summaryrefslogtreecommitdiff
path: root/payloads/libpayload
diff options
context:
space:
mode:
authorVadim Bendebury <vbendeb@chromium.org>2014-05-27 18:28:59 -0700
committerMarc Jones <marc.jones@se-eng.com>2015-01-06 16:57:30 +0100
commit897123ab2f3bcde00848ae622faeb2ca1e7004f0 (patch)
tree22cbe519a1a71e28199537f265fa89e268d4e775 /payloads/libpayload
parentbc8b4fad1eae6b97b23304871fcdee43c8f360f1 (diff)
downloadcoreboot-897123ab2f3bcde00848ae622faeb2ca1e7004f0.tar.xz
libpayload: ipq808x: introduce uart driver
This adds a UART driver for the ipq8064 controller. It still does not quite work in the receive direction - the receive FIFO returns read data in 32 bit chunks, which means that 4 keys need to be pressed before a character pops out of the driver (and it reports it as a single character). This issue is being addressed separately, the driver is being checked in to facilitate concurrent development. BUG=chrome-os-partner:27784, chrome-os-partner:29313 TEST=with deptcharge modifications in place, the AP148 board comes up to the depthcharge prompt: Starting depthcharge on storm... Original-Change-Id: Ief2cfcca73494be5c4147881144470078adcefb8 Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/202045 Original-Reviewed-by: Deepa Dinamani <deepad@codeaurora.org> Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org> (cherry picked from commit 4499318fb9a4e663c504d7c41380ccf2aa89da29) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I3e07d7568c20c0e570222971ff219de3a6d9b7cc Reviewed-on: http://review.coreboot.org/8061 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'payloads/libpayload')
-rw-r--r--payloads/libpayload/Config.in5
-rw-r--r--payloads/libpayload/configs/defconfig5
-rw-r--r--payloads/libpayload/configs/defconfig-arm3
-rw-r--r--payloads/libpayload/drivers/Makefile.inc1
-rw-r--r--payloads/libpayload/drivers/serial/ipq806x.c363
5 files changed, 375 insertions, 2 deletions
diff --git a/payloads/libpayload/Config.in b/payloads/libpayload/Config.in
index 3c5c342098..f943cb6cba 100644
--- a/payloads/libpayload/Config.in
+++ b/payloads/libpayload/Config.in
@@ -178,6 +178,11 @@ config TEGRA_SERIAL_CONSOLE
depends on SERIAL_CONSOLE
default n
+config IPQ806X_SERIAL_CONSOLE
+ bool "IPQ806x SOC compatible serial port driver"
+ depends on SERIAL_CONSOLE
+ default n
+
config PL011_SERIAL_CONSOLE
bool "PL011 compatible serial port driver"
depends on 8250_SERIAL_CONSOLE
diff --git a/payloads/libpayload/configs/defconfig b/payloads/libpayload/configs/defconfig
index 78f3808101..208bf38d28 100644
--- a/payloads/libpayload/configs/defconfig
+++ b/payloads/libpayload/configs/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# libpayload version: 0.2.0
-# Wed Nov 12 14:25:19 2014
+# Wed Dec 31 11:36:31 2014
#
#
@@ -39,6 +39,8 @@ CONFIG_LP_SERIAL_CONSOLE=y
CONFIG_LP_8250_SERIAL_CONSOLE=y
# CONFIG_LP_S5P_SERIAL_CONSOLE is not set
# CONFIG_LP_TEGRA_SERIAL_CONSOLE is not set
+# CONFIG_LP_IPQ806X_SERIAL_CONSOLE is not set
+# CONFIG_LP_PL011_SERIAL_CONSOLE is not set
CONFIG_LP_SERIAL_IOBASE=0x3f8
# CONFIG_LP_SERIAL_SET_SPEED is not set
# CONFIG_LP_SERIAL_ACS_FALLBACK is not set
@@ -63,6 +65,7 @@ CONFIG_LP_STORAGE_ATA=y
CONFIG_LP_STORAGE_ATAPI=y
CONFIG_LP_STORAGE_AHCI=y
CONFIG_LP_STORAGE_AHCI_ONLY_TESTED=y
+CONFIG_LP_TIMER_RDTSC=y
CONFIG_LP_USB=y
CONFIG_LP_USB_UHCI=y
CONFIG_LP_USB_OHCI=y
diff --git a/payloads/libpayload/configs/defconfig-arm b/payloads/libpayload/configs/defconfig-arm
index 83731bb6b9..1d4fcb0182 100644
--- a/payloads/libpayload/configs/defconfig-arm
+++ b/payloads/libpayload/configs/defconfig-arm
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# libpayload version: 0.2.0
-# Wed Dec 31 11:11:44 2014
+# Wed Dec 31 11:37:12 2014
#
#
@@ -38,6 +38,7 @@ CONFIG_LP_SERIAL_CONSOLE=y
# CONFIG_LP_8250_SERIAL_CONSOLE is not set
# CONFIG_LP_S5P_SERIAL_CONSOLE is not set
# CONFIG_LP_TEGRA_SERIAL_CONSOLE is not set
+# CONFIG_LP_IPQ806X_SERIAL_CONSOLE is not set
# CONFIG_LP_SERIAL_SET_SPEED is not set
# CONFIG_LP_SERIAL_ACS_FALLBACK is not set
CONFIG_LP_VIDEO_CONSOLE=y
diff --git a/payloads/libpayload/drivers/Makefile.inc b/payloads/libpayload/drivers/Makefile.inc
index d46bb11541..538a8a61c4 100644
--- a/payloads/libpayload/drivers/Makefile.inc
+++ b/payloads/libpayload/drivers/Makefile.inc
@@ -36,6 +36,7 @@ libc-$(CONFIG_LP_SPEAKER) += speaker.c
libc-$(CONFIG_LP_8250_SERIAL_CONSOLE) += serial/8250.c
libc-$(CONFIG_LP_S5P_SERIAL_CONSOLE) += serial/s5p.c
libc-$(CONFIG_LP_TEGRA_SERIAL_CONSOLE) += serial/tegra.c
+libc-$(CONFIG_LP_IPQ806X_SERIAL_CONSOLE) += serial/ipq806x.c
libc-$(CONFIG_LP_PC_KEYBOARD) += keyboard.c
diff --git a/payloads/libpayload/drivers/serial/ipq806x.c b/payloads/libpayload/drivers/serial/ipq806x.c
new file mode 100644
index 0000000000..834389ec0e
--- /dev/null
+++ b/payloads/libpayload/drivers/serial/ipq806x.c
@@ -0,0 +1,363 @@
+/*
+ * Copyright (c) 2014 Chromium OS authors
+ */
+
+#include <libpayload.h>
+
+enum IPQ_UART_DM_PARITY_MODE {
+ IPQ_UART_DM_NO_PARITY,
+ IPQ_UART_DM_ODD_PARITY,
+ IPQ_UART_DM_EVEN_PARITY,
+ IPQ_UART_DM_SPACE_PARITY
+};
+
+/* UART Stop Bit Length */
+enum IPQ_UART_DM_STOP_BIT_LEN {
+ IPQ_UART_DM_SBL_9_16,
+ IPQ_UART_DM_SBL_1,
+ IPQ_UART_DM_SBL_1_9_16,
+ IPQ_UART_DM_SBL_2
+};
+
+/* UART Bits per Char */
+enum IPQ_UART_DM_BITS_PER_CHAR {
+ IPQ_UART_DM_5_BPS,
+ IPQ_UART_DM_6_BPS,
+ IPQ_UART_DM_7_BPS,
+ IPQ_UART_DM_8_BPS
+};
+
+#define IPQ_UART_DM_CR(base) (((u8 *)(base)) + 0x10)
+#define IPQ_UART_DM_DMEN(base) (((u8 *)(base)) + 0x3C)
+#define IPQ_UART_DM_DMRX(base) (((u8 *)(base)) + 0x34)
+#define IPQ_UART_DM_HCR(base) (((u8 *)(base)) + 0x24)
+#define IPQ_UART_DM_IMR(base) (((u8 *)(base)) + 0x14)
+#define IPQ_UART_DM_IPR(base) (((u8 *)(base)) + 0x18)
+#define IPQ_UART_DM_IRDA(base) (((u8 *)(base)) + 0x38)
+#define IPQ_UART_DM_MISR(base) (((u8 *)(base)) + 0x10)
+#define IPQ_UART_DM_MR1(base) (((u8 *)(base)) + 0x00)
+#define IPQ_UART_DM_MR2(base) (((u8 *)(base)) + 0x04)
+#define IPQ_UART_DM_NO_CHARS_FOR_TX(base) (((u8 *)(base)) + 0x040)
+#define IPQ_UART_DM_RF(base, x) (((u8 *)(base)) + 0x70 + 4*(x))
+#define IPQ_UART_DM_RFWR(base) (((u8 *)(base)) + 0x20)
+#define IPQ_UART_DM_RX_TOTAL_SNAP(base) (((u8 *)(base)) + 0x38)
+#define IPQ_UART_DM_SR(base) (((u8 *)(base)) + 0x008)
+#define IPQ_UART_DM_TF(base, x) (((u8 *)(base)) + 0x70 + 4*(x))
+#define IPQ_UART_DM_TFWR(base) (((u8 *)(base)) + 0x1C)
+
+#define IPQ_UART_DM_TXLEV (1 << 0)
+#define IPQ_UART_DM_TX_READY (1 << 7)
+
+#define IPQ_UART_DM_CR_CH_CMD_LSB(x) ((x & 0x0f) << 4)
+#define IPQ_UART_DM_CR_CH_CMD_MSB(x) ((x >> 4 ) << 11 )
+#define IPQ_UART_DM_CR_CH_CMD(x) (IPQ_UART_DM_CR_CH_CMD_LSB(x)\
+ | IPQ_UART_DM_CR_CH_CMD_MSB(x))
+
+#define IPQ_UART_DM_CR_GENERAL_CMD(x) ((x) << 8)
+
+#define IPQ_UART_DM_8_N_1_MODE (IPQ_UART_DM_NO_PARITY | \
+ (IPQ_UART_DM_SBL_1 << 2) | \
+ (IPQ_UART_DM_8_BPS << 4))
+#define IPQ_UART_DM_CR_RX_ENABLE (1 << 0)
+#define IPQ_UART_DM_CR_TX_ENABLE (1 << 2)
+#define IPQ_UART_DM_CMD_RESET_RX IPQ_UART_DM_CR_CH_CMD(1)
+#define IPQ_UART_DM_CMD_RESET_TX IPQ_UART_DM_CR_CH_CMD(2)
+#define IPQ_UART_DM_CMD_RESET_ERR_STAT IPQ_UART_DM_CR_CH_CMD(3)
+#define IPQ_UART_DM_CMD_RES_STALE_INT IPQ_UART_DM_CR_CH_CMD(8)
+#define IPQ_UART_DM_CMD_RES_TX_ERR IPQ_UART_DM_CR_CH_CMD(10)
+#define IPQ_UART_DM_GCMD_ENA_STALE_EVT IPQ_UART_DM_CR_GENERAL_CMD(5)
+#define IPQ_UART_DM_RXSTALE (1 << 3)
+#define IPQ_UART_DM_IMR_ENABLED (IPQ_UART_DM_TX_READY | \
+ IPQ_UART_DM_TXLEV | \
+ IPQ_UART_DM_RXSTALE)
+#define IPQ_UART_DM_TFW_VALUE 0
+#define IPQ_UART_DM_RFW_VALUE 1
+#define IPQ_UART_DM_DMRX_DEF_VALUE 0x220
+#define IPQ_UART_DM_SR_TXEMT (1 << 3)
+#define IPQ_UART_DM_SR_UART_OVERRUN (1 << 4)
+#define IPQ_UART_DM_E_SUCCESS 0
+#define IPQ_UART_DM_E_INVAL 3
+#define IPQ_UART_DM_E_RX_NOT_READY 5
+
+#define IPQ_UART_DM_STALE_TIMEOUT_LSB 0x0f
+
+static struct console_input_driver consin = {};
+static struct console_output_driver consout = {};
+
+#define FIFO_DATA_SIZE 4
+
+static void *base_uart_addr;
+
+/*
+ * All constants lifted from u-boot's
+ * board/qcom/ipq806x_cdp/ipq806x_board_param.h
+ */
+static unsigned int msm_boot_uart_dm_init(void *uart_dm_base);
+
+/* Number of pending received characters */
+static int uart_ready_data_count;
+
+/* Received data as it came from 32 bit wide FIFO */
+static unsigned int uart_rx_fifo_word;
+
+/**
+ * msm_boot_uart_dm_init_rx_transfer - Init Rx transfer
+ * @uart_dm_base: UART controller base address
+ */
+static unsigned int msm_boot_uart_dm_init_rx_transfer(void *uart_dm_base)
+{
+ /* Reset receiver */
+ writel(IPQ_UART_DM_CMD_RESET_RX,
+ IPQ_UART_DM_CR(uart_dm_base));
+
+ /* Enable receiver */
+ writel(IPQ_UART_DM_CR_RX_ENABLE,
+ IPQ_UART_DM_CR(uart_dm_base));
+ writel(IPQ_UART_DM_DMRX_DEF_VALUE,
+ IPQ_UART_DM_DMRX(uart_dm_base));
+
+ /* Clear stale event */
+ writel(IPQ_UART_DM_CMD_RES_STALE_INT,
+ IPQ_UART_DM_CR(uart_dm_base));
+
+ /* Enable stale event */
+ writel(IPQ_UART_DM_GCMD_ENA_STALE_EVT,
+ IPQ_UART_DM_CR(uart_dm_base));
+
+ return IPQ_UART_DM_E_SUCCESS;
+}
+
+/**
+ * Reads a word from the RX FIFO or returns not ready.
+ */
+static unsigned msm_boot_uart_dm_read(void)
+{
+ static int total_rx_data = 0;
+ static int rx_data_read = 0;
+ void *base = base_uart_addr;
+ uint32_t status_reg;
+
+ /* RXSTALE means RX FIFO is not empty. */
+ status_reg = readl(IPQ_UART_DM_MISR(base));
+ if (!(status_reg & IPQ_UART_DM_RXSTALE))
+ return IPQ_UART_DM_E_RX_NOT_READY;
+
+ /* Check for Overrun error. We'll just reset Error Status */
+ if (readl(IPQ_UART_DM_SR(base)) &
+ IPQ_UART_DM_SR_UART_OVERRUN) {
+ writel(IPQ_UART_DM_CMD_RESET_ERR_STAT,
+ IPQ_UART_DM_CR(base));
+ total_rx_data = rx_data_read = 0;
+ msm_boot_uart_dm_init(base);
+ return IPQ_UART_DM_E_RX_NOT_READY;
+ }
+
+ /* Clear stale event. */
+ writel(IPQ_UART_DM_CMD_RES_STALE_INT, IPQ_UART_DM_CR(base));
+
+ /* Read UART_DM_RX_TOTAL_SNAP for actual number of bytes received */
+ if (total_rx_data == 0)
+ total_rx_data = readl(IPQ_UART_DM_RX_TOTAL_SNAP(base));
+
+ /* Data available in FIFO; read a word. */
+ uart_rx_fifo_word = readl(IPQ_UART_DM_RF(base, 0));
+
+ /*
+ * TODO(vbendeb): this is wrong and will be addressed shortly: there
+ * should be no zeros returned from the FIFO in case there are
+ * received characters (we don't expect to be receiving zeros).
+ * See http://crosbug.com/p/29313
+ */
+ if (uart_rx_fifo_word == 0) {
+ return IPQ_UART_DM_E_RX_NOT_READY;
+ }
+
+ /* increment the total count of chars we've read so far */
+ rx_data_read += FIFO_DATA_SIZE;
+
+ /* Actual count of valid data in word */
+ uart_ready_data_count =
+ ((total_rx_data < rx_data_read) ?
+ (FIFO_DATA_SIZE - (rx_data_read - total_rx_data)) :
+ FIFO_DATA_SIZE);
+
+ /* If there are still data left in FIFO we'll read them before
+ * initializing RX Transfer again
+ */
+ if (rx_data_read < total_rx_data)
+ return IPQ_UART_DM_E_SUCCESS;
+
+ msm_boot_uart_dm_init_rx_transfer(base);
+ total_rx_data = rx_data_read = 0;
+
+ return IPQ_UART_DM_E_SUCCESS;
+}
+
+void serial_putchar(unsigned data)
+{
+ int num_of_chars = 0;
+ unsigned tx_data = 0;
+ void *base = base_uart_addr;
+
+ if (data == '\n') {
+ num_of_chars++;
+ tx_data = '\r';
+ }
+
+ tx_data |= data << (8 * num_of_chars++);
+
+ /* Wait until transmit FIFO is empty. */
+ while (!(readl(IPQ_UART_DM_SR(base)) &
+ IPQ_UART_DM_SR_TXEMT))
+ udelay(1);
+
+ /*
+ * TX FIFO is ready to accept new character(s). First write number of
+ * characters to be transmitted.
+ */
+ writel(num_of_chars, IPQ_UART_DM_NO_CHARS_FOR_TX(base));
+
+ /* And now write the character(s) */
+ writel(tx_data, IPQ_UART_DM_TF(base, 0));
+}
+
+/*
+ * msm_boot_uart_dm_reset - resets UART controller
+ * @base: UART controller base address
+ */
+static unsigned int msm_boot_uart_dm_reset(void *base)
+{
+ writel(IPQ_UART_DM_CMD_RESET_RX, IPQ_UART_DM_CR(base));
+ writel(IPQ_UART_DM_CMD_RESET_TX, IPQ_UART_DM_CR(base));
+ writel(IPQ_UART_DM_CMD_RESET_ERR_STAT,
+ IPQ_UART_DM_CR(base));
+ writel(IPQ_UART_DM_CMD_RES_TX_ERR, IPQ_UART_DM_CR(base));
+ writel(IPQ_UART_DM_CMD_RES_STALE_INT, IPQ_UART_DM_CR(base));
+
+ return IPQ_UART_DM_E_SUCCESS;
+}
+
+/*
+ * msm_boot_uart_dm_init - initilaizes UART controller
+ * @uart_dm_base: UART controller base address
+ */
+static unsigned int msm_boot_uart_dm_init(void *uart_dm_base)
+{
+ /* Configure UART mode registers MR1 and MR2 */
+ /* Hardware flow control isn't supported */
+ writel(0x0, IPQ_UART_DM_MR1(uart_dm_base));
+
+ /* 8-N-1 configuration: 8 data bits - No parity - 1 stop bit */
+ writel(IPQ_UART_DM_8_N_1_MODE,
+ IPQ_UART_DM_MR2(uart_dm_base));
+
+ /* Configure Interrupt Mask register IMR */
+ writel(IPQ_UART_DM_IMR_ENABLED,
+ IPQ_UART_DM_IMR(uart_dm_base));
+
+ /*
+ * Configure Tx and Rx watermarks configuration registers
+ * TX watermark value is set to 0 - interrupt is generated when
+ * FIFO level is less than or equal to 0
+ */
+ writel(IPQ_UART_DM_TFW_VALUE,
+ IPQ_UART_DM_TFWR(uart_dm_base));
+
+ /* RX watermark value */
+ writel(IPQ_UART_DM_RFW_VALUE,
+ IPQ_UART_DM_RFWR(uart_dm_base));
+
+ /* Configure Interrupt Programming Register */
+ /* Set initial Stale timeout value */
+ writel(IPQ_UART_DM_STALE_TIMEOUT_LSB,
+ IPQ_UART_DM_IPR(uart_dm_base));
+
+ /* Configure IRDA if required */
+ /* Disabling IRDA mode */
+ writel(0x0, IPQ_UART_DM_IRDA(uart_dm_base));
+
+ /* Configure hunt character value in HCR register */
+ /* Keep it in reset state */
+ writel(0x0, IPQ_UART_DM_HCR(uart_dm_base));
+
+ /*
+ * Configure Rx FIFO base address
+ * Both TX/RX shares same SRAM and default is half-n-half.
+ * Sticking with default value now.
+ * As such RAM size is (2^RAM_ADDR_WIDTH, 32-bit entries).
+ * We have found RAM_ADDR_WIDTH = 0x7f
+ */
+
+ /* Issue soft reset command */
+ msm_boot_uart_dm_reset(uart_dm_base);
+
+ /* Enable/Disable Rx/Tx DM interfaces */
+ /* Data Mover not currently utilized. */
+ writel(0, IPQ_UART_DM_DMEN(uart_dm_base));
+
+ /* Enable transmitter */
+ writel(IPQ_UART_DM_CR_TX_ENABLE,
+ IPQ_UART_DM_CR(uart_dm_base));
+
+ /* Initialize Receive Path */
+ msm_boot_uart_dm_init_rx_transfer(uart_dm_base);
+
+ return 0;
+}
+
+/**
+ * serial_havechar - checks if data available for reading
+ *
+ * Returns 1 if data available, 0 otherwise
+ */
+int serial_havechar(void)
+{
+ /* Return if data is already read */
+ if (uart_ready_data_count)
+ return 1;
+
+ /* Read data from the FIFO */
+ if (msm_boot_uart_dm_read() != IPQ_UART_DM_E_SUCCESS)
+ return 0;
+
+ return 1;
+}
+
+/**
+ * ipq806x_serial_getc - reads a character
+ *
+ * Returns the character read from serial port.
+ */
+int serial_getchar(void)
+{
+ uint8_t byte;
+
+ while (!serial_havechar()) {
+ /* wait for incoming data */
+ }
+
+ byte = (uint8_t)(uart_rx_fifo_word & 0xff);
+ uart_rx_fifo_word = uart_rx_fifo_word >> 8;
+ uart_ready_data_count--;
+
+ return byte;
+}
+
+/* For simplicity sake let's rely on coreboot initalizing the UART. */
+void serial_console_init(void)
+{
+ struct cb_serial *sc_ptr = lib_sysinfo.serial;
+
+ if (!sc_ptr)
+ return;
+
+ base_uart_addr = (void *) sc_ptr->baseaddr;
+
+ consin.havekey = serial_havechar;
+ consin.getchar = serial_getchar;
+
+ consout.putchar = serial_putchar;
+
+ console_add_output_driver(&consout);
+ console_add_input_driver(&consin);
+}