mainboard/intel/galileo: Add vboot support

Add the necessary files and changes to support vboot.

TEST=Build and run on Galileo Gen2 with a SparkFun CryptoShield

1.  Obtain and install a SparkFun CryptoShield.
    https://www.sparkfun.com/products/13183

2.  Edit src/mainboard/intel/galileo/Kconfig to select
    VBOOT_WITH_CRYPTO_SHIELD

3.  Use make menuconfig to update the config values and select a
    payload that will fit.  I used SeaBIOS which does not boot.

4.  Build coreboot

5.  Use the command file below to generate the signed coreboot image.

6.  Flash build/coreboot.rom onto the Galileo board

7.  The test is successful if verstage detects that it needs recovery
    after Phase 1.  This is expected because the image does not contain
    the GBB section.

8.  Flash build/coreboot.signed.bin onto the Galileo board

9.  The test is successful if verstage reaches Phase 4 and selects SLOT
    A to load the rest of the files.

commands:
gbb_utility -c 0x100,0x1000,0x7ce80,0x1000 gbb.blob

dd  conv=fdatasync  ibs=4096  obs=4096  count=1553  \
if=build/coreboot.rom  of=build/coreboot.signed.rom

dd  conv=fdatasync  obs=4096  obs=4096  seek=1553  if=gbb.blob  \
of=build/coreboot.signed.rom

dd  conv=fdatasync  ibs=4096  obs=4096  skip=1680  seek=1680  \
count=368  if=build/coreboot.rom  of=build/coreboot.signed.rom

gbb_utility                       \
--set --hwid='Galileo'            \
-r $PWD/keys/recovery_key.vbpubk  \
-k $PWD/keys/root_key.vbpubk      \
build/coreboot.signed.rom

3rdparty/vboot/scripts/image_signing/sign_firmware.sh  \
build/coreboot.signed.rom                              \
$PWD/keys                                              \
build/coreboot.signed.rom

Change-Id: I02eb0ef647cd34c13a5fe8be0bdbe1bb38524d0c
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/18821
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

0 files changed, 0 insertions, 0 deletions