summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorFurquan Shaikh <furquan@google.com>2021-04-11 12:06:26 -0700
committerPatrick Georgi <pgeorgi@google.com>2021-04-18 20:41:04 +0000
commite206e2e7ff91ec9ebe7789eab37510874de9edf4 (patch)
tree67b2f3643682c919f5e5c4b7a0f2505aa1b5ce92
parente79431288209f239600874b8f0c45a9490fa0ed6 (diff)
downloadcoreboot-e206e2e7ff91ec9ebe7789eab37510874de9edf4.tar.xz
soc/intel/cnl and mainboards: Drop `cnl_configure_pads()`
CB:31250 ("soc/intel/cannonlake: Configure GPIOs again after FSP-S is done") introduced a workaround in coreboot for `soc/intel/cannonlake` platforms to save and restore GPIO configuration performed by mainboard across call to FSP Silicon Init (FSP-S). This workaround was required because FSP-S was configuring GPIOs differently than mainboard resulting in boot and runtime issues because of misconfigured GPIOs. This issue has since been fixed in FSP (verified with FSP v1263 on hatch). However, there were still 4 boards in coreboot using `cnl_configure_pads()`. As part of RFC CB:50829, librem_cnl, clevo/cml-u and system76/lemp9 were tested to ensure that this workaround is no longer required. This change drops the workaround using `cnl_configure_pads()` and updates all mainboards to use `gpio_configure_pads()` instead. Signed-off-by: Furquan Shaikh <furquan@google.com> Tested-by: Angel Pons <th3fanbus@gmail.com> (Tested purism/librem_cnl) Tested-by: Michael Niewöhner <foss@mniewoehner.de> (Tested clevo/cml-u which is similar to system76/lemp9) Change-Id: I7a4facbf23fc81707cb111859600e641fde34fc4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52248 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
-rw-r--r--src/mainboard/google/drallion/ramstage.c3
-rw-r--r--src/mainboard/google/sarien/ramstage.c2
-rw-r--r--src/mainboard/purism/librem_cnl/ramstage.c2
-rw-r--r--src/mainboard/system76/lemp9/ramstage.c2
-rw-r--r--src/soc/intel/cannonlake/chip.c31
-rw-r--r--src/soc/intel/cannonlake/include/soc/gpio.h2
6 files changed, 5 insertions, 37 deletions
diff --git a/src/mainboard/google/drallion/ramstage.c b/src/mainboard/google/drallion/ramstage.c
index ceba219ecf..d44c7b19d3 100644
--- a/src/mainboard/google/drallion/ramstage.c
+++ b/src/mainboard/google/drallion/ramstage.c
@@ -2,7 +2,6 @@
#include <acpi/acpi.h>
#include <smbios.h>
-#include <soc/gpio.h>
#include <soc/ramstage.h>
#include <variant/gpio.h>
#include <vendorcode/google/chromeos/chromeos.h>
@@ -30,7 +29,7 @@ static void mainboard_init(void *chip_info)
size_t num_gpios;
gpio_table = variant_gpio_table(&num_gpios);
- cnl_configure_pads(gpio_table, num_gpios);
+ gpio_configure_pads(gpio_table, num_gpios);
}
static void mainboard_enable(struct device *dev)
diff --git a/src/mainboard/google/sarien/ramstage.c b/src/mainboard/google/sarien/ramstage.c
index de97c686ee..6287628a88 100644
--- a/src/mainboard/google/sarien/ramstage.c
+++ b/src/mainboard/google/sarien/ramstage.c
@@ -39,7 +39,7 @@ static void mainboard_init(void *chip_info)
size_t num_gpios;
gpio_table = variant_gpio_table(&num_gpios);
- cnl_configure_pads(gpio_table, num_gpios);
+ gpio_configure_pads(gpio_table, num_gpios);
/* Disable unused pads for devices with board ID > 2 */
if (board_id() > 2)
diff --git a/src/mainboard/purism/librem_cnl/ramstage.c b/src/mainboard/purism/librem_cnl/ramstage.c
index 381d03be13..0d5dd55e72 100644
--- a/src/mainboard/purism/librem_cnl/ramstage.c
+++ b/src/mainboard/purism/librem_cnl/ramstage.c
@@ -9,5 +9,5 @@ void mainboard_silicon_init_params(FSPS_UPD *supd)
* dependencies during hardware initialization. */
size_t num_gpios;
const struct pad_config *gpio_table = variant_gpio_table(&num_gpios);
- cnl_configure_pads(gpio_table, num_gpios);
+ gpio_configure_pads(gpio_table, num_gpios);
}
diff --git a/src/mainboard/system76/lemp9/ramstage.c b/src/mainboard/system76/lemp9/ramstage.c
index 35ffd53bc1..aef7f71a0e 100644
--- a/src/mainboard/system76/lemp9/ramstage.c
+++ b/src/mainboard/system76/lemp9/ramstage.c
@@ -7,5 +7,5 @@ void mainboard_silicon_init_params(FSPS_UPD *supd)
{
/* Configure pads prior to SiliconInit() in case there's any
* dependencies during hardware initialization. */
- cnl_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
+ gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
}
diff --git a/src/soc/intel/cannonlake/chip.c b/src/soc/intel/cannonlake/chip.c
index 4f467a1ab7..c651c59826 100644
--- a/src/soc/intel/cannonlake/chip.c
+++ b/src/soc/intel/cannonlake/chip.c
@@ -11,7 +11,6 @@
#include <intelblocks/pcie_rp.h>
#include <intelblocks/xdci.h>
#include <soc/intel/common/vbt.h>
-#include <soc/gpio.h>
#include <soc/pci_devs.h>
#include <soc/ramstage.h>
@@ -140,33 +139,6 @@ const char *soc_acpi_name(const struct device *dev)
}
#endif
-/*
- * TODO(furquan): Get rid of this workaround once FSP is fixed. Currently, FSP-S
- * configures GPIOs when it should not and this results in coreboot GPIO
- * configuration being overwritten. Until FSP is fixed, maintain the reference
- * of GPIO config table from mainboard and use that to re-configure GPIOs after
- * FSP-S is done.
- */
-void cnl_configure_pads(const struct pad_config *cfg, size_t num_pads)
-{
- static const struct pad_config *g_cfg;
- static size_t g_num_pads;
-
- /*
- * If cfg and num_pads are passed in from mainboard, maintain a
- * reference to the GPIO table.
- */
- if ((cfg == NULL) || (num_pads == 0)) {
- cfg = g_cfg;
- num_pads = g_num_pads;
- } else {
- g_cfg = cfg;
- g_num_pads = num_pads;
- }
-
- gpio_configure_pads(cfg, num_pads);
-}
-
void soc_init_pre_device(void *chip_info)
{
/* Perform silicon specific init. */
@@ -175,9 +147,6 @@ void soc_init_pre_device(void *chip_info)
/* Display FIRMWARE_VERSION_INFO_HOB */
fsp_display_fvi_version_hob();
- /* TODO(furquan): Get rid of this workaround once FSP is fixed. */
- cnl_configure_pads(NULL, 0);
-
soc_gpio_pm_configuration();
/* swap enabled PCI ports in device tree if needed */
diff --git a/src/soc/intel/cannonlake/include/soc/gpio.h b/src/soc/intel/cannonlake/include/soc/gpio.h
index 9ffa8f1bc2..f204ca2510 100644
--- a/src/soc/intel/cannonlake/include/soc/gpio.h
+++ b/src/soc/intel/cannonlake/include/soc/gpio.h
@@ -19,7 +19,7 @@
#ifndef __ACPI__
struct pad_config;
-void cnl_configure_pads(const struct pad_config *cfg, size_t num_pads);
+
/*
* Routine to perform below operations:
* 1. SoC routine to fill GPIO PM mask and value for GPIO_MISCCFG register