summaryrefslogtreecommitdiff
path: root/Documentation/Intel
diff options
context:
space:
mode:
authorLee Leahy <leroy.p.leahy@intel.com>2016-02-14 14:55:29 -0800
committerLeroy P Leahy <leroy.p.leahy@intel.com>2016-02-19 20:24:02 +0100
commitde8c7e39bce97f13e09e53a3a1bdf4edcfebec79 (patch)
tree53185fa99738fe924bcee9ffae2b21b0b0ccc3db /Documentation/Intel
parentdb7410e0a4250631e9757c2dbd6514dd2559da2a (diff)
downloadcoreboot-de8c7e39bce97f13e09e53a3a1bdf4edcfebec79.tar.xz
Documentation: x86 device tree processing and memory map
Add documentation on: * FSP Silicon Init * How to start the x86 device tree processing for ramstage * Disabling the PCI devices * Generic PCI device drivers * Memory map support TEST=None Change-Id: If8f729a0ea1d48db4d5ec1d4ae3ad693e9fe44f0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13718 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
Diffstat (limited to 'Documentation/Intel')
-rw-r--r--Documentation/Intel/Board/board.html29
-rw-r--r--Documentation/Intel/SoC/soc.html178
-rw-r--r--Documentation/Intel/development.html83
3 files changed, 287 insertions, 3 deletions
diff --git a/Documentation/Intel/Board/board.html b/Documentation/Intel/Board/board.html
index 47d329515d..91aa3054d4 100644
--- a/Documentation/Intel/Board/board.html
+++ b/Documentation/Intel/Board/board.html
@@ -16,6 +16,7 @@
<li><a href="#RequiredFiles">Required Files</a></li>
<li>Enable <a href="#SerialOutput">Serial Output</a></li>
<li>Load the <a href="#SpdData">Memory Timing Data</a></li>
+ <li><a href="#DisablePciDevices">Disable</a> the PCI devices</li>
</ol>
@@ -181,7 +182,33 @@
</ol>
+
+<hr>
+<h1><a name="DisablePciDevices">Disable PCI Devices</a></h1>
+<p>
+ Ramstage's BS_DEV_ENUMERATE state displays the PCI vendor and device IDs for all
+ of the devices in the system. Edit the devicetree.cb file:
+</p>
+<ol>
+ <li>Edit the devicetree.cb file:
+ <ol type="A">
+ <li>Add an entry for a PCI device.function and turn it off. The entry
+ should look similar to:
+<pre><code>device pci 14.0 off end</code></pre>
+ </li>
+ <li>Turn on the devices for:
+ <ul>
+ <li>Memory Controller</li>
+ <li>Debug serial device</li>
+ </ul>
+ </li>
+ </ol>
+ </li>
+ <li>Debug until the BS_DEV_ENUMERATE state shows the proper state for all of the devices</li>
+</ol>
+
+
<hr>
-<p>Modified: 31 January 2016</p>
+<p>Modified: 15 February 2016</p>
</body>
</html> \ No newline at end of file
diff --git a/Documentation/Intel/SoC/soc.html b/Documentation/Intel/SoC/soc.html
index b5daac8fb5..146e768183 100644
--- a/Documentation/Intel/SoC/soc.html
+++ b/Documentation/Intel/SoC/soc.html
@@ -26,6 +26,12 @@
<li>Add the <a href="#MemoryInit">MemoryInit</a> Support</li>
</ol>
</li>
+ <li><a href="#Ramstage">Ramstage</a>
+ <ol type="A">
+ <li><a href="#DeviceTree">Start Device Tree Processing</a></li>
+ <li>Set up the <a href="#MemoryMap">Memory Map"</a></li>
+ </ol>
+ </li>
</ol>
@@ -382,6 +388,176 @@ Use the following steps to debug the call to TempRamInit:
<hr>
-<p>Modified: 31 January 2016</p>
+<h1><a name="Ramstage">Ramstage</a></h1>
+
+<h2><a name="DeviceTree">Start Device Tree Processing</a></h2>
+<p>
+ The src/mainboard/&lt;Vendor&gt;/&lt;Board&gt;/devicetree.cb file drives the
+ execution during ramstage. This file is processed by the util/sconfig utility
+ to generate build/mainboard/&lt;Vendor&gt;/&lt;Board&gt;/static.c. The various
+ state routines in
+ src/lib/<a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/lib/hardwaremain.c;hb=HEAD#l128">hardwaremain.c</a>
+ call dev_* routines which use the tables in static.c to locate operation tables
+ associated with the various chips and devices. After location the operation
+ tables, the state routines call one or more functions depending upon the
+ state of the state machine.
+</p>
+
+<h3><a name="ChipOperations">Chip Operations</a></h3>
+<p>
+ Kick-starting the ramstage state machine requires creating the operation table
+ for the chip listed in devicetree.cb:
+</p>
+<ol>
+ <li>Edit src/soc/&lt;SoC Vendor&gt;/&lt;SoC Family&gt;/chip.c:
+ <ol type="A">
+ <li>
+ This chip's operation table has the name
+ soc_&lt;SoC Vendor&gt;_&lt;SoC Family&gt;_ops which is derived from the
+ chip path specified in the devicetree.cb file.
+ </li>
+ <li>Use the CHIP_NAME macro to specify the name for the chip</li>
+ <li>For FSP 1.1, specify a .init routine which calls intel_silicon_init</li>
+ </ol>
+ </li>
+ <li>Edit src/soc/&lt;SoC Vendor&gt;/&lt;SoC Family&gt;/Makefile.inc and add chip.c to ramstage</li>
+</ol>
+
+<h3>Domain Operations</h3>
+<p>
+ coreboot uses the domain operation table to initiate operations on all of the
+ devices in the domain. By default coreboot enables all PCI devices which it
+ finds. Listing a device in devicetree.cb gives the board vendor control over
+ the device state. Non-PCI devices may also be listed under PCI device such as
+ the LPC bus or SMbus devices.
+</p>
+<ol>
+ <li>Edit src/soc/&lt;SoC Vendor&gt;/&lt;SoC Family&gt;/chip.c:
+ <ol type="A">
+ <li>
+ The domain operation table is typically placed in
+ src/soc/&lt;SoC Vendor&gt;/&lt;SoC Family&gt;/chip.c.
+ The table typically looks like the following:
+<pre><code>static struct device_operations pci_domain_ops = {
+ .read_resources = pci_domain_read_resources,
+ .set_resources = pci_domain_set_resources,
+ .scan_bus = pci_domain_scan_bus,
+ .ops_pci_bus = pci_bus_default_ops,
+};
+</code></pre>
+ </li>
+ <li>
+ Create a .enable_dev entry in the chip operations table which points to a
+ routine which sets the domain table for the device with the DEVICE_PATH_DOMAIN.
+<pre><code> if (dev->path.type == DEVICE_PATH_DOMAIN) {
+ dev->ops = &pci_domain_ops;
+ }
+</code></pre>
+ </li>
+ <li>
+ During the BS_DEV_ENUMERATE state, ramstage now display the device IDs
+ for the PCI devices on the bus.
+ </li>
+ </ol>
+ </li>
+ <li>Set CONFIG_DEBUG_BOOT_STATE=y in the .config file</li>
+ <li>
+ Debug the result until the PCI vendor and device IDs are displayed
+ during the BS_DEV_ENUMERATE state.
+ </li>
+</ol>
+
+
+<h2><a name="DeviceDrivers">PCI Device Drivers</a></h2>
+<p>
+ PCI device drivers consist of a ".c" file which contains a "pci_driver" data
+ structure at the end of the file with the attribute tag "__pci_driver". This
+ attribute tag places an entry into a link time table listing the various
+ coreboot device drivers.
+</p>
+<p>
+ Specify the following fields in the table:
+</p>
+<ol>
+ <li>.vendor - PCI vendor ID value of the device</li>
+ <li>.device - PCI device ID value of the device or<br>
+ .devices - Address of a zero terminated array of PCI device IDs
+ </li>
+ <li>.ops - Operations table for the device. This is the address
+ of a "static struct device_operations" data structure specifying
+ the routines to execute during the different states and sub-states
+ of ramstage's processing.
+ </li>
+ <li>Turn on the device in mainboard/&lt;Vendor&gt;/&lt;Board&gt;/devicetree.cb</li>
+ <li>
+ Debug until the device is on and properly configured in coreboot and
+ usable by the payload
+ </li>
+</ol>
+
+<h3><a name="SubsystemIds">Subsystem IDs</a></h3>
+<p>
+ PCI subsystem IDs are assigned during the BS_DEV_ENABLE state. The device
+ driver may use the common mechanism to assign subsystem IDs by adding
+ the ".ops_pci" to the pci_driver data structure. This field points to
+ a "struct pci_operations" that specifies a routine to set the subsystem
+ IDs for the device. The routine might look something like this:
+</p>
+<pre><code>static void pci_set_subsystem(device_t dev, unsigned vendor, unsigned device)
+{
+ if (!vendor || !device) {
+ vendor = pci_read_config32(dev, PCI_VENDOR_ID);
+ device = vendor >> 16;
+ }
+ printk(BIOS_SPEW,
+ "PCI: %02x:%02x:%d subsystem vendor: 0x%04x, device: 0x%04x\n",
+ 0, PCI_SLOT(dev->path.pci.devfn), PCI_FUNC(dev->path.pci.devfn),
+ vendor & 0xffff, device);
+ pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID,
+ ((device & 0xffff) << 16) | (vendor & 0xffff));
+}
+</code></pre>
+
+
+
+<h2>Set up the <a name="MemoryMap">Memory Map</a></h2>
+<p>
+ The memory map is built by the various PCI device drivers during the
+ BS_DEV_RESOURCES state of ramstage. The northcluster driver will typically
+ specify the DRAM resources while the other drivers will typically specify
+ the IO resources. These resources are hung off the device_t data structure by
+ src/device/device_util.c/<a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/device/device_util.c;hb=HEAD#l448">new_resource</a>.
+</p>
+<p>
+ During the BS_WRITE_TABLES state, coreboot collects these resources and
+ places them into a data structure identified by LB_MEM_TABLE.
+</p>
+<p>
+ Edit the device driver file:
+</p>
+<ol>
+ <li>
+ Implement a read_resources routine which calls macros defined in
+ src/include/device/<a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/include/device/device.h;hb=HEAD#l237">device.h</a>
+ like:
+ <ul>
+ <li>ram_resource</li>
+ <li>reserved_ram_resource</li>
+ <li>bad_ram_resource</li>
+ <li>uma_resource</li>
+ <li>mmio_resource</li>
+ </ul>
+ </li>
+</ol>
+
+<p>
+ Testing: Verify that the resources are properly displayed by coreboot during the BS_WRITE_TABLES state.
+</p>
+
+
+
+
+<hr>
+<p>Modified: 18 February 2016</p>
</body>
</html> \ No newline at end of file
diff --git a/Documentation/Intel/development.html b/Documentation/Intel/development.html
index 0cd2bd59b7..a3136d19d1 100644
--- a/Documentation/Intel/development.html
+++ b/Documentation/Intel/development.html
@@ -94,6 +94,24 @@
</li>
</ol>
</li>
+ <li>
+ Implement the .init routine for the
+ <a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a>
+ structure which calls FSP SiliconInit
+ </li>
+ <li>
+ Start ramstage's
+ <a target="_blank" href="SoC/soc.html#DeviceTree">device tree processing</a>
+ to display the PCI vendor and device IDs
+ </li>
+ <li>
+ Disable the
+ <a target="_blank" href="Board/board.html#DisablePciDevices">PCI devices</a>
+ </li>
+ <li>
+ Implement the
+ <a target="_blank" href="SoC/soc.html#MemoryMap">memory map</a>
+ </li>
</ol>
@@ -129,6 +147,31 @@
Disable: CONFIG_DISPLAY_MTRRS=y, MTRRs displayed after call to TempRamExit
</td>
</tr>
+ <tr>
+ <td>Memory Map</td>
+ <td>
+ Implement a device driver for the
+ <a target="_blank" href="SoC/soc.html#MemoryMap">north cluster</a>
+ </td>
+ <td>coreboot displays the memory map correctly during the BS_WRITE_TABLES state</td>
+ </tr>
+ <tr>
+ <td>PCI Device Support</td>
+ <td>Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a></td>
+ <td>The device is detected by coreboot and usable by the payload</td>
+ </tr>
+ <tr>
+ <td>Ramstage state machine</td>
+ <td>
+ Implement the chip and domain operations to start the
+ <a target="_blank" href="SoC/soc.html#DeviceTree">device tree</a>
+ processing
+ </td>
+ <td>
+ During the BS_DEV_ENUMERATE state, ramstage now display the device IDs
+ for the PCI devices on the bus.
+ </td>
+ </tr>
<tr bgcolor="#c0ffc0">
@@ -137,6 +180,19 @@
<th>Testing</th>
</tr>
<tr>
+ <td>Device Tree</td>
+ <td>
+ <a target="_blank" href="SoC/soc.html#DeviceTree">List</a> PCI vendor and device IDs by starting
+ the device tree processing<br>
+ <a target="_blank" href="Board/board.html#DisablePciDevices">Disable</a> PCI devices<br>
+ Enable: Implement a PCI <a target="_blank" href="SoC/soc.html#DeviceDrivers">device driver</a>
+ <td>
+ List: BS_DEV_ENUMERATE state displays PCI vendor and device IDs<br>
+ Disable: BS_DEV_ENUMERATE state shows the devices as disabled<br>
+ Enable: BS_DEV_ENUMERATE state shows the device as on and the device works for the payload
+ </td>
+ </tr>
+ <tr>
<td>DRAM</td>
<td>
Load SPD data: src/soc/mainboard/&lt;Vendor&gt;/&lt;Board&gt;/spd/<a target="_blank" href="Board/board.html#SpdData">spd.c</a><br>
@@ -208,11 +264,36 @@
</ul>
</td>
</tr>
+ <tr>
+ <td>SiliconInit</td>
+ <td>
+ Implement the .init routine for the
+ <a target="_blank" href="SoC/soc.html#ChipOperations">chip operations</a> structure
+ </td>
+ <td>During BS_DEV_INIT_CHIPS state, SiliconInit gets called and returns 0x00000000</td>
+ </tr>
+ <tr>
+ <td>FspNotify</td>
+ <td>
+ The code which calls FspNotify is located in
+ src/drivers/intel/fsp1_1/<a target="_blank" href="http://review.coreboot.org/gitweb?p=coreboot.git;a=blob;f=src/drivers/intel/fsp1_1/fsp_util.c;hb=HEAD#l182">fsp_util.c</a>.
+ The fsp_notify_boot_state_callback routine is called three times as specified
+ by the BOOT_STATE_INIT_ENTRY macros below the routine.
+ </td>
+ <td>
+ The FspNotify routines are called during:
+ <ul>
+ <li>BS_DEV_RESOURCES - on exit</li>
+ <li>BS_PAYLOAD_LOAD - on exit</li>
+ <li>BS_OS_RESUME - on entry (S3 resume)</li>
+ </ul>
+ </td>
+ </tr>
</table>
<hr>
-<p>Modified: 31 January 2016</p>
+<p>Modified: 15 February 2016</p>
</body>
</html> \ No newline at end of file