summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorTristan Corrick <tristan@corrick.kiwi>2018-12-22 00:04:18 +1300
committerPhilipp Deppenwiese <zaolin.daisuki@gmail.com>2018-12-29 18:26:46 +0000
commit44095c1edc4387cd68103dca750cb7a28f5fa745 (patch)
tree1d3ef3b8a8781b416e401ab01a148ad9285ecd9d /Documentation
parent8e9921178d86077b6edac21676f9da251173416b (diff)
downloadcoreboot-44095c1edc4387cd68103dca750cb7a28f5fa745.tar.xz
mainboard: Add Supermicro X10SLM+-F
This board runs well with coreboot. The documentation part of this commit lists what works and what doesn't. Tested with GRUB 2.02 as a payload, loading SeaBIOS 1.12.0 which then boots FreeBSD 11.2. It has also been tested with GRUB directly booting Debian GNU/Linux 9.6 (kernel 4.9). Change-Id: I291573d4651bdffe24eb841033ea6189fcbf8502 Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/c/30357 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/mainboard/index.md4
-rw-r--r--Documentation/mainboard/supermicro/x10slm-f.md203
2 files changed, 207 insertions, 0 deletions
diff --git a/Documentation/mainboard/index.md b/Documentation/mainboard/index.md
index f97e178908..4e2b742045 100644
--- a/Documentation/mainboard/index.md
+++ b/Documentation/mainboard/index.md
@@ -66,3 +66,7 @@ The boards in this section are not real mainboards, but emulators.
## SiFive
- [SiFive HiFive Unleashed](sifive/hifive-unleashed.md)
+
+## Supermicro
+
+- [X10SLM+-F](supermicro/x10slm-f.md)
diff --git a/Documentation/mainboard/supermicro/x10slm-f.md b/Documentation/mainboard/supermicro/x10slm-f.md
new file mode 100644
index 0000000000..8d03429ab6
--- /dev/null
+++ b/Documentation/mainboard/supermicro/x10slm-f.md
@@ -0,0 +1,203 @@
+# Supermicro X10SLM+-F
+
+This section details how to run coreboot on the [Supermicro X10SLM+-F].
+
+## Required proprietary blobs
+
+```eval_rst
+Please see :doc:`../../northbridge/intel/haswell/mrc.bin`.
+```
+
+## Building coreboot
+
+```eval_rst
+If you haven't already, build the coreboot toolchain as described in
+:doc:`../../lessons/lesson1`.
+```
+
+A fully working image should be possible so long as you have the
+Haswell `mrc.bin` file. You can set the basic config with the following
+commands. However, it is strongly advised to use `make menuconfig`
+afterwards (or instead), so that you can see all of the settings.
+
+```bash
+make distclean # Note: this will remove your current config, if it exists.
+touch .config
+./util/scripts/config --enable VENDOR_SUPERMICRO
+./util/scripts/config --enable BOARD_SUPERMICRO_X10SLM_PLUS_F
+./util/scripts/config --enable HAVE_MRC
+make olddefconfig
+```
+
+If you don't plan on using coreboot's serial console to collect logs,
+you might want to disable it at this point (`./util/scripts/config
+--disable CONSOLE_SERIAL`). It should reduce the boot time by several
+seconds. However, a more flexible method is to change the console log
+level from within an OS using `util/nvramtool`, or with the `nvramcui`
+payload.
+
+Now, run `make` to build the coreboot image.
+
+## Flashing coreboot
+
+```eval_rst
+In addition to the information here, please see the
+:doc:`../../flash_tutorial/index`.
+```
+
+### Internal programming
+
+Under the vendor firmware, the BIOS region of the flash chip is
+write-protected. Additionally, the vendor flashing tool does not work
+with a coreboot image. So, [external programming](#external-programming)
+needs to be used when first installing coreboot. By default, coreboot is
+not configured to write-protect the BIOS region, so internal programming
+can be used thereafter.
+
+[flashrom] may be used to flash coreboot internally:
+
+```bash
+sudo flashrom -p internal --ifd -i bios --noverify-all -w coreboot.rom
+```
+
+The use of `--noverify-all` is required since the Management Engine
+region is not readable even by the host.
+
+### External programming
+
+The main firmware flash chip is an SOIC-8 package located near the CMOS
+battery and SATA ports. It should come with a sticker attached that
+states the firmware revision (e.g. "X10SLH 4.424"). The chip model is
+an N25Q128A, and the datasheet can be found [here][N25Q128A].
+
+As with [internal programming](#internal-programming), [flashrom] works
+reliably:
+
+```bash
+flashrom -p <your-programmer> --ifd -i bios -w coreboot.rom
+```
+
+For flashing to work, power to the board should be disconnected (ACPI
+G3), and power should be supplied from the external programmer. There is
+a diode attached to Vcc, so such flashing should not damage the board.
+During testing, a single X10SLM+-F has been flashed dozens of times this
+way without issue.
+
+## BMC (IPMI)
+
+This board has an ASPEED [AST2400], which has BMC functionality. The
+BMC firmware resides in a 32 MiB SOIC-16 chip just above the [AST2400].
+This chip is an MX25L25635F, whose datasheet can be found
+[here][MX25L25635F].
+
+### Removing the BMC functionality
+
+The BMC functionality on this board can be removed. If you do not need
+its features, removing the BMC functionality might increase security.
+This topic has not been widely explored, and you should only **undertake
+this process at your own risk.**
+
+There is a jumper labelled `JPB1` on the board that states the ability
+to disable the BMC. Though, pins 1 and 2 are fixed together, keeping
+the BMC enabled. It might be possible to disable the BMC by cutting the
+connection between pins 1 and 2 (and then connecting pins 2 and 3). This
+has not been tested so far.
+
+Another approach is to erase the entire BMC firmware chip. However, if
+this is done, and the board's power cycled, the voltage changes on some
+pins of the flash chip, **so it will be harder to flash it again!**
+
+To remove the firmware, connect an external programmer to the BMC
+firmware chip. Vcc should **not** be connected via the external
+programmer. The system should be turned off, but the power still
+connected (ACPI S5). Then, erase the chip with [flashrom]. Power cycle
+the board, and the BMC should no longer be active.
+
+If you erase the BMC firmware while using the **vendor BIOS**, you
+will need to cut the connection between pins 1 and 2 of `JPB1`. The
+system will stall for two minutes each time when booting, but it will
+eventually start. There is no such delay when running coreboot.
+
+## ECC DRAM
+
+```eval_rst
+ECC DRAM seems to work, but please see
+:doc:`../../northbridge/intel/haswell/mrc.bin`
+for caveats.
+```
+
+## Known issues
+
+- The x8 PCIe slots do not work, as the Haswell code is missing support.
+ The code to support it has been written, but it still needs to be
+ reviewed and merged.
+
+- Broadwell CPUs are not supported. They might work with minimal changes
+ to the code, but this has not been tested.
+
+- The PCH thermal sensor doesn't yet have a driver in coreboot, so it
+ can't be used for temperature readings.
+
+- There is no automatic, OS-independent fan control. This is because
+ the super I/O hardware monitor can only obtain valid CPU temperature
+ readings from the PECI agent, but the required driver doesn't exist
+ in coreboot. The `coretemp` driver can still be used for accurate CPU
+ temperature readings from an OS, and hence the OS can do fan control.
+
+## Untested
+
+- TPM
+- PCIe x4 slot (it will almost certainly work)
+- BMC (IPMI) functionality
+- internal serial port
+- chassis intrusion header
+- SATA DOM header
+- standby power header
+- serial GPIO headers
+- power supply SMBus header
+- jumpers not otherwise mentioned
+- LEDs
+
+## Working
+
+- USB
+- S3 suspend/resume
+- Gigabit Ethernet
+- SATA
+- external serial port
+- VGA graphics
+- disabling VGA graphics using the jumper
+- hiding the AST2400 using the CMOS setting
+- super I/O hardware monitor (see [Known issues](#known-issues))
+- initialisation with Haswell MRC version 1.6.1 build 2
+- flashrom under coreboot
+- Wake-on-LAN
+- front panel header
+- internal buzzer
+
+## Technology
+
+```eval_rst
++------------------+--------------------------------------------------+
+| CPU | :doc:`../../northbridge/intel/haswell/index` |
++------------------+--------------------------------------------------+
+| PCH | Intel Lynx Point (C224) |
++------------------+--------------------------------------------------+
+| Super I/O | Nuvoton NCT6776 |
++------------------+--------------------------------------------------+
+| Coprocessor | Intel SPS (server version of the ME) |
++------------------+--------------------------------------------------+
+| Coprocessor | ASPEED AST2400 |
++------------------+--------------------------------------------------+
+```
+
+## Extra links
+
+- [Board manual]
+
+[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
+[Board manual]: https://www.supermicro.com/manuals/motherboard/C224/MNL-1500.pdf
+[flashrom]: https://flashrom.org/Flashrom
+[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
+[N25Q128A]: https://www.micron.com/~/media/Documents/Products/Data%20Sheet/NOR%20Flash/Serial%20NOR/N25Q/n25q_128mb_3v_65nm.pdf
+[Supermicro X10SLM+-F]: https://www.supermicro.com/products/motherboard/xeon/c220/x10slm_-f.cfm