summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers/serial
diff options
context:
space:
mode:
authorStefan Reinauer <stefan.reinauer@coreboot.org>2015-06-29 15:47:34 -0700
committerStefan Reinauer <stefan.reinauer@coreboot.org>2015-06-30 18:55:15 +0200
commit1b4d39428eac80bc76713b1f21a2c85e8900c1b8 (patch)
treee2b9dfea6be47c785fa55964950c691643d0a232 /payloads/libpayload/drivers/serial
parentde60c8899680f362a908d68efe9e4154ab3380be (diff)
downloadcoreboot-1b4d39428eac80bc76713b1f21a2c85e8900c1b8.tar.xz
libpayload: Make Kconfig bools use IS_ENABLED()
This will make the code work with the different styles of Kconfig (emit unset bools vs don't emit unset bools) Roughly, the patch does this, and a little bit of fixing up: perl -pi -e 's,ifdef (CONFIG_LP_.+?)\b,if IS_ENABLED\($1\),g' `find . -name *.[ch]` perl -pi -e 's,ifndef (CONFIG_LP_.+?)\b,if !IS_ENABLED\($1\),g' `find . -name *.[ch]` Change-Id: Ib8a839b056a1f806a8597052e1b571ea3d18a79f Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/10711 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Diffstat (limited to 'payloads/libpayload/drivers/serial')
-rw-r--r--payloads/libpayload/drivers/serial/8250.c10
1 files changed, 5 insertions, 5 deletions
diff --git a/payloads/libpayload/drivers/serial/8250.c b/payloads/libpayload/drivers/serial/8250.c
index bca0057bb3..e9550f3e33 100644
--- a/payloads/libpayload/drivers/serial/8250.c
+++ b/payloads/libpayload/drivers/serial/8250.c
@@ -41,7 +41,7 @@ static uint8_t serial_read_reg(int offset)
{
offset *= lib_sysinfo.serial->regwidth;
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
+#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
if (!serial_is_mem_mapped)
return inb(IOBASE + offset);
else
@@ -53,7 +53,7 @@ static void serial_write_reg(uint8_t val, int offset)
{
offset *= lib_sysinfo.serial->regwidth;
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
+#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
if (!serial_is_mem_mapped)
outb(val, IOBASE + offset);
else
@@ -61,7 +61,7 @@ static void serial_write_reg(uint8_t val, int offset)
writeb(val, MEMBASE + offset);
}
-#ifdef CONFIG_LP_SERIAL_SET_SPEED
+#if IS_ENABLED(CONFIG_LP_SERIAL_SET_SPEED)
static void serial_hardware_init(int speed, int word_bits,
int parity, int stop_bits)
{
@@ -106,7 +106,7 @@ void serial_init(void)
(lib_sysinfo.serial->type == CB_SERIAL_TYPE_MEMORY_MAPPED);
if (!serial_is_mem_mapped) {
-#ifdef CONFIG_LP_IO_ADDRESS_SPACE
+#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
if ((inb(IOBASE + 0x05) == 0xFF) &&
(inb(IOBASE + 0x06) == 0xFF)) {
printf("IO space mapped serial not present.");
@@ -118,7 +118,7 @@ void serial_init(void)
#endif
}
-#ifdef CONFIG_LP_SERIAL_SET_SPEED
+#if IS_ENABLED(CONFIG_LP_SERIAL_SET_SPEED)
serial_hardware_init(CONFIG_LP_SERIAL_BAUD_RATE, 8, 0, 1);
#endif
}