summaryrefslogtreecommitdiff
path: root/src/boot/hardwaremain.c
diff options
context:
space:
mode:
authorLi-Ta Lo <ollie@lanl.gov>2004-03-23 21:28:05 +0000
committerLi-Ta Lo <ollie@lanl.gov>2004-03-23 21:28:05 +0000
commite52666931a3e34895b3f3b92641de9774ab722ec (patch)
tree890bb66a0a16ec7a57230283f000ee91eeb0b384 /src/boot/hardwaremain.c
parent9f46132e9627d24f3ad76619cf3340006a4012fb (diff)
downloadcoreboot-e52666931a3e34895b3f3b92641de9774ab722ec.tar.xz
Doxidization, reformat
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1469 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/boot/hardwaremain.c')
-rw-r--r--src/boot/hardwaremain.c86
1 files changed, 50 insertions, 36 deletions
diff --git a/src/boot/hardwaremain.c b/src/boot/hardwaremain.c
index fed5302261..e3667cccd8 100644
--- a/src/boot/hardwaremain.c
+++ b/src/boot/hardwaremain.c
@@ -37,9 +37,6 @@ it with the version available from LANL.
#include <device/pci.h>
#include <device/chip.h>
#include <delay.h>
-#if 0
-#include <part/mainboard.h>
-#endif
#include <part/hard_reset.h>
#include <smp/atomic.h>
#include <boot/elf.h>
@@ -81,6 +78,12 @@ static struct mem_range *get_ramsize(void)
/* Number of cpus that are currently running in linuxbios */
static atomic_t active_cpus = ATOMIC_INIT(1);
+/**
+ * @brief Initialize secondary processors.
+ *
+ *
+ * @todo move this into a method of per cpu data structure.
+ */
void secondary_cpu_init(void)
{
struct mem_range *mem;
@@ -88,12 +91,14 @@ void secondary_cpu_init(void)
int index;
atomic_inc(&active_cpus);
+
printk_debug("%s\n", __FUNCTION__);
mem = get_ramsize();
id = cpu_initialize(mem);
index = processor_index(id);
printk_debug("%s %d/%u\n", __FUNCTION__ , index, id);
processor_map[index] = CPU_ENABLED;
+
atomic_dec(&active_cpus);
stop_cpu(id);
}
@@ -105,20 +110,22 @@ static void wait_for_other_cpus(void)
old_active_count = 1;
active_count = atomic_read(&active_cpus);
- while(active_count > 1) {
+ while (active_count > 1) {
if (active_count != old_active_count) {
- printk_info("Waiting for %d CPUS to stop\n", active_count);
+ printk_info("Waiting for %d CPUS to stop\n",
+ active_count);
old_active_count = active_count;
}
active_count = atomic_read(&active_cpus);
}
- for(i = 0; i < CONFIG_MAX_CPUS; i++) {
+
+ for (i = 0; i < CONFIG_MAX_CPUS; i++) {
if (!(processor_map[i] & CPU_ENABLED)) {
printk_err("CPU %d did not initialize!\n", i);
processor_map[i] = 0;
-#warning "FIXME do I need a mainboard_cpu_fixup function?"
}
}
+
printk_debug("All AP CPUs stopped\n");
}
@@ -126,20 +133,16 @@ static void wait_for_other_cpus(void)
#define wait_for_other_cpus() do {} while(0)
#endif /* CONFIG_SMP */
+/**
+ * @brief Main program of LinuxBIOS
+ *
+ * @param boot_complete
+ */
void hardwaremain(int boot_complete)
{
/* Processor ID of the BOOT cpu (i.e. the one running this code) */
unsigned long boot_cpu;
int boot_index;
-
- /* the order here is a bit tricky. We don't want to do much of
- * anything that uses config registers until after PciAllocateResources
- * since that function also figures out what kind of config strategy
- * to use (type 1 or type 2).
- * so we turn on cache, then worry about PCI setup, then do other
- * things, so that the other work can use the PciRead* and PciWrite*
- * functions.
- */
struct mem_range *mem, *tmem;
struct lb_memory *lb_mem;
unsigned long totalmem;
@@ -153,8 +156,8 @@ void hardwaremain(int boot_complete)
post_code(0x39);
printk_notice("LinuxBIOS-%s%s %s %s...\n",
- linuxbios_version, linuxbios_extra_version, linuxbios_build,
- (boot_complete)?"rebooting":"booting");
+ linuxbios_version, linuxbios_extra_version,
+ linuxbios_build, (boot_complete)?"rebooting":"booting");
post_code(0x40);
@@ -162,57 +165,68 @@ void hardwaremain(int boot_complete)
if (boot_complete) {
hard_reset();
}
+
CONFIGURE(CONF_PASS_PRE_PCI);
- /* pick how to scan the bus. This is first so we can get at memory size. */
+ /* determine how software can generate PCI configuration transactions
+ * in this system */
printk_info("Finding PCI configuration type.\n");
pci_set_method();
post_code(0x5f);
+
+ /* convert static device structures into dynamic device structures
+ * before probing dynamic devices. */
enumerate_static_devices();
+
+ /* probe the existence of dynamic devices and construct the dynamic
+ * device tree. */
dev_enumerate();
post_code(0x66);
- /* Now do the real bus.
- * We round the total ram up a lot for thing like the SISFB, which
- * shares high memory with the CPU.
- */
+
+ /* probe and assign the resources required by the dynamic devices */
dev_configure();
post_code(0x88);
+ /* enable the resources probed and assigned in dev_configure() */
dev_enable();
+ /* do the device specific init in additional to simple resources
+ * allocation performed in dev_enable() */
dev_initialize();
post_code(0x89);
CONFIGURE(CONF_PASS_POST_PCI);
+ /* this is done last because some devices may 'steal' memory from
+ * the system during device initialization. */
mem = get_ramsize();
post_code(0x70);
- totalmem = 0;
- for(tmem = mem; tmem->sizek; tmem++) {
+ for (totalmem = 0, tmem = mem; tmem->sizek; tmem++) {
totalmem += tmem->sizek;
}
- printk_info("totalram: %ldM\n",
- (totalmem + 512) >> 10); /* Round to the nearest meg */
+ /* Round to the nearest mega */
+ printk_info("totalram: %ldM\n", (totalmem + 512) >> 10);
- /* Fully initialize the cpu before configuring the bus */
+ /* fully initialize the boot processor */
boot_cpu = cpu_initialize(mem);
boot_index = processor_index(boot_cpu);
printk_spew("BOOT CPU is %d\n", boot_cpu);
processor_map[boot_index] = CPU_BOOTPROCESSOR|CPU_ENABLED;
- /* Now start the other cpus initializing
- * The sooner they start the sooner they stop.
- */
+ /* start up other processors, it works like a pthread_create() or
+ * fork(), instead of running the initialization code for all devices
+ * as the boot processor, they start from secondary_cpu_init(), doing
+ * cpu initialization only. */
post_code(0x75);
startup_other_cpus(processor_map);
- post_code(0x77);
- /* make certain we are the only cpu running in linuxBIOS */
+ /* like pthread_join() or wait(), wait other processors finishing
+ * their execution of secondary_cpu_init() and make certain we are
+ * the only cpu running in LinuxBIOS */
wait_for_other_cpus();
- /* Now that we have collected all of our information
- * write our configuration tables.
- */
+ /* Now that we have collected all of our information, write our
+ * configuration tables. */
lb_mem = write_tables(mem, processor_map);
CONFIGURE(CONF_PASS_PRE_BOOT);