summaryrefslogtreecommitdiff
path: root/payloads/libpayload
diff options
context:
space:
mode:
authorNico Huber <nico.huber@secunet.com>2015-09-09 13:27:09 +0200
committerNico Huber <nico.h@gmx.de>2015-09-10 09:19:11 +0000
commita7c609c262d5beba968519903fed297dc4b601c1 (patch)
tree110a3d4d2b0a6b3c6ca302700ed5cc2daf5bcfae /payloads/libpayload
parent602a82af7cb9ad0c41d4470f82a725a9caec46d4 (diff)
downloadcoreboot-a7c609c262d5beba968519903fed297dc4b601c1.tar.xz
libpayload: Fix merge of PL011 UART support
Wished I hadn't seen that. Git saw the conflict (file was gone), both committer and reviewer thought it would be a good idea to re-add it as dead code (see 558e9b5: libpayload: Add minimal support for PL011 UART). Change-Id: Ifea8113fbc59e0463eaedb86b976f54ec11113a9 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/11604 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'payloads/libpayload')
-rw-r--r--payloads/libpayload/drivers/serial.c250
-rw-r--r--payloads/libpayload/drivers/serial/8250.c4
2 files changed, 4 insertions, 250 deletions
diff --git a/payloads/libpayload/drivers/serial.c b/payloads/libpayload/drivers/serial.c
deleted file mode 100644
index a239ecd95c..0000000000
--- a/payloads/libpayload/drivers/serial.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/*
- * This file is part of the libpayload project.
- *
- * Copyright (C) 2008 Advanced Micro Devices, Inc.
- * Copyright (C) 2008 Ulf Jordan <jordan@chalmers.se>
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote products
- * derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- */
-
-#include <libpayload-config.h>
-#include <libpayload.h>
-
-#define IOBASE lib_sysinfo.serial->baseaddr
-#define MEMBASE (phys_to_virt(IOBASE))
-
-static int serial_hardware_is_present = 0;
-static int serial_is_mem_mapped = 0;
-
-static uint8_t serial_read_reg(int offset)
-{
-#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
- if (!serial_is_mem_mapped)
- return inb(IOBASE + offset);
- else
-#endif
- return readb(MEMBASE + offset);
-}
-
-static void serial_write_reg(uint8_t val, int offset)
-{
-#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
- if (!serial_is_mem_mapped)
- outb(val, IOBASE + offset);
- else
-#endif
- writeb(val, MEMBASE + offset);
-}
-
-#if IS_ENABLED(CONFIG_LP_SERIAL_SET_SPEED)
-static void serial_hardware_init(int speed, int word_bits,
- int parity, int stop_bits)
-{
- unsigned char reg;
-
-#ifndef PL011_SERIAL_CONSOLE
- /* Disable interrupts. */
- serial_write_reg(0, 0x01);
-
- /* Assert RTS and DTR. */
- serial_write_reg(3, 0x04);
-
- /* Set the divisor latch. */
- reg = serial_read_reg(0x03);
- serial_write_reg(reg | 0x80, 0x03);
-
- /* Write the divisor. */
- uint16_t divisor = 115200 / speed;
- serial_write_reg(divisor & 0xFF, 0x00);
- serial_write_reg(divisor >> 8, 0x01);
-
- /* Restore the previous value of the divisor.
- * And set 8 bits per character */
- serial_write_reg((reg & ~0x80) | 3, 0x03);
-#endif
-}
-#endif
-
-static struct console_input_driver consin = {
- .havekey = &serial_havechar,
- .getchar = &serial_getchar
-};
-
-static struct console_output_driver consout = {
- .putchar = &serial_putchar
-};
-
-void serial_init(void)
-{
- if (!lib_sysinfo.serial)
- return;
-
- serial_is_mem_mapped =
- (lib_sysinfo.serial->type == CB_SERIAL_TYPE_MEMORY_MAPPED);
-
- if (!serial_is_mem_mapped) {
-#if IS_ENABLED(CONFIG_LP_IO_ADDRESS_SPACE)
- if ((inb(IOBASE + 0x05) == 0xFF) &&
- (inb(IOBASE + 0x06) == 0xFF)) {
- return;
- }
-#else
- printf("IO space mapped serial not supported.");
- return;
-#endif
- }
-
-
- serial_hardware_is_present = 1;
-
-#if IS_ENABLED(CONFIG_LP_SERIAL_SET_SPEED)
- serial_hardware_init(CONFIG_LP_SERIAL_BAUD_RATE, 8, 0, 1);
-#endif
-}
-
-void serial_console_init(void)
-{
- if (!lib_sysinfo.serial)
- return;
-
- serial_init();
-
- console_add_input_driver(&consin);
- console_add_output_driver(&consout);
-}
-
-void serial_putchar(unsigned int c)
-{
- if (!serial_hardware_is_present)
- return;
-#if !IS_ENABLED(CONFIG_LP_PL011_SERIAL_CONSOLE)
- while ((serial_read_reg(0x05) & 0x20) == 0) ;
-#endif
- serial_write_reg(c, 0x00);
-}
-
-int serial_havechar(void)
-{
- if (!serial_hardware_is_present)
- return 0;
- return serial_read_reg(0x05) & 0x01;
-}
-
-int serial_getchar(void)
-{
- if (!serial_hardware_is_present)
- return -1;
- while (!serial_havechar()) ;
- return serial_read_reg(0x00);
-}
-
-/* These are thinly veiled vt100 functions used by curses */
-
-#define VT100_CLEAR "\e[H\e[J"
-/* These defines will fail if you use bold and reverse at the same time.
- * Switching off one of them will switch off both. tinycurses knows about
- * this and does the right thing.
- */
-#define VT100_SBOLD "\e[1m"
-#define VT100_EBOLD "\e[m"
-#define VT100_SREVERSE "\e[7m"
-#define VT100_EREVERSE "\e[m"
-#define VT100_CURSOR_ADDR "\e[%d;%dH"
-#define VT100_CURSOR_ON "\e[?25h"
-#define VT100_CURSOR_OFF "\e[?25l"
-/* The following smacs/rmacs are actually for xterm; a real vt100 has
- enacs=\E(B\E)0, smacs=^N, rmacs=^O. */
-#define VT100_SMACS "\e(0"
-#define VT100_RMACS "\e(B"
-/* A vt100 doesn't do color, setaf/setab below are from xterm-color. */
-#define VT100_SET_COLOR "\e[3%d;4%dm"
-
-static void serial_putcmd(const char *str)
-{
- while (*str)
- serial_putchar(*(str++));
-}
-
-void serial_clear(void)
-{
- serial_putcmd(VT100_CLEAR);
-}
-
-void serial_start_bold(void)
-{
- serial_putcmd(VT100_SBOLD);
-}
-
-void serial_end_bold(void)
-{
- serial_putcmd(VT100_EBOLD);
-}
-
-void serial_start_reverse(void)
-{
- serial_putcmd(VT100_SREVERSE);
-}
-
-void serial_end_reverse(void)
-{
- serial_putcmd(VT100_EREVERSE);
-}
-
-void serial_start_altcharset(void)
-{
- serial_putcmd(VT100_SMACS);
-}
-
-void serial_end_altcharset(void)
-{
- serial_putcmd(VT100_RMACS);
-}
-
-/**
- * Set the foreground and background colors on the serial console.
- *
- * @param fg Foreground color number.
- * @param bg Background color number.
- */
-void serial_set_color(short fg, short bg)
-{
- char buffer[32];
- snprintf(buffer, sizeof(buffer), VT100_SET_COLOR, fg, bg);
- serial_putcmd(buffer);
-}
-
-void serial_set_cursor(int y, int x)
-{
- char buffer[32];
- snprintf(buffer, sizeof(buffer), VT100_CURSOR_ADDR, y + 1, x + 1);
- serial_putcmd(buffer);
-}
-
-void serial_cursor_enable(int state)
-{
- if (state)
- serial_putcmd(VT100_CURSOR_ON);
- else
- serial_putcmd(VT100_CURSOR_OFF);
-}
diff --git a/payloads/libpayload/drivers/serial/8250.c b/payloads/libpayload/drivers/serial/8250.c
index e9550f3e33..7fe9920a6c 100644
--- a/payloads/libpayload/drivers/serial/8250.c
+++ b/payloads/libpayload/drivers/serial/8250.c
@@ -67,6 +67,7 @@ static void serial_hardware_init(int speed, int word_bits,
{
unsigned char reg;
+#if !IS_ENABLED(CONFIG_LP_PL011_SERIAL_CONSOLE)
/* Disable interrupts. */
serial_write_reg(0, 0x01);
@@ -85,6 +86,7 @@ static void serial_hardware_init(int speed, int word_bits,
/* Restore the previous value of the divisor.
* And set 8 bits per character */
serial_write_reg((reg & ~0x80) | 3, 0x03);
+#endif
}
#endif
@@ -139,7 +141,9 @@ void serial_putchar(unsigned int c)
{
if (!serial_hardware_is_present)
return;
+#if !IS_ENABLED(CONFIG_LP_PL011_SERIAL_CONSOLE)
while ((serial_read_reg(0x05) & 0x20) == 0) ;
+#endif
serial_write_reg(c, 0x00);
if (c == '\n')
serial_putchar('\r');