summaryrefslogtreecommitdiff
path: root/payloads/libpayload/drivers
diff options
context:
space:
mode:
authorDave Frodin <dave.frodin@se-eng.com>2012-12-11 13:08:07 -0700
committerAnton Kochkov <anton.kochkov@gmail.com>2012-12-18 19:59:22 +0100
commit6bf11cf50c2b682f8c09a53af774588123b250b6 (patch)
tree8b6b43411f551cff98623c3606c74e7a1a3413b9 /payloads/libpayload/drivers
parent8024b655507441646b2158fc61532364cbe65972 (diff)
downloadcoreboot-6bf11cf50c2b682f8c09a53af774588123b250b6.tar.xz
libpayload: Use usb_debug() to show USB messages
Previously printf()'s were used to show USB messages which results in lots of USB information being shown when it isn't needed. This will now use the usb_debug() printing funtion that already exists in usb.h. Change-Id: I2199814de3327417417eb2e26a660f4a5557cb9f Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/2044 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
Diffstat (limited to 'payloads/libpayload/drivers')
-rw-r--r--payloads/libpayload/drivers/usb/ehci.c8
-rw-r--r--payloads/libpayload/drivers/usb/ehci_rh.c2
-rw-r--r--payloads/libpayload/drivers/usb/ohci.c6
-rw-r--r--payloads/libpayload/drivers/usb/uhci.c2
-rw-r--r--payloads/libpayload/drivers/usb/usb.c40
-rw-r--r--payloads/libpayload/drivers/usb/usbhid.c4
-rw-r--r--payloads/libpayload/drivers/usb/usbinit.c20
-rw-r--r--payloads/libpayload/drivers/usb/usbmsc.c22
-rw-r--r--payloads/libpayload/drivers/usb/xhci.c4
9 files changed, 54 insertions, 54 deletions
diff --git a/payloads/libpayload/drivers/usb/ehci.c b/payloads/libpayload/drivers/usb/ehci.c
index 6a1cfb5791..f27658dc0e 100644
--- a/payloads/libpayload/drivers/usb/ehci.c
+++ b/payloads/libpayload/drivers/usb/ehci.c
@@ -206,7 +206,7 @@ static int wait_for_tds(qtd_t *head)
&& timeout--)
udelay(50);
if (timeout < 0) {
- printf("Error: ehci: queue transfer "
+ usb_debug("Error: ehci: queue transfer "
"processing timed out.\n");
return 1;
}
@@ -362,7 +362,7 @@ static int ehci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq
(EHCI_SETUP << QTD_PID_SHIFT) |
(3 << QTD_CERR_SHIFT);
if (fill_td(cur, devreq, drlen) != drlen) {
- printf("ERROR: couldn't send the entire device request\n");
+ usb_debug("ERROR: couldn't send the entire device request\n");
}
qtd_t *next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
@@ -379,7 +379,7 @@ static int ehci_control (usbdev_t *dev, direction_t dir, int drlen, void *devreq
(((dir == OUT)?EHCI_OUT:EHCI_IN) << QTD_PID_SHIFT) |
(3 << QTD_CERR_SHIFT);
if (fill_td(cur, data, dalen) != dalen) {
- printf("ERROR: couldn't send the entire control payload\n");
+ usb_debug("ERROR: couldn't send the entire control payload\n");
}
next = memalign(32, sizeof(qtd_t));
cur->next_qtd = virt_to_phys(next);
@@ -556,7 +556,7 @@ static void *ehci_create_intr_queue(
}
}
if (nothing_placed) {
- printf("Error: Failed to place ehci interrupt queue head "
+ usb_debug("Error: Failed to place ehci interrupt queue head "
"into periodic schedule: no space left\n");
ehci_destroy_intr_queue(ep, intrq);
return NULL;
diff --git a/payloads/libpayload/drivers/usb/ehci_rh.c b/payloads/libpayload/drivers/usb/ehci_rh.c
index f58e1cf36c..89828040d1 100644
--- a/payloads/libpayload/drivers/usb/ehci_rh.c
+++ b/payloads/libpayload/drivers/usb/ehci_rh.c
@@ -107,7 +107,7 @@ ehci_rh_scanport (usbdev_t *dev, int port)
while ((RH_INST(dev)->ports[port] & P_PORT_RESET) && timeout--)
udelay(100);
if (RH_INST(dev)->ports[port] & P_PORT_RESET) {
- printf("Error: ehci_rh: port reset timed out.\n");
+ usb_debug("Error: ehci_rh: port reset timed out.\n");
return;
}
diff --git a/payloads/libpayload/drivers/usb/ohci.c b/payloads/libpayload/drivers/usb/ohci.c
index 7db3141f81..ece31e443e 100644
--- a/payloads/libpayload/drivers/usb/ohci.c
+++ b/payloads/libpayload/drivers/usb/ohci.c
@@ -130,7 +130,7 @@ ohci_init (pcidev_t addr)
* BASE ADDRESS only [31-12] bits. All other usually 0, but not all */
controller->reg_base = pci_read_config32 (controller->bus_address, 0x10) & 0xfffff000; // OHCI mandates MMIO, so bit 0 is clear
OHCI_INST (controller)->opreg = (opreg_t*)phys_to_virt(controller->reg_base);
- printf("OHCI Version %x.%x\n", (OHCI_INST (controller)->opreg->HcRevision >> 4) & 0xf, OHCI_INST (controller)->opreg->HcRevision & 0xf);
+ usb_debug("OHCI Version %x.%x\n", (OHCI_INST (controller)->opreg->HcRevision >> 4) & 0xf, OHCI_INST (controller)->opreg->HcRevision & 0xf);
if ((OHCI_INST (controller)->opreg->HcControl & HostControllerFunctionalStateMask) == USBReset) {
/* cold boot */
@@ -245,7 +245,7 @@ wait_for_ed(usbdev_t *dev, ed_t *head, int pages)
mdelay(1);
}
if (timeout < 0)
- printf("Error: ohci: endpoint "
+ usb_debug("Error: ohci: endpoint "
"descriptor processing timed out.\n");
/* Clear the done queue. */
ohci_process_done_queue(OHCI_INST(dev->controller), 1);
@@ -609,7 +609,7 @@ ohci_create_intr_queue(endpoint_t *const ep, const int reqsize,
}
}
if (nothing_placed) {
- printf("Error: Failed to place ohci interrupt endpoint "
+ usb_debug("Error: Failed to place ohci interrupt endpoint "
"descriptor into periodic table: no space left\n");
ohci_destroy_intr_queue(ep, intrq);
return NULL;
diff --git a/payloads/libpayload/drivers/usb/uhci.c b/payloads/libpayload/drivers/usb/uhci.c
index bf611d2613..b4ccb980a0 100644
--- a/payloads/libpayload/drivers/usb/uhci.c
+++ b/payloads/libpayload/drivers/usb/uhci.c
@@ -532,7 +532,7 @@ uhci_create_intr_queue (endpoint_t *ep, int reqsize, int reqcount, int reqtiming
}
}
if (nothing_placed) {
- printf("Error: Failed to place UHCI interrupt queue "
+ usb_debug("Error: Failed to place UHCI interrupt queue "
"head into framelist: no space left\n");
uhci_destroy_intr_queue(ep, q);
return NULL;
diff --git a/payloads/libpayload/drivers/usb/usb.c b/payloads/libpayload/drivers/usb/usb.c
index e51adaca7f..ff67e0c5cd 100644
--- a/payloads/libpayload/drivers/usb/usb.c
+++ b/payloads/libpayload/drivers/usb/usb.c
@@ -286,7 +286,7 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
(device_to_host, standard_type, dev_recp), 1, 0, 0);
dd = (device_descriptor_t *) dev->descriptor;
- printf ("* found device (0x%04x:0x%04x, USB %x.%x)",
+ usb_debug ("* found device (0x%04x:0x%04x, USB %x.%x)",
dd->idVendor, dd->idProduct,
dd->bcdUSB >> 8, dd->bcdUSB & 0xff);
dev->quirks = usb_quirk_check(dd->idVendor, dd->idProduct);
@@ -294,7 +294,7 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
usb_debug ("\ndevice has %x configurations\n", dd->bNumConfigurations);
if (dd->bNumConfigurations == 0) {
/* device isn't usable */
- printf ("... no usable configuration!\n");
+ usb_debug ("... no usable configuration!\n");
dev->address = 0;
return -1;
}
@@ -317,7 +317,7 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
num = interfaces;
} else {
- printf ("\nNOTICE: This driver defaults to using the first interface.\n"
+ usb_debug ("\nNOTICE: This driver defaults to using the first interface.\n"
"This might be the wrong choice and lead to limited functionality\n"
"of the device. Please report such a case to coreboot@coreboot.org\n"
"as you might be the first.\n");
@@ -390,16 +390,16 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
wireless_device = 0xe0,
misc_device = 0xef,
};
- printf(", class: ");
+ usb_debug(", class: ");
switch (class) {
case audio_device:
- printf("audio\n");
+ usb_debug("audio\n");
break;
case comm_device:
- printf("communication\n");
+ usb_debug("communication\n");
break;
case hid_device:
- printf ("HID\n");
+ usb_debug ("HID\n");
#ifdef CONFIG_USB_HID
controller->devices[adr]->init = usb_hid_init;
#else
@@ -407,16 +407,16 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
#endif
break;
case physical_device:
- printf("physical\n");
+ usb_debug("physical\n");
break;
case imaging_device:
- printf("camera\n");
+ usb_debug("camera\n");
break;
case printer_device:
- printf("printer\n");
+ usb_debug("printer\n");
break;
case msc_device:
- printf ("MSC\n");
+ usb_debug ("MSC\n");
#ifdef CONFIG_USB_MSC
controller->devices[adr]->init = usb_msc_init;
#else
@@ -424,7 +424,7 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
#endif
break;
case hub_device:
- printf ("hub\n");
+ usb_debug ("hub\n");
#ifdef CONFIG_USB_HUB
controller->devices[adr]->init = usb_hub_init;
#else
@@ -432,28 +432,28 @@ set_address (hci_t *controller, int speed, int hubport, int hubaddr)
#endif
break;
case cdc_device:
- printf("CDC\n");
+ usb_debug("CDC\n");
break;
case ccid_device:
- printf("smartcard / CCID\n");
+ usb_debug("smartcard / CCID\n");
break;
case security_device:
- printf("content security\n");
+ usb_debug("content security\n");
break;
case video_device:
- printf("video\n");
+ usb_debug("video\n");
break;
case healthcare_device:
- printf("healthcare\n");
+ usb_debug("healthcare\n");
break;
case diagnostic_device:
- printf("diagnostic\n");
+ usb_debug("diagnostic\n");
break;
case wireless_device:
- printf("wireless\n");
+ usb_debug("wireless\n");
break;
default:
- printf("unsupported class %x\n", class);
+ usb_debug("unsupported class %x\n", class);
break;
}
return adr;
diff --git a/payloads/libpayload/drivers/usb/usbhid.c b/payloads/libpayload/drivers/usb/usbhid.c
index 6af25680bc..ee8ba63842 100644
--- a/payloads/libpayload/drivers/usb/usbhid.c
+++ b/payloads/libpayload/drivers/usb/usbhid.c
@@ -407,11 +407,11 @@ static int usb_hid_set_layout (const char *country)
/* Found, changing keyboard layout */
map = &keyboard_layouts[i];
- printf(" Keyboard layout '%s'\n", map->country);
+ usb_debug(" Keyboard layout '%s'\n", map->country);
return 0;
}
- printf(" Keyboard layout '%s' not found, using '%s'\n",
+ usb_debug(" Keyboard layout '%s' not found, using '%s'\n",
country, map->country);
/* Nothing found, not changed */
diff --git a/payloads/libpayload/drivers/usb/usbinit.c b/payloads/libpayload/drivers/usb/usbinit.c
index f95e9c180b..2e466d307d 100644
--- a/payloads/libpayload/drivers/usb/usbinit.c
+++ b/payloads/libpayload/drivers/usb/usbinit.c
@@ -67,47 +67,47 @@ static int usb_controller_initialize(int bus, int dev, int func)
pci_command |= PCI_COMMAND_MASTER;
pci_write_config32(addr, PCI_COMMAND, pci_command);
- printf("%02x:%02x.%x %04x:%04x.%d ", bus, dev, func,
+ usb_debug("%02x:%02x.%x %04x:%04x.%d ", bus, dev, func,
pciid >> 16, pciid & 0xFFFF, func);
switch (prog_if) {
case 0x00:
#ifdef CONFIG_USB_UHCI
- printf("UHCI controller\n");
+ usb_debug("UHCI controller\n");
uhci_init (addr);
#else
- printf("UHCI controller (not supported)\n");
+ usb_debug("UHCI controller (not supported)\n");
#endif
break;
case 0x10:
#ifdef CONFIG_USB_OHCI
- printf("OHCI controller\n");
+ usb_debug("OHCI controller\n");
ohci_init(addr);
#else
- printf("OHCI controller (not supported)\n");
+ usb_debug("OHCI controller (not supported)\n");
#endif
break;
case 0x20:
#ifdef CONFIG_USB_EHCI
- printf("EHCI controller\n");
+ usb_debug("EHCI controller\n");
ehci_init(addr);
#else
- printf("EHCI controller (not supported)\n");
+ usb_debug("EHCI controller (not supported)\n");
#endif
break;
case 0x30:
#ifdef CONFIG_USB_XHCI
- printf("xHCI controller\n");
+ usb_debug("xHCI controller\n");
xhci_init(addr);
#else
- printf("xHCI controller (not supported)\n");
+ usb_debug("xHCI controller (not supported)\n");
#endif
break;
default:
- printf("unknown controller %x not supported\n",
+ usb_debug("unknown controller %x not supported\n",
prog_if);
break;
}
diff --git a/payloads/libpayload/drivers/usb/usbmsc.c b/payloads/libpayload/drivers/usb/usbmsc.c
index 7e8b360758..0032f581bb 100644
--- a/payloads/libpayload/drivers/usb/usbmsc.c
+++ b/payloads/libpayload/drivers/usb/usbmsc.c
@@ -143,7 +143,7 @@ reset_transport (usbdev_t *dev)
if (dev->controller->control (dev, OUT, sizeof (dr), &dr, 0, 0) ||
clear_stall (MSC_INST (dev)->bulk_in) ||
clear_stall (MSC_INST (dev)->bulk_out)) {
- printf ("Detaching unresponsive device.\n");
+ usb_debug ("Detaching unresponsive device.\n");
usb_detach_device (dev->controller, dev->address);
return MSC_COMMAND_DETACHED;
}
@@ -394,14 +394,14 @@ read_capacity (usbdev_t *dev)
}
if (count >= 20) {
// still not successful, assume 2tb in 512byte sectors, which is just the same garbage as any other number, but probably more usable.
- printf (" assuming 2 TB with 512-byte sectors as READ CAPACITY didn't answer.\n");
+ usb_debug (" assuming 2 TB with 512-byte sectors as READ CAPACITY didn't answer.\n");
MSC_INST (dev)->numblocks = 0xffffffff;
MSC_INST (dev)->blocksize = 512;
} else {
MSC_INST (dev)->numblocks = ntohl (*(u32 *) buf) + 1;
MSC_INST (dev)->blocksize = ntohl (*(u32 *) (buf + 4));
}
- printf (" %d %d-byte sectors (%d MB)\n", MSC_INST (dev)->numblocks,
+ usb_debug (" %d %d-byte sectors (%d MB)\n", MSC_INST (dev)->numblocks,
MSC_INST (dev)->blocksize,
/* round down high block counts to avoid integer overflow */
MSC_INST (dev)->numblocks > 1000000
@@ -433,7 +433,7 @@ usb_msc_init (usbdev_t *dev)
if (interface->bInterfaceProtocol != 0x50) {
- printf (" Protocol not supported.\n");
+ usb_debug (" Protocol not supported.\n");
return;
}
@@ -441,7 +441,7 @@ usb_msc_init (usbdev_t *dev)
(interface->bInterfaceSubClass != 5) && // ATAPI 8070
(interface->bInterfaceSubClass != 6)) { // SCSI
/* Other protocols, such as ATAPI don't seem to be very popular. looks like ATAPI would be really easy to add, if necessary. */
- printf (" Interface SubClass not supported.\n");
+ usb_debug (" Interface SubClass not supported.\n");
return;
}
@@ -468,11 +468,11 @@ usb_msc_init (usbdev_t *dev)
}
if (MSC_INST (dev)->bulk_in == 0) {
- printf("couldn't find bulk-in endpoint");
+ usb_debug("couldn't find bulk-in endpoint");
return;
}
if (MSC_INST (dev)->bulk_out == 0) {
- printf("couldn't find bulk-out endpoint");
+ usb_debug("couldn't find bulk-out endpoint");
return;
}
usb_debug (" using endpoint %x as in, %x as out\n",
@@ -481,7 +481,7 @@ usb_msc_init (usbdev_t *dev)
usb_debug (" has %d luns\n", get_max_luns (dev) + 1);
- printf (" Waiting for device to become ready...");
+ usb_debug (" Waiting for device to become ready...");
timeout = 30 * 10; /* SCSI/ATA specs say we have to wait up to 30s. Ugh */
while (timeout--) {
switch (test_unit_ready (dev)) {
@@ -490,7 +490,7 @@ usb_msc_init (usbdev_t *dev)
case MSC_COMMAND_FAIL:
mdelay (100);
if (!(timeout % 10))
- printf (".");
+ usb_debug (".");
continue;
default: /* if it's worse return */
return;
@@ -498,9 +498,9 @@ usb_msc_init (usbdev_t *dev)
break;
}
if (timeout < 0) {
- printf ("timeout. Device not ready. Still trying...\n");
+ usb_debug ("timeout. Device not ready. Still trying...\n");
} else {
- printf ("ok.\n");
+ usb_debug ("ok.\n");
}
usb_debug (" spin up");
diff --git a/payloads/libpayload/drivers/usb/xhci.c b/payloads/libpayload/drivers/usb/xhci.c
index 2a8bcb448e..083b331548 100644
--- a/payloads/libpayload/drivers/usb/xhci.c
+++ b/payloads/libpayload/drivers/usb/xhci.c
@@ -120,9 +120,9 @@ xhci_init (pcidev_t addr)
XHCI_INST (controller)->opreg->dcbaap_lo = virt_to_phys(XHCI_INST (controller)->dcbaa);
XHCI_INST (controller)->opreg->dcbaap_hi = 0;
- printf("waiting for controller to be ready - ");
+ usb_debug("waiting for controller to be ready - ");
while ((XHCI_INST (controller)->opreg->usbsts & USBSTS_CNR) != 0) mdelay(1);
- printf("ok.\n");
+ usb_debug("ok.\n");
usb_debug("ERST Max: %lx -> %lx entries\n", XHCI_INST (controller)->capreg->ERST_Max, 1<<(XHCI_INST (controller)->capreg->ERST_Max));