch/armv7/early_console.c b/src/arch/armv7/early_console.c
index 93ea38d43a..7614531c71 100644
--- a/src/arch/armv7/early_console.c
+++ b/src/arch/armv7/early_console.c
@@ -28,7 +28,7 @@ void console_tx_byte(unsigned char byte)
if (byte == '\n')
console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL_UART
+#if CONFIG_CONSOLE_SERIAL
uart_tx_byte(byte);
#endif
#if CONFIG_CONSOLE_CBMEM && !defined(__BOOT_BLOCK__)
@@ -38,7 +38,7 @@ void console_tx_byte(unsigned char byte)
static void _console_tx_flush(void)
{
-#if CONFIG_CONSOLE_SERIAL_UART
+#if CONFIG_CONSOLE_SERIAL
uart_tx_flush();
#endif
}
diff --git a/src/arch/x86/lib/romcc_console.c b/src/arch/x86/lib/romcc_console.c
index 66c81db36f..4bd3ad474f 100644
--- a/src/arch/x86/lib/romcc_console.c
+++ b/src/arch/x86/lib/romcc_console.c
@@ -30,7 +30,7 @@
*/
#define console_loglevel CONFIG_DEFAULT_CONSOLE_LOGLEVEL
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL && CONFIG_DRIVERS_UART_8250IO
#include "drivers/uart/util.c"
#include "drivers/uart/uart8250io.c"
#endif
@@ -40,7 +40,7 @@
static void __console_tx_byte(unsigned char byte)
{
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL
uart_tx_byte(byte);
#endif
#if CONFIG_CONSOLE_NE2K
@@ -61,7 +61,7 @@ static void __console_tx_nibble(unsigned nibble)
static void __console_tx_char(int loglevel, unsigned char byte)
{
if (console_loglevel >= loglevel) {
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL
uart_tx_byte(byte);
#endif
#if CONFIG_CONSOLE_NE2K
diff --git a/src/arch/x86/lib/romstage_console.c b/src/arch/x86/lib/romstage_console.c
index 5e7923e64f..0337245ee7 100644
--- a/src/arch/x86/lib/romstage_console.c
+++ b/src/arch/x86/lib/romstage_console.c
@@ -31,10 +31,7 @@ void console_tx_byte(unsigned char byte)
if (byte == '\n')
console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL8250MEM
- uart_tx_byte(byte);
-#endif
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL
uart_tx_byte(byte);
#endif
#if CONFIG_CONSOLE_USB && (CONFIG_USBDEBUG_IN_ROMSTAGE || !defined(__PRE_RAM__))
@@ -53,10 +50,7 @@ void console_tx_byte(unsigned char byte)
void console_tx_flush(void)
{
-#if CONFIG_CONSOLE_SERIAL8250MEM
- uart_tx_flush();
-#endif
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL
uart_tx_flush();
#endif
#if CONFIG_CONSOLE_NE2K
diff --git a/src/console/Kconfig b/src/console/Kconfig
index d77bb9e4c7..65fc1aaa48 100644
--- a/src/console/Kconfig
+++ b/src/console/Kconfig
@@ -29,37 +29,29 @@ config SQUELCH_EARLY_SMP
config CONSOLE_SERIAL
bool "Serial port console output"
default y
+ depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM || HAVE_UART_SPECIAL
help
- Send coreboot debug output to a serial port (should be one or more of
- CONSOLE_SERIAL8250, CONSOLE_SERIAL8250MEM, CONSOLE_SERIAL_UART)
+ Send coreboot debug output to a serial port.
-config CONSOLE_SERIAL8250
- bool "Serial port console output (I/O mapped, 8250-compatible)"
- depends on CONSOLE_SERIAL
- depends on HAVE_UART_IO_MAPPED
- default y
- help
- Send coreboot debug output to an I/O mapped serial port console.
+ The type of serial port driver selected based on your configuration is
+ shown on the following menu line. Supporting multiple different types
+ of UARTs in one build is not supported.
-config CONSOLE_SERIAL8250MEM
- bool "Serial port console output (memory mapped, 8250-compatible)"
- depends on CONSOLE_SERIAL
- depends on HAVE_UART_MEMORY_MAPPED
- help
- Send coreboot debug output to a memory mapped serial port console.
+if CONSOLE_SERIAL
+
+ comment "I/O mapped, 8250-compatible"
+ depends on DRIVERS_UART_8250IO
-config CONSOLE_SERIAL_UART
- bool "Serial port console output (device-specific UART)"
- depends on CONSOLE_SERIAL
+ comment "memory mapped, 8250-compatible"
+ depends on DRIVERS_UART_8250MEM
+
+ comment "device-specific UART"
depends on HAVE_UART_SPECIAL
- default y
- help
- Send coreboot debug output to a device-specific serial port console.
choice
prompt "Serial port for 8250"
default CONSOLE_SERIAL_COM1
- depends on CONSOLE_SERIAL8250
+ depends on DRIVERS_UART_8250IO
config CONSOLE_SERIAL_COM1
bool "COM1/ttyS0, I/O port 0x3f8"
@@ -82,7 +74,7 @@ endchoice
config TTYS0_BASE
hex
- depends on CONSOLE_SERIAL8250
+ depends on DRIVERS_UART_8250IO
default 0x3f8 if CONSOLE_SERIAL_COM1
default 0x2f8 if CONSOLE_SERIAL_COM2
default 0x3e8 if CONSOLE_SERIAL_COM3
@@ -93,7 +85,6 @@ config TTYS0_BASE
choice
prompt "Baud rate"
default CONSOLE_SERIAL_115200
- depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_115200
bool "115200"
@@ -133,7 +124,9 @@ config TTYS0_BAUD
config TTYS0_LCS
int
default 3
- depends on CONSOLE_SERIAL8250 || CONSOLE_SERIAL8250MEM
+ depends on DRIVERS_UART_8250IO || DRIVERS_UART_8250MEM
+
+endif # CONSOLE_SERIAL
config SPKMODEM
bool "spkmodem (console on speaker) console output"
diff --git a/src/console/uart_console.c b/src/console/uart_console.c
index e2cd6a8b81..f5535d72b8 100644
--- a/src/console/uart_console.c
+++ b/src/console/uart_console.c
@@ -43,7 +43,7 @@ static unsigned char uartmem_rx_byte(void)
/* This only relevant with x86 with GDB_STUB enabled.*/
static int uartmem_tst_byte(void)
{
-#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM
+#if CONFIG_DRIVERS_UART_8250IO || CONFIG_DRIVERS_UART_8250MEM
return uart_can_rx_byte();
#else
return 0;
diff --git a/src/cpu/allwinner/a10/Kconfig b/src/cpu/allwinner/a10/Kconfig
index 72e363009e..8512c38511 100644
--- a/src/cpu/allwinner/a10/Kconfig
+++ b/src/cpu/allwinner/a10/Kconfig
@@ -76,7 +76,7 @@ config SYS_SDRAM_BASE
choice CONSOLE_SERIAL_UART_CHOICES
prompt "Serial Console UART"
default CONSOLE_SERIAL_UART0
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0
bool "UART0"
diff --git a/src/cpu/allwinner/a10/Makefile.inc b/src/cpu/allwinner/a10/Makefile.inc
index a86d71931c..716e463e39 100644
--- a/src/cpu/allwinner/a10/Makefile.inc
+++ b/src/cpu/allwinner/a10/Makefile.inc
@@ -4,8 +4,6 @@ bootblock-y += gpio.c
bootblock-y += pinmux.c
bootblock-y += raminit.c
bootblock-y += timer.c
-bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c
-bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart_console.c
romstage-y += bootblock_media.c
romstage-y += cbmem.c
@@ -13,8 +11,6 @@ romstage-y += clock.c
romstage-y += pinmux.c
romstage-y += timer.c
romstage-y += twi.c
-romstage-y += uart.c
-romstage-y += uart_console.c
ramstage-y += bootblock_media.c
ramstage-y += cbmem.c
@@ -23,8 +19,12 @@ ramstage-y += cpu.c
ramstage-y += monotonic_timer.c
ramstage-y += timer.c
ramstage-y += twi.c
-ramstage-y += uart.c
-ramstage-y += uart_console.c
+
+ifeq ($(CONFIG_DRIVERS_UART),y)
+bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c uart_console.c
+romstage-y += uart.c uart_console.c
+ramstage-y += uart.c uart_console.c
+endif
real-target: $(obj)/BOOT0
diff --git a/src/cpu/samsung/exynos5250/Kconfig b/src/cpu/samsung/exynos5250/Kconfig
index 63038c3ecb..9320184bed 100644
--- a/src/cpu/samsung/exynos5250/Kconfig
+++ b/src/cpu/samsung/exynos5250/Kconfig
@@ -91,7 +91,7 @@ config SYS_SDRAM_BASE
choice CONSOLE_SERIAL_UART_CHOICES
prompt "Serial Console UART"
default CONSOLE_SERIAL_UART3
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0
bool "UART0"
@@ -117,7 +117,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS
hex
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
default 0x12c00000 if CONSOLE_SERIAL_UART0
default 0x12c10000 if CONSOLE_SERIAL_UART1
default 0x12c20000 if CONSOLE_SERIAL_UART2
diff --git a/src/cpu/samsung/exynos5250/Makefile.inc b/src/cpu/samsung/exynos5250/Makefile.inc
index 6d7ae16c72..3d5b5b4bf7 100644
--- a/src/cpu/samsung/exynos5250/Makefile.inc
+++ b/src/cpu/samsung/exynos5250/Makefile.inc
@@ -9,7 +9,7 @@ bootblock-y += pinmux.c mct.c power.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock_init.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += monotonic_timer.c
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
+ifeq ($(CONFIG_DRIVERS_UART),y)
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c
endif
bootblock-y += wakeup.c
@@ -25,7 +25,7 @@ romstage-y += dmc_init_ddr3.c
romstage-y += power.c
romstage-y += mct.c
romstage-y += monotonic_timer.c
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
+ifeq ($(CONFIG_DRIVERS_UART),y)
romstage-$(CONFIG_EARLY_CONSOLE) += uart.c
endif
romstage-y += wakeup.c
@@ -40,7 +40,7 @@ ramstage-y += clock.c
ramstage-y += clock_init.c
ramstage-y += pinmux.c
ramstage-y += power.c
-ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c
+ramstage-$(CONFIG_DRIVERS_UART) += uart.c
ramstage-y += cpu.c
ramstage-y += tmu.c
ramstage-y += mct.c
diff --git a/src/cpu/samsung/exynos5420/Kconfig b/src/cpu/samsung/exynos5420/Kconfig
index dd35c356e4..5f78cc5d92 100644
--- a/src/cpu/samsung/exynos5420/Kconfig
+++ b/src/cpu/samsung/exynos5420/Kconfig
@@ -93,7 +93,7 @@ config SYS_SDRAM_BASE
choice CONSOLE_SERIAL_UART_CHOICES
prompt "Serial Console UART"
default CONSOLE_SERIAL_UART3
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0
bool "UART0"
@@ -119,7 +119,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS
hex
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
default 0x12c00000 if CONSOLE_SERIAL_UART0
default 0x12c10000 if CONSOLE_SERIAL_UART1
default 0x12c20000 if CONSOLE_SERIAL_UART2
diff --git a/src/cpu/samsung/exynos5420/Makefile.inc b/src/cpu/samsung/exynos5420/Makefile.inc
index 4169a2efac..844b8353c5 100644
--- a/src/cpu/samsung/exynos5420/Makefile.inc
+++ b/src/cpu/samsung/exynos5420/Makefile.inc
@@ -9,7 +9,7 @@ bootblock-y += pinmux.c mct.c power.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock_init.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += clock.c
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += monotonic_timer.c
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
+ifeq ($(CONFIG_DRIVERS_UART),y)
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c
endif
bootblock-y += wakeup.c
@@ -25,7 +25,7 @@ romstage-y += dmc_init_ddr3.c
romstage-y += power.c
romstage-y += mct.c
romstage-y += monotonic_timer.c
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
+ifeq ($(CONFIG_DRIVERS_UART),y)
romstage-$(CONFIG_EARLY_CONSOLE) += uart.c
endif
romstage-y += wakeup.c
@@ -40,7 +40,7 @@ ramstage-y += clock.c
ramstage-y += clock_init.c
ramstage-y += pinmux.c
ramstage-y += power.c
-ramstage-$(CONFIG_CONSOLE_SERIAL_UART) += uart.c
+ramstage-$(CONFIG_DRIVERS_UART) += uart.c
ramstage-y += cpu.c
ramstage-y += tmu.c
ramstage-y += mct.c
diff --git a/src/cpu/ti/am335x/Makefile.inc b/src/cpu/ti/am335x/Makefile.inc
index ff007334a6..5b10bd8d77 100644
--- a/src/cpu/ti/am335x/Makefile.inc
+++ b/src/cpu/ti/am335x/Makefile.inc
@@ -1,16 +1,19 @@
bootblock-y += dmtimer.c
bootblock-y += bootblock_media.c
bootblock-y += pinmux.c
-bootblock-$(CONFIG_EARLY_CONSOLE) += uart.c
romstage-y += nand.c
-romstage-y += uart.c
ramstage-y += dmtimer.c
ramstage-y += monotonic_timer.c
ramstage-y += nand.c
ramstage-y += timer.c
+
+ifeq ($(CONFIG_DRIVERS_UART),y)
+bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += uart.c
+romstage-y += uart.c
ramstage-y += uart.c
+endif
$(call add-class,omap-header)
diff --git a/src/cpu/x86/smm/smiutil.c b/src/cpu/x86/smm/smiutil.c
index 3325c328c9..6e9822e091 100644
--- a/src/cpu/x86/smm/smiutil.c
+++ b/src/cpu/x86/smm/smiutil.c
@@ -32,10 +32,7 @@ void console_tx_byte(unsigned char byte)
if (byte == '\n')
console_tx_byte('\r');
-#if CONFIG_CONSOLE_SERIAL8250MEM
- uart_tx_byte(byte);
-#endif
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL
uart_tx_byte(byte);
#endif
}
@@ -45,10 +42,7 @@ void console_init(void)
{
#if CONFIG_DEBUG_SMI
console_loglevel = CONFIG_DEFAULT_CONSOLE_LOGLEVEL;
-#if CONFIG_CONSOLE_SERIAL8250
- uart_init();
-#endif
-#if CONFIG_CONSOLE_SERIAL8250MEM
+#if CONFIG_CONSOLE_SERIAL
uart_init();
#endif
#endif
diff --git a/src/drivers/Makefile.inc b/src/drivers/Makefile.inc
index 197a900b05..148e257b5d 100644
--- a/src/drivers/Makefile.inc
+++ b/src/drivers/Makefile.inc
@@ -30,7 +30,7 @@ subdirs-y += parade
subdirs-y += realtek
subdirs-y += sil
subdirs-y += trident
-subdirs-y += uart
+subdirs-$(CONFIG_DRIVERS_UART) += uart
subdirs-y += usb
subdirs-y += ics
subdirs-y += spi
diff --git a/src/drivers/oxford/oxpcie/Kconfig b/src/drivers/oxford/oxpcie/Kconfig
index 899a1533b7..5ad42aafb7 100644
--- a/src/drivers/oxford/oxpcie/Kconfig
+++ b/src/drivers/oxford/oxpcie/Kconfig
@@ -1,7 +1,7 @@
config DRIVERS_OXFORD_OXPCIE
bool "Oxford OXPCIe952"
default n
- select HAVE_UART_MEMORY_MAPPED
+ select DRIVERS_UART_8250MEM
help
Support for Oxford OXPCIe952 serial port PCIe cards.
Currently only devices with the vendor ID 0x1415 and device ID
diff --git a/src/drivers/oxford/oxpcie/Makefile.inc b/src/drivers/oxford/oxpcie/Makefile.inc
index 1922425fd9..5e3e6e5728 100644
--- a/src/drivers/oxford/oxpcie/Makefile.inc
+++ b/src/drivers/oxford/oxpcie/Makefile.inc
@@ -1,4 +1,4 @@
-ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y)
+ifeq ($(CONFIG_CONSOLE_SERIAL),y)
ramstage-y += oxpcie_early.c oxpcie.c
romstage-y += oxpcie_early.c
endif
diff --git a/src/drivers/uart/Kconfig b/src/drivers/uart/Kconfig
index 5c9a9d129c..889c69a0bc 100644
--- a/src/drivers/uart/Kconfig
+++ b/src/drivers/uart/Kconfig
@@ -1,10 +1,19 @@
-# This should default to N and be set by SuperI/O drivers that have an UART
-config HAVE_UART_IO_MAPPED
+config DRIVERS_UART
bool
+ default y if CONSOLE_SERIAL
+ default n
+
+config DRIVERS_UART_8250IO
+ bool "Serial port on SuperIO"
depends on !ARCH_ARMV7
+ default n if NO_UART_ON_SUPERIO
default y if ARCH_X86
-config HAVE_UART_MEMORY_MAPPED
+# Select this for mainboard without SuperIO serial port.
+config NO_UART_ON_SUPERIO
+ def_bool n
+
+config DRIVERS_UART_8250MEM
bool
default n
diff --git a/src/drivers/uart/Makefile.inc b/src/drivers/uart/Makefile.inc
index 415c5bb095..286bff2112 100644
--- a/src/drivers/uart/Makefile.inc
+++ b/src/drivers/uart/Makefile.inc
@@ -1,28 +1,25 @@
-ifeq ($(CONFIG_CONSOLE_SERIAL),y)
romstage-y += util.c
ramstage-y += util.c
bootblock-y += util.c
smm-$(CONFIG_DEBUG_SMI) += util.c
-endif
-ifeq ($(CONFIG_CONSOLE_SERIAL8250),y)
+# Add the driver, only one can be enabled. The driver files may
+# be located in the soc/ or cpu/ directories instead of here.
+
+ifeq ($(CONFIG_DRIVERS_UART_8250IO),y)
romstage-y += uart8250io.c
ramstage-y += uart8250io.c
smm-$(CONFIG_DEBUG_SMI) += uart8250io.c
endif
-ifeq ($(CONFIG_CONSOLE_SERIAL8250MEM),y)
+ifeq ($(CONFIG_DRIVERS_UART_8250MEM),y)
romstage-y += uart8250mem.c
ramstage-y += uart8250mem.c
smm-$(CONFIG_DEBUG_SMI) += uart8250mem.c
endif
-ifeq ($(CONFIG_CONSOLE_SERIAL_UART),y)
-
ifeq ($(CONFIG_DRIVERS_UART_PL011),y)
bootblock-$(CONFIG_BOOTBLOCK_CONSOLE) += pl011.c
romstage-$(CONFIG_EARLY_CONSOLE) += pl011.c
ramstage-y += pl011.c
endif
-
-endif
diff --git a/src/lib/coreboot_table.c b/src/lib/coreboot_table.c
index e4554d7b94..8e7f85d353 100644
--- a/src/lib/coreboot_table.c
+++ b/src/lib/coreboot_table.c
@@ -390,7 +390,7 @@ unsigned long write_coreboot_table(
lb_mainboard(head);
/* Record the serial ports and consoles */
-#if CONFIG_CONSOLE_SERIAL8250 || CONFIG_CONSOLE_SERIAL8250MEM || CONFIG_CONSOLE_SERIAL_UART
+#if CONFIG_CONSOLE_SERIAL
uart_fill_lb(head);
#endif
#if CONFIG_CONSOLE_USB
diff --git a/src/mainboard/emulation/qemu-armv7/Kconfig b/src/mainboard/emulation/qemu-armv7/Kconfig
index edba627984..040ed9cb4b 100644
--- a/src/mainboard/emulation/qemu-armv7/Kconfig
+++ b/src/mainboard/emulation/qemu-armv7/Kconfig
@@ -50,7 +50,7 @@ config DRAM_SIZE_MB
config CONSOLE_SERIAL_UART_ADDRESS
hex
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
default 0x10009000
# Memory map for qemu vexpress-a9:
diff --git a/src/mainboard/samsung/lumpy/romstage.c b/src/mainboard/samsung/lumpy/romstage.c
index 993345958d..55c1f0a21f 100644
--- a/src/mainboard/samsung/lumpy/romstage.c
+++ b/src/mainboard/samsung/lumpy/romstage.c
@@ -40,7 +40,7 @@
#include <cpu/x86/msr.h>
#include "option_table.h"
#include "gpio.h"
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_DRIVERS_UART_8250IO
#include "superio/smsc/lpc47n207/lpc47n207.h"
#include "superio/smsc/lpc47n207/early_serial.c"
#endif
@@ -53,7 +53,7 @@ static void pch_enable_lpc(void)
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_DRIVERS_UART_8250IO
/* Enable SuperIO + EC + KBC + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | MC_LPC_EN |
KBC_LPC_EN | CNF2_LPC_EN | COMA_LPC_EN);
diff --git a/src/mainboard/samsung/stumpy/romstage.c b/src/mainboard/samsung/stumpy/romstage.c
index e5b55b5059..3e27a6adfb 100644
--- a/src/mainboard/samsung/stumpy/romstage.c
+++ b/src/mainboard/samsung/stumpy/romstage.c
@@ -40,7 +40,7 @@
#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include "gpio.h"
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_DRIVERS_UART_8250IO
#include "superio/smsc/lpc47n207/lpc47n207.h"
#include "superio/smsc/lpc47n207/early_serial.c"
#endif
@@ -62,7 +62,7 @@ static void pch_enable_lpc(void)
/* Set COM1/COM2 decode range */
pci_write_config16(PCH_LPC_DEV, LPC_IO_DEC, 0x0010);
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_DRIVERS_UART_8250IO
/* Enable SuperIO + PS/2 Keyboard/Mouse + COM1 + lpc47n207 config*/
pci_write_config16(PCH_LPC_DEV, LPC_EN, CNF1_LPC_EN | KBC_LPC_EN |\
CNF2_LPC_EN | COMA_LPC_EN);
diff --git a/src/mainboard/ti/beaglebone/Kconfig b/src/mainboard/ti/beaglebone/Kconfig
index df7ebeb5b3..c842a5d59a 100644
--- a/src/mainboard/ti/beaglebone/Kconfig
+++ b/src/mainboard/ti/beaglebone/Kconfig
@@ -64,7 +64,7 @@ config CBFS_HEADER_ROM_OFFSET
choice CONSOLE_SERIAL_UART_CHOICES
prompt "Serial Console UART"
default CONSOLE_SERIAL_UART0
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
config CONSOLE_SERIAL_UART0
bool "UART0"
@@ -100,7 +100,7 @@ endchoice
config CONSOLE_SERIAL_UART_ADDRESS
hex
- depends on CONSOLE_SERIAL_UART
+ depends on CONSOLE_SERIAL
default 0x44e09000 if CONSOLE_SERIAL_UART0
default 0x48022000 if CONSOLE_SERIAL_UART1
default 0x48024000 if CONSOLE_SERIAL_UART2
diff --git a/src/superio/via/vt1211/vt1211.c b/src/superio/via/vt1211/vt1211.c
index 551f6f02c7..f7a5cd9d13 100644
--- a/src/superio/via/vt1211/vt1211.c
+++ b/src/superio/via/vt1211/vt1211.c
@@ -117,7 +117,7 @@ static void vt1211_pnp_set_resources(struct device *dev)
{
struct resource *res;
-#if CONFIG_CONSOLE_SERIAL8250
+#if CONFIG_CONSOLE_SERIAL && CONFIG_DRIVERS_UART_8250IO
/* TODO: Do the same for SP2? */
if (dev->path.pnp.device == VT1211_SP1) {
for (res = dev->resource_list; res; res = res->next) {